Difference between revisions of "Unit PlatformARMv8"

From Ultibo.org
Jump to: navigation, search
 
Line 2,469: Line 2,469:
 
<br />
 
<br />
 
<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 
<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
<pre style="border: 0; padding-bottom:0px;">procedure ARMv8Halt; assembler; nostackframe; public name'_haltproc';</pre>
+
<pre style="border: 0; padding-bottom:0px;">procedure ARMv8Halt; assembler; nostackframe; public name '_haltproc';</pre>
 
<div style="font-size: 14px; padding-left: 12px;">'''Description:''' The purpose of the Wait For Interrupt operation is to put the processor in to a low power state</div>
 
<div style="font-size: 14px; padding-left: 12px;">'''Description:''' The purpose of the Wait For Interrupt operation is to put the processor in to a low power state</div>
 
<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 
<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">

Latest revision as of 01:31, 22 April 2022

Return to Unit Reference


Description


Ultibo Platform Interface unit for ARMv8

The ARMv8 does not support the SWP/SWPB instructions for syncronisation (Lock/Mutex/Semaphore etc) unless enabled.

On ARMv8 Unaligned memory access is always enabled.

On ARMv8 the Extended Page Table format is always enabled.

For usage of barriers (DMB/DSB/ISB) after cache maintenance operations see: ARM.Reference_Manual_1.pdf - Appendix G Barrier Litmus Tests

Note: This unit currently only supports ARMv8 in Aarch32 mode, support for Aarch64 mode will be added in future.

Constants



ARMv8 page tables shift ARMV8_PAGE_TABLES_*
ARMV8_PAGE_TABLES_SHIFT = 10;  


ARMv8 CP15 C0 main Id ARMV8_CP15_C0_MAINID_*
ARMV8_CP15_C0_MAINID_IMPLEMENTOR_MASK = ($FF shl 24);  
ARMV8_CP15_C0_MAINID_VARIANT_MASK = ($F shl 20);  
ARMV8_CP15_C0_MAINID_ARCHITECTURE_MASK = ($F shl 16);  
ARMV8_CP15_C0_MAINID_PARTNUMBER_MASK = ($FFF shl 4);  
ARMV8_CP15_C0_MAINID_REVISION_MASK = ($F shl 0);  
 
ARMV8_CP15_C0_MAINID_IMPLEMENTOR_ARM = ($41 shl 24);  
ARMV8_CP15_C0_MAINID_IMPLEMENTOR_DEC = ($44 shl 24);  
ARMV8_CP15_C0_MAINID_IMPLEMENTOR_FREESCALE = ($4D shl 24);  
ARMV8_CP15_C0_MAINID_IMPLEMENTOR_QUALCOMM = ($51 shl 24);  
ARMV8_CP15_C0_MAINID_IMPLEMENTOR_MARVELL = ($56 shl 24);  
ARMV8_CP15_C0_MAINID_IMPLEMENTOR_INTEL = ($69 shl 24);  
 
ARMV8_CP15_C0_MAINID_ARCHITECTURE_ARMV4 = ($1 shl 16);  
ARMV8_CP15_C0_MAINID_ARCHITECTURE_ARMV4T = ($2 shl 16);  
ARMV8_CP15_C0_MAINID_ARCHITECTURE_ARMV5 = ($3 shl 16);  
ARMV8_CP15_C0_MAINID_ARCHITECTURE_ARMV5T = ($4 shl 16);  
ARMV8_CP15_C0_MAINID_ARCHITECTURE_ARMV5TE = ($5 shl 16);  
ARMV8_CP15_C0_MAINID_ARCHITECTURE_ARMV5TEJ = ($6 shl 16);  
ARMV8_CP15_C0_MAINID_ARCHITECTURE_ARMV6 = ($7 shl 16);  
ARMV8_CP15_C0_MAINID_ARCHITECTURE_CPUID = ($F shl 16);  
 
Cortex A5 to Cortext A17 are ARMv7 part numbers, included here to allow ARMv7 code on ARMv8 in 32bit mode
ARMV8_CP15_C0_MAINID_PARTNUMBER_CORTEX_A5 = ($C05 shl 4);  
ARMV8_CP15_C0_MAINID_PARTNUMBER_CORTEX_A7 = ($C07 shl 4);  
ARMV8_CP15_C0_MAINID_PARTNUMBER_CORTEX_A8 = ($C08 shl 4);  
ARMV8_CP15_C0_MAINID_PARTNUMBER_CORTEX_A9 = ($C09 shl 4);  
ARMV8_CP15_C0_MAINID_PARTNUMBER_CORTEX_A15 = ($C0F shl 4);  
ARMV8_CP15_C0_MAINID_PARTNUMBER_CORTEX_A17 = ($C0E shl 4);  
ARMV8_CP15_C0_MAINID_PARTNUMBER_CORTEX_A53 = ($D03 shl 4);  
ARMV8_CP15_C0_MAINID_PARTNUMBER_CORTEX_A57 = ($D07 shl 4);  
ARMV8_CP15_C0_MAINID_PARTNUMBER_CORTEX_A72 = ($D08 shl 4);  


ARMv8 CP15 C0 multiprocessor affinity ARMV8_CP15_C0_MPID_*
ARMV8_CP15_C0_MPID_MPE = (1 shl 31);  
ARMV8_CP15_C0_MPID_U_UNIPROCESSOR = (1 shl 30);  
ARMV8_CP15_C0_MPID_U_MULTIPROCESSOR = (0 shl 30);  
ARMV8_CP15_C0_MPID_CLUSTERID_MASK = ($F shl 8);  
ARMV8_CP15_C0_MPID_CPUID_MASK = (3 shl 0);  


ARMv8 CP15 C0 cache size Id ARMV8_CP15_C0_CCSID_*
ARMV8_CP15_C0_CCSID_WT = (1 shl 31); Indicates whether the cache level supports Write-Through
ARMV8_CP15_C0_CCSID_WB = (1 shl 30); Indicates whether the cache level supports Write-Back
ARMV8_CP15_C0_CCSID_RA = (1 shl 29); Indicates whether the cache level supports Read-Allocation
ARMV8_CP15_C0_CCSID_WA = (1 shl 28); Indicates whether the cache level supports Write-Allocation
ARMV8_CP15_C0_CCSID_NUMSETS_MASK = ($7FFF shl 13); (Number of sets in cache) - 1, therefore a value of 0 indicates 1 set in the cache. The number of sets does not have to be a power of 2.
ARMV8_CP15_C0_CCSID_NUMWAYS_MASK = ($3FF shl 3); (Associativity of cache) - 1, therefore a value of 0 indicates an associativity of 1. The associativity does not have to be a power of 2.
ARMV8_CP15_C0_CCSID_LINESIZE_MASK = (7 shl 0); (Log2(Number of words in cache line)) -2. (eg For a line length of 8 words: Log2(8) = 3, LineSize entry = 1)
 
ARMV8_CP15_C0_CCSID_NUMSETS_SHIFT = 13;  
ARMV8_CP15_C0_CCSID_NUMWAYS_SHIFT = 3;  


ARMv8 CP15 C0 cache level Id ARMV8_CP15_C0_CLID_*
ARMV8_CP15_C0_CLID_LOUU_MASK = (7 shl 27); Level of Unification Uniprocessor for the cache hierarchy
ARMV8_CP15_C0_CLID_LOC_MASK = (7 shl 24); Level of Coherency for the cache hierarchy}
ARMV8_CP15_C0_CLID_LOUIS_MASK = (7 shl 21); Level of Unification Inner Shareable for the cache hierarchy}
ARMV8_CP15_C0_CLID_CTYPE7_MASK = (7 shl 18); Cache Type fields. Indicate the type of cache implemented at each level, from Level 1 up to a maximum of seven levels of cache hierarchy.
ARMV8_CP15_C0_CLID_CTYPE7_NONE = (0 shl 18); No cache
ARMV8_CP15_C0_CLID_CTYPE7_INSTRUCTION = (1 shl 18); Instruction cache only
ARMV8_CP15_C0_CLID_CTYPE7_DATA = (2 shl 18); Data cache only
ARMV8_CP15_C0_CLID_CTYPE7_SEPARATE = (3 shl 18); Separate instruction and data caches
ARMV8_CP15_C0_CLID_CTYPE7_UNIFIED = (4 shl 18); Unified cache
 
ARMV8_CP15_C0_CLID_CTYPE6_MASK = (7 shl 15); Cache Type fields. Indicate the type of cache implemented at each level, from Level 1 up to a maximum of seven levels of cache hierarchy.
ARMV8_CP15_C0_CLID_CTYPE6_NONE = (0 shl 15); No cache
ARMV8_CP15_C0_CLID_CTYPE6_INSTRUCTION = (1 shl 15); Instruction cache only
ARMV8_CP15_C0_CLID_CTYPE6_DATA = (2 shl 15); Data cache only
ARMV8_CP15_C0_CLID_CTYPE6_SEPARATE = (3 shl 15); Separate instruction and data caches
ARMV8_CP15_C0_CLID_CTYPE6_UNIFIED = (4 shl 15); Unified cache
 
ARMV8_CP15_C0_CLID_CTYPE5_MASK = (7 shl 12); Cache Type fields. Indicate the type of cache implemented at each level, from Level 1 up to a maximum of seven levels of cache hierarchy.
ARMV8_CP15_C0_CLID_CTYPE5_NONE = (0 shl 12); No cache
ARMV8_CP15_C0_CLID_CTYPE5_INSTRUCTION = (1 shl 12); Instruction cache only
ARMV8_CP15_C0_CLID_CTYPE5_DATA = (2 shl 12); Data cache only
ARMV8_CP15_C0_CLID_CTYPE5_SEPARATE = (3 shl 12); Separate instruction and data caches
ARMV8_CP15_C0_CLID_CTYPE5_UNIFIED = (4 shl 12); Unified cache
 
ARMV8_CP15_C0_CLID_CTYPE4_MASK = (7 shl 9); Cache Type fields. Indicate the type of cache implemented at each level, from Level 1 up to a maximum of seven levels of cache hierarchy.
ARMV8_CP15_C0_CLID_CTYPE4_NONE = (0 shl 9); No cache
ARMV8_CP15_C0_CLID_CTYPE4_INSTRUCTION = (1 shl 9); Instruction cache only
ARMV8_CP15_C0_CLID_CTYPE4_DATA = (2 shl 9); Data cache only
ARMV8_CP15_C0_CLID_CTYPE4_SEPARATE = (3 shl 9); Separate instruction and data caches
ARMV8_CP15_C0_CLID_CTYPE4_UNIFIED = (4 shl 9); Unified cache
 
ARMV8_CP15_C0_CLID_CTYPE3_MASK = (7 shl 6); Cache Type fields. Indicate the type of cache implemented at each level, from Level 1 up to a maximum of seven levels of cache hierarchy.
ARMV8_CP15_C0_CLID_CTYPE3_NONE = (0 shl 6); No cache
ARMV8_CP15_C0_CLID_CTYPE3_INSTRUCTION = (1 shl 6); Instruction cache only
ARMV8_CP15_C0_CLID_CTYPE3_DATA = (2 shl 6); Data cache only
ARMV8_CP15_C0_CLID_CTYPE3_SEPARATE = (3 shl 6); Separate instruction and data caches
ARMV8_CP15_C0_CLID_CTYPE3_UNIFIED = (4 shl 6); Unified cache
 
ARMV8_CP15_C0_CLID_CTYPE2_MASK = (7 shl 3); Cache Type fields. Indicate the type of cache implemented at each level, from Level 1 up to a maximum of seven levels of cache hierarchy.
ARMV8_CP15_C0_CLID_CTYPE2_NONE = (0 shl 3); No cache
ARMV8_CP15_C0_CLID_CTYPE2_INSTRUCTION = (1 shl 3); Instruction cache only
ARMV8_CP15_C0_CLID_CTYPE2_DATA = (2 shl 3); Data cache only
ARMV8_CP15_C0_CLID_CTYPE2_SEPARATE = (3 shl 3); Separate instruction and data caches
ARMV8_CP15_C0_CLID_CTYPE2_UNIFIED = (4 shl 3); Unified cache
 
ARMV8_CP15_C0_CLID_CTYPE1_MASK = (7 shl 0); Cache Type fields. Indicate the type of cache implemented at each level, from Level 1 up to a maximum of seven levels of cache hierarchy.
ARMV8_CP15_C0_CLID_CTYPE1_NONE = (0 shl 0); No cache
ARMV8_CP15_C0_CLID_CTYPE1_INSTRUCTION = (1 shl 0); Instruction cache onl
ARMV8_CP15_C0_CLID_CTYPE1_DATA = (2 shl 0); Data cache only
ARMV8_CP15_C0_CLID_CTYPE1_SEPARATE = (3 shl 0); Separate instruction and data caches
ARMV8_CP15_C0_CLID_CTYPE1_UNIFIED = (4 shl 0); Unified cach


