Unit PL2303
From Ultibo.org
Return to Unit Reference
Description
Prolific PL2303 USB to Serial Driver unit
The Prolific PL2303 is a USB to serial interface chip used by multiple vendors.
It includes a single serial port with bulk IN and OUT plus interrupt IN endpoints.
Constants
PL2303 specific constants
PL2303_* PL2303_DRIVER_NAME = 'Prolific PL2303 USB to Serial Driver';
|
Name of PL2303 driver |
PL2303_SERIAL_DESCRIPTION = 'Prolific PL2303 USB to Serial';
|
Description of PL2303 device |
PL2303_MIN_BAUD = 75;
|
|
PL2303_MAX_BAUD = 1228800;
|
|
PL2303_MAX_BAUD_HX = 12000000;
|
|
PL2303_MIN_DATABITS = SERIAL_DATA_5BIT;
|
|
PL2303_MAX_DATABITS = SERIAL_DATA_8BIT;
|
|
PL2303_MIN_STOPBITS = SERIAL_STOP_1BIT;
|
|
PL2303_MAX_STOPBITS = SERIAL_STOP_1BIT5;
|
|
PL2303_MAX_PARITY = SERIAL_PARITY_SPACE;
|
|
PL2303_MAX_FLOW = SERIAL_FLOW_DSR_DTR;
|
|
PL2303 device model
PL2303_TYPE_* PL2303_TYPE_01 = 0;
|
Type 0 and 1 (difference unknown) |
PL2303_TYPE_HX = 1;
|
HX version of the PL2303 chip |
PL2303 bulk in/out size
PL2303_BULK_* PL2303_BULK_IN_SIZE = 256;
|
|
PL2303_BULK_OUT_SIZE = 256;
|
PL2303 USB request
PL2303_*_REQUEST PL2303_SET_LINE_REQUEST_TYPE = $21;
|
|
PL2303_SET_LINE_REQUEST = $20;
|
|
PL2303_SET_CONTROL_REQUEST_TYPE = $21;
|
|
PL2303_SET_CONTROL_REQUEST = $22;
|
|
PL2303_CONTROL_DTR = $01;
|
|
PL2303_CONTROL_RTS = $02;
|
|
PL2303_BREAK_REQUEST_TYPE = $21;
|
|
PL2303_BREAK_REQUEST = $23;
|
|
PL2303_BREAK_ON = $ffff;
|
|
PL2303_BREAK_OFF = $0000;
|
|
PL2303_GET_LINE_REQUEST_TYPE = $a1;
|
|
PL2303_GET_LINE_REQUEST = $21;
|
|
PL2303_VENDOR_WRITE_REQUEST_TYPE = $40;
|
|
PL2303_VENDOR_WRITE_REQUEST = $01;
|
|
PL2303_VENDOR_READ_REQUEST_TYPE = $c0;
|
|
PL2303_VENDOR_READ_REQUEST = $01;
|
|
PL2303_UART_STATE_INDEX = 8;
|
|
PL2303_UART_DCD = $01;
|
|
PL2303_UART_DSR = $02;
|
|
PL2303_UART_BREAK_ERROR = $04;
|
|
PL2303_UART_RING = $08;
|
|
PL2303_UART_FRAME_ERROR = $10;
|
|
PL2303_UART_PARITY_ERROR = $20;
|
|
PL2303_UART_OVERRUN_ERROR = $40;
|
|
PL2303_UART_CTS = $80;
|
|
PL2303_UART_STATE_MSR_MASK = PL2303_UART_DCD or PL2303_UART_DSR or PL2303_UART_RING or PL2303_UART_CTS;
|
$8b |
PL2303_UART_STATE_TRANSIENT_MASK = PL2303_UART_BREAK_ERROR or PL2303_UART_FRAME_ERROR or PL2303_UART_PARITY_ERROR or PL2303_UART_OVERRUN_ERROR;
|
$74 |
PL2303 device quirk
PL2303_QUIRK_* PL2303_QUIRK_NONE = $00000000;
|
|
PL2303_QUIRK_UART_STATE_IDX0 = $00000001;
|
|
PL2303_QUIRK_LEGACY = $00000002;
|
|
PL2303_QUIRK_ENDPOINT_HACK = $00000004;
|
PL2303 supported baud rate
PL2303_SUPPORTED_BAUD_RATE_* PL2303_SUPPORTED_BAUD_RATE_COUNT = 25;
|
|
PL2303_SUPPORTED_BAUD_RATES:array[0..PL2303_SUPPORTED_BAUD_RATE_COUNT - 1] of LongWord = (
| |
75,
|
|
150,
|
|
300,
|
|
600,
|
|
1200,
|
|
1800,
|
|
2400,
|
|
3600,
|
|
4800,
|
|
7200,
|
|
9600,
|
|
14400,
|
|
19200,
|
|
28800,
|
|
38400,
|
|
57600,
|
|
115200,
