Difference between revisions of "Unit DMA"

From Ultibo.org
Jump to: navigation, search
 
Line 705: Line 705:
 
|-
 
|-
 
! Note
 
! Note
| Does not check for cache coherency requirements (Shared, Non Cached) only alignment and size. Buffers used as the source of a DMA request do not neccessarily need to meet alignment and size requirements, however buffers used as a destintation must meet these requirements or the caller must take appropriate actions to prevent undesirable side effects from cache invalidation.
+
| Does not check for cache coherency requirements (Shared, Non Cached) only alignment and size. Buffers used as the source of a DMA request do not necessarily need to meet alignment and size requirements, however buffers used as a destination must meet these requirements or the caller must take appropriate actions to prevent undesirable side effects from cache invalidation.
 
|-
 
|-
 
|}
 
|}

Latest revision as of 04:51, 10 October 2023

Return to Unit Reference


Description


Ultibo DMA Interface unit

The DMA interfaces are 1 tier (Host only) whereas the USB interface is 3 tier (Host, Device and Driver).

Constants



DMA specific constants DMA_*
DMA_NAME_PREFIX = 'DMA'; Name prefix for DMA Hosts


DMA host type DMA_TYPE_*
DMA_TYPE_NONE = 0;  
 
DMA_TYPE_MAX = 0;  


DMA host state DMA_STATE_*
DMA_STATE_DISABLED = 0;  
DMA_STATE_ENABLED = 1;  
 
DMA_STATE_MAX = 1;  


DMA host flag DMA_FLAG_*
DMA_FLAG_NONE = $00000000;  
DMA_FLAG_SHARED = $00000001; Host requires data buffers in shared memory
DMA_FLAG_NOCACHE = $00000002; Host requires data buffers in non cached memory
DMA_FLAG_COHERENT = $00000004; Data buffers are cache coherent if allocated according to host configuration
DMA_FLAG_STRIDE = $00000008; Host supports 2D stride on source and/or dest address
DMA_FLAG_DREQ = $00000010; Host supports data request gating (DREQ) on source and/or dest address
DMA_FLAG_NOINCREMENT = $00000020; Host supports no increment on source and/or dest address
DMA_FLAG_NOREAD = $00000040; Host supports no read from source address (write to dest address only) (Zero fill the destination)
DMA_FLAG_NOWRITE = $00000080; Host supports no write to dest address (read from source address only) (Cache fill from the source)
DMA_FLAG_WIDE = $00000100; Host supports wide read and/or write
DMA_FLAG_BULK = $00000200; Host supports bulk transfer
DMA_FLAG_LITE = $00000400; Host supports "lite" transfer
DMA_FLAG_40BIT = $00000800; Host supports 40-bit address transfer


DMA data flag DMA_DATA_FLAG_*
See: Platform DMA_DATA_FLAG_*


DMA request flag DMA_REQUEST_FLAG_*
DMA_REQUEST_FLAG_NONE = $00000000;  
DMA_REQUEST_FLAG_RELEASE = $00000001; If set then release the request automatically after completion
DMA_REQUEST_FLAG_CYCLIC = $00000002; This is a cyclic request which loops around from tail to head
DMA_REQUEST_FLAG_COMPATIBLE = $00000004; If set then all buffers supplied are host configuration compatible (Sizing, Alignment, Flags)


DMA logging DMA_LOG_*
DMA_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG; DMA debugging messages
DMA_LOG_LEVEL_INFO = LOG_LEVEL_INFO; DMA informational messages, such as a device being attached or detached
DMA_LOG_LEVEL_WARN = LOG_LEVEL_WARN; DMA warning messages
DMA_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR; DMA error messages
DMA_LOG_LEVEL_NONE = LOG_LEVEL_NONE; No DMA messages


Type definitions



DMA properties

PDMAProperties = ^TDMAProperties;

TDMAProperties = record

Flags:LongWord; Host flags (eg DMA_FLAG_STRIDE)
Alignment:LongWord; Host data buffer alignment
Multiplier:LongWord; Host data buffer multiplier
Channels:LongWord; Total number of host channels
MaxSize:LongWord; Maximum transfer size
MaxCount:LongWord; Maximum Y count for 2D stride
MaxLength:LongWord; Maximum X length for 2D stride
MinStride:LongInt; Minimum stride value (Increment between rows) May be negative.
MaxStride:LongWord; Maximum stride value (Increment between rows)

DMA enumeration callback

TDMAEnumerate = function(DMA:PDMAHost; Data:Pointer):LongWord;

DMA notification callback

TDMANotification = function(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;

DMA host start

TDMAHostStart = function(DMA:PDMAHost):LongWord;

DMA host stop

TDMAHostStop = function(DMA:PDMAHost):LongWord;

DMA host reset

TDMAHostReset = function(DMA:PDMAHost):LongWord;

DMA host submit

TDMAHostSubmit = function(DMA:PDMAHost; Request:PDMARequest):LongWord;

DMA host cancel

TDMAHostCancel = function(DMA:PDMAHost; Request:PDMARequest):LongWord;

DMA host properties

TDMAHostProperties = function(DMA:PDMAHost; Properties:PDMAProperties):LongWord;

DMA host

PDMAHost = ^TDMAHost;

TDMAHost = record

Device Properties
Device:TDevice; The Device entry for this DMA host
DMA Properties
DMAId:LongWord; Unique Id of this DMA host in the DMA host table
DMAId:LongWord; Unique Id of this DMA host in the DMA host table
DMAState:LongWord; DMA state (eg DMA_STATE_ENABLED)
HostStart:TDMAHostStart; A Host specific HostStart method implementing the standard DMA host interface (Mandatory)
HostStop:TDMAHostStop; A Host specific HostStop method implementing the standard DMA host interface (Mandatory)
HostReset:TDMAHostReset; A Host specific HostReset method implementing the standard DMA host interface (Or nil if the default method is suitable)
HostSubmit:TDMAHostSubmit; A Host specific HostSubmit method implementing the standard DMA host interface (Mandatory)
HostCancel:TDMAHostCancel; A Host specific HostCancel method implementing the standard DMA host interface (Mandatory)
HostProperties:TDMAHostProperties; A Host specific HostProperties method implementing the standard DMA host interface (Or nil if the default method is suitable)
Driver Properties
Lock:TMutexHandle; Host lock
Alignment:LongWord; Host data buffer alignment
Multiplier:LongWord; Host data buffer multiplier
Properties:TDMAProperties; Host properties
LastError:LongWord; Last error to occur on this host
PendingCount:LongWord; Number of DMA requests pending for this host
WaiterThread:TThreadId; Thread waiting for pending requests to complete
Statistics Properties
RequestCount:LongWord; Number of DMA requests that have been submitted to this host
RequestErrors:LongWord; Number of DMA requests that have failed on this host
Internal Properties
Prev:PDMAHost; Previous entry in DMA host table
Next:PDMAHost; Next entry in DMA host table

DMA request completed

TDMARequestCompleted = procedure(Request:PDMARequest);

DMA request

PDMARequest = ^TDMARequest;

TDMARequest = record

Note: Forward declared to satisfy DMAHost
Request Properties
Host:PDMAHost;  
Data:PDMAData; List of data blocks for this request
Flags:LongWord; Flags for the request (eg DMA_REQUEST_FLAG_RELEASE)
Direction:LongWord; The direction of the DMA request (eg DMA_DIR_MEM_TO_MEM)
Peripheral:LongWord; The peripheral ID for data request gating (eg DMA_DREQ_ID_NONE)
Callback:TDMARequestCompleted; Callback function that will be called when this DMA request has been successfully completed or has failed
DriverData:Pointer; Private data for the completion callback (Optional)
Result Properties
Status:LongWord; Status of the request (ERROR_SUCCESS if successful, or another error code if the request failed)
Driver Properties (Private variables for use by Host drivers)
ControlBlocks:Pointer;  


Public variables



DMA logging

DMA_DEFAULT_LOG_LEVEL:LongWord = DMA_LOG_LEVEL_DEBUG; Minimum level for DMA messages. Only messages with level greater than or equal to this will be printed.
DMA_LOG_ENABLED:Boolean;


Function declarations



Initialization functions

procedure DMAInit;
Description: To be documented
Note None documented


DMA host functions

function DMAHostStart(DMA:PDMAHost):LongWord;
Description: To be documented
Note None documented


function DMAHostStop(DMA:PDMAHost):LongWord;
Description: To be documented
Note None documented


function DMAHostReset(DMA:PDMAHost):LongWord;
Description: To be documented
Note None documented


function DMAHostProperties(DMA:PDMAHost; Properties:PDMAProperties):LongWord;
Description: To be documented
Note None documented


function DMAHostCreate:PDMAHost;
Description: Create a new DMA entry
Return Pointer to new DMA entry or nil if DMA could not be created


function DMAHostCreateEx(Size:LongWord):PDMAHost;
Description: Create a new DMA entry
Size Size in bytes to allocate for new DMA (Including the DMA entry)
Return Pointer to new DMA entry or nil if DMA could not be created


function DMAHostDestroy(DMA:PDMAHost):LongWord;
Description: Destroy an existing DMA entry
Note None documented


function DMAHostRegister(DMA:PDMAHost):LongWord;
Description: Register a new DMA in the DMA host table
Note None documented


function DMAHostDeregister(DMA:PDMAHost):LongWord;
Description: Deregister a DMA from the DMA host table
Note None documented


function DMAHostFind(DMAId:LongWord):PDMAHost;
Description: To be documented
Note None documented


function DMAHostEnumerate(Callback:TDMAEnumerate; Data:Pointer):LongWord;
Description: To be documented
Note None documented


function DMAHostNotification(DMA:PDMAHost; Callback:TDMANotification; Data:Pointer; Notification,Flags:LongWord):LongWord;
Description: To be documented
Note None documented


DMA data functions

function DMADataCount(Data:PDMAData):LongWord;
Description: Return the total number of data blocks in the linked list
Note None documented


function DMADataFlags(Data:PDMAData):LongWord;
Description: Return the combined flags of the data blocks in the linked list
Note None documented


function DMADataMaximum(Data:PDMAData):LongWord;
Description: Return the size of the largest data block in the linked list
Note None documented


DMA buffer functions

function DMABufferAllocate(DMA:PDMAHost; Size:LongWord):Pointer; inline;
Description: Allocate a data buffer for a DMA request
DMA The DMA host that the request will be sent to
Size The size of the data buffer to allocate
Return The newly allocated buffer or nil on failure


function DMABufferAllocateEx(DMA:PDMAHost; var Size:LongWord):Pointer;
Description: Allocate a data buffer for a DMA request
DMA The DMA host that the request will be sent to
Size The size of the data buffer to allocate (Updated on return to actual size)
Return The newly allocated buffer or nil on failure
Note This differs from DMABufferAllocate in that it updates the size value to reflect the actual size of the buffer allocated which may be required for some uses


function DMABufferValidate(DMA:PDMAHost; Buffer:Pointer; Size:LongWord):LongWord;
Description: Validate a data buffer for a DMA request against the DMA host requirements
DMA The DMA host that the request will be sent to
Buffer The data buffer to validate
Size The size of the data buffer
Return ERROR_SUCCESS on success or another error code on failure (ERROR_NOT_COMPATIBLE if not compatible with host)
Note Does not check for cache coherency requirements (Shared, Non Cached) only alignment and size. Buffers used as the source of a DMA request do not necessarily need to meet alignment and size requirements, however buffers used as a destination must meet these requirements or the caller must take appropriate actions to prevent undesirable side effects from cache invalidation.


function DMABufferRelease(Buffer:Pointer):LongWord;
Description: Release a data buffer from a DMA request
Data The buffer to be released
Return ERROR_SUCCESS on success or another error code on failure


DMA request functions

function DMARequestAllocate(DMA:PDMAHost; Data:PDMAData; Callback:TDMARequestCompleted; DriverData:Pointer; Direction,Peripheral,Flags:LongWord):PDMARequest;
Description: Allocate a new DMA request
DMA The DMA host this request will be sent to
Data A linked list of DMA data blocks for the transfer (Optional)
Callback The callback function to be called on completion of the request
DriverData Driver private data for the callback (Optional)
Direction The direction of the DMA request (eg DMA_DIR_MEM_TO_MEM)
Peripheral The peripheral ID for data request gating (eg DMA_DREQ_ID_NONE)
Flags Additional flags for this request (eg DMA_REQUEST_FLAG_CYCLIC)
Return The newly allocated request or nil on failure


function DMARequestRelease(Request:PDMARequest):LongWord;
Description: Release and destroy a DMA request
Request The request to be released
Return ERROR_SUCCESS on success or another error code on failure


function DMARequestSubmit(Request:PDMARequest):LongWord;
Description: Submit a DMA request to a DMA host
Request The request to be submitted
Return ERROR_SUCCESS if completed or another error code on failure
Note The request will be completed asynchronously by the DMA host and the completion callback will be called when the request has either succeeded or failed


function DMARequestCancel(Request:PDMARequest):LongWord;
Description: Cancel a DMA request previously submitted to a DMA host
Request The request to be cancelled
Return ERROR_SUCCESS if completed or another error code on failure


procedure DMARequestComplete(Request:PDMARequest);
Description: Called by a DMA host when a DMA request completes
Request The DMA request which has completed
Note DMA host drivers may call this on a worker thread


