Difference between revisions of "Unit PlatformARMv6"

Latest revision as of 01:35, 22 April 2022

`ARMV6_CP15_C0_CTR_CTYPE_MASK = ($F shl 25);`	The Cache type bits provide information about the cache architecture (b1110 in the ARM1176JZF-S processor)
`ARMV6_CP15_C0_CTR_S = (1 shl 24);`	S = 1, indicates that the processor has separate instruction and data caches and not a unified cache

`ARMV6_CP15_C0_CTR_DP = (1 shl 23);`	The P, Page, bit indicates restrictions on page allocation for bits [13:12] of the VA For ARM1176JZF-S processors, the P bit is set if the cache size is greater than 16KB.
`ARMV6_CP15_C0_CTR_DSIZE_MASK = ($F shl 18);`	The Size field indicates the cache size in conjunction with the M bit
`ARMV6_CP15_C0_CTR_DSIZE_128K = (8 shl 18);`	128KB cache, not supported
`ARMV6_CP15_C0_CTR_DSIZE_64K = (7 shl 18);`	64KB cache
`ARMV6_CP15_C0_CTR_DSIZE_32K = (6 shl 18);`	32KB cache
`ARMV6_CP15_C0_CTR_DSIZE_16K = (5 shl 18);`	16KB cache
`ARMV6_CP15_C0_CTR_DSIZE_8K = (4 shl 18);`	8KB cache
`ARMV6_CP15_C0_CTR_DSIZE_4K = (3 shl 18);`	4KB cache
`ARMV6_CP15_C0_CTR_DSIZE_2K = (2 shl 18);`	2KB cache, not supported
`ARMV6_CP15_C0_CTR_DSIZE_1K = (1 shl 18);`	1KB cache, not supported
`ARMV6_CP15_C0_CTR_DSIZE_05K = (0 shl 18);`	0.5KB cache, not supported
`ARMV6_CP15_C0_CTR_DASSOC_MASK = (7 shl 15);`	b010, indicates that the ARM1176JZF-S processor has 4-way associativity
`ARMV6_CP15_C0_CTR_DM = (1 shl 14);`	Indicates the cache size and cache associativity values in conjunction with the Size and Assoc fields (In the ARM1176JZF-S processor the M bit is set to 0).
`ARMV6_CP15_C0_CTR_DLEN_MASK = (3 shl 12);`	b10, indicates that ARM1176JZF-S processor has a cache line length of 8 words, that is 32 byte.
`ARMV6_CP15_C0_CTR_DLEN_32 = (2 shl 12);`

`ARMV6_CP15_C0_CTR_IP = (1 shl 11);`	The P, Page, bit indicates restrictions on page allocation for bits [13:12] of the VA For ARM1176JZF-S processors, the P bit is set if the cache size is greater than 16KB.
`ARMV6_CP15_C0_CTR_ISIZE_MASK = ($F shl 6);`	The Size field indicates the cache size in conjunction with the M bit
`ARMV6_CP15_C0_CTR_ISIZE_128K = (8 shl 6);`	128KB cache, not supported
`ARMV6_CP15_C0_CTR_ISIZE_64K = (7 shl 6);`	64KB cache
`ARMV6_CP15_C0_CTR_ISIZE_32K = (6 shl 6);`	32KB cache
`ARMV6_CP15_C0_CTR_ISIZE_16K = (5 shl 6);`	16KB cache
`ARMV6_CP15_C0_CTR_ISIZE_8K = (4 shl 6);`	8KB cache
`ARMV6_CP15_C0_CTR_ISIZE_4K = (3 shl 6);`	4KB cache
`ARMV6_CP15_C0_CTR_ISIZE_2K = (2 shl 6);`	2KB cache, not supported
`ARMV6_CP15_C0_CTR_ISIZE_1K = (1 shl 6);`	1KB cache, not supported
`ARMV6_CP15_C0_CTR_ISIZE_05K = (0 shl 6);`	0.5KB cache, not supported
`ARMV6_CP15_C0_CTR_IASSOC_MASK = (7 shl 3);`	b010, indicates that the ARM1176JZF-S processor has 4-way associativity
`ARMV6_CP15_C0_CTR_IM = (1 shl 2);`	Indicates the cache size and cache associativity values in conjunction with the Size and Assoc fields (In the ARM1176JZF-S processor the M bit is set to 0).
`ARMV6_CP15_C0_CTR_ILEN_MASK = (3 shl 0);`	b10, indicates that ARM1176JZF-S processor has a cache line length of 8 words, that is 32 bytes.
`ARMV6_CP15_C0_CTR_ILEN_32 = (2 shl 0);`

[Expand]

ARMv6 CP15 C1 control ARMV6_CP15_C1_*

[Expand]

ARMv6 CP15 C1 auxiliary control ARMV6_CP15_C1_AUX_*

[Expand]

ARMv6 CP15 C1 coprocessor access control ARMV6_CP15_C1_CP*

`ARMV6_CP15_C1_CP0_NONE = (0 shl 0);`	Access denied (Default)
`ARMV6_CP15_C1_CP0_SYS = (1 shl 0);`	Privileged mode access only
`ARMV6_CP15_C1_CP0_USER = (3 shl 0);`	Privileged and User mode access

`ARMV6_CP15_C1_CP1_NONE = (0 shl 2);`	Access denied (Default)
`ARMV6_CP15_C1_CP1_SYS = (1 shl 2);`	Privileged mode access only
`ARMV6_CP15_C1_CP1_USER = (3 shl 2);`	Privileged and User mode access

`ARMV6_CP15_C1_CP2_NONE = (0 shl 4);`	Access denied (Default)
`ARMV6_CP15_C1_CP2_SYS = (1 shl 4);`	Privileged mode access only
`ARMV6_CP15_C1_CP2_USER = (3 shl 4);`	Privileged and User mode access

`ARMV6_CP15_C1_CP3_NONE = (0 shl 6);`	Access denied (Default)
`ARMV6_CP15_C1_CP3_SYS = (1 shl 6);`	Privileged mode access only
`ARMV6_CP15_C1_CP3_USER = (3 shl 6);`	Privileged and User mode access

`ARMV6_CP15_C1_CP4_NONE = (0 shl 8);`	Access denied (Default)
`ARMV6_CP15_C1_CP4_SYS = (1 shl 8);`	Privileged mode access only
`ARMV6_CP15_C1_CP4_USER = (3 shl 8);`	Privileged and User mode access

`ARMV6_CP15_C1_CP5_NONE = (0 shl 10);`	Access denied (Default)
`ARMV6_CP15_C1_CP5_SYS = (1 shl 10);`	Privileged mode access only
`ARMV6_CP15_C1_CP5_USER = (3 shl 10);`	Privileged and User mode access

`ARMV6_CP15_C1_CP6_NONE = (0 shl 12);`	Access denied (Default)
`ARMV6_CP15_C1_CP6_SYS = (1 shl 12);`	Privileged mode access only
`ARMV6_CP15_C1_CP6_USER = (3 shl 12);`	Privileged and User mode access

`ARMV6_CP15_C1_CP7_NONE = (0 shl 14);`	Access denied (Default)
`ARMV6_CP15_C1_CP7_SYS = (1 shl 14);`	Privileged mode access only
`ARMV6_CP15_C1_CP7_USER = (3 shl 14);`	Privileged and User mode access

`ARMV6_CP15_C1_CP8_NONE = (0 shl 16);`	Access denied (Default)
`ARMV6_CP15_C1_CP8_SYS = (1 shl 16);`	Privileged mode access only
`ARMV6_CP15_C1_CP8_USER = (3 shl 16);`	Privileged and User mode access

`ARMV6_CP15_C1_CP9_NONE = (0 shl 18);`	Access denied (Default)
`ARMV6_CP15_C1_CP9_SYS = (1 shl 18);`	Privileged mode access only
`ARMV6_CP15_C1_CP9_USER = (3 shl 18);`	Privileged and User mode access

`ARMV6_CP15_C1_CP10_NONE = (0 shl 20);`	Access denied (Default)
`ARMV6_CP15_C1_CP10_SYS = (1 shl 20);`	Privileged mode access only
`ARMV6_CP15_C1_CP10_USER = (3 shl 20);`	Privileged and User mode access

`ARMV6_CP15_C1_CP11_NONE = (0 shl 22);`	Access denied (Default)
`ARMV6_CP15_C1_CP11_SYS = (1 shl 22);`	Privileged mode access only
`ARMV6_CP15_C1_CP11_USER = (3 shl 22);`	Privileged and User mode access

`ARMV6_CP15_C1_CP12_NONE = (0 shl 24);`	Access denied (Default)
`ARMV6_CP15_C1_CP12_SYS = (1 shl 24);`	Privileged mode access only
`ARMV6_CP15_C1_CP12_USER = (3 shl 24);`	Privileged and User mode access

`ARMV6_CP15_C1_CP13_NONE = (0 shl 26);`	Access denied (Default)
`ARMV6_CP15_C1_CP13_SYS = (1 shl 26);`	Privileged mode access only
`ARMV6_CP15_C1_CP13_USER = (3 shl 26);`	Privileged and User mode access
Coprocessors CP14 (Debug Control) and CP15 (System Control) are not affected by the Coprocessor Access Control Register

[Expand]

ARMv6 CP15 C2 translation table base ARMV6_CP15_C2_TTBR_*

[Expand]

ARMv6 CP15 C3 domain access control ARMV6_CP15_C3_DOMAIN*

`ARMV6_CP15_C3_DOMAIN0_NONE = (0 shl 0);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN0_CLIENT = (1 shl 0);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN0_MANAGER = (3 shl 0);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN1_NONE = (0 shl 2);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN1_CLIENT = (1 shl 2);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN1_MANAGER = (3 shl 2);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN2_NONE = (0 shl 4);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN2_CLIENT = (1 shl 4);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN2_MANAGER = (3 shl 4);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN3_NONE = (0 shl 6);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN3_CLIENT = (1 shl 6);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN3_MANAGER = (3 shl 6);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN4_NONE = (0 shl 8);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN4_CLIENT = (1 shl 8);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN4_MANAGER = (3 shl 8);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN5_NONE = (0 shl 10);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN5_CLIENT = (1 shl 10);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN5_MANAGER = (3 shl 10);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN6_NONE = (0 shl 12);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN6_CLIENT = (1 shl 12);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN6_MANAGER = (3 shl 12);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN7_NONE = (0 shl 14);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN7_CLIENT = (1 shl 14);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN7_MANAGER = (3 shl 14);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN8_NONE = (0 shl 16);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN8_CLIENT = (1 shl 16);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN8_MANAGER = (3 shl 16);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN9_NONE = (0 shl 18);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN9_CLIENT = (1 shl 18);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN9_MANAGER = (3 shl 18);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN10_NONE = (0 shl 20);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN10_CLIENT = (1 shl 20);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN10_MANAGER = (3 shl 20);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN11_NONE = (0 shl 22);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN11_CLIENT = (1 shl 22);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN11_MANAGER = (3 shl 22);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN12_NONE = (0 shl 24);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN12_CLIENT = (1 shl 24);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN12_MANAGER = (3 shl 24);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN13_NONE = (0 shl 26);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN13_CLIENT = (1 shl 26);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN13_MANAGER = (3 shl 26);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN14_NONE = (0 shl 28);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN14_CLIENT = (1 shl 28);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN14_MANAGER = (3 shl 28);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

`ARMV6_CP15_C3_DOMAIN15_NONE = (0 shl 30);`	No access, Any access generates a domain fault (Default)
`ARMV6_CP15_C3_DOMAIN15_CLIENT = (1 shl 30);`	Client, Accesses are checked against the access permission bits in the TLB entry
`ARMV6_CP15_C3_DOMAIN15_MANAGER = (3 shl 30);`	Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated

[Expand]

ARMv6 floating-point exception ARMV6_FPEXC_*

[Expand]

ARMv6 level one descriptor type ARMV6_L1D_TYPE_*

[Expand]

ARMv6 level one descriptor flag ARMV6_L1D_FLAG_*

[Expand]

ARMv6 level one descriptor mask ARMV6_L1D_*_MASK

[Expand]

ARMv6 level one descriptor TEX value ARMV6_L1D_TEX*

[Expand]

ARMv6 level one descriptor AP value ARMV6_L1D_AP*

[Expand]

ARMv6 level one descriptor permission value ARMV6_L1D_ACCESS_*

[Expand]

ARMv6 level one descriptor cache value ARMV6_L1D_CACHE_*

[Expand]

ARMv6 level two descriptor type ARMV6_L2D_TYPE_*

[Expand]

ARMv6 level two descriptor flag ARMV6_L2D_FLAG_*

[Expand]

ARMv6 level two descriptor mask ARMV6_L2D_*_MASK

[Expand]

ARMv6 level two descriptor large TEX value ARMV6_L2D_LARGE_TEX*

[Expand]

ARMv6 level two descriptor small TEX value ARMV6_L2D_SMALL_TEX*

[Expand]

ARMv6 level two descriptor AP value ARMV6_L2D_AP*

[Expand]

ARMv6 level two descriptor permission value ARMV6_L2D_ACCESS_*

[Expand]

ARMv6 level two descriptor large cache value ARMV6_L2D_LARGE_CACHE_*

[Expand]

ARMv6 level two descriptor small cache value ARMV6_L2D_SMALL_CACHE_*

[Expand]

ARMv6 specific constants ARMV6_*

Type definitions

ARMv6 page table initialization

`TARMv6PageTableInit = procedure;`

ARMv6 dispatch IRQ

`TARMv6DispatchIRQ = function(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;`