|
|
230400,
|
|
460800,
|
|
614400,
|
|
921600,
|
|
1228800,
|
|
2457600,
|
|
3000000,
|
|
6000000);
|
|
PL2303 vendor and product Id
PL2303_*_ID PL2303_VENDOR_ID = $067b;
|
|
PL2303_PRODUCT_ID = $2303;
|
|
PL2303_PRODUCT_ID_TB = $2304;
|
|
PL2303_PRODUCT_ID_RSAQ2 = $04bb;
|
|
PL2303_PRODUCT_ID_DCU11 = $1234;
|
|
PL2303_PRODUCT_ID_PHAROS = $aaa0;
|
|
PL2303_PRODUCT_ID_RSAQ3 = $aaa2;
|
|
PL2303_PRODUCT_ID_CHILITAG = $aaa8;
|
|
PL2303_PRODUCT_ID_ALDIGA = $0611;
|
|
PL2303_PRODUCT_ID_MMX = $0612;
|
|
PL2303_PRODUCT_ID_GPRS = $0609;
|
|
PL2303_PRODUCT_ID_HCR331 = $331a;
|
|
PL2303_PRODUCT_ID_MOTOROLA = $0307;
|
|
PL2303_PRODUCT_ID_ZTEK = $e1f1;
|
|
PL2303_ATEN_VENDOR_ID = $0557;
|
|
PL2303_ATEN_VENDOR_ID2 = $0547;
|
|
PL2303_ATEN_PRODUCT_ID = $2008;
|
|
PL2303_ATEN_PRODUCT_UC485 = $2021;
|
|
PL2303_ATEN_PRODUCT_UC232B = $2022;
|
|
PL2303_ATEN_PRODUCT_ID2 = $2118;
|
|
PL2303_BENQ_VENDOR_ID = $04a5;
|
|
PL2303_BENQ_PRODUCT_ID_S81 = $4027;
|
|
PL2303_IODATA_VENDOR_ID = $04bb;
|
|
PL2303_IODATA_PRODUCT_ID = $0a03;
|
|
PL2303_IODATA_PRODUCT_ID_RSAQ5 = $0a0e;
|
|
PL2303_ELCOM_VENDOR_ID = $056e;
|
|
PL2303_ELCOM_PRODUCT_ID = $5003;
|
|
PL2303_ELCOM_PRODUCT_ID_UCSGT = $5004;
|
|
PL2303_ITEGNO_VENDOR_ID = $0eba;
|
|
PL2303_ITEGNO_PRODUCT_ID = $1080;
|
|
PL2303_ITEGNO_PRODUCT_ID_2080 = $2080;
|
|
PL2303_MA620_VENDOR_ID = $0df7;
|
|
PL2303_MA620_PRODUCT_ID = $0620;
|
|
PL2303_RATOC_VENDOR_ID = $0584;
|
|
PL2303_RATOC_PRODUCT_ID = $b000;
|
|
PL2303_TRIPP_VENDOR_ID = $2478;
|
|
PL2303_TRIPP_PRODUCT_ID = $2008;
|
|
PL2303_RADIOSHACK_VENDOR_ID = $1453;
|
|
PL2303_RADIOSHACK_PRODUCT_ID = $4026;
|
|
PL2303_DCU10_VENDOR_ID = $0731;
|
|
PL2303_DCU10_PRODUCT_ID = $0528;
|
|
PL2303_SITECOM_VENDOR_ID = $6189;
|
|
PL2303_SITECOM_PRODUCT_ID = $2068;
|
|
| Alcatel OT535/735 USB cable | |
PL2303_ALCATEL_VENDOR_ID = $11f7;
|
|
PL2303_ALCATEL_PRODUCT_ID = $02df;
|
|
PL2303_SIEMENS_VENDOR_ID = $11f5;
|
|
PL2303_SIEMENS_PRODUCT_ID_SX1 = $0001;
|
|
PL2303_SIEMENS_PRODUCT_ID_X65 = $0003;
|
|
PL2303_SIEMENS_PRODUCT_ID_X75 = $0004;
|
|
PL2303_SIEMENS_PRODUCT_ID_EF81 = $0005;
|
|
PL2303_SYNTECH_VENDOR_ID = $0745;
|
|
PL2303_SYNTECH_PRODUCT_ID = $0001;
|
|
| Nokia CA-42 Cable | |
PL2303_NOKIA_CA42_VENDOR_ID = $078b;
|
|
PL2303_NOKIA_CA42_PRODUCT_ID = $1234;
|
|
| CA-42 CLONE Cable www.ca-42.com chipset: Prolific Technology Inc | |
PL2303_CA_42_CA42_VENDOR_ID = $10b5;
|
|
PL2303_CA_42_CA42_PRODUCT_ID = $ac70;
|
|
PL2303_SAGEM_VENDOR_ID = $079b;
|
|
PL2303_SAGEM_PRODUCT_ID = $0027;
|
|
| Leadtek GPS 9531 (ID 0413:2101) | |
PL2303_LEADTEK_VENDOR_ID = $0413;
|
|
PL2303_LEADTEK_9531_PRODUCT_ID = $2101;
|
|
| USB GSM cable from Speed Dragon Multimedia, Ltd | |
PL2303_SPEEDDRAGON_VENDOR_ID = $0e55;
|
|
PL2303_SPEEDDRAGON_PRODUCT_ID = $110b;
|
|
| DATAPILOT Universal-2 Phone Cable | |
PL2303_DATAPILOT_U2_VENDOR_ID = $0731;
