Difference between revisions of "Unit PL011"

Latest revision as of 05:46, 31 August 2021

`PL011_UART_DESCRIPTION = 'ARM PrimeCell PL011 UART';`	Description of PL011 device

`PL011_UART_MIN_BAUD = 300;`	Default minimum of 300 baud
`PL011_UART_MAX_BAUD = 1500000;`	Default maximum based on 24MHz clock

`PL011_UART_MIN_DATABITS = SERIAL_DATA_5BIT;`
`PL011_UART_MAX_DATABITS = SERIAL_DATA_8BIT;`

`PL011_UART_MIN_STOPBITS = SERIAL_STOP_1BIT;`
`PL011_UART_MAX_STOPBITS = SERIAL_STOP_2BIT;`

`PL011_UART_MAX_PARITY = SERIAL_PARITY_EVEN;`

`PL011_UART_MAX_FLOW = SERIAL_FLOW_RTS_CTS;`

`PL011_UART_CLOCK_RATE = 24000000;`

`PL011_UART_RX_POLL_LIMIT = 256;`	Number of times interrupt handler may poll the read FIFO
`PL011_UART_RX_BUFFER_SIZE = 1024;`

PL011 UART data PL011_UART_DR_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

`PL011_UART_DR_OE = (1 shl 11);`	Overrun error
`PL011_UART_DR_BE = (1 shl 10);`	Break error
`PL011_UART_DR_PE = (1 shl 9);`	Parity error
`PL011_UART_DR_FE = (1 shl 8);`	Framing error
`PL011_UART_DR_DATA = ($FF shl 0);`	Receive/Transmit data
`PL011_UART_DR_ERROR = PL011_UART_DR_OE or PL011_UART_DR_BE or PL011_UART_DR_PE or PL011_UART_DR_FE;`

PL011 UART receive status/error clear PL011_UART_RSRECR_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

`PL011_UART_RSRECR_OE = (1 shl 3);`	Overrun error
`PL011_UART_RSRECR_BE = (1 shl 2);`	Break error
`PL011_UART_RSRECR_PE = (1 shl 1);`	Parity error
`PL011_UART_RSRECR_FE = (1 shl 0);`	Framing error

PL011 UART flag PL011_UART_FR_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

`PL011_UART_FR_RI = (1 shl 8);`	Unsupported, write zero, read as don't care
`PL011_UART_FR_TXFE = (1 shl 7);`	Transmit FIFO empty
`PL011_UART_FR_RXFF = (1 shl 6);`	Receive FIFO full
`PL011_UART_FR_TXFF = (1 shl 5);`	Transmit FIFO full
`PL011_UART_FR_RXFE = (1 shl 4);`	Receive FIFO empty
`PL011_UART_FR_BUSY = (1 shl 3);`	UART busy
`PL011_UART_FR_DCD = (1 shl 2);`	Unsupported, write zero, read as don't care
`PL011_UART_FR_DSR = (1 shl 1);`	Unsupported, write zero, read as don't care
`PL011_UART_FR_CTS = (1 shl 0);`	Clear to send (This bit is the complement of the UART clear to send, nUARTCTS, modem status input. That is, the bit is 1 when nUARTCTS is LOW)

PL011 UART integer baud rate divisor PL011_UART_IBRD_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.htm

`PL011_UART_IBRD_MASK = ($FFFF shl 0);`

PL011 UART fractional baud rate divisor PL011_UART_FBRD_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.htm

`PL011_UART_FBRD_MASK = ($3F shl 0);`

PL011 UART line control PL011_UART_LCRH_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

`PL011_UART_LCRH_SPS = (1 shl 7);`	Stick parity select
`PL011_UART_LCRH_WLEN = (3 shl 5);`	Word length
`PL011_UART_LCRH_WLEN8 = (3 shl 5);`	8 bits
`PL011_UART_LCRH_WLEN7 = (2 shl 5);`	7 bits
`PL011_UART_LCRH_WLEN6 = (1 shl 5);`	6 bits
`PL011_UART_LCRH_WLEN5 = (0 shl 5);`	5 bits
`PL011_UART_LCRH_FEN = (1 shl 4);`	Enable FIFOs
`PL011_UART_LCRH_STP2 = (1 shl 3);`	Two stop bits select
`PL011_UART_LCRH_EPS = (1 shl 2);`	Even parity select (0 = odd parity/1 = even parity)
`PL011_UART_LCRH_PEN = (1 shl 1);`	Parity enable
`PL011_UART_LCRH_BRK = (1 shl 0);`	Send break