ARMv6 dispatch FIQ

`TARMv6DispatchFIQ = function(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;`

ARMv6 dispatch SWI

`TARMv6DispatchSWI = function(CPUID:LongWord; Thread:TThreadHandle; Request:PSystemCallRequest):TThreadHandle;`

Public variables

ARMv6 specific variables

`ARMv6Initialized:Boolean;`

`ARMv6DummySTREX:LongWord;`	Variable to allow a dummy STREX operation to be performed after each context switch as required by ARM documentation

Page table handlers

`ARMv6PageTableInitHandler:TARMv6PageTableInit;`

IRQ handlers

`ARMv6DispatchIRQHandler:TARMv6DispatchIRQ;`

FIQ handlers

`ARMv6DispatchFIQHandler:TARMv6DispatchFIQ;`

SWI handlers

`ARMv6DispatchSWIHandler:TARMv6DispatchSWI;`

Function declarations

Initialization functions

[Expand]

procedure ARMv6Init;

Description: To be documented

ARMv6 platform functions

[Expand]

procedure ARMv6CPUInit; assembler; nostackframe;

Description: To be documented

[Expand]

procedure ARMv6FPUInit; assembler; nostackframe;

Description: To be documented

[Expand]

procedure ARMv6MMUInit;

Description: To be documented

[Expand]

procedure ARMv6CacheInit; assembler; nostackframe;

Description: To be documented

[Expand]

procedure ARMv6PageTableInit;

Description: Initialize the Hardware Page Tables before enabling the MMU

[Expand]

procedure ARMv6SystemCall(Number:LongWord; Param1,Param2,Param3:PtrUInt); assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6CPUGetMode:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6CPUGetState:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6CPUGetMainID:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6CPUGetModel:LongWord;

Description: To be documented

[Expand]

function ARMv6CPUGetRevision:LongWord;

Description: To be documented

[Expand]

function ARMv6CPUGetDescription:String;

Description: To be documented

[Expand]

function ARMv6FPUGetState:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6L1CacheGetType:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6L1DataCacheGetSize:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6L1DataCacheGetLineSize:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6L1InstructionCacheGetSize:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6L1InstructionCacheGetLineSize:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

procedure ARMv6Halt; assembler; nostackframe; public name '_haltproc';

Description: The purpose of the Wait For Interrupt operation is to put the processor in to a low power state

[Expand]

procedure ARMv6Pause; assembler; nostackframe;

Description: The purpose of the Wait For Interrupt operation is to put the processor in to a low power state

[Expand]

procedure ARMv6WaitForEvent; assembler; nostackframe;

Description: Wait For Event not available in ARMv6, do a Wait For Interrupt instead

[Expand]

procedure ARMv6WaitForInterrupt; assembler; nostackframe;

Description: The purpose of the Wait For Interrupt operation is to put the processor in to a low power state

[Expand]

procedure ARMv6DataMemoryBarrier; assembler; nostackframe;

Description: Perform a data memory barrier operation using the c7 (Cache Operations) register of system control coprocessor CP15

[Expand]

procedure ARMv6DataSynchronizationBarrier; assembler; nostackframe;

Description: Perform a data synchronization barrier operation using the c7 (Cache Operations) register of system control coprocessor CP15

[Expand]

procedure ARMv6InstructionMemoryBarrier; assembler; nostackframe;

Description: Perform a Flush Prefetch Buffer operation

[Expand]

procedure ARMv6InvalidateTLB; assembler; nostackframe;

Description: Perform an invalidate entire TLB (Unlocked/Unified) operation using the c8 (TLB Operations) register of system control coprocessor CP15

[Expand]

procedure ARMv6InvalidateDataTLB; assembler; nostackframe;

Description: Perform an invalidate data TLB (Unlocked/Data) operation using the c8 (TLB Operations) register of system control coprocessor CP15

[Expand]

procedure ARMv6InvalidateInstructionTLB; assembler; nostackframe;

Description: Perform an invalidate instruction TLB (Unlocked/Instruction) operation using the c8 (TLB Operations) register of system control coprocessor CP15

[Expand]

procedure ARMv6InvalidateCache; assembler; nostackframe;

Description: Perform an invalidate both caches operation using the c7 (Cache Operations) register of system control coprocessor CP15

[Expand]

procedure ARMv6CleanDataCache; assembler; nostackframe;

Description: Perform a clean entire data cache operation using the c7 (Cache Operations) register of system control coprocessor CP15

[Expand]

procedure ARMv6InvalidateDataCache; assembler; nostackframe;

Description: Perform an invalidate entire data cache operation using the c7 (Cache Operations) register of system control coprocessor CP15

[Expand]

procedure ARMv6CleanAndInvalidateDataCache; assembler; nostackframe;

Description: Perform a clean and invalidate entire data cache operation using the c7 (Cache Operations) register of system control coprocessor CP15

[Expand]

procedure ARMv6InvalidateInstructionCache; assembler; nostackframe;

Description: Perform an invalidate entire instruction cache operation using the c7 (Cache Operations) register of system control coprocessor CP15

[Expand]

procedure ARMv6CleanDataCacheRangeInternal(Address:PtrUInt; Size:LongWord); assembler; nostackframe;

Description: Perform a clean data cache range operation

[Expand]

procedure ARMv6CleanDataCacheRange(Address:PtrUInt; Size:LongWord);

Description: Perform a clean data cache range, limiting the size for each operation to 4MB because some processors fail to correctly operate with larger ranges

[Expand]

procedure ARMv6InvalidateDataCacheRangeInternal(Address:PtrUInt; Size:LongWord); assembler; nostackframe;

Description: Perform an invalidate data cache range operation

[Expand]

procedure ARMv6InvalidateDataCacheRange(Address:PtrUInt; Size:LongWord);

Description: Perform an invalidate data cache range, limiting the size for each operation to 4MB because some processors fail to correctly operate with larger ranges

[Expand]

procedure ARMv6CleanAndInvalidateDataCacheRangeInternal(Address:PtrUInt; Size:LongWord); assembler; nostackframe;

Description: Perform a clean and invalidate data cache range operation

[Expand]

procedure ARMv6CleanAndInvalidateDataCacheRange(Address:PtrUInt; Size:LongWord);

Description: Perform a clean and invalidate data cache range, limiting the size for each operation to 4MB because some processors fail to correctly operate with larger ranges

[Expand]

procedure ARMv6InvalidateInstructionCacheRangeInternal(Address:PtrUInt; Size:LongWord); assembler; nostackframe;

Description: Perform an invalidate instruction cache range operation

[Expand]

procedure ARMv6InvalidateInstructionCacheRange(Address:PtrUInt; Size:LongWord);

Description: Perform an invalidate instruction cache range operation, limiting the size for each operation to 4MB because some processors fail to correctly operate with larger ranges

[Expand]

procedure ARMv6FlushPrefetchBuffer; assembler; nostackframe;

Description: Perform a Flush Prefetch Buffer operation

[Expand]

procedure ARMv6FlushBranchTargetCache; assembler; nostackframe;

Description: Perform a Flush Entire Branch Target Cache

[Expand]

procedure ARMv6ContextSwitch(OldStack,NewStack:Pointer; NewThread:TThreadHandle); assembler; nostackframe;

Description: Perform a context switch from one thread to another as a result of a thread yielding, sleeping or waiting

OldStack	The address to save the stack pointer to for the current thread (Passed in r0)
NewThread	The address to restore the stack pointer from for the new thread (Passed in r1)
NewThread	The handle of the new thread to switch to (Passed in r2)
Note	At the point of the actual context switch (str sp/ldr sp) the thread stacks will look like this: (See: ARMv6ThreadSetupStack for additional information) (Base "Highest Address" of Stack) . . . . cpsr <- The current program status register value to load on return from the context switch lr/pc <- The address to return to from the context switch lr <- The lr value prior to the context switch r12 <- r11 <- r10 <- r9 <- r8 <- r7 <- r6 <- The value of these registers prior to the context switch r5 <- r4 <- r3 <- r2 <- r1 <- r0 <- d15 <- d14 <- d13 <- d12 <- d11 <- d10 <- d9 <- d8 <- The value of these floating point registers prior to the context switch d7 <- d6 <- d5 <- d4 <- d3 <- d2 <- d1 <- d0 <- fpscr <- The floating point FPSCR register fpexc <- The floating point FPEXC register (Current StackPointer points to here) . . . . (Top "Lowest Address" of Stack) This form of context switch uses r12 to save the cpsr value (and RFE to restore it). Because this context switch is called from a routine which will have saved the value of r12 (which is caller save in the ARM ABI) then we do not need to save the original value of r12. The context switch will be performed from SYS mode to SYS mode, the cpsr value will include the control bits (Mode and IRQ/FIQ state) but not the flags values. Again the ARM ABI does not require that the flags be saved by the callee and so the caller would have accounted for any needed flags before calling. If the thread to be resumed was interrupted by an IRQ or FIQ then the cpsr will also contain the flags etc as they were at the point of interrupt. We do not need to account for the state bits in the cpsr since all operations are performed in ARM mode at present. The main requirement of this routine is to ensure that the context record on the stack matches exactly that which is created on an interrupt and also that created by ThreadSetupStack for a new thread. If this is correct then the next context switch for any given thread can be either by a call to reschedule or by an interrupt. Equally a new thread can be first run from a context switch that resulted from either a call to reschedule or an interrupt. Note that this routine could use: pop (lr) pop (r12) msr cpsr_c, r12 mov pc, lr To return but that would mess up the value of r12, lr and the cpsr flags etc if the thread being resumed was interrupted by an IRQ, FIQ or SWI. The use of RFE here allows for exactly the same behaviour no matter which way the context record is saved and restored.

[Expand]

procedure ARMv6ContextSwitchIRQ(OldStack,NewStack:Pointer; NewThread:TThreadHandle); assembler; nostackframe;

Description: Perform a context switch from one thread to another as a result of an interrupt request (IRQ)

[Expand]

procedure ARMv6ContextSwitchFIQ(OldStack,NewStack:Pointer; NewThread:TThreadHandle); assembler; nostackframe;

Description: Perform a context switch from one thread to another as a result of a fast interrupt request (FIQ)

[Expand]

procedure ARMv6ContextSwitchSWI(OldStack,NewStack:Pointer; NewThread:TThreadHandle);

Description: Perform a context switch from one thread to another as a result of a software interrupt (SWI)

[Expand]

function ARMv6InterlockedOr(var Target:LongInt; Value:LongInt):LongInt; assembler; nostackframe;

Description: Perform an atomic OR operation using LDREX/STREX

[Expand]

function ARMv6InterlockedXor(var Target:LongInt; Value:LongInt):LongInt; assembler; nostackframe;

Description: Perform an atomic XOR operation using LDREX/STREX

[Expand]

function ARMv6InterlockedAnd(var Target:LongInt; Value:LongInt):LongInt; assembler; nostackframe;

Description: Perform an atomic AND operation using LDREX/STREX

[Expand]

function ARMv6InterlockedDecrement(var Target:LongInt):LongInt; assembler; nostackframe;

Description: Perform an atomic decrement operation using LDREX/STREX

[Expand]

function ARMv6InterlockedIncrement(var Target:LongInt):LongInt; assembler; nostackframe;

Description: Perform an atomic increment operation using LDREX/STREX

[Expand]

function ARMv6InterlockedExchange(var Target:LongInt; Source:LongInt):LongInt; assembler; nostackframe;

Description: Perform an atomic exchange operation using LDREX/STREX

[Expand]

function ARMv6InterlockedAddExchange(var Target:LongInt; Source:LongInt):LongInt; assembler; nostackframe;

Description: Perform an atomic add and exchange operation using LDREX/STREX

[Expand]

function ARMv6InterlockedCompareExchange(var Target:LongInt; Source,Compare:LongInt):LongInt; assembler; nostackframe;

Description: Perform an atomic compare and exchange operation using LDREX/STREX

[Expand]

procedure ARMv6PageTableGetEntry(Address:PtrUInt; var Entry:TPageTableEntry);

Description: Get and Decode the entry in the Page Table that corresponds to the supplied virtual address

[Expand]

function ARMv6PageTableSetEntry(const Entry:TPageTableEntry):LongWord;

Description: Encode and Set an entry in the Page Table that corresponds to the supplied virtual address

[Expand]

function ARMv6VectorTableGetEntry(Number:LongWord):PtrUInt;

Description: Return the address of the specified vector table entry number

[Expand]

function ARMv6VectorTableSetEntry(Number:LongWord; Address:PtrUInt):LongWord;

Description: Set the supplied address as the value of the specified vector table entry number

[Expand]

function ARMv6FirstBitSet(Value:LongWord):LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6CountLeadingZeros(Value:LongWord):LongWord; assembler; nostackframe;

Description: Equivalent of the GCC Builtin function __builtin_clz

ARMv6 thread functions

[Expand]

procedure ARMv6PrimaryInit; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6SpinLock(Spin:PSpinEntry):LongWord; assembler; nostackframe;

Description: Lock an existing Spin entry

[Expand]

function ARMv6SpinUnlock(Spin:PSpinEntry):LongWord; assembler; nostackframe;

Description: Unlock an existing Spin entry

[Expand]

function ARMv6SpinLockIRQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;

Description: Lock an existing Spin entry, disable IRQ and save the previous IRQ state

[Expand]

function ARMv6SpinUnlockIRQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;