ARMv8 CP15 C0 cache size selection ARMV8_CP15_C0_CSSEL_*
ARMV8_CP15_C0_CSSEL_LEVEL1 = (0 shl 1); Cache level of required cache. Permitted values are from 0b000, indicating Level 1 cache, to 0b110 indicating Level 7 cache.
ARMV8_CP15_C0_CSSEL_LEVEL2 = (1 shl 1);  
ARMV8_CP15_C0_CSSEL_LEVEL3 = (2 shl 1);  
ARMV8_CP15_C0_CSSEL_LEVEL4 = (3 shl 1);  
ARMV8_CP15_C0_CSSEL_LEVEL5 = (4 shl 1);  
ARMV8_CP15_C0_CSSEL_LEVEL6 = (5 shl 1);  
ARMV8_CP15_C0_CSSEL_LEVEL7 = (6 shl 1);  
ARMV8_CP15_C0_CSSEL_DATA = (0 shl 0); Instruction not Data bit (0 = Data or unified cache)
ARMV8_CP15_C0_CSSEL_INSTRUCTION = (1 shl 0); Instruction not Data bit (1 = Instruction cache)


ARMv8 CP15 C1 control ARMV8_CP15_C1_*
ARMV8_CP15_C1_TE_BIT = (1 shl 30); Thumb Exception enable. This bit enabled exceptions to be taken in Thumb state when set to 1 (Default 0).
ARMV8_CP15_C1_AFE_BIT = (1 shl 29); Access Flag Enable bit. This bit enables use of the AP[0] bit in the translation table descriptors as an access flag when set to 1 (Default 0).
ARMV8_CP15_C1_TRE_BIT = (1 shl 28); TEX remap enabled when set to 1 (TEX[2:1] become page table bits for OS) (Default 0)
ARMV8_CP15_C1_NMFI_BIT = (1 shl 27); Non-maskable Fast Interrupts enabled when set to 1 (Default 0)
ARMV8_CP15_C1_EE_BIT = (1 shl 25); CPSR E bit is set to 1 on an exception when set to 1 (Default 0)
ARMV8_CP15_C1_VE_BIT = (1 shl 24); Interrupt vectors are defined by the VIC interface when set to 1 (Default 0)
ARMV8_CP15_C1_U_BIT = (1 shl 22); Unaligned data access support enabled when set to 1 (Always 1 in ARMv8). The processor permits unaligned loads and stores and support for mixed endian data is enabled.
ARMV8_CP15_C1_FI_BIT = (1 shl 21); Low interrupt latency configuration enabled when set to 1 (Default 0)
ARMV8_CP15_C1_UWXN_BIT = (1 shl 20); Unprivileged write permission implies Execute Never (XN) when set to 1 (Default 0)(Cortext-A7 MPCore)
ARMV8_CP15_C1_WXN_BIT = (1 shl 19); Write permission implies Execute Never (XN) when set to 1 (Default 0)(Cortext-A7 MPCore)
ARMV8_CP15_C1_HA_BIT = (1 shl 17); Hardware Access Flag Enable bit. If the implementation provides hardware management of the access flag this bit enables the access flag management (Default 0).
ARMV8_CP15_C1_RR_BIT = (1 shl 14); Predictable cache replacement strategy by round-robin replacement when set to 1 (Default 0)
ARMV8_CP15_C1_V_BIT= (1 shl 13); High exception vectors selected when set to 1, address range = 0xFFFF0000-0xFFFF001C (Default 0).
ARMV8_CP15_C1_I_BIT = (1 shl 12); L1 Instruction Cache enabled when set to 1 (Default 0)
ARMV8_CP15_C1_Z_BIT = (1 shl 11); Branch prediction enabled when set to 1 (Default 0)(Always Enabled on Cortext-A7 MPCore)
ARMV8_CP15_C1_SW_BIT = (1 shl 10); SWP/SWPB Enable bit. This bit enables the use of SWP and SWPB instructions when set to 1 (Default 0).
ARMV8_CP15_C1_B_BIT = (1 shl 7); Big-endian word-invariant memory system when set to 1 (Always 0 in ARMv8)
ARMV8_CP15_C1_C_BIT = (1 shl 2); L1 Data cache enabled when set to 1 (Default 0)
ARMV8_CP15_C1_A_BIT = (1 shl 1); Strict alignment fault checking enabled when set to 1 (Default 0)
ARMV8_CP15_C1_M_BIT = (1 shl 0); MMU enabled when set to 1 (Default 0)


ARMv8 CP15 C1 auxiliary control ARMV8_CP15_C1_AUX_*
ARMV8_CP15_C1_AUX_DDI = (1 shl 28); Disable dual issue when set to 1 (Default 0)
ARMV8_CP15_C1_AUX_DDVM = (1 shl 15); Disable Distributed Virtual Memory (DVM) transactions when set to 1 (Default 0)
ARMV8_CP15_C1_AUX_L1PCTL_0 = (0 shl 13); L1 Data prefetch control, Prefetch disabled
ARMV8_CP15_C1_AUX_L1PCTL_1 = (1 shl 13); L1 Data prefetch control, 1 outstanding pre-fetch permitted
ARMV8_CP15_C1_AUX_L1PCTL_2 = (2 shl 13); L1 Data prefetch control, 2 outstanding pre-fetches permitted
ARMV8_CP15_C1_AUX_L1PCTL_3 = (3 shl 13); L1 Data prefetch control, 3 outstanding pre-fetches permitted, this is the reset value (Default)
ARMV8_CP15_C1_AUX_L1RADIS = (1 shl 12); L1 Data Cache read-allocate mode disable when set to 1 (Default 0)
ARMV8_CP15_C1_AUX_L2RADIS = (1 shl 11); L2 Data Cache read-allocate mode disable when set to 1 (Default 0)
ARMV8_CP15_C1_AUX_DODMBS = (1 shl 10); Disable optimized data memory barrier behavior when set to 1 (Default 0)
ARMV8_CP15_C1_AUX_SMP = (1 shl 6); Enables coherent requests to the processor when set to 1 (Default 0). You must ensure this bit is set to 1 before the caches and MMU are enabled, or any cache and TLB maintenance operations are performed.
 
ARMV8_CP15_C1_AUX_FW = (1 shl 0); Cache and TLB maintenance broadcast enabled when set to 1 (Default 0) (Cortex-A9 Only)


ARMv8 CP15 C1 coprocessor access control ARMV8_CP15_C1_CP*
ARMV8_CP15_C1_COPRO_ASEDIS = (1 shl 31); Disable Advanced SIMD Functionality when set to 1 (Default 0)
ARMV8_CP15_C1_COPRO_D32DIS = (1 shl 30); Disable use of D16-D31 of the VFP register file when set to 1 (Default 0)
 
ARMV8_CP15_C1_CP0_NONE = (0 shl 0); Access denied (Default)
ARMV8_CP15_C1_CP0_SYS = (1 shl 0); Privileged mode access only
ARMV8_CP15_C1_CP0_USER = (3 shl 0); Privileged and User mode access
 
ARMV8_CP15_C1_CP1_NONE = (0 shl 2); Access denied (Default)
ARMV8_CP15_C1_CP1_SYS = (1 shl 2); Privileged mode access only
ARMV8_CP15_C1_CP1_USER = (3 shl 2); Privileged and User mode access
 
ARMV8_CP15_C1_CP2_NONE = (0 shl 4); Access denied (Default)
ARMV8_CP15_C1_CP2_SYS = (1 shl 4); Privileged mode access only
ARMV8_CP15_C1_CP2_USER = (3 shl 4); Privileged and User mode access
 
ARMV8_CP15_C1_CP3_NONE = (0 shl 6); Access denied (Default)
ARMV8_CP15_C1_CP3_SYS = (1 shl 6); Privileged mode access only
ARMV8_CP15_C1_CP3_USER = (3 shl 6); Privileged and User mode access
 
ARMV8_CP15_C1_CP4_NONE = (0 shl 8); Access denied (Default)
ARMV8_CP15_C1_CP4_SYS = (1 shl 8); Privileged mode access only
ARMV8_CP15_C1_CP4_USER = (3 shl 8); Privileged and User mode access
 
ARMV8_CP15_C1_CP5_NONE = (0 shl 10); Access denied (Default)
ARMV8_CP15_C1_CP5_SYS = (1 shl 10); Privileged mode access only
ARMV8_CP15_C1_CP5_USER = (3 shl 10); Privileged and User mode access
 
ARMV8_CP15_C1_CP6_NONE = (0 shl 12); Access denied (Default)
ARMV8_CP15_C1_CP6_SYS = (1 shl 12); Privileged mode access only
ARMV8_CP15_C1_CP6_USER = (3 shl 12); Privileged and User mode access
 
ARMV8_CP15_C1_CP7_NONE = (0 shl 14); Access denied (Default)
ARMV8_CP15_C1_CP7_SYS = (1 shl 14); Privileged mode access only
ARMV8_CP15_C1_CP7_USER = (3 shl 14); Privileged and User mode access
 
ARMV8_CP15_C1_CP8_NONE = (0 shl 16); Access denied (Default)
ARMV8_CP15_C1_CP8_SYS = (1 shl 16); Privileged mode access only
ARMV8_CP15_C1_CP8_USER = (3 shl 16); Privileged and User mode access
 
ARMV8_CP15_C1_CP9_NONE = (0 shl 18); Access denied (Default)
ARMV8_CP15_C1_CP9_SYS = (1 shl 18); Privileged mode access only
ARMV8_CP15_C1_CP9_USER = (3 shl 18); Privileged and User mode access
 
ARMV8_CP15_C1_CP10_NONE = (0 shl 20); Access denied (Default)
ARMV8_CP15_C1_CP10_SYS = (1 shl 20); Privileged mode access only
ARMV8_CP15_C1_CP10_USER = (3 shl 20); Privileged and User mode access
 
ARMV8_CP15_C1_CP11_NONE = (0 shl 22); Access denied (Default)
ARMV8_CP15_C1_CP11_SYS = (1 shl 22); Privileged mode access only
ARMV8_CP15_C1_CP11_USER = (3 shl 22); Privileged and User mode access
 
ARMV8_CP15_C1_CP12_NONE = (0 shl 24); Access denied (Default)
ARMV8_CP15_C1_CP12_SYS = (1 shl 24); Privileged mode access only
ARMV8_CP15_C1_CP12_USER = (3 shl 24); Privileged and User mode access
 
ARMV8_CP15_C1_CP13_NONE = (0 shl 26); Access denied (Default)
ARMV8_CP15_C1_CP13_SYS = (1 shl 26); Privileged mode access only
ARMV8_CP15_C1_CP13_USER = (3 shl 26); Privileged and User mode access
Coprocessors CP14 (Debug Control) and CP15 (System Control) are not affected by the Coprocessor Access Control Register


ARMv8 CP15 C1 secure configuration ARMV8_CP15_C1_SCR_*
ARMV8_CP15_C1_SCR_SIF = (1 shl 9); Secure Instruction Fetch bit
ARMV8_CP15_C1_SCR_HCE = (1 shl 8); Hyp Call enable. This bit enables the use of HVC instruction from Non-secure PL1 modes.
ARMV8_CP15_C1_SCR_SCD = (1 shl 7); Secure Monitor Call disable. This bit causes the SMC instruction to be UNDEFINED in Non-secure state.
ARMV8_CP15_C1_SCR_NET = (1 shl 6); Not Early Termination. This bit disables early termination of data operations.
ARMV8_CP15_C1_SCR_AW = (1 shl 5); A bit writable. This bit controls whether the A bit in the CPSR can be modified in Non-secure state.
ARMV8_CP15_C1_SCR_FW = (1 shl 4); F bit writable. This bit controls whether the F bit in the CPSR can be modified in Non-secure state.
ARMV8_CP15_C1_SCR_EA = (1 shl 3); External Abort handler. This bit controls which mode takes external aborts.
ARMV8_CP15_C1_SCR_FIQ = (1 shl 2); FIQ handler. This bit controls which mode takes FIQ exceptions.
ARMV8_CP15_C1_SCR_IRQ = (1 shl 1); IRQ handler. This bit controls which mode takes IRQ exceptions.
ARMV8_CP15_C1_SCR_NS = (1 shl 0); Non Secure bit. Except when the processor is in Monitor mode, this bit determines the security state of the processor.


