Unit Threads

Return to Unit Reference

To synchronize data access between threads each thread should call SpinLock() before accessing the data and SpinUnlock() when finished accessing the data. These calls do not affect the state of IRQs or FIQs and therefore do not impact interrupt latency. Lock/Unlock (Data accessed by threads and interrupt handlers)

To use a Spin lock to synchronise data access between threads and an interrupt handler each thread should call SpinLockIRQ() or SpinLockFIQ(), depending on whether the interrupt handler is servicing IRQ or FIQ requests, before accessing the data and SpinUnlockIRQ() or SpinUnlockFIQ() when finished accessing the data. These calls disable interrupts before acquiring the lock (with deadlock protection) and restore interrupts after releaseing the lock and therefore should only be used to protect very short sections of code accessing shared data to minimize the impact on interrupt latency.

Interrupt handlers should call SpinLock() before accessing the data and SpinUnlock() when finished accessing the data. In a Uniprocessor system it is technically not necessary for interrupt handlers to call lock/unlock as the use of IRQ/FIQ disable/enable will prevent interrupt handlers from executing while a thread has the lock. On a Multiprocessor system however interrupt handlers can execute on one processor while a thread is executing on another (which will not deadlock), to correctly synchronize data access both threads and interrupt handlers should call the appropriate lock/unlock before and after access to the data.

Lock Hierachy -

It is safe to acquire one lock using SpinLock() then another lock using SpinLock() and then release them in reverse order.

It is also safe to acquire one lock using SpinLock() then another lock using SpinLockIRQ(or FIQ)() and then release them in reverse order.

It is NOT safe to acquire one lock using SpinLockIRQ(or FIQ)() then another lock using SpinLock() and then release them in reverse order. This is because the first SpinLockIRQ(or FIQ)() can disable the scheduling and prevent thread preemption. If another thread is already holding the second lock then this sequence will deadlock (except on a multicore system where the other thread is running on a different CPU).

It is also safe to acquire one lock using SpinLockIRQ(or FIQ)() then another lock using SpinLockIRQ(or FIQ)() and then release them in reverse order. In this case you must ensure that any thread aquiring the second lock also calls SpinLockIRQ(or FIQ)() to thereby avoid the deadlock.

It is NOT safe to acquire one lock using SpinLockIRQ(or FIQ)() then another lock using SpinLockIRQ(or FIQ)() and then release them in the SAME order. If the situation absolutely requires this behavious then you must use SpinExchangeIRQ(or FIQ)() when holding both locks in order to reverse the order of the IRQ or FIQ renabling.

Mutex -

A mutually exclusive lock for controlling access to data. Threads yield while waiting to acquire the lock.

Non recursive (can only be acquired once by the same thread) (Recursive if MUTEX_FLAG_RECURSIVE specified)

Not suitable for use by Interrupt handlers.

Suitable for use on multiprocessor systems if the lock is allocated from shared memory (Determined during initialization).

Recommended for long held operations or holding during I/O operations.

Access is not serialized, the next thread to try obtaining the lock when it is released will succeed even if that thread was not the first waiting.

CriticalSection -

A mutually exlusive lock for serializing access to data. Threads are placed on a wait list while waiting to acquire the lock.

Recursive (can be acquired multiple times by the same thread)

Not suitable for use by Interrupt handlers.

Suitable for use on multiprocessor systems.

Recommended for long held operations or holding during I/O operations.

Access is serialized, the next thread to obtain the lock when it is released will be the thread that has been waiting longest.

Semaphore -

Suitable for use by Interrupt handlers for signaling only if created with SEMAPHORE_FLAG_IRQ or FIQ (Interrupt handlers must not call wait).

Suitable for use on multiprocessor systems.

Access is serialized, the next thread to acquire the semaphore when it is signaled will be the thread that has been waiting longest.

Synchronizer -

A reader/writer lock for serializing multiple concurrent reads and single writes to data. Threads are placed on a wait list while waiting to acquire the lock.

Recursive (reader lock can be acquired multiple times by the same thread or by other threads/writer lock can be acquired multiple times by the same thread) Not suitable for use by Interrupt handlers.

Suitable for use on multiprocessor systems.

Recommended for long held operations or holding during I/O operations.

Access is serialized, the next thread to obtain the lock when it is released will be the thread that has been waiting longest.

Constants

Lock flag LOCK_FLAG_*

`LOCK_FLAG_NONE = $00000000;`
`LOCK_FLAG_IRQ = $00000001;`
`LOCK_FLAG_FIQ = $00000002;`
`LOCK_FLAG_IRQFIQ = $00000004;`

Spin signature SPIN_SIGNATURE_*

`SPIN_SIGNATURE = $0FEC3B82;`

Spin state SPIN_STATE_*

`SPIN_STATE_UNLOCKED = 0;`
`SPIN_STATE_LOCKED = 1;`

Mutex signature MUTEX_SIGNATURE_*

`MUTEX_SIGNATURE = $1C5D7FA4;`

Mutex state MUTEX_STATE_*

`MUTEX_STATE_UNLOCKED = 0;`
`MUTEX_STATE_LOCKED = 1;`

Mutex flags MUTEX_FLAG_*

`MUTEX_FLAG_NONE = $00000000;`
`MUTEX_FLAG_RECURSIVE = $00000001;`

Critical section signature CRITICAL_SECTION_SIGNATURE_*

`CRITICAL_SECTION_SIGNATURE = $25F3AE01;`

Critical section state CRITICAL_SECTION_STATE_*

`CRITICAL_SECTION_STATE_UNLOCKED = 0;`
`CRITICAL_SECTION_STATE_LOCKED = 1;`

Semaphore signature SEMAPHORE_SIGNATURE_*

`SEMAPHORE_SIGNATURE = $390A1EB4;`

Semaphore flag SEMAPHORE_FLAG_*

`SEMAPHORE_FLAG_NONE = LOCK_FLAG_NONE;`
`SEMAPHORE_FLAG_IRQ = LOCK_FLAG_IRQ;`
`SEMAPHORE_FLAG_FIQ = LOCK_FLAG_FIQ;`
`SEMAPHORE_FLAG_IRQFIQ = LOCK_FLAG_IRQFIQ;`