|
|
PL2303_DATAPILOT_U2_PRODUCT_ID = $2003;
|
|
| Belkin "F5U257" Serial Adapter | |
PL2303_BELKIN_VENDOR_ID = $050d;
|
|
PL2303_BELKIN_PRODUCT_ID = $0257;
|
|
| Alcor Micro Corp. USB 2.0 TO RS-232 | |
PL2303_ALCOR_VENDOR_ID = $058F;
|
|
PL2303_ALCOR_PRODUCT_ID = $9720;
|
|
| Willcom WS002IN Data Driver (by NetIndex Inc.) | |
PL2303_WS002IN_VENDOR_ID = $11f6;
|
|
PL2303_WS002IN_PRODUCT_ID = $2001;
|
|
| Corega CG-USBRS232R Serial Adapter | |
PL2303_COREGA_VENDOR_ID = $07aa;
|
|
PL2303_COREGA_PRODUCT_ID = $002a;
|
|
| Y.C. Cable U.S.A., Inc - USB to RS-232 | |
PL2303_YCCABLE_VENDOR_ID = $05ad;
|
|
PL2303_YCCABLE_PRODUCT_ID = $0fba;
|
|
| "Superial" USB - Serial | |
PL2303_SUPERIAL_VENDOR_ID = $5372;
|
|
PL2303_SUPERIAL_PRODUCT_ID = $2303;
|
|
| Hewlett-Packard POS Pole Displays | |
PL2303_HP_VENDOR_ID = $03f0;
|
|
PL2303_HP_LM920_PRODUCT_ID = $026b;
|
|
PL2303_HP_TD620_PRODUCT_ID = $0956;
|
|
PL2303_HP_LD960_PRODUCT_ID = $0b39;
|
|
PL2303_HP_LCM220_PRODUCT_ID = $3139;
|
|
PL2303_HP_LCM960_PRODUCT_ID = $3239;
|
|
PL2303_HP_LD220_PRODUCT_ID = $3524;
|
|
PL2303_HP_LD220TA_PRODUCT_ID = $4349;
|
|
PL2303_HP_LD960TA_PRODUCT_ID = $4439;
|
|
PL2303_HP_LM940_PRODUCT_ID = $5039;
|
|
| Cressi Edy (diving computer) PC interface | |
PL2303_CRESSI_VENDOR_ID = $04b8;
|
|
PL2303_CRESSI_EDY_PRODUCT_ID = $0521;
|
|
| Zeagle dive computer interface | |
PL2303_ZEAGLE_VENDOR_ID = $04b8;
|
|
PL2303_ZEAGLE_N2ITION3_PRODUCT_ID = $0522;
|
|
| Sony, USB data cable for CMD-Jxx mobile phones | |
PL2303_SONY_VENDOR_ID = $054c;
|
|
PL2303_SONY_QN3USB_PRODUCT_ID = $0437;
|
|
| Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) | |
PL2303_SANWA_VENDOR_ID = $11ad;
|
|
PL2303_SANWA_PRODUCT_ID = $0001;
|
|
| ADLINK ND-6530 RS232,RS485 and RS422 adapter | |
PL2303_ADLINK_VENDOR_ID = $0b63;
|
|
PL2303_ADLINK_ND6530_PRODUCT_ID = $6530;
|
|
| SMART USB Serial Adapter | |
PL2303_SMART_VENDOR_ID = $0b8c;
|
|
PL2303_SMART_PRODUCT_ID = $2303;
|
|
PL2303 device Id
PL2303_DEVICE_ID_* PL2303_DEVICE_ID_COUNT = 64;
|
Number of supported Device IDs |
PL2303_DEVICE_ID:array[0..PL2303_DEVICE_ID_COUNT - 1] of TUSBDeviceId = (
| |
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_RSAQ2),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_DCU11),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_RSAQ3),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_CHILITAG),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_PHAROS),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_ALDIGA),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_MMX),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_GPRS),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_HCR331),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_MOTOROLA),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_ZTEK),
|
|