PL011 UART control PL011_UART_CR_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

`PL011_UART_CR_CTSEN = (1 shl 15);`	CTS hardware flow control enable (If this bit is set to 1 data is only transmitted when the nUARTCTS signal is asserted)
`PL011_UART_CR_RTSEN = (1 shl 14);`	RTS hardware flow control enable (If this bit is set to 1 data is only requested when there is space in the receive FIFO for it to be received)
`PL011_UART_CR_OUT2 = (1 shl 13);`	Unsupported, write zero, read as don't care.
`PL011_UART_CR_OUT1 = (1 shl 12);`	Unsupported, write zero, read as don't care.
`PL011_UART_CR_RTS = (1 shl 11);`	Request to send (This bit is the complement of the UART request to send, nUARTRTS, modem status output. That is, when the bit is programmed to a 1 then nUARTRTS is LOW).
`PL011_UART_CR_DTR = (1 shl 10);`	Unsupported, write zero, read as don't care.
`PL011_UART_CR_RXE = (1 shl 9);`	Receive enable
`PL011_UART_CR_TXE = (1 shl 8);`	Transmit enable
`PL011_UART_CR_LBE = (1 shl 7);`	Loopback enable
Bits 6:3 Reserved - Write as 0, read as don't care
`PL011_UART_CR_SIRLP = (1 shl 2);`	Unsupported, write zero, read as don't care.
`PL011_UART_CR_SIREN = (1 shl 1);`	Unsupported, write zero, read as don't care.
`PL011_UART_CR_UARTEN = (1 shl 0);`	UART enable

PL011 UART interrupt FIFO level select PL011_UART_IFLS_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

`PL011_UART_IFLS_RXIFPSEL = (7 shl 9);`	Unsupported, write zero, read as don't care
`PL011_UART_IFLS_TXIFPSEL = (7 shl 6);`	Unsupported, write zero, read as don't care
`PL011_UART_IFLS_RXIFLSEL = (7 shl 3);`	Receive interrupt FIFO level select
`PL011_UART_IFLS_RXIFLSEL1_8 = (0 shl 3);`	b000 = Receive FIFO becomes >= 1/8 full
`PL011_UART_IFLS_RXIFLSEL1_4 = (1 shl 3);`	b001 = Receive FIFO becomes >= 1/4 full
`PL011_UART_IFLS_RXIFLSEL1_2 = (2 shl 3);`	b010 = Receive FIFO becomes >= 1/2 full
`PL011_UART_IFLS_RXIFLSEL3_4 = (3 shl 3);`	b011 = Receive FIFO becomes >= 3/4 full
`PL011_UART_IFLS_RXIFLSEL7_8 = (4 shl 3);`	b100 = Receive FIFO becomes >= 7/8 full
`PL011_UART_IFLS_TXIFLSEL = (7 shl 0);`	Transmit interrupt FIFO level select
`PL011_UART_IFLS_TXIFLSEL1_8 = (0 shl 0);`	b000 = Transmit FIFO becomes <= 1/8 full
`PL011_UART_IFLS_TXIFLSEL1_4 = (1 shl 0);`	b001 = Transmit FIFO becomes <= 1/4 full
`PL011_UART_IFLS_TXIFLSEL1_2 = (2 shl 0);`	b010 = Transmit FIFO becomes <= 1/2 full
`PL011_UART_IFLS_TXIFLSEL3_4 = (3 shl 0);`	b011 = Transmit FIFO becomes <= 3/4 full
`PL011_UART_IFLS_TXIFLSEL7_8 = (4 shl 0);`	b100 = Transmit FIFO becomes <= 7/8 full

PL011 UART interrupt mask set/clear PL011_UART_IMSC_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

`PL011_UART_IMSC_OEIM = (1 shl 10);`	Overrun error interrupt mask
`PL011_UART_IMSC_BEIM = (1 shl 9);`	Break error interrupt mask
`PL011_UART_IMSC_PEIM = (1 shl 8);`	Parity error interrupt mask
`PL011_UART_IMSC_FEIM = (1 shl 7);`	Framing error interrupt mask
`PL011_UART_IMSC_RTIM = (1 shl 6);`	Receive timeout interrupt mask
`PL011_UART_IMSC_TXIM = (1 shl 5);`	Transmit interrupt mask
`PL011_UART_IMSC_RXIM = (1 shl 4);`	Receive interrupt mask
`PL011_UART_IMSC_DSRMIM = (1 shl 3);`	Unsupported, write zero, read as don't care.
`PL011_UART_IMSC_DCDMIM = (1 shl 2);`	Unsupported, write zero, read as don't care.
`PL011_UART_IMSC_CTSMIM = (1 shl 1);`	nUARTCTS modem interrupt mask
`PL011_UART_IMSC_RIMIM = (1 shl 0);`	Unsupported, write zero, read as don't care.

PL011 UART raw interrupt status PL011_UART_RIS_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

`PL011_UART_RIS_OERIS = (1 shl 10);`	Overrun error interrupt status
`PL011_UART_RIS_BERIS = (1 shl 9);`	Break error interrupt status
`PL011_UART_RIS_PERIS = (1 shl 8);`	Parity error interrupt status
`PL011_UART_RIS_FERIS = (1 shl 7);`	Framing error interrupt status
`PL011_UART_RIS_RTRIS = (1 shl 6);`	Receive timeout interrupt status
`PL011_UART_RIS_TXRIS = (1 shl 5);`	Transmit interrupt status
`PL011_UART_RIS_RXRIS = (1 shl 4);`	Receive interrupt status
`PL011_UART_RIS_DSRMRIS = (1 shl 3);`	Unsupported, write zero, read as don't care.
`PL011_UART_RIS_DCDMRIS = (1 shl 2);`	Unsupported, write zero, read as don't care.
`PL011_UART_RIS_CTSMRIS = (1 shl 1);`	nUARTCTS modem interrupt status
`PL011_UART_RIS_RIMRIS = (1 shl 0);`	Unsupported, write zero, read as don't care.

PL011 UART masked interrupt status PL011_UART_MIS_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

`PL011_UART_MIS_OEMIS = (1 shl 10);`	Overrun error masked interrupt status
`PL011_UART_MIS_BEMIS = (1 shl 9);`	Break error masked interrupt status
`PL011_UART_MIS_PEMIS = (1 shl 8);`	Parity error masked interrupt status
`PL011_UART_MIS_FEMIS = (1 shl 7);`	Framing error masked interrupt status
`PL011_UART_MIS_RTMIS = (1 shl 6);`	Receive timeout masked interrupt status
`PL011_UART_MIS_TXMIS = (1 shl 5);`	Transmit masked interrupt status
`PL011_UART_MIS_RXMIS = (1 shl 4);`	Receive masked interrupt status
`PL011_UART_MIS_DSRMMIS = (1 shl 3);`	Unsupported, write zero, read as don't care.
`PL011_UART_MIS_DCDMMIS = (1 shl 2);`	Unsupported, write zero, read as don't care.
`PL011_UART_MIS_CTSMMIS = (1 shl 1);`	nUARTCTS modem masked interrupt status
`PL011_UART_MIS_RIMMIS = (1 shl 0);`	Unsupported, write zero, read as don't care.

PL011 UART interrupt clear PL011_UART_ICR_*

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

`PL011_UART_ICR_OEIC = (1 shl 10);`	Overrun error interrupt clear
`PL011_UART_ICR_BEIC = (1 shl 9);`	Break error interrupt clear
`PL011_UART_ICR_PEIC = (1 shl 8);`	Parity error interrupt clear
`PL011_UART_ICR_FEIC = (1 shl 7);`	Framing error interrupt clear
`PL011_UART_ICR_RTIC = (1 shl 6);`	Receive timeout interrupt clear
`PL011_UART_ICR_TXIC = (1 shl 5);`	Transmit interrupt clear
`PL011_UART_ICR_RXIC = (1 shl 4);`	Receive interrupt clear
`PL011_UART_ICR_DSRMIC = (1 shl 3);`	Unsupported, write zero, read as don't care.
`PL011_UART_ICR_DCDMIC = (1 shl 2);`	Unsupported, write zero, read as don't care.
`PL011_UART_ICR_CTSMIC = (1 shl 1);`	nUARTCTS modem interrupt clear
`PL011_UART_ICR_RIMIC = (1 shl 0);`	Unsupported, write zero, read as don't care.

PL011 UART DMA Control

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

This register is disabled, writing to it has no effect and reading returns 0.

PL011 UART test control

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

PL011 UART integration test input

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

PL011 UART integration test output

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

PL011 UART test data

See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html

Type definitions

PL011 UART registers

PPL011UARTRegisters = ^TPL011UARTRegisters;

TPL011UARTRegisters = record

Note: Layout of the PL011 registers (See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/I18702.html))
`DR:LongWord;`	Data Register
`RSRECR:LongWord;`	Receive Status Register/Error Clear Register
`Reserved01:LongWord;`
`Reserved02:LongWord;`
`Reserved03:LongWord;`
`Reserved04:LongWord;`
`FR:LongWord;`	Flag register
`Reserved05:LongWord;`
`ILPR:LongWord;`	IrDA Low-Power Counter Register
`IBRD:LongWord;`	Integer Baud rate divisor
`FBRD:LongWord;`	Fractional Baud rate divisor
`LCRH:LongWord;`	Line Control register
`CR:LongWord;`	Control register
`IFLS:LongWord;`	Interrupt FIFO Level Select Register
`IMSC:LongWord;`	Interrupt Mask Set Clear Register
`RIS:LongWord;`	Raw Interrupt Status Register
`MIS:LongWord;`	Masked Interrupt Status Register
`ICR:LongWord;`	Interrupt Clear Register
`DMACR:LongWord;`	DMA Control Register
`Reserved11:LongWord;`
`Reserved12:LongWord;`
`Reserved13:LongWord;`
`Reserved14:LongWord;`
`Reserved15:LongWord;`
`Reserved16:LongWord;`
`Reserved17:LongWord;`
`Reserved18:LongWord;`
`Reserved19:LongWord;`
`Reserved1A:LongWord;`
`Reserved1B:LongWord;`
`Reserved1C:LongWord;`
`Reserved1D:LongWord;`
`ITCR:LongWord;`	Test Control Register
`ITIP:LongWord;`	Integration Test Input Register
`ITOP:LongWord;`	Integration Test Output Register
`TDR:LongWord;`	Test Data Register

PL011 UART properties

PPL011UART = ^TPL011UART;

TPL011UART = record

UART Properties
`UART:TUARTDevice;`
PL011 Properties
`IRQ:LongWord;`
`Lock:TSpinHandle;`	Device lock (Differs from lock in UART device) (Spin lock due to use by interrupt handler)
`ClockRate:LongWord;`	Device clock rate
`Registers:PPL011UARTRegisters;`	Device registers

`Start:LongWord;`	Index of first available buffer entry
`Count:LongWord;`	Number of available entries in the buffer
`Buffer:array[0..(PL011_UART_RX_BUFFER_SIZE - 1)] of Word;`	Buffer for received data (Includes data and status)
Statistics Properties
`InterruptCount:LongWord;`	Number of interrupt requests received by the device

Public variables

PL011 specific variables

`PL011_RX_IRQ_MASK:Boolean = False;`	If True then mask RX interrupts while RX FIFO is not empty (Allows for implementation variations)

Function declarations

PL011 functions

function PL011UARTCreate(Address:PtrUInt; const Name:String; IRQ,ClockRate:LongWord):PUARTDevice;

Description: Create and register a new PL011 UART device which can be accessed using the UART API

Address	The address of the PL011 registers
Name	The text description of this device which will show in the device list (Optional)
IRQ	The interrupt number for the PL011
ClockRate	The clock source frequency for the PL011
Return	Pointer to the new UART device or nil if the UART device could not be created

function PL011UARTDestroy(UART:PUARTDevice):LongWord;

Description: Close, deregister and destroy a PL011 UART device created by this driver

UART	The UART device to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

PL011 UART functions

function PL011UARTOpen(UART:PUARTDevice; BaudRate,DataBits,StopBits,Parity,FlowControl:LongWord):LongWord;