Synchronizer signature SYNCHRONIZER_SIGNATURE_*

`SYNCHRONIZER_SIGNATURE = $C5D081FB;`

Synchronizer state SYNCHRONIZER_STATE_*

`SYNCHRONIZER_STATE_UNLOCKED = 0;`
`SYNCHRONIZER_STATE_READER_LOCKED = 1;`
`SYNCHRONIZER_STATE_WRITER_LOCKED = 2;`

Synchronizer flag SYNCHRONIZER_FLAG_*

`SYNCHRONIZER_FLAG_NONE = $00000000;`
`SYNCHRONIZER_FLAG_READ_PRIORITY = $00000001;`	Synchronizer prioritises readers over writers
`SYNCHRONIZER_FLAG_WRITE_PRIORITY = $00000002;`	Synchronizer prioritises writers over readers

List signature LIST_SIGNATURE_*

`LIST_SIGNATURE = $4A98BE2A;`

List type LIST_TYPE_*

`LIST_TYPE_NOT_SPECIFIED = 0;`	A generic thread list without a specific purpose
`LIST_TYPE_WAIT_SECTION = 1;`	A Critical Section Wait List
`LIST_TYPE_WAIT_SEMAPHORE = 2;`	A Semaphore Wait List
`LIST_TYPE_WAIT_SYNCHRONIZER = 3;`	A Synchronizer Wait List
`LIST_TYPE_WAIT_EVENT = 4;`	An Event Wait List
`LIST_TYPE_WAIT_THREAD = 5;`	A Thread Wait List
`LIST_TYPE_WAIT_MESSAGESLOT = 6;`	A Messageslot Wait List
`LIST_TYPE_WAIT_OTHER = 7;`	Another type of Wait List (Suitable for passing to ThreadWait/ThreadWaitEx/ThreadWaitMultiple/ThreadRelease)

List flag LIST_FLAG_*

`LIST_FLAG_NONE = LOCK_FLAG_NONE;`
`LIST_FLAG_IRQ = LOCK_FLAG_IRQ;`
`LIST_FLAG_FIQ = LOCK_FLAG_FIQ;`
`LIST_FLAG_IRQFIQ = LOCK_FLAG_IRQFIQ;`

Queue signature QUEUE_SIGNATURE_*

`QUEUE_SIGNATURE = $57A3BF9E;`

Queue type QUEUE_TYPE_*

`QUEUE_TYPE_NOT_SPECIFIED = 0;`	A generic thread queue without a specific purpose
`QUEUE_TYPE_SCHEDULE_SLEEP = 1;`	A Scheduler Sleep Queue
`QUEUE_TYPE_SCHEDULE_TIMEOUT = 2;`	A Scheduler Timeout Queue
`QUEUE_TYPE_SCHEDULE_TERMINATION = 3;`	A Scheduler Termination Queue (Threads are placed on termination queue when they exit or are terminated)
`QUEUE_TYPE_SCHEDULE_NONE = 4;`	A Scheduler No Priority Queue (Only used for IRQ/FIQ threads which are never selected for scheduling)
`QUEUE_TYPE_SCHEDULE_IDLE = 5;`	A Scheduler Idle Priority Queue
`QUEUE_TYPE_SCHEDULE_LOWEST = 6;`	A Scheduler Lowest Priority Queue
`QUEUE_TYPE_SCHEDULE_LOWER = 7;`	A Scheduler Lower Priority Queue
`QUEUE_TYPE_SCHEDULE_NORMAL = 8;`	A Scheduler Normal Priority Queue
`QUEUE_TYPE_SCHEDULE_HIGHER = 9;`	A Scheduler Higher Priority Queue
`QUEUE_TYPE_SCHEDULE_HIGHEST = 10;`	A Scheduler Highest Priority Queue
`QUEUE_TYPE_SCHEDULE_CRITICAL = 11;`	A Scheduler Critical Priority Queue

Queue flag QUEUE_FLAG_*

`NONE = LOCK_FLAG_NONE;`
`QUEUE_FLAG_IRQ = LOCK_FLAG_IRQ;`
`QUEUE_FLAG_FIQ = LOCK_FLAG_FIQ;`
`QUEUE_FLAG_IRQFIQ = LOCK_FLAG_IRQFIQ;`
`QUEUE_FLAG_DESCENDING = $00000008;`
`QUEUE_FLAG_DELTA = $00000010;`

Queue key QUEUE_KEY_*

`QUEUE_KEY_NONE = Integer($7FFFFFFF);`	Null key value returned from an empty Queue
`QUEUE_KEY_MAX = Integer($7FFFFFFE);`	Max key that can be ordered in a Queue
`QUEUE_KEY_MIN = Integer($80000000);`	Min key that can be ordered in a Queue

Thread signature THREAD_SIGNATURE_*

`THREAD_SIGNATURE = $6C2BA10F;`

Thread type THREAD_TYPE_*

`THREAD_TYPE_NORMAL = 0;`	A Normal thread (No special case handling)
`THREAD_TYPE_IDLE = 1;`	An Idle thread (Used to calculate ultilization and provide an always ready thread)
`THREAD_TYPE_IRQ = 2;`	An IRQ thread (Used by the IRQ handler during interrupt time)
`THREAD_TYPE_FIQ = 3;`	An FIQ thread (Used by the FIQ handler during interrupt time)
`THREAD_TYPE_SWI = 4;`	A Software Interrupt (SWI) thread (Used by the SWI handler during a system call)