(idVendor:PL2303_VENDOR_ID;idProduct:PL2303_PRODUCT_ID_TB),
|
|
(idVendor:PL2303_IODATA_VENDOR_ID;idProduct:PL2303_IODATA_PRODUCT_ID),
|
|
(idVendor:PL2303_IODATA_VENDOR_ID;idProduct:PL2303_IODATA_PRODUCT_ID_RSAQ5),
|
|
(idVendor:PL2303_ATEN_VENDOR_ID;idProduct:PL2303_ATEN_PRODUCT_ID),
|
|
(idVendor:PL2303_ATEN_VENDOR_ID;idProduct:PL2303_ATEN_PRODUCT_UC485),
|
|
(idVendor:PL2303_ATEN_VENDOR_ID;idProduct:PL2303_ATEN_PRODUCT_UC232B),
|
|
(idVendor:PL2303_ATEN_VENDOR_ID;idProduct:PL2303_ATEN_PRODUCT_ID2),
|
|
(idVendor:PL2303_ATEN_VENDOR_ID2;idProduct:PL2303_ATEN_PRODUCT_ID),
|
|
(idVendor:PL2303_ELCOM_VENDOR_ID;idProduct:PL2303_ELCOM_PRODUCT_ID),
|
|
(idVendor:PL2303_ELCOM_VENDOR_ID;idProduct:PL2303_ELCOM_PRODUCT_ID_UCSGT),
|
|
(idVendor:PL2303_ITEGNO_VENDOR_ID;idProduct:PL2303_ITEGNO_PRODUCT_ID),
|
|
(idVendor:PL2303_ITEGNO_VENDOR_ID;idProduct:PL2303_ITEGNO_PRODUCT_ID_2080),
|
|
(idVendor:PL2303_MA620_VENDOR_ID;idProduct:PL2303_MA620_PRODUCT_ID),
|
|
(idVendor:PL2303_RATOC_VENDOR_ID;idProduct:PL2303_RATOC_PRODUCT_ID),
|
|
(idVendor:PL2303_TRIPP_VENDOR_ID;idProduct:PL2303_TRIPP_PRODUCT_ID),
|
|
(idVendor:PL2303_RADIOSHACK_VENDOR_ID;idProduct:PL2303_RADIOSHACK_PRODUCT_ID),
|
|
(idVendor:PL2303_DCU10_VENDOR_ID;idProduct:PL2303_DCU10_PRODUCT_ID),
|
|
(idVendor:PL2303_SITECOM_VENDOR_ID;idProduct:PL2303_SITECOM_PRODUCT_ID),
|
|
(idVendor:PL2303_ALCATEL_VENDOR_ID;idProduct:PL2303_ALCATEL_PRODUCT_ID),
|
|
(idVendor:PL2303_SIEMENS_VENDOR_ID;idProduct:PL2303_SIEMENS_PRODUCT_ID_SX1),
|
PL2303_QUIRK_UART_STATE_IDX0 |
(idVendor:PL2303_SIEMENS_VENDOR_ID;idProduct:PL2303_SIEMENS_PRODUCT_ID_X65),
|
PL2303_QUIRK_UART_STATE_IDX0 |
(idVendor:PL2303_SIEMENS_VENDOR_ID;idProduct:PL2303_SIEMENS_PRODUCT_ID_X75),
|
PL2303_QUIRK_UART_STATE_IDX0 |
(idVendor:PL2303_SIEMENS_VENDOR_ID;idProduct:PL2303_SIEMENS_PRODUCT_ID_EF81),
|
|
(idVendor:PL2303_BENQ_VENDOR_ID;idProduct:PL2303_BENQ_PRODUCT_ID_S81),
|
Benq/Siemens S81 |
(idVendor:PL2303_SYNTECH_VENDOR_ID;idProduct:PL2303_SYNTECH_PRODUCT_ID),
|
|
(idVendor:PL2303_NOKIA_CA42_VENDOR_ID;idProduct:PL2303_NOKIA_CA42_PRODUCT_ID),
|
|
(idVendor:PL2303_CA_42_CA42_VENDOR_ID;idProduct:PL2303_CA_42_CA42_PRODUCT_ID),
|
|
(idVendor:PL2303_SAGEM_VENDOR_ID;idProduct:PL2303_SAGEM_PRODUCT_ID),
|
|
(idVendor:PL2303_LEADTEK_VENDOR_ID;idProduct:PL2303_LEADTEK_9531_PRODUCT_ID),
|
|
(idVendor:PL2303_SPEEDDRAGON_VENDOR_ID;idProduct:PL2303_SPEEDDRAGON_PRODUCT_ID),
|
|
(idVendor:PL2303_DATAPILOT_U2_VENDOR_ID;idProduct:PL2303_DATAPILOT_U2_PRODUCT_ID),
|
|
(idVendor:PL2303_BELKIN_VENDOR_ID;idProduct:PL2303_BELKIN_PRODUCT_ID),
|
|
(idVendor:PL2303_ALCOR_VENDOR_ID;idProduct:PL2303_ALCOR_PRODUCT_ID),
|
|
(idVendor:PL2303_WS002IN_VENDOR_ID;idProduct:PL2303_WS002IN_PRODUCT_ID),
|
|
(idVendor:PL2303_COREGA_VENDOR_ID;idProduct:PL2303_COREGA_PRODUCT_ID),
|
|
(idVendor:PL2303_YCCABLE_VENDOR_ID;idProduct:PL2303_YCCABLE_PRODUCT_ID),