ARMv8 CP15 C2 translation table base ARMV8_CP15_C2_TTBR_*
ARMV8_CP15_C2_TTBR_BASE_MASK = $FFFFC000;  
ARMV8_CP15_C2_TTBR_NOS = (1 shl 5); Not Outer Shareable bit (0 Outer Shareable/1 Inner Shareable)
ARMV8_CP15_C2_TTBR_RGN_OUTER_NONCACHED = (0 shl 3); Normal Outer Noncacheable (Default)
ARMV8_CP15_C2_TTBR_RGN_OUTER_WRITE_ALLOCATE = (1 shl 3); Normal Outer Write-back, Write Allocate
ARMV8_CP15_C2_TTBR_RGN_OUTER_WRITE_THROUGH = (2 shl 3); Normal Outer Write-through, No Allocate on Write
ARMV8_CP15_C2_TTBR_RGN_OUTER_WRITE_BACK = (3 shl 3); Normal Outer Write-back, No Allocate on Write
ARMV8_CP15_C2_TTBR_IMP = (1 shl 2); The effect of this bit is IMPLEMENTATION DEFINED
ARMV8_CP15_C2_TTBR_S = (1 shl 1); Shareable bit (0 Non Shareable/1 Shareable)
ARMV8_CP15_C2_TTBR_C_INNER_CACHED = (1 shl 0); Cacheable bit (0 Inner Non Cacheable/1 Inner Cacheable) (ARMv8-A base only)
ARMV8_CP15_C2_TTBR_IRGN_INNER_NONCACHED = (0 shl 6) or (0 shl 0); Normal Inner Noncacheable (Default)
ARMV8_CP15_C2_TTBR_IRGN_INNER_WRITE_ALLOCATE = (1 shl 6) or (0 shl 0); Normal Inner Write-Back Write-Allocate Cacheable
ARMV8_CP15_C2_TTBR_IRGN_INNER_WRITE_THROUGH = (0 shl 6) or (1 shl 0); Normal Inner Write-Through Cacheable
ARMV8_CP15_C2_TTBR_IRGN_INNER_WRITE_BACK = (1 shl 6) or (1 shl 0); Normal Inner Write-Back no Write-Allocate Cacheable


ARMv8 CP15 C3 domain access control ARMV8_CP15_C3_DOMAIN*
ARMV8_CP15_C3_DOMAIN0_NONE = (0 shl 0); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN0_CLIENT = (1 shl 0); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN0_MANAGER = (3 shl 0); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN1_NONE = (0 shl 2); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN1_CLIENT = (1 shl 2); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN1_MANAGER = (3 shl 2); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN2_NONE = (0 shl 4); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN2_CLIENT = (1 shl 4); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN2_MANAGER = (3 shl 4); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN3_NONE = (0 shl 6); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN3_CLIENT = (1 shl 6); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN3_MANAGER = (3 shl 6); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN4_NONE = (0 shl 8); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN4_CLIENT = (1 shl 8); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN4_MANAGER = (3 shl 8); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN5_NONE = (0 shl 10); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN5_CLIENT = (1 shl 10); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN5_MANAGER = (3 shl 10); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN6_NONE = (0 shl 12); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN6_CLIENT = (1 shl 12); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN6_MANAGER = (3 shl 12); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN7_NONE = (0 shl 14); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN7_CLIENT = (1 shl 14); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN7_MANAGER = (3 shl 14); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN8_NONE = (0 shl 16); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN8_CLIENT = (1 shl 16); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN8_MANAGER = (3 shl 16); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN9_NONE = (0 shl 18); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN9_CLIENT = (1 shl 18); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN9_MANAGER = (3 shl 18); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN10_NONE = (0 shl 20); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN10_CLIENT = (1 shl 20); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN10_MANAGER = (3 shl 20); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN11_NONE = (0 shl 22); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN11_CLIENT = (1 shl 22); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN11_MANAGER = (3 shl 22); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN12_NONE = (0 shl 24); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN12_CLIENT = (1 shl 24); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN12_MANAGER = (3 shl 24); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN13_NONE = (0 shl 26); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN13_CLIENT = (1 shl 26); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN13_MANAGER = (3 shl 26); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN14_NONE = (0 shl 28); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN14_CLIENT = (1 shl 28); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN14_MANAGER = (3 shl 28); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
 
ARMV8_CP15_C3_DOMAIN15_NONE = (0 shl 30); No access, Any access generates a domain fault (Default)
ARMV8_CP15_C3_DOMAIN15_CLIENT = (1 shl 30); Client, Accesses are checked against the access permission bits in the TLB entry
ARMV8_CP15_C3_DOMAIN15_MANAGER = (3 shl 30); Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated


ARMv8 CP15 C10 primary region remap ARMV8_CP15_C10_PRRR_*
ARMV8_CP15_C10_PRRR_NOS7 = (1 shl 31); Outer Shareable property mapping for memory attributes 7, if the region is mapped as Normal Shareable (0 Outer Shareable/1 Inner Shareable)
ARMV8_CP15_C10_PRRR_NOS6 = (1 shl 30); Outer Shareable property mapping for memory attributes 6, if the region is mapped as Normal Shareable (0 Outer Shareable/1 Inner Shareable)
ARMV8_CP15_C10_PRRR_NOS5 = (1 shl 29); Outer Shareable property mapping for memory attributes 5, if the region is mapped as Normal Shareable (0 Outer Shareable/1 Inner Shareable)
ARMV8_CP15_C10_PRRR_NOS4 = (1 shl 28); Outer Shareable property mapping for memory attributes 4, if the region is mapped as Normal Shareable (0 Outer Shareable/1 Inner Shareable)
ARMV8_CP15_C10_PRRR_NOS3 = (1 shl 27); Outer Shareable property mapping for memory attributes 3, if the region is mapped as Normal Shareable (0 Outer Shareable/1 Inner Shareable)
ARMV8_CP15_C10_PRRR_NOS2 = (1 shl 26); Outer Shareable property mapping for memory attributes 2, if the region is mapped as Normal Shareable (0 Outer Shareable/1 Inner Shareable)
ARMV8_CP15_C10_PRRR_NOS1 = (1 shl 25); Outer Shareable property mapping for memory attributes 1, if the region is mapped as Normal Shareable (0 Outer Shareable/1 Inner Shareable)
ARMV8_CP15_C10_PRRR_NOS0 = (1 shl 24); Outer Shareable property mapping for memory attributes 0, if the region is mapped as Normal Shareable (0 Outer Shareable/1 Inner Shareable)
ARMV8_CP15_C10_PRRR_NS1 = (1 shl 19); Mapping of S = 1 attribute for Normal memory (0 Not Sharable/1 Shareable)
ARMV8_CP15_C10_PRRR_NS0 = (1 shl 18); Mapping of S = 0 attribute for Normal memory (0 Not Sharable/1 Shareable)
ARMV8_CP15_C10_PRRR_DS1 = (1 shl 17); Mapping of S = 1 attribute for Device memory (This field has no significance in the Cortex-A7)
ARMV8_CP15_C10_PRRR_DS0 = (1 shl 16); Mapping of S = 0 attribute for Device memory (This field has no significance in the Cortex-A7)
ARMV8_CP15_C10_PRRR_TR7_STRONGLY_ORDERED = (0 shl 14); Primary TEX mapping for memory attributes 7 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR7_DEVICE = (1 shl 14); Primary TEX mapping for memory attributes 7 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR7_NORMAL = (2 shl 14); Primary TEX mapping for memory attributes 7 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR6_STRONGLY_ORDERED = (0 shl 12); Primary TEX mapping for memory attributes 6 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR6_DEVICE = (1 shl 12); Primary TEX mapping for memory attributes 6 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR6_NORMAL = (2 shl 12); Primary TEX mapping for memory attributes 6 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR5_STRONGLY_ORDERED = (0 shl 10); Primary TEX mapping for memory attributes 5 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR5_DEVICE = (1 shl 10); Primary TEX mapping for memory attributes 5 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR5_NORMAL = (2 shl 10); Primary TEX mapping for memory attributes 5 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR4_STRONGLY_ORDERED = (0 shl 8); Primary TEX mapping for memory attributes 4 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR4_DEVICE = (1 shl 8); Primary TEX mapping for memory attributes 4 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR4_NORMAL = (2 shl 8); Primary TEX mapping for memory attributes 4 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR3_STRONGLY_ORDERED = (0 shl 6); Primary TEX mapping for memory attributes 3 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR3_DEVICE = (1 shl 6); Primary TEX mapping for memory attributes 3 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR3_NORMAL = (2 shl 6); Primary TEX mapping for memory attributes 3 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR2_STRONGLY_ORDERED = (0 shl 4); Primary TEX mapping for memory attributes 2 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR2_DEVICE = (1 shl 4); Primary TEX mapping for memory attributes 2 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR2_NORMAL = (2 shl 4); Primary TEX mapping for memory attributes 2 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR1_STRONGLY_ORDERED = (0 shl 2); Primary TEX mapping for memory attributes 1 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR1_DEVICE = (1 shl 2); Primary TEX mapping for memory attributes 1 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR1_NORMAL = (2 shl 2); Primary TEX mapping for memory attributes 1 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR0_STRONGLY_ORDERED = (0 shl 0); Primary TEX mapping for memory attributes 0 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR0_DEVICE = (1 shl 0); Primary TEX mapping for memory attributes 0 (The value of the TEX[0], C and B bits)
ARMV8_CP15_C10_PRRR_TR0_NORMAL = (2 shl 0); Primary TEX mapping for memory attributes 0 (The value of the TEX[0], C and B bits)
 
ARMV8_CP15_C10_PRRR_MASK = ARMV8_CP15_C10_PRRR_NOS7 or ARMV8_CP15_C10_PRRR_NOS6 or ARMV8_CP15_C10_PRRR_NOS5 or ARMV8_CP15_C10_PRRR_NOS4 TR0 to TR7 Inner Shareable
 
or ARMV8_CP15_C10_PRRR_NOS3 or ARMV8_CP15_C10_PRRR_NOS2 or ARMV8_CP15_C10_PRRR_NOS1 or ARMV8_CP15_C10_PRRR_NOS0  
 
or ARMV8_CP15_C10_PRRR_NS1 or ARMV8_CP15_C10_PRRR_DS1 S bit controls Shareable for Normal and Device memory
 