Thread flag THREAD_FLAG_*

`THREAD_FLAG_NONE = $00000000;`
`THREAD_FLAG_PERSIST = $00000001;`	If set thread handle will persist until explicitly destroyed (Otherwise destroyed after termination quantum has elapsed)
`THREAD_FLAG_CANCELLED = $00000002;`	Indicates that thread has been cancelled, for support of external thread APIs (eg pThreads)(Not used internally by Ultibo)

`THREAD_FLAG_INTERNAL = THREAD_FLAG_NONE;`

Thread state THREAD_STATE_*

`THREAD_STATE_RUNNING = 1;`	Thread is currently running
`THREAD_STATE_READY = 2;`	Thread is on ready queue
`THREAD_STATE_SLEEP = 3;`	Thread is sleeping
`THREAD_STATE_SUSPENDED = 4;`	Thread is suspended
`THREAD_STATE_WAIT = 5;`	Thread is on a wait list
`THREAD_STATE_WAIT_TIMEOUT = 6;`	Thread is on a wait list with timeout
`THREAD_STATE_RECEIVE = 7;`	Thread is waiting to receive a message
`THREAD_STATE_RECEIVE_TIMEOUT = 8;`	Thread is waiting to receive a message with timeout
`THREAD_STATE_HALTED = 9;`	Thread has been halted (Due to an unhandled exception etc)
`THREAD_STATE_TERMINATED = 10;`	Thread has been terminated

Thread priority THREAD_PRIORITY_*

`THREAD_PRIORITY_NONE = 0;`	Only used for IRQ/FIQ threads which are never selected for scheduling
`THREAD_PRIORITY_IDLE = 1;`
`THREAD_PRIORITY_LOWEST = 2;`
`THREAD_PRIORITY_LOWER = 3;`
`THREAD_PRIORITY_NORMAL = 4;`
`THREAD_PRIORITY_HIGHER = 5;`
`THREAD_PRIORITY_HIGHEST = 6;`
`THREAD_PRIORITY_CRITICAL = 7;`

`THREAD_PRIORITY_DEFAULT = THREAD_PRIORITY_NORMAL;`	Default thread priority
`THREAD_PRIORITY_MINIMUM = THREAD_PRIORITY_IDLE;`	Minimum thread priority
`THREAD_PRIORITY_MAXIMUM = THREAD_PRIORITY_CRITICAL;`	Maximum thread priority
`THREAD_PRIORITY_COUNT = THREAD_PRIORITY_MAXIMUM + 1;`	Number of thread priority levels

Additional priority aliases for compatibility
`THREAD_PRIORITY_BELOW_NORMAL = THREAD_PRIORITY_LOWER;`
`THREAD_PRIORITY_ABOVE_NORMAL = THREAD_PRIORITY_HIGHER;`
`THREAD_PRIORITY_TIME_CRITICAL = THREAD_PRIORITY_CRITICAL;`

Thread name THREAD_NAME_*

`THREAD_NAME_LENGTH = 256;`	Length of thread name

`IRQ_THREAD_NAME = 'IRQ';`
`FIQ_THREAD_NAME = 'FIQ';`
`SWI_THREAD_NAME = 'SWI';`
`IDLE_THREAD_NAME = 'Idle';`
`MAIN_THREAD_NAME = 'Main';`
`TIMER_THREAD_NAME = 'Timer';`
`WORKER_THREAD_NAME = 'Worker';`
`TIMER_PRIORITY_THREAD_NAME = 'Priority Timer';`
`WORKER_PRIORITY_THREAD_NAME = 'Priority Worker';`
`RTL_THREAD_NAME = 'RTL Thread';`

Thread priority *_THREAD_PRIORITY

`TIMER_THREAD_PRIORITY = THREAD_PRIORITY_NORMAL;`
`WORKER_THREAD_PRIORITY = THREAD_PRIORITY_NORMAL;`
`TIMER_PRIORITY_THREAD_PRIORITY = THREAD_PRIORITY_HIGHEST;`
`WORKER_PRIORITY_THREAD_PRIORITY = THREAD_PRIORITY_HIGHER;`

Thread create THREAD_CREATE_*

`THREAD_CREATE_NONE = $00000000;`
`THREAD_CREATE_SUSPENDED = $00000004;`

Thread TLS THREAD_TLS_*

`THREAD_TLS_FREE = $00000000;`
`THREAD_TLS_USED = $00000001;`
`THREAD_TLS_INVALID = $FFFFFFFF;`

`THREAD_TLS_MAXIMUM = SIZE_64;`	The maximum number TLS index slots available

Thread TLS flag THREAD_TLS_FLAG_*

`THREAD_TLS_FLAG_NONE = $00000000;`
`THREAD_TLS_FLAG_FREE = $00000001;`	If set then pointer in thread TLS index will be freed on ThreadReleaseTlsIndex or ThreadDestroy

Thread wait THREAD_LISTS_*

`THREAD_LISTS_MAXIMUM = SIZE_64;`	Maximum number of lists a thread can wait on at the same time

Messageslot signature MESSAGESLOT_SIGNATURE_*

`MESSAGESLOT_SIGNATURE = $B631CE4B;`

Messageslot flag MESSAGESLOT_FLAG_*

`MESSAGESLOT_FLAG_NONE = LOCK_FLAG_NONE;`
`MESSAGESLOT_FLAG_IRQ = LOCK_FLAG_IRQ;`
`MESSAGESLOT_FLAG_FIQ = LOCK_FLAG_FIQ;`
`MESSAGESLOT_FLAG_IRQFIQ = LOCK_FLAG_IRQFIQ;`