DMA transfer functions

function DMATransferRequest(DMA:PDMAHost; Data:PDMAData; Direction,Peripheral,Flags,Timeout:LongWord):LongWord;
Description: Perform a DMA transfer request with the supplied data blocks on the supplied host
DMA The DMA host to execute the request on
Data A linked list of DMA data blocks for the transfer
Direction The direction of the DMA request (eg DMA_DIR_MEM_TO_MEM)
Peripheral The peripheral ID for data request gating (eg DMA_DREQ_ID_NONE)
Flags Additional flags for this transfer request (eg DMA_REQUEST_FLAG_CYCLIC)
Timeout Milliseconds to wait for request to complete (INFINITE to wait forever)
Note An internal callback will be specified and the function will wait for the transfer to complete


function DMATransferRequestEx(DMA:PDMAHost; Data:PDMAData; Callback:TDMARequestCompleted; DriverData:Pointer; Direction,Peripheral,Flags:LongWord):LongWord;
Description: Perform a DMA transfer request with the supplied data blocks on the supplied host
DMA The DMA host to execute the request on
Data A linked list of DMA data blocks for the transfer
Callback The callback function to be called on completion of the request
DriverData Driver private data for the callback (Optional)
Direction The direction of the DMA request (eg DMA_DIR_MEM_TO_MEM)
Peripheral The peripheral ID for data request gating (eg DMA_DREQ_ID_NONE)
Flags Additional flags for this transfer request (eg DMA_REQUEST_FLAG_CYCLIC)
Note The request will be passed to the callback with the DriverData field set to the DriverData passed to this function. On completion of the callback the request will automatically be released by the internal callback handler.


procedure DMATransferRequestComplete(Request:PDMARequest);
Description: Called when a DMA transfer request completes
Request The DMA request which has completed
Note This is the internal callback for DMATransferRequest


RTL DMA functions

function SysDMAAvailable:Boolean;
Description: Check if a DMA host is available
Note None documented


function SysDMATransfer(Data:PDMAData; Direction,Peripheral:LongWord):LongWord;
Description: Perform a DMA transfer using the list of DMA data blocks provided
Data A linked list of DMA data blocks for the transfer
Direction The direction of the DMA request (eg DMA_DIR_MEM_TO_MEM)
Peripheral The peripheral ID for data request gating (eg DMA_DREQ_ID_NONE)


function SysDMAFillMemory(Dest:Pointer; Size:LongWord; Value:Byte):LongWord;
Description: Fill memory at the destination address using DMA
Dest The address to start the memory fill
Size The size of memory to fill in bytes
Value The value to fill the memory with


function SysDMACopyMemory(Source,Dest:Pointer; Size:LongWord):LongWord;
Description: Copy memory from the source to the destination address using DMA
Source The source address to start the memory copy
Dest The destination address to start the memory copy
Size The size of memory to copy in bytes


function SysDMAReadPeripheral(Address,Dest:Pointer; Size,Peripheral:LongWord):LongWord;
Description: Read from a periperal address to the destination address using DMA
Address The address of the periperhal register to read from
Dest The destination address to start writing to
Size The size of the read in bytes
Peripheral The peripheral ID for data request gating (eg DMA_DREQ_ID_UART_RX)


function SysDMAWritePeripheral(Source,Address:Pointer; Size,Peripheral:LongWord):LongWord;
Description: Write to a peripheral address from the source address using DMA
Source The source address to start reading from
Address The address of the peripheral register to write to
Size The size of the write in bytes
Peripheral The peripheral ID for data request gating (eg DMA_DREQ_ID_UART_TX)


function SysDMAAllocateBuffer(Size:LongWord):Pointer;
Description: Allocate a buffer compatible with DMA memory reads or writes
Size The size of the buffer to allocate


function SysDMAAllocateBufferEx(var Size:LongWord):Pointer;
Description: Allocate a buffer compatible with DMA memory reads or writes
Size The size of the buffer to allocate (Updated on return to actual size)


function SysDMAReleaseBuffer(Buffer:Pointer):LongWord;
Description: Release a buffer allocated with DMAAllocateBuffer
Buffer The buffer to be released


DMA helper functions

function DMAGetCount:LongWord;
Description: Get the current DMA host count
Note None documented


function DMAHostGetDefault:PDMAHost;
Description: Get the current default DMA host
Note None documented


function DMAHostSetDefault(DMA:PDMAHost):LongWord;
Description: Set the current default DMA device
Note None documented


function DMAHostCheck(DMA:PDMAHost):PDMAHost;
Description: Check if the supplied DMA is in the DMA host table
Note None documented


function DMATypeToString(DMAType:LongWord):String;
Description: Convert a DMA type value to a string
Note None documented


function DMAStateToString(DMAState:LongWord):String;
Description: Convert a DMA state value to a string
Note None documented


procedure DMALog(Level:Integer; DMA:PDMAHost; const AText:String);
Description: To be documented
Note None documented


procedure DMALogInfo(DMA:PDMAHost; const AText:String); inline;
Description: To be documented
Note None documented


procedure DMALogWarn(DMA:PDMAHost; const AText:String); inline;
Description: To be documented
Note None documented


procedure DMALogError(DMA:PDMAHost; const AText:String); inline;
Description: To be documented
Note None documented


procedure DMALogDebug(DMA:PDMAHost; const AText:String); inline;
Description: To be documented
Note None documented


Return to Unit Reference