Unit MMC

From Ultibo.org
Jump to: navigation, search

Return to Unit Reference


Description


Ultibo MMC/SD/SDIO Interface unit

This unit implements the standards based part of the SD/MMC specification including the standard SDHCI interfaces.

For each platform a SDHCI module needs to be provided that implements the platform specific parts of the SDHCI interface.

A fully standards compliant SDHCI host controller needs only a procedure to register it with the SD/MMC core and it can operate using the standard functions provided in this unit, any deviations from the standard will require custom functions to be provided to override the standard functionality.

This is similar in model to USB and other interfaces in Ultibo, where the generic interface unit requires a platform specific module to register with it in order to communicate with platform specific devices.

The SD/MMC interfaces are normally 2 tier (ie Host and Device) whereas the USB interface is 3 tier (Host, Device and Driver) however SDIO support adds a driver model to encapsulate support for device functions which can provide a variety of functionality including WiFi, Bluetooth, Ethernet and others.

Constants



MMC specific constants MMC_*
MMC_NAME_PREFIX = 'MMC'; Name prefix for MMC Devices
 
MMC_DEVICE_DESCRIPTION = 'MMC/SD Device'; Description of MMC/SD device
MMC_STORAGE_DESCRIPTION = 'MMC/SD Storage Device'; Description of MMC/SD storage device
 
MMC_STATUS_TIMER_INTERVAL = 1000;  
 
MMC_DEFAULT_BLOCKSIZE = 512;  
MMC_DEFAULT_BLOCKSHIFT = 9;  


MMC device type MMC_TYPE_*
MMC_TYPE_NONE = 0;  
MMC_TYPE_MMC = 1; An MMC specification card
MMC_TYPE_SD = 2; An SD specification card
MMC_TYPE_SDIO = 3; An SDIO specification card
MMC_TYPE_SD_COMBO = 4; An SD/SDIO combination card
 
MMC_TYPE_MAX = 4;  


MMC device state MMC_STATE_*
MMC_STATE_EJECTED = 0;  
MMC_STATE_INSERTED = 1;  
 
MMC_STATE_MAX = 1;  


MMC device flag MMC_FLAG_*
MMC_FLAG_NONE = $00000000;  
MMC_FLAG_CARD_PRESENT = $00000001; Card is present
MMC_FLAG_WRITE_PROTECT = $00000002; Card is write protected
MMC_FLAG_HIGH_CAPACITY = $00000004; High Capacity (SDHC)
MMC_FLAG_EXT_CAPACITY = $00000008; Extended Capacity (SDXC)
MMC_FLAG_UHS_I = $00000010; Ultra High Speed (UHS-I)
MMC_FLAG_UHS_II = $00000020; Ultra High Speed (UHS-II)
MMC_FLAG_BLOCK_ADDRESSED = $00000040; Block Addressed (SDHC/SDXC and others)
MMC_FLAG_AUTO_BLOCK_COUNT = $00000080; Controller supports Auto CMD23 (Set Block Count)
MMC_FLAG_AUTO_COMMAND_STOP = $00000100; Controller supports Auto CMD12 (Stop Transmission)
MMC_FLAG_DDR_MODE = $00000200; Device supports DDR mode
MMC_FLAG_NON_REMOVABLE = $00000400; Device is non removable, only check for presence once.


MMC/SD status code MMC_STATUS_*
MMC_STATUS_SUCCESS = 0; Function successful
MMC_STATUS_TIMEOUT = 1; The operation timed out
MMC_STATUS_NO_MEDIA = 2; No media present in device
MMC_STATUS_HARDWARE_ERROR = 3; Hardware error of some form occurred
MMC_STATUS_INVALID_DATA = 4; Invalid data was received
MMC_STATUS_INVALID_PARAMETER = 5; An invalid parameter was passed to the function
MMC_STATUS_INVALID_SEQUENCE = 6; Invalid sequence encountered
MMC_STATUS_OUT_OF_MEMORY = 7; No memory available for operation
MMC_STATUS_UNSUPPORTED_REQUEST = 8; The request is unsupported
MMC_STATUS_NOT_PROCESSED = 9; The MMC transfer has not yet been processed
MMC_STATUS_OPERATION_FAILED = 10; The operation was not able to be completed
MMC_STATUS_DEVICE_DETACHED = 11; SDIO device was detached
MMC_STATUS_DEVICE_UNSUPPORTED = 12; SDIO device is unsupported by the driver
MMC_STATUS_NOT_BOUND = 13; SDIO device is not bound to a driver
MMC_STATUS_ALREADY_BOUND = 14; SDIO device is already bound to a driver
MMC_STATUS_NOT_READY = 15; The device is not ready yet, retry again later.


MMC/SD/SDIO version SDIO_VERSION_*, SD_VERSION_*, MMC_VERSION_*
SDIO_VERSION_SDIO = $00040000;  
SDIO_VERSION_1_00 = (SDIO_VERSION_SDIO or $0100);  
SDIO_VERSION_1_10 = (SDIO_VERSION_SDIO or $010a);  
SDIO_VERSION_1_20 = (SDIO_VERSION_SDIO or $0114);  
SDIO_VERSION_2_00 = (SDIO_VERSION_SDIO or $0200);  
SDIO_VERSION_3_00 = (SDIO_VERSION_SDIO or $0300);  
 
SD_VERSION_SD = $00020000;  
SD_VERSION_1_0 = (SD_VERSION_SD or $0100);  
SD_VERSION_1_10 = (SD_VERSION_SD or $010a);  
SD_VERSION_2 = (SD_VERSION_SD or $0200);  
SD_VERSION_3 = (SD_VERSION_SD or $0300);  
SD_VERSION_4 = (SD_VERSION_SD or $0400);  
 
MMC_VERSION_MMC = $00010000;  
MMC_VERSION_1_2 = (MMC_VERSION_MMC or $0102);  
MMC_VERSION_1_4 = (MMC_VERSION_MMC or $0104);  
MMC_VERSION_2_2 = (MMC_VERSION_MMC or $0202);  
MMC_VERSION_3 = (MMC_VERSION_MMC or $0300);  
MMC_VERSION_4 = (MMC_VERSION_MMC or $0400);  
MMC_VERSION_4_1 = (MMC_VERSION_MMC or $0401);  
MMC_VERSION_4_2 = (MMC_VERSION_MMC or $0402);  
MMC_VERSION_4_3 = (MMC_VERSION_MMC or $0403);  
MMC_VERSION_4_41 = (MMC_VERSION_MMC or $0429);  
MMC_VERSION_4_5 = (MMC_VERSION_MMC or $0405);  
MMC_VERSION_5_0 = (MMC_VERSION_MMC or $0500);  
MMC_VERSION_UNKNOWN = (MMC_VERSION_MMC);  


MMC/SD capabilities MMC_CAP_*
From: /include/linux/mmc/host.h
 
MMC_CAP_4_BIT_DATA = (1 shl 0); Can the host do 4 bit transfers
MMC_CAP_MMC_HIGHSPEED = (1 shl 1); Can do MMC high-speed timing
MMC_CAP_SD_HIGHSPEED = (1 shl 2); Can do SD high-speed timing
MMC_CAP_SDIO_IRQ = (1 shl 3); Can signal pending SDIO IRQs
MMC_CAP_SPI = (1 shl 4); Talks only SPI protocols
MMC_CAP_NEEDS_POLL = (1 shl 5); Needs polling for card-detection
MMC_CAP_8_BIT_DATA = (1 shl 6); Can the host do 8 bit transfers
MMC_CAP_AGGRESSIVE_PM = (1 shl 7); Suspend = (e)MMC/SD at idle
MMC_CAP_NONREMOVABLE = (1 shl 8); Nonremovable eg. eMMC
MMC_CAP_WAIT_WHILE_BUSY = (1 shl 9); Waits while card is busy
MMC_CAP_3_3V_DDR = (1 shl 11); Host supports eMMC DDR 3.3V
MMC_CAP_1_8V_DDR = (1 shl 12); Host supports eMMC DDR 1.8V
MMC_CAP_1_2V_DDR = (1 shl 13); Host supports eMMC DDR 1.2V
MMC_CAP_DDR = (MMC_CAP_3_3V_DDR or MMC_CAP_1_8V_DDR or MMC_CAP_1_2V_DDR);  
MMC_CAP_POWER_OFF_CARD = (1 shl 14); Can power off after boot
MMC_CAP_BUS_WIDTH_TEST = (1 shl 15); CMD14/CMD19 bus width ok
MMC_CAP_UHS_SDR12 = (1 shl 16); Host supports UHS SDR12 mode
MMC_CAP_UHS_SDR25 = (1 shl 17); Host supports UHS SDR25 mode
MMC_CAP_UHS_SDR50 = (1 shl 18); Host supports UHS SDR50 mode
MMC_CAP_UHS_SDR104 = (1 shl 19); Host supports UHS SDR104 mode
MMC_CAP_UHS_DDR50 = (1 shl 20); Host supports UHS DDR50 mode
MMC_CAP_UHS = (MMC_CAP_UHS_SDR12 or MMC_CAP_UHS_SDR25 or MMC_CAP_UHS_SDR50 or MMC_CAP_UHS_SDR104 or MMC_CAP_UHS_DDR50);  
MMC_CAP_SYNC_RUNTIME_PM = (1 shl 21); Synced runtime PM suspends
MMC_CAP_NEED_RSP_BUSY = (1 shl 22); Commands with R1B can't use R1
MMC_CAP_DRIVER_TYPE_A = (1 shl 23); Host supports Driver Type A
MMC_CAP_DRIVER_TYPE_C = (1 shl 24); Host supports Driver Type C
MMC_CAP_DRIVER_TYPE_D = (1 shl 25); Host supports Driver Type D
MMC_CAP_DONE_COMPLETE = (1 shl 27); RW reqs can be completed within mmc_request_done()
MMC_CAP_CD_WAKE = (1 shl 28); Enable card detect wake
MMC_CAP_CMD_DURING_TFR = (1 shl 29); Commands during data transfer
MMC_CAP_CMD23 = (1 shl 30); CMD23 supported
MMC_CAP_HW_RESET = (1 shl 31); Reset the eMMC card via RST_n


MMC/SD capabilities2 MMC_CAP2_*
From: /include/linux/mmc/host.h
 
MMC_CAP2_BOOTPART_NOACC = (1 shl 0); Boot partition no access
MMC_CAP2_FULL_PWR_CYCLE = (1 shl 2); Can do full power cycle
MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND = (1 shl 3); Can do full power cycle in suspend
MMC_CAP2_HS200_1_8V_SDR = (1 shl 5); Can support HS200 1.8V
MMC_CAP2_HS200_1_2V_SDR = (1 shl 6); Can support HS200 1.2V
MMC_CAP2_HS200 = (MMC_CAP2_HS200_1_8V_SDR or MMC_CAP2_HS200_1_2V_SDR);  
MMC_CAP2_CD_ACTIVE_HIGH = (1 shl 10); Card-detect signal active high
MMC_CAP2_RO_ACTIVE_HIGH = (1 shl 11); Write-protect signal active high
MMC_CAP2_NO_PRESCAN_POWERUP = (1 shl 14); Don't power up before scan
MMC_CAP2_HS400_1_8V = (1 shl 15); Can support HS400 1.8V
MMC_CAP2_HS400_1_2V = (1 shl 16); Can support HS400 1.2V
MMC_CAP2_HS400 = (MMC_CAP2_HS400_1_8V or MMC_CAP2_HS400_1_2V);  
MMC_CAP2_HSX00_1_8V = (MMC_CAP2_HS200_1_8V_SDR or MMC_CAP2_HS400_1_8V);  
MMC_CAP2_HSX00_1_2V = (MMC_CAP2_HS200_1_2V_SDR or MMC_CAP2_HS400_1_2V);  
MMC_CAP2_SDIO_IRQ_NOTHREAD = (1 shl 17); Don't create a thread to poll for SDIO IRQ
MMC_CAP2_NO_WRITE_PROTECT = (1 shl 18); No physical write protect pin, assume that card is always read-write
MMC_CAP2_NO_SDIO = (1 shl 19); Do not send SDIO commands during initialization
MMC_CAP2_HS400_ES = (1 shl 20); Host supports enhanced strobe
MMC_CAP2_NO_SD = (1 shl 21); Do not send SD commands during initialization
MMC_CAP2_NO_MMC = (1 shl 22); Do not send = (e)MMC commands during initialization
MMC_CAP2_CQE = (1 shl 23); Has eMMC command queue engine
MMC_CAP2_CQE_DCMD = (1 shl 24); CQE can issue a direct command
MMC_CAP2_AVOID_3_3V = (1 shl 25); Host must negotiate down from 3.3V
MMC_CAP2_MERGE_CAPABLE = (1 shl 26); Host can merge a segment over the segment size


MMC/SD direction MMC_DATA_*
MMC_DATA_READ = 1;  
MMC_DATA_WRITE = 2;  


MMC/SD bus width MMC_BUS_WIDTH_*
MMC_BUS_WIDTH_1 = 0;  
MMC_BUS_WIDTH_4 = 2;  
MMC_BUS_WIDTH_8 = 3;  


MMC bus speed (Hz) MMC_BUS_SPEED_*
MMC_BUS_SPEED_DEFAULT = 0;  
MMC_BUS_SPEED_HS26 = 26000000;  
MMC_BUS_SPEED_HS52 = 52000000;  
MMC_BUS_SPEED_DDR = 52000000;  
MMC_BUS_SPEED_HS200 = 200000000;  


MMC/SD timing MMC_TIMING_*
From: /include/linux/mmc/host.h
 
MMC_TIMING_LEGACY = 0;  
MMC_TIMING_MMC_HS = 1;  
MMC_TIMING_SD_HS = 2;  
MMC_TIMING_UHS_SDR12 = 3;  
MMC_TIMING_UHS_SDR25 = 4;  
MMC_TIMING_UHS_SDR50 = 5;  
MMC_TIMING_UHS_SDR104 = 6;  
MMC_TIMING_UHS_DDR50 = 7;  
MMC_TIMING_MMC_DDR52 = 8;  
MMC_TIMING_MMC_HS200 = 9;  
MMC_TIMING_MMC_HS400 = 10;  


MMC/SD signal voltage MMC_SIGNAL_VOLTAGE_*
From: /include/linux/mmc/host.h
 
MMC_SIGNAL_VOLTAGE_330 = 0;  
MMC_SIGNAL_VOLTAGE_180 = 1;  
MMC_SIGNAL_VOLTAGE_120 = 2;  


MMC/SD set driver type MMC_SET_DRIVER_TYPE_*
From: /include/linux/mmc/host.h
 
MMC_SET_DRIVER_TYPE_B = 0;  
MMC_SET_DRIVER_TYPE_A = 1;  
MMC_SET_DRIVER_TYPE_C = 2;  
MMC_SET_DRIVER_TYPE_D = 3;  


MMC command MMC_CMD_*
From: /include/linux/mmc/mmc.h
 
Class 1
MMC_CMD_GO_IDLE_STATE = 0;  
MMC_CMD_SEND_OP_COND = 1;  
MMC_CMD_ALL_SEND_CID = 2;  
MMC_CMD_SET_RELATIVE_ADDR = 3;  
MMC_CMD_SET_DSR = 4;  
MMC_CMD_SLEEP_AWAKE = 5;  
MMC_CMD_SWITCH = 6;  
MMC_CMD_SELECT_CARD = 7;  
MMC_CMD_SEND_EXT_CSD = 8;  
MMC_CMD_SEND_CSD = 9;  
MMC_CMD_SEND_CID = 10;  
MMC_CMD_READ_DAT_UNTIL_STOP = 11;  
MMC_CMD_STOP_TRANSMISSION = 12;  
MMC_CMD_SEND_STATUS = 13;  
MMC_CMD_BUS_TEST_R = 14;  
MMC_CMD_GO_INACTIVE_STATE = 15;  
MMC_CMD_BUS_TEST_W = 19;  
MMC_CMD_SPI_READ_OCR = 58;  
MMC_CMD_SPI_CRC_ON_OFF = 59;  
 
Class 2
MMC_CMD_SET_BLOCKLEN = 16;  
MMC_CMD_READ_SINGLE_BLOCK = 17;  
MMC_CMD_READ_MULTIPLE_BLOCK = 18;  
MMC_CMD_SEND_TUNING_BLOCK = 19;  
MMC_CMD_SEND_TUNING_BLOCK_HS200 = 21;  
 
Class 3
MMC_CMD_WRITE_DAT_UNTIL_STOP = 20;  
 
Class 4
MMC_CMD_SET_BLOCK_COUNT = 23;  
MMC_CMD_WRITE_SINGLE_BLOCK = 24;  
MMC_CMD_WRITE_MULTIPLE_BLOCK = 25;  
MMC_CMD_PROGRAM_CID = 26;  
MMC_CMD_PROGRAM_CSD = 27;  
 
Class 6
MMC_CMD_SET_WRITE_PROT = 28;  
MMC_CMD_CLR_WRITE_PROT = 29;  
MMC_CMD_SEND_WRITE_PROT = 30;  
 
Class 5
MMC_CMD_ERASE_GROUP_START = 35;  
MMC_CMD_ERASE_GROUP_END = 36;  
MMC_CMD_ERASE = 38;  
 
Class 9
MMC_CMD_FAST_IO = 39;  
MMC_CMD_GO_IRQ_STATE = 40;  
 
Class 7
MMC_CMD_LOCK_UNLOCK = 42;  
 
Class 8
MMC_CMD_APP_CMD = 55;  
MMC_CMD_GEN_CMD = 56;  
MMC_CMD_RES_MAN = 62;  
 
MMC_CMD62_ARG1 = $EFAC62EC;  
MMC_CMD62_ARG2 = $00CBAEA7;  


MMC response type MMC_RSP_*
From: /include/linux/mmc/mmc.h
 
Native
MMC_RSP_PRESENT = (1 shl 0);  
MMC_RSP_136 = (1 shl 1); 136 bit response
MMC_RSP_CRC = (1 shl 2); Expect valid crc
MMC_RSP_BUSY = (1 shl 3); Card may send busy
MMC_RSP_OPCODE = (1 shl 4); Response contains opcode
 
These are the native response types, and correspond to valid bit patterns of the above flags. One additional valid pattern is all zeros, which means we don't expect a response.
MMC_RSP_NONE = (0);  
MMC_RSP_R1 = (MMC_RSP_PRESENT or MMC_RSP_CRC or MMC_RSP_OPCODE);  
MMC_RSP_R1B = (MMC_RSP_PRESENT or MMC_RSP_CRC or MMC_RSP_OPCODE or MMC_RSP_BUSY);  
MMC_RSP_R2 = (MMC_RSP_PRESENT or MMC_RSP_136 or MMC_RSP_CRC);  
MMC_RSP_R3 = (MMC_RSP_PRESENT);  
MMC_RSP_R4 = (MMC_RSP_PRESENT);  
MMC_RSP_R5 = (MMC_RSP_PRESENT or MMC_RSP_CRC or MMC_RSP_OPCODE);  
MMC_RSP_R6 = (MMC_RSP_PRESENT or MMC_RSP_CRC or MMC_RSP_OPCODE);  
MMC_RSP_R7 = (MMC_RSP_PRESENT or MMC_RSP_CRC or MMC_RSP_OPCODE);  


MMC non-SPI command MMC_CMD_*
MMC_CMD_MASK = (3 shl 5);  
MMC_CMD_AC = (0 shl 5); Addressed Command, no Data
MMC_CMD_ADTC = (1 shl 5); Addressed Data Transfer Command
MMC_CMD_BC = (2 shl 5); Broadcast Command, no Response
MMC_CMD_BCR = (3 shl 5); Broadcast Command with Response


MMC SPI response type MMC_RSP_SPI_*
MMC_RSP_SPI_S1 = (1 shl 7); One status byte
MMC_RSP_SPI_S2 = (1 shl 8); Second byte
MMC_RSP_SPI_B4 = (1 shl 9); Four data bytes
MMC_RSP_SPI_BUSY = (1 shl 10); Card may send busy
 
These are the SPI response types for MMC, SD, and SDIO cards. Commands return R1, with maybe more info. Zero is an error type, callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
MMC_RSP_SPI_R1 = (MMC_RSP_SPI_S1);  
MMC_RSP_SPI_R1B = (MMC_RSP_SPI_S1 or MMC_RSP_SPI_BUSY);  
MMC_RSP_SPI_R2 = (MMC_RSP_SPI_S1 or MMC_RSP_SPI_S2);  
MMC_RSP_SPI_R3 = (MMC_RSP_SPI_S1 or MMC_RSP_SPI_B4);  
MMC_RSP_SPI_R4 = (MMC_RSP_SPI_S1 or MMC_RSP_SPI_B4);  
MMC_RSP_SPI_R5 = (MMC_RSP_SPI_S1 or MMC_RSP_SPI_S2);  
MMC_RSP_SPI_R7 = (MMC_RSP_SPI_S1 or MMC_RSP_SPI_B4);  


MMC response value MMC_RSP_R1_*, MMC_RSP_R2_*
R1 - MMC status in R1, for native mode (SPI bits are different)
MMC_RSP_R1_OUT_OF_RANGE = (1 shl 31);  
MMC_RSP_R1_ADDRESS_ERROR = (1 shl 30);  
MMC_RSP_R1_BLOCK_LEN_ERROR = (1 shl 29);  
MMC_RSP_R1_ERASE_SEQ_ERROR = (1 shl 28);  
MMC_RSP_R1_ERASE_PARAM = (1 shl 27);  
MMC_RSP_R1_WP_VIOLATION = (1 shl 26);  
MMC_RSP_R1_CARD_IS_LOCKED = (1 shl 25);  
MMC_RSP_R1_LOCK_UNLOCK_FAILED = (1 shl 24);  
MMC_RSP_R1_COM_CRC_ERROR = (1 shl 23);  
MMC_RSP_R1_ILLEGAL_COMMAND = (1 shl 22);  
MMC_RSP_R1_CARD_ECC_FAILED = (1 shl 21);  
MMC_RSP_R1_CC_ERROR = (1 shl 20);  
MMC_RSP_R1_ERROR = (1 shl 19);  
MMC_RSP_R1_UNDERRUN = (1 shl 18);  
MMC_RSP_R1_OVERRUN = (1 shl 17);  
MMC_RSP_R1_CID_CSD_OVERWRITE = (1 shl 16);  
MMC_RSP_R1_WP_ERASE_SKIP = (1 shl 15);  
MMC_RSP_R1_CARD_ECC_DISABLED = (1 shl 14);  
MMC_RSP_R1_ERASE_RESET = (1 shl 13);  
MMC_RSP_R1_READY_FOR_DATA = (1 shl 8);  
MMC_RSP_R1_SWITCH_ERROR = (1 shl 7);  
MMC_RSP_R1_EXCEPTION_EVENT = (1 shl 6);  
MMC_RSP_R1_APP_CMD = (1 shl 5);  
MMC_RSP_R1_AKE_SEQ_ERROR = (1 shl 3);  
 