Mailslot signature MAILSLOT_SIGNATURE_*

`MAILSLOT_SIGNATURE = $7A409BF3;`

Buffer signature BUFFER_SIGNATURE_*

`BUFFER_SIGNATURE = $830BEA71;`

Buffer flag BUFFER_FLAG_*

`BUFFER_FLAG_NONE = $00000000;`
`BUFFER_FLAG_SHARED = $00000001;`	If set the buffer memory (Not the buffer entry itself) is allocated from shared memory

Event signature EVENT_SIGNATURE_*

`EVENT_SIGNATURE = $903BA69D;`

Event state EVENT_STATE_*

`EVENT_STATE_UNSIGNALED = 0;`
`EVENT_STATE_SIGNALED = 1;`

Event flag EVENT_FLAG_*

`EVENT_FLAG_NONE = $00000000;`
`EVENT_FLAG_INITIAL_STATE = $00000001;`
`EVENT_FLAG_MANUAL_RESET = $00000002;`

Timer signature TIMER_SIGNATURE_*

`TIMER_SIGNATURE = $AB7E07FB;`

Timer state TIMER_STATE_*

`TIMER_STATE_DISABLED = 0;`
`TIMER_STATE_ENABLED = 1;`

Timer flag TIMER_FLAG_*

`TIMER_FLAG_NONE = $00000000;`
`TIMER_FLAG_RESCHEDULE = $00000001;`	Timer should be rescheduled each time the event completes
`TIMER_FLAG_IMMEDIATE = $00000002;`	Timer event should be executed immediately and then each interval milliseconds
`TIMER_FLAG_WORKER = $00000004;`	Timer event should be executed by a worker thread instead of a timer thread
`TIMER_FLAG_PRIORITY = $00000008;`	Timer event should be executed by a priority timer thread

Timer key TIMER_KEY_*

`TIMER_KEY_NONE = Integer($7FFFFFFF);`	Null key value returned from an empty Timer list
`TIMER_KEY_MAX = Integer($7FFFFFFE);`	Max key that can be ordered in a Timer list
`TIMER_KEY_MIN = Integer($80000000);`	Min key that can be ordered in a Timer list

Worker signature WORKER_SIGNATURE_*

`WORKER_SIGNATURE = $EF6A901B;`

Worker flag WORKER_FLAG_*

`WORKER_FLAG_NONE = $00000000;`
`WORKER_FLAG_RESCHEDULE = $00000001;`	Worker task should be rescheduled each time the task completes
`WORKER_FLAG_IMMEDIATE = $00000002;`	Worker task should be executed immediately and then each interval milliseconds
`WORKER_FLAG_CANCEL = $00000004;`	Internal flag to indicate the worker task should be cancelled next time the interval expires
`WORKER_FLAG_NOFREE = $00000008;`	Internal flag to tell worker execute not to free the worker request when it is completed
`WORKER_FLAG_TERMINATE = $00000010;`	Internal flag to tell worker execute to terminate the worker thread
`WORKER_FLAG_IRQ = $00000020;`	Internal flag to tell worker execute to free IRQ memory when the request is completed
`WORKER_FLAG_FIQ = $00000040;`	Internal flag to tell worker execute to free FIQ memory when the request is completed
`WORKER_FLAG_PRIORITY = $00000080;`	Worker task should be executed by a priority worker thread

`WORKER_FLAG_INTERNAL = WORKER_FLAG_CANCEL or WORKER_FLAG_NOFREE or WORKER_FLAG_TERMINATE or WORKER_FLAG_IRQ or WORKER_FLAG_FIQ;`	Internal only flags

`WORKER_FLAG_EXCLUDED_IRQ = WORKER_FLAG_RESCHEDULE or WORKER_FLAG_IMMEDIATE;`	Excluded flags
`WORKER_FLAG_EXCLUDED_FIQ = WORKER_FLAG_RESCHEDULE or WORKER_FLAG_IMMEDIATE;`	Excluded flags

Tasker task TASKER_TASK_*

`TASKER_TASK_THREADSENDMESSAGE = 1;`	Perform a ThreadSendMessage() function using the tasker list
`TASKER_TASK_MESSAGESLOTSEND = 2;`	Perform a MessageslotSend() function using the tasker list
`TASKER_TASK_SEMAPHORESIGNAL = 3;`	Perform a SemaphoreSignal() function using the tasker list

Scheduler migration SCHEDULER_MIGRATION_*

`SCHEDULER_MIGRATION_DISABLED = 0;`
`SCHEDULER_MIGRATION_ENABLED = 1;`

Scheduler preempt SCHEDULER_PREEMPT_*

`SCHEDULER_PREEMPT_DISABLED = 0;`
`SCHEDULER_PREEMPT_ENABLED = 1;`

Scheduler allocation SCHEDULER_ALLOCATION_*

`SCHEDULER_ALLOCATION_DISABLED = 0;`
`SCHEDULER_ALLOCATION_ENABLED = 1;`

Scheduler mask SCHEDULER_MASK_*

`SCHEDULER_MASK_NONE = (1 shl THREAD_PRIORITY_NONE);`
`SCHEDULER_MASK_IDLE = (1 shl THREAD_PRIORITY_IDLE);`
`SCHEDULER_MASK_LOWEST = (1 shl THREAD_PRIORITY_LOWEST);`
`SCHEDULER_MASK_LOWER = (1 shl THREAD_PRIORITY_LOWER);`
`SCHEDULER_MASK_NORMAL = (1 shl THREAD_PRIORITY_NORMAL);`
`SCHEDULER_MASK_HIGHER = (1 shl THREAD_PRIORITY_HIGHER);`
`SCHEDULER_MASK_HIGHEST = (1 shl THREAD_PRIORITY_HIGHEST);`
`SCHEDULER_MASK_CRITICAL = (1 shl THREAD_PRIORITY_CRITICAL);`