Description: Implementation of UARTDeviceOpen API for PL011 UART

Note	Not intended to be called directly by applications, use UARTDeviceOpen instead.

function PL011UARTClose(UART:PUARTDevice):LongWord;

Description: Implementation of UARTDeviceClose API for PL011 UART

Note	Not intended to be called directly by applications, use UARTDeviceClose instead.

function PL011UARTRead(UART:PUARTDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;

Description: Implementation of UARTDeviceRead API for PL011 UART

Note	Not intended to be called directly by applications, use UARTDeviceRead instead.

function PL011UARTPushRX(UART:PUARTDevice):LongWord;

Description: To be documented

Note	None documented

function PL011UARTWrite(UART:PUARTDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;

Description: Implementation of UARTDeviceWrite API for PL011 UART

Note	Not intended to be called directly by applications, use UARTDeviceWrite instead.

function PL011UARTGetStatus(UART:PUARTDevice):LongWord;

Description: Implementation of UARTDeviceGetStatus API for PL011 UART

Note	Not intended to be called directly by applications, use UARTDeviceGetStatus instead.

function PL011UARTSetStatus(UART:PUARTDevice; Status:LongWord):LongWord;

Description: Implementation of UARTDeviceSetStatus API for PL011 UART

Note	Not intended to be called directly by applications, use UARTDeviceSetStatus instead.

procedure PL011UARTInterruptHandler(UART:PUARTDevice);

Description: Interrupt handler for the PL011 UART device

Note	Not intended to be called directly by applications

procedure PL011UARTReceive(UART:PUARTDevice);

Description: Receive handler for the PL011 UART device

Note	Not intended to be called directly by applications

procedure PL011UARTTransmit(UART:PUARTDevice);

Description: Transmit handler for the PL011 UART device

Note	Not intended to be called directly by applications

procedure PL011UARTEnableInterrupt(UART:PPL011UART; Interrupt:LongWord);

Description: Enable the specified interrupt in the interrupt mask register of a PL011 UART device

UART	The PL011 UART device to enable the interrupt for
Interrupt	The interrupt to enable
Note	Caller must hold the UART lock

procedure PL011UARTDisableInterrupt(UART:PPL011UART; Interrupt:LongWord);

Description: Disable the specified interrupt in the interrupt mask register of a PL011 UART device

Network	The PL011 UART device to disable the interrupt for
Interrupt	The interrupt to disable
Note	Caller must hold the UART lock

Return to Unit Reference

Difference between revisions of "Unit PL011"

Latest revision as of 05:46, 31 August 2021

Contents

Description

Constants

Type definitions

Public variables

Function declarations

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 5: / Line 5: @@
 ----
-''To be documented''
+'''ARM PrimeCell PL011 UART Driver unit'''
 === Constants ===
@@ Line 56: / Line 56: @@
 |-
 | <code>PL011_UART_CLOCK_RATE = 24000000;</code>
+| &nbsp;
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>PL011_UART_RX_POLL_LIMIT = 256;</code>
+| Number of times interrupt handler may poll the read FIFO
+|-
+| <code>PL011_UART_RX_BUFFER_SIZE = 1024;</code>
 | &nbsp;
 |-
@@ Line 62: / Line 70: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART data constants''' <code> PL011_UART_DR_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART data''' <code> PL011_UART_DR_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 83: / Line 91: @@
 |-
 | <code>PL011_UART_DR_DATA = ($FF shl 0);</code>
-| Receive / Transmit data
+| Receive/Transmit data
 |-
 |colspan="2"|<code>PL011_UART_DR_ERROR = PL011_UART_DR_OE or PL011_UART_DR_BE or PL011_UART_DR_PE or PL011_UART_DR_FE;</code>
@@ Line 91: / Line 99: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART receive status/error clear constants''' <code> PL011_UART_RSRECR_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART receive status/error clear''' <code> PL011_UART_RSRECR_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 115: / Line 123: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART flag constants''' <code> PL011_UART_FR_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART flag''' <code> PL011_UART_FR_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 154: / Line 162: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART integer baud rate divisor constants''' <code> PL011_UART_IBRD_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART integer baud rate divisor''' <code> PL011_UART_IBRD_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 169: / Line 177: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART fractional baud rate divisor constants ''' <code> PL011_UART_FBRD_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART fractional baud rate divisor''' <code> PL011_UART_FBRD_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 184: / Line 192: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART line control constants''' <code> PL011_UART_LCRH_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART line control''' <code> PL011_UART_LCRH_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 217: / Line 225: @@
 |-
 | <code>PL011_UART_LCRH_EPS = (1 shl 2);</code>
-| Even parity select (0 = odd parity / 1 = even parity)
+| Even parity select (0 = odd parity/1 = even parity)
 |-
 | <code>PL011_UART_LCRH_PEN = (1 shl 1);</code>
@@ Line 229: / Line 237: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART control constants ''' <code> PL011_UART_CR_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART control''' <code> PL011_UART_CR_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 279: / Line 287: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART interrupt FIFO level select constants''' <code> PL011_UART_IFLS_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART interrupt FIFO level select''' <code> PL011_UART_IFLS_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 297: / Line 305: @@
 |-
 | <code>PL011_UART_IFLS_RXIFLSEL1_8 = (0 shl 3);</code>
-| b000 = Receive FIFO becomes 1/8 full
+| b000 = Receive FIFO becomes >= 1/8 full
 |-
 | <code>PL011_UART_IFLS_RXIFLSEL1_4 = (1 shl 3);</code>
-| b001 = Receive FIFO becomes 1/4 full
+| b001 = Receive FIFO becomes >= 1/4 full
 |-
 | <code>PL011_UART_IFLS_RXIFLSEL1_2 = (2 shl 3);</code>
-| b010 = Receive FIFO becomes 1/2 full
+| b010 = Receive FIFO becomes >= 1/2 full
 |-
 | <code>PL011_UART_IFLS_RXIFLSEL3_4 = (3 shl 3);</code>
-| b011 = Receive FIFO becomes 3/4 full
+| b011 = Receive FIFO becomes >= 3/4 full
 |-
 | <code>PL011_UART_IFLS_RXIFLSEL7_8 = (4 shl 3);</code>
-| b100 = Receive FIFO becomes 7/8 full
+| b100 = Receive FIFO becomes >= 7/8 full
 |-
 | <code>PL011_UART_IFLS_TXIFLSEL = (7 shl 0);</code>
@@ Line 315: / Line 323: @@
 |-
 | <code>PL011_UART_IFLS_TXIFLSEL1_8 = (0 shl 0);</code>
-| b000 = Transmit FIFO becomes 1/8 full
+| b000 = Transmit FIFO becomes <= 1/8 full
 |-
 | <code>PL011_UART_IFLS_TXIFLSEL1_4 = (1 shl 0);</code>
-| b001 = Transmit FIFO becomes 1/4 full
+| b001 = Transmit FIFO becomes <= 1/4 full
 |-
 | <code>PL011_UART_IFLS_TXIFLSEL1_2 = (2 shl 0);</code>
-| b010 = Transmit FIFO becomes 1/2 full
+| b010 = Transmit FIFO becomes <= 1/2 full
 |-
 | <code>PL011_UART_IFLS_TXIFLSEL3_4 = (3 shl 0);</code>
-| b011 = Transmit FIFO becomes 3/4 full
+| b011 = Transmit FIFO becomes <= 3/4 full
 |-
 | <code>PL011_UART_IFLS_TXIFLSEL7_8 = (4 shl 0);</code>
-| b100 = Transmit FIFO becomes 7/8 full
+| b100 = Transmit FIFO becomes <= 7/8 full
 |-
 |}
@@ Line 333: / Line 341: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART interrupt mask set/clear constants''' <code> PL011_UART_IMSC_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART interrupt mask set/clear''' <code> PL011_UART_IMSC_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 378: / Line 386: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART raw interrupt status constants''' <code> PL011_UART_RIS_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART raw interrupt status''' <code> PL011_UART_RIS_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 423: / Line 431: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART masked interrupt status constants''' <code> PL011_UART_MIS_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART masked interrupt status''' <code> PL011_UART_MIS_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 468: / Line 476: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART interrupt clear constants''' <code> PL011_UART_ICR_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART interrupt clear''' <code> PL011_UART_ICR_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 513: / Line 521: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART DMA Control constants'''</div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART DMA Control'''</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 527: / Line 535: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART test control constants'''</div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART test control'''</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 537: / Line 545: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART integration test input constants'''</div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART integration test input'''</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 547: / Line 555: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART integration test output constants'''</div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART integration test output'''</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 557: / Line 565: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART test data constants'''</div>
+<div style="font-size: 14px; padding-left: 12px;">'''PL011 UART test data'''</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 570: / Line 578: @@
 ----
-''To be documented''
+'''PL011 UART registers'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PPL011UARTRegisters = ^TPL011UARTRegisters;</code>
+<code>TPL011UARTRegisters = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|Note: Layout of the PL011 registers (See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/I18702.html))
+|-
+| <code>DR:LongWord;</code>
+| Data Register
+|-
+| <code>RSRECR:LongWord;</code>
+| Receive Status Register/Error Clear Register
+|-
+| <code>Reserved01:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved02:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved03:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved04:LongWord;</code>
+| &nbsp;
+|-
+| <code>FR:LongWord;</code>
+| Flag register
+|-
+| <code>Reserved05:LongWord;</code>
+| &nbsp;
+|-
+| <code>ILPR:LongWord;</code>
+| IrDA Low-Power Counter Register
+|-
+| <code>IBRD:LongWord;</code>
+| Integer Baud rate divisor
+|-
+| <code>FBRD:LongWord;</code>
+| Fractional Baud rate divisor
+|-
+| <code>LCRH:LongWord;</code>
+| Line Control register
+|-
+| <code>CR:LongWord;</code>
+| Control register
+|-
+| <code>IFLS:LongWord;</code>
+| Interrupt FIFO Level Select Register
+|-
+| <code>IMSC:LongWord;</code>
+| Interrupt Mask Set Clear Register
+|-
+| <code>RIS:LongWord;</code>
+| Raw Interrupt Status Register
+|-
+| <code>MIS:LongWord;</code>
+| Masked Interrupt Status Register
+|-
+| <code>ICR:LongWord;</code>
+| Interrupt Clear Register
+|-
+| <code>DMACR:LongWord;</code>
+| DMA Control Register
+|-
+| <code>Reserved11:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved12:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved13:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved14:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved15:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved16:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved17:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved18:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved19:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved1A:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved1B:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved1C:LongWord;</code>
+| &nbsp;
+|-
+| <code>Reserved1D:LongWord;</code>
+| &nbsp;
+|-
+| <code>ITCR:LongWord;</code>
+| Test Control Register
+|-
+| <code>ITIP:LongWord;</code>
+| Integration Test Input Register
+|-
+| <code>ITOP:LongWord;</code>
+| Integration Test Output Register
+|-
+| <code>TDR:LongWord;</code>
+| Test Data Register
+|-
+|}
+</div></div>
+'''PL011 UART properties'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PPL011UART = ^TPL011UART;</code>
+<code>TPL011UART = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|''UART Properties''
+|-
+| <code>UART:TUARTDevice;</code>
+| &nbsp;
+|-
+|colspan="2"|''PL011 Properties''
+|-
+| <code>IRQ:LongWord;</code>
+| &nbsp;
+|-
+| <code>Lock:TSpinHandle;</code>
+| Device lock (Differs from lock in UART device) (Spin lock due to use by interrupt handler)
+|-
+| <code>ClockRate:LongWord;</code>
+| Device clock rate
+|-
+| <code>Registers:PPL011UARTRegisters;</code>
+| Device registers
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>Start:LongWord;</code>
+| Index of first available buffer entry
+|-
+| <code>Count:LongWord;</code>
+| Number of available entries in the buffer
+|-
+| <code>Buffer:array[0..(PL011_UART_RX_BUFFER_SIZE - 1)] of Word;</code>
+| Buffer for received data (Includes data and status)
+|-
+|colspan="2"|''Statistics Properties''
+|-
+| <code>InterruptCount:LongWord;</code>
+| Number of interrupt requests received by the device
+|-
+|}
+</div></div>
+<br />
 === Public variables ===
 ----
-''To be documented''
+'''PL011 specific variables'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>PL011_RX_IRQ_MASK:Boolean = False;</code>