or ARMV8_CP15_C10_PRRR_TR0_STRONGLY_ORDERED TR0 is Strongly Ordered
 
or ARMV8_CP15_C10_PRRR_TR1_NORMAL or ARMV8_CP15_C10_PRRR_TR2_NORMAL or ARMV8_CP15_C10_PRRR_TR3_NORMAL TR1/2/3 are Normal
 
or ARMV8_CP15_C10_PRRR_TR4_DEVICE TR4 is Device
 
or ARMV8_CP15_C10_PRRR_TR7_NORMAL; TR7 is Normal


ARMv8 CP15 C10 normal memory remap ARMV8_CP15_C10_NMRR_*
ARMV8_CP15_C10_NMRR_OR7_NONCACHED = (0 shl 30); Outer Cacheable property mapping for memory attributes 7, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR7_WRITE_ALLOCATE = (1 shl 30); Outer Cacheable property mapping for memory attributes 7, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR7_WRITE_THROUGH = (2 shl 30); Outer Cacheable property mapping for memory attributes 7, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR7_WRITE_BACK = (3 shl 30); Outer Cacheable property mapping for memory attributes 7, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR6_NONCACHED = (0 shl 28); Outer Cacheable property mapping for memory attributes 6, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR6_WRITE_ALLOCATE = (1 shl 28); Outer Cacheable property mapping for memory attributes 6, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR6_WRITE_THROUGH = (2 shl 28); Outer Cacheable property mapping for memory attributes 6, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR6_WRITE_BACK = (3 shl 28); Outer Cacheable property mapping for memory attributes 6, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR5_NONCACHED = (0 shl 26); Outer Cacheable property mapping for memory attributes 5, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR5_WRITE_ALLOCATE = (1 shl 26); Outer Cacheable property mapping for memory attributes 5, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR5_WRITE_THROUGH = (2 shl 26); Outer Cacheable property mapping for memory attributes 5, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR5_WRITE_BACK = (3 shl 26); Outer Cacheable property mapping for memory attributes 5, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR4_NONCACHED = (0 shl 24); Outer Cacheable property mapping for memory attributes 4, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR4_WRITE_ALLOCATE = (1 shl 24); Outer Cacheable property mapping for memory attributes 4, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR4_WRITE_THROUGH = (2 shl 24); Outer Cacheable property mapping for memory attributes 4, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR4_WRITE_BACK = (3 shl 24); Outer Cacheable property mapping for memory attributes 4, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR3_NONCACHED = (0 shl 22); Outer Cacheable property mapping for memory attributes 3, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR3_WRITE_ALLOCATE = (1 shl 22); Outer Cacheable property mapping for memory attributes 3, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR3_WRITE_THROUGH = (2 shl 22); Outer Cacheable property mapping for memory attributes 3, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR3_WRITE_BACK = (3 shl 22); Outer Cacheable property mapping for memory attributes 3, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR2_NONCACHED = (0 shl 20); Outer Cacheable property mapping for memory attributes 2, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR2_WRITE_ALLOCATE = (1 shl 20); Outer Cacheable property mapping for memory attributes 2, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR2_WRITE_THROUGH = (2 shl 20); Outer Cacheable property mapping for memory attributes 2, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR2_WRITE_BACK = (3 shl 20); Outer Cacheable property mapping for memory attributes 2, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR1_NONCACHED = (0 shl 18); Outer Cacheable property mapping for memory attributes 1, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR1_WRITE_ALLOCATE = (1 shl 18); Outer Cacheable property mapping for memory attributes 1, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR1_WRITE_THROUGH = (2 shl 18); Outer Cacheable property mapping for memory attributes 1, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR1_WRITE_BACK = (3 shl 18); Outer Cacheable property mapping for memory attributes 1, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR0_NONCACHED = (0 shl 16); Outer Cacheable property mapping for memory attributes 0, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR0_WRITE_ALLOCATE = (1 shl 16); Outer Cacheable property mapping for memory attributes 0, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR0_WRITE_THROUGH = (2 shl 16); Outer Cacheable property mapping for memory attributes 0, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_OR0_WRITE_BACK = (3 shl 16); Outer Cacheable property mapping for memory attributes 0, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR7_NONCACHED = (0 shl 14); Inner Cacheable property mapping for memory attributes 7, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR7_WRITE_ALLOCATE = (1 shl 14); Inner Cacheable property mapping for memory attributes 7, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR7_WRITE_THROUGH = (2 shl 14); Inner Cacheable property mapping for memory attributes 7, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR7_WRITE_BACK = (3 shl 14); Inner Cacheable property mapping for memory attributes 7, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR6_NONCACHED = (0 shl 12); Inner Cacheable property mapping for memory attributes 6, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR6_WRITE_ALLOCATE = (1 shl 12); Inner Cacheable property mapping for memory attributes 6, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR6_WRITE_THROUGH = (2 shl 12); Inner Cacheable property mapping for memory attributes 6, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR6_WRITE_BACK = (3 shl 12); Inner Cacheable property mapping for memory attributes 6, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR5_NONCACHED = (0 shl 10); Inner Cacheable property mapping for memory attributes 5, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR5_WRITE_ALLOCATE = (1 shl 10); Inner Cacheable property mapping for memory attributes 5, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR5_WRITE_THROUGH = (2 shl 10); Inner Cacheable property mapping for memory attributes 5, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR5_WRITE_BACK = (3 shl 10); Inner Cacheable property mapping for memory attributes 5, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR4_NONCACHED = (0 shl 8); Inner Cacheable property mapping for memory attributes 4, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR4_WRITE_ALLOCATE = (1 shl 8); Inner Cacheable property mapping for memory attributes 4, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR4_WRITE_THROUGH = (2 shl 8); Inner Cacheable property mapping for memory attributes 4, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR4_WRITE_BACK = (3 shl 8); Inner Cacheable property mapping for memory attributes 4, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR3_NONCACHED = (0 shl 6); Inner Cacheable property mapping for memory attributes 3, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR3_WRITE_ALLOCATE = (1 shl 6); Inner Cacheable property mapping for memory attributes 3, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR3_WRITE_THROUGH = (2 shl 6); Inner Cacheable property mapping for memory attributes 3, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR3_WRITE_BACK = (3 shl 6); Inner Cacheable property mapping for memory attributes 3, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR2_NONCACHED = (0 shl 4); Inner Cacheable property mapping for memory attributes 2, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR2_WRITE_ALLOCATE = (1 shl 4); Inner Cacheable property mapping for memory attributes 2, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR2_WRITE_THROUGH = (2 shl 4); Inner Cacheable property mapping for memory attributes 2, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR2_WRITE_BACK = (3 shl 4); Inner Cacheable property mapping for memory attributes 2, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR1_NONCACHED = (0 shl 2); Inner Cacheable property mapping for memory attributes 1, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR1_WRITE_ALLOCATE = (1 shl 2); Inner Cacheable property mapping for memory attributes 1, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR1_WRITE_THROUGH = (2 shl 2); Inner Cacheable property mapping for memory attributes 1, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR1_WRITE_BACK = (3 shl 2); Inner Cacheable property mapping for memory attributes 1, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR0_NONCACHED = (0 shl 0); Inner Cacheable property mapping for memory attributes 0, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR0_WRITE_ALLOCATE = (1 shl 0); Inner Cacheable property mapping for memory attributes 0, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR0_WRITE_THROUGH = (2 shl 0); Inner Cacheable property mapping for memory attributes 0, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
ARMV8_CP15_C10_NMRR_IR0_WRITE_BACK = (3 shl 0); Inner Cacheable property mapping for memory attributes 0, if the region is mapped as Normal memory by the PRRR (The value of the TEX[0], C and B bits).
 
ARMV8_CP15_C10_NMRR_MASK = ARMV8_CP15_C10_NMRR_IR1_NONCACHED or ARMV8_CP15_C10_NMRR_OR1_NONCACHED IR1 and OR1 are Non Cached
 
or ARMV8_CP15_C10_NMRR_IR2_WRITE_THROUGH or ARMV8_CP15_C10_NMRR_OR2_WRITE_THROUGH IR2 and OR2 are Write Through
 
or ARMV8_CP15_C10_NMRR_IR3_WRITE_BACK or ARMV8_CP15_C10_NMRR_OR3_WRITE_BACK IR3 and OR3 are Write Back
 
or ARMV8_CP15_C10_NMRR_IR7_WRITE_ALLOCATE or ARMV8_CP15_C10_NMRR_OR7_WRITE_ALLOCATE; IR7 and OR7 are Write Allocate


ARMv8 CP15 C14 generic timer control ARMV8_CP15_C14_CNT_CTL_*
ARMV8_CP15_C14_CNT_CTL_ISTATUS = (1 shl 2); The status of the timer (Read Only)(When set the timer condition is asserted)
ARMV8_CP15_C14_CNT_CTL_IMASK = (1 shl 1); Timer output signal mask bit (When set the timer output signal is masked)
ARMV8_CP15_C14_CNT_CTL_ENABLE = (1 shl 0); Enables the timer (When set the timer output signal is enabled)


ARMv8 CP15 C14 generic timer ARMV8_CP15_C14_*
ARMV8_CP15_C14_CNTP = 0; Physical Timer (Secure or Non Secure depending on the NS bit of the SCR)
ARMV8_CP15_C14_CNTV = 1; Virtual Timer
ARMV8_CP15_C14_CNTH = 2; Hypervisor Timer (Only available from HYP mode)


ARMv8 floating-point exception ARMV8_FPEXC_*
ARMV8_FPEXC_EN = (1 shl 30); Floating-point system is enabled and operates normally if set to 1 (Default 0)
ARMV8_FPEXC_EX = (1 shl 31); If EX is set to 0 then only FPSCR and FPEXC need to be preseved on a context switch (Default 0)


ARMv8 level one descriptor type ARMV8_L1D_TYPE_*
See page B3-7 of the ARMv7 Architecture Reference Manual
See page B3-8 of the ARMv7 Architecture Reference Manual
Level One Page Table contains 4096 32bit (4 byte) entries for a total size of 16KB
 
ARMV8_L1D_TYPE_COARSE = 1; The entry points to a 1MB second-level page table. See page 6-40.
ARMV8_L1D_TYPE_SECTION = 2; The entry points to a either a 1MB Section of memory or a 16MB Supersection of memory
ARMV8_L1D_TYPE_SUPERSECTION = 2; Bit[18] of the descriptor selects between a Section and a Supersection


ARMv8 level one descriptor flag ARMV8_L1D_FLAG_*
See page B3-9 of the ARMv7 Architecture Reference Manual
 
ARMV8_L1D_FLAG_COARSE_NS = (1 shl 3); NS (Non Secure) Attribute bit to enable the support of TrustZone
ARMV8_L1D_FLAG_SECTION_NS = (1 shl 19); NS (Non Secure) Attribute bit to enable the support of TrustZone
ARMV8_L1D_FLAG_SUPERSECTION = (1 shl 18); The descriptor is a 16MB Supersection instead of a 1MB Section (Section Only)
ARMV8_L1D_FLAG_NOT_GLOBAL = (1 shl 17); The Not-Global (nG) bit, determines if the translation is marked as global (0), or process-specific (1) (Section Only).
ARMV8_L1D_FLAG_SHARED = (1 shl 16); The Shared (S) bit, determines if the translation is for Non-Shared (0), or Shared (1) memory. This only applies to Normal memory regions.

Device memory can be Shared or Non-Shared as determined by the TEX bits and the C and B bits (Section Only).

ARMV8_L1D_FLAG_AP2 = (1 shl 15); The access permissions extension (AP2) bit, provides an extra access permission bit (Section Only).
ARMV8_L1D_FLAG_IMP = (1 shl 9); The meaning of this bit is IMPLEMENTATION DEFINED
ARMV8_L1D_FLAG_XN = (1 shl 4); The Execute-Never (XN) bit, determines if the region is Executable (0) or Not-executable(1) (Section Only).
ARMV8_L1D_FLAG_C = (1 shl 3); Cacheable (C) bit (Section Only)
ARMV8_L1D_FLAG_B = (1 shl 2); Bufferable (B) bit (Section Only)


ARMv8 level one descriptor mask ARMV8_L1D_*_MASK
See page B3-8 of the ARMv7 Architecture Reference Manual
 
ARMV8_L1D_COARSE_BASE_MASK = $FFFFFC00;  
ARMV8_L1D_SECTION_BASE_MASK = $FFF00000;  
ARMV8_L1D_SUPERSECTION_BASE_MASK = $FF000000;  
ARMV8_L1D_DOMAIN_MASK = ($F shl 5); Security Domain of the Descriptor
ARMV8_L1D_TEX_MASK = (7 shl 12); Type extension field bits (Section Only)
ARMV8_L1D_AP_MASK = (3 shl 10); Access permission bits (Section Only)


ARMv8 level one descriptor TEX value ARMV8_L1D_TEX*
See page B3-32 of the ARMv7 Architecture Reference Manual (Section Only)
 
ARMV8_L1D_TEX0 = (0 shl 12);  
ARMV8_L1D_TEX1 = (1 shl 12);  
ARMV8_L1D_TEX2 = (2 shl 12);  
ARMV8_L1D_TEX4 = (4 shl 12); Only used for Cacheable memory values
ARMV8_L1D_TEX5 = (5 shl 12); Only used for Cacheable memory values
ARMV8_L1D_TEX6 = (6 shl 12); Only used for Cacheable memory values
ARMV8_L1D_TEX7 = (7 shl 12); Only used for Cacheable memory values


ARMv8 level one descriptor AP value ARMV8_L1D_AP*
See page B3-28 of the ARMv7 Architecture Reference Manual (Section Only)
 
ARMV8_L1D_AP0 = (0 shl 10);  
ARMV8_L1D_AP1 = (1 shl 10);  
ARMV8_L1D_AP2 = (2 shl 10);  
ARMV8_L1D_AP3 = (3 shl 10);  


ARMv8 level one descriptor permission value ARMV8_L1D_ACCESS_*
See page B3-28 of the ARMv7 Architecture Reference Manual
This is not the full set of permissions as Ultibo always runs in priviledged mode
The XN bit can also be applied to control whether memory regions are executable or not
 
ARMV8_L1D_ACCESS_NONE = ARMV8_L1D_AP0; No Access for both Privileged and Unprivileged code
ARMV8_L1D_ACCESS_READONLY = ARMV8_L1D_FLAG_AP2 or ARMV8_L1D_AP3; Read-Only for both Privileged and Unprivileged code
ARMV8_L1D_ACCESS_READWRITE = ARMV8_L1D_AP3; Read-Write for both Privileged and Unprivileged code


ARMv8 level one descriptor cache value ARMV8_L1D_CACHE_*
See page B3-32 of the ARMv7 Architecture Reference Manual
 
ARMV8_L1D_CACHE_STRONGLY_ORDERED = ARMV8_L1D_TEX0; Strongly Ordered. (Always Shared)
ARMV8_L1D_CACHE_SHARED_DEVICE = ARMV8_L1D_TEX0 or ARMV8_L1D_FLAG_B; Device. (Always Shared)
ARMV8_L1D_CACHE_NORMAL_WRITE_THROUGH = ARMV8_L1D_TEX0 or ARMV8_L1D_FLAG_C; Normal. Write Through (Shared if S bit set)
ARMV8_L1D_CACHE_NORMAL_WRITE_BACK = ARMV8_L1D_TEX0 or ARMV8_L1D_FLAG_C or ARMV8_L1D_FLAG_B; Normal. Write Back (Shared if S bit set)
ARMV8_L1D_CACHE_NORMAL_NONCACHED = ARMV8_L1D_TEX1; Normal. Noncacheable (Shared if S bit set)
ARMV8_L1D_CACHE_NORMAL_WRITE_ALLOCATE = ARMV8_L1D_TEX1 or ARMV8_L1D_FLAG_C or ARMV8_L1D_FLAG_B; Normal. Write Allocate (Shared if S bit set)
ARMV8_L1D_CACHE_NONSHARED_DEVICE = ARMV8_L1D_TEX2; Device. (Not Shared


ARMv8 level one descriptor cacheable memory value ARMV8_L1D_CACHE_CACHEABLE_*
Cacheable Memory
 
ARMV8_L1D_CACHE_CACHEABLE_OUTER_NONCACHED = ARMV8_L1D_TEX4; Outer Normal Noncacheable (Shared if S bit set)
ARMV8_L1D_CACHE_CACHEABLE_OUTER_WRITE_ALLOCATE = ARMV8_L1D_TEX5; Outer Normal Write Allocate (Shared if S bit set)
ARMV8_L1D_CACHE_CACHEABLE_OUTER_WRITE_THROUGH = ARMV8_L1D_TEX6; Outer Normal Write Through (Shared if S bit set)
ARMV8_L1D_CACHE_CACHEABLE_OUTER_WRITE_BACK = ARMV8_L1D_TEX7; Outer Normal Write Back (Shared if S bit set)
 
ARMV8_L1D_CACHE_CACHEABLE_INNER_NONCACHED = ARMV8_L1D_TEX4; Inner Normal Noncacheable (Shared if S bit set)
ARMV8_L1D_CACHE_CACHEABLE_INNER_WRITE_ALLOCATE = ARMV8_L1D_TEX4 or ARMV8_L1D_FLAG_B; Inner Normal Write Allocate (Shared if S bit set)
ARMV8_L1D_CACHE_CACHEABLE_INNER_WRITE_THROUGH = ARMV8_L1D_TEX4 or ARMV8_L1D_FLAG_C; Inner Normal Write Through (Shared if S bit set)
ARMV8_L1D_CACHE_CACHEABLE_INNER_WRITE_BACK = ARMV8_L1D_TEX4 or ARMV8_L1D_FLAG_C or ARMV8_L1D_FLAG_B; Inner Normal Write Back (Shared if S bit set)


ARMv8 level one descriptor cache TEX remap value ARMV8_L1D_CACHE_REMAP_*
TEX Remap Enabled
See page B3-34 of the ARMv7 Architecture Reference Manual (These values are from Linux)
 
ARMV8_L1D_CACHE_REMAP_STRONGLY_ORDERED = ARMV8_L1D_TEX0; TR0 - Strongly Ordered
ARMV8_L1D_CACHE_REMAP_NORMAL_NONCACHED = ARMV8_L1D_TEX0 or ARMV8_L1D_FLAG_B; TR1 - Normal Noncacheable (Inner Shared if S bit set)
ARMV8_L1D_CACHE_REMAP_NORMAL_WRITE_THROUGH = ARMV8_L1D_TEX0 or ARMV8_L1D_FLAG_C; TR2 - Normal Write Through (Inner Shared if S bit set)
ARMV8_L1D_CACHE_REMAP_NORMAL_WRITE_BACK = ARMV8_L1D_TEX0 or ARMV8_L1D_FLAG_C or ARMV8_L1D_FLAG_B; TR3 - Normal Write Back (Inner Shared if S bit set)
ARMV8_L1D_CACHE_REMAP_DEVICE = ARMV8_L1D_TEX1; TR4 - Device
ARMV8_L1D_CACHE_REMAP_UNUSED = ARMV8_L1D_TEX1 or ARMV8_L1D_FLAG_B; TR5 - Not currently used
ARMV8_L1D_CACHE_REMAP_RESERVED = ARMV8_L1D_TEX1 or ARMV8_L1D_FLAG_C; TR6 - Implementation Defined
ARMV8_L1D_CACHE_REMAP_NORMAL_WRITE_ALLOCATE = ARMV8_L1D_TEX1 or ARMV8_L1D_FLAG_C or ARMV8_L1D_FLAG_B; TR7 - Normal Write Allocate (Inner Shared if S bit set)


ARMv8 level two descriptor type ARMV8_L2D_TYPE_*
See page B3-10 of the ARMv7 Architecture Reference Manual
Level Two Page Table contains 256 32bit (4 byte) entries for a total size of 1KB
 
ARMV8_L2D_TYPE_LARGE = 1; The entry points to a 64KB Large page in memory
ARMV8_L2D_TYPE_SMALL = 2; The entry points to a 4KB Extended small page in memory. Bit[0] of the entry is the XN (Execute Never) bit for the entry.


ARMv8 level two descriptor flag ARMV8_L2D_FLAG_*
See page B3-10 of the ARMv7 Architecture Reference Manual
 
ARMV8_L2D_FLAG_LARGE_XN = (1 shl 15); The Execute-Never (XN) bit, determines if the region is Executable (0) or Not-executable(1).
ARMV8_L2D_FLAG_SMALL_XN = (1 shl 0); The Execute-Never (XN) bit, determines if the region is Executable (0) or Not-executable(1).
ARMV8_L2D_FLAG_NOT_GLOBAL = (1 shl 11); The Not-Global (nG) bit, determines if the translation is marked as global (0), or process-specific (1).
ARMV8_L2D_FLAG_SHARED = (1 shl 10); The Shared (S) bit, determines if the translation is for Non-Shared (0), or Shared (1) memory. This only applies to Normal memory regions.

Device memory can be Shared or Non-Shared as determined by the TEX bits and the C and B bits.

ARMV8_L2D_FLAG_AP2 = (1 shl 9);. The access permissions extension (APX) bit, provides an extra access permission bit
ARMV8_L2D_FLAG_C = (1 shl 3); Cacheable (C) bit
ARMV8_L2D_FLAG_B = (1 shl 2); Bufferable (B) bit


ARMv8 level two descriptor mask ARMV8_L2D_*_MASK
See page B3-10 of the ARMv7 Architecture Reference Manual
 
ARMV8_L2D_LARGE_BASE_MASK = $FFFF0000;  
ARMV8_L2D_SMALL_BASE_MASK = $FFFFF000;  
ARMV8_L2D_LARGE_TEX_MASK = (7 shl 12); Type extension field bits
ARMV8_L2D_SMALL_TEX_MASK = (7 shl 6); Type extension field bits
ARMV8_L2D_AP_MASK = (3 shl 4); Access permission bits


ARMv8 level two descriptor large TEX value ARMV8_L2D_LARGE_TEX*
See page B3-32 of the ARMv7 Architecture Reference Manual
 
ARMV8_L2D_LARGE_TEX0 = (0 shl 12);  
ARMV8_L2D_LARGE_TEX1 = (1 shl 12);  
ARMV8_L2D_LARGE_TEX2 = (2 shl 12);  
ARMV8_L2D_LARGE_TEX4 = (4 shl 12);  
ARMV8_L2D_LARGE_TEX5 = (5 shl 12); Only used for Cacheable memory values
ARMV8_L2D_LARGE_TEX6 = (6 shl 12); Only used for Cacheable memory values
ARMV8_L2D_LARGE_TEX7 = (7 shl 12); Only used for Cacheable memory values


ARMv8 level two descriptor small TEX value ARMV8_L2D_SMALL_TEX*
See page B3-32 of the ARMv7 Architecture Reference Manual
 
ARMV8_L2D_SMALL_TEX0 = (0 shl 6);  
ARMV8_L2D_SMALL_TEX1 = (1 shl 6);  
ARMV8_L2D_SMALL_TEX2 = (2 shl 6);  
ARMV8_L2D_SMALL_TEX4 = (4 shl 6);  
ARMV8_L2D_SMALL_TEX5 = (5 shl 6); Only used for Cacheable memory values
ARMV8_L2D_SMALL_TEX6 = (6 shl 6); Only used for Cacheable memory values
ARMV8_L2D_SMALL_TEX7 = (7 shl 6); Only used for Cacheable memory values


ARMv8 level two descriptor AP value ARMV8_L2D_AP*
See page B3-28 of the ARMv7 Architecture Reference Manual
 
ARMV8_L2D_AP0 = (0 shl 4);  
ARMV8_L2D_AP1 = (1 shl 4);  
ARMV8_L2D_AP2 = (2 shl 4);  
ARMV8_L2D_AP3 = (3 shl 4);  


ARMv8 level two descriptor permission value ARMV8_L2D_ACCESS_*
See page B3-28 of the ARMv7 Architecture Reference Manual
This is not the full set of permissions as Ultibo always runs in priviledged mode
The XN bit can also be applied to control whether memory regions are executable or not
 
ARMV8_L2D_ACCESS_NONE = ARMV8_L2D_AP0; No Access for both Privileged and Unprivileged code
ARMV8_L2D_ACCESS_READONLY = ARMV8_L2D_FLAG_AP2 or ARMV8_L2D_AP3; Read-Only for both Privileged and Unprivileged code
ARMV8_L2D_ACCESS_READWRITE = ARMV8_L2D_AP3; Read-Write for both Privileged and Unprivileged code


ARMv8 level two descriptor large cache value ARMV8_L2D_LARGE_CACHE_*
See page B3-32 of the ARMv7 Architecture Reference Manual
 
ARMV8_L2D_LARGE_CACHE_STRONGLY_ORDERED = ARMV8_L2D_LARGE_TEX0; Strongly Ordered. (Always Shared)
ARMV8_L2D_LARGE_CACHE_SHARED_DEVICE = ARMV8_L2D_LARGE_TEX0 or ARMV8_L2D_FLAG_B; Device. (Always Shared)
ARMV8_L2D_LARGE_CACHE_NORMAL_WRITE_THROUGH = ARMV8_L2D_LARGE_TEX0 or ARMV8_L2D_FLAG_C; Normal. Write Through (Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_NORMAL_WRITE_BACK = ARMV8_L2D_LARGE_TEX0 or ARMV8_L2D_FLAG_C or ARMV8_L2D_FLAG_B; Normal. Write Back (Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_NORMAL_NONCACHED = ARMV8_L2D_LARGE_TEX1; Normal. Noncacheable (Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_NORMAL_WRITE_ALLOCATE = ARMV8_L2D_LARGE_TEX1 or ARMV8_L2D_FLAG_C or ARMV8_L2D_FLAG_B; Normal. Write Allocate (Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_NONSHARED_DEVICE = ARMV8_L2D_LARGE_TEX2; Device. (Not Shared)


ARMv8 level two descriptor large cacheable memory value ARMV8_L2D_LARGE_CACHE_CACHEABLE_*
Cacheable Memory
See page B3-32 of the ARMv7 Architecture Reference Manual
 
ARMV8_L2D_LARGE_CACHE_CACHEABLE_OUTER_NONCACHED = ARMV8_L2D_LARGE_TEX4; Outer Normal Noncacheable (Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_CACHEABLE_OUTER_WRITE_ALLOCATE = ARMV8_L2D_LARGE_TEX5; Outer Normal Write Allocate (Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_CACHEABLE_OUTER_WRITE_THROUGH = ARMV8_L2D_LARGE_TEX6; Outer Normal Write Through (Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_CACHEABLE_OUTER_WRITE_BACK = ARMV8_L2D_LARGE_TEX7; Outer Normal Write Back (Shared if S bit set)
 
ARMV8_L2D_LARGE_CACHE_CACHEABLE_INNER_NONCACHED = ARMV8_L2D_LARGE_TEX4; Inner Normal Noncacheable (Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_CACHEABLE_INNER_WRITE_ALLOCATE = ARMV8_L2D_LARGE_TEX4 or ARMV8_L2D_FLAG_B; Inner Normal Write Allocate (Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_CACHEABLE_INNER_WRITE_THROUGH = ARMV8_L2D_LARGE_TEX4 or ARMV8_L2D_FLAG_C; Inner Normal Write Through (Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_CACHEABLE_INNER_WRITE_BACK = ARMV8_L2D_LARGE_TEX4 or ARMV8_L2D_FLAG_C or ARMV8_L2D_FLAG_B; Inner Normal Write Back (Shared if S bit set)


ARMv8 level two descriptor large cache TEX remap value ARMV8_L2D_LARGE_CACHE_REMAP_*
TEX Remap Enabled
See page B3-32 of the ARMv7 Architecture Reference Manual (These values are from Linux)
 
ARMV8_L2D_LARGE_CACHE_REMAP_STRONGLY_ORDERED = ARMV8_L2D_LARGE_TEX0; TR0 - Strongly Ordered
ARMV8_L2D_LARGE_CACHE_REMAP_NORMAL_NONCACHED = ARMV8_L2D_LARGE_TEX0 or ARMV8_L2D_FLAG_B; TR1 - Normal Noncacheable (Inner Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_REMAP_NORMAL_WRITE_THROUGH = ARMV8_L2D_LARGE_TEX0 or ARMV8_L2D_FLAG_C; TR2 - Normal Write Through (Inner Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_REMAP_NORMAL_WRITE_BACK = ARMV8_L2D_LARGE_TEX0 or ARMV8_L2D_FLAG_C or ARMV8_L2D_FLAG_B; TR3 - Normal Write Back (Inner Shared if S bit set)
ARMV8_L2D_LARGE_CACHE_REMAP_DEVICE = ARMV8_L2D_LARGE_TEX1; TR4 - Device
ARMV8_L2D_LARGE_CACHE_REMAP_UNUSED = ARMV8_L2D_LARGE_TEX1 or ARMV8_L2D_FLAG_B; TR5 - Not currently used
ARMV8_L2D_LARGE_CACHE_REMAP_RESERVED = ARMV8_L2D_LARGE_TEX1 or ARMV8_L2D_FLAG_C; TR6 - Implementation Defined
ARMV8_L2D_LARGE_CACHE_REMAP_NORMAL_WRITE_ALLOCATE = ARMV8_L2D_LARGE_TEX1 or ARMV8_L2D_FLAG_C or ARMV8_L2D_FLAG_B; TR7 - Normal Write Allocate (Inner Shared if S bit set)