Description: Unlock an existing Spin entry and restore the previous IRQ state

[Expand]

function ARMv6SpinLockFIQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;

Description: Lock an existing Spin entry, disable FIQ and save the previous FIQ state

[Expand]

function ARMv6SpinUnlockFIQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;

Description: Unlock an existing Spin entry and restore the previous FIQ state

[Expand]

function ARMv6SpinLockIRQFIQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;

Description: Lock an existing Spin entry, disable IRQ and FIQ and save the previous IRQ/FIQ state

[Expand]

function ARMv6SpinUnlockIRQFIQ(Spin:PSpinEntry):LongWord; assembler; nostackframe;

Description: Unlock an existing Spin entry and restore the previous IRQ/FIQ state

[Expand]

function ARMv6SpinCheckIRQ(Spin:PSpinEntry):Boolean;

Description: To be documented

[Expand]

function ARMv6SpinCheckFIQ(Spin:PSpinEntry):Boolean;

Description: To be documented

[Expand]

function ARMv6SpinExchangeIRQ(Spin1,Spin2:PSpinEntry):LongWord;

Description: To be documented

[Expand]

function ARMv6SpinExchangeFIQ(Spin1,Spin2:PSpinEntry):LongWord;

Description: To be documented

[Expand]

function ARMv6MutexLock(Mutex:PMutexEntry):LongWord; assembler; nostackframe;

Description: Lock an existing Mutex entry

[Expand]

function ARMv6MutexUnlock(Mutex:PMutexEntry):LongWord; assembler; nostackframe;

Description: Unlock an existing Mutex entry

[Expand]

function ARMv6MutexTryLock(Mutex:PMutexEntry):LongWord; assembler; nostackframe;

Description: Try to lock an existing Mutex entry

[Expand]

function ARMv6ThreadGetCurrent:TThreadHandle; assembler; nostackframe;

Description: Get the current thread Id from the c13 (Thread and process ID) register of system control coprocessor CP15

[Expand]

function ARMv6ThreadSetCurrent(Thread:TThreadHandle):LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6ThreadSetupStack(StackBase:Pointer; StartProc:TThreadStart; ReturnProc:TThreadEnd; Parameter:Pointer):Pointer;

Description: Set up the context record and arguments on the stack for a new thread

StackBase	Pointer to the base (highest address) of the allocated stack (as returned by ThreadAllocateStack
StartProc	The procedure the thread will start executing when resumed
ReturnProc	The procedure the thread will return to on exit
Return	Pointer to the starting address of the stack, which will be the Stack Pointer on the first context switch.
Note	At the point of a context switch the thread stack will look like this: (Base "Highest Address" of Stack) . . . . cpsr <- The current program status register value to load on return from the context switch (On Interrupt: Includes the flags and control bits for the interrupted thread) (On Yield: Includes the control bits only for the yielded thread) (On Create: Includes the control bits only for the new thread) lr/pc <- The address to return to from the context switch (On Interrupt: The location the thread was at before interrupt) (On Yield: The location to return to in SchedulerReschedule) (On Create: The location of StartProc for the new thread) lr <- The lr value prior to the context switch (On Interrupt: The value of lr before the thread was interrupted) (On Yield: The location to return to in SchedulerReschedule) (On Create: The location of ReturnProc for the new thread) r12 <- r11 <- r10 <- r9 <- r8 <- r7 <- r6 <- The value of these registers prior to the context switch r5 <- (On Interrupt: The values before the thread was interrupted) r4 <- (On Yield: The values on return to SchedulerReschedule) r3 <- (On Create: The values on entry to StartProc as set by ThreadSetupStack) r2 <- r1 <- r0 <- d15 <- d14 <- d13 <- d12 <- d11 <- d10 <- d9 <- d8 <- The value of these floating point registers prior to the context switch d7 <- (On Interrupt: The values before the thread was interrupted) d6 <- (On Yield: The values on return to SchedulerReschedule) d5 <- (On Create: The values on entry to StartProc as set by ThreadSetupStack) d4 <- d3 <- d2 <- d1 <- d0 <- fpscr <- The floating point FPSCR register fpexc <- The floating point FPEXC register (Current StackPointer points to here) . . . . (Top "Lowest Address" of Stack) On exit from a standard context switch as performed by SchedulerReschedule the first value (Highest Address) of lr is used by the RFE (Return From Exception) instruction to load the pc which also loads the saved cpsr value. On exit from an IRQ or FIQ context switch as performed by SchedulerSwitch the first value (Highest Address) of lr is used by the interrupt handler to return from the interrupt. A standard context switch uses r12 to save the cpsr value (and RFE to restore it). Because the standard context switch is called from a routine which will have saved the value of r12 (which is caller save in the ARM ABI) then we do not need to save the original value of r12. An IRQ or FIQ context switch uses the SRS (Store Return State) and RFE (Return From Exception) instructions to save and restore the cpsr value from the spsr value of either IRQ or FIQ mode.

ARMv6 IRQ functions

[Expand]

function ARMv6DispatchIRQ(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle; inline;

Description: To be documented

ARMv6 FIQ functions

[Expand]

function ARMv6DispatchFIQ(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle; inline;

Description: To be documented

ARMv6 SWI functions

[Expand]

function ARMv6DispatchSWI(CPUID:LongWord; Thread:TThreadHandle; Request:PSystemCallRequest):TThreadHandle; inline;

Description: To be documented

ARMv6 interrupt functions

[Expand]

procedure ARMv6ResetHandler; assembler; nostackframe;

Description: To be documented

[Expand]

procedure ARMv6UndefinedInstructionHandler; assembler; nostackframe;

Description: Handle an undefined instruction exception

[Expand]

procedure ARMv6SoftwareInterruptHandler; assembler; nostackframe;

Description: Handle a software interrupt (SWI) from a system call (SVC)

[Expand]

procedure ARMv6PrefetchAbortHandler; assembler; nostackframe;

Description: Handle a prefetch abort exception

[Expand]

procedure ARMv6DataAbortHandler; assembler; nostackframe;

Description: Handle a data abort exception

[Expand]

procedure ARMv6ReservedHandler; assembler; nostackframe;

Description: To be documented

[Expand]

procedure ARMv6IRQHandler; assembler; nostackframe;

Description: Handle an interrupt request IRQ from an interrupt source

[Expand]

procedure ARMv6FIQHandler; assembler; nostackframe;

Description: Handle a fast interrupt request FIQ from an interrupt source

Note	This routine is registered as the vector for FIQ requests in the vector table loaded during startup. At the end of each instruction the processor checks the FIQ line and if triggered it will lookup the vector in the vector table and jump to the routine listed. When the processor receives an FIQ it switches to FIQ mode, stores the address of the next instruction in the FIQ mode link register (lr_fiq) and saves the current program status register into the FIQ mode saved program status register (spsr_fiq). The FIQ handler first checks the spsr to determine if the task being interrupted is a normal thread or an exception or interrupt handler. The FIQ handler then saves the FIQ mode lr and spsr (which represent the location and state to return to) onto eihter the SYS mode or SVC mode stack using the srsdb (Store Return State Decrement Before) instruction depending on the value of spsr. The FIQ handler switches to SYS or SVC mode and saves all the neccessary registers for the return to the interrupted task before switching back to FIQ mode in order to process the interrupt request. Because we arrive here from an interrupt the task that was executing has no opportunity to save registers and will be unaware on return that it was interrupted. For this reason we must save all of the general purpose registers (r0 to r12) as well as the SYS mode link register (lr). We do not save the stack pointer (r13) because we use it to store the other registers and will return it to the correct value before we return from the FIQ handler. The program counter (r15) does not need to be saved as it now points to this code. To process the fast interrupt request the handler calls the DispatchFIQ function which will dispatch the interrupt to a registered handler for processing. The handler must clear the interrupt source before it returns or the fast interrupt will simply occur again immediately once reenabled. To return from the fast interrupt request the handler uses the rfeia (Return From Exception Increment After) instruction which will load the pc and cpsr from the stack of the current mode (SYS or SVC).

ARMv6 helper functions

[Expand]

function ARMv6GetFPEXC:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6GetFPSCR:LongWord; assembler; nostackframe;

Description: To be documented

[Expand]

procedure ARMv6StartMMU; assembler; nostackframe;

Description: To be documented

[Expand]

function ARMv6GetPageTableCoarse(Address:PtrUInt):LongWord;

Description: Get the descriptor for a Coarse Page Table entry (1MB)

[Expand]

function ARMv6SetPageTableCoarse(Address,CoarseAddress:PtrUInt; Flags:Word):Boolean;

Description: Set the descriptor for a Coarse Page Table entry (1MB)

[Expand]

function ARMv6GetPageTableLarge(Address:PtrUInt):LongWord;

Description: Get the descriptor for a Large Page Table entry (64KB)

[Expand]

function ARMv6SetPageTableLarge(Address,PhysicalAddress:PtrUInt; Flags:Word):Boolean;

Description: Set the descriptor for a Large Page Table entry (64KB)

[Expand]

function ARMv6GetPageTableSmall(Address:PtrUInt):LongWord;

Description: Get the descriptor for a Small Page Table entry (4KB)

[Expand]

function ARMv6SetPageTableSmall(Address,PhysicalAddress:PtrUInt; Flags:Word):Boolean;

Description: Set the descriptor for a Small Page Table entry (4KB)

[Expand]

function ARMv6GetPageTableSection(Address:PtrUInt):LongWord;

Description: Get the descriptor for a Page Table Section (1MB) or Supersection (16MB)

[Expand]

function ARMv6SetPageTableSection(Address,PhysicalAddress:PtrUInt; Flags:LongWord):Boolean;

Description: Set the descriptor for a Page Table Section (1MB)

[Expand]

function ARMv6SetPageTableSupersection(Address,PhysicalAddress:PtrUInt; Flags:LongWord):Boolean;

Description: Set the descriptor for a Page Table Supersection (16MB)

Return to Unit Reference

`ARMV6_CP15_C0_MAINID_IMPLEMENTOR_MASK = ($FF shl 24);`
`ARMV6_CP15_C0_MAINID_VARIANT_MASK = ($F shl 20);`
`ARMV6_CP15_C0_MAINID_ARCHITECTURE_MASK = ($F shl 16);`
`ARMV6_CP15_C0_MAINID_PARTNUMBER_MASK = ($FFF shl 4);`
`ARMV6_CP15_C0_MAINID_REVISION_MASK = ($F shl 0);`

`ARMV6_CP15_C0_MAINID_IMPLEMENTOR_ARM = ($41 shl 24);`
`ARMV6_CP15_C0_MAINID_ARCHITECTURE_CPUID = ($F shl 16);`
`ARMV6_CP15_C0_MAINID_PARTNUMBER_1176JZSF = ($B76 shl 4);`

`ARMV6_CP15_C1_FA_BIT = (1 shl 29);`	Force AP functionality in the MMU is enabled when set to 1 (Default 0)
`ARMV6_CP15_C1_TR_BIT = (1 shl 28);`	TEX remap enabled when set to 1 (TEX[2:1] become page table bits for OS) (Default 0)
`ARMV6_CP15_C1_EE_BIT = (1 shl 25);`	CPSR E bit is set to 1 on an exception when set to 1 (Default 0)
`ARMV6_CP15_C1_VE_BIT = (1 shl 24);`	Interrupt vectors are defined by the VIC interface when set to 1 (Default 0)
`ARMV6_CP15_C1_XP_BIT = (1 shl 23);`	Subpage AP bits disabled when set to 1 (Default 0)
`ARMV6_CP15_C1_U_BIT = (1 shl 22);`	Unaligned data access support enabled when set to 1 (Default 0). The processor permits unaligned loads and stores and support for mixed endian data is enabled.
`ARMV6_CP15_C1_FI_BIT = (1 shl 21);`	Low interrupt latency configuration enabled when set to 1 (Default 0)
`ARMV6_CP15_C1_L4_BIT = (1 shl 15);`	Loads to PC do not set the T bit when set to 1 (ARMv4 behavior) (Default 0)
`ARMV6_CP15_C1_RR_BIT = (1 shl 14);`	Predictable cache replacement strategy by round-robin replacement when set to 1 (Default 0)
`ARMV6_CP15_C1_V_BIT = (1 shl 13);`	High exception vectors selected when set to 1, address range = 0xFFFF0000-0xFFFF001C (Default 0)
`ARMV6_CP15_C1_I_BIT = (1 shl 12);`	L1 Instruction Cache enabled when set to 1 (Default 0)
`ARMV6_CP15_C1_Z_BIT = (1 shl 11);`	Branch prediction enabled when set to 1 (Default 0)
`ARMV6_CP15_C1_B_BIT = (1 shl 7);`	Big-endian word-invariant memory system when set to 1 (Default 0)
`ARMV6_CP15_C1_C_BIT = (1 shl 2);`	L1 Data cache enabled when set to 1 (Default 0)
`ARMV6_CP15_C1_A_BIT = (1 shl 1);`	Strict alignment fault checking enabled when set to 1 (Default 0)
`ARMV6_CP15_C1_M_BIT = (1 shl 0);`	MMU enabled when set to 1 (Default 0)