Scheduler quantum SCHEDULER_QUANTUM_*

`SCHEDULER_QUANTUM_NONE = 0;`
`SCHEDULER_QUANTUM_IDLE = 0;`
`SCHEDULER_QUANTUM_LOWEST = 1;`
`SCHEDULER_QUANTUM_LOWER = 2;`
`SCHEDULER_QUANTUM_NORMAL = 4;`
`SCHEDULER_QUANTUM_HIGHER = 6;`
`SCHEDULER_QUANTUM_HIGHEST = 8;`
`SCHEDULER_QUANTUM_CRITICAL = 10;`

Thread logging THREAD_LOG_*

`THREAD_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG;`	Thread debugging messages
`THREAD_LOG_LEVEL_INFO = LOG_LEVEL_INFO;`	Thread informational messages, such as a thread being created or destroyed
`THREAD_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR;`	Thread error messages
`THREAD_LOG_LEVEL_NONE = LOG_LEVEL_NONE;`	No Thread messages

Type definitions

Spin entry

PSpinEntry = ^TSpinEntry;

TSpinEntry = record

Spin Properties
`Signature:LongWord;`	Signature for entry validation
`State:LongWord;`	State of the lock (Locked/Unlocked)
`Mask:LongWord;`	IRQ/FIQ Mask for Save/Restore
`Owner:TThreadHandle;`	Currently owning thread (or INVALID_HANDLE_VALUE if not locked)
Internal Properties
`Prev:PSpinEntry;`	Previous entry in Spin table
`Next:PSpinEntry;`	Next entry in Spin table
Statistics Properties

Mutex entry

PMutexEntry = ^TMutexEntry;

TMutexEntry = record

Mutex Properties
`Signature:LongWord;`	Signature for entry validation
`State:LongWord;`	State of the lock (Locked/Unlocked)
`Owner:TThreadHandle;`	Currently owning thread (or INVALID_HANDLE_VALUE if not locked)
`Yield:TThreadYield;`	Yield function to call while waiting
`Count:LongWord;`	Count of lock recursions (only if Flags includes MUTEX_FLAG_RECURSIVE)
`Flags:LongWord;`	Mutex Flags (eg MUTEX_FLAG_RECURSIVE)
`SpinCount:LongWord;`	Number of times to spin wait for lock before Yield is called (Always 0 if SCHEDULER_CPU_COUNT = 1)
Internal Properties
`Prev:PMutexEntry;`	Previous entry in Mutex table
`Next:PMutexEntry;`	Next entry in Mutex table
Statistics Properties

Critical section entry

PCriticalSectionEntry = ^TCriticalSectionEntry;

TCriticalSectionEntry = record

Critical Section Properties
`Signature:LongWord;`	Signature for entry validation
`State:LongWord;`	State of the lock (Locked/Unlocked)
`Count:LongWord;`	Count of lock recursions
`Owner:TThreadHandle;`	Currently owning thread (or INVALID_HANDLE_VALUE if not locked)
`SpinCount:LongWord;`	Number of times to spin wait for lock before Wait is called (Always 0 if SCHEDULER_CPU_COUNT = 1)
`Lock:TSpinHandle;`	Critical Section Lock
`List:TListHandle;`	List of threads waiting on this CriticalSection (or INVALID_HANDLE_VALUE if never used)
`Wait:TThreadWait;`	Wait function to call to wait on the CriticalSection if it is already locked
`WaitEx:TThreadWaitEx;`	Wait function to call to wait with timeout on the CriticalSection if it is already locked
`Release:TThreadRelease;`	Release function to call if any threads are waiting when CriticalSection is unlocked
`Abandon:TThreadAbandon;`	Abandon function to call if any threads are waiting when CriticalSection is destroyed
Internal Properties
`Prev:PCriticalSectionEntry;`	Previous entry in CriticalSection table
`Next:PCriticalSectionEntry;`	Next entry in CriticalSection table
Statistics Properties

Semaphore entry

PSemaphoreEntry = ^TSemaphoreEntry;

TSemaphoreEntry = record

Semaphore Properties
`Signature:LongWord;`	Signature for entry validation
`Count:LongWord;`	Count for this Semaphore (Can be negative when Threads are waiting)
`Maximum:LongWord;`	Maximum count for this Semaphore
`Flags:LongWord;`	Semaphore Flags (eg SEMAPHORE_FLAG_IRQ)
`Lock:TSpinHandle;`	Semaphore Lock
`List:TListHandle;`	List of threads waiting on this Semaphore (or INVALID_HANDLE_VALUE if never used)
`Wait:TThreadWait;`	Wait function to call to wait on the Semaphore if the count is equal to zero on SemaphoreWait
`WaitEx:TThreadWaitEx;`	Wait function to call to wait with timeout on the Semaphore if the count is equal to zero on SemaphoreWait
`Release:TThreadRelease;`	Release function to call if any threads are waiting on SemaphoreSignal
`Abandon:TThreadAbandon;`	Abandon function to call if any threads are waiting when SemaphoreSignal is destroyed
Internal Properties
`Prev:PSemaphoreEntry;`	Previous entry in Semaphore table
`Next:PSemaphoreEntry;`	Next entry in Semaphore table
Statistics Properties

Synchronizer entry

PSynchronizerEntry = ^TSynchronizerEntry;