+| style="width: 40%;"|If True then mask RX interrupts while RX FIFO is not empty (Allows for implementation variations)
+|-
+|}
+<br />
 === Function declarations ===
@@ Line 584: / Line 770: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">function PL011UARTCreate(Address:LongWord; const Name:String; IRQ,ClockRate:LongWord):PUARTDevice;</pre>
+<pre style="border: 0; padding-bottom:0px;">function PL011UARTCreate(Address:PtrUInt; const Name:String; IRQ,ClockRate:LongWord):PUARTDevice;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' Create and register a new PL011 UART device which can be accessed using the UART API</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Address'''
+! Address
 | The address of the PL011 registers
 |-
-! '''Name'''
+! Name
 | The text description of this device which will show in the device list (Optional)
 |-
-! '''IRQ'''
+! IRQ
 | The interrupt number for the PL011
 |-
-! '''ClockRate'''
+! ClockRate
 | The clock source frequency for the PL011
 |-
-! '''Return'''
+! Return
 | Pointer to the new UART device or nil if the UART device could not be created
 |-
@@ Line 613: / Line 799: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''UART'''
+! UART
 | The UART device to destroy
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure
 |-
@@ Line 631: / Line 817: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| Not intended to be called directly by applications, use UARTDeviceOpen instead
+| Not intended to be called directly by applications, use UARTDeviceOpen instead.
 |-
 |}
@@ Line 643: / Line 829: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| Not intended to be called directly by applications, use UARTDeviceClose instead
+| Not intended to be called directly by applications, use UARTDeviceClose instead.
 |-
 |}
@@ Line 655: / Line 841: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| Not intended to be called directly by applications, use UARTDeviceRead instead
+| Not intended to be called directly by applications, use UARTDeviceRead instead.
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function PL011UARTPushRX(UART:PUARTDevice):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
 |-
 |}
@@ Line 667: / Line 865: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| Not intended to be called directly by applications, use UARTDeviceWrite instead
+| Not intended to be called directly by applications, use UARTDeviceWrite instead.
 |-
 |}
@@ Line 674: / Line 872: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">function PL011UARTStatus(UART:PUARTDevice):LongWord;</pre>
+<pre style="border: 0; padding-bottom:0px;">function PL011UARTGetStatus(UART:PUARTDevice):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Implementation of UARTDeviceStatus API for PL011 UART</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Implementation of UARTDeviceGetStatus API for PL011 UART</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| Not intended to be called directly by applications, use UARTDeviceStatus instead
+| Not intended to be called directly by applications, use UARTDeviceGetStatus instead.
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function PL011UARTSetStatus(UART:PUARTDevice; Status:LongWord):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Implementation of UARTDeviceSetStatus API for PL011 UART</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Not intended to be called directly by applications, use UARTDeviceSetStatus instead.
 |-
 |}
@@ Line 687: / Line 897: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">procedure PL011UARTInterruptHandler(UART:PUARTDevice);</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Interrupt handler for the PL011 UART device</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| None documented
+| Not intended to be called directly by applications
 |-
 |}
@@ Line 699: / Line 909: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">procedure PL011UARTReceive(UART:PUARTDevice);</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Receive handler for the PL011 UART device</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| None documented
+| Not intended to be called directly by applications
 |-
 |}
@@ Line 711: / Line 921: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">procedure PL011UARTTransmit(UART:PUARTDevice);</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Transmit handler for the PL011 UART device</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| None documented
+| Not intended to be called directly by applications
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure PL011UARTEnableInterrupt(UART:PPL011UART; Interrupt:LongWord);</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Enable the specified interrupt in the interrupt mask register of a PL011 UART device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! UART
+| The PL011 UART device to enable the interrupt for
+|-
+! Interrupt
+| The interrupt to enable
+|-
+! Note
+| Caller must hold the UART lock
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure PL011UARTDisableInterrupt(UART:PPL011UART; Interrupt:LongWord);</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Disable the specified interrupt in the interrupt mask register of a PL011 UART device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Network
+| The PL011 UART device to disable the interrupt for
+|-
+! Interrupt
+| The interrupt to disable
+|-
+! Note
+| Caller must hold the UART lock
 |-
 |}