Unit Serial
From Ultibo.org
Return to Unit Reference
Description
Serial devices represent a communication device that can be both read and written and has a set of common properties and capabilities. The underlying device may be an actual UART or it may be some other form of device such as a USB to Serial converter. As long as the device can implement the common capabilities then it can be accessed as a serial device without regard to the actual implementation.
Each serial device returns a set of properties that describe the capabilities of the device and includes a set of flags that indicate what features are supported.
Reads from and writes to serial devices are buffered so that varying data transfer rates can be accomodated and both reads and writes allow for non blocking so that a caller can avoid waiting for received data to be available or the device to be ready to transmit.
This unit also implements the serial logging device which can be configured via parameters in the GlobalConfig unit or from the command line.
Constants
To be documented
Type definitions
To be documented
Public variables
To be documented
Function declarations
Initialization functions
procedure SerialInit;
Description: Initialize the Serial unit and Serial device table
| Note | None documented |
|---|
Serial functions
function SerialDeviceOpen(Serial:PSerialDevice; BaudRate,DataBits,StopBits,Parity,FlowControl,ReceiveDepth,TransmitDepth:LongWord):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialDeviceClose(Serial:PSerialDevice):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialDeviceRead(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialDeviceWrite(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialDeviceStatus(Serial:PSerialDevice):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialDeviceProperties(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialDeviceCreate:PSerialDevice;
Description: Create a new Serial entry
| Return | Pointer to new Serial entry or nil if Serial could not be created |
|---|
function SerialDeviceCreateEx(Size:LongWord):PSerialDevice;
Description: Create a new Serial entry
| Size | Size in bytes to allocate for new Serial (Including the Serial entry) |
|---|---|
| Return | Pointer to new Serial entry or nil if Serial could not be created |
function SerialDeviceDestroy(Serial:PSerialDevice):LongWord;
Description: Destroy an existing Serial entry
| Note | None documented |
|---|
function SerialDeviceRegister(Serial:PSerialDevice):LongWord;
Description: Register a new Serial in the Serial table
| Note | None documented |
|---|
function SerialDeviceDeregister(Serial:PSerialDevice):LongWord;
Description: Deregister a Serial ?rom the Serial table
| Note | None documented |
|---|
function SerialDeviceFind(SerialId:LongWord):PSerialDevice;
Description: To be documented
| Note | None documented |
|---|
function SerialDeviceFindByName(const Name:String):PSerialDevice; inline;
Description: To be documented
| Note | None documented |
|---|
function SerialDeviceFindByDescription(const Description:String):PSerialDevice; inline;
Description: To be documented
| Note | None documented |
|---|
function SerialDeviceEnumerate(Callback:TSerialEnumerate; Data:Pointer):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialDeviceNotification(Serial:PSerialDevice; Callback:TSerialNotification; Data:Pointer; Notification,Flags:LongWord):LongWord;
Description: To be documented
| Note | None documented |
|---|
Serial logging functions
function SerialLoggingStart(Logging:PLoggingDevice):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialLoggingStop(Logging:PLoggingDevice):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialLoggingOutput(Logging:PLoggingDevice; const Data:String):LongWord;
Description: To be documented
| Note | None documented |
|---|
RTL serial functions
function SysSerialAvailable:Boolean;
Description: Check if a Serial device is available
| Note | None documented |
|---|
function SysSerialOpen(BaudRate,DataBits,StopBits,Parity,FlowControl,ReceiveDepth,TransmitDepth:LongWord):LongWord;
Description: Open the default Serial device ready for sending and receiving
| BaudRate | Baud rate for the connection (eg 9600, 57600, 115200 etc |
|---|---|
| DataBits | Size of the data (eg SERIAL_DATA_8BIT) |
| StopBits | Number of stop bits (eg SERIAL_STOP_1BIT) |
| Parity | Parity type for the data (eg SERIAL_PARITY_NONE) |
| FlowControl | Flow control for the connection (eg SERIAL_FLOW_NONE) |
| ReceiveDepth | Size of the receive buffer (0 = Default size) |
| TransmitDepth | Size of the transmit buffer (0 = Default size) |
function SysSerialClose:LongWord;
Description: Close the default Serial device and terminate sending and receiving
| Note | None documented |
|---|
function SysSerialWrite(Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;
Description: Write data to the default Serial device
| Buffer | Pointer to a buffer of data to transmit |
|---|---|
| Size | The size of the buffer |
| Count | The number of bytes written on return |
Serial helper functions
function SerialGetCount:LongWord; inline;
Description: Get the current Serial count
| Note | None documented |
|---|
function SerialDeviceGetDefault:PSerialDevice; inline;
Description: Get the current default Serial device
| Note | None documented |
|---|
function SerialDeviceSetDefault(Serial:PSerialDevice):LongWord;
Description: Set the current default Serial device
| Note | None documented |
|---|
function SerialDeviceCheck(Serial:PSerialDevice):PSerialDevice;
Description: Check if the supplied Serial is in the Serial table
| Note | None documented |
|---|
function SerialBufferReadComplete(Buffer:PSerialBuffer; Removed:LongWord):Boolean;
Description: Update the buffer to reflect the number of bytes removed when reading
| Note | Caller must hold the lock on the serial device which owns the buffer |
|---|
function SerialBufferWriteStart(Buffer:PSerialBuffer; var Available:LongWord):Pointer;
Description: Return a pointer to the next write to the buffer and the number of bytes that can be written
| Note | Caller must hold the lock on the serial device which owns the buffer |
|---|
function SerialBufferWriteComplete(Buffer:PSerialBuffer; Added:LongWord):Boolean;
Description: Update the buffer to reflect the number of bytes added when writing
| Note | Caller must hold the lock on the serial device which owns the buffer |
|---|
procedure SerialLog(Level:LongWord; Serial:PSerialDevice; const AText:String);
Description: To be documented
| Note | None documented |
|---|
procedure SerialLogInfo(Serial:PSerialDevice; const AText:String); inline;
Description: To be documented
| Note | None documented |
|---|
procedure SerialLogError(Serial:PSerialDevice; const AText:String); inline;
Description: To be documented
| Note | None documented |
|---|
procedure SerialLogDebug(Serial:PSerialDevice; const AText:String); inline;
Description: To be documented
| Note | None documented |
|---|
function SerialParityToString(Parity:LongWord):String;
Description: To be documented
| Note | None documented |
|---|
function SerialFlowControlToString(Flow:LongWord):String;
Description: To be documented
| Note | None documented |
|---|
Serial logging helper functions
function SerialLoggingDeviceAdd(Serial:PSerialDevice):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialLoggingDeviceRemove(Serial:PSerialDevice):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialLoggingDeviceParameters(Serial:PSerialDevice; const Parameters:String; var BaudRate,Parity,DataBits,StopBits:LongWord):LongWord;
Description: Break down the serial parameters value into component parts of baud rate, parity, data bits and stop bits
| Note | The parameters must be in the form 'BaudRate,Parity,DataBits,StopBits' (eg '115200,N,8,1') |
|---|
function SerialLoggingFirstWord(var Value:String;const Delimiter:String):String;
Description: To be documented
| Note | None documented |
|---|
function SerialLoggingDeviceEnum(Serial:PSerialDevice; Data:Pointer):LongWord;
Description: To be documented
| Note | None documented |
|---|
function SerialLoggingDeviceNotify(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;
Description: To be documented
| Note | None documented |
|---|
Return to Unit Reference