ARMv8 level two descriptor small cache value ARMV8_L2D_SMALL_CACHE_*
See page B3-32 of the ARMv7 Architecture Reference Manual
 
ARMV8_L2D_SMALL_CACHE_STRONGLY_ORDERED = ARMV8_L2D_SMALL_TEX0; Strongly Ordered. (Always Shared)
ARMV8_L2D_SMALL_CACHE_SHARED_DEVICE = ARMV8_L2D_SMALL_TEX0 or ARMV8_L2D_FLAG_B; Device. (Always Shared)
ARMV8_L2D_SMALL_CACHE_NORMAL_WRITE_THROUGH = ARMV8_L2D_SMALL_TEX0 or ARMV8_L2D_FLAG_C; Normal. Write Through (Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_NORMAL_WRITE_BACK = ARMV8_L2D_SMALL_TEX0 or ARMV8_L2D_FLAG_C or ARMV8_L2D_FLAG_B; Normal. Write Back (Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_NORMAL_NONCACHED = ARMV8_L2D_SMALL_TEX1; Normal. Noncacheable (Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_NORMAL_WRITE_ALLOCATE = ARMV8_L2D_SMALL_TEX1 or ARMV8_L2D_FLAG_C or ARMV8_L2D_FLAG_B; Normal. Write Allocate (Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_NONSHARED_DEVICE = ARMV8_L2D_SMALL_TEX2; Device. (Not Shared)


ARMv8 level two descriptor small cacheable memory value ARMV8_L2D_SMALL_CACHE_CACHEABLE_*
Cacheable Memory
See page B3-32 of the ARMv7 Architecture Reference Manual
 
ARMV8_L2D_SMALL_CACHE_CACHEABLE_OUTER_NONCACHED = ARMV8_L2D_SMALL_TEX4; Outer Normal Noncacheable (Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_CACHEABLE_OUTER_WRITE_ALLOCATE = ARMV8_L2D_SMALL_TEX5; Outer Normal Write Allocate (Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_CACHEABLE_OUTER_WRITE_THROUGH = ARMV8_L2D_SMALL_TEX6; Outer Normal Write Through (Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_CACHEABLE_OUTER_WRITE_BACK = ARMV8_L2D_SMALL_TEX7; Outer Normal Write Back (Shared if S bit set)
 
ARMV8_L2D_SMALL_CACHE_CACHEABLE_INNER_NONCACHED = ARMV8_L2D_SMALL_TEX4; Inner Normal Noncacheable (Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_CACHEABLE_INNER_WRITE_ALLOCATE = ARMV8_L2D_SMALL_TEX4 or ARMV8_L2D_FLAG_B; Inner Normal Write Allocate (Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_CACHEABLE_INNER_WRITE_THROUGH = ARMV8_L2D_SMALL_TEX4 or ARMV8_L2D_FLAG_C; Inner Normal Write Through (Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_CACHEABLE_INNER_WRITE_BACK = ARMV8_L2D_SMALL_TEX4 or ARMV8_L2D_FLAG_C or ARMV8_L2D_FLAG_B; Inner Normal Write Back (Shared if S bit set)


ARMv8 level two descriptor small cache TEX remap value ARMV8_L2D_SMALL_CACHE_REMAP_*
TEX Remap Enabled
See page B3-32 of the ARMv7 Architecture Reference Manual (These values are from Linux)
 
ARMV8_L2D_SMALL_CACHE_REMAP_STRONGLY_ORDERED = ARMV8_L2D_SMALL_TEX0; TR0 - Strongly Ordered
ARMV8_L2D_SMALL_CACHE_REMAP_NORMAL_NONCACHED = ARMV8_L2D_SMALL_TEX0 or ARMV8_L2D_FLAG_B; TR1 - Normal Noncacheable (Inner Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_REMAP_NORMAL_WRITE_THROUGH = ARMV8_L2D_SMALL_TEX0 or ARMV8_L2D_FLAG_C; TR2 - Normal Write Through (Inner Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_REMAP_NORMAL_WRITE_BACK = ARMV8_L2D_SMALL_TEX0 or ARMV8_L2D_FLAG_C or ARMV8_L2D_FLAG_B; TR3 - Normal Write Back (Inner Shared if S bit set)
ARMV8_L2D_SMALL_CACHE_REMAP_DEVICE = ARMV8_L2D_SMALL_TEX1; TR4 - Device
ARMV8_L2D_SMALL_CACHE_REMAP_UNUSED = ARMV8_L2D_SMALL_TEX1 or ARMV8_L2D_FLAG_B; TR5 - Not currently used
ARMV8_L2D_SMALL_CACHE_REMAP_RESERVED = ARMV8_L2D_SMALL_TEX1 or ARMV8_L2D_FLAG_C; TR6 - Implementation Defined
ARMV8_L2D_SMALL_CACHE_REMAP_NORMAL_WRITE_ALLOCATE = ARMV8_L2D_SMALL_TEX1 or ARMV8_L2D_FLAG_C or ARMV8_L2D_FLAG_B; TR7 - Normal Write Allocate (Inner Shared if S bit set)


ARMv8 specific constants ARMV8_*
ARMV8_CONTEXT_LENGTH = 50; Length of ARM context switch record in 32 bit words (includes fpexc, fpscr, d0-d15, r0-r12, lr, pc, cpsr)


Type definitions



ARMv8 page table initialization

TARMv8PageTableInit = procedure;

ARMv8 dispatch IRQ

TARMv8DispatchIRQ = function(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

ARMv8 dispatch FIQ

TARMv8DispatchFIQ = function(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

ARMv8 dispatch SWI

TARMv8DispatchSWI = function(CPUID:LongWord; Thread:TThreadHandle; Request:PSystemCallRequest):TThreadHandle;


Public variables



ARMv8 specific variables

ARMv8Initialized:Boolean;

Page table handlers

ARMv8PageTableInitHandler:TARMv8PageTableInit;

IRQ handlers

ARMv8DispatchIRQHandler:TARMv8DispatchIRQ;

FIQ handlers

ARMv8DispatchFIQHandler:TARMv8DispatchFIQ;

SWI handlers

ARMv8DispatchSWIHandler:TARMv8DispatchSWI;


Function declarations



Initialization functions

procedure ARMv8Init;
Description: To be documented
Note None documented


ARMv8 platform functions

procedure ARMv8CPUInit; assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMv8FPUInit; assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMv8MMUInit;
Description: To be documented
Note None documented


procedure ARMv8CacheInit; assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMv8TimerInit(Frequency:LongWord); assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMv8PageTableInit;
Description: Initialize the Hardware Page Tables before enabling the MMU
Note None documented


procedure ARMv8SystemCall(Number:LongWord; Param1,Param2,Param3:PtrUInt); assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8CPUGetMode:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8CPUGetState:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8CPUGetCurrent:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8CPUGetMainID:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8CPUGetMultiprocessorID:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8CPUGetModel:LongWord;
Description: To be documented
Note None documented


function ARMv8CPUGetRevision:LongWord;
Description: To be documented
Note None documented


function ARMv8CPUGetDescription:String;
Description: To be documented
Note None documented


function ARMv8FPUGetState:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8L1CacheGetType:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8L1DataCacheGetSize:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8L1DataCacheGetLineSize:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8L1InstructionCacheGetSize:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8L1InstructionCacheGetLineSize:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8L2CacheGetType:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8L2CacheGetSize:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8L2CacheGetLineSize:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMv8Halt; assembler; nostackframe; public name '_haltproc';
Description: The purpose of the Wait For Interrupt operation is to put the processor in to a low power state
Note See Standby mode on page A8-810 of the ARMv7 Architecture Reference Manual


procedure ARMv8Pause; assembler; nostackframe;
Description: The purpose of the Wait For Interrupt operation is to put the processor in to a low power state
Note See Standby mode on page A8-810 of the ARMv7 Architecture Reference Manual


procedure ARMv8SendEvent; assembler; nostackframe;
Description: To be documented
Note See Page A8-316 of the ARMv7 Architecture Reference Manual


procedure ARMv8WaitForEvent; assembler; nostackframe;
Description: To be documented
Note See Page A8-808 of the ARMv7 Architecture Reference Manual


procedure ARMv8WaitForInterrupt; assembler; nostackframe;
Description: The purpose of the Wait For Interrupt operation is to put the processor in to a low power state
Note See Standby mode on page A8-810 of the ARMv7 Architecture Reference Manual


procedure ARMv8DataMemoryBarrier; assembler; nostackframe;
Description: Perform a data memory barrier operation using the c7 (Cache Operations) register of system control coprocessor CP15
Note See page A8-90 of the ARMv7 Architecture Reference Manual

Note that this is also available in the FPC RTL as ReadBarrier/WriteBarrier See: \source\rtl\arm\arm.inc
Implementation is exactly the same for either


procedure ARMv8DataSynchronizationBarrier; assembler; nostackframe;
Description: Perform a data synchronization barrier operation
Note See page A8-92 of the ARMv7 Architecture Reference Manual


procedure ARMv8InstructionMemoryBarrier; assembler; nostackframe;
Description: Perform a instruction synchronization barrier operation
Note See page A8-102 of the ARMv7 Architecture Reference Manual


procedure ARMv8InvalidateTLB; assembler; nostackframe;
Description: Perform an invalidate entire TLB operation using the c8 (TLB Operations) register of system control coprocessor CP15
Note See page B3-138 of the ARMv7 Architecture Reference Manual


procedure ARMv8InvalidateDataTLB; assembler; nostackframe;
Description: Perform an invalidate data TLB (Unlocked/Data) operation using the c8 (TLB Operations) register of system control coprocessor CP15
Note See page B3-138 of the ARMv7 Architecture Reference Manual


procedure ARMv8InvalidateInstructionTLB; assembler; nostackframe;
Description: Perform an invalidate instruction TLB (Unlocked/Instruction) operation using the c8 (TLB Operations) register of system control coprocessor CP15
Note See page B3-138 of the ARMv7 Architecture Reference Manual


procedure ARMv8InvalidateCache; assembler; nostackframe;
Description: Perform an invalidate both caches operation using the c7 (Cache Operations) register of system control coprocessor CP15
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8CleanDataCache; assembler; nostackframe;
Description: Perform a clean entire data cache operation
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8InvalidateDataCache; assembler; nostackframe;
Description: Perform an invalidate entire data cache operation
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8InvalidateL1DataCache; assembler; nostackframe;
Description: Perform an invalidate entire L1 data cache operation
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8CleanAndInvalidateDataCache; assembler; nostackframe;
Description: Perform a clean and invalidate entire data cache operation
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8InvalidateInstructionCache; assembler; nostackframe;
Description: Perform an invalidate entire instruction cache operation using the c7 (Cache Operations) register of system control coprocessor CP15
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8InvalidateDataCacheRange(Address:PtrUInt; Size:LongWord);
Description: Perform an invalidate data cache by MVA to PoC operation
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8CleanAndInvalidateDataCacheRange(Address:PtrUInt; Size:LongWord);
Description: Perform a clean and invalidate data cache by MVA to PoC operation
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8InvalidateInstructionCacheRange(Address:PtrUInt; Size:LongWord);
Description: Perform an invalidate instruction caches by MVA to PoU operation
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8CleanDataCacheSetWay(SetWay:LongWord); assembler; nostackframe;
Description: Perform a clean data cache line by set/way operation
SetWay Set/Way/Level will be passed in r0
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8InvalidateDataCacheSetWay(SetWay:LongWord); assembler; nostackframe;
Description: Perform an invalidate data cache line by set/way operation
SetWay Set/Way/Level will be passed in r0
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8CleanAndInvalidateDataCacheSetWay(SetWay:LongWord); assembler; nostackframe;
Description: Perform a clean and invalidate data cache line by set/way operation
SetWay Set/Way/Level will be passed in r0
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8FlushPrefetchBuffer; assembler; nostackframe;
Description: Perform an Instruction Synchronization Barrier operation
Note See page A8-102 of the ARMv7 Architecture Reference Manual


procedure ARMv8FlushBranchTargetCache; assembler; nostackframe;
Description: Perform a Flush Entire Branch Target Cache operation
Note See page B3-127 of the ARMv7 Architecture Reference Manual


procedure ARMv8ContextSwitch(OldStack,NewStack:Pointer; NewThread:TThreadHandle); assembler; nostackframe;
Description: Perform a context switch from one thread to another as a result of a thread yielding, sleeping or waiting
OldStack The address to save the stack pointer to for the current thread (Passed in r0)
NewStack The address to restore the stack pointer from for the new thread (Passed in r1)
NewThread The handle of the new thread to switch to (Passed in r2)
Note At the point of the actual context switch (str sp/ldr sp) the thread stacks will look like this:


(See: ARMv8ThreadSetupStack for additional information)

(Base "Highest Address" of Stack)
.
.
.
.
cpsr <- The current program status register value to load on return from the context switch
lr/pc <- The address to return to from the context switch
lr <- The lr value prior to the context switch
r12 <-
r11 <-
r10 <-
r9 <-
r8 <-
r7 <-
r6 <- The value of these registers prior to the context switch
r5 <-
r4 <-
r3 <-
r2 <-
r1 <-
r0 <-

d15 <-
d14 <-
d13 <-
d12 <-
d11 <-
d10 <-
d9 <-
d8 <- The value of these floating point registers prior to the context switch
d7 <-
d6 <-
d5 <-
d4 <-
d3 <-
d2 <-
d1 <-
d0 <-

fpscr <- The floating point FPSCR register
fpexc <- The floating point FPEXC register (Current StackPointer points to here)
.
.
.
.
(Top "Lowest Address" of Stack)

This form of context switch uses r12 to save the cpsr value (and RFE to restore it). Because this context switch is called from a routine which will have saved the value of r12 (which is caller save in the ARM ABI) then we do not need to save the original value of r12.

The context switch will be performed from SYS mode to SYS mode, the cpsr value will include the control bits (Mode and IRQ/FIQ state) but not the flags values. Again the ARM ABI does not require that the flags be saved by the callee and so the caller would have accounted for any needed flags before calling. If the thread to be resumed was interrupted by an IRQ or FIQ then the cpsr will also contain the flags etc as they were at the point of interrupt. We do not need to account for the state bits in the cpsr since all operations are performed in ARM mode at present.

The main requirement of this routine is to ensure that the context record on the stack matches exactly that which is created on an interrupt and also that created by ThreadSetupStack for a new thread. If this is correct then the next context switch for any given thread can be either by a call to reschedule or by an interrupt. Equally a new thread can be first run from a context switch that resulted from either a call to reschedule or an interrupt.

Note that this routine could use:

pop (lr)
pop (r12)
msr cpsr_c, r12
mov pc, lr

To return but that would mess up the value of r12, lr and the cpsr flags etc if the thread being resumed was interrupted by an IRQ,FIQ or SWI. The use of RFE here allows for exactly the same behaviour no matter which way the context record is saved and restored.


procedure ARMv8ContextSwitchIRQ(OldStack,NewStack:Pointer; NewThread:TThreadHandle); assembler; nostackframe;
Description: Perform a context switch from one thread to another as a result of an interrupt request (IRQ)
OldStack The address to save the stack pointer to for the current thread (Passed in r0)
NewStack The address to restore the stack pointer from for the new thread (Passed in r1)
NewThread The handle of the new thread to switch to (Passed in r2)
Note At the point of the actual context switch (str sp/ldr sp) the thread stacks will look like this:


(See: ARMv8ThreadSetupStack for additional information)

(Base "Highest Address" of Stack)
.
.
.
.
cpsr <- The current program status register value to load on return from the context switch
lr/pc <- The address to return to from the context switch
lr <- The lr value prior to the context switch
r12 <-
r11 <-
r10 <-
r9 <-
r8 <-
r7 <-
r6 <- The value of these registers prior to the context switch
r5 <-
r4 <-
r3 <-
r2 <-
r1 <-
r0 <-

d15 <-
d14 <-
d13 <-
d12 <-
d11 <-
d10 <-
d9 <-
d8 <- The value of these floating point registers prior to the context switch
d7 <-
d6 <-
d5 <-
d4 <-
d3 <-
d2 <-
d1 <-
d0 <-

fpscr <- The floating point FPSCR register
fpexc <- The floating point FPEXC register (Current StackPointer points to here)
.
.
.
.
(Top "Lowest Address" of Stack)

This form of context switch relies on the IRQ handler to save the necessary registers including the lr, cpsr and other general registers from the point at which the thread was interrupted. The thread to be resumed may have been saved by a previous IRQ or by a call to the standard context switch from SchedulerReschule or it may be a new thread to be run for the first time. All of these result in the same context record on the stack and therefore can be resumed the same way.

The context switch will be performed by switching to SYS mode, exchanging the stack pointers and then returning to IRQ mode.


procedure ARMv8ContextSwitchFIQ(OldStack,NewStack:Pointer; NewThread:TThreadHandle); assembler; nostackframe;
Description: Perform a context switch from one thread to another as a result of a fast interrupt request (FIQ)
OldStack The address to save the stack pointer to for the current thread (Passed in r0)
NewStack The address to restore the stack pointer from for the new thread (Passed in r1)
NewThread The handle of the new thread to switch to (Passed in r2)
Note At the point of the actual context switch (str sp/ldr sp) the thread stacks will look like this:


(See: ARMv8ThreadSetupStack for additional information)

(Base "Highest Address" of Stack)
.
.
.
.
cpsr <- The current program status register value to load on return from the context switch
lr/pc <- The address to return to from the context switch
lr <- The lr value prior to the context switch
r12 <-
r11 <-
r10 <-
r9 <-
r8 <-
r7 <-
r6 <- The value of these registers prior to the context switch
r5 <-
r4 <-
r3 <-
r2 <-
r1 <-
r0 <-

d15 <-
d14 <-
d13 <-
d12 <-
d11 <-
d10 <-
d9 <-
d8 <- The value of these floating point registers prior to the context switch
d7 <-
d6 <-
d5 <-
d4 <-
d3 <-
d2 <-
d1 <-
d0 <-

fpscr <- The floating point FPSCR register
fpexc <- The floating point FPEXC register (Current StackPointer points to here)
.
.
.
.
(Top "Lowest Address" of Stack)

This form of context switch relies on the FIQ handler to save the necessary registers including the lr, cpsr and other general registers from the point at which the thread was interrupted. The thread to be resumed may have been saved by a previous FIQ or by a call to the standard context switch from SchedulerReschule or it may be a new thread to be run for the first time. All of these result in the same context record on the stack and therefore can be resumed the same way.

The context switch will be performed by switching to SYS mode, exchanging the stack pointers and then returning to FIQ mode.


procedure ARMv8ContextSwitchSWI(OldStack,NewStack:Pointer; NewThread:TThreadHandle); assembler; nostackframe;
Description: Perform a context switch from one thread to another as a result of a software interrupt (SWI)
OldStack The address to save the stack pointer to for the current thread (Passed in r0)
NewStack The address to restore the stack pointer from for the new thread (Passed in r1)
NewThread The handle of the new thread to switch to (Passed in r2)
Note At the point of the actual context switch (str sp/ldr sp) the thread stacks will look like this:


(See: ARMv8ThreadSetupStack for additional information)

(Base "Highest Address" of Stack)
.
.
.
.
cpsr <- The current program status register value to load on return from the context switch
lr/pc <- The address to return to from the context switch
lr <- The lr value prior to the context switch
r12 <-
r11 <-
r10 <-
r9 <-
r8 <-
r7 <-
r6 <- The value of these registers prior to the context switch
r5 <-
r4 <-
r3 <-
r2 <-
r1 <-
r0 <-

d15 <-
d14 <-
d13 <-
d12 <-
d11 <-
d10 <-
d9 <-
d8 <- The value of these floating point registers prior to the context switch
d7 <-
d6 <-
d5 <-
d4 <-
d3 <-
d2 <-
d1 <-
d0 <-

fpscr <- The floating point FPSCR register
fpexc <- The floating point FPEXC register (Current StackPointer points to here)
.
.
.
.
(Top "Lowest Address" of Stack)

This form of context switch relies on the SWI handler to save the necessary registers including the lr, cpsr and other general registers from the point at which the thread was interrupted. The thread to be resumed may have been saved by a previous SWI or by a call to the standard context switch from SchedulerReschule or it may be a new thread to be run for the first time. All of these result in the same context record on the stack and therefore can be resumed the same way.

The context switch will be performed by switching to SYS mode, exchanging the stack pointers and then returning to SWI (SVC) mode.


function ARMv8InterlockedOr(var Target:LongInt; Value:LongInt):LongInt; assembler; nostackframe;
Description: Perform an atomic OR operation using LDREX/STREX
Note See page ???


function ARMv8InterlockedXor(var Target:LongInt; Value:LongInt):LongInt; assembler; nostackframe;
Description: Perform an atomic XOR operation using LDREX/STREX
Note See page ???


function ARMv8InterlockedAnd(var Target:LongInt; Value:LongInt):LongInt; assembler; nostackframe;
Description: Perform an atomic AND operation using LDREX/STREX
Note See page ???


function ARMv8InterlockedDecrement(var Target:LongInt):LongInt; assembler; nostackframe;
Description: Perform an atomic decrement operation using LDREX/STREX
Note See page ???


function ARMv8InterlockedIncrement(var Target:LongInt):LongInt; assembler; nostackframe;
Description: Perform an atomic increment operation using LDREX/STREX
Note See page ???


function ARMv8InterlockedExchange(var Target:LongInt; Source:LongInt):LongInt; assembler; nostackframe;
Description: Perform an atomic exchange operation using LDREX/STREX
Note See page ???


function ARMv8InterlockedAddExchange(var Target:LongInt; Source:LongInt):LongInt; assembler; nostackframe;
Description: Perform an atomic add and exchange operation using LDREX/STREX
Note See page ???


function ARMv8InterlockedCompareExchange(var Target:LongInt; Source,Compare:LongInt):LongInt; assembler; nostackframe;
Description: Perform an atomic compare and exchange operation using LDREX/STREX
Note See page ???


procedure ARMv8PageTableGetEntry(Address:PtrUInt; var Entry:TPageTableEntry);
Description: Get and Decode the entry in the Page Table that corresponds to the supplied virtual address
Note None documented


function ARMv8PageTableSetEntry(const Entry:TPageTableEntry):LongWord;
Description: Encode and Set an entry in the Page Table that corresponds to the supplied virtual address
Note None documented


function ARMv8VectorTableGetEntry(Number:LongWord):PtrUInt;
Description: Return the address of the specified vector table entry number
Note None documented


function ARMv8VectorTableSetEntry(Number:LongWord; Address:PtrUInt):LongWord;
Description: Set the supplied address as the value of the specified vector table entry number
Note None documented


function ARMv8FirstBitSet(Value:LongWord):LongWord; assembler; nostackframe;
Description: To be documented
Note ARM arm states that CLZ is supported for ARMv5 and above


function ARMv8CountLeadingZeros(Value:LongWord):LongWord; assembler; nostackframe;
Description: Equivalent of the GCC Builtin function __builtin_clz
Note ARM arm states that CLZ is supported for ARMv5 and above


ARMv8 thread functions

procedure ARMv8PrimaryInit; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8SpinLock(Spin:PSpinEntry):LongWord; assembler; nostackframe;
Description: Lock an existing Spin entry
Spin Pointer to the Spin entry to lock (Passed in R0)
Return ERROR_SUCCESS if completed or another error code on failure (Returned in R0)


function ARMv8SpinUnlock(Spin:PSpinEntry):LongWord; assembler; nostackframe;
Description: Unlock an existing Spin entry
Spin Pointer to the Spin entry to lock (Passed in R0)
Return ERROR_SUCCESS if completed or another error code on failure (Returned in R0)


function ARMv8SpinLockIRQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;
Description: Lock an existing Spin entry, disable IRQ and save the previous IRQ state
Spin Pointer to the Spin entry to lock (Passed in R0)
Return ERROR_SUCCESS if completed or another error code on failure (Returned in R0)


function ARMv8SpinUnlockIRQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;
Description: Unlock an existing Spin entry and restore the previous IRQ state
Spin Pointer to the Spin entry to lock (Passed in R0)
Return ERROR_SUCCESS if completed or another error code on failure (Returned in R0)


function ARMv8SpinLockFIQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;
Description: Lock an existing Spin entry, disable FIQ and save the previous FIQ state
Spin Pointer to the Spin entry to lock (Passed in R0)
Return ERROR_SUCCESS if completed or another error code on failure (Returned in R0)


function ARMv8SpinUnlockFIQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;
Description: Unlock an existing Spin entry and restore the previous FIQ state
Spin Pointer to the Spin entry to lock (Passed in R0)
Return ERROR_SUCCESS if completed or another error code on failure (Returned in R0)


function ARMv8SpinLockIRQFIQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;
Description: Lock an existing Spin entry, disable IRQ and FIQ and save the previous IRQ/FIQ state
Spin Pointer to the Spin entry to lock (Passed in R0)
Return ERROR_SUCCESS if completed or another error code on failure (Returned in R0)


function ARMv8SpinUnlockIRQFIQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;
Description: Unlock an existing Spin entry and restore the previous IRQ/FIQ state
Spin Pointer to the Spin entry to lock (Passed in R0)
Return ERROR_SUCCESS if completed or another error code on failure (Returned in R0)


function ARMv8SpinCheckIRQ(Spin:PSpinEntry):Boolean;
Description: To be documented
Return True if the mask would enable IRQ on restore, False if it would not.


function ARMv8SpinCheckFIQ(Spin:PSpinEntry):Boolean;
Description: To be documented
Return True if the mask would enable FIQ on restore, False if it would not.