`ARMV6_CP15_C2_TTBR_BASE_MASK = $FFFFC000;`
`ARMV6_CP15_C2_TTBR_RGN_OUTER_NONCACHED = (0 shl 3);`	Outer Noncacheable (Default)
`ARMV6_CP15_C2_TTBR_RGN_OUTER_WRITE_ALLOCATE = (1 shl 3);`	Outer Write-back, Write Allocate
`ARMV6_CP15_C2_TTBR_RGN_OUTER_WRITE_THROUGH = (2 shl 3);`	Outer Write-through, No Allocate on Write
`ARMV6_CP15_C2_TTBR_RGN_OUTER_WRITE_BACK = (3 shl 3);`	Outer Write-back, No Allocate on Write
`ARMV6_CP15_C2_TTBR_P = (1 shl 2);`	If the processor supports ECC, it indicates to the memory controller it is enabled or disabled. For ARM1176JZF-S processors this is 0.
`ARMV6_CP15_C2_TTBR_S = (1 shl 1);`	Indicates the page table walk is to Shared memory if set to 1 (Default 0)
`ARMV6_CP15_C2_TTBR_C_INNER_CACHED = (1 shl 0);`	Indicates the page table walk is Inner Cacheable if set to 1 (Default 0)

`ARMV6_FPEXC_EN = (1 shl 30);`	Floating-point system is enabled and operates normally if set to 1 (Default 0)
`ARMV6_FPEXC_EX = (1 shl 31);`	If EX is set to 0 then only FPSCR and FPEXC need to be preseved on a context switch (Default 0)

See page 6-36 of the ARM1176JZF-S Technical Reference Manual
These formats assume that the XP bit in the C1 control register is set to one to enable the ARMv6 format Page Tables
See page 6-39 of the ARM1176JZF-S Technical Reference Manual
Level One Page Table contains 4096 32bit (4 byte) entries for a total size of 16KB

`ARMV6_L1D_TYPE_COARSE = 1;`	The entry points to a 1MB second-level page table. See page 6-40.
`ARMV6_L1D_TYPE_SECTION = 2;`	The entry points to a either a 1MB Section of memory or a 16MB Supersection of memory
`ARMV6_L1D_TYPE_SUPERSECTION = 2;`	Bit[18] of the descriptor selects between a Section and a Supersection

Difference between revisions of "Unit PlatformARMv6"

Latest revision as of 01:35, 22 April 2022

Contents

Description

Constants

Type definitions

Public variables

Function declarations

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 4: / Line 4: @@
 === Description ===
 ----
+'''Ultibo Platform Interface unit for ARMv6'''
 The ARMv6 (ARM11) does not support WFI, WFE, DMB, DSB or ISB instructions, these must be done using MCR operations on the system control processor registers.
@@ Line 12: / Line 14: @@
 ----
-''To be documented''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 page tables shift''' <code> ARMV6_PAGE_TABLES_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>ARMV6_PAGE_TABLES_SHIFT = 10;</code>
+| style="width: 50%;"|&nbsp;
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 CP15 C0 main Id''' <code> ARMV6_CP15_C0_MAINID_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>ARMV6_CP15_C0_MAINID_IMPLEMENTOR_MASK = ($FF shl 24);</code>
+| style="width: 50%;"|&nbsp;
+|-
+| <code>ARMV6_CP15_C0_MAINID_VARIANT_MASK = ($F shl 20);</code>
+| &nbsp;
+|-
+| <code>ARMV6_CP15_C0_MAINID_ARCHITECTURE_MASK = ($F shl 16);</code>
+| &nbsp;
+|-
+| <code>ARMV6_CP15_C0_MAINID_PARTNUMBER_MASK = ($FFF shl 4);</code>
+| &nbsp;
+|-
+| <code>ARMV6_CP15_C0_MAINID_REVISION_MASK = ($F shl 0);</code>
+| &nbsp;
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C0_MAINID_IMPLEMENTOR_ARM = ($41 shl 24);</code>
+| &nbsp;
+|-
+| <code>ARMV6_CP15_C0_MAINID_ARCHITECTURE_CPUID = ($F shl 16);</code>
+| &nbsp;
+|-
+| <code>ARMV6_CP15_C0_MAINID_PARTNUMBER_1176JZSF = ($B76 shl 4);</code>
+| &nbsp;
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 CP15 C0 cache type''' <code> ARMV6_CP15_C0_CTR_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>ARMV6_CP15_C0_CTR_CTYPE_MASK = ($F shl 25);</code>
+| The Cache type bits provide information about the cache architecture (b1110 in the ARM1176JZF-S processor)
+|-
+| <code>ARMV6_CP15_C0_CTR_S = (1 shl 24);</code>
+| S = 1, indicates that the processor has separate instruction and data caches and not a unified cache
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C0_CTR_DP = (1 shl 23);</code>
+| The P, Page, bit indicates restrictions on page allocation for bits [13:12] of the VA For ARM1176JZF-S processors, the P bit is set if the cache size is greater than 16KB.
+|-
+| <code>ARMV6_CP15_C0_CTR_DSIZE_MASK = ($F shl 18);</code>
+| The Size field indicates the cache size in conjunction with the M bit
+|-
+| <code>ARMV6_CP15_C0_CTR_DSIZE_128K = (8 shl 18);</code>
+| 128KB cache, not supported
+|-
+| <code>ARMV6_CP15_C0_CTR_DSIZE_64K = (7 shl 18);</code>
+| 64KB cache
+|-
+| <code>ARMV6_CP15_C0_CTR_DSIZE_32K = (6 shl 18);</code>
+| 32KB cache
+|-
+| <code>ARMV6_CP15_C0_CTR_DSIZE_16K = (5 shl 18);</code>
+| 16KB cache
+|-
+| <code>ARMV6_CP15_C0_CTR_DSIZE_8K = (4 shl 18);</code>
+| 8KB cache
+|-
+| <code>ARMV6_CP15_C0_CTR_DSIZE_4K = (3 shl 18);</code>
+| 4KB cache
+|-
+| <code>ARMV6_CP15_C0_CTR_DSIZE_2K = (2 shl 18);</code>
+| 2KB cache, not supported
+|-
+| <code>ARMV6_CP15_C0_CTR_DSIZE_1K = (1 shl 18);</code>
+| 1KB cache, not supported
+|-
+| <code>ARMV6_CP15_C0_CTR_DSIZE_05K = (0 shl 18);</code>
+| 0.5KB cache, not supported
+|-
+| <code>ARMV6_CP15_C0_CTR_DASSOC_MASK = (7 shl 15);</code>
+| b010, indicates that the ARM1176JZF-S processor has 4-way associativity
+|-
+| <code>ARMV6_CP15_C0_CTR_DM = (1 shl 14);</code>
+| Indicates the cache size and cache associativity values in conjunction with the Size and Assoc fields (In the ARM1176JZF-S processor the M bit is set to 0).
+|-
+| <code>ARMV6_CP15_C0_CTR_DLEN_MASK = (3 shl 12);</code>
+| b10, indicates that ARM1176JZF-S processor has a cache line length of 8 words, that is 32 byte.
+|-
+| <code>ARMV6_CP15_C0_CTR_DLEN_32 = (2 shl 12);</code>
+| &nbsp;
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C0_CTR_IP = (1 shl 11);</code>
+| The P, Page, bit indicates restrictions on page allocation for bits [13:12] of the VA For ARM1176JZF-S processors, the P bit is set if the cache size is greater than 16KB.
+|-
+| <code>ARMV6_CP15_C0_CTR_ISIZE_MASK = ($F shl 6);</code>
+| The Size field indicates the cache size in conjunction with the M bit
+|-
+| <code>ARMV6_CP15_C0_CTR_ISIZE_128K = (8 shl 6);</code>
+| 128KB cache, not supported
+|-
+| <code>ARMV6_CP15_C0_CTR_ISIZE_64K = (7 shl 6);</code>
+| 64KB cache
+|-
+| <code>ARMV6_CP15_C0_CTR_ISIZE_32K = (6 shl 6);</code>
+| 32KB cache
+|-
+| <code>ARMV6_CP15_C0_CTR_ISIZE_16K = (5 shl 6);</code>
+| 16KB cache
+|-
+| <code>ARMV6_CP15_C0_CTR_ISIZE_8K = (4 shl 6);</code>
+| 8KB cache
+|-
+| <code>ARMV6_CP15_C0_CTR_ISIZE_4K = (3 shl 6);</code>
+| 4KB cache
+|-
+| <code>ARMV6_CP15_C0_CTR_ISIZE_2K = (2 shl 6);</code>
+| 2KB cache, not supported
+|-
+| <code>ARMV6_CP15_C0_CTR_ISIZE_1K = (1 shl 6);</code>
+| 1KB cache, not supported
+|-
+| <code>ARMV6_CP15_C0_CTR_ISIZE_05K = (0 shl 6);</code>
+| 0.5KB cache, not supported
+|-
+| <code>ARMV6_CP15_C0_CTR_IASSOC_MASK = (7 shl 3);</code>
+| b010, indicates that the ARM1176JZF-S processor has 4-way associativity
+|-
+| <code>ARMV6_CP15_C0_CTR_IM = (1 shl 2);</code>
+| Indicates the cache size and cache associativity values in conjunction with the Size and Assoc fields (In the ARM1176JZF-S processor the M bit is set to 0).
+|-
+| <code>ARMV6_CP15_C0_CTR_ILEN_MASK = (3 shl 0);</code>
+| b10, indicates that ARM1176JZF-S processor has a cache line length of 8 words, that is 32 bytes.
+|-
+| <code>ARMV6_CP15_C0_CTR_ILEN_32 = (2 shl 0);</code>
+| &nbsp;
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 CP15 C1 control''' <code> ARMV6_CP15_C1_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>ARMV6_CP15_C1_FA_BIT = (1 shl 29);</code>
+| Force AP functionality in the MMU is enabled when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_TR_BIT = (1 shl 28);</code>
+| TEX remap enabled when set to 1 (TEX[2:1] become page table bits for OS) (Default 0)
+|-
+| <code>ARMV6_CP15_C1_EE_BIT = (1 shl 25);</code>
+| CPSR E bit is set to 1 on an exception when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_VE_BIT = (1 shl 24);</code>
+| Interrupt vectors are defined by the VIC interface when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_XP_BIT = (1 shl 23);</code>
+| Subpage AP bits disabled when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_U_BIT = (1 shl 22);</code>
+| Unaligned data access support enabled when set to 1 (Default 0). The processor permits unaligned loads and stores and support for mixed endian data is enabled.
+|-
+| <code>ARMV6_CP15_C1_FI_BIT = (1 shl 21);</code>
+| Low interrupt latency configuration enabled when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_L4_BIT = (1 shl 15);</code>
+| Loads to PC do not set the T bit when set to 1 (ARMv4 behavior) (Default 0)
+|-
+| <code>ARMV6_CP15_C1_RR_BIT = (1 shl 14);</code>
+| Predictable cache replacement strategy by round-robin replacement when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_V_BIT = (1 shl 13);</code>
+| High exception vectors selected when set to 1, address range = 0xFFFF0000-0xFFFF001C (Default 0)
+|-
+| <code>ARMV6_CP15_C1_I_BIT = (1 shl 12);</code>
+| L1 Instruction Cache enabled when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_Z_BIT = (1 shl 11);</code>
+| Branch prediction enabled when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_B_BIT = (1 shl 7);</code>
+| Big-endian word-invariant memory system when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_C_BIT = (1 shl 2);</code>
+| L1 Data cache enabled when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_A_BIT = (1 shl 1);</code>
+| Strict alignment fault checking enabled when set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C1_M_BIT = (1 shl 0);</code>
+| MMU enabled when set to 1 (Default 0)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 CP15 C1 auxiliary control''' <code> ARMV6_CP15_C1_AUX_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>ARMV6_CP15_C1_AUX_CZ = (1  shl 6);</code>
+| Controls the restriction of cache size to 16KB
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 CP15 C1 coprocessor access control''' <code> ARMV6_CP15_C1_CP* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>ARMV6_CP15_C1_CP0_NONE = (0 shl 0);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP0_SYS = (1 shl 0);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP0_USER = (3 shl 0);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP1_NONE = (0 shl 2);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP1_SYS = (1 shl 2);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP1_USER = (3 shl 2);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP2_NONE = (0 shl 4);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP2_SYS = (1 shl 4);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP2_USER = (3 shl 4);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP3_NONE = (0 shl 6);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP3_SYS = (1 shl 6);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP3_USER = (3 shl 6);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP4_NONE = (0 shl 8);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP4_SYS = (1 shl 8);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP4_USER = (3 shl 8);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP5_NONE = (0 shl 10);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP5_SYS = (1 shl 10);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP5_USER = (3 shl 10);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP6_NONE = (0 shl 12);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP6_SYS = (1 shl 12);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP6_USER = (3 shl 12);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP7_NONE = (0 shl 14);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP7_SYS = (1 shl 14);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP7_USER = (3 shl 14);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP8_NONE = (0 shl 16);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP8_SYS = (1 shl 16);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP8_USER = (3 shl 16);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP9_NONE = (0 shl 18);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP9_SYS  = (1 shl 18);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP9_USER = (3 shl 18);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP10_NONE = (0 shl 20);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP10_SYS = (1 shl 20);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP10_USER = (3 shl 20);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP11_NONE = (0 shl 22);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP11_SYS = (1 shl 22);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP11_USER = (3 shl 22);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP12_NONE = (0 shl 24);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP12_SYS = (1 shl 24);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP12_USER = (3 shl 24);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C1_CP13_NONE = (0 shl 26);</code>
+| Access denied (Default)
+|-
+| <code>ARMV6_CP15_C1_CP13_SYS = (1 shl 26);</code>
+| Privileged mode access only
+|-
+| <code>ARMV6_CP15_C1_CP13_USER = (3 shl 26);</code>
+| Privileged and User mode access
+|-
+|colspan="2"|''Coprocessors CP14 (Debug Control) and CP15 (System Control) are not affected by the Coprocessor Access Control Register''
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 CP15 C2 translation table base''' <code> ARMV6_CP15_C2_TTBR_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>ARMV6_CP15_C2_TTBR_BASE_MASK = $FFFFC000;</code>
+| &nbsp;
+|-
+| <code>ARMV6_CP15_C2_TTBR_RGN_OUTER_NONCACHED = (0 shl 3);</code>
+| Outer Noncacheable (Default)
+|-
+| <code>ARMV6_CP15_C2_TTBR_RGN_OUTER_WRITE_ALLOCATE = (1 shl 3);</code>
+| Outer Write-back, Write Allocate
+|-
+| <code>ARMV6_CP15_C2_TTBR_RGN_OUTER_WRITE_THROUGH = (2 shl 3);</code>
+| Outer Write-through, No Allocate on Write
+|-
+| <code>ARMV6_CP15_C2_TTBR_RGN_OUTER_WRITE_BACK = (3 shl 3);</code>
+| Outer Write-back, No Allocate on Write
+|-
+| <code>ARMV6_CP15_C2_TTBR_P = (1 shl 2);</code>
+| If the processor supports ECC, it indicates to the memory controller it is enabled or disabled. For ARM1176JZF-S processors this is 0.
+|-
+| <code>ARMV6_CP15_C2_TTBR_S = (1 shl 1);</code>
+| Indicates the page table walk is to Shared memory if set to 1 (Default 0)
+|-
+| <code>ARMV6_CP15_C2_TTBR_C_INNER_CACHED = (1 shl 0);</code>
+| Indicates the page table walk is Inner Cacheable if set to 1 (Default 0)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 CP15 C3 domain access control''' <code> ARMV6_CP15_C3_DOMAIN* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>ARMV6_CP15_C3_DOMAIN0_NONE = (0 shl 0);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN0_CLIENT = (1 shl 0);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN0_MANAGER = (3 shl 0);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN1_NONE = (0 shl 2);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN1_CLIENT = (1 shl 2);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN1_MANAGER = (3 shl 2);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN2_NONE = (0 shl 4);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN2_CLIENT = (1 shl 4);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN2_MANAGER = (3 shl 4);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN3_NONE = (0 shl 6);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN3_CLIENT = (1 shl 6);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN3_MANAGER = (3 shl 6);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN4_NONE = (0 shl 8);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN4_CLIENT = (1 shl 8);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN4_MANAGER = (3 shl 8);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN5_NONE = (0 shl 10);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN5_CLIENT = (1 shl 10);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN5_MANAGER = (3 shl 10);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN6_NONE = (0 shl 12);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN6_CLIENT = (1 shl 12);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN6_MANAGER = (3 shl 12);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN7_NONE = (0 shl 14);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN7_CLIENT = (1 shl 14);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN7_MANAGER = (3 shl 14);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN8_NONE = (0 shl 16);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN8_CLIENT = (1 shl 16);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN8_MANAGER = (3 shl 16);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN9_NONE = (0 shl 18);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN9_CLIENT = (1 shl 18);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN9_MANAGER = (3 shl 18);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN10_NONE = (0 shl 20);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN10_CLIENT = (1 shl 20);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN10_MANAGER = (3 shl 20);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN11_NONE = (0 shl 22);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN11_CLIENT = (1 shl 22);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN11_MANAGER = (3 shl 22);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN12_NONE = (0 shl 24);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN12_CLIENT = (1 shl 24);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN12_MANAGER = (3 shl 24);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN13_NONE = (0 shl 26);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN13_CLIENT = (1 shl 26);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN13_MANAGER = (3 shl 26);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN14_NONE = (0 shl 28);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN14_CLIENT = (1 shl 28);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN14_MANAGER = (3 shl 28);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_CP15_C3_DOMAIN15_NONE = (0 shl 30);</code>
+| No access, Any access generates a domain fault (Default)
+|-
+| <code>ARMV6_CP15_C3_DOMAIN15_CLIENT = (1 shl 30);</code>
+| Client, Accesses are checked against the access permission bits in the TLB entry
+|-
+| <code>ARMV6_CP15_C3_DOMAIN15_MANAGER = (3 shl 30);</code>
+| Manager, Accesses are not checked against the access permission bits in the TLB entry, so a permission fault cannot be generated
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 floating-point exception''' <code> ARMV6_FPEXC_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>ARMV6_FPEXC_EN = (1 shl 30);</code>
+| Floating-point system is enabled and operates normally if set to 1 (Default 0)
+|-
+| <code>ARMV6_FPEXC_EX = (1 shl 31);</code>
+| If EX is set to 0 then only FPSCR and FPEXC need to be preseved on a context switch (Default 0)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level one descriptor type''' <code> ARMV6_L1D_TYPE_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-36 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|These formats assume that the XP bit in the C1 control register is set to one to enable the ARMv6 format Page Tables
+|-
+|colspan="2"|See page 6-39 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|Level One Page Table contains 4096 32bit (4 byte) entries for a total size of 16KB
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L1D_TYPE_COARSE = 1;</code>
+| The entry points to a 1MB second-level page table. See page 6-40.
+|-
+| <code>ARMV6_L1D_TYPE_SECTION = 2;</code>
+| The entry points to a either a 1MB Section of memory or a 16MB Supersection of memory
+|-
+| <code>ARMV6_L1D_TYPE_SUPERSECTION = 2;</code>
+| Bit[18] of the descriptor selects between a Section and a Supersection
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level one descriptor flag''' <code> ARMV6_L1D_FLAG_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-39 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L1D_FLAG_COARSE_NS = (1 shl 3);</code>
+| NS (Non Secure) Attribute bit to enable the support of TrustZone
+|-
+| <code>ARMV6_L1D_FLAG_SECTION_NS = (1 shl 19);</code>
+| NS (Non Secure) Attribute bit to enable the support of TrustZone
+|-
+| <code>ARMV6_L1D_FLAG_SUPERSECTION = (1 shl 18);</code>
+| The descriptor is a 16MB Supersection instead of a 1MB Section (Section Only)
+|-
+| <code>ARMV6_L1D_FLAG_NOT_GLOBAL = (1 shl 17);</code>
+| The Not-Global (nG) bit, determines if the translation is marked as global (0), or process-specific (1) (Section Only)
+|-
+| <code>ARMV6_L1D_FLAG_SHARED = (1 shl 16);</code>
+| The Shared (S) bit, determines if the translation is for Non-Shared (0), or Shared (1) memory. This only applies to Normal memory regions.
+Device memory can be Shared or Non-Shared as determined by the TEX bits and the C and B bits (Section Only).
+|-
+| <code>ARMV6_L1D_FLAG_APX = (1 shl 15);</code>
+| The access permissions extension (APX) bit, provides an extra access permission bit (Section Only)
+|-
+| <code>ARMV6_L1D_FLAG_P = (1 shl 9);</code>
+| If the P bit is supported and set for the memory region, it indicates to the system memory controller that this memory region has ECC enabled. ARM1176JZF-S processors do not support the P bit.
+|-
+| <code>ARMV6_L1D_FLAG_XN = (1 shl 4);</code>
+| The Execute-Never (XN) bit, determines if the region is Executable (0) or Not-executable(1) (Section Only)
+|-
+| <code>ARMV6_L1D_FLAG_C = (1 shl 3);</code>
+| Cacheable (C) bit (Section Only)
+|-
+| <code>ARMV6_L1D_FLAG_B = (1 shl 2);</code>
+| Bufferable (B) bit (Section Only)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level one descriptor mask''' <code> ARMV6_L1D_*_MASK </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-39 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L1D_COARSE_BASE_MASK = $FFFFFC00;</code>
+| &nbsp;
+|-
+| <code>ARMV6_L1D_SECTION_BASE_MASK = $FFF00000;</code>
+| &nbsp;
+|-
+| <code>ARMV6_L1D_SUPERSECTION_BASE_MASK = $FF000000;</code>
+| &nbsp;
+|-
+| <code>ARMV6_L1D_DOMAIN_MASK = ($F shl 5);</code>
+| Security Domain of the Descriptor
+|-
+| <code>ARMV6_L1D_TEX_MASK = (7 shl 12);</code>
+| Type extension field bits (Section Only)
+|-
+| <code>ARMV6_L1D_AP_MASK = (3 shl 10);</code>
+| Access permission bits (Section Only)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level one descriptor TEX value''' <code> ARMV6_L1D_TEX* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-15 of the ARM1176JZF-S Technical Reference Manual (Section Only)
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L1D_TEX0 = (0 shl 12);</code>
+| &nbsp;
+|-
+| <code>ARMV6_L1D_TEX1 = (1 shl 12);</code>
+| &nbsp;
+|-
+| <code>ARMV6_L1D_TEX2 = (2 shl 12);</code>
+| &nbsp;
+|-
+| <code>ARMV6_L1D_TEX4 = (4 shl 12);</code>
+| Only used for Cacheable memory values
+|-
+| <code>ARMV6_L1D_TEX5 = (5 shl 12);</code>
+| Only used for Cacheable memory values
+|-
+| <code>ARMV6_L1D_TEX6 = (6 shl 12);</code>
+| Only used for Cacheable memory values
+|-
+| <code>ARMV6_L1D_TEX7 = (7 shl 12);</code>
+| Only used for Cacheable memory values
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level one descriptor AP value''' <code> ARMV6_L1D_AP* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-12 of the ARM1176JZF-S Technical Reference Manual (Section Only)
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L1D_AP0 = (0 shl 10);</code>
+| style="width: 50%;"|&nbsp;
+|-
+| <code>ARMV6_L1D_AP1 = (1 shl 10); </code>
+| &nbsp;
+|-
+| <code>ARMV6_L1D_AP2 = (2 shl 10); </code>
+| &nbsp;
+|-
+| <code>ARMV6_L1D_AP3 = (3 shl 10);</code>
+| &nbsp;
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level one descriptor permission value''' <code> ARMV6_L1D_ACCESS_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-12 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|This is not the full set of permissions as Ultibo always runs in priviledged mode
+|-
+|colspan="2"|The XN bit can also be applied to control whether memory regions are executable or not
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L1D_ACCESS_NONE = ARMV6_L1D_AP0;</code>
+| No Access for both Privileged and Unprivileged code
+|-
+| <code>ARMV6_L1D_ACCESS_READONLY = ARMV6_L1D_FLAG_APX or ARMV6_L1D_AP3;</code>
+| Read-Only for both Privileged and Unprivileged code
+|-
+| <code>ARMV6_L1D_ACCESS_READWRITE = ARMV6_L1D_AP3;</code>
+| Read-Write for both Privileged and Unprivileged code
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level one descriptor cache value''' <code> ARMV6_L1D_CACHE_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-15 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L1D_CACHE_STRONGLY_ORDERED = ARMV6_L1D_TEX0;</code>
+| Strongly Ordered. (Always Shared)
+|-
+| <code>ARMV6_L1D_CACHE_SHARED_DEVICE = ARMV6_L1D_TEX0 or ARMV6_L1D_FLAG_B;</code>
+| Device. (Always Shared)
+|-
+| <code>ARMV6_L1D_CACHE_NORMAL_WRITE_THROUGH = ARMV6_L1D_TEX0 or ARMV6_L1D_FLAG_C;</code>
+| Normal. Write Through (Shared if S bit set)
+|-
+| <code>ARMV6_L1D_CACHE_NORMAL_WRITE_BACK = ARMV6_L1D_TEX0 or ARMV6_L1D_FLAG_C or ARMV6_L1D_FLAG_B;</code>
+| Normal. Write Back (Shared if S bit set)
+|-
+| <code>ARMV6_L1D_CACHE_NORMAL_NONCACHED = ARMV6_L1D_TEX1;</code>
+| Normal. Noncacheable (Shared if S bit set)
+|-
+| <code>ARMV6_L1D_CACHE_NONSHARED_DEVICE = ARMV6_L1D_TEX2;</code>
+| Device. (Not Shared)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level two descriptor type''' <code> ARMV6_L2D_TYPE_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-40 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|Level Two Page Table contains 256 32bit (4 byte) entries for a total size of 1KB
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L2D_TYPE_LARGE = 1;</code>
+| The entry points to a 64KB Large page in memory
+|-
+| <code>ARMV6_L2D_TYPE_SMALL = 2;</code>
+| The entry points to a 4KB Extended small page in memory. Bit[0] of the entry is the XN (Execute Never) bit for the entry.
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level two descriptor flag''' <code> ARMV6_L2D_FLAG_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-40 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L2D_FLAG_LARGE_XN = (1 shl 15);</code>
+| The Execute-Never (XN) bit, determines if the region is Executable (0) or Not-executable(1)
+|-
+| <code>ARMV6_L2D_FLAG_SMALL_XN = (1 shl 0);</code>
+| The Execute-Never (XN) bit, determines if the region is Executable (0) or Not-executable(1)
+|-
+| <code>ARMV6_L2D_FLAG_NOT_GLOBAL = (1 shl 11);</code>
+| The Not-Global (nG) bit, determines if the translation is marked as global (0), or process-specific (1)
+|-
+| <code>ARMV6_L2D_FLAG_SHARED = (1 shl 10);</code>
+| The Shared (S) bit, determines if the translation is for Non-Shared (0), or Shared (1) memory. This only applies to Normal memory regions.
+Device memory can be Shared or Non-Shared as determined by the TEX bits and the C and B bits
+|-
+| <code>ARMV6_L2D_FLAG_APX = (1 shl 9);</code>
+| The access permissions extension (APX) bit, provides an extra access permission bit.
+|-
+| <code>ARMV6_L2D_FLAG_C = (1 shl 3);</code>
+| Cacheable (C) bit
+|-
+| <code>ARMV6_L2D_FLAG_B = (1 shl 2);</code>
+| Bufferable (B) bit
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level two descriptor mask''' <code> ARMV6_L2D_*_MASK </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-40 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L2D_LARGE_BASE_MASK = $FFFF0000;</code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_SMALL_BASE_MASK = $FFFFF000;</code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_LARGE_TEX_MASK = (7 shl 12);</code>
+| Type extension field bits
+|-
+| <code>ARMV6_L2D_SMALL_TEX_MASK = (7 shl 6);</code>
+| Type extension field bits
+|-
+| <code>ARMV6_L2D_AP_MASK = (3 shl 4);</code>
+| Access permission bits
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level two descriptor large TEX value''' <code> ARMV6_L2D_LARGE_TEX* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-15 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L2D_LARGE_TEX0 = (0 shl 12);</code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_LARGE_TEX1 = (1 shl 12);</code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_LARGE_TEX2 = (2 shl 12);</code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_LARGE_TEX4 = (4 shl 12);</code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_LARGE_TEX5 = (5 shl 12);</code>
+| Only used for Cacheable memory values
+|-
+| <code>ARMV6_L2D_LARGE_TEX6 = (6 shl 12);</code>
+| Only used for Cacheable memory values
+|-
+| <code>ARMV6_L2D_LARGE_TEX7 = (7 shl 12);</code>
+| Only used for Cacheable memory values
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level two descriptor small TEX value''' <code> ARMV6_L2D_SMALL_TEX* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-15 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L2D_SMALL_TEX0 = (0 shl 6);</code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_SMALL_TEX1 = (1 shl 6); </code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_SMALL_TEX2 = (2 shl 6);</code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_SMALL_TEX4 = (4 shl 6); </code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_SMALL_TEX5 = (5 shl 6);</code>
+| Only used for Cacheable memory values
+|-
+| <code>ARMV6_L2D_SMALL_TEX6 = (6 shl 6);</code>
+| Only used for Cacheable memory values
+|-
+| <code>ARMV6_L2D_SMALL_TEX7 = (7 shl 6);</code>
+| Only used for Cacheable memory values
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level two descriptor AP value''' <code> ARMV6_L2D_AP* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-12 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L2D_AP0 = (0 shl 4);</code>
+| style="width: 50%;"|&nbsp;
+|-
+| <code>ARMV6_L2D_AP1 = (1 shl 4); </code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_AP2 = (2 shl 4); </code>
+| &nbsp;
+|-
+| <code>ARMV6_L2D_AP3 = (3 shl 4);</code>
+| &nbsp;
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level two descriptor permission value''' <code> ARMV6_L2D_ACCESS_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-12 of the ARM1176JZF-S Technical Reference Manual)
+|-
+|colspan="2"|This is not the full set of permissions as Ultibo always runs in priviledged mode
+|-
+|colspan="2"|The XN bit can also be applied to control whether memory regions are executable or not
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L2D_ACCESS_NONE = ARMV6_L2D_AP0;</code>
+| No Access for both Privileged and Unprivileged code
+|-
+| <code>ARMV6_L2D_ACCESS_READONLY = ARMV6_L2D_FLAG_APX or ARMV6_L2D_AP3;</code>
+| Read-Only for both Privileged and Unprivileged code
+|-
+| <code>ARMV6_L2D_ACCESS_READWRITE = ARMV6_L2D_AP3;</code>
+| Read-Write for both Privileged and Unprivileged code
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level two descriptor large cache value''' <code> ARMV6_L2D_LARGE_CACHE_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-15 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L2D_LARGE_CACHE_STRONGLY_ORDERED = ARMV6_L2D_LARGE_TEX0;</code>
+| Strongly Ordered. (Always Shared)
+|-
+| <code>ARMV6_L2D_LARGE_CACHE_SHARED_DEVICE = ARMV6_L2D_LARGE_TEX0 or ARMV6_L2D_FLAG_B;</code>
+| Device. (Always Shared)
+|-
+| <code>ARMV6_L2D_LARGE_CACHE_NORMAL_WRITE_THROUGH = ARMV6_L2D_LARGE_TEX0 or ARMV6_L2D_FLAG_C;</code>
+| Normal. Write Through (Shared if S bit set)
+|-
+| <code>ARMV6_L2D_LARGE_CACHE_NORMAL_WRITE_BACK = ARMV6_L2D_LARGE_TEX0 or ARMV6_L2D_FLAG_C or ARMV6_L2D_FLAG_B;</code>
+| Normal. Write Back (Shared if S bit set)
+|-
+| <code>ARMV6_L2D_LARGE_CACHE_NORMAL_NONCACHED = ARMV6_L2D_LARGE_TEX1;</code>
+| Normal. Noncacheable (Shared if S bit set)
+|-
+| <code>ARMV6_L2D_LARGE_CACHE_NONSHARED_DEVICE = ARMV6_L2D_LARGE_TEX2;</code>
+| Device. (Not Shared)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 level two descriptor small cache value''' <code> ARMV6_L2D_SMALL_CACHE_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|See page 6-15 of the ARM1176JZF-S Technical Reference Manual
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>ARMV6_L2D_SMALL_CACHE_STRONGLY_ORDERED = ARMV6_L2D_SMALL_TEX0;</code>
+| Strongly Ordered. (Always Shared)
+|-
+| <code>ARMV6_L2D_SMALL_CACHE_SHARED_DEVICE = ARMV6_L2D_SMALL_TEX0 or ARMV6_L2D_FLAG_B;</code>
+| Device. (Always Shared)
+|-
+| <code>ARMV6_L2D_SMALL_CACHE_NORMAL_WRITE_THROUGH = ARMV6_L2D_SMALL_TEX0 or ARMV6_L2D_FLAG_C;</code>
+| Normal. Write Through (Shared if S bit set)
+|-
+| <code>ARMV6_L2D_SMALL_CACHE_NORMAL_WRITE_BACK = ARMV6_L2D_SMALL_TEX0 or ARMV6_L2D_FLAG_C or ARMV6_L2D_FLAG_B;</code>
+| Normal. Write Back (Shared if S bit set)
+|-
+| <code>ARMV6_L2D_SMALL_CACHE_NORMAL_NONCACHED = ARMV6_L2D_SMALL_TEX1;</code>
+| Normal. Noncacheable (Shared if S bit set)
+|-
+| <code>ARMV6_L2D_SMALL_CACHE_NONSHARED_DEVICE = ARMV6_L2D_SMALL_TEX2;</code>
+| Device. (Not Shared)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''ARMv6 specific constants''' <code> ARMV6_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>ARMV6_CONTEXT_LENGTH = 50;</code>
+| Length of ARM context switch record in 32 bit words (includes fpexc, fpscr, d0-d15, r0-r12, lr, pc, cpsr)
+|-
+|}
+</div></div>
+<br />
 === Type definitions ===
 ----
-''To be documented''
+'''ARMv6 page table initialization'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TARMv6PageTableInit = procedure;</code>
+| style="width: 40%;"|
+|-
+|}
+'''ARMv6 dispatch IRQ'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TARMv6DispatchIRQ = function(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;</code>
+| style="width: 40%;"|
+|-
+|}
+'''ARMv6 dispatch FIQ'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TARMv6DispatchFIQ = function(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;</code>
+| style="width: 40%;"|
+|-
+|}
+'''ARMv6 dispatch SWI'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TARMv6DispatchSWI = function(CPUID:LongWord; Thread:TThreadHandle; Request:PSystemCallRequest):TThreadHandle;</code>
+| style="width: 40%;"|
+|-
+|}
+<br />
 === Public variables ===
 ----
-''To be documented''
+'''ARMv6 specific variables'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>ARMv6Initialized:Boolean;</code>
+| style="width: 40%;"|
+|-
+|}
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>ARMv6DummySTREX:LongWord;</code>
+| style="width: 40%;"|Variable to allow a dummy STREX operation to be performed after each context switch as required by ARM documentation
+|-
+|}
+'''Page table handlers'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>ARMv6PageTableInitHandler:TARMv6PageTableInit;</code>
+| style="width: 40%;"|
+|-
+|}
+'''IRQ handlers'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>ARMv6DispatchIRQHandler:TARMv6DispatchIRQ;</code>
+| style="width: 40%;"|
+|-
+|}
+'''FIQ handlers'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>ARMv6DispatchFIQHandler:TARMv6DispatchFIQ;</code>
+| style="width: 40%;"|
+|-
+|}
+'''SWI handlers'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>ARMv6DispatchSWIHandler:TARMv6DispatchSWI;</code>
+| style="width: 40%;"|
+|-
+|}
+<br />
 === Function declarations ===
@@ Line 36: / Line 1,214: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 51: / Line 1,229: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 63: / Line 1,241: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 75: / Line 1,253: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 87: / Line 1,265: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 99: / Line 1,277: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 6-36 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 111: / Line 1,289: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 123: / Line 1,301: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 135: / Line 1,313: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 147: / Line 1,325: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 159: / Line 1,337: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 171: / Line 1,349: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 183: / Line 1,361: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 195: / Line 1,373: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 207: / Line 1,385: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 219: / Line 1,397: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 231: / Line 1,409: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 243: / Line 1,421: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 255: / Line 1,433: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 262: / Line 1,440: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">procedure ARMv6Halt; assembler; nostackframe; public name'_haltproc';</pre>
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6Halt; assembler; nostackframe; public name '_haltproc';</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' The purpose of the Wait For Interrupt operation is to put the processor in to a low power state</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See Standby mode on page 10-3 of the ARM1176JZF-S Revision: r0p7 Technical Reference Manual
 |-
@@ Line 279: / Line 1,457: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See Standby mode on page 10-3 of the ARM1176JZF-S Revision: r0p7 Technical Reference Manual
 |-
@@ Line 291: / Line 1,469: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 303: / Line 1,481: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See Standby mode on page 10-3 of the ARM1176JZF-S Revision: r0p7 Technical Reference Manual
 |-
@@ Line 315: / Line 1,493: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-74 of the ARM1176JZF-S Technical Reference Manual
 Note that this is also available in the FPC RTL as ReadBarrier/WriteBarrier See: \source\rtl\arm\arm.inc
-<br />Implementation is exactly the same for either.
+<br />Implementation is exactly the same for either
 |-
 |}
@@ Line 329: / Line 1,507: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-74 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 341: / Line 1,519: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | The ARM1176JZF-S Technical Reference Manual states on page 5-10 (section 5.5) that a Flush Prefetch Buffer operation also acts as an IMB
 See page 3-79 of the ARM1176JZF-S Technical Reference Manual
@@ Line 354: / Line 1,532: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-86 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 366: / Line 1,544: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-86 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 378: / Line 1,556: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-86 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 390: / Line 1,568: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-74 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 402: / Line 1,580: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-74 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 414: / Line 1,592: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-74 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 426: / Line 1,604: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-74 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 438: / Line 1,616: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-74 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 445: / Line 1,623: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">procedure ARMv6CleanDataCacheRange(Address,Size:LongWord); assembler; nostackframe;</pre>
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6CleanDataCacheRangeInternal(Address:PtrUInt; Size:LongWord); assembler; nostackframe;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' Perform a clean data cache range operation</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| See page 3-71 / 3-76 of the ARM1176JZF-S Technical Reference Manual
+| See page 3-71/3-76 of the ARM1176JZF-S Technical Reference Manual
 |-
 |}
@@ Line 457: / Line 1,635: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">procedure ARMv6InvalidateDataCacheRange(Address,Size:LongWord); assembler; nostackframe;</pre>
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6CleanDataCacheRange(Address:PtrUInt; Size:LongWord);</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Perform a clean data cache range, limiting the size for each operation to 4MB because some processors fail to correctly operate with larger ranges</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 3-71/3-76 of the ARM1176JZF-S Technical Reference Manual
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6InvalidateDataCacheRangeInternal(Address:PtrUInt; Size:LongWord); assembler; nostackframe;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' Perform an invalidate data cache range operation</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| See page 3-71 / 3-76 of the ARM1176JZF-S Technical Reference Manual
+| See page 3-71/3-76 of the ARM1176JZF-S Technical Reference Manual
 |-
 |}
@@ Line 469: / Line 1,659: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">procedure ARMv6CleanAndInvalidateDataCacheRange(Address,Size:LongWord); assembler; nostackframe;</pre>
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6InvalidateDataCacheRange(Address:PtrUInt; Size:LongWord);</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Perform an invalidate data cache range, limiting the size for each operation to 4MB because some processors fail to correctly operate with larger ranges</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 3-71/3-76 of the ARM1176JZF-S Technical Reference Manual
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6CleanAndInvalidateDataCacheRangeInternal(Address:PtrUInt; Size:LongWord); assembler; nostackframe;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' Perform a clean and invalidate data cache range operation</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| See page 3-71 / 3-76 of the ARM1176JZF-S Technical Reference Manual
+| See page 3-71/3-76 of the ARM1176JZF-S Technical Reference Manual
 |-
 |}
@@ Line 481: / Line 1,683: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">procedure ARMv6InvalidateInstructionCacheRange(Address,Size:LongWord); assembler; nostackframe;</pre>
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6CleanAndInvalidateDataCacheRange(Address:PtrUInt; Size:LongWord);</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Perform a clean and invalidate data cache range, limiting the size for each operation to 4MB because some processors fail to correctly operate with larger ranges</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 3-71/3-76 of the ARM1176JZF-S Technical Reference Manual
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6InvalidateInstructionCacheRangeInternal(Address:PtrUInt; Size:LongWord); assembler; nostackframe;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' Perform an invalidate instruction cache range operation</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| See page 3-71 / 3-76 of the ARM1176JZF-S Technical Reference Manual
+| See page 3-71/3-76 of the ARM1176JZF-S Technical Reference Manual
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6InvalidateInstructionCacheRange(Address:PtrUInt; Size:LongWord);</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Perform an invalidate instruction cache range operation, limiting the size for each operation to 4MB because some processors fail to correctly operate with larger ranges</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 3-71/3-76 of the ARM1176JZF-S Technical Reference Manual
 |-
 |}
@@ Line 498: / Line 1,724: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-79 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 510: / Line 1,736: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-79 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 522: / Line 1,748: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''OldStack'''
+! OldStack
 | The address to save the stack pointer to for the current thread (Passed in r0)
 |-
-! '''NewThread'''
+! NewThread
 | The address to restore the stack pointer from for the new thread (Passed in r1)
 |-
-! '''NewThread'''
+! NewThread
 | The handle of the new thread to switch to (Passed in r2)
 |-
-! '''Note'''
+! Note
-| At the point of the actual context switch (str sp / ldr sp) the thread stacks will look like this:
+| At the point of the actual context switch (str sp/ldr sp) the thread stacks will look like this:
 <br />(See: ARMv6ThreadSetupStack for additional information)
 <br />
@@ Line 606: / Line 1,832: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''OldStack'''
+! OldStack
 | The address to save the stack pointer to for the current thread (Passed in r0)
 |-
-! '''NewStack'''
+! NewStack
 | The address to restore the stack pointer from for the new thread (Passed in r1)
 |-
-! '''NewThread'''
+! NewThread
 | The handle of the new thread to switch to (Passed in r2)
 |-
-! '''Note'''
+! Note
-| At the point of the actual context switch (str sp / ldr sp) the thread stacks will look like this:
+| At the point of the actual context switch (str sp/ldr sp) the thread stacks will look like this:
 <br />(See: ARMv6ThreadSetupStack for additional information)
 <br />
@@ Line 679: / Line 1,905: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''OldStack'''
+! OldStack
 | The address to save the stack pointer to for the current thread (Passed in r0)
 |-
-! '''NewStack'''
+! NewStack
 | The address to restore the stack pointer from for the new thread (Passed in r1)
 |-
-! '''NewThread'''
+! NewThread
 | The handle of the new thread to switch to (Passed in r2)
 |-
-! '''Note'''
+! Note
-| At the point of the actual context switch (str sp / ldr sp) the thread stacks will look like this:
+| At the point of the actual context switch (str sp/ldr sp) the thread stacks will look like this:
 <br />(See: ARMv6ThreadSetupStack for additional information)
 <br />
@@ Line 752: / Line 1,978: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''OldStack'''
+! OldStack
 | The address to save the stack pointer to for the current thread (Passed in r0)
 |-
-! '''NewStack'''
+! NewStack
 | The address to restore the stack pointer from for the new thread (Passed in r1)
 |-
-! '''NewThread'''
+! NewThread
 | The handle of the new thread to switch to (Passed in r2)
 |-
-! '''Note'''
+! Note
-| At the point of the actual context switch (str sp / ldr sp) the thread stacks will look like this:
+| At the point of the actual context switch (str sp/ldr sp) the thread stacks will look like this:
 <br />(See: ARMv6ThreadSetupStack for additional information)
 <br />
@@ Line 825: / Line 2,051: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page ??? of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 837: / Line 2,063: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page ??? of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 849: / Line 2,075: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page ??? of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 861: / Line 2,087: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 8-6 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 873: / Line 2,099: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 8-6 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 885: / Line 2,111: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 8-6 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 897: / Line 2,123: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 8-6 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 909: / Line 2,135: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 8-6 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 916: / Line 2,142: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">function ARMv6PageTableGetEntry(Address:PtrUInt):TPageTableEntry;</pre>
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6PageTableGetEntry(Address:PtrUInt; var Entry:TPageTableEntry);</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get and Decode the entry in the Page Table that corresponds to the supplied virtual address</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 933: / Line 2,159: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 945: / Line 2,171: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 957: / Line 2,183: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 969: / Line 2,195: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | ARM arm states that CLZ is supported for ARMv5 and above
 |-
@@ Line 981: / Line 2,207: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | ARM arm states that CLZ is supported for ARMv5 and above
 |-
@@ Line 996: / Line 2,222: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 1,008: / Line 2,234: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Spin'''
+! Spin
 | Pointer to the Spin entry to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure (Returned in R0)
 |-
@@ Line 1,023: / Line 2,249: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Spin'''
+! Spin
 | Pointer to the Spin entry to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure (Returned in R0)
 |-
@@ Line 1,038: / Line 2,264: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Spin'''
+! Spin
 | Pointer to the Spin entry to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure (Returned in R0)
 |-
@@ Line 1,053: / Line 2,279: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Spin'''
+! Spin
 | Pointer to the Spin entry to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure (Returned in R0)
 |-
@@ Line 1,068: / Line 2,294: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Spin'''
+! Spin
 | Pointer to the Spin entry to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure (Returned in R0)
 |-
@@ Line 1,083: / Line 2,309: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Spin'''
+! Spin
 | Pointer to the Spin entry to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure (Returned in R0)
 |-
@@ Line 1,098: / Line 2,324: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Spin'''
+! Spin
 | Pointer to the Spin entry to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure (Returned in R0)
 |-
@@ Line 1,113: / Line 2,339: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Spin'''
+! Spin
 | Pointer to the Spin entry to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure (Returned in R0)
 |-
@@ Line 1,128: / Line 2,354: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Return'''
+! Return
-| True if the mask would enable IRQ on restore, False if it would not
+| True if the mask would enable IRQ on restore, False if it would not.
 |-
 |}
@@ Line 1,140: / Line 2,366: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Return'''
+! Return
-| True if the mask would enable FIQ on restore, False if it would not
+| True if the mask would enable FIQ on restore, False if it would not.
 |-
 |}
@@ Line 1,152: / Line 2,378: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 1,164: / Line 2,390: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 1,176: / Line 2,402: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Mutex'''
+! Mutex
 | Pointer to the Mutex entry to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure (Returned in R0)
 |-
@@ Line 1,191: / Line 2,417: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Mutex'''
+! Mutex
 | Pointer to the Mutex entry to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure (Returned in R0)
 |-
@@ Line 1,206: / Line 2,432: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Mutex'''
+! Mutex
 | Pointer to the Mutex entry to try to lock (Passed in R0)
 |-
-! '''Return'''
+! Return
-| ERROR_SUCCESS if completed, ERROR_LOCKED if already locked or another error code on failure (Returned in R0)
+| ERROR_SUCCESS if completed, ERROR_LOCKED if already locked or another error code on failure (Returned in R0).
 |-
 |}
@@ Line 1,217: / Line 2,443: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function ARMv6ThreadGetCurrent:TThreadHandle; assembler; nostackframe;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the current thread id from the c13 (Thread and process ID) register of system control coprocessor CP15</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the current thread Id from the c13 (Thread and process ID) register of system control coprocessor CP15</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | See page 3-129 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 1,233: / Line 2,459: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| Set the current thread id in the c13 (Thread and process ID) register of system control coprocessor CP15
+| Set the current thread Id in the c13 (Thread and process ID) register of system control coprocessor CP15
 See page 3-129 of the ARM1176JZF-S Technical Reference Manual
 |-
@@ Line 1,246: / Line 2,472: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''StackBase'''
+! StackBase
 | Pointer to the base (highest address) of the allocated stack (as returned by ThreadAllocateStack
 |-
-! '''StartProc'''
+! StartProc
 | The procedure the thread will start executing when resumed
 |-
-! '''ReturnProc'''
+! ReturnProc
 | The procedure the thread will return to on exit
 |-
-! '''Return'''
+! Return
-| Pointer to the starting address of the stack, which will be the Stack Pointer on the first context switch
+| Pointer to the starting address of the stack, which will be the Stack Pointer on the first context switch.
 |-
-! '''Note'''
+! Note
 | At the point of a context switch the thread stack will look like this:
 <br />(Base "Highest Address" of Stack)
@@ Line 1,338: / Line 2,564: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 1,353: / Line 2,579: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 1,368: / Line 2,594: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 1,383: / Line 2,609: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 1,395: / Line 2,621: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | This routine is registered as the vector for undefined instruction exception in the vector table loaded during startup
 |-
@@ Line 1,407: / Line 2,633: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | This routine is registered as the vector for SWI requests in the vector table loaded during startup. When the processor executes an SVC it switches to SWI mode, stores the address of the next instruction in the SWI mode link register (lr_svc) and saves the current program status register into the SWI mode saved program status register (spsr_svc).
 <br />The SWI handler first saves the SWI mode lr and spsr (which represent the location and state to return to) onto the SYS mode stack using the srsdb (Store Return State Decrement Before) instruction.
@@ Line 1,433: / Line 2,659: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | This routine is registered as the vector for prefetch abort exception in the vector table loaded during startup
 |-
@@ Line 1,445: / Line 2,671: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | This routine is registered as the vector for data abort exception in the vector table loaded during startup
 |-
@@ Line 1,457: / Line 2,683: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 1,469: / Line 2,695: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | This routine is registered as the vector for IRQ requests in the vector table loaded during startup.
 <br />At the end of each instruction the processor checks the IRQ line and if triggered it will lookup the vector in the vector table and jump to the routine listed.
@@ Line 1,492: / Line 2,718: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | This routine is registered as the vector for FIQ requests in the vector table loaded during startup.
 <br />At the end of each instruction the processor checks the FIQ line and if triggered it will lookup the vector in the vector table and jump to the routine listed.
@@ Line 1,507: / Line 2,733: @@
 <br />
 <br />To return from the fast interrupt request the handler uses the rfeia (Return From Exception Increment After) instruction which will load the pc and cpsr from the stack of the current mode (SYS or SVC).
+|-
+|}
+</div></div>
+<br />
+'''ARMv6 helper functions'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6GetFPEXC:LongWord; assembler; nostackframe;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6GetFPSCR:LongWord; assembler; nostackframe;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure ARMv6StartMMU; assembler; nostackframe;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6GetPageTableCoarse(Address:PtrUInt):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the descriptor for a Coarse Page Table entry (1MB)</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 6-39 of the ARM1176JZF-S Technical Reference Manual
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6SetPageTableCoarse(Address,CoarseAddress:PtrUInt; Flags:Word):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Set the descriptor for a Coarse Page Table entry (1MB)</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 6-39 of the ARM1176JZF-S Technical Reference Manual
+Caller must call ARMv6InvalidateTLB after changes if MMU is enabled
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6GetPageTableLarge(Address:PtrUInt):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the descriptor for a Large Page Table entry (64KB)</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 6-40 of the ARM1176JZF-S Technical Reference Manual
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6SetPageTableLarge(Address,PhysicalAddress:PtrUInt; Flags:Word):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Set the descriptor for a Large Page Table entry (64KB)</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Large Page Table descriptors must begin on a 16 longword (64 byte) boundary and be repeated for 16 consecutive longwords
+See page 6-40 of the ARM1176JZF-S Technical Reference Manual
+<br />Caller must call ARMv6InvalidateTLB after changes if MMU is enabled
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6GetPageTableSmall(Address:PtrUInt):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the descriptor for a Small Page Table entry (4KB)</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 6-40 of the ARM1176JZF-S Technical Reference Manual
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6SetPageTableSmall(Address,PhysicalAddress:PtrUInt; Flags:Word):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Set the descriptor for a Small Page Table entry (4KB)</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 6-40 of the ARM1176JZF-S Technical Reference Manual
+Caller must call ARMv6InvalidateTLB after changes if MMU is enabled
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6GetPageTableSection(Address:PtrUInt):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the descriptor for a Page Table Section (1MB) or Supersection (16MB)</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 6-39 of the ARM1176JZF-S Technical Reference Manual
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6SetPageTableSection(Address,PhysicalAddress:PtrUInt; Flags:LongWord):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Set the descriptor for a Page Table Section (1MB)</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| See page 6-39 of the ARM1176JZF-S Technical Reference Manual
+Caller must call ARMv6InvalidateTLB after changes if MMU is enabled
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function ARMv6SetPageTableSupersection(Address,PhysicalAddress:PtrUInt; Flags:LongWord):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Set the descriptor for a Page Table Supersection (16MB)</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Supersection Page Table descriptors must begin on a 16 longword (64 byte) boundary and be repeated for 16 consecutive longwords
+See page 6-39 of the ARM1176JZF-S Technical Reference Manual
+<br />Caller must call ARMv6InvalidateTLB after changes if MMU is enabled
 |-
 |}