TSynchronizerEntry = record

Synchronizer Properties
`Signature:LongWord;`	Signature for entry validation
`State:LongWord;`	State of the lock (Locked/Unlocked)
`Lock:TSpinHandle;`	Synchronizer Lock
`ReaderCount:LongWord;`	Count of current reader locks
`WriterCount:LongWord;`	Count of current writer lock recursions
`ReaderLast:TThreadHandle;`	Last thread to acquire reader lock (or INVALID_HANDLE_VALUE if no reader)
`WriterOwner:TThreadHandle;`	Currently owning writer thread (or INVALID_HANDLE_VALUE if no writer)
`ReaderList:TListHandle;`	List of reader threads waiting on this Synchronizer (or INVALID_HANDLE_VALUE if never used)
`WriterList:TListHandle;`	List of writer threads waiting on this Synchronizer (or INVALID_HANDLE_VALUE if never used)
`Wait:TThreadWait;`	Wait function to call to wait on the Synchronizer if it is already locked
`WaitEx:TThreadWaitEx;`	Wait function to call to wait with timeout on the Synchronizer if it is already locked
`Release:TThreadRelease;`	Release function to call if any threads are waiting when Synchronizer is unlocked
`Abandon:TThreadAbandon;`	Abandon function to call if any threads are waiting when Synchronizer is destroyed
Internal Properties
`Prev:PSynchronizerEntry;`	Previous entry in Synchronizer table
`Next:PSynchronizerEntry;`	Next entry in Synchronizer table
Statistics Properties

List entry

PListEntry = ^TListEntry;

TListEntry = record

List Properties
`Signature:LongWord;`	Signature for entry validation
`ListType:LongWord;`	Type of this List (eg LIST_TYPE_WAIT_SECTION)
`Count:LongWord;`	Count of items currently in this List
`Flags:LongWord;`	List Flags (eg LIST_FLAG_IRQ)
`Lock:TSpinHandle;`	List Lock
`First:PListElement;`	First element in List
`Last:PListElement;`	Last element in List
Internal Properties
`Prev:PListEntry;`	Previous entry in List table
`Next:PListEntry;`	Next entry in List table
Statistics Properties

List element

PListElement = ^TListElement;

TListElement = record

`Thread:TThreadHandle;`	The thread referenced by this List element
`Prev:PListElement;`	Previous element in List
`Next:PListElement;`	Next element in List

List handles

PListHandles = ^TListHandles;

TListHandles = array[0..THREAD_LISTS_MAXIMUM - 1] of TListHandle;

Queue entry

PQueueEntry = ^TQueueEntry;

TQueueEntry = record

Queue Properties
`Signature:LongWord;`	Signature for entry validation
`QueueType:LongWord;`	Type of this Queue (eg QUEUE_TYPE_SCHEDULE_IDLE)
`Count:LongWord;`	Count of items currently in this Queue
`Flags:LongWord;`	Queue Flags (eg QUEUE_FLAG_IRQ)
`Lock:TSpinHandle;`	Queue Lock
`First:PQueueElement;`	First element in Queue
`Last:PQueueElement;`	Last element in Queue
Internal Properties
`Prev:PQueueEntry;`	Previous entry in Queue table
`Next:PQueueEntry;`	Next entry in Queue table
Statistics Properties

Queue element

PQueueElement = ^TQueueElement;

TQueueElement = record

`Key:Integer;`	Ordering key for Queue
`Thread:TThreadHandle;`	The thread referenced by this Queue element
`Prev:PQueueElement;`	Previous element in Queue
`Next:PQueueElement;`	Next element in Queue

Message list

PMessageList = ^TMessageList;

TMessageList = record

Header Properties
`Maximum:LongWord;`	Maximum number of messages in list
`Count:LongWord;`	Current number of messages in list
`Start:LongWord;`	First message available in list
Internal Properties
`List:PMessage;`	Message list
Statistics Properties

Message

PMessage = ^TMessage;

TMessage = record

`Msg:LongWord;`
`wParam:LongInt;`
`lParam:LongInt;`
`Time:LongWord;`

Thread entry

PThreadEntry = ^TThreadEntry;

TThreadEntry = record

Thread Properties
`Signature:LongWord;`	Signature for entry validation
`State:LongWord;`	State of the Thread (eg THREAD_STATE_RUNNING)
`Flags:LongWord;`	Flags of the Thread (eg THREAD_FLAG_PERSIST)
`Priority:LongWord;`	Priority of the Thread (eg THREAD_PRIORITY_NORMAL)
`Affinity:LongWord;`	CPU Affinity mask of the Thread
`StackBase:Pointer;`	Base (Top) of the thread stack
`StackSize:LongWord;`	Stack length in bytes
`Name:array[0..THREAD_NAME_LENGTH - 1] of Char;`	The name of the Thread
`Lock:TSpinHandle;`	Thread Lock
`Parent:TThreadHandle;`	Handle of the parent thread
`Messages:TMessageList;`	Messages sent to this thread
`TlsPointer:Pointer;`	Thread Local Storage Memory (RTL ThreadVars)
`TlsTable:array[0..THREAD_TLS_MAXIMUM - 1] of Pointer;`	Thread Local Storage Index Pointers (for ThreadGetTlsValue/ThreadSetTlsValue)
`TlsFlags:array[0..THREAD_TLS_MAXIMUM - 1] of LongWord;`	Thread Local Storage Index Flags (eg THREAD_TLS_FLAG_FREE)
`ExitCode:LongWord;`	Thread Exit Code
`LastError:LongWord;`	Thread Last Error
`Locale:LCID;`	Thread Locale
Internal Properties
`CurrentCPU:LongWord;`	Saved current CPU from last ContextSwitch
`StackPointer:Pointer;`	Saved current stack pointer from last ContextSwitch
`TargetCPU:LongWord;`	Target CPU of the Thread for next ContextSwitch
`TargetPriority:LongWord;`	Target Priority of the Thread for next ContextSwitch (eg THREAD_PRIORITY_NORMAL)
`List:TListHandle;`	List of threads waiting on this thread (or INVALID_HANDLE_VALUE if never used)
`WaitList:TListHandle;`	The wait list this thread is currently in (or INVALID_HANDLE_VALUE)
`WaitLists:PListHandles;`	The wait lists this thread is currently in if doing a multiple wait (or nil)
`WaitResult:LongWord;`	The result code for the last wait with timeout (eg WAIT_TIMEOUT)
`ReceiveResult:LongWord;`	The result code for the last receive with timeout (eg WAIT_TIMEOUT)