function ARMv8SpinExchangeIRQ(Spin1,Spin2:PSpinEntry):LongWord;
Description: To be documented
Note None documented


function ARMv8SpinExchangeFIQ(Spin1,Spin2:PSpinEntry):LongWord;
Description: To be documented
Note None documented


function ARMv8MutexLock(Mutex:PMutexEntry):LongWord; assembler; nostackframe;
Description: Lock an existing Mutex entry
Mutex Pointer to the Mutex entry to lock (Passed in R0)
Return ERROR_SUCCESS if completed or another error code on failure (Returned in R0)


function ARMv8MutexUnlock(Mutex:PMutexEntry):LongWord; assembler; nostackframe;
Description: Unlock an existing Mutex entry
Mutex Pointer to the Mutex entry to lock (Passed in R0)
Return ERROR_SUCCESS if completed or another error code on failure (Returned in R0)


function ARMv8MutexTryLock(Mutex:PMutexEntry):LongWord; assembler; nostackframe;
Description: Try to lock an existing Mutex entry
Mutex Pointer to the Mutex entry to try to lock (Passed in R0)
Return ERROR_SUCCESS if completed, ERROR_LOCKED if already locked or another error code on failure (Returned in R0).


function ARMv8ThreadGetCurrent:TThreadHandle; assembler; nostackframe;
Description: Get the current thread Id from the c13 (Thread and process ID) register of system control coprocessor CP15
Note See page ???


function ARMv8ThreadSetCurrent(Thread:TThreadHandle):LongWord; assembler; nostackframe;
Description: Set the current thread Id in the c13 (Thread and process ID) register of system control coprocessor CP15
Note See page ???


function ARMv8ThreadSetupStack(StackBase:Pointer; StartProc:TThreadStart; ReturnProc:TThreadEnd; Parameter:Pointer):Pointer;
Description: Set up the context record and arguments on the stack for a new thread
StackBase Pointer to the base (highest address) of the allocated stack (as returned by ThreadAllocateStack
StartProc The procedure the thread will start executing when resumed
ReturnProc The procedure the thread will return to on exit
Return Pointer to the starting address of the stack, which will be the Stack Pointer on the first context switch.
Note At the point of a context switch the thread stack will look like this:


(Base "Highest Address" of Stack)
.
.
.
.
cpsr <- The current program status register value to load on return from the context switch
(On Interrupt: Includes the flags and control bits for the interrupted thread)
(On Yield: Includes the control bits only for the yielded thread)
(On Create: Includes the control bits only for the new thread)
lr/pc <- The address to return to from the context switch
(On Interrupt: The location the thread was at before interrupt)
(On Yield: The location to return to in SchedulerReschedule)
(On Create: The location of StartProc for the new thread)

lr <- The lr value prior to the context switch
(On Interrupt: The value of lr before the thread was interrupted)
(On Yield: The location to return to in SchedulerReschedule)
(On Create: The location of ReturnProc for the new thread)

r12 <-
r11 <-
r10 <-
r9 <-
r8 <-
r7 <-
r6 <- The value of these registers prior to the context switch
r5 <- (On Interrupt: The values before the thread was interrupted)
r4 <- (On Yield: The values on return to SchedulerReschedule)
r3 <- (On Create: The values on entry to StartProc as set by ThreadSetupStack)
r2 <-
r1 <-
r0 <-

d15 <-
d14 <-
d13 <-
d12 <-
d11 <-
d10 <-
d9 <-
d8 <- The value of these floating point registers prior to the context switch
d7 <- (On Interrupt: The values before the thread was interrupted)
d6 <- (On Yield: The values on return to SchedulerReschedule)
d5 <- (On Create: The values on entry to StartProc as set by ThreadSetupStack)
d4 <-
d3 <-
d2 <-
d1 <-
d0 <-

fpscr <- The floating point FPSCR register
fpexc <- The floating point FPEXC register (Current StackPointer points to here)
.
.
.
.
(Top "Lowest Address" of Stack)

On exit from a standard context switch as performed by SchedulerReschedule the first value (Highest Address) of lr is used by the RFE (Return From Exception) instruction to load the pc which also loads the saved cpsr value.

On exit from an IRQ or FIQ context switch as performed by SchedulerSwitch the first value (Highest Address) of lr is used by the interrupt handler to return from the interrupt.

A standard context switch uses r12 to save the cpsr value (and RFE to restore it). Because the standard context switch is called from a routine which will have saved the value of r12 (which is caller save in the ARM ABI) then we do not need to save the original value of r12.

An IRQ or FIQ context switch uses the SRS (Store Return State) and RFE (Return From Exception) instructions to save and restore the cpsr value from the spsr value of either IRQ or FIQ mode.


ARMv8 IRQ functions

function ARMv8DispatchIRQ(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle; inline;
Description: To be documented
Note None documented


ARMv8 FIQ functions

function ARMv8DispatchFIQ(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle; inline;
Description: To be documented
Note None documented


ARMv8 SWI functions

function ARMv8DispatchSWI(CPUID:LongWord; Thread:TThreadHandle; Request:PSystemCallRequest):TThreadHandle; inline;
Description: To be documented
Note None documented


ARMv8 interrupt functions

procedure ARMv8ResetHandler; assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMv8UndefinedInstructionHandler; assembler; nostackframe;
Description: Handle an undefined instruction exception
Note This routine is registered as the vector for undefined instruction exception in the vector table loaded during startup


procedure ARMv8SoftwareInterruptHandler; assembler; nostackframe;
Description: Handle a software interrupt (SWI) from a system call (SVC)
Note This routine is registered as the vector for SWI requests in the vector table loaded during startup. When the processor executes an SVC it switches to SWI mode, stores the address of the next instruction in the SWI mode link register (lr_svc) and saves the current program status register into the SWI mode saved program status register (spsr_svc).


The SWI handler first saves the SWI mode lr and spsr (which represent the location and state to return to) onto the SYS mode stack using the srsdb (Store Return State Decrement Before) instruction.

The SWI handler then switches to SYS mode and saves all the neccessary registers for the return to the interrupted thread before switching back to SWI mode in order to process the software interrupt. Because we arrive here from an interrupt the thread that was executing has no opportunity to save registers and will be unaware on return that it was interrupted. For this reason we must save all of the general purpose registers (r0 to r12) as well as the SYS mode link register (lr). We do not save the stack pointer (r13) because we use it to store the other registers and will return it to the correct value before we return from the SWI handler. The program counter (r15) does not need to be saved as it now points to this code.

The SystemCall function should pass the parameters of the call as follows:

R0 - System Call Number (eg SYSTEM_CALL_CONTEXT_SWITCH)
R1 - Parameter 1
R2 - Parameter 2
R3 - Parameter 3

To process the software interrupt
??????

To return from the software interrupt
??????


procedure ARMv8PrefetchAbortHandler; assembler; nostackframe;
Description: Handle a prefetch abort exception
Note This routine is registered as the vector for prefetch abort exception in the vector table loaded during startup


procedure ARMv8DataAbortHandler; assembler; nostackframe;
Description: Handle a data abort exception
Note This routine is registered as the vector for data abort exception in the vector table loaded during startup


procedure ARMv8ReservedHandler; assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMv8IRQHandler; assembler; nostackframe;
Description: Handle an interrupt request IRQ from an interrupt source
Note This routine is registered as the vector for IRQ requests in the vector table loaded during startup.


At the end of each instruction the processor checks the IRQ line and if triggered it will lookup the vector in the vector table and jump to the routine listed.

When the processor receives an IRQ it switches to IRQ mode, stores the address of the next instruction in the IRQ mode link register (lr_irq) and saves the current program status register into the IRQ mode saved program status register (spsr_irq).

The IRQ handler first saves the IRQ mode lr and spsr (which represent the location and state to return to) onto the SYS mode stack using the srsdb (Store Return State Decrement Before) instruction.

The IRQ handler then switches to SYS mode and saves all the neccessary registers for the return to the interrupted thread before switching back to IRQ mode in order to process the interrupt request. Because we arrive here from an interrupt the thread that was executing has no opportunity to save registers and will be unaware on return that it was interrupted. For this reason we must save all of the general purpose registers (r0 to r12) as well as the SYS mode link register (lr). We do not save the stack pointer (r13) because we use it to store the other registers and will return it to the correct value before we return from the IRQ handler. The program counter (r15) does not need to be saved as it now points to this code.

To process the interrupt request the handler calls the DispatchIRQ function which will dispatch the interrupt to a registered handler for processing. The handler must clear the interrupt source before it returns or the interrupt will simply occur again immediately once reenabled.

To return from the interrupt request the handler uses the rfeia (Return From Exception Increment After) instruction which will load the pc and cpsr from the SYS mode stack.


procedure ARMv8FIQHandler; assembler; nostackframe;
Description: Handle a fast interrupt request FIQ from an interrupt source
Note This routine is registered as the vector for FIQ requests in the vector table loaded during startup.


At the end of each instruction the processor checks the FIQ line and if triggered it will lookup the vector in the vector table and jump to the routine listed.

When the processor receives an FIQ it switches to FIQ mode, stores the address of the next instruction in the FIQ mode link register (lr_fiq) and saves the current program status register into the FIQ mode saved program status register (spsr_fiq).

The FIQ handler first checks the spsr to determine if the task being interrupted is a normal thread or an exception or interrupt handler.
The FIQ handler then saves the FIQ mode lr and spsr (which represent the location and state to return to) onto either the SYS mode or SVC mode stack using the srsdb (Store Return State Decrement Before) instruction depending on the value of spsr.

The FIQ handler switches to SYS or SVC mode and saves all the neccessary registers for the return to the interrupted task before switching back to FIQ mode in order to process the interrupt request. Because we arrive here from an interrupt the task that was executing has no opportunity to save registers and will be unaware on return that it was interrupted. For this reason we must save all of the general purpose registers (r0 to r12) as well as the SYS mode link register (lr). We do not save the stack pointer (r13) because we use it to store the other registers and will return it to the correct value before we return from the FIQ handler. The program counter (r15) does not need to be saved as it now points to this code.

To process the fast interrupt request the handler calls the DispatchFIQ function which will dispatch the interrupt to a registered handler for processing. The handler must clear the interrupt source before it returns or the fast interrupt will simply occur again immediately once reenabled.

To return from the fast interrupt request the handler uses the rfeia (Return From Exception Increment After) instruction which will load the pc and cpsr from the stack of the current mode (SYS or SVC).


ARMv8 helper functions

function ARMv8GetFPEXC:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8GetFPSCR:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMv8StartMMU; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8GetTimerState(Timer:LongWord):LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMv8SetTimerState(Timer,State:LongWord); assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8GetTimerCount(Timer:LongWord):Int64; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8GetTimerValue(Timer:LongWord):LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMV8SetTimerValue(Timer,Value:LongWord); assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8GetTimerCompare(Timer:LongWord):Int64; assembler; nostackframe;
Description: To be documented
Note None documented


procedure ARMV8SetTimerCompare(Timer,High,Low:LongWord); assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8GetTimerFrequency:LongWord; assembler; nostackframe;
Description: To be documented
Note None documented


function ARMv8GetPageTableCoarse(Address:PtrUInt):LongWord;
Description: Get the descriptor for a Coarse Page Table entry (1MB)
Note See page ???


function ARMv8SetPageTableCoarse(Address,CoarseAddress:PtrUInt; Flags:Word):Boolean;
Description: Set the descriptor for a Coarse Page Table entry (1MB)
Note See page ???

Caller must call ARMv8InvalidateTLB after changes if MMU is enabled


function ARMv8GetPageTableLarge(Address:PtrUInt):LongWord;
Description: Get the descriptor for a Large Page Table entry (64KB)
Note See page ???


function ARMv8SetPageTableLarge(Address,PhysicalAddress:PtrUInt; Flags:Word):Boolean;
Description: Set the descriptor for a Large Page Table entry (64KB)
PageTable Large Page Table descriptors must begin on a 16 longword (64 byte) boundary and be repeated for 16 consecutive longwords
Note See page ???

Caller must call ARMv8InvalidateTLB after changes if MMU is enabled


function ARMv8GetPageTableSmall(Address:PtrUInt):LongWord;
Description: Get the descriptor for a Small Page Table entry (4KB)
Note See page ???


function ARMv8SetPageTableSmall(Address,PhysicalAddress:PtrUInt; Flags:Word):Boolean;
Description: Set the descriptor for a Small Page Table entry (4KB)
Note See page ???

Caller must call ARMv8InvalidateTLB after changes if MMU is enabled


function ARMv8GetPageTableSection(Address:PtrUInt):LongWord;
Description: Get the descriptor for a Page Table Section (1MB) or Supersection (16MB)
Note See page ???


function ARMv8SetPageTableSection(Address,PhysicalAddress:PtrUInt; Flags:LongWord):Boolean;
Description: Set the descriptor for a Page Table Section (1MB)
Note See page ???

Caller must call ARMv8InvalidateTLB after changes if MMU is enabled


function ARMv8SetPageTableSupersection(Address,PhysicalAddress:PtrUInt; Flags:LongWord):Boolean;
Description: Set the descriptor for a Page Table Supersection (16MB)
PageTable Supersection Page Table descriptors must begin on a 16 longword (64 byte) boundary and be repeated for 16 consecutive longwords
Note See page ???

Caller must call ARMv8InvalidateTLB after changes if MMU is enabled


Return to Unit Reference