See page 6-39 of the ARM1176JZF-S Technical Reference Manual

`ARMV6_L1D_FLAG_COARSE_NS = (1 shl 3);`	NS (Non Secure) Attribute bit to enable the support of TrustZone
`ARMV6_L1D_FLAG_SECTION_NS = (1 shl 19);`	NS (Non Secure) Attribute bit to enable the support of TrustZone
`ARMV6_L1D_FLAG_SUPERSECTION = (1 shl 18);`	The descriptor is a 16MB Supersection instead of a 1MB Section (Section Only)
`ARMV6_L1D_FLAG_NOT_GLOBAL = (1 shl 17);`	The Not-Global (nG) bit, determines if the translation is marked as global (0), or process-specific (1) (Section Only)
`ARMV6_L1D_FLAG_SHARED = (1 shl 16);`	The Shared (S) bit, determines if the translation is for Non-Shared (0), or Shared (1) memory. This only applies to Normal memory regions. Device memory can be Shared or Non-Shared as determined by the TEX bits and the C and B bits (Section Only).
`ARMV6_L1D_FLAG_APX = (1 shl 15);`	The access permissions extension (APX) bit, provides an extra access permission bit (Section Only)
`ARMV6_L1D_FLAG_P = (1 shl 9);`	If the P bit is supported and set for the memory region, it indicates to the system memory controller that this memory region has ECC enabled. ARM1176JZF-S processors do not support the P bit.
`ARMV6_L1D_FLAG_XN = (1 shl 4);`	The Execute-Never (XN) bit, determines if the region is Executable (0) or Not-executable(1) (Section Only)
`ARMV6_L1D_FLAG_C = (1 shl 3);`	Cacheable (C) bit (Section Only)
`ARMV6_L1D_FLAG_B = (1 shl 2);`	Bufferable (B) bit (Section Only)

See page 6-39 of the ARM1176JZF-S Technical Reference Manual

`ARMV6_L1D_COARSE_BASE_MASK = $FFFFFC00;`
`ARMV6_L1D_SECTION_BASE_MASK = $FFF00000;`
`ARMV6_L1D_SUPERSECTION_BASE_MASK = $FF000000;`
`ARMV6_L1D_DOMAIN_MASK = ($F shl 5);`	Security Domain of the Descriptor
`ARMV6_L1D_TEX_MASK = (7 shl 12);`	Type extension field bits (Section Only)
`ARMV6_L1D_AP_MASK = (3 shl 10);`	Access permission bits (Section Only)

See page 6-15 of the ARM1176JZF-S Technical Reference Manual (Section Only)

`ARMV6_L1D_TEX0 = (0 shl 12);`
`ARMV6_L1D_TEX1 = (1 shl 12);`
`ARMV6_L1D_TEX2 = (2 shl 12);`
`ARMV6_L1D_TEX4 = (4 shl 12);`	Only used for Cacheable memory values
`ARMV6_L1D_TEX5 = (5 shl 12);`	Only used for Cacheable memory values
`ARMV6_L1D_TEX6 = (6 shl 12);`	Only used for Cacheable memory values
`ARMV6_L1D_TEX7 = (7 shl 12);`	Only used for Cacheable memory values

See page 6-12 of the ARM1176JZF-S Technical Reference Manual (Section Only)

`ARMV6_L1D_AP0 = (0 shl 10);`
`ARMV6_L1D_AP1 = (1 shl 10);`
`ARMV6_L1D_AP2 = (2 shl 10);`
`ARMV6_L1D_AP3 = (3 shl 10);`

See page 6-12 of the ARM1176JZF-S Technical Reference Manual
This is not the full set of permissions as Ultibo always runs in priviledged mode
The XN bit can also be applied to control whether memory regions are executable or not

`ARMV6_L1D_ACCESS_NONE = ARMV6_L1D_AP0;`	No Access for both Privileged and Unprivileged code
`ARMV6_L1D_ACCESS_READONLY = ARMV6_L1D_FLAG_APX or ARMV6_L1D_AP3;`	Read-Only for both Privileged and Unprivileged code
`ARMV6_L1D_ACCESS_READWRITE = ARMV6_L1D_AP3;`	Read-Write for both Privileged and Unprivileged code

See page 6-15 of the ARM1176JZF-S Technical Reference Manual

`ARMV6_L1D_CACHE_STRONGLY_ORDERED = ARMV6_L1D_TEX0;`	Strongly Ordered. (Always Shared)
`ARMV6_L1D_CACHE_SHARED_DEVICE = ARMV6_L1D_TEX0 or ARMV6_L1D_FLAG_B;`	Device. (Always Shared)
`ARMV6_L1D_CACHE_NORMAL_WRITE_THROUGH = ARMV6_L1D_TEX0 or ARMV6_L1D_FLAG_C;`	Normal. Write Through (Shared if S bit set)
`ARMV6_L1D_CACHE_NORMAL_WRITE_BACK = ARMV6_L1D_TEX0 or ARMV6_L1D_FLAG_C or ARMV6_L1D_FLAG_B;`	Normal. Write Back (Shared if S bit set)
`ARMV6_L1D_CACHE_NORMAL_NONCACHED = ARMV6_L1D_TEX1;`	Normal. Noncacheable (Shared if S bit set)
`ARMV6_L1D_CACHE_NONSHARED_DEVICE = ARMV6_L1D_TEX2;`	Device. (Not Shared)

See page 6-40 of the ARM1176JZF-S Technical Reference Manual
Level Two Page Table contains 256 32bit (4 byte) entries for a total size of 1KB

`ARMV6_L2D_TYPE_LARGE = 1;`	The entry points to a 64KB Large page in memory
`ARMV6_L2D_TYPE_SMALL = 2;`	The entry points to a 4KB Extended small page in memory. Bit[0] of the entry is the XN (Execute Never) bit for the entry.

See page 6-40 of the ARM1176JZF-S Technical Reference Manual

`ARMV6_L2D_FLAG_LARGE_XN = (1 shl 15);`	The Execute-Never (XN) bit, determines if the region is Executable (0) or Not-executable(1)
`ARMV6_L2D_FLAG_SMALL_XN = (1 shl 0);`	The Execute-Never (XN) bit, determines if the region is Executable (0) or Not-executable(1)
`ARMV6_L2D_FLAG_NOT_GLOBAL = (1 shl 11);`	The Not-Global (nG) bit, determines if the translation is marked as global (0), or process-specific (1)
`ARMV6_L2D_FLAG_SHARED = (1 shl 10);`	The Shared (S) bit, determines if the translation is for Non-Shared (0), or Shared (1) memory. This only applies to Normal memory regions. Device memory can be Shared or Non-Shared as determined by the TEX bits and the C and B bits
`ARMV6_L2D_FLAG_APX = (1 shl 9);`	The access permissions extension (APX) bit, provides an extra access permission bit.
`ARMV6_L2D_FLAG_C = (1 shl 3);`	Cacheable (C) bit
`ARMV6_L2D_FLAG_B = (1 shl 2);`	Bufferable (B) bit

See page 6-40 of the ARM1176JZF-S Technical Reference Manual

`ARMV6_L2D_LARGE_BASE_MASK = $FFFF0000;`
`ARMV6_L2D_SMALL_BASE_MASK = $FFFFF000;`
`ARMV6_L2D_LARGE_TEX_MASK = (7 shl 12);`	Type extension field bits
`ARMV6_L2D_SMALL_TEX_MASK = (7 shl 6);`	Type extension field bits
`ARMV6_L2D_AP_MASK = (3 shl 4);`	Access permission bits

See page 6-15 of the ARM1176JZF-S Technical Reference Manual

`ARMV6_L2D_LARGE_TEX0 = (0 shl 12);`
`ARMV6_L2D_LARGE_TEX1 = (1 shl 12);`
`ARMV6_L2D_LARGE_TEX2 = (2 shl 12);`
`ARMV6_L2D_LARGE_TEX4 = (4 shl 12);`
`ARMV6_L2D_LARGE_TEX5 = (5 shl 12);`	Only used for Cacheable memory values
`ARMV6_L2D_LARGE_TEX6 = (6 shl 12);`	Only used for Cacheable memory values
`ARMV6_L2D_LARGE_TEX7 = (7 shl 12);`	Only used for Cacheable memory values

See page 6-15 of the ARM1176JZF-S Technical Reference Manual

`ARMV6_L2D_SMALL_TEX0 = (0 shl 6);`
`ARMV6_L2D_SMALL_TEX1 = (1 shl 6);`
`ARMV6_L2D_SMALL_TEX2 = (2 shl 6);`
`ARMV6_L2D_SMALL_TEX4 = (4 shl 6);`
`ARMV6_L2D_SMALL_TEX5 = (5 shl 6);`	Only used for Cacheable memory values
`ARMV6_L2D_SMALL_TEX6 = (6 shl 6);`	Only used for Cacheable memory values
`ARMV6_L2D_SMALL_TEX7 = (7 shl 6);`	Only used for Cacheable memory values

See page 6-12 of the ARM1176JZF-S Technical Reference Manual

`ARMV6_L2D_AP0 = (0 shl 4);`
`ARMV6_L2D_AP1 = (1 shl 4);`
`ARMV6_L2D_AP2 = (2 shl 4);`
`ARMV6_L2D_AP3 = (3 shl 4);`

See page 6-15 of the ARM1176JZF-S Technical Reference Manual

`ARMV6_L2D_LARGE_CACHE_STRONGLY_ORDERED = ARMV6_L2D_LARGE_TEX0;`	Strongly Ordered. (Always Shared)
`ARMV6_L2D_LARGE_CACHE_SHARED_DEVICE = ARMV6_L2D_LARGE_TEX0 or ARMV6_L2D_FLAG_B;`	Device. (Always Shared)
`ARMV6_L2D_LARGE_CACHE_NORMAL_WRITE_THROUGH = ARMV6_L2D_LARGE_TEX0 or ARMV6_L2D_FLAG_C;`	Normal. Write Through (Shared if S bit set)
`ARMV6_L2D_LARGE_CACHE_NORMAL_WRITE_BACK = ARMV6_L2D_LARGE_TEX0 or ARMV6_L2D_FLAG_C or ARMV6_L2D_FLAG_B;`	Normal. Write Back (Shared if S bit set)
`ARMV6_L2D_LARGE_CACHE_NORMAL_NONCACHED = ARMV6_L2D_LARGE_TEX1;`	Normal. Noncacheable (Shared if S bit set)
`ARMV6_L2D_LARGE_CACHE_NONSHARED_DEVICE = ARMV6_L2D_LARGE_TEX2;`	Device. (Not Shared)

See page 6-15 of the ARM1176JZF-S Technical Reference Manual

`ARMV6_L2D_SMALL_CACHE_STRONGLY_ORDERED = ARMV6_L2D_SMALL_TEX0;`	Strongly Ordered. (Always Shared)
`ARMV6_L2D_SMALL_CACHE_SHARED_DEVICE = ARMV6_L2D_SMALL_TEX0 or ARMV6_L2D_FLAG_B;`	Device. (Always Shared)
`ARMV6_L2D_SMALL_CACHE_NORMAL_WRITE_THROUGH = ARMV6_L2D_SMALL_TEX0 or ARMV6_L2D_FLAG_C;`	Normal. Write Through (Shared if S bit set)
`ARMV6_L2D_SMALL_CACHE_NORMAL_WRITE_BACK = ARMV6_L2D_SMALL_TEX0 or ARMV6_L2D_FLAG_C or ARMV6_L2D_FLAG_B;`	Normal. Write Back (Shared if S bit set)
`ARMV6_L2D_SMALL_CACHE_NORMAL_NONCACHED = ARMV6_L2D_SMALL_TEX1;`	Normal. Noncacheable (Shared if S bit set)
`ARMV6_L2D_SMALL_CACHE_NONSHARED_DEVICE = ARMV6_L2D_SMALL_TEX2;`	Device. (Not Shared)

OldStack	The address to save the stack pointer to for the current thread (Passed in r0)
NewStack	The address to restore the stack pointer from for the new thread (Passed in r1)
NewThread	The handle of the new thread to switch to (Passed in r2)
Note	At the point of the actual context switch (str sp/ldr sp) the thread stacks will look like this: (See: ARMv6ThreadSetupStack for additional information) (Base "Highest Address" of Stack) . . . . cpsr <- The current program status register value to load on return from the context switch lr/pc <- The address to return to from the context switch lr <- The lr value prior to the context switch r12 <- r11 <- r10 <- r9 <- r8 <- r7 <- r6 <- The value of these registers prior to the context switch r5 <- r4 <- r3 <- r2 <- r1 <- r0 <- d15 <- d14 <- d13 <- d12 <- d11 <- d10 <- d9 <- d8 <- The value of these floating point registers prior to the context switch d7 <- d6 <- d5 <- d4 <- d3 <- d2 <- d1 <- d0 <- fpscr <- The floating point FPSCR register fpexc <- The floating point FPEXC register (Current StackPointer points to here) . . . . (Top "Lowest Address" of Stack) This form of context switch relies on the IRQ handler to save the necessary registers including the lr, cpsr and other general registers from the point at which the thread was interrupted. The thread to be resumed may have been saved by a previous IRQ or by a call to the standard context switch from SchedulerReschule or it may be a new thread to be run for the first time. All of these result in the same context record on the stack and therefore can be resumed the same way. The context switch will be performed by switching to SYS mode, exchanging the stack pointers and then returning to IRQ mode.

Spin	Pointer to the Spin entry to lock (Passed in R0)
Return	ERROR_SUCCESS if completed or another error code on failure (Returned in R0)

Mutex	Pointer to the Mutex entry to lock (Passed in R0)
Return	ERROR_SUCCESS if completed or another error code on failure (Returned in R0)

Mutex	Pointer to the Mutex entry to try to lock (Passed in R0)
Return	ERROR_SUCCESS if completed, ERROR_LOCKED if already locked or another error code on failure (Returned in R0).