`ListElement:TListElement;`	List element for this thread when in a Wait List
`QueueElement:TQueueElement;`	Queue element for this thread when in a Schedule Queue
`Prev:PThreadEntry;`	Previous entry in Thread table
`Next:PThreadEntry;`	Next entry in Thread table
Statistics Properties
`CreateTime:Int64;`	The time when this thread was created
`ExitTime:Int64;`	The time when this thread exited or was terminated
`KernelTime:Int64;`	The total amount of time this thread has been in the running state (ie CPU time consumed)
`SwitchCount:Int64;`	The number of times this thread has been selected to run by a context switch

Thread snapshot

PThreadSnapshot = ^TThreadSnapshot;

TThreadSnapshot = record

Note: Data returned by ThreadSnapshotCreate
Snapshot Properties
`Handle:TThreadHandle;`	Handle of the thread
`State:LongWord;`	State of the Thread (eg THREAD_STATE_RUNNING)
`Flags:LongWord;`	Flags of the Thread (eg THREAD_FLAG_PERSIST)
`CPU:LongWord;`	CPU from last ContextSwitch
`Priority:LongWord;`	Priority of the Thread (eg THREAD_PRIORITY_NORMAL)
`Affinity:LongWord;`	CPU Affinity mask of the Thread
`StackBase:Pointer;`	Base (Top) of the thread stack
`StackSize:LongWord;`	Stack length in bytes
`StackPointer:Pointer;`	Stack pointer from last ContextSwitch
`Name:array[0..THREAD_NAME_LENGTH - 1] of Char;`	The name of the Thread
`Parent:TThreadHandle;`	Handle of the parent thread
`ExitCode:LongWord;`	Thread Exit Code
`LastError:LongWord;`	Thread Last Error
`Locale:LCID;`	Thread Locale
`TargetCPU:LongWord;`	Target CPU of the Thread for next ContextSwitch
`TargetPriority:LongWord;`	Target Priority of the Thread for next ContextSwitch (eg THREAD_PRIORITY_NORMAL)
`CreateTime:Int64;`	The time when this thread was created
`ExitTime:Int64;`	The time when this thread exited or was terminated
`KernelTime:Int64;`	The total amount of time this thread has been in the running state (ie CPU time consumed)
`SwitchCount:Int64;`	The number of times this thread has been selected to run by a context switch
Internal Properties
`Next:PThreadSnapshot;`	Next entry in Thread snapshot

Messageslot entry

PMessageslotEntry = ^TMessageslotEntry;

TMessageslotEntry = record

Messageslot Properties
`Signature:LongWord;`	Signature for entry validation
`Flags:LongWord;`	Messageslot Flags (eg MESSAGESLOT_FLAG_IRQ)
`Lock:TSpinHandle;`	Messageslot Lock
`List:TListHandle;`	List of threads waiting on this Messageslot (or INVALID_HANDLE_VALUE if never used)
`Messages:TMessageList;`	Messageslot message queue
`Wait:TThreadWait;`	Wait function to call to wait on the Messageslot if there are no messages
`WaitEx:TThreadWaitEx;`	Wait function to call to wait with timeout on the Messageslot if there are no messages
`Release:TThreadRelease;`	Release function to call if any threads are waiting when a message is sent
`Abandon:TThreadAbandon;`	Abandon function to call if any threads are waiting when Messageslot is destroyed
Internal Properties
`Prev:PMessageslotEntry;`	Previous entry in Messageslot table
`Next:PMessageslotEntry;`	Next entry in Messageslot table
Statistics Properties

Mailslot entry

PMailslotEntry = ^TMailslotEntry;

TMailslotEntry = record

Mailslot Properties
`Signature:LongWord;`	Signature for entry validation
`Maximum:LongWord;`	Maximum number of messages in Mailslot
`Count:LongWord;`	Current number of messages in Mailslot
`Start:LongWord;`	First message available in Mailslot
`Lock:TSpinHandle;`	Mailslot Lock
`Sender:TSemaphoreHandle;`	Mailslot send Semaphore
`Receiver:TSemaphoreHandle;`	Mailslot receive Semaphore
`Messages:PInteger;`	Mailslot message queue
Internal Properties
`Prev:PMailslotEntry;`	Previous entry in Mailslot table
`Next:PMailslotEntry;`	Next entry in Mailslot table
Statistics Properties

Buffer entry

PBufferEntry = ^TBufferEntry;

TBufferEntry = record

Buffer Properties
`Signature:LongWord;`	Signature for entry validation
`Size:LongWord;`	Size of each buffer
`Count:LongWord;`	Number of buffers
`Flags:LongWord;`	Buffer Flags (eg BUFFER_FLAG_SHARED)
`Lock:TSpinHandle;`	Buffer Lock
`Available:TSemaphoreHandle;`	Buffer available Semaphore
`Buffers:PBufferItem;`	Buffer list
Internal Properties
`Prev:PBufferEntry;`	Previous entry in Buffer table
`Next:PBufferEntry;`	Next entry in Buffer table
`First:PBufferItem;`	First available buffer item
Statistics Properties

Buffer item

PBufferItem = ^TBufferItem;

TBufferItem = record

`Parent:TBufferHandle;`	Handle of Buffer owning this item
`Next:PBufferItem;`	Next item in list
`Buffer:Pointer;`	Pointer to item data
`Reserved:LongWord;`	Align to 16 bytes