|
|
(idVendor:PL2303_SUPERIAL_VENDOR_ID;idProduct:PL2303_SUPERIAL_PRODUCT_ID),
|
|
(idVendor:PL2303_HP_VENDOR_ID;idProduct:PL2303_HP_LD220_PRODUCT_ID),
|
|
(idVendor:PL2303_HP_VENDOR_ID;idProduct:PL2303_HP_LD220TA_PRODUCT_ID),
|
|
(idVendor:PL2303_HP_VENDOR_ID;idProduct:PL2303_HP_LD960_PRODUCT_ID),
|
|
(idVendor:PL2303_HP_VENDOR_ID;idProduct:PL2303_HP_LD960TA_PRODUCT_ID),
|
|
(idVendor:PL2303_HP_VENDOR_ID;idProduct:PL2303_HP_LCM220_PRODUCT_ID),
|
|
(idVendor:PL2303_HP_VENDOR_ID;idProduct:PL2303_HP_LCM960_PRODUCT_ID),
|
|
(idVendor:PL2303_HP_VENDOR_ID;idProduct:PL2303_HP_LM920_PRODUCT_ID),
|
|
(idVendor:PL2303_HP_VENDOR_ID;idProduct:PL2303_HP_LM940_PRODUCT_ID),
|
|
(idVendor:PL2303_HP_VENDOR_ID;idProduct:PL2303_HP_TD620_PRODUCT_ID),
|
|
(idVendor:PL2303_CRESSI_VENDOR_ID;idProduct:PL2303_CRESSI_EDY_PRODUCT_ID),
|
|
(idVendor:PL2303_ZEAGLE_VENDOR_ID;idProduct:PL2303_ZEAGLE_N2ITION3_PRODUCT_ID),
|
|
(idVendor:PL2303_SONY_VENDOR_ID;idProduct:PL2303_SONY_QN3USB_PRODUCT_ID),
|
|
(idVendor:PL2303_SANWA_VENDOR_ID;idProduct:PL2303_SANWA_PRODUCT_ID),
|
|
(idVendor:PL2303_ADLINK_VENDOR_ID;idProduct:PL2303_ADLINK_ND6530_PRODUCT_ID),
|
|
(idVendor:PL2303_SMART_VENDOR_ID;idProduct:PL2303_SMART_PRODUCT_ID));
|
|
Type definitions
PL2303 specific types
PPL2303SerialDevice = ^TPL2303SerialDevice;
TPL2303SerialDevice = record
| Serial Properties | |
Serial:TSerialDevice;
|
|
| USB Properties | |
Model:LongWord;
|
Device model (eg PL2303_TYPE_01) |
Quirks:LongWord;
|
Unusual behaviours of specific chip versions |
Control:LongWord;
|
Status of the control lines RTS and DTR |
ReceiveSize:LongWord;
|
Maximum Receive size for Bulk IN Endpoint |
TransmitSize:LongWord;
|
Maximum Transmit size for Bulk OUT Endpoint |
ReceiveActive:LongBool;
|
True if a Receive request is currently in progress |
TransmitActive:LongBool;
|
True if a Transmit request is currently in progress |
ReceiveRequest:PUSBRequest;
|
USB request Bulk IN Endpoint |
ReceiveEndpoint:PUSBEndpointDescriptor;
|
PL2303 Bulk IN Endpoint |
TransmitRequest:PUSBRequest;
|
USB request for Bulk OUT Endpoint |
TransmitEndpoint:PUSBEndpointDescriptor;
|
PL2303 Bulk OUT Endpoint |
InterruptRequest:PUSBRequest;
|
USB request for Interrupt IN Endpoint |
InterruptEndpoint:PUSBEndpointDescriptor;
|
PL2303 Interrupt IN Endpoint |
PendingCount:LongWord;
|
Number of USB requests pending for this device |
WaiterThread:TThreadId;
|
Thread waiting for pending requests to complete (for device detachment) |
| Statistics Properties | |
ReceiveComplete:LongWord;
|
|
TransmitComplete:LongWord;
|
|
InterruptComplete:LongWord;
|
|
InterruptErrors:LongWord;
|
|
Public variables
None defined
Function declarations
Initialization functions
procedure PL2303Init;
Description: To be documented
| Note | None documented |
|---|
PL2303 serial functions
function PL2303SerialDeviceOpen(Serial:PSerialDevice; BaudRate,DataBits,StopBits,Parity,FlowControl,ReceiveDepth,TransmitDepth:LongWord):LongWord;
Description: Implementation of SerialDeviceOpen API for PL2303 Serial
| Note | Not intended to be called directly by applications, use SerialDeviceOpen instead. |
|---|
function PL2303SerialDeviceClose(Serial:PSerialDevice):LongWord;
Description: Implementation of SerialDeviceClose API for PL2303 Serial
| Note | Not intended to be called directly by applications, use SerialDeviceClose instead. |
|---|
function PL2303SerialDeviceRead(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: Implementation of SerialDeviceRead API for PL2303 Serial
| Note | Not intended to be called directly by applications, use SerialDeviceRead instead. |
|---|
function PL2303SerialDeviceWrite(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: Implementation of SerialDeviceWrite API for Pl2303 Serial
| Note | Not intended to be called directly by applications, use SerialDeviceWrite instead. |
|---|
PL2303 USB functions
function PL2303DriverBind(Device:PUSBDevice; Interrface:PUSBInterface):LongWord;
Description: Bind the PL2303 driver to a USB device if it is suitable
| Device | The USB device to attempt to bind to |
|---|---|
| Interrface | The USB interface to attempt to bind to (or nil for whole device) |
| Return | USB_STATUS_SUCCESS if completed, USB_STATUS_DEVICE_UNSUPPORTED if unsupported or another error code on failure. |
function PL2303DriverUnbind(Device:PUSBDevice; Interrface:PUSBInterface):LongWord;
Description: Unbind the PL2303 driver from a USB device
| Device | The USB device to unbind from |
|---|---|
| Interrface | The USB interface to unbind from (or nil for whole device) |
| Return | USB_STATUS_SUCCESS if completed or another error code on failure |
procedure PL2303ReceiveStart(Request:PUSBRequest);
Description: Called to continue reception of data to the receive buffer
| Request | The USB receive request to use |
|---|---|
| Note | Caller must hold the lock on the serial device |
procedure PL2303ReceiveWorker(Request:PUSBRequest);
Description: Called (by a Worker thread) to process a completed USB request from the PL2303 bulk IN endpoint
| Request | The USB request which has completed |
|---|
procedure PL2303ReceiveComplete(Request:PUSBRequest);
Description: Called when a USB request from the PL2303 bulk IN endpoint completes
| Request | The USB request which has completed |
|---|---|
| Note | Request is passed to worker thread for processing to prevent blocking the USB completion |
procedure PL2303TransmitStart(Request:PUSBRequest);
Description: Called to continue transmission of data from the transmit buffer
| Request | The USB transmit request to use |
|---|---|
| Note | Caller must hold the lock on the serial device |
procedure PL2303TransmitWorker(Request:PUSBRequest);
Description: Called (by a Worker thread) to process a completed USB request to the PL2303 bulk OUT endpoint
| Request | The USB request which has completed |
|---|
procedure PL2303TransmitComplete(Request:PUSBRequest);
Description: Called when a USB request to the PL2303 bulk OUT endpoint completes
| Request | The USB request which has completed |
|---|---|
| Note | Request is passed to worker thread for processing to prevent blocking the USB completion |
procedure PL2303InterruptWorker(Request:PUSBRequest);
Description: Called (by a Worker thread) to process a completed USB request to the PL2303 interrupt IN endpoint
| Request | The USB request which has completed |
|---|
procedure PL2303InterruptComplete(Request:PUSBRequest);
Description: Called when a USB request from the PL2303 interrupt IN endpoint completes
| Request | The USB request which has completed |
|---|---|
| Note | Request is passed to worker thread for processing to prevent blocking the USB completion |
PL2303 helper functions
function PL2303CheckDevice(Device:PUSBDevice):LongWord;
Description: Check the Vendor and Device ID against the supported devices
| Device | USB device to check |
|---|---|
| Return | USB_STATUS_SUCCESS if completed or another error code on failure |
function PL2303PatchDevice(Device:PUSBDevice; var Model,Quirks:LongWord):LongWord;
Description: Check the USB device for quirks and model information needed by the driver
| Device | USB device to check |
|---|---|
| Return | USB_STATUS_SUCCESS if completed or another error code on failure |
function PL2303VendorRead(Device:PUSBDevice; Value:Word; Data:PByte):LongWord;
Description: Perform a vendor read request to a PL2303 device
| Note | None documented |
|---|
function PL2303VendorWrite(Device:PUSBDevice; Value,Index:Word):LongWord;
Description: Perform a vendor write request to a PL2303 device
| Note | None documented |
|---|
function PL2303GetLineRequest(Device:PUSBDevice; Data:PByte):LongWord;
Description: Perform a get line request to a PL2303 device
| Note | None documented |
|---|
function PL2303SetLineRequest(Device:PUSBDevice; Data:PByte):LongWord;
Description: Perform a set line request to a PL2303 device
| Note | None documented |
|---|
function PL2303SetControlRequest(Device:PUSBDevice; Value:Word):LongWord;
Description: Perform a set control request to a PL2303 device
| Note | None documented |
|---|
function PL2303EncodeBaudRate(Device:PUSBDevice; BaudRate:LongWord; Data:PByte):LongWord;
Description: Encode a baud rate value into the Line Request buffer for a PL2303 device
| Note | None documented |
|---|
function PL2303GetSupportedRate(BaudRate:LongWord):LongWord;
Description: To be documented
| Note | None documented |
|---|
Return to Unit Reference