R1 SPI - MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS. R1 is the low order byte, R2 is the next highest byte, when present.
MMC_RSP_R1_SPI_IDLE = (1 shl 0);  
MMC_RSP_R1_SPI_ERASE_RESET = (1 shl 1);  
MMC_RSP_R1_SPI_ILLEGAL_COMMAND = (1 shl 2);  
MMC_RSP_R1_SPI_COM_CRC = (1 shl 3);  
MMC_RSP_R1_SPI_ERASE_SEQ = (1 shl 4);  
MMC_RSP_R1_SPI_ADDRESS = (1 shl 5);  
MMC_RSP_R1_SPI_PARAMETER = (1 shl 6);  
R1 bit 7 is always zero
 
R2 SPI - See above
MMC_RSP_R2_SPI_CARD_LOCKED = (1 shl 8);  
MMC_RSP_R2_SPI_WP_ERASE_SKIP = (1 shl 9); Or lock/unlock fail
MMC_RSP_R2_SPI_LOCK_UNLOCK_FAIL = MMC_RSP_R2_SPI_WP_ERASE_SKIP;  
MMC_RSP_R2_SPI_ERROR = (1 shl 10);  
MMC_RSP_R2_SPI_CC_ERROR = (1 shl 11);  
MMC_RSP_R2_SPI_CARD_ECC_ERROR = (1 shl 12);  
MMC_RSP_R2_SPI_WP_VIOLATION = (1 shl 13);  
MMC_RSP_R2_SPI_ERASE_PARAM = (1 shl 14);  
MMC_RSP_R2_SPI_OUT_OF_RANGE = (1 shl 15); Or CSD overwrite
MMC_RSP_R2_SPI_CSD_OVERWRITE = MMC_RSP_R2_SPI_OUT_OF_RANGE;  


MMC operation condition register (OCR) value MMC_OCR_*
See: Section 5.1 of SD Physical Layer Simplified Specification V4.10
 
MMC_OCR_BUSY = $80000000; Busy Status - 0 = Initializing/1 = Initialization Complete
MMC_OCR_HCS = $40000000; Card Capacity Status - 0 = SDSC/1 = SDHC or SDXC
MMC_OCR_UHS_II = $20000000; UHS-II Card Status - 0 = Non UHS-II Card/1 = UHS-II Card
MMC_OCR_S18A = $01000000; Switching to 1.8V Accepted - 0 = Continue current voltage signaling/1 = Ready for switching signal voltage
MMC_OCR_VOLTAGE_MASK = $007FFF80;  
MMC_OCR_ACCESS_MODE = $60000000;  


MMC card status register (CSR) value MMC_CARD_STATUS_*
See: Section 4.10.1 of SD Physical Layer Simplified Specification Version 4.10
Note: These map to the Native mode R1 response values
 
MMC_CARD_STATUS_MASK = not($0206BF7F);  
MMC_CARD_STATUS_ERROR = (1 shl 19);  
MMC_CARD_STATUS_CURRENT_STATE = ($0F shl 9); See MMC_CURRENT_STATE_ definitions below
MMC_CARD_STATUS_READY_FOR_DATA = (1 shl 8);  
MMC_CARD_STATUS_SWITCH_ERROR = (1 shl 7);  


MMC current state value MMC_CURRENT_STATE_*
From Card Status Register or R1 Response
 
MMC_CURRENT_STATE_IDLE = (0 shl 9);  
MMC_CURRENT_STATE_READY = (1 shl 9);  
MMC_CURRENT_STATE_IDENT = (2 shl 9);  
MMC_CURRENT_STATE_STBY = (3 shl 9);  
MMC_CURRENT_STATE_TRAN = (4 shl 9);  
MMC_CURRENT_STATE_DATA = (5 shl 9);  
MMC_CURRENT_STATE_RCV = (6 shl 9);  
MMC_CURRENT_STATE_PRG = (7 shl 9);  
MMC_CURRENT_STATE_DIS = (8 shl 9);  


MMC card identification data (CID) value MMC_CID_*
See: Section 5.2 of SD Physical Layer Simplified Specification Version 4.10
 
MMC CID Fields
MMC_CID_MID = 1; Manufacturer Id
MMC_CID_OID = 2; OEM/Application Id
MMC_CID_PNM0 = 3; Product name (Byte 0)
MMC_CID_PNM1 = 4; Product name (Byte 1)
MMC_CID_PNM2 = 5; Product name (Byte 2)
MMC_CID_PNM3 = 6; Product name (Byte 3)
MMC_CID_PNM4 = 7; Product name (Byte 4)
MMC_CID_PNM5 = 8; Product name (Byte 5)
MMC_CID_PNM6 = 9; Product name (Byte 6)
MMC_CID_PRV = 10; Product revision
MMC_CID_HRV = 11; Hardware revision
MMC_CID_FRV = 12; Firmware revision
MMC_CID_PSN = 13; Product serial number
MMC_CID_MDT_YEAR = 14; Manufacturing year
MMC_CID_MDT_MONTH = 15; Manufacturing month
MMC_CID_CRC = 16; CRC


MMC card specific data (CSD) value MMC_CSD_*
See: Section 5.3 of SD Physical Layer Simplified Specification Version 4.10
 
MMC CSD Fields
MMC_CSD_STRUCTURE = 1;  
MMC_CSD_SPECVER = 2; MMC/eMMC Only
MMC_CSD_TAAC_UNIT = 3;  
MMC_CSD_TAAC_VALUE = 4;  
MMC_CSD_NSAC = 5;  
MMC_CSD_TRAN_SPEED_UNIT = 6;  
MMC_CSD_TRAN_SPEED_VALUE = 37;  
MMC_CSD_CCC = 7;  
MMC_CSD_READ_BL_LEN = 8;  
MMC_CSD_READ_BL_PARTIAL = 9;  
MMC_CSD_WRITE_BLK_MISALIGN = 10;  
MMC_CSD_READ_BLK_MISALIGN = 11;  
MMC_CSD_DSR_IMP = 12;  
MMC_CSD_C_SIZE = 13;  
MMC_CSD_VDD_R_CURR_MIN = 14;  
MMC_CSD_VDD_R_CURR_MAX = 15;  
MMC_CSD_VDD_W_CURR_MIN = 16;  
MMC_CSD_VDD_W_CURR_MAX = 17;  
MMC_CSD_C_SIZE_MULT = 18;  
MMC_CSD_ERASE_BLK_EN = 19; SD Specification
MMC_CSD_SECTOR_SIZE = 20; MMC/eMMC Specification/SD Specification
MMC_CSD_ERASE_GRP_SIZE = 21; MMC/eMMC Specification
MMC_CSD_ERASE_GRP_MULT = 22; MMC/eMMC Specification
MMC_CSD_WP_GRP_SIZE = 23;  
MMC_CSD_WP_GRP_ENABLE = 24;  
MMC_CSD_DEFAULT_ECC = 25; MMC/eMMC Only
MMC_CSD_R2W_FACTOR = 26;  
MMC_CSD_WRITE_BL_LEN = 27;  
MMC_CSD_WRITE_BL_PARTIAL = 28;  
MMC_CSD_CONTENT_PROT_APP = 29; MMC/eMMC Only
MMC_CSD_FILE_FORMAT_GRP = 30;  
MMC_CSD_COPY = 31;  
MMC_CSD_PERM_WRITE_PROTECT = 32;  
MMC_CSD_TMP_WRITE_PROTECT = 33;  
MMC_CSD_FILE_FORMAT = 34;  
MMC_CSD_ECC = 35; MMC/eMMC Only
MMC_CSD_CRC = 36;  


MMC CSD structure value MMC_CSD_STRUCT_*
MMC_CSD_STRUCT_VER_1_0 = 0; Valid for system specification 1.0 - 1.2
MMC_CSD_STRUCT_VER_1_1 = 1; Valid for system specification 1.4 - 2.2
MMC_CSD_STRUCT_VER_1_2 = 2; Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1
MMC_CSD_STRUCT_EXT_CSD = 3; Version is coded in CSD_STRUCTURE in EXT_CSD


MMC CSD spec version value MMC_CSD_SPEC_VER_*
MMC_CSD_SPEC_VER_0 = 0; Implements system specification 1.0 - 1.2
MMC_CSD_SPEC_VER_1 = 1; Implements system specification 1.4
MMC_CSD_SPEC_VER_2 = 2; Implements system specification 2.0 - 2.2
MMC_CSD_SPEC_VER_3 = 3; Implements system specification 3.1 - 3.2 - 3.31
MMC_CSD_SPEC_VER_4 = 4; Implements system specification 4.0 - 4.1


MMC CSD TAAC time unit MMC_CSD_TAAC_UNITS*
MMC_CSD_TAAC_UNITS:array[0..7] of LongWord = (
1,  
10,  
100,  
1000,  
10000,  
100000,  
1000000,  
10000000);  


MMC CSD TAAC time value MMC_CSD_TAAC_VALUES*
MMC_CSD_TAAC_VALUES:array[0..15] of LongWord = (
0,  
10,  
12,  
13,  
15,  
20,  
25,  
30,  
35,  
40,  
45,  
50,  
55,  
60,  
70,  
80);  


MMC CSD card command class (CCC) value MMC_CCC_*
See: Table 4-21 (Page 68) of SD Physical Layer Simplified Specification V4.10
 
MMC_CCC_BASIC = (1 shl 0); (Class 0) Basic protocol functions (CMD0,1,2,3,4,7,9,10,12,13,15) (and for SPI, CMD58,59)
MMC_CCC_STREAM_READ = (1 shl 1); (Class 1) Stream read commands (CMD11)
MMC_CCC_BLOCK_READ = (1 shl 2); (Class 2) Block read commands (CMD16,17,18)
MMC_CCC_STREAM_WRITE = (1 shl 3); (Class 3) Stream write commands (CMD20)
MMC_CCC_BLOCK_WRITE = (1 shl 4); (Class 4) Block write commands (CMD16,24,25,26,27)
MMC_CCC_ERASE = (1 shl 5); (Class 5) Ability to erase blocks (CMD32,33,34,35,36,37,38,39)
MMC_CCC_WRITE_PROT = (1 shl 6); (Class 6) Ability to write protect blocks (CMD28,29,30)
MMC_CCC_LOCK_CARD = (1 shl 7); (Class 7) Ability to lock down card (CMD16,CMD42)
MMC_CCC_APP_SPEC = (1 shl 8); (Class 8) Application specific (CMD55,56,57,ACMD*)
MMC_CCC_IO_MODE = (1 shl 9); (Class 9) I/O mode (CMD5,39,40,52,53)
MMC_CCC_SWITCH = (1 shl 10); (Class 10) High speed switch (CMD6,34,35,36,37,50)
MMC_CCC_EXTENSION = (1 shl 11); (Class 11) Extension (CMD?)


MMC CSD transfer speed rate unit MMC_CSD_TRAN_SPEED_UNITS*
MMC_CSD_TRAN_SPEED_UNITS:array[0..7] of LongWord = (
10000,  
100000,  
1000000,  
10000000,  
0,  
0,  
0,  
0);  


MMC CSD transfer speed time value MMC_CSD_TRAN_SPEED_VALUES*
MMC_CSD_TRAN_SPEED_VALUES:array[0..15] of LongWord = (
0,  
10,  
12,  
13,  
15,  
20,  
25,  
30,  
35,  
40,  
45,  
50,  
55,  
60,  
70,  
80);  
 
SECURE_ERASE = $80000000; Used by MMC_CMD_ERASE


MMC voltage value MMC_VDD_*
MMC_VDD_165_195 = $00000080; VDD voltage 1.65 - 1.95
MMC_VDD_20_21 = $00000100; VDD voltage 2.0 ~ 2.1
MMC_VDD_21_22 = $00000200; VDD voltage 2.1 ~ 2.2
MMC_VDD_22_23 = $00000400; VDD voltage 2.2 ~ 2.3
MMC_VDD_23_24 = $00000800; VDD voltage 2.3 ~ 2.4
MMC_VDD_24_25 = $00001000; VDD voltage 2.4 ~ 2.5
MMC_VDD_25_26 = $00002000; VDD voltage 2.5 ~ 2.6
MMC_VDD_26_27 = $00004000; VDD voltage 2.6 ~ 2.7
MMC_VDD_27_28 = $00008000; VDD voltage 2.7 ~ 2.8
MMC_VDD_28_29 = $00010000; VDD voltage 2.8 ~ 2.9
MMC_VDD_29_30 = $00020000; VDD voltage 2.9 ~ 3.0
MMC_VDD_30_31 = $00040000; VDD voltage 3.0 ~ 3.1
MMC_VDD_31_32 = $00080000; VDD voltage 3.1 ~ 3.2
MMC_VDD_32_33 = $00100000; VDD voltage 3.2 ~ 3.3
MMC_VDD_33_34 = $00200000; VDD voltage 3.3 ~ 3.4
MMC_VDD_34_35 = $00400000; VDD voltage 3.4 ~ 3.5
MMC_VDD_35_36 = $00800000; VDD voltage 3.5 ~ 3.6


MMC switch mode value MMC_SWITCH_MODE_*
MMC_SWITCH_MODE_CMD_SET = $00; Change the command set
MMC_SWITCH_MODE_SET_BITS = $01; Set bits in EXT_CSD byte addressed by index which are 1 in value field
MMC_SWITCH_MODE_CLEAR_BITS = $02; Clear bits in EXT_CSD byte addressed by index, which are 1 in value field
MMC_SWITCH_MODE_WRITE_BYTE = $03; Set target byte to value


MMC EXT_CSD field EXT_CSD_*
EXT_CSD_CMDQ_MODE_EN = 15; R/W
EXT_CSD_FLUSH_CACHE = 32; W
EXT_CSD_CACHE_CTRL = 33; R/W
EXT_CSD_POWER_OFF_NOTIFICATION = 34; R/W
EXT_CSD_PACKED_FAILURE_INDEX = 35; RO
EXT_CSD_PACKED_CMD_STATUS = 36; RO
EXT_CSD_EXP_EVENTS_STATUS = 54;/code> RO, 2 bytes
<code>EXT_CSD_EXP_EVENTS_CTRL = 56; R/W, 2 bytes
EXT_CSD_DATA_SECTOR_SIZE = 61; R
EXT_CSD_ENH_START_ADDR = 136; R/W
EXT_CSD_ENH_SIZE_MULT = 140; R/W
EXT_CSD_GP_SIZE_MULT = 143; R/W
EXT_CSD_PARTITION_SETTING_COMPLETED = 155; R/W
EXT_CSD_PARTITION_ATTRIBUTE = 156; R/W
EXT_CSD_MAX_ENH_SIZE_MULT = 157; R
EXT_CSD_PARTITION_SUPPORT = 160; RO
EXT_CSD_HPI_MGMT = 161; R/W
EXT_CSD_RST_N_FUNCTION = 162; R/W
EXT_CSD_BKOPS_EN = 163; R/W
EXT_CSD_BKOPS_START = 164; W
EXT_CSD_SANITIZE_START = 165; W
EXT_CSD_WR_REL_PARAM = 166; RO
EXT_CSD_WR_REL_SET = 167; R/W
EXT_CSD_RPMB_MULT = 168; RO
EXT_CSD_FW_CONFIG = 169; R/W
EXT_CSD_BOOT_WP = 173; R/W
EXT_CSD_ERASE_GROUP_DEF = 175; R/W
EXT_CSD_BOOT_BUS_CONDITIONS = 177; R/W/E
EXT_CSD_PART_CONFIG = 179; R/W
EXT_CSD_ERASED_MEM_CONT = 181; RO
EXT_CSD_BUS_WIDTH = 183; R/W
EXT_CSD_STROBE_SUPPORT = 184 RO
EXT_CSD_HS_TIMING = 185; R/W
EXT_CSD_POWER_CLASS = 187; R/W
EXT_CSD_REV = 192; RO
EXT_CSD_STRUCTURE = 194; RO
EXT_CSD_CARD_TYPE = 196; RO
EXT_CSD_DRIVER_STRENGTH = 197; RO
EXT_CSD_OUT_OF_INTERRUPT_TIME = 198; RO
EXT_CSD_PART_SWITCH_TIME = 199; RO
EXT_CSD_PWR_CL_52_195 = 200; RO
EXT_CSD_PWR_CL_26_195 = 201; RO
EXT_CSD_PWR_CL_52_360 = 202; RO
EXT_CSD_PWR_CL_26_360 = 203; RO
EXT_CSD_SEC_CNT = 212; RO, 4 bytes
EXT_CSD_S_A_TIMEOUT = 217; RO
EXT_CSD_REL_WR_SEC_C = 222; RO
EXT_CSD_HC_WP_GRP_SIZE = 221; RO
EXT_CSD_ERASE_TIMEOUT_MULT = 223; RO
EXT_CSD_HC_ERASE_GRP_SIZE = 224; RO
EXT_CSD_BOOT_SIZE_MULT = 226; RO
EXT_CSD_SEC_TRIM_MULT = 229; RO
EXT_CSD_SEC_ERASE_MULT = 230; RO
EXT_CSD_SEC_FEATURE_SUPPORT = 231; RO
EXT_CSD_TRIM_MULT = 232; RO
EXT_CSD_PWR_CL_200_195 = 236; RO
EXT_CSD_PWR_CL_200_360 = 237; RO
EXT_CSD_PWR_CL_DDR_52_195 = 238; RO
EXT_CSD_PWR_CL_DDR_52_360 = 239; RO
EXT_CSD_BKOPS_STATUS = 246; RO
EXT_CSD_POWER_OFF_LONG_TIME = 247; RO
EXT_CSD_GENERIC_CMD6_TIME = 248; RO
EXT_CSD_CACHE_SIZE = 249; RO, 4 bytes
EXT_CSD_PWR_CL_DDR_200_360 = 253; RO
EXT_CSD_FIRMWARE_VERSION = 254; RO, 8 bytes
EXT_CSD_PRE_EOL_INFO = 267; RO
EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A = 268; RO
EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B = 269; RO
EXT_CSD_CMDQ_DEPTH = 307; RO
EXT_CSD_CMDQ_SUPPORT = 308; RO
EXT_CSD_SUPPORTED_MODE = 493; RO
EXT_CSD_TAG_UNIT_SIZE = 498; RO
EXT_CSD_DATA_TAG_SUPPORT = 499; RO
EXT_CSD_MAX_PACKED_WRITES = 500; RO
EXT_CSD_MAX_PACKED_READS = 501; RO
EXT_CSD_BKOPS_SUPPORT = 502; RO
EXT_CSD_HPI_FEATURES = 503; RO


MMC EXT_CSD field definition EXT_CSD_*
EXT_CSD_PARTITION_ATTRIBUTE_ENH_4 = $10;  
EXT_CSD_PARTITION_ATTRIBUTE_ENH_3 = $08;  
EXT_CSD_PARTITION_ATTRIBUTE_ENH_2 = $04;  
EXT_CSD_PARTITION_ATTRIBUTE_ENH_1 = $02;  
EXT_CSD_PARTITION_ATTRIBUTE_ENH_USR = $01;  
 
EXT_CSD_PARTITION_EXT_ATTRIBUTE_EN = $04;  
EXT_CSD_PARTITION_ENH_ATTRIBUTE_EN = $02;  
EXT_CSD_PARTITION_PARTITIONING_EN = $01;  
 
EXT_CSD_WR_REL_PARAM_EN = (1 shl 2);  
EXT_CSD_WR_REL_PARAM_EN_RPMB_REL_WR = (1 shl 4);  
 
EXT_CSD_BOOT_WP_B_PWR_WP_DIS = $40;  
EXT_CSD_BOOT_WP_B_PERM_WP_DIS = $10;  
EXT_CSD_BOOT_WP_B_PERM_WP_EN = $04;  
EXT_CSD_BOOT_WP_B_PWR_WP_EN = $01;  
 
EXT_CSD_PART_CONFIG_ACC_MASK = $07;  
EXT_CSD_PART_CONFIG_ACC_BOOT0 = $01;  
EXT_CSD_PART_CONFIG_ACC_RPMB = $03;  
EXT_CSD_PART_CONFIG_ACC_GP0 = $04;  
 
EXT_CSD_PART_SETTING_COMPLETED = $01;  
EXT_CSD_PART_SUPPORT_PART_EN = $01;  
 
EXT_CSD_CMD_SET_NORMAL = (1 shl 0);  
EXT_CSD_CMD_SET_SECURE = (1 shl 1);  
EXT_CSD_CMD_SET_CPSECURE = (1 shl 2);  
 
EXT_CSD_CARD_TYPE_HS_26 = (1 shl 0); Card can run at 26MHz
EXT_CSD_CARD_TYPE_HS_52 = (1 shl 1); Card can run at 52MHz
EXT_CSD_CARD_TYPE_HS = (EXT_CSD_CARD_TYPE_HS_26 or EXT_CSD_CARD_TYPE_HS_52);  
EXT_CSD_CARD_TYPE_DDR_1_8V = (1 shl 2); Card can run at 52MHz / DDR mode @1.8V or 3V I/O
EXT_CSD_CARD_TYPE_DDR_1_2V = (1 shl 3); Card can run at 52MHz / DDR mode @1.2V I/O
EXT_CSD_CARD_TYPE_DDR_52 = (EXT_CSD_CARD_TYPE_DDR_1_8V or EXT_CSD_CARD_TYPE_DDR_1_2V);  
EXT_CSD_CARD_TYPE_HS200_1_8V = (1 shl 4); Card can run at 200MHz
EXT_CSD_CARD_TYPE_HS200_1_2V = (1 shl 5); Card can run at 200MHz / SDR mode @1.2V I/O
EXT_CSD_CARD_TYPE_HS200 = (EXT_CSD_CARD_TYPE_HS200_1_8V or EXT_CSD_CARD_TYPE_HS200_1_2V);  
EXT_CSD_CARD_TYPE_HS400_1_8V = (1 shl 6); Card can run at 200MHz DDR, 1.8V
EXT_CSD_CARD_TYPE_HS400_1_2V = (1 shl 7); Card can run at 200MHz DDR, 1.2V
EXT_CSD_CARD_TYPE_HS400 = (EXT_CSD_CARD_TYPE_HS400_1_8V or EXT_CSD_CARD_TYPE_HS400_1_2V);  
EXT_CSD_CARD_TYPE_HS400ES = (1 shl 8); Card can run at HS400ES
 
EXT_CSD_BUS_WIDTH_1 = 0; Card is in 1 bit mode
EXT_CSD_BUS_WIDTH_4 = 1; Card is in 4 bit mode
EXT_CSD_BUS_WIDTH_8 = 2; Card is in 8 bit mode
EXT_CSD_DDR_BUS_WIDTH_4 = 5; Card is in 4 bit DDR mode
EXT_CSD_DDR_BUS_WIDTH_8 = 6; Card is in 8 bit DDR mode
EXT_CSD_BUS_WIDTH_STROBE = 1 shl 7; Enhanced strobe mode
 
EXT_CSD_TIMING_BC = 0; Backwards compatility
EXT_CSD_TIMING_HS = 1; High speed
EXT_CSD_TIMING_HS200 = 2; HS200
EXT_CSD_TIMING_HS400 = 3; HS400
EXT_CSD_DRV_STR_SHIFT = 4; Driver Strength shift
 
EXT_CSD_SEC_ER_EN = 1 shl 0;  
EXT_CSD_SEC_BD_BLK_EN = 1 shl 2;  
EXT_CSD_SEC_GB_CL_EN = 1 shl 4;  
EXT_CSD_SEC_SANITIZE = 1 shl 6; v4.5 only
 
EXT_CSD_RST_N_EN_MASK = $03;  
EXT_CSD_RST_N_ENABLED = 1; RST_n is enabled on card
 
EXT_CSD_NO_POWER_NOTIFICATION = 0;  
EXT_CSD_POWER_ON = 1;  
EXT_CSD_POWER_OFF_SHORT = 2;  
EXT_CSD_POWER_OFF_LONG = 3;  
 
EXT_CSD_PWR_CL_8BIT_MASK = $F0; 8 bit PWR CLS
EXT_CSD_PWR_CL_4BIT_MASK = $0F; 8 bit PWR CLS
EXT_CSD_PWR_CL_8BIT_SHIFT = 4;  
EXT_CSD_PWR_CL_4BIT_SHIFT = 0;  
 
EXT_CSD_PACKED_EVENT_EN = 1 shl 3;  


MMC EXT_CSD exception event status field EXT_CSD_*
EXT_CSD_URGENT_BKOPS = 1 shl 0;  
EXT_CSD_DYNCAP_NEEDED = 1 shl 1;  
EXT_CSD_SYSPOOL_EXHAUSTED = 1 shl 2;  
EXT_CSD_PACKED_FAILURE = 1 shl 3;  
 
EXT_CSD_PACKED_GENERIC_ERROR = 1 shl 0;  
EXT_CSD_PACKED_INDEXED_ERROR = 1 shl 1;  


MMC EXT_CSD BKOPS status level EXT_CSD_BKOPS_*
EXT_CSD_BKOPS_LEVEL_2 = $02;  


MMC EXT_CSD BKOPS mode EXT_CSD_*_BKOPS_
EXT_CSD_MANUAL_BKOPS_MASK = $01;  
EXT_CSD_AUTO_BKOPS_MASK = $02;  


MMC EXT_CSD command queue EXT_CSD_CMDQ_*
EXT_CSD_CMDQ_MODE_ENABLED = 1 shl 0;  
EXT_CSD_CMDQ_DEPTH_MASK = $1F;  
EXT_CSD_CMDQ_SUPPORTED = 1 shl 0;  


MMC EXT_CSD high speed max MMC_HIGH_*
MMC_HIGH_26_MAX_DTR = 26000000;  
MMC_HIGH_52_MAX_DTR = 52000000;  
MMC_HIGH_DDR_MAX_DTR = 52000000;  
MMC_HS200_MAX_DTR = 200000000;  


MMC EXT_CSD minimum partition switch timeout MMC_MIN_PART_*
MMC_MIN_PART_SWITCH_TIME = 300; Milliseconds


MMC miscellaneous MMCPART_*, MMC_MAX_*
MMCPART_NOAVAILABLE = ($ff);  
PART_ACCESS_MASK = ($07);  
PART_SUPPORT = ($01);  
ENHNCD_SUPPORT = ($02);  
PART_ENH_ATTRIB = ($1f);  
 
Maximum block size for MMC
MMC_MAX_BLOCK_LEN = 512;  
 
Maximum block count for MMC
MMC_MAX_BLOCK_COUNT = 65535;  
 
The number of MMC physical partitions. These consist of: boot partitions (2), general purpose partitions (4) and RPMB partition (1) in MMC v4.4
MMC_NUM_BOOT_PARTITION = 2;  
MMC_NUM_GP_PARTITION = 4;  
MMC_NUM_PHY_PARTITION = 7;  
 
Timeouts
MMC_DEFAULT_CMD6_TIMEOUT_MS = 500;  
MMC_MIN_CACHE_EN_TIMEOUT_MS = 1600;  
 
Sizes
MMC_FIRMWARE_VERSION_LEN = 8;  
 
Version specific features
MMC_DISCARD_FEATURE = $01;  
 
Busy Poll Commands
MMC_BUSY_CMD6 = 0;  
MMC_BUSY_ERASE = 1;  
MMC_BUSY_HPI = 2;  
 
Erase/Trim/Discard Arguments
MMC_ERASE_ARG = $00000000;  
MMC_SECURE_ERASE_ARG = $80000000;  
MMC_TRIM_ARG = $00000001;  
MMC_DISCARD_ARG = $00000003;  
MMC_SECURE_TRIM1_ARG = $80000001;  
MMC_SECURE_TRIM2_ARG = $80008000;  
MMC_SECURE_ARGS = $80000000;  
MMC_TRIM_ARGS = $00008001;  


MMC logging MMC_LOG_*
MMC_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG; MMC debugging messages
MMC_LOG_LEVEL_INFO = LOG_LEVEL_INFO; MMC informational messages, such as a device being attached or detached
MMC_LOG_LEVEL_WARN = LOG_LEVEL_WARN; MMC warning messages
MMC_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR; MMC error messages
MMC_LOG_LEVEL_NONE = LOG_LEVEL_NONE; No MMC messages


SD specific constants SD_*
SD_DEFAULT_BLOCKSIZE = 512;  
SD_DEFAULT_BLOCKSHIFT = 9;  


SD bus width SD_BUS_WIDTH_*
SD_BUS_WIDTH_1 = 0;  
SD_BUS_WIDTH_4 = 2;  


SD bus speed (Hz) SD_BUS_SPEED_*
SD_BUS_SPEED_DEFAULT = 25000000;  
SD_BUS_SPEED_HS = 50000000;  
SD_BUS_SPEED_UHS_SDR12 = 25000000;  
SD_BUS_SPEED_UHS_SDR25 = 50000000;  
SD_BUS_SPEED_UHS_DDR50 = 50000000;  
SD_BUS_SPEED_UHS_SDR50 = 100000000;  
SD_BUS_SPEED_UHS_SDR104 = 208000000;  


SD command SD_CMD_*
From: /include/linux/mmc/sd.h
 
Class 0
SD_CMD_SEND_RELATIVE_ADDR = 3;  
SD_CMD_SEND_IF_COND = 8;  
SD_CMD_SWITCH_VOLTAGE = 11;  
 
Class 10
SD_CMD_SWITCH = 6; See: 4.3.10 Switch Function Command
 
Class 5
SD_CMD_ERASE_WR_BLK_START = 32;  
SD_CMD_ERASE_WR_BLK_END = 33;  
 
Application commands
SD_CMD_APP_SET_BUS_WIDTH = 6;  
SD_CMD_APP_SD_STATUS = 13;  
SD_CMD_APP_SEND_NUM_WR_BLKS = 22;  
SD_CMD_APP_SEND_OP_COND = 41;  
SD_CMD_APP_SEND_SCR = 51;  
 
SD_CMD_SWITCH argument format:
[31] Check (0) or switch (1)  
[30:24] Reserved (0)  
[23:20] Function group 6  
[19:16] Function group 5  
[15:12] Function group 4  
[11:8] Function group 3  
[7:4] Function group 2  
[3:0] Function group 1  


SD switch mode value SD_SWITCH_MODE_*
SD_SWITCH_MODE_CHECK = 0;  
SD_SWITCH_MODE_SWITCH = 1;  


SD switch function group SD_SWITCH_FUNCTION_GROUP_*
SD_SWITCH_FUNCTION_GROUP_ACCESS = 0; Access Mode
SD_SWITCH_FUNCTION_GROUP_COMMAND = 1; Command System
SD_SWITCH_FUNCTION_GROUP_DRIVER = 2; Driver Strength
SD_SWITCH_FUNCTION_GROUP_POWER = 3; Power Limit


SD switch access mode SD_SWITCH_ACCESS_MODE_*
SD_SWITCH_ACCESS_MODE_DEF = 0; Default SDR12
SD_SWITCH_ACCESS_MODE_HS = 1; High Speed SDR25
SD_SWITCH_ACCESS_MODE_SDR50 = 2; SDR50 (1.8V only)
SD_SWITCH_ACCESS_MODE_SDR104 = 3; SDR104 (1.8V only)
SD_SWITCH_ACCESS_MODE_DDR50 = 4; DDR50 (1.8V only)


SD switch command system SD_SWITCH_COMMAND_SYSTEM_*
SD_SWITCH_COMMAND_SYSTEM_DEF = 0; Default
SD_SWITCH_COMMAND_SYSTEM_EC = 1; For eC
SD_SWITCH_COMMAND_SYSTEM_OTP = 3; OTP
SD_SWITCH_COMMAND_SYSTEM_ASSD = 4; ASSD


SD switch driver strength SD_SWITCH_DRIVER_STRENGTH_*
SD_SWITCH_DRIVER_STRENGTH_DEF = 0; Default Type B
SD_SWITCH_DRIVER_STRENGTH_TYPE_A = 1; Type A
SD_SWITCH_DRIVER_STRENGTH_TYPE_C = 2; Type C
SD_SWITCH_DRIVER_STRENGTH_TYPE_D = 3; Type D


SD switch power limit SD_SWITCH_POWER_LIMIT_*
SD_SWITCH_POWER_LIMIT_DEF = 0; Default 0.72W
SD_SWITCH_POWER_LIMIT_144 = 1; 1.44W
SD_SWITCH_POWER_LIMIT_216 = 2; 2.16W (Embedded only)
SD_SWITCH_POWER_LIMIT_216 = 2; 2.16W (Embedded only)
SD_SWITCH_POWER_LIMIT_288 = 3; 2.88W (Embedded only)
SD_SWITCH_POWER_LIMIT_180 = 4; 1.80W


SD send interface condition value SD_SEND_IF_COND_*
SD_SEND_IF_COND_CHECK_PATTERN = $AA;  
SD_SEND_IF_COND_VOLTAGE_MASK = $00FF8000; MMC_VDD_27_28, MMC_VDD_28_29, MMC_VDD_29_30, MMC_VDD_30_31, MMC_VDD_31_32, MMC_VDD_32_33, MMC_VDD_33_34, MMC_VDD_34_35, MMC_VDD_35_36
 
SD_CMD_SEND_IF_COND argument format:
[31:12] Reserved (0)  
[11:8] Host Voltage Supply Flags  
[7:0] Check Pattern (0xAA)  


SD send operation condition value SD_SEND_OP_COND_*
SD_SEND_OP_COND_VOLTAGE_MASK = $00FF8000; MMC_VDD_27_28, MMC_VDD_28_29, MMC_VDD_29_30, MMC_VDD_30_31, MMC_VDD_31_32, MMC_VDD_32_33, MMC_VDD_33_34, MMC_VDD_34_35, MMC_VDD_35_36


SD operation condition register value SD_OCR_*
See: Section 5.1 of SD Physical Layer Simplified Specification V4.10
 
SD_OCR_CCS = $40000000; Card Capacity Status - 0 = SDSC/1 = SDHC or SDXC
SD_OCR_CCS = $40000000; Card Capacity Status - 0 = SDSC/1 = SDHC or SDXC
SD_OCR_UHS_II = $20000000; UHS-II Card Status - 0 = Non UHS-II Card/1 = UHS-II Card
SD_OCR_XPC = $10000000; SDXC Power Control
SD_OCR_S18A = $01000000; 1.8V Switching Accepted


SD CSD structure value SD_CSD_STRUCT_*
SD_CSD_STRUCT_VER_1_0 = 0; Standard Capacity
SD_CSD_STRUCT_VER_2_0 = 1; High Capacity and Extended Capacity


SD status register (SSR) value SD_SSR_*
See: Section 4.10.2 of SD Physical Layer Simplified Specification Version 4.10
 
SD SSR Fields
SD_SSR_DAT_BUS_WIDTH = 1;  
SD_SSR_SECURED_MODE = 2;  
SD_SSR_SD_CARD_TYPE = 3;  
SD_SSR_SIZE_OF_PROTECTED_AREA = 4;  
SD_SSR_SPEED_CLASS = 5;  
SD_SSR_PERFORMANCE_MOVE = 6;  
SD_SSR_AU_SIZE = 7;  
SD_SSR_ERASE_SIZE = 8;  
SD_SSR_ERASE_TIMEOUT = 9;  
SD_SSR_ERASE_OFFSET = 10;  
SD_SSR_UHS_SPEED_GRADE = 11;  
SD_SSR_UHS_AU_SIZE = 12;  


SD SSR bus width value SD_SSR_BUS_WIDTH_*
SD_SSR_BUS_WIDTH_1 = 0; 1 (default)
SD_SSR_BUS_WIDTH_4 = 2; 4 bit width


SD SSR card type value SD_SSR_CARD_TYPE_*
SD_SSR_CARD_TYPE_RW = $0000; Regular SD RD/WR Card
SD_SSR_CARD_TYPE_ROM = $0001; SD ROM Card
SD_SSR_CARD_TYPE_OTP = $0002; OTP


SD SSR speed class value SD_SSR_SPEED_CLASS_*
SD_SSR_SPEED_CLASS_0 = $00; Class 0
SD_SSR_SPEED_CLASS_2 = $01; Class 2
SD_SSR_SPEED_CLASS_4 = $02; Class 4
SD_SSR_SPEED_CLASS_6 = $03; Class 6
SD_SSR_SPEED_CLASS_10 = $04; Class 10


SD SSR AU size value SD_SSR_AU_SIZE_*
SD_SSR_AU_SIZE_VALUES:array[0..15] of LongWord = (
0, Not Defined
$00004000, 16 KB
$00008000, 32 KB
$00010000, 64 KB
$00020000, 128 KB
$00040000, 256 KB
$00080000, 512 KB
$00100000, 1 MB
$00200000, 2 MB
$00400000, 4 MB
$00800000, 8 MB
$00800000 + $00400000, 12 MB
$01000000, 16 MB
$01000000 + $00800000, 24 MB
$02000000, 32 MB
$04000000); 64 MB


SD SSR UHS speed grade value SD_SSR_UHS_SPEED_*
SD_SSR_UHS_SPEED_GRADE_0 = 0; Less than 10MB/sec
SD_SSR_UHS_SPEED_GRADE_1 = 1; 10MB/sec and above


SD SSR UHS AU size value SD_SSR_UHS_AU_SIZE_*
SD_SSR_UHS_AU_SIZE_VALUES:array[0..15] of LongWord = (
0, Not Defined
0, Not Used
0, Not Used
0, Not Used
0, Not Used
0, Not Used
0, Not Used
$00100000, 1 MB
$00200000, 2 MB
$00400000, 4 MB
$00800000, 8 MB
$00800000 + $00400000, 12 MB
$01000000, 16 MB
$01000000 + $00800000, 24 MB
$02000000, 32 MB
$04000000); 64 MB


SD switch status value SD_SWITCH_*
See: Section 4.3.10 of SD Physical Layer Simplified Specification Version 4.10
 
SD Switch Fields
SD_SWITCH_MAXIMUM_CURRENT = 1;  
SD_SWITCH_GROUP6_SUPPORT = 2;  
SD_SWITCH_GROUP5_SUPPORT = 3;  
SD_SWITCH_GROUP4_SUPPORT = 4;  
SD_SWITCH_GROUP3_SUPPORT = 5;  
SD_SWITCH_GROUP2_SUPPORT = 6;  
SD_SWITCH_GROUP1_SUPPORT = 7;  
SD_SWITCH_GROUP6_SELECTION = 8;  
SD_SWITCH_GROUP5_SELECTION = 9;  
SD_SWITCH_GROUP4_SELECTION = 10;  
SD_SWITCH_GROUP3_SELECTION = 11;  
SD_SWITCH_GROUP2_SELECTION = 12;  
SD_SWITCH_GROUP1_SELECTION = 13;  
SD_SWITCH_STRUCT_VERSION = 14;  
SD_SWITCH_GROUP6_BUSY_STATUS = 15;  
SD_SWITCH_GROUP5_BUSY_STATUS = 16;  
SD_SWITCH_GROUP4_BUSY_STATUS = 17;  
SD_SWITCH_GROUP3_BUSY_STATUS = 18;  
SD_SWITCH_GROUP2_BUSY_STATUS = 19;  
SD_SWITCH_GROUP1_BUSY_STATUS = 20;  
 
SD Switch Access Mode (Bus Speed) Support (Group 1)
SD_SWITCH_GROUP1_SDR12 = (1 shl 0);  
SD_SWITCH_GROUP1_HS = (1 shl 1);  
SD_SWITCH_GROUP1_SDR25 = (1 shl 1);  
SD_SWITCH_GROUP1_SDR50 = (1 shl 2);  
SD_SWITCH_GROUP1_SDR104 = (1 shl 3);  
SD_SWITCH_GROUP1_DDR50 = (1 shl 4);  
 
SD Switch Driver Strength Support (Group 3)
SD_SWITCH_GROUP3_TYPE_B = (1 shl 0);  
SD_SWITCH_GROUP3_TYPE_A = (1 shl 1);  
SD_SWITCH_GROUP3_TYPE_C = (1 shl 2);  
SD_SWITCH_GROUP3_TYPE_D = (1 shl 3);  
 
SD Switch Structure Versions
SD_SWITCH_STRUCT_VER_0 = 0; Bits 511:376 are defined (SD_SWITCH_MAXIMUM_CURRENT to SD_SWITCH_GROUP1_SELECTION)
SD_SWITCH_STRUCT_VER_1 = 1; Bits 511:272 are defined (SD_SWITCH_MAXIMUM_CURRENT to SD_SWITCH_GROUP1_BUSY_STATUS


SD configuration register (SCR) value SD_SCR_*
See: Section 5.6 of SD Physical Layer Simplified Specification Version 4.10
 
SD SCR Fields
SD_SCR_STRUCTURE = 1;  
SD_SCR_SD_SPEC = 2;  
SD_SCR_DATA_STAT_AFTER_ERASE = 3;  
SD_SCR_SD_SECURITY = 4;  
SD_SCR_SD_BUS_WIDTHS = 5;  
SD_SCR_SD_SPEC3 = 6;  
SD_SCR_EX_SECURITY = 7;  
SD_SCR_SD_SPEC4 = 8;  
SD_SCR_CMD_SUPPORT = 9;  


SD SCR structure value SD_SCR_STRUCT_*
SD_SCR_STRUCT_VER_1_0 = 0; Valid for system specification 1.01 - 4.0


SD SCR spec version value SD_SCR_SPEC_VER_*
SD_SCR_SPEC_VER_0 = 0; Implements system specification 1.0 - 1.01
SD_SCR_SPEC_VER_1 = 1; Implements system specification 1.10
SD_SCR_SPEC_VER_2 = 2; Implements system specification 2.00-4.0X


SD SCR security value SD_SCR_SECURITY_*
SD_SCR_SECURITY_VER_0 = 0; No Security
SD_SCR_SECURITY_VER_2 = 2; SDSC Card (Security Version 1.01)
SD_SCR_SECURITY_VER_3 = 3; SDHC Card (Security Version 2.00)
SD_SCR_SECURITY_VER_4 = 4; SDXC Card (Security Version 3.xx)


SD SCR bus width value SD_SCR_BUS_WIDTH_*
SD_SCR_BUS_WIDTH_1 = (1 shl 0); 1 bit (DAT0)
SD_SCR_BUS_WIDTH_4 = (1 shl 2); {4 bit (DAT0-3)} 4 bit (DAT0-3)


SD SCR extended security value SD_SCR_EX_SECURITY_*
SD_SCR_EX_SECURITY_VER_0 = 0; Extended Security is not supported


SD SCR command support value SD_SCR_*_SUPPORT
SD_SCR_CMD20_SUPPORT = (1 shl 0); Mandatory for SDXC card
SD_SCR_CMD23_SUPPORT = (1 shl 1); Mandatory for UHS104 card
SD_SCR_CMD48_49_SUPPORT = (1 shl 2); Optional
SD_SCR_CMD58_59_SUPPORT = (1 shl 3); Optional (If CMD58/59 is supported, CMD48/49 shall be supported)


SDIO function state SDIO_STATE_*
SDIO_STATE_DETACHED = 0;  
SDIO_STATE_DETACHING = 1;  
SDIO_STATE_ATTACHING = 2;  
SDIO_STATE_ATTACHED = 3;  
 
SDIO_STATE_MAX = 3;  


SDIO function state name SDIO_STATE_*
SDIO_STATE_NAMES:array[SDIO_STATE_DETACHED..SDIO_STATE_MAX] of String = (  
'SDIO_STATE_DETACHED',  
'SDIO_STATE_DETACHING',  
'SDIO_STATE_ATTACHING',  
'SDIO_STATE_ATTACHED');  


SDIO function status SDIO_STATUS_*
SDIO_STATUS_UNBOUND = 0;  
SDIO_STATUS_BOUND = 1;  
 
SDIO_STATUS_MAX = 1;  


SDIO function status name SDIO_STATUS_*
SDIO_STATUS_NAMES:array[SDIO_STATUS_UNBOUND..SDIO_STATUS_MAX] of String = (  
'SDIO_STATUS_UNBOUND',  
'SDIO_STATUS_BOUND');  


SDIO command SDIO_CMD_*
From: /include/linux/mmc/sdio.h
 
SDIO_CMD_SEND_OP_COND = 5;  
SDIO_CMD_RW_DIRECT = 52;  
SDIO_CMD_RW_EXTENDED = 53;  
 
SDIO_CMD_RW_DIRECT argument format:
[31] R/W flag  
[30:28] Function number  
[27] RAW flag  
[25:9] Register address  
[7:0] Data  
 
SDIO_CMD_RW_EXTENDED argument format:
[31] R/W flag  
[30:28] Function number  
[27] Block mode  
[26] Increment address  
[25:9] Register address  
[8:0] Byte/block count  


SDIO response value SDIO_RSP_*
From: /include/linux/mmc/sdio.h
 
R4
SDIO_RSP_R4_18V_PRESENT = (1 shl 24);  
SDIO_RSP_R4_MEMORY_PRESENT = (1 shl 27);  
 
R5
SDIO_RSP_R5_COM_CRC_ERROR = (1 shl 15);  
SDIO_RSP_R5_ILLEGAL_COMMAND = (1 shl 14);  
SDIO_RSP_R5_ERROR = (1 shl 11);  
SDIO_RSP_R5_FUNCTION_NUMBER = (1 shl 9);  
SDIO_RSP_R5_OUT_OF_RANGE = (1 shl 8);  


SDIO card common control registers (CCCR) SDIO_CCCR_*
SDIO_CCCR_CCCR = $00;  
SDIO_CCCR_SD = $01;  
SDIO_CCCR_IOEx = $02;  
SDIO_CCCR_IORx = $03;  
SDIO_CCCR_IENx = $04; Function/Master Interrupt Enable
SDIO_CCCR_INTx = $05; Function Interrupt Pending
SDIO_CCCR_ABORT = $06; Function abort/card reset
SDIO_CCCR_IF = $07; Bus interface controls
SDIO_CCCR_CAPS = $08;  
SDIO_CCCR_CIS = $09; Common CIS pointer (3 bytes)
Following 4 regs are valid only if SBS is set
SDIO_CCCR_SUSPEND = $0c;  
SDIO_CCCR_SELx = $0d;  
SDIO_CCCR_EXECx = $0e;  
SDIO_CCCR_READYx = $0f;  
SDIO_CCCR_BLKSIZE = $10;  
SDIO_CCCR_POWER = $12;  
SDIO_CCCR_SPEED = $13;  
SDIO_CCCR_UHS = $14;  
SDIO_CCCR_DRIVE_STRENGTH = $15;  


SDIO revision SDIO_*_REV_*
SDIO CCCR Register values
SDIO_CCCR_REV_1_00 = 0; CCCR/FBR Version 1.00
SDIO_CCCR_REV_1_10 = 1; CCCR/FBR Version 1.10
SDIO_CCCR_REV_1_20 = 2; CCCR/FBR Version 1.20
SDIO_CCCR_REV_3_00 = 3; CCCR/FBR Version 3.00
 
SDIO_SDIO_REV_1_00 = 0; SDIO Spec Version 1.00
SDIO_SDIO_REV_1_10 = 1; SDIO Spec Version 1.10
SDIO_SDIO_REV_1_20 = 2; SDIO Spec Version 1.20
SDIO_SDIO_REV_2_00 = 3; SDIO Spec Version 2.00
SDIO_SDIO_REV_3_00 = 4; SDIO Spec Version 3.00
 
SDIO CCCR SD Register values
SDIO_SD_REV_1_01 = 0; SD Physical Spec Version 1.01
SDIO_SD_REV_1_10 = 1; SD Physical Spec Version 1.10
SDIO_SD_REV_2_00 = 2; SD Physical Spec Version 2.00
SDIO_SD_REV_3_00 = 3; SD Physical Spev Version 3.00


SDIO bus width SDIO_BUS_*
SDIO CCCR IF Register values
SDIO_BUS_WIDTH_MASK = $03; Data bus width setting
SDIO_BUS_WIDTH_1BIT = $00;  
SDIO_BUS_WIDTH_RESERVED = $01;  
SDIO_BUS_WIDTH_4BIT = $02;  
SDIO_BUS_ECSI = $20; Enable continuous SPI interrupt
SDIO_BUS_SCSI = $40; Support continuous SPI interrupt
 
SDIO_BUS_ASYNC_INT = $20;  
 
SDIO_BUS_CD_DISABLE = $80; disable pull-up on DAT3 (pin 1)


SDIO CCCR caps register value SDIO_CCCR_CAP_*
SDIO_CCCR_CAP_SDC = $01; Can do CMD52 while data transfer
SDIO_CCCR_CAP_SMB = $02; Can do multi-block xfers (CMD53)
SDIO_CCCR_CAP_SRW = $04; Supports read-wait protocol
SDIO_CCCR_CAP_SBS = $08; Supports suspend/resume
SDIO_CCCR_CAP_S4MI = $10; Interrupt during 4-bit CMD53
SDIO_CCCR_CAP_E4MI = $20; Enable ints during 4-bit CMD53
SDIO_CCCR_CAP_LSC = $40; Low speed card
SDIO_CCCR_CAP_4BLS = $80; 4 bit low speed card


SDIO CCCR power register value SDIO_POWER_*
SDIO_POWER_SMPC = $01; Supports Master Power Control
SDIO_POWER_EMPC = $02; Enable Master Power Control


SDIO CCCR speed register value SDIO_SPEED_*
SDIO_SPEED_SHS = $01; Supports High-Speed mode
SDIO_SPEED_BSS_SHIFT = 1;  
SDIO_SPEED_BSS_MASK = (7 shl SDIO_SPEED_BSS_SHIFT);  
SDIO_SPEED_SDR12 = (0 shl SDIO_SPEED_BSS_SHIFT);  
SDIO_SPEED_SDR25 = (1 shl SDIO_SPEED_BSS_SHIFT);  
SDIO_SPEED_SDR50 = (2 shl SDIO_SPEED_BSS_SHIFT);  
SDIO_SPEED_SDR104 = (3 shl SDIO_SPEED_BSS_SHIFT);  
SDIO_SPEED_DDR50 = (4 shl SDIO_SPEED_BSS_SHIFT);  
SDIO_SPEED_EHS = SDIO_SPEED_SDR25; Enable High-Speed


SDIO CCCR UHS register value SDIO_UHS_*
SDIO_UHS_SDR50 = $01;  
SDIO_UHS_SDR104 = $02;  
SDIO_UHS_DDR50 = $04;  


SDIO CCCR drive strength register value SDIO_DRIVE_*
SDIO_SDTx_MASK = $07;  
SDIO_DRIVE_SDTA = (1 shl 0);  
SDIO_DRIVE_SDTC = (1 shl 1);  
SDIO_DRIVE_SDTD = (1 shl 2);  
SDIO_DRIVE_DTSx_MASK = $03;  
SDIO_DRIVE_DTSx_SHIFT = 4;  
SDIO_DTSx_SET_TYPE_B = (0 shl SDIO_DRIVE_DTSx_SHIFT);  
SDIO_DTSx_SET_TYPE_A = (1 shl SDIO_DRIVE_DTSx_SHIFT);  
SDIO_DTSx_SET_TYPE_C = (2 shl SDIO_DRIVE_DTSx_SHIFT);  
SDIO_DTSx_SET_TYPE_D = (3 shl SDIO_DRIVE_DTSx_SHIFT);  


SDIO function basic register (FBR) SDIO_FBR_*
SDIO_FBR_BASE(f) ((f) * $100) Base of function f's FBRs
SDIO_FBR_STD_IF = $00;  
SDIO_FBR_STD_IF_EXT = $01;  
SDIO_FBR_POWER = $02;  
SDIO_FBR_CIS = $09; CIS pointer (3 bytes)
SDIO_FBR_CSA = $0C; CSA pointer (3 bytes)
SDIO_FBR_BLKSIZE = $10; Block size (2 bytes)
 
SDIO FBR IF Register values
SDIO_FBR_SUPPORTS_CSA = $40; Supports Code Storage Area
SDIO_FBR_ENABLE_CSA = $80; Enable Code Storage Area
 
SDIO FBR POWER Register values
SDIO_FBR_POWER_SPS = $01; Supports Power Selection
SDIO_FBR_POWER_EPS = $02; Enable (low) Power Selection


SDIO function class SDIO_CLASS_*
SDIO_CLASS_NONE = $00; Not a SDIO standard interface
SDIO_CLASS_UART = $01; Standard UART interface
SDIO_CLASS_BT_A = $02; Type-A BlueTooth std interface
SDIO_CLASS_BT_B = $03; Type-B BlueTooth std interface
SDIO_CLASS_GPS = $04; GPS standard interface
SDIO_CLASS_CAMERA = $05; Camera standard interface
SDIO_CLASS_PHS = $06; PHS standard interface
SDIO_CLASS_WLAN = $07; WLAN interface
SDIO_CLASS_ATA = $08; Embedded SDIO-ATA std interface
SDIO_CLASS_BT_AMP = $09; Type-A Bluetooth AMP interface


SDIO vendor SDIO_VENDOR_*
SDIO_VENDOR_ID_STE = $0020;  
SDIO_VENDOR_ID_INTEL = $0089;  
SDIO_VENDOR_ID_CGUYS = $0092;  
SDIO_VENDOR_ID_TI = $0097;  
SDIO_VENDOR_ID_ATHEROS = $0271;  
SDIO_VENDOR_ID_BROADCOM = $02d0;  
SDIO_VENDOR_ID_MARVELL = $02df;  
SDIO_VENDOR_ID_MEDIATEK = $037a;  
SDIO_VENDOR_ID_MICROCHIP_WILC = $0296;  
SDIO_VENDOR_ID_SIANO = $039a;  
SDIO_VENDOR_ID_RSI = $041b;  
SDIO_VENDOR_ID_TI_WL1251 = $104c;  


SDIO device SDIO_DEVICE_*
SDIO_DEVICE_ID_STE_CW1200 = $2280;  
 
SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX = $1402;  
SDIO_DEVICE_ID_INTEL_IWMC3200WIFI = $1403;  
SDIO_DEVICE_ID_INTEL_IWMC3200TOP = $1404;  
SDIO_DEVICE_ID_INTEL_IWMC3200GPS = $1405;  
SDIO_DEVICE_ID_INTEL_IWMC3200BT = $1406;  
SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5 = $1407;  
 
SDIO_DEVICE_ID_CGUYS_EW_CG1102GC = $0004;  
 
SDIO_DEVICE_ID_TI_WL1271 = $4076;  
 
SDIO_DEVICE_ID_ATHEROS_AR6003_00 = $0300;  
SDIO_DEVICE_ID_ATHEROS_AR6003_01 = $0301;  
SDIO_DEVICE_ID_ATHEROS_AR6004_00 = $0400;  
SDIO_DEVICE_ID_ATHEROS_AR6004_01 = $0401;  
SDIO_DEVICE_ID_ATHEROS_AR6004_02 = $0402;  
SDIO_DEVICE_ID_ATHEROS_AR6004_18 = $0418;  
SDIO_DEVICE_ID_ATHEROS_AR6004_19 = $0419;  
SDIO_DEVICE_ID_ATHEROS_AR6005 = $050A;  
SDIO_DEVICE_ID_ATHEROS_QCA9377 = $0701;  
 
SDIO_DEVICE_ID_BROADCOM_NINTENDO_WII = $044b;  
SDIO_DEVICE_ID_BROADCOM_43241 = $4324;  
SDIO_DEVICE_ID_BROADCOM_4329 = $4329;  
SDIO_DEVICE_ID_BROADCOM_4330 = $4330;  
SDIO_DEVICE_ID_BROADCOM_4334 = $4334;  
SDIO_DEVICE_ID_BROADCOM_4335_4339 = $4335;  
SDIO_DEVICE_ID_BROADCOM_4339 = $4339;  
SDIO_DEVICE_ID_BROADCOM_4345 = $4345;  
SDIO_DEVICE_ID_BROADCOM_4354 = $4354;  
SDIO_DEVICE_ID_BROADCOM_CYPRESS_89359 = $4355;  
SDIO_DEVICE_ID_BROADCOM_4356 = $4356;  
SDIO_DEVICE_ID_BROADCOM_4359 = $4359;  
SDIO_DEVICE_ID_BROADCOM_CYPRESS_4373 = $4373;  
SDIO_DEVICE_ID_BROADCOM_CYPRESS_43012 = $a804;  
SDIO_DEVICE_ID_BROADCOM_43143 = $a887;  
SDIO_DEVICE_ID_BROADCOM_43340 = $a94c;  
SDIO_DEVICE_ID_BROADCOM_43341 = $a94d;  
SDIO_DEVICE_ID_BROADCOM_43362 = $a962;  
SDIO_DEVICE_ID_BROADCOM_43364 = $a9a4;  
SDIO_DEVICE_ID_BROADCOM_43430 = $a9a6;  
SDIO_DEVICE_ID_BROADCOM_43455 = $a9bf;  
 
SDIO_DEVICE_ID_MARVELL_LIBERTAS = $9103;  
SDIO_DEVICE_ID_MARVELL_8688_WLAN = $9104;  
SDIO_DEVICE_ID_MARVELL_8688_BT = $9105;  
SDIO_DEVICE_ID_MARVELL_8786_WLAN = $9116;  
SDIO_DEVICE_ID_MARVELL_8787_WLAN = $9119;  
SDIO_DEVICE_ID_MARVELL_8787_BT = $911a;  
SDIO_DEVICE_ID_MARVELL_8787_BT_AMP = $911b;  
SDIO_DEVICE_ID_MARVELL_8797_F0 = $9128;  
SDIO_DEVICE_ID_MARVELL_8797_WLAN = $9129;  
SDIO_DEVICE_ID_MARVELL_8797_BT = $912a;  
SDIO_DEVICE_ID_MARVELL_8897_WLAN = $912d;  
SDIO_DEVICE_ID_MARVELL_8897_BT = $912e;  
SDIO_DEVICE_ID_MARVELL_8887_F0 = $9134;  
SDIO_DEVICE_ID_MARVELL_8887_WLAN = $9135;  
SDIO_DEVICE_ID_MARVELL_8887_BT = $9136;  
SDIO_DEVICE_ID_MARVELL_8801_WLAN = $9139;  
SDIO_DEVICE_ID_MARVELL_8997_F0 = $9140;  
SDIO_DEVICE_ID_MARVELL_8997_WLAN = $9141;  
SDIO_DEVICE_ID_MARVELL_8997_BT = $9142;  
SDIO_DEVICE_ID_MARVELL_8977_WLAN = $9145;  
SDIO_DEVICE_ID_MARVELL_8977_BT = $9146;  
SDIO_DEVICE_ID_MARVELL_8987_WLAN = $9149;  
SDIO_DEVICE_ID_MARVELL_8987_BT = $914a;  
 
SDIO_DEVICE_ID_MEDIATEK_MT7663 = $7663;  
SDIO_DEVICE_ID_MEDIATEK_MT7668 = $7668;  
 
SDIO_DEVICE_ID_MICROCHIP_WILC1000 = $5347;  
 
SDIO_DEVICE_ID_SIANO_NOVA_B0 = $0201;  
SDIO_DEVICE_ID_SIANO_NICE = $0202;  
SDIO_DEVICE_ID_SIANO_VEGA_A0 = $0300;  
SDIO_DEVICE_ID_SIANO_VENICE = $0301;  
SDIO_DEVICE_ID_SIANO_MING = $0302;  
SDIO_DEVICE_ID_SIANO_PELE = $0500;  
SDIO_DEVICE_ID_SIANO_RIO = $0600;  
SDIO_DEVICE_ID_SIANO_DENVER_2160 = $0700;  
SDIO_DEVICE_ID_SIANO_DENVER_1530 = $0800;  
SDIO_DEVICE_ID_SIANO_NOVA_A0 = $1100;  
SDIO_DEVICE_ID_SIANO_STELLAR = $5347;  
 
SDIO_DEVICE_ID_TI_WL1251 = $9066;  


SDIO CIS tuple code CISTPL_*
CISTPL_NULL = $00;  
CISTPL_CHECKSUM = $10;  
CISTPL_VERS_1 = $15;  
CISTPL_ALTSTR = $16;  
CISTPL_MANFID = $20;  
CISTPL_FUNCID = $21;  
CISTPL_FUNCE = $22;  
CISTPL_SDIO_STD = $91;  
CISTPL_SDIO_EXT = $92;  
CISTPL_END = $FF;  
 
SDIO_MAX_FUNCTIONS = 7;  
 
SDIO_READ_CIS_TIMEOUT_MS = (10 * 1000); 10 seconds


SDHCI specific constants SDHCI_*
SDHCI_NAME_PREFIX = 'SDHCI'; Name prefix for SDHCI Devices


SDHCI host type SDHCI_TYPE_*
SDHCI_TYPE_NONE = 0;  
SDHCI_TYPE_MMC = 1; An MMC specification host controller
SDHCI_TYPE_SD = 2; An SD specification host controller
SDHCI_TYPE_MMCI = 3; An MMCI specification host controller
 
SDHCI_TYPE_MAX = 3;  
 
SDHCI Type Names
SDHCI_TYPE_NAMES:array[SDHCI_TYPE_NONE..SDHCI_TYPE_MAX] of String = (
'SDHCI_TYPE_NONE',  
'SDHCI_TYPE_MMC',  
'SDHCI_TYPE_SD',  
'SDHCI_TYPE_MMCI');  


SDHCI host state SDHCI_STATE_*
SDHCI_STATE_DISABLED = 0;  
SDHCI_STATE_ENABLED = 1;  
 
SDHCI_STATE_MAX = 1;  
 
SDHCI State Names
SDHCI_STATE_NAMES:array[SDHCI_STATE_DISABLED..SDHCI_STATE_MAX] of String = (
'SDHCI_STATE_DISABLED',  
'SDHCI_STATE_ENABLED');  


SDHCI host flag SDHCI_FLAG_*
SDHCI_FLAG_NONE = $00000000;  
SDHCI_FLAG_SDMA = $00000001; Host Controller supports SDMA specification
SDHCI_FLAG_ADMA = $00000002; Host Controller supports ADMA specification
SDHCI_FLAG_SPI = $00000004; Host Controller uses SPI interface
SDHCI_FLAG_CRC_ENABLE = $00000008;  
SDHCI_FLAG_NON_STANDARD = $00000010; Host Controller uses a non standard interface (not supporting SDHCI register layout)
SDHCI_FLAG_AUTO_CMD12 = $00000020; Host Controller supports Auto CMD12 (Stop Transmission)
SDHCI_FLAG_AUTO_CMD23 = $00000040; Host Controller supports Auto CMD23 (Set Block Count)
SDHCI_FLAG_64_BIT_DMA = $00000080; Host Controller supports 64-bit ADMA
SDHCI_FLAG_EXTERNAL_DMA = $00000100; Host Controller requires external DMA engine to perform transfers
SDHCI_FLAG_BUS_ADDRESSES = $00000200; Host Controller requires use of bus addresses for SDMA/ADMA transfers


SDHCI controller register SDHCI_DMA_*, SDHCI_BLOCK_*
SDHCI_DMA_ADDRESS = $00;  
SDHCI_ARGUMENT2 = SDHCI_DMA_ADDRESS;  
SDHCI_32BIT_BLK_CNT = SDHCI_DMA_ADDRESS;  
SDHCI_BLOCK_SIZE = $04;  
SDHCI_BLOCK_COUNT = $06;  
SDHCI_ARGUMENT = $08;  
SDHCI_TRANSFER_MODE = $0C;  
SDHCI_COMMAND = $0E;  
SDHCI_RESPONSE = $10;  
SDHCI_BUFFER = $20;  
SDHCI_PRESENT_STATE = $24;  
SDHCI_HOST_CONTROL = $28;  
SDHCI_POWER_CONTROL = $29;  
SDHCI_BLOCK_GAP_CONTROL = $2A;  
SDHCI_WAKE_UP_CONTROL = $2B;  
SDHCI_CLOCK_CONTROL = $2C;  
SDHCI_TIMEOUT_CONTROL = $2E;  
SDHCI_SOFTWARE_RESET = $2F;  
SDHCI_INT_STATUS = $30;  
SDHCI_INT_ENABLE = $34;  
SDHCI_SIGNAL_ENABLE = $38;  
SDHCI_AUTO_CMD_STATUS = $3C; {SDHCI_ACMD12_ERR
SDHCI_HOST_CONTROL2 = $3E;  
SDHCI_CAPABILITIES = $40;  
SDHCI_CAPABILITIES_1 = $44;  
SDHCI_MAX_CURRENT = $48;  
4C-4F reserved for more max current
SDHCI_SET_ACMD12_ERROR= $50;  
SDHCI_SET_INT_ERROR = $52;  
SDHCI_ADMA_ERROR = $54;  
55-57 reserved
SDHCI_ADMA_ADDRESS = $58;  
SDHCI_ADMA_ADDRESS_HI = $5C;  
5D-65 reserved
SDHCI_PRESET_FOR_SDR12 = $66;  
SDHCI_PRESET_FOR_SDR25 = $68;  
SDHCI_PRESET_FOR_SDR50 = $6A;  
SDHCI_PRESET_FOR_SDR104 = $6C;  
SDHCI_PRESET_FOR_DDR50 = $6E;  
6F-73 reserved
SDHCI_PRESET_FOR_HS400 = $74; Non-standard
75-FB reserved
SDHCI_SLOT_INT_STATUS = $FC;  
SDHCI_HOST_VERSION = $FE;  


SDHCI transfer mode SDHCI_TRNS_*
SDHCI_TRNS_DMA = $01;  
SDHCI_TRNS_BLK_CNT_EN = $02;  
SDHCI_TRNS_AUTO_CMD12 = $04; SDHCI_TRNS_ACMD12
SDHCI_TRNS_AUTO_CMD23 = $08;  
SDHCI_TRNS_AUTO_SEL = SDHCI_TRNS_AUTO_CMD12 or SDHCI_TRNS_AUTO_CMD23;  
SDHCI_TRNS_READ = $10;  
SDHCI_TRNS_MULTI = $20;  


SDHCI command value SDHCI_CMD_*
SDHCI_CMD_RESP_MASK = $03;  
SDHCI_CMD_CRC = $08;  
SDHCI_CMD_INDEX = $10;  
SDHCI_CMD_DATA = $20;  
SDHCI_CMD_ABORTCMD = $C0;  


SDHCI command response value SDHCI_CMD_RESP_*
SDHCI_CMD_RESP_NONE = $00;  
SDHCI_CMD_RESP_LONG = $01;  
SDHCI_CMD_RESP_SHORT = $02;  
SDHCI_CMD_RESP_SHORT_BUSY = $03;  


SDHCI present state value SDHCI_DATA_*, SDHCI_CARD_*
SDHCI_CMD_INHIBIT = $00000001;  
SDHCI_DATA_INHIBIT = $00000002;  
SDHCI_DOING_WRITE = $00000100;  
SDHCI_DOING_READ = $00000200;  
SDHCI_SPACE_AVAILABLE = $00000400;  
SDHCI_DATA_AVAILABLE = $00000800;  
SDHCI_CARD_PRESENT = $00010000;  
SDHCI_CARD_STATE_STABLE = $00020000; SDHCI_CD_STABLE
SDHCI_CARD_DETECT_PIN_LEVEL = $00040000; SDHCI_CD_LVL
SDHCI_WRITE_PROTECT = $00080000; Set if Write Enabled/Clear if Write Protected
SDHCI_DATA_LEVEL_MASK = $00F00000; SDHCI_DATA_LVL_MASK
SDHCI_DATA_0_LEVEL_MASK = $00100000; SDHCI_DATA_0_LVL_MASK
SDHCI_CMD_LEVEL = $01000000; SDHCI_CMD_LVL


SDHCI host control value SDHCI_CTRL_*
SDHCI_CTRL_LED = $01;  
SDHCI_CTRL_4BITBUS = $02;  
SDHCI_CTRL_HISPD = $04;  
SDHCI_CTRL_DMA_MASK = $18;  
SDHCI_CTRL_SDMA = $00;  
SDHCI_CTRL_ADMA1 = $08;  
SDHCI_CTRL_ADMA32 = $10;  
SDHCI_CTRL_ADMA64 = $18;  
SDHCI_CTRL_ADMA3 = $18;  
SDHCI_CTRL_8BITBUS = $20;  
SDHCI_CTRL_CD_TEST_INS = $40;  
SDHCI_CTRL_CD_TEST = $80;  


SDHCI power control value SDHCI_POWER_*
SDHCI_POWER_ON = $01;  
SDHCI_POWER_180 = $0A;  
SDHCI_POWER_300 = $0C;  
SDHCI_POWER_330 = $0E;  


SDHCI wakeup control value SDHCI_WAKE_*
SDHCI_WAKE_ON_INT = $01;  
SDHCI_WAKE_ON_INSERT = $02;  
SDHCI_WAKE_ON_REMOVE = $04;  


SDHCI clock control value SDHCI_CLOCK_*
SDHCI_DIVIDER_SHIFT = 8;  
SDHCI_DIVIDER_HI_SHIFT = 6;  
SDHCI_DIV_MASK = $FF;  
SDHCI_DIV_MASK_LEN = 8;  
SDHCI_DIV_HI_MASK = $0300;  
SDHCI_PROG_CLOCK_MODE = $0020;  
SDHCI_CLOCK_CARD_EN = $0004;  
SDHCI_CLOCK_PLL_EN = $0008;  
SDHCI_CLOCK_INT_STABLE = $0002;  
SDHCI_CLOCK_INT_EN = $0001;  


SDHCI software reset value SDHCI_RESET_*
SDHCI_RESET_ALL = $01;  
SDHCI_RESET_CMD = $02;  
SDHCI_RESET_DATA = $04;  


SDHCI interrupt value SDHCI_INT_*
SDHCI_INT_RESPONSE = $00000001;  
SDHCI_INT_DATA_END = $00000002;  
SDHCI_INT_BLK_GAP = $00000004;  
SDHCI_INT_DMA_END = $00000008;  
SDHCI_INT_SPACE_AVAIL = $00000010;  
SDHCI_INT_DATA_AVAIL = $00000020;  
SDHCI_INT_CARD_INSERT = $00000040;  
SDHCI_INT_CARD_REMOVE = $00000080;  
SDHCI_INT_CARD_INT = $00000100;  
SDHCI_INT_RETUNE = $00001000;  
SDHCI_INT_CQE = $00004000;  
SDHCI_INT_ERROR = $00008000;  
SDHCI_INT_TIMEOUT = $00010000;  
SDHCI_INT_CRC = $00020000;  
SDHCI_INT_END_BIT = $00040000;  
SDHCI_INT_INDEX = $00080000;  
SDHCI_INT_DATA_TIMEOUT = $00100000;  
SDHCI_INT_DATA_CRC = $00200000;  
SDHCI_INT_DATA_END_BIT = $00400000;  
SDHCI_INT_BUS_POWER = $00800000;  
SDHCI_INT_AUTO_CMD_ERR= $01000000; SDHCI_INT_ACMD12ERR
SDHCI_INT_ADMA_ERROR = $02000000;  
 
SDHCI_INT_NORMAL_MASK = $00007FFF;  
SDHCI_INT_ERROR_MASK = $FFFF8000;  
 
SDHCI_INT_CMD_MASK = (SDHCI_INT_RESPONSE or SDHCI_INT_TIMEOUT or SDHCI_INT_CRC or SDHCI_INT_END_BIT or SDHCI_INT_INDEX or SDHCI_INT_AUTO_CMD_ERR);
SDHCI_INT_DATA_MASK = (SDHCI_INT_DATA_END or SDHCI_INT_DMA_END or SDHCI_INT_DATA_AVAIL or SDHCI_INT_SPACE_AVAIL or SDHCI_INT_DATA_TIMEOUT or SDHCI_INT_DATA_CRC or SDHCI_INT_DATA_END_BIT or SDHCI_INT_ADMA_ERROR or SDHCI_INT_BLK_GAP);
SDHCI_INT_ALL_MASK = (LongWord(-1));  
SDHCI_CQE_INT_ERR_MASK = (SDHCI_INT_ADMA_ERROR or SDHCI_INT_BUS_POWER or SDHCI_INT_DATA_END_BIT or SDHCI_INT_DATA_CRC or SDHCI_INT_DATA_TIMEOUT or SDHCI_INT_INDEX or SDHCI_INT_END_BIT or SDHCI_INT_CRC or SDHCI_INT_TIMEOUT);  
SDHCI_CQE_INT_MASK = (SDHCI_CQE_INT_ERR_MASK or SDHCI_INT_CQE);  


SDHCI auto CMD status value SDHCI_AUTO_CMD_*
SDHCI_AUTO_CMD_TIMEOUT = $00000002;  
SDHCI_AUTO_CMD_CRC = $00000004;  
SDHCI_AUTO_CMD_END_BIT = $00000008;  
SDHCI_AUTO_CMD_INDEX = $00000010;  


SDHCI host control 2 value SDHCI_CTRL_*
SDHCI_CTRL_UHS_MASK = $0007;  
SDHCI_CTRL_UHS_SDR12 = $0000;  
SDHCI_CTRL_UHS_SDR25 = $0001;  
SDHCI_CTRL_UHS_SDR50 = $0002;  
SDHCI_CTRL_UHS_SDR104 = $0003;  
SDHCI_CTRL_UHS_DDR50 = $0004;  
SDHCI_CTRL_HS400 = $0005; Non-standard
SDHCI_CTRL_VDD_180 = $0008;  
SDHCI_CTRL_DRV_TYPE_MASK = $0030;  
SDHCI_CTRL_DRV_TYPE_B = $0000;  
SDHCI_CTRL_DRV_TYPE_A = $0010;  
SDHCI_CTRL_DRV_TYPE_C = $0020;  
SDHCI_CTRL_DRV_TYPE_D = $0030;  
SDHCI_CTRL_EXEC_TUNING = $0040;  
SDHCI_CTRL_TUNED_CLK = $0080;  
SDHCI_CMD23_ENABLE = $0800;  
SDHCI_CTRL_V4_MODE = $1000;  
SDHCI_CTRL_64BIT_ADDR = $2000;  
SDHCI_CTRL_PRESET_VAL_ENABLE = $8000;  


SDHCI capabilities value SDHCI_*_MASK*, SDHCI_*SHIFT
SDHCI_TIMEOUT_CLK_MASK = $0000003F;  
SDHCI_TIMEOUT_CLK_SHIFT = 0;  
SDHCI_TIMEOUT_CLK_UNIT = $00000080;  
SDHCI_CLOCK_BASE_MASK = $00003F00;  
SDHCI_CLOCK_V3_BASE_MASK = $0000FF00;  
SDHCI_CLOCK_BASE_SHIFT = 8;  
SDHCI_CLOCK_BASE_MULTIPLIER = 1000000;  
SDHCI_MAX_BLOCK_MASK = $00030000;  
SDHCI_MAX_BLOCK_SHIFT = 16;  
SDHCI_CAN_DO_8BIT = $00040000;  
SDHCI_CAN_DO_ADMA2 = $00080000;  
SDHCI_CAN_DO_ADMA1 = $00100000;  
SDHCI_CAN_DO_HISPD = $00200000;  
SDHCI_CAN_DO_SDMA = $00400000;  
SDHCI_CAN_VDD_330 = $01000000;  
SDHCI_CAN_VDD_300 = $02000000;  
SDHCI_CAN_VDD_180 = $04000000;  
SDHCI_CAN_64BIT_V4 = $08000000;  
SDHCI_CAN_64BIT = $10000000;  


SDHCI capabilities 1 value SDHCI_SUPPORT_*
SDHCI_SUPPORT_SDR50 = $00000001;  
SDHCI_SUPPORT_SDR104 = $00000002;  
SDHCI_SUPPORT_DDR50 = $00000004;  
SDHCI_DRIVER_TYPE_A = $00000010;  
SDHCI_DRIVER_TYPE_C = $00000020;  
SDHCI_DRIVER_TYPE_D = $00000040;  
SDHCI_RETUNING_TIMER_COUNT_MASK = $00000F00; GENMASK(11,8)
SDHCI_USE_SDR50_TUNING = $00002000;  
SDHCI_RETUNING_MODE_MASK = $0000C000; GENMASK(15,14)
SDHCI_CLOCK_MUL_MASK = $00FF0000; GENMASK(23,16)
SDHCI_CAN_DO_ADMA3 = $08000000;  
SDHCI_SUPPORT_HS400 = $80000000; Non-standard


SDHCI max current value SDHCI_MAX_CURRENT_*
SDHCI_MAX_CURRENT_LIMIT = $000000FF; GENMASK(7,0)
SDHCI_MAX_CURRENT_330_MASK = $000000FF; GENMASK(7,0)
SDHCI_MAX_CURRENT_300_MASK = $0000FF00; GENMASK(15,8)
SDHCI_MAX_CURRENT_180_MASK = $00FF0000; GENMASK(23,16)
SDHCI_MAX_CURRENT_MULTIPLIER = 4;  


SDHCI preset value SDHCI_PRESET_*
SDHCI_PRESET_DRV_MASK = $0000C000; GENMASK(15,14)
SDHCI_PRESET_DRV_SHIFT = 14;  
SDHCI_PRESET_CLKGEN_SEL = 1 shl 10; BIT(10)
SDHCI_PRESET_SDCLK_FREQ_MASK = $000003FF; GENMASK(9,0)


SDHCI host version value SDHCI_*_VER_*
SDHCI_VENDOR_VER_MASK = $FF00;  
SDHCI_VENDOR_VER_SHIFT = 8;  
SDHCI_SPEC_VER_MASK = $00FF;  
SDHCI_SPEC_VER_SHIFT = 0;  
SDHCI_SPEC_100 = 0;  
SDHCI_SPEC_200 = 1;  
SDHCI_SPEC_300 = 2;  
SDHCI_SPEC_400 = 3;  
SDHCI_SPEC_410 = 4;  
SDHCI_SPEC_420 = 5;  


SDHCI clock divider SDHCI_MAX_CLOCK_DIV_*
SDHCI_MAX_CLOCK_DIV_SPEC_200 = 256;  
SDHCI_MAX_CLOCK_DIV_SPEC_300 = 2046;  


SDHCI quirks/bug SDHCI_QUIRK*
From Linux /include/linux/mmc/sdhci.h
SDHCI_QUIRK_CLOCK_BEFORE_RESET = (1 shl 0); Controller doesn't honor resets unless we touch the clock register
SDHCI_QUIRK_FORCE_DMA = (1 shl 1); Controller has bad caps bits, but really supports DMA
SDHCI_QUIRK_NO_CARD_NO_RESET = (1 shl 2); Controller doesn't like to be reset when there is no card inserted
SDHCI_QUIRK_SINGLE_POWER_WRITE = (1 shl 3); Controller doesn't like clearing the power reg before a change
SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS = (1 shl 4); Controller has flaky internal state so reset it on each ios change
SDHCI_QUIRK_BROKEN_DMA = (1 shl 5); Controller has an unusable DMA engine
SDHCI_QUIRK_BROKEN_ADMA = (1 shl 6); Controller has an unusable ADMA engine
SDHCI_QUIRK_32BIT_DMA_ADDR = (1 shl 7); Controller can only DMA from 32-bit aligned addresses
SDHCI_QUIRK_32BIT_DMA_SIZE = (1 shl 8); Controller can only DMA chunk sizes that are a multiple of 32 bits
SDHCI_QUIRK_32BIT_ADMA_SIZE = (1 shl 9); Controller can only ADMA chunks that are a multiple of 32 bits
SDHCI_QUIRK_RESET_AFTER_REQUEST = (1 shl 10); Controller needs to be reset after each request to stay stable
SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER = (1 shl 11); Controller needs voltage and power writes to happen separately
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL = (1 shl 12); Controller provides an incorrect timeout value for transfers
SDHCI_QUIRK_BROKEN_SMALL_PIO = (1 shl 13); Controller has an issue with buffer bits for small transfers
SDHCI_QUIRK_NO_BUSY_IRQ = (1 shl 14); Controller does not provide transfer-complete interrupt when not busy
SDHCI_QUIRK_BROKEN_CARD_DETECTION = (1 shl 15); Controller has unreliable card detection
SDHCI_QUIRK_INVERTED_WRITE_PROTECT = (1 shl 16); Controller reports inverted write-protect state
SDHCI_QUIRK_PIO_NEEDS_DELAY = (1 shl 18); Controller does not like fast PIO transfers
SDHCI_QUIRK_FORCE_BLK_SZ_2048 = (1 shl 20); Controller has to be forced to use block size of 2048 bytes
SDHCI_QUIRK_NO_MULTIBLOCK = (1 shl 21); Controller cannot do multi-block transfers
SDHCI_QUIRK_FORCE_1_BIT_DATA = (1 shl 22); Controller can only handle 1-bit data transfers
SDHCI_QUIRK_DELAY_AFTER_POWER = (1 shl 23); Controller needs 10ms delay between applying power and clock
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK = (1 shl 24); Controller uses SDCLK instead of TMCLK for data timeouts
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN = (1 shl 25); Controller reports wrong base clock capability
SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC = (1 shl 26); Controller cannot support End Attribute in NOP ADMA descriptor
SDHCI_QUIRK_MISSING_CAPS = (1 shl 27); Controller is missing device caps. Use caps provided by host
SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 = (1 shl 28); Controller uses Auto CMD12 command to stop the transfer
SDHCI_QUIRK_NO_HISPD_BIT = (1 shl 29); Controller doesn't have HISPD bit field in HI-SPEED SD card
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC = (1 shl 30); Controller treats ADMA descriptors with length 0000h incorrectly
SDHCI_QUIRK_UNSTABLE_RO_DETECT = (1 shl 31); The read-only detection via SDHCI_PRESENT_STATE register is unstable
 
SDHCI_QUIRK2_HOST_OFF_CARD_ON = (1 shl 0);  
SDHCI_QUIRK2_HOST_NO_CMD23 = (1 shl 1);  
SDHCI_QUIRK2_NO_1_8_V = (1 shl 2); The system physically doesn't support 1.8v, even if the host does
SDHCI_QUIRK2_PRESET_VALUE_BROKEN = (1 shl 3);  
SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON = (1 shl 4);  
SDHCI_QUIRK2_BROKEN_HOST_CONTROL = (1 shl 5); Controller has a non-standard host control register
SDHCI_QUIRK2_BROKEN_HS200 = (1 shl 6); Controller does not support HS200
SDHCI_QUIRK2_BROKEN_DDR50 = (1 shl 7); Controller does not support DDR50
SDHCI_QUIRK2_STOP_WITH_TC = (1 shl 8); Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY
SDHCI_QUIRK2_BROKEN_64_BIT_DMA = (1 shl 9); Controller does not support 64-bit DMA
SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD = (1 shl 10); Need clear transfer mode register before send cmd
SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 = (1 shl 11); Capability register bit-63 indicates HS400 support
SDHCI_QUIRK2_TUNING_WORK_AROUND = (1 shl 12); Forced tuned clock
SDHCI_QUIRK2_SUPPORT_SINGLE = (1 shl 13); Disable the block count for single block transactions
SDHCI_QUIRK2_ACMD23_BROKEN = (1 shl 14); Controller broken with using ACMD23
SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN = (1 shl 15); Broken Clock divider zero in controller
SDHCI_QUIRK2_RSP_136_HAS_CRC = (1 shl 16); Controller has CRC in 136 bit Command Response
SDHCI_QUIRK2_DISABLE_HW_TIMEOUT = (1 shl 17); Disable HW timeout if the requested timeout is more than the maximum obtainable timeout
SDHCI_QUIRK2_USE_32BIT_BLK_CNT = (1 shl 18); 32-bit block count may not support eMMC where upper bits of CMD23 are used for other purposes. Support 16-bit block count by default otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit block count


SDHCI host SDMA buffer boundary SDHCI_DEFAULT_BOUNDARY_*
Valid values from 4K to 512K in powers of 2
 
SDHCI_DEFAULT_BOUNDARY_SIZE = (512 * 1024); Default to 512K boundary
SDHCI_DEFAULT_BOUNDARY_ARG = 7; (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)


SDHCI ADMA2 32-bit DMA descriptor size SDHCI_ADMA2_32_DESC_SIZE*
SDHCI_ADMA2_32_DESC_SIZE = 8;  


SDHCI ADMA2 data alignment SDHCI_ADMA2_ALIGN*
SDHCI_ADMA2_ALIGN = 4;  
SDHCI_ADMA2_MASK = (SDHCI_ADMA2_ALIGN - 1);  


SDHCI ADMA2 descriptor alignment SDHCI_ADMA2_DESC_ALIGN*
SDHCI_ADMA2_DESC_ALIGN = 8;  


SDHCI ADMA2 64-bit DMA descriptor size SDHCI_ADMA2_64_DESC_SIZE*
SDHCI_ADMA2_64_DESC_SIZE = 12;  
SDHCI_ADMA2_64_DESC_V4_SIZE = 16; Use 128-bit descriptor, if Host Version 4 Enable is set in the Host Control 2 register


SDHCI ADMA2 descriptor attributes SDHCI_ADMA2_DESC_ATTR_*
SDHCI_ADMA2_DESC_ATTR_VALID = $01;  
SDHCI_ADMA2_DESC_ATTR_END = $02;  
SDHCI_ADMA2_DESC_ATTR_INT = $04;  
SDHCI_ADMA2_DESC_ATTR_NOP = $00;  
SDHCI_ADMA2_DESC_ATTR_TRAN = $20;  
SDHCI_ADMA2_DESC_ATTR_LINK = $30;  
 
SDHCI_ADMA2_DESC_TRAN_VALID = SDHCI_ADMA2_DESC_ATTR_TRAN or SDHCI_ADMA2_DESC_ATTR_VALID; 0x21
SDHCI_ADMA2_DESC_NOP_END_VALID = SDHCI_ADMA2_DESC_ATTR_NOP or SDHCI_ADMA2_DESC_ATTR_END or SDHCI_ADMA2_DESC_ATTR_VALID; 0x3
SDHCI_ADMA2_DESC_END = SDHCI_ADMA2_DESC_ATTR_END; 0x2


SDHCI maximum segments SDHCI_MAX_SEGS*
Assuming a 512KB maximum request size and a minimum 4KB page size
 
SDHCI_MAX_SEGS = 128;  


SDHCI timeout value SDHCI_TIMEOUT_VALUE*
SDHCI_TIMEOUT_VALUE = $0E;  


Type definitions



MMC command

PMMCCommand = ^TMMCCommand;

TMMCCommand = record

Command Properties
Command:Word;  
Argument:LongWord;  
ResponseType:LongWord;  
Response:array[0..3] of LongWord;  
Status:LongWord;  
Data:PMMCData;  
Timeout:LongWord; Milliseconds
Host Properties
DataCompleted:Boolean;  
BusyCompleted:Boolean;  
TuningCompleted:Boolean;  
CommandCompleted:Boolean;  

MMC data

PMMCData = ^TMMCData;

TMMCData = record

Data Properties
Data:Pointer;  
Flags:LongWord;  
BlockSize:LongWord;  
BlockCount:LongWord;  
Host Properties
BlockOffset:LongWord;  
BlocksRemaining:LongWord;  
BytesRemaining:LongWord;  
BytesTransfered:LongWord;  

MMC card identification data (CID)

PMMCCardIdentificationData = ^TMMCCardIdentificationData;

TMMCCardIdentificationData = record

Note: See: Section 5.2 of SD Physical Layer Simplified Specification Version 4.10
ManufacturerId:Byte;  
OEMId:Word;  
ProductName:array[0..7] of Char; Max 0 to 6, 1 extra for null terminator
ProductRevision:Byte;  
HardwareRevision:Byte;  
FirmwareRevision:Byte;  
ProductSerialNumber:LongWord;  
ManufacturingMonth:Byte;  
ManufacturingYear:Word;  
CRC:Byte; CRC7 checksum

MMC card specific erase data (CSD)

TMMCCardSpecificSDEraseData = record

Note: See: Section 5.3 of SD Physical Layer Simplified Specification Version 4.10 (Defined here for CSD)
EraseBlockEnable:Boolean; Erase single block enable
SectorSize:Byte; Erase sector size

MMC card specific MMC22 erase data

TMMCCardSpecificMMC22EraseData = record

SectorSize:Byte; Erase sector size
EraseGroupSize:Byte; Erase group size

MMC card specific MMC31 erase data

TMMCCardSpecificMMC31EraseData = record

EraseGroupSize:Byte; Erase group size
EraseGroupMultiplier:Byte; Erase group size multiplier

MMC card specific erase data

TMMCCardSpecificEraseData = record

case Integer of  
0:(MMC22:TMMCCardSpecificMMC22EraseData);  
1:(MMC31:TMMCCardSpecificMMC31EraseData);  
2:(SD:TMMCCardSpecificSDEraseData);  

MMC card specific data

PMMCCardSpecificData = ^TMMCCardSpecificData;

TMMCCardSpecificData = record

Card Values
CSDStructure:Byte; CSD structure version
SpecVersion:Byte; System specification version (MMC/eMMC Only)
TAAC:Byte; Data read access-time-1
NSAC:Byte; Data read access-time-2 in CLK cycles (NSAC*100)
TransferSpeed:Byte; Max. data transfer rate
CCC:Word; Card command classes
ReadBlockLength:Byte; Max. read data block length
ReadBlockPartial:Boolean; Partial blocks for read allowed
WriteBlockMisalign:Boolean; Write block misalignment
ReadBlockMisalign:Boolean; Read block misalignment
DSRImplemented:Boolean; DSR implemented
DeviceSize:LongWord; Device size
VDDReadCurrentMin:Byte; Max. read current @VDD min
VDDReadCurrentMax:Byte; Max. read current @VDD max
VDDWriteCurrentMin:Byte; Max. write current @VDD min
VDDWriteCurrentMax:Byte; Max. write current @VDD max
DeviceSizeMultiplier:Byte; Device size multiplier
Erase:TMMCCardSpecificEraseData; Erase group details
WriteProtectGroupSize:Byte; Write protect group size
WriteProtectGroupEnable:Boolean; Write protect group enable
DefaultECC:Byte; Manufacturer default ECC (MMC/eMMC Only)
ReadToWriteFactor:Byte; Write speed factor
WriteBlockLength:Byte; Max. write data block length
WriteBlockPartial:Boolean; Partial blocks for write allowed
ContentProtectApplication:Boolean; Content protection application (MMC/eMMC Only)
FileFormatGroup:Byte; File format group
CopyFlag:Boolean; Copy flag
PermanentWriteProtect:Boolean; Permanent write protection
TemporaryWriteProtect:Boolean; Temporary write protection
FileFormat:Byte; File format
ECC:Byte; ECC code (MMC/eMMC Only)
CRC:Byte; CRC
Calculated Values
DataAccessTime:LongWord; In Nanoseconds
DataAccessClocks:Word; In Clock cycles
DataTransferRate:LongWord; In Hz
EraseSize:LongWord; In Sectors
BlockSize:LongWord; "Normalized" Block Size
BlockCount:LongWord; In "Normalized" Blocks
BlockShift:LongWord; "Normalized" Block Shift

MMC extended card specific data

PMMCExtendedCardSpecificData = ^TMMCExtendedCardSpecificData;

TMMCExtendedCardSpecificData = record

Card Values
Revision:Byte; Extended CSD revision (192)
 
CacheControl:Byte; Control to turn the Cache ON/OFF (33)
PowerOffNotification:Byte; Power Off Notification (34)
 
PartitionSupport:Byte; Partitioning Support (160)
HardwareResetFunction:Byte; H/W reset function (162])
WriteReliabilityParameter:Byte; Write reliability parameter register (166])
 
RPMBSizeMult:Byte; RPMB Size Multiplier (168)
EraseGroupDef:Byte; High-density erase group definition (175)
PartConfig:Byte; Partition configuration (179)
ErasedMemoryContent:Byte; Erased memory content (181)
StrobeSupport:Byte; Strobe Support (184)
CSDStructure:Byte; CSD STRUCTURE (194)
CardType:Byte; Device type (196)
DriverStrength:Byte; I/O Driver Strength (197)
OutOfInterruptTime:Byte; Out-of-interrupt busy timing (198)
 
SectorCount:array[0..3] of Byte; Sector Count (212)(4 bytes)
SATimeout:Byte; Sleep/awake timeout (217)
HCEraseGapSize:Byte; High-capacity write protect group size (221)
ReliableSectors:Byte; Reliable write sector count (222)
EraseTimeoutMult:Byte; High-capacity erase timeout (223)
HCEraseGrpSize:Byte; High-capacity erase unit size (224)
SecTRIMMult:Byte; Secure TRIM Multiplier (229)
SecEraseMult:Byte; Secure Erase Multiplier (230)
SecFeatureSupport:Byte; Secure Feature support (231)
TRIMMult:Byte; TRIM Multiplier (232)
 
PowerClass52MHz195:Byte; Power class for 52 MHz at 1.95 V (200)
PowerClass26MHz195:Byte; Power class for 26 MHz at 1.95 V (201)
PowerClass52MHz360:Byte; Power class for 52 MHz at 3.6 V (202)
PowerClass26MHz360:Byte; Power class for 26 MHz at 3.6 V (203)
PowerClass200MHz195:Byte; Power class for 200MHz, at VCCQ = 1.3V, VCC = 3.6V (236)
PowerClass200MHz360:Byte; Power class for 200MHz at VCCQ = 1.95V, VCC = 3.6V (237)
PowerClassDDR52MHz195:Byte; Power class for 52MHz, DDR at VCC = 1.95V (238)
PowerClassDDR52MHz360:Byte; Power class for 52MHz, DDR at VCC = 3.6V (239)
PowerClassDDR200MHz360:Byte; Power class for 200MHz, DDR at VCC = 3.6V (253)
 
BKOPSStatus:Byte; Background operations status (246)
 
FirmwareVersion:array[0..MMC_FIRMWARE_VERSION_LEN - 1] of Byte; (254) (8 bytes)
 
PreEndOfLifeInfo:Byte; Pre EOL information (267)
DeviceLifetimeEstimateA:Byte; Device life time estimation type A (268)
DeviceLifetimeEstimateB:Byte; Device life time estimation type B (269)
 
MaxPackedWrites:Byte; Max packed write commands (500)
MaxPackedReads:Byte; Max packed read commands (501)
 
Calculated Values
Sectors:LongWord;  
SleepAwakeTime:LongWord; 100ns units
PartitionSwitchTime:LongWord; ms
GenericCMD6Time:LongWord; 10ms units
PowerOffLongTime:LongWord; ms
HCEraseSize:LongWord; Sectors
HCEraseTimeout:LongWord; Milliseconds
DataSectorSize:LongWord; 512 bytes or 4KB
DataTagUnitSize:LongWord;  
HSMaxRate:LongWord; Hz
HS200MaxRate:LongWord; Hz
AvailableTypes:LongWord;  
BootPartitionSize:UInt64; Bytes
EnhancedAreaOffset:UInt64; Bytes
EnhancedAreaSize:UInt64; KB
CacheSize:LongWord; KB
PartitionSettingCompleted:Boolean; Enable Bit
TRIMTimeout:LongWord; Milliseconds
PartitionSizes:array[0..MMC_NUM_GP_PARTITION - 1] of UInt64; Bytes
BootReadOnlySupport:LongWord; Read Only Lock Support
BootReadOnlyLockable:Boolean;  
FieldFirmwareUpdate:Boolean; Firmware upgrade support
CommandQueueSupport:Boolean; Command Queue supported
CommandQueueDepth:LongWord; Command Queue depth
BackgroundOperations:Boolean; BKOPS Supported
ManualBKOPSEnable:Boolean; Manual BKOPS Supported
AutoBKOPSEnable:Boolean; Auto BKOPS Supported
HPI:Boolean; HPI (High Priority Interrupt) Supported
HPIEnable:Boolean; HPI Enabled
HPICommand:LongWord; CMD used as HPI
RPMBSize:UInt64; Bytes
EnhancedRPMBSupport:Boolean;  
ErasedByte:Byte; Value after Erase
FeatureSupport:LongWord; Version specific features (eg MMC_DISCARD_FEATURE)

SD status data (SSR)

PSDStatusData = ^TSDStatusData;

TSDStatusData = record

Note: See: Section 4.10.2 of SD Physical Layer Simplified Specification Version 4.10 (Defined here for MMC Device)
Card Values
BusWidth:Byte; Shows the currently defined data bus width that was defined by SET_BUS_WIDTH command
SecuredMode:Boolean; Card is in Secured Mode of operation (refer to the "Part 3 Security Specification")
CardType:Word; In the future, the 8 LSBs will be used to define different variations of an SD Memory Card (Each bit will define different SD Types). The 8 MSBs will be used to define SD Cards that do not comply with the Physical Layer Specification
ProtectedSize:LongWord; Size of protected area
SpeedClass:Byte; Speed Class of the card
PerformanceMove:Byte; Performance of move indicated by 1 [MB/s] step
EraseSize:Word; Number of AUs to be erased at a time
EraseTimeout:Byte; Timeout value for erasing areas specified by UNIT_OF_ERASE_AU
EraseOffset:Byte; Fixed offset value added to erase time
UHSSpeedGrade:Byte; Speed Grade for UHS mode
Calculated Values
AllocationUnitSize:Byte; Size of Allocation Unit
UHSAllocationUnitSize:Byte; Size of Allocation Unit for UHS mode

SD switch data

PSDSwitchData = ^TSDSwitchData;

TSDSwitchData = record

Note: See: Section 4.3.10 of SD Physical Layer Simplified Specification Version 4.10
Card Values
MaximumCurrent:Word; Maximum Current/Power Consumption
Group6Support:Word; Support Bits of Functions in Function Group 6
Group5Support:Word; Support Bits of Functions in Function Group 5
Group4Support:Word; Support Bits of Functions in Function Group 4
Group3Support:Word; Support Bits of Functions in Function Group 3
Group2Support:Word; Support Bits of Functions in Function Group 2
Group1Support:Word; Support Bits of Functions in Function Group 1
Group6Selection:Byte; Function Selection of Function Group 6
Group5Selection:Byte; Function Selection of Function Group 5
Group4Selection:Byte; Function Selection of Function Group 4
Group3Selection:Byte; Function Selection of Function Group 3
Group2Selection:Byte; Function Selection of Function Group 2
Group1Selection:Byte; Function Selection of Function Group 1
StructureVersion:Byte; Data Structure Version
Group6BusyStatus:Word; Busy Status of functions in group 6
Group5BusyStatus:Word; Busy Status of functions in group 5
Group4BusyStatus:Word; Busy Status of functions in group 4
Group3BusyStatus:Word; Busy Status of functions in group 3
Group2BusyStatus:Word; Busy Status of functions in group 2
Group1BusyStatus:Word; Busy Status of functions in group 1

SD configuration data (SCR)

PSDConfigurationData = ^TSDConfigurationData;

TSDConfigurationData = record

Note: See: Section 5.6 of SD Physical Layer Simplified Specification Version 4.10 (Defined here for MMC Device)
Card Values
SCRStructure:Byte; SCR Structure version
SpecVersion:Byte; SD Memory Card - Spec. Version
DataAfterErase:Byte; Data status after erases
Security:Byte; CPRM Security Support
BusWidths:Byte; DAT Bus widths supported
SpecVersion3:Boolean; Spec. Version 3.00 or higher
ExtendedSecurity:Byte; Extended Security Support
SpecVersion4:Boolean; Spec. Version 4.00 or higher
CommandSupport:Byte; Command Support bits
Calculated Values
ErasedByte:Byte; Value after Erase

MMC device types

PMMCDevice = ^TMMCDevice;

TMMCDevice = record

Device Properties
Device:TDevice; The Device entry for this MMC
MMC Properties
MMCId:LongWord; Unique Id of this MMC in the MMC table
MMCState:LongWord; MMC state (eg MMC_STATE_INSERTED)
DeviceInitialize:TMMCDeviceInitialize; A Device specific DeviceInitialize method implementing a standard MMC device interface (Or nil if the default method is suitable)
DeviceDeinitialize:TMMCDeviceDeinitialize; A Device specific DeviceDeinitialize method implementing a standard MMC device interface (Or nil if the default method is suitable)
DeviceGetCardDetect:TMMCDeviceGetCardDetect; A Device specific DeviceGetCardDetect method implementing a standard MMC device interface (Or nil if the default method is suitable)
DeviceGetWriteProtect:TMMCDeviceGetWriteProtect; A Device specific DeviceGetWriteProtect method implementing a standard MMC device interface (Or nil if the default method is suitable)
DeviceSendCommand:TMMCDeviceSendCommand; A Device specific DeviceSendCommand method implementing a standard MMC device interface (Or nil if the default method is suitable)
DeviceSetIOS:TMMCDeviceSetIOS; A Device specific DeviceSetIOS method implementing a standard MMC device interface (Or nil if the default method is suitable)
Statistics Properties
CommandCount:LongWord;  
CommandErrors:LongWord;  
Driver Properties
Lock:TMutexHandle; Device lock
Version:LongWord;  
Clock:LongWord;  
Timing:LongWord;  
BusWidth:LongWord;  
DriverType:LongWord;  
SignalVoltage:LongWord;  
Voltages:LongWord;  
Capabilities:LongWord;  
Capabilities2:LongWord;  
EraseSize:LongWord; Erase Size in Sectors
EraseShift:LongWord;  
EraseArgument:LongWord;  
PreferredEraseSize:LongWord; Preferred Erase Size in Sectors
EnhancedStrobe:LongBool;  
Register Properties
See: Table 3-2: SD Memory Card Registers of SD Physical Layer Simplified Specification Version 4.10
InterfaceCondition:LongWord; Interface Condition Result
OperationCondition:LongWord; Operation Condition Register (OCR) See: Section 5.1 of SD Physical Layer Simplified Specification Version 4.10
RelativeCardAddress:LongWord; Relative Card Address (RCA) (Word) See: Section 5.4 of SD Physical Layer Simplified Specification Version 4.10
CardSpecific:array[0..3] of LongWord; Card Specific Data (CSD) See: Section 5.3 of SD Physical Layer Simplified Specification Version 4.10
CardIdentification:array[0..3] of LongWord; Card Identification Data (CID) See: Section 5.2 of SD Physical Layer Simplified Specification Version 4.10
ExtendedCardSpecific:PByte; Extended Card Specific Data (EXTCSD) See: Section 7.4 of Embedded Multi-Media Card (eMMC) Electrical Standard 5.1
CardStatus:LongWord; Card Status Register (CSR) See: Section 4.10.1 of SD Physical Layer Simplified Specification Version 4.10
DriverStage:LongWord; Driver Stage Register (DSR) (Word) See: Section 5.5 of SD Physical Layer Simplified Specification Version 4.10
SDStatus:array[0..15] of LongWord; SD Status Register (SSR) See: Section 4.10.2 of SD Physical Layer Simplified Specification Version 4.10
SDSwitch:array[0..15] of LongWord; SD Switch Status See: Section 4.3.10 of SD Physical Layer Simplified Specification Version 4.10
SDConfiguration:array[0..3] of LongWord; SD Configuration Register (SCR) See: Section 5.6 of SD Physical Layer Simplified Specification Version 4.10
Configuration Properties
Note: 16 bytes instead of 8 to allow correct operation of MMCExtractBits, offset handled by SDDeviceSendSDConfiguration.
CardSpecificData:TMMCCardSpecificData;  
CardIdentificationData:TMMCCardIdentificationData;  
ExtendedCardSpecificData:TMMCExtendedCardSpecificData;  
SDStatusData:TSDStatusData;  
SDSwitchData:TSDSwitchData;  
SDConfigurationData:TSDConfigurationData;  
SDIO Properties
CCCR:PSDIOCCCR; SDIO Common Card Register Information
CIS:PSDIOCIS; SDIO Common CIS (Card Information Structure) Information
Tuples:PSDIOTuple; SDIO CIS (Card Information Structure) tuples on this MMC
SDIOCount:LongWord; SDIO function count for this MMC (Where Applicable)
SDIOFunctions:array[0..SDIO_MAX_FUNCTIONS - 1] of PSDIOFunction; SDIO functions on this MMC (Where Applicable)
SDIOInterruptFunction:PSDIOFunction; SDIO function for all interrupts (If only one interrupt is registered)
Storage Properties
Storage:PStorageDevice; The Storage entry for this MMC (Where Applicable)
Internal Properties
Prev:PMMCDevice; Previous entry in MMC table
Next:PMMCDevice; Next entry in MMC table

MMC enumeration callback

TMMCEnumerate = function(MMC:PMMCDevice; Data:Pointer):LongWord;

MMC notification callback

TMMCNotification = function(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;

MMC device initialize

TMMCDeviceInitialize = function(MMC:PMMCDevice):LongWord;

MMC device deinitialize

TMMCDeviceDeinitialize = function(MMC:PMMCDevice):LongWord;

MMC device get card detect

TMMCDeviceGetCardDetect = function(MMC:PMMCDevice):LongWord;

MMC device get write protect

TMMCDeviceGetWriteProtect = function(MMC:PMMCDevice):LongWord;

MMC device send command

TMMCDeviceSendCommand = function(MMC:PMMCDevice; Command:PMMCCommand):LongWord;

MMC device set IOS

TMMCDeviceSetIOS = function(MMC:PMMCDevice):LongWord;

SDIO CCCR

PSDIOCCCR = ^TSDIOCCCR;

TSDIOCCCR = record

SDIO Properties
CCCRVersion:Byte; CCCR (Card Common Control Register) Version (00h)
SDIOVersion:Byte; SDIO Specification Version (00h)
SDVersion:Byte; SD Specification Version (04h)
CCCRCapabilities:Byte; CCCR Capabilities Register (08h)
CCCRPowerControl:Byte; CCCR Power Control Register (12h)
CCCRBusSpeed:Byte; CCCR Bus Speed Select Register (13h)
CCCRUHSSupport:Byte; CCCR UHS-I Support Register (14h)
CCCRDriverStrength:Byte; CCCR Driver Strength Register (15h)
Driver Properties
MultiBlock:Boolean; Card Capability Multi Block Transfer (SMB)
LowSpeed:Boolean; Card Capability Low Speed Card (LSC)
WideBus:Boolean; Card Capability 4-bit Mode for Low Speed Card (4BLS)
HighPower:Boolean; Support Master Power Control (SMPC)
HighSpeed:Boolean; Support High Speed (SHS)

SDIO CIS

PSDIOCIS = ^TSDIOCIS;

TSDIOCIS = record

Vendor:Word;  
Device:Word;  
BlockSize:Word;  
MaxClock:LongWord;  

SDIO tuple

PSDIOTuple = ^TSDIOTuple;

TSDIOTuple = record

Next:PSDIOTuple;  
Code:Byte;  
Size:Byte;  
Data:array[0..0] of Byte;  

SDIO function interrupt handler

TSDIOInterruptHandler = procedure(Func:PSDIOFunction);

SDIO function enumeration callback

TSDIOFunctionEnumerate = function(Func:PSDIOFunction; Data:Pointer):LongWord;

SDIO function

FSDIOFunction = ^TSDIOFunction;

TSDIOFunction = record

Function Properties
SDIOState:LongWord; SDIO function state (eg SDIO_STATE_ATTACHED)
SDIOStatus:LongWord; SDIO function status (eg SDIO_STATUS_BOUND)
MMC:PMMCDevice; The MMC device for this function
Number:LongWord; The function number
ClassId:Byte; Standard class Id
VendorId:Word; Vendor Id
DeviceId:Word; Device Id
BlockSize:LongWord; Current block size
MaxBlockSize:LongWord; Maximum block size
EnableTimeout:LongWord; Function enable timeout
Handler:TSDIOInterruptHandler; Interrupt handler for this function
DMABuffer:Pointer; DMA compatible buffer for small reads and writes
Tuples:PSDIOTuple; CIS (Card Information Structure) tuples for this function
Driver:PSDIODriver; Driver this function is bound to, if any
DriverData:Pointer; Private data for the driver of this SDIO device

SDIO driver enumeration callback

TSDIODriverEnumerate = function(Driver:PSDIODriver;Data:Pointer):LongWord;

SDIO driver bind callback

TSDIODriverBind = function(MMC:PMMCDevice; Func:PSDIOFunction):LongWord;

SDIO driver unbind callback

TSDIODriverUnbind = function(MMC:PMMCDevice; Func:PSDIOFunction):LongWord;

SDIO driver

PSDIODriver = ^TSDIODriver;

TSDIODriver = record

Driver Properties
Driver:TDriver; The Driver entry for this SDIO Driver
SDIO Properties
DriverBind:TSDIODriverBind; A Driver specific DriverBind method implementing the standard SDIO driver interface
DriverUnbind:TSDIODriverUnbind; A Driver specific DriverUnbind method implementing the standard SDIO driver interface
Interface Properties
Lock:TMutexHandle; Driver lock
Internal Properties
Prev:PSDIODriver; Previous entry in Driver table
Next:PSDIODriver; Next entry in Driver table

SDHCI ADMA2 32-bit descriptor

PSDHCIADMA2Descriptor32 = ^TSDHCIADMA2Descriptor32;

TSDHCIADMA2Descriptor32 = packed record

See: ADMA2 Descriptor Format - SD Host Controller Simplified Specification Version 4.20
Command:Word;  
Len:Word;  
Address:LongWord;  

SDHCI ADMA2 64-bit descriptor

PSDHCIADMA2Descriptor64 = ^TSDHCIADMA2Descriptor64;

TSDHCIADMA2Descriptor64 = packed record

See: ADMA2 Descriptor Format - SD Host Controller Simplified Specification Version 4.20
Note: 12-byte descriptor can't always be 8-byte aligned
Command:Word;  
Len:Word;  
AddressLow:LongWord;  
AddressHigh:LongWord;  

SDHCI ADMA2 64-bit V4 descriptor

PSDHCIADMA2Descriptor64v4 = ^TSDHCIADMA2Descriptor64v4;

TSDHCIADMA2Descriptor64v4 = packed record

Command:Word;  
Len:Word;  
AddressLow:LongWord;  
AddressHigh:LongWord;  
Reserved:LongWord;  

SDHCI host types

PSDHCIHost = ^TSDHCIHost;

TSDHCIHost = record

Device Properties
Device:TDevice; The Device entry for this SDHCI
SDHCI Properties
SDHCIId:LongWord; Unique Id of this SDHCI in the SDHCI table
SDHCIState:LongWord; SDHCI state (eg SDHCI_STATE_ENABLED)
HostStart:TSDHCIHostStart; A Host specific HostStart method implementing a standard SDHCI host interface
HostStop:TSDHCIHostStop; A Host specific HostStop method implementing a standard SDHCI host interface
HostLock:TSDHCIHostLock; A Host specific HostLock method implementing a standard SDHCI host interface
HostUnlock:TSDHCIHostUnlock; A Host specific HostUnlock method implementing a standard SDHCI host interface
HostSignal:TSDHCIHostSignal; A Host specific HostSignal method implementing a standard SDHCI host interface
HostReadByte:TSDHCIHostReadByte; A Host specific HostReadByte method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostReadWord:TSDHCIHostReadWord; A Host specific HostReadWord method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostReadLong:TSDHCIHostReadLong; A Host specific HostReadLong method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostWriteByte:TSDHCIHostWriteByte; A Host specific HostWriteByte method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostWriteWord:TSDHCIHostWriteWord; A Host specific HostWriteWord method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostWriteLong:TSDHCIHostWriteLong; A Host specific HostWriteLong method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostReset:TSDHCIHostReset; A Host specific HostReset method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostHardwareReset:TSDHCIHostHardwareReset; A Host specific HostHardwareReset method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostSetPower:TSDHCIHostSetPower; A Host specific HostSetPower method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostSetClock:TSDHCIHostSetClock; A Host specific HostSetClock method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostSetTiming:TSDHCIHostSetTiming; A Host specific HostSetTiming method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostSetBusWidth:TSDHCIHostSetBusWidth; A Host specific HostSetBusWidth method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostSetClockDivider:TSDHCIHostSetClockDivider;  
HostSetControlRegister:TSDHCIHostSetControlRegister;  
HostPrepareDMA:TSDHCIHostPrepareDMA; A Host specific HostPrepareDMA method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostStartDMA:TSDHCIHostStartDMA; A Host specific HostStartDMA method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostStopDMA:TSDHCIHostStopDMA; A Host specific HostStopDMA method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostSetupCardIRQ:TSDHCIHostSetupCardIRQ; A Host specific HostSetupCardIRQ method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
HostCompleteCardIRQ:TSDHCIHostCompleteCardIRQ; A Host specific HostCompleteCardIRQ method implementing a standard SDHCI host interface (Or nil if the default method is suitable)
DeviceInitialize:TMMCDeviceInitialize; A Device specific DeviceInitialize method implementing a standard MMC device interface (Or nil if the default method is suitable)
DeviceDeinitialize:TMMCDeviceDeinitialize; A Device specific DeviceDeinitialize method implementing a standard MMC device interface (Or nil if the default method is suitable)
DeviceGetCardDetect:TMMCDeviceGetCardDetect; A Device specific DeviceGetCardDetect method implementing a standard MMC device interface (Or nil if the default method is suitable)
DeviceGetWriteProtect:TMMCDeviceGetWriteProtect; A Device specific DeviceGetWriteProtect method implementing a standard MMC device interface (Or nil if the default method is suitable)
DeviceSendCommand:TMMCDeviceSendCommand; A Device specific DeviceSendCommand method implementing a standard MMC device interface (Or nil if the default method is suitable)
DeviceSetIOS:TMMCDeviceSetIOS; A Device specific DeviceSetIOS method implementing a standard MMC device interface (Or nil if the default method is suitable)
Driver Properties
Spin:TSpinHandle; Host lock (Spin) for use by interrupt handlers
Lock:TMutexHandle; Host lock (Mutex) for use by other functions
Address:Pointer; Host register base address
Version:LongWord; Host version information
Quirks:LongWord; Host quirks/bugs flags
Quirks2:LongWord; Host additional quirks/bugs flags
Clock:LongWord; Host current clock
Power:LongWord; Host current power
Timing:LongWord; Host current timing
BusWidth:LongWord; Host current bus width
Interrupts:LongWord; Host interrupts to be handled
Voltages:LongWord; Host configured voltage flags
Capabilities:LongWord; Host configured capabilities flags
Capabilities2:LongWord; Host configured additional capabilities flags
TimeoutFrequency:LongWord; Host configured timeout clock frequency (KHz)
MinimumFrequency:LongWord; Host configured minimum frequency (Hz)
MaximumFrequency:LongWord; Host configured maximum frequency (Hz)
MaximumBlockSize:LongWord; Host configured maximum block size
MaximumBlockCount:LongWord; Host configured maximum block count
MaximumRequestSize:LongWord; Host configured maximum request size
MaximumBusyTimeout:LongWord; Host configured maximum busy timeout (Milliseconds)
MinimumDMASize:LongWord; Minimum size for DMA read or write (Use PIO if less)
MaximumPIOBlocks:LongWord; Maximum blocks for PIO read or write (Use DMA if greater)
PresetEnabled:LongBool; Version 3.00 Preset Values Enabled (If applicable)
CardIRQEnabled:LongBool; SDIO card interrupt is enabled
CardIRQWorker:TWorkerHandle; SDIO card interrupt current worker
CardIRQDevice:PMMCDevice; SDIO card interrupt device
CardIRQCount:LongWord; SDIO card interrupt function registered count
Command:PMMCCommand; Currently processing command
Wait:TSemaphoreHandle; Command completed semaphore
UseDMA:LongBool; Use DMA for the current data transfer
DMAData:TDMAData; External DMA data descriptor for current request (If applicable)
DMAWait:TSemaphoreHandle; External DMA completed semaphore
DMASlave:LongWord; External DMA slave (DREQ) Id for this device (If applicable)
DMABuffer:Pointer; DMA bounce buffer for the current request (If applicable)
DMADirection:LongWord; DMA data direction for current request (If applicable)
SDMABoundary:LongWord; SDMA buffer boundary argument
ADMATable:PSDHCIADMA2Descriptor64v4; ADMA descriptors for current request (If applicable)
ADMABuffer:Pointer; ADMA alignment buffers for the current request (If applicable)
ADMATableSize:LongWord; ADMA descriptor table size in bytes (If applicable)
ADMATableCount:LongWord; ADMA descriptor table entry count (If applicable)
ADMABufferSize:LongWord; ADMA alignment buffers size in bytes (If applicable)
ADMADescriptorSize:LongWord; ADMA descriptor size in bytes (If applicable)
Configuration Properties
PresetVoltages:LongWord; Host predefined voltage flags
PresetCapabilities:LongWord; Host predefined capabilities flags
PresetCapabilities2:LongWord; Host predefined additional capabilities flags
ClockMinimum:LongWord; Host predefined minimum clock frequency
ClockMaximum:LongWord; Host predefined maximum clock frequency
DriverStageRegister:LongWord; Host predefined driver stage register (DSR)
EnableV4Mode:LongBool; Enable SDHCI version 4 protocol support
Statistics Properties
RequestCount:LongWord; Number of requests that have been submitted to this host
RequestErrors:LongWord; Number of requests that have failed on this host
DataRequestCount:LongWord; Number of data requests that have been submitted to this host
CommandRequestCount:LongWord; Number of command requests that have been submitted to this host
PIODataTransferCount:LongWord; Number of data requests that have been submitted for PIO transfer on this host
DMADataTransferCount:LongWord; Number of data requests that have been submitted for DMA transfer on this host
InterruptCount:LongWord; Number of interrupt requests received by the host
DataInterruptCount:LongWord; Number of data interrupt requests received by the host
CommandInterruptCount:LongWord; Number of command interrupt requests received by the host
Internal Properties
Prev:PSDHCIHost; Previous entry in SDHCI table
Next:PSDHCIHost; Next entry in SDHCI table

SDHCI enumeration callback

TSDHCIEnumerate = function(SDHCI:PSDHCIHost; Data:Pointer):LongWord;

SDHCI notification callback

TSDHCINotification = function(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;

SDHCI host start

TSDHCIHostStart = function(SDHCI:PSDHCIHost):LongWord;

SDHCI host stop

TSDHCIHostStop = function(SDHCI:PSDHCIHost):LongWord;

SDHCI host lock

TSDHCIHostLock = function(SDHCI:PSDHCIHost):LongWord;

SDHCI host unlock

TSDHCIHostUnlock = function(SDHCI:PSDHCIHost):LongWord;

SDHCI host signal

TSDHCIHostSignal = function(SDHCI:PSDHCIHost; Semaphore:TSemaphoreHandle):LongWord;

SDHCI host read byte

TSDHCIHostReadByte = function(SDHCI:PSDHCIHost; Reg:LongWord):Byte;

SDHCI host read word

TSDHCIHostReadWord = function(SDHCI:PSDHCIHost; Reg:LongWord):Word;

SDHCI host read long

TSDHCIHostReadLong = function(SDHCI:PSDHCIHost; Reg:LongWord):LongWord;

SDHCI host write byte

TSDHCIHostWriteByte = procedure(SDHCI:PSDHCIHost; Reg:LongWord; Value:Byte);

SDHCI host write word

TSDHCIHostWriteWord = procedure(SDHCI:PSDHCIHost; Reg:LongWord; Value:Word);

SDHCI host write long

TSDHCIHostWriteLong = procedure(SDHCI:PSDHCIHost; Reg:LongWord; Value:LongWord);

SDHCI host reset

TSDHCIHostReset = function(SDHCI:PSDHCIHost; Mask:Byte):LongWord;

SDHCI host hardware reset

TSDHCIHostHardwareReset = function(SDHCI:PSDHCIHost):LongWord;

SDHCI host set power

TSDHCIHostSetPower = function(SDHCI:PSDHCIHost; Power:Word):LongWord;

SDHCI host set clock

TSDHCIHostSetClock = function(SDHCI:PSDHCIHost; Clock:LongWord):LongWord;

SDHCI host set timing

TSDHCIHostSetTiming = function(SDHCI:PSDHCIHost; Timing:LongWord):LongWord;

SDHCI host bus width

TSDHCIHostSetBusWidth = function(SDHCI:PSDHCIHost; BusWidth:LongWord):LongWord;

SDHCI host set clock divider

TSDHCIHostSetClockDivider = function(SDHCI:PSDHCIHost; Index:Integer; Divider:LongWord):LongWord;

SDHCI host set control register

TSDHCIHostSetControlRegister = function(SDHCI:PSDHCIHost):LongWord;

SDHCI host prepare DMA

TSDHCIHostPrepareDMA = function(SDHCI:PSDHCIHost; Command:PMMCCommand):LongWord;

SDHCI host start DMA

TSDHCIHostStartDMA = function(SDHCI:PSDHCIHost; Command:PMMCCommand):LongWord;

SDHCI host stop DMA

TSDHCIHostStopDMA = function(SDHCI:PSDHCIHost; Command:PMMCCommand):LongWord;

SDHCI host setup card IRQ

TSDHCIHostSetupCardIRQ = function(SDHCI:PSDHCIHost; Enable:LongBool):LongWord;

SDHCI host complete card IRQ

TSDHCIHostCompleteCardIRQ = function(SDHCI:PSDHCIHost):LongWord;


Function declarations



Initialization functions

procedure MMCInit;
Description: Performs basic initialization of the MMC/SD core, after this devices, hosts and drivers can be registered however nothing will work until MMCStart is called
Note None documented


function MMCStart:LongWord;
Description: To be documented
Note None documented


function MMCStop:LongWord;
Description: To be documented
Note None documented


procedure MMCAsyncStart(SDHCI:PSDHCIHost);
Description: To be documented
Note None documented


MMC functions

function MMCDeviceReadBlocks(MMC:PMMCDevice; const Start,Count:Int64; Buffer:Pointer):LongWord;
Description: To be documented
Note None documented


function MMCDeviceWriteBlocks(MMC:PMMCDevice; const Start,Count:Int64; Buffer:Pointer):LongWord;
Description: To be documented
Note None documented


function MMCDeviceEraseBlocks(MMC:PMMCDevice; const Start,Count:Int64):LongWord;
Description: To be documented
Note None documented


function MMCDeviceGoIdle(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSetClock(MMC:PMMCDevice; Clock:LongWord):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSetTiming(MMC:PMMCDevice; Timing:LongWord):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSetBusWidth(MMC:PMMCDevice; Width:LongWord):LongWord;
Description: To be documented
Reference Section 3.4 of SD Host Controller Simplified Specification V3.0 partA2_300.pdf


function MMCDeviceSetBlockLength(MMC:PMMCDevice; Length:LongWord):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSetBlockCount(MMC:PMMCDevice; Count:LongWord; Relative:Boolean):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSetDriverStage(MMC:PMMCDevice; DriverStage:LongWord):LongWord;
Description: To be documented
Note None documented


function MMCDeviceStopTransmission(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSelectCard(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceDeselectCard(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSwitch(MMC:PMMCDevice; Setting,Index,Value:Byte; Timeout:LongWord):LongWord;
Description: Modifies an Extended CSD register for the specificed MMC device
MMC The MMC Device to modify
Setting The Extended CSD command set (eg EXT_CSD_CMD_SET_NORMAL)
Index The index of the Extended CSD register to be set
Value The value to be set in the Extended CSD register
Timeout Command timeout in milliseconds


function MMCDeviceSwitchEx(MMC:PMMCDevice; Setting,Index,Value:Byte; Timeout,Timing:LongWord; SendStatus,RetryCRCError:Boolean):LongWord;
Description: Modifies an Extended CSD register for the specificed MMC device
MMC The MMC Device to modify
Setting The Extended CSD command set (eg EXT_CSD_CMD_SET_NORMAL)
Index The index of the Extended CSD register to be set
Value The value to be set in the Extended CSD register
Timeout Command timeout in milliseconds
Timing New timing to enable after change (eg MMC_TIMING_MMC_HS)
SendStatus Use the MMC_CMD_SEND_STATUS command to poll for busy
RetryCRCError Retry if CRC error occurs when polling for busy


function MMCDevicePollForBusy(MMC:PMMCDevice; Timeout,Command:LongWord):LongWord;
Description: Poll the specified MMC device for command completion using busy status
Note None documented


function MMCDevicePollForBusyEx(MMC:PMMCDevice; Timeout,Command:LongWord; SendStatus,RetryCRCError:Boolean):LongWord;
Description: Poll the specified MMC device for command completion using busy status
Note None documented


function MMCDeviceSendCardStatus(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSendOperationCondition(MMC:PMMCDevice; Probe:Boolean):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSendCardSpecific(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceDecodeCardSpecific(MMC:PMMCDevice):LongWord;
Description: Given a 128-bit response, decode to our card CSD structure
Note None documented


function MMCDeviceSendCardIdentification(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSendAllCardIdentification(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceDecodeCardIdentification(MMC:PMMCDevice):LongWord;
Description: Given a 128-bit response, decode to our card CID structure
Note None documented


function MMCDeviceGetExtendedCardSpecific(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSendExtendedCardSpecific(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceDecodeExtendedCardSpecific(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSetRelativeAddress(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSPISetCRC(MMC:PMMCDevice; Enable:Boolean):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSPIReadOperationCondition(MMC:PMMCDevice; HighCapacity:Boolean):LongWord;
Description: To be documented
Note None documented


function MMCDeviceInsert(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceRemove(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceInitialize(MMC:PMMCDevice):LongWord;
Description: To be documented
Reference Section 3.6 of SD Host Controller Simplified Specification V3.0 partA2_300.pdf


function MMCDeviceDeinitialize(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceGetCardDetect(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceGetWriteProtect(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSendCommand(MMC:PMMCDevice; Command:PMMCCommand):LongWord;
Description: To be documented
Note None documented


function MMCDeviceSetIOS(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function MMCDeviceCreate:PMMCDevice;
Description: Create a new MMC entry
Return Pointer to new MMC entry or nil if MMC could not be created


function MMCDeviceCreateEx(Size:LongWord):PMMCDevice;
Description: Create a new MMC entry
Size Size in bytes to allocate for new MMC (Including the MMC entry)
Return Pointer to new MMC entry or nil if MMC could not be created


function MMCDeviceDestroy(MMC:PMMCDevice):LongWord;
Description: Destroy an existing MMC entry
Note None documented


function MMCDeviceRegister(MMC:PMMCDevice):LongWord;
Description: Register a new MMC in the MMC table
Note None documented


function MMCDeviceDeregister(MMC:PMMCDevice):LongWord;
Description: Deregister a MMC from the MMC table
Note None documented


function MMCDeviceFind(MMCId:LongWord):PMMCDevice;
Description: To be documented
Note None documented


function MMCDeviceFindByDevice(Device:PDevice):PMMCDevice;
Description: Find an MMC/SD device by the matching DeviceData property
Device The device entry to match with the DeviceData value
Return The MMC/SD device matched or nil if none found


function MMCDeviceFindByName(const Name:String):PMMCDevice; inline;
Description: To be documented
Note None documented


function MMCDeviceFindByDescription(const Description:String):PMMCDevice; inline;
Description: To be documented
Note None documented


function MMCDeviceEnumerate(Callback:TMMCEnumerate; Data:Pointer):LongWord;
Description: To be documented
Note None documented


function MMCDeviceNotification(MMC:PMMCDevice; Callback:TMMCNotification; Data:Pointer; Notification,Flags:LongWord):LongWord;
Description: To be documented
Note None documented


SD functions

function SDDeviceSwitch(MMC:PMMCDevice; Mode,Group:Integer; Value:Byte; Buffer:Pointer):LongWord;
Description: To be documented
Buffer Buffer must point to a 64 byte buffer for Switch Status information
Note See 4.3.10 of SD Physical Layer Simplified Specification V4.10


function SDDeviceSwitchHighspeed(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDDeviceSetBusWidth(MMC:PMMCDevice; Width:LongWord):LongWord;
Description: To be documented
Note See Table 4-30 in Section 4.7.4 of SD Physical Layer Simplified Specification V4.10


function SDDeviceSendInterfaceCondition(MMC:PMMCDevice):LongWord;
Description: To be documented
Note See 4.3.13 of SD Physical Layer Simplified Specification V4.10.

CMD8 (SEND_IF_COND) must be invoked to support SD 2.0 cards. The card must be in Idle State before issuing this command. This command will fail harmlessly for SD 1.0 cards.


function SDDeviceSendOperationCondition(MMC:PMMCDevice; Probe:Boolean):LongWord;
Description: To be documented
Note See 4.2.3.1 of SD Physical Layer Simplified Specification V4.10


function SDDeviceGetCardSpecific(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDDeviceDecodeCardSpecific(MMC:PMMCDevice):LongWord;
Description: Given a 128-bit response, decode to our card CSD structure
Note None documented


function SDDeviceGetCardIdentification(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDDeviceDecodeCardIdentification(MMC:PMMCDevice):LongWord;
Description: Given a 128-bit response, decode to our card CID structure
Note None documented


function SDDeviceSendSDStatus(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDDeviceDecodeSDStatus(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDDeviceSendSDSwitch(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDDeviceDecodeSDSwitch(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDDeviceSendSDConfiguration(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDDeviceDecodeSDConfiguration(MMC:PMMCDevice):LongWord;
Description: Given a 64-bit response, decode to our card SCR structure
Note None documented


function SDDeviceSendRelativeAddress(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDDeviceSendApplicationCommand(MMC:PMMCDevice; Command:PMMCCommand):LongWord;
Description: To be documented
Note None documented


SDIO functions

function SDIODeviceReset(MMC:PMMCDevice):LongWord;
Description: To be documented
Note See SDIO Simplified Specification V2.0, 4.4 Reset for SDIO


function SDIODeviceEnableWideBus(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDIODeviceDisableWideBus(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDIODeviceEnableHighspeed(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDIODeviceSwitchHighspeed(MMC:PMMCDevice; Enable:Boolean):LongWord;
Description: To be documented
Note None documented


function SDIODeviceSendOperationCondition(MMC:PMMCDevice; Probe:Boolean):LongWord;
Description: To be documented
Note None documented


function SDIODeviceReadWriteDirect(MMC:PMMCDevice; Write:Boolean; Operation,Address:LongWord; Input:Byte; Output:PByte):LongWord;
Description: To be documented
Note None documented


function SDIODeviceReadWriteExtended(MMC:PMMCDevice; Write:Boolean; Operation,Address:LongWord; Increment:Boolean; Buffer:Pointer; BlockCount,BlockSize:LongWord):LongWord;
Description: To be documented
Note None documented


function SDIODeviceReadByte(MMC:PMMCDevice; Address:LongWord; Output:PByte):LongWord;
Description: Wrapper for reading a single byte from Function 0
Note None documented


function SDIODeviceWriteByte(MMC:PMMCDevice; Address:LongWord; Input:Byte):LongWord;
Description: Wrapper for writing a single byte to Function 0
Note None documented


function SDIODeviceReadCCCR(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDIODeviceReadFBR(Func:PSDIOFunction):LongWord;
Description: To be documented
Note None documented


function SDIODeviceReadCIS(MMC:PMMCDevice; Func:PSDIOFunction):LongWord;
Description: To be documented
Note None documented


function SDIODeviceReadCommonCIS(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDIODeviceReadFunctionCIS(Func:PSDIOFunction):LongWord;
Description: To be documented
Note None documented


function SDIODeviceProcessInterrupts(MMC:PMMCDevice):LongWord;
Description: To be documented
Note None documented


function SDIODeviceRegisterInterrupt(MMC:PMMCDevice; Func:PSDIOFunction; Handler:TSDIOInterruptHandler):LongWord;
Description: To be documented
Note None documented


function SDIODeviceDeregisterInterrupt(MMC:PMMCDevice; Func:PSDIOFunction):LongWord;
Description: To be documented
Note None documented


function SDIODeviceBindFunctions(MMC:PMMCDevice):LongWord;
Description: Attempt to bind SDIO functions on an MMC device to one of the registered drivers
MMC The MMC device to attempt to bind a driver to
Return MMC_STATUS_SUCCESS if completed or another error code on failure


function SDIODeviceUnbindFunctions(MMC:PMMCDevice; Driver:PSDIODriver):LongWord;
Description: Unbind SDIO functions on an MMC device from a driver
MMC The MMC device to unbind a driver from
Driver The driver to unbind the MMC device from (nil to unbind from current driver)
Return MMC_STATUS_SUCCESS if completed or another error code on failure


function SDIOFunctionAllocate(MMC:PMMCDevice; Number:LongWord):PSDIOFunction;
Description: To be documented
Note None documented


function SDIOFunctionRelease(Func:PSDIOFunction):LongWord;
Description: To be documented
Note None documented


function SDIOFunctionFind(MMC:PMMCDevice; Number:LongWord):PSDIOFunction;
Description: To be documented
Note None documented


function SDIOFunctionFindById(MMC:PMMCDevice; VendorId,DeviceId:Word):PSDIOFunction;
Description: To be documented
Note None documented


function SDIOFunctionEnumerate(MMC:PMMCDevice; Callback:TSDIOFunctionEnumerate; Data:Pointer):LongWord;
Description: To be documented
Note None documented


function SDIOFunctionBind(Func:PSDIOFunction; Driver:PSDIODriver):LongWord;
Description: To be documented
Note None documented


function SDIOFunctionUnbind(Func:PSDIOFunction; Driver:PSDIODriver):LongWord;
Description: To be documented
Note None documented


function SDIOFunctionEnable(Func:PSDIOFunction):LongWord;
Description: To be documented
Note None documented


function SDIOFunctionDisable(Func:PSDIOFunction):LongWord;
Description: To be documented
Note None documented


function SDIOFunctionSetBlockSize(Func:PSDIOFunction; BlockSize:LongWord):LongWord;
Description: To be documented
Note None documented


function SDIOFunctionReadWriteExtended(Func:PSDIOFunction; Write:Boolean; Address:LongWord; Increment:Boolean; Buffer:Pointer; Size:LongWord):LongWord;
Description: Perform an SDIO read or write to the specified function at the specified address
Note Handles splitting any size read or write into multiple IO_RW_EXTENDED requests, accounting for maximum block sizes.


function SDIOFunctionRead(Func:PSDIOFunction; Address:LongWord; Buffer:Pointer; Size:LongWord):LongWord;
Description: Wrapper for reading multiple bytes from an SDIO function
Note None documented


function SDIOFunctionWrite(Func:PSDIOFunction; Address:LongWord; Buffer:Pointer; Size:LongWord):LongWord;
Description: Wrapper for writing multiple bytes to an SDIO function
Note None documented


function SDIOFunctionReadByte(Func:PSDIOFunction; Address:LongWord; Output:PByte):LongWord;
Description: Wrapper for reading a single byte from an SDIO function
Note None documented


function SDIOFunctionWriteByte(Func:PSDIOFunction; Address:LongWord; Input:Byte):LongWord;
Description: Wrapper for writing a single byte to an SDIO function
Note None documented


function SDIOFunctionWriteReadByte(Func:PSDIOFunction; Address:LongWord; Input:Byte; Output:PByte):LongWord;
Description: Wrapper for performing a read after write (RAW) operation on an SDIO function
Note None documented


function SDIOFunctionReadWord(Func:PSDIOFunction; Address:LongWord; Output:PWord):LongWord;
Description: Wrapper for reading a single word from an SDIO function
Note None documented


function SDIOFunctionWriteWord(Func:PSDIOFunction; Address:LongWord; Input:Word):LongWord;
Description: Wrapper for writing a single word to an SDIO function
Note None documented


function SDIOFunctionReadLong(Func:PSDIOFunction; Address:LongWord; Output:PLongWord):LongWord;
Description: Wrapper for reading a single longword from an SDIO function
Note None documented


function SDIOFunctionWriteLong(Func:PSDIOFunction; Address:LongWord; Input:LongWord):LongWord;
Description: Wrapper for writing a single longword to an SDIO function
Note None documented


function SDIOFunctionRegisterInterrupt(Func:PSDIOFunction; Handler:TSDIOInterruptHandler):LongWord;
Description: To be documented
Note None documented


function SDIOFunctionDeregisterInterrupt(Func:PSDIOFunction):LongWord;
Description: To be documented
Note None documented


function SDIOHostDispatchInterrupt(SDHCI:PSDHCIHost; IRQ,FIQ:Boolean):LongWord;
Description: To be documented
Note None documented


SDHCI driver functions

function SDIODriverCreate:PSDIODriver;
Description: Create a new SDIO Driver entry
Return Pointer to new Driver entry or nil if driver could not be created


function SDIODriverCreateEx(Size:LongWord):PSDIODriver;
Description: Create a new SDIO Driver entry
Size Size in bytes to allocate for new driver (Including the driver entry)
Return Pointer to new Driver entry or nil if driver could not be created


function SDIODriverDestroy(Driver:PSDIODriver):LongWord;
Description: Destroy an existing SDIO Driver entry
Note None documented


function SDIODriverRegister(Driver:PSDIODriver):LongWord;
Description: Register a new Driver in the SDIO Driver table
Note None documented


function SDIODriverDeregister(Driver:PSDIODriver):LongWord;
Description: Deregister a Driver from the SDIO Driver table
Note None documented


function SDIODriverFind(DriverId:LongWord):PSDIODriver;
Description: Find a driver by Id in the SDIO Driver table
Note None documented


function SDIODriverFindByName(const Name:String):PSDIODriver; inline;
Description: Find a driver by name in the Driver table
Note None documented


function SDIODriverEnumerate(Callback:TSDIODriverEnumerate;Data:Pointer):LongWord;
Description: To be documented
Note None documented


SDHCI functions

function SDHCIHostReset(SDHCI:PSDHCIHost; Mask:Byte):LongWord;
Description: Default software reset function for SDHCI host controllers
Reference Section 3.3 of SD Host Controller Simplified Specification V3.0 partA2_300.pdf
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostHardwareReset(SDHCI:PSDHCIHost):LongWord;
Description: Default hardware reset function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostSetPower(SDHCI:PSDHCIHost; Power:Word):LongWord;
Description: Default set power function for SDHCI host controllers
Reference Section 3.3 of SD Host Controller Simplified Specification V3.0 partA2_300.pdf
Power A shift value to indicate the first available value in the Voltages mask. Caller can use FirstBitSet(SDHCI.Voltages) - 1 to obtain the value of Power. If there are no values set then Power will be -1 ($FFFF) to indicate nothing or unknown.
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostSetClock(SDHCI:PSDHCIHost; Clock:LongWord):LongWord;
Description: Default set clock function for SDHCI host controllers
Reference Section 3.2 of SD Host Controller Simplified Specification V3.0 partA2_300.pdf
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostSetTiming(SDHCI:PSDHCIHost; Timing:LongWord):LongWord;
Description: Default set timing function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostSetBusWidth(SDHCI:PSDHCIHost; BusWidth:LongWord):LongWord;
Description: Default set bus width function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostPrepareDMA(SDHCI:PSDHCIHost; Command:PMMCCommand):LongWord;
Description: Default DMA transfer prepare function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostStartDMA(SDHCI:PSDHCIHost; Command:PMMCCommand):LongWord;
Description: Default DMA transfer start function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostStopDMA(SDHCI:PSDHCIHost; Command:PMMCCommand):LongWord;
Description: Default DMA transfer stop function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


procedure SDHCIHostCompleteDMA(Request:PDMARequest);
Description: Default DMA request completion callback for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostSetupCardIRQ(SDHCI:PSDHCIHost; Enable:LongBool):LongWord;
Description: Default Card IRQ setup function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostCompleteCardIRQ(SDHCI:PSDHCIHost):LongWord;
Description: Default Card IRQ completion function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostTransferPIO(SDHCI:PSDHCIHost):LongWord;
Description: Default PIO transfer function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostTransferDMA(SDHCI:PSDHCIHost):LongWord;
Description: Default DMA transfer function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostFinishCommand(SDHCI:PSDHCIHost):LongWord;
Description: Default finish command function for SDHCI host controllers
Note Called by Interrupt Command handler when an SDHCI_INT_RESPONSE is received
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostFinishData(SDHCI:PSDHCIHost):LongWord;
Description: Default finish data function for SDHCI host controllers
Note Called by Interrupt Data handler when data is received
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostCommandInterrupt(SDHCI:PSDHCIHost; InterruptMask:LongWord; var ReturnMask:LongWord):LongWord;
Description: Default command interrupt processing function for SDHCI host controllers
Note Called by SDHCI controller interrupt handler when a command interrupt is received
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostDataInterrupt(SDHCI:PSDHCIHost; InterruptMask:LongWord):LongWord;
Description: Default data interrupt processing function for SDHCI host controllers
Note Called by SDHCI controller interrupt handler when a data interrupt is received
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostStart(SDHCI:PSDHCIHost):LongWord;
Description: Default host start function for SDHCI host controllers
Note Called automatically to start each registered SDHCI controller when required
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostStop(SDHCI:PSDHCIHost):LongWord;
Description: Default host stop function for SDHCI host controllers
Note Called automatically to stop each registered SDHCI controller when required
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostLock(SDHCI:PSDHCIHost):LongWord; inline;
Description: Default host lock function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostUnlock(SDHCI:PSDHCIHost):LongWord; inline;
Description: Default host unlock function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostSignal(SDHCI:PSDHCIHost; Semaphore:TSemaphoreHandle):LongWord; inline;
Description: Default host semaphore signal function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostReadByte(SDHCI:PSDHCIHost; Reg:LongWord):Byte; inline;
Description: Default read byte function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostReadWord(SDHCI:PSDHCIHost; Reg:LongWord):Word; inline;
Description: Default read word function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostReadLong(SDHCI:PSDHCIHost; Reg:LongWord):LongWord; inline;
Description: Default read longword function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


procedure SDHCIHostWriteByte(SDHCI:PSDHCIHost; Reg:LongWord; Value:Byte); inline;
Description: Default write byte function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


procedure SDHCIHostWriteWord(SDHCI:PSDHCIHost; Reg:LongWord; Value:Word); inline;
Description: Default write word function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


procedure SDHCIHostWriteLong(SDHCI:PSDHCIHost; Reg:LongWord; Value:LongWord); inline;
Description: Default write longword function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostSetClockDivider(SDHCI:PSDHCIHost; Index:Integer; Divider:LongWord):LongWord;
Description: Default set clock divider function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostSetControlRegister(SDHCI:PSDHCIHost):LongWord;
Description: Default set control register function for SDHCI host controllers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostGetADMAAddress(SDHCI:PSDHCIHost):PtrUInt;
Description: Get the DMA address of the ADMA table for the current request
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


procedure SDHCIHostSetADMAAddress(SDHCI:PSDHCIHost; Address:PtrUInt);
Description: Set the address of the transfer data in the Advanced DMA (ADMA) registers
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostGetSDMAAddress(SDHCI:PSDHCIHost; Command:PMMCCommand):PtrUInt;
Description: Get the DMA address of the transfer data for the current request
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


procedure SDHCIHostSetSDMAAddress(SDHCI:PSDHCIHost; Address:PtrUInt);
Description: Set the address of the transfer data in the Simple DMA (SDMA) register
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


procedure SDHCIHostWriteADMADescriptor(SDHCI:PSDHCIHost; var Descriptor:Pointer; Command,Len:Word; Address:PtrUInt);
Description: Write the properties to an ADMA descriptor
Note Not intended to be called directly by applications, may be used by SDHCI drivers.


function SDHCIHostCreate:PSDHCIHost;
Description: Create a new SDHCI entry
Return Pointer to new SDHCI entry or nil if SDHCI could not be created


function SDHCIHostCreateEx(Size:LongWord):PSDHCIHost;
Description: Create a new SDHCI entry
Size Size in bytes to allocate for new SDHCI (Including the SDHCI entry)
Return Pointer to new SDHCI entry or nil if SDHCI could not be created


function SDHCIHostDestroy(SDHCI:PSDHCIHost):LongWord;
Description: Destroy an existing SDHCI entry
Note None documented


function SDHCIHostRegister(SDHCI:PSDHCIHost):LongWord;
Description: Register a new SDHCI in the SDHCI table
Note None documented


function SDHCIHostDeregister(SDHCI:PSDHCIHost):LongWord;
Description: Deregister a SDHCI from the SDHCI table
Note None documented


function SDHCIHostFind(SDHCIId:LongWord):PSDHCIHost;
Description: To be documented
Note None documented


function SDHCIHostEnumerate(Callback:TSDHCIEnumerate; Data:Pointer):LongWord;
Description: To be documented
Note None documented


function SDHCIHostNotification(SDHCI:PSDHCIHost; Callback:TSDHCINotification; Data:Pointer; Notification,Flags:LongWord):LongWord;
Description: To be documented
Note None documented


MMC helper functions

function MMCGetCount:LongWord;
Description: Get the current MMC count
Note None documented


function MMCDeviceCheck(MMC:PMMCDevice):PMMCDevice;
Description: Check if the supplied MMC is in the MMC table
Note None documented


function MMCIsSD(MMC:PMMCDevice):Boolean;
Description: To be documented
Note None documented


function MMCIsSDIO(MMC:PMMCDevice):Boolean;
Description: To be documented
Note None documented


function MMCGetSDHCI(MMC:PMMCDevice):PSDHCIHost; inline;
Description: To be documented
Note None documented


function MMCGetCIDValue(MMC:PMMCDevice; Version,Value:LongWord):LongWord;
Description: Extract a CID field value from the 128 bit Card Identification register
Note None documented


function MMCGetCSDValue(MMC:PMMCDevice; Value:LongWord):LongWord;
Description: Extract a CSD field value from the 128 bit Card Specific register
Note None documented


function MMCExtractBits(Buffer:Pointer; Start,Size:LongWord):LongWord;
Description: To be documented
Start Start is the starting bit to extract
Size Size is the number of bits to extract
Note Start is the LSB so to extract 8 bits from 127 to 120 then Start would be 120 and Size would be 8


function MMCExtractBitsEx(Buffer:Pointer; Length,Start,Size:LongWord):LongWord;
Description: To be documented
Length Length is the size of the buffer in LongWords
Start Start is the starting bit to extract
Size Size is the number of bits to extract
Note Start is the LSB so to extract 8 bits from 127 to 120 then Start would be 120 and Size would be 8. For a 128 bit buffer (16 bytes) Length would be 4. For a 512 bit buffer (64 bytes) Length would be 16.


function MMCIsMultiCommand(Command:Word):Boolean; inline;
Description: To be documented
Note None documented


function MMCIsNonRemovable(MMC:PMMCDevice):Boolean; inline;
Description: To be documented
Note None documented


function MMCHasExtendedCSD(MMC:PMMCDevice):Boolean; inline;
Description: To be documented
Note None documented


function MMCHasSetBlockCount(MMC:PMMCDevice):Boolean; inline;
Description: To be documented
Note None documented


function MMCHasAutoBlockCount(MMC:PMMCDevice):Boolean; inline;
Description: To be documented
Note None documented


function MMCHasAutoCommandStop(MMC:PMMCDevice):Boolean; inline;
Description: To be documented
Note None documented


function MMCStatusToString(Status:LongWord):String;
Description: Translates an MMC status code into a string describing it
Note None documented


function MMCVersionToString(Version:LongWord):String;
Description: Translates an MMC version into a string
Note None documented


function MMCTimingToString(Timing:LongWord):String;
Description: Translates an MMC timing into a string
Note None documented


function MMCBusWidthToString(BusWidth:LongWord):String;
Description: Translates an MMC bus width into a string
Note None documented


function MMCDriverTypeToString(DriverType:LongWord):String;
Description: Translates an MMC driver type into a string
Note None documented


function MMCSignalVoltageToString(SignalVoltage:LongWord):String;
Description: Translates an MMC signal voltage into a string
Note None documented


function MMCDeviceTypeToString(MMCType:LongWord):String;
Description: To be documented
Note None documented


function MMCDeviceStateToString(MMCState:LongWord):String;
Description: To be documented
Note None documented


function MMCDeviceStateToNotification(State:LongWord):LongWord;
Description: Convert a Device state value into the notification code for device notifications
Note None documented


procedure MMCLog(Level:LongWord; MMC:PMMCDevice; const AText:String);
Description: To be documented
Note None documented


procedure MMCLogInfo(MMC:PMMCDevice; const AText:String); inline;
Description: To be documented
Note None documented


procedure MMCLogWarn(MMC:PMMCDevice; const AText:String); inline;
Description: To be documented
Note None documented


procedure MMCLogError(MMC:PMMCDevice; const AText:String); inline;
Description: To be documented
Note None documented


procedure MMCLogDebug(MMC:PMMCDevice; const AText:String); inline;
Description: To be documented
Note None documented


SD helper functions

function SDGetMaxClock(MMC:PMMCDevice):LongWord;
Description: Determine the Maximum Clock (DTR) for the current card
Note None documented


function SDGetCIDValue(MMC:PMMCDevice; Value:LongWord):LongWord;
Description: Extract a CID field value from the 128 bit Card Identification register
Note None documented


function SDGetCSDValue(MMC:PMMCDevice; Version,Value:LongWord):LongWord;
Description: Extract a CSD field value from the 128 bit Card Specific register
Note None documented


function SDGetSCRValue(MMC:PMMCDevice; Value:LongWord):LongWord;
Description: Extract an SCR field value from the 64 bit SD Configuration register
Note None documented


function SDGetSSRValue(MMC:PMMCDevice; Value:LongWord):LongWord;
Description: Extract an SCR field value from the 512 bit SD Status register
Note None documented


function SDGetSwitchValue(MMC:PMMCDevice; Value:LongWord):LongWord;
Description: Extract a Switch field value from the 512 bit SD Switch status
Note None documented


function SDVersionToString(Version:LongWord):String;
Description: Translates an SD version into a string
Note None documented


function SDBusWidthToString(BusWidth:LongWord):String;
Description: Translates an SD bus width into a string
Note None documented


SDIO helper functions

function SDIODriverGetCount:LongWord;
Description: Get the current SDIO driver count
Note None documented


function SDIODriverCheck(Driver:PSDIODriver):PSDIODriver;
Description: Check if the supplied SDIO Driver is in the driver table
Note None documented


function SDIODeviceGetMaxClock(MMC:PMMCDevice):LongWord;
Description: Determine the Maximum Clock (DTR) for the current SDIO device
Note None documented


function SDIOFunctionGetMMC(Func:PSDIOFunction):PMMCDevice;
Description: To be documented
Note None documented


function SDIOFunctionGetSDHCI(Func:PSDIOFunction):PSDHCIHost;
Description: To be documented
Note None documented


function SDIOVersionToString(Version:LongWord):String;
Description: Translates an SDIO version into a string
Note None documented


function SDIOFunctionStateToString(SDIOState:LongWord):String;
Description: To be documented
Note None documented


function SDIOFunctionStatusToString(SDIOStatus:LongWord):String;
Description: To be documented
Note None documented


function SDIOFunctionStateToNotification(State:LongWord):LongWord;
Description: Convert a Device state value into the notification code for device notifications
Note None documented


SDIOFunctionStatusToNotification(Status:LongWord):LongWord;
Description: Convert a Device status value into the notification code for device notifications
Note None documented


SDHCI helper functions

function SDHCIGetCount:LongWord;
Description: Get the current SDHCI count
Note None documented


function SDHCIHostCheck(SDHCI:PSDHCIHost):PSDHCIHost;
Description: Check if the supplied SDHCI is in the SDHCI table
Note None documented


function SDHCIIsSPI(SDHCI:PSDHCIHost):Boolean;
Description: To be documented
Note None documented


function SDHCIHasDMA(SDHCI:PSDHCIHost):Boolean;
Description: To be documented
Note None documented


function SDHCIHasCMD23(SDHCI:PSDHCIHost):Boolean;
Description: To be documented
Note None documented


function SDHCIAutoCMD12(SDHCI:PSDHCIHost):Boolean;
Description: To be documented
Note None documented


function SDHCIAutoCMD23(SDHCI:PSDHCIHost):Boolean;
Description: To be documented
Note None documented


function SDHCIGetVersion(SDHCI:PSDHCIHost):Word;
Description: To be documented
Note None documented


function SDHCIGetCommand(Command:Word):Word;
Description: To be documented
Note None documented


function SDHCIMakeCommand(Command,Flags:Word):Word;
Description: To be documented
Note None documented


function SDHCIMakeBlockSize(DMA,BlockSize:Word):Word;
Description: To be documented
Note None documented


function SDHCIVersionToString(Version:LongWord):String;
Description: Translate an SDHCI version into a string
Note None documented


function SDHCIPowerToString(Power:LongWord):String;
Description: Translate an SDHCI power value into a string
Note None documented


function SDHCIDeviceTypeToString(SDHCIType:LongWord):String; inline;
Description: To be documented
Note None documented


function SDHCIHostTypeToString(SDHCIType:LongWord):String;
Description: To be documented
Note None documented


function SDHCIDeviceStateToString(SDHCIState:LongWord):String; inline;
Description: To be documented
Note None documented


function SDHCIHostStateToString(SDHCIState:LongWord):String;
Description: To be documented
Note None documented


function SDHCIHostStateToNotification(State:LongWord):LongWord;
Description: Convert a Host state value into the notification code for device notifications
Note None documented


MMC storage functions

function MMCStorageDeviceRead(Storage:PStorageDevice; const Start,Count:Int64; Buffer:Pointer):LongWord;
Description: To be documented
Note None documented


function MMCStorageDeviceWrite(Storage:PStorageDevice; const Start,Count:Int64; Buffer:Pointer):LongWord;
Description: To be documented
Note None documented


function MMCStorageDeviceErase(Storage:PStorageDevice; const Start,Count:Int64):LongWord;
Description: To be documented
Note None documented


function MMCStorageDeviceControl(Storage:PStorageDevice; Request:Integer; Argument1:PtrUInt; var Argument2:PtrUInt):LongWord;
Description: To be documented
Note None documented


SDIO macro replacement functions

function SDIO_FBR_BASE(Number:LongWord):LongWord; inline;
Description: To be documented
Note None documented


Return to Unit Reference