Event entry

PEventEntry = ^TEventEntry;

TEventEntry = record

Event Properties
`Signature:LongWord;`	Signature for entry validation
`State:LongWord;`	State of the event (Signaled/Unsignaled)
`Flags:LongWord;`	Event Flags (eg EVENT_FLAG_MANUAL)
`Lock:TSpinHandle;`	Event Lock
`List:TListHandle;`	List of threads waiting on this Event (or INVALID_HANDLE_VALUE if never used)
`Wait:TThreadWait;`	Wait function to call to wait on the Event if it is not Signaled
`WaitEx:TThreadWaitEx;`	Wait function to call to wait with timeout on the Event if it is not Signaled
`Release:TThreadRelease;`	Release function to call if any threads are waiting when Event is Signaled
`Abandon:TThreadAbandon;`	Abandon function to call if any threads are waiting when Event is destroyed
Internal Properties
`Prev:PEventEntry;`	Previous entry in Event table
`Next:PEventEntry;`	Next entry in Event table
Statistics Properties

Timer list

PTimerList = ^TTimerList;

TTimerList = record

List Properties
`Count:LongWord;`	Count of items currently in the Timer list
`Flags:LongWord;`	Timer list Flags (eg LOCK_FLAG_IRQ)
`Lock:TSpinHandle;`	Timer list Lock
`First:PTimerItem;`	First item in Timer list
`Last:PTimerItem;`	Last item in Timer list
Internal Properties

Statistics Properties

Timer item

PTimerItem = ^TTimerItem;

TTimerItem = record

`Key:Integer;`	Ordering key for Timer list
`Timer:TTimerHandle;`	The timer referenced by this Timer list item
`Prev:PTimerItem;`	Previous item in Timer list
`Next:PTimerItem;`	Next item in Timer list

Timer entry

PTimerEntry = ^TTimerEntry;

TTimerEntry = record

Timer Properties
`Signature:LongWord;`	Signature for entry validation
`Interval:LongWord;`	Interval for timer (Milliseconds)
`State:LongWord;`	State of the timer (Enabled/Disabled)
`Flags:LongWord;`	Timer Flags (eg TIMER_FLAG_RESCHEDULE)
`Lock:TSpinHandle;`	Timer Lock
`Event:TTimerEvent;`	Function to call when timer triggers
`Data:Pointer;`	Data to pass to function when timer triggers
Internal Properties
`TimerList:PTimerList;`	The timer list this timer is currently in (or nil)
`TimerItem:TTimerItem;`	Timer list item for this timer when in a Timer list
`Prev:PTimerEntry;`	Previous entry in Timer table
`Next:PTimerEntry;`	Next entry in Timer table
Statistics Properties

Worker request

PWorkerRequest = ^TWorkerRequest;

TWorkerRequest = record

Worker Properties
`Signature:LongWord;`	Signature for entry validation
`Interval:LongWord;`	Interval for worker (Milliseconds)
`Flags:LongWord;`	Worker Flags (eg WORKER_FLAG_RESCHEDULE)
`Lock:TSpinHandle;`	Worker Lock (or INVALID_HANDLE_VALUE if Interval is 0 and Flags is not WORKER_FLAG_RESCHEDULE)
`Timer:TTimerHandle;`	Worker Timer (or INVALID_HANDLE_VALUE if Interval is 0)
`Task:TWorkerTask;`	Task to call by worker
`Data:Pointer;`	Data to pass to task
`Callback:TWorkerCallback;`	Callback when task is completed

Tasker list

PTaskerList = ^TTaskerList;

TTaskerList = record

List Properties
`Count:LongWord;`	Count of tasks currently in the Tasker list
`Lock:TSpinHandle;`	Tasker list Lock
`First:PTaskerTask;`	First task in Tasker list
`Last:PTaskerTask;`	Last task in Tasker list
Internal Properties

Statistics Properties

Tasker task

PTaskerTask = ^TTaskerTask;

TTaskerTask = record

`Task:LongWord;`	The task to be performed
`Prev:PTaskerTask;`	Previous task in Tasker list
`Next:PTaskerTask;`	Next task in Tasker list

Tasker thread send message

PTaskerThreadSendMessage = ^TTaskerThreadSendMessage;

TTaskerThreadSendMessage = record

`Task:LongWord;`	The task to be performed
`Prev:PTaskerTask;`	Previous task in Tasker list
`Next:PTaskerTask;`	Next task in Tasker list
Internal Properties
`Thread:TThreadHandle;`	Handle of the thread to send a message to
`Message:TMessage;`	Message to send to the thread

Tasker messageslot send

PTaskerMessageslotSend = ^TTaskerMessageslotSend;

TTaskerMessageslotSend = record

`Task:LongWord;`	The task to be performed
`Prev:PTaskerTask;`	Previous task in Tasker list
`Next:PTaskerTask;`	Next task in Tasker list
Internal Properties
`Messageslot:TMessageslotHandle;`	Handle of the messageslot to send to
`Message:TMessage;`	Message to be sent

Tasker semaphore signal

PTaskerSemaphoreSignal = ^TTaskerSemaphoreSignal;

TTaskerSemaphoreSignal = record

`Task:LongWord;`	The task to be performed
`Prev:PTaskerTask;`	Previous task in Tasker list
`Next:PTaskerTask;`	Next task in Tasker list
Internal Properties
`Semaphore:TSemaphoreHandle;`	Handle of the semaphore to signal
`Count:LongWord;`	The count to be signalled

Thread info

PThreadInfo = ^TThreadInfo;

TThreadInfo = record

`ThreadFunction:TThreadFunc;`
`ThreadParameter:Pointer;`
`StackLength:Cardinal;`

CPU start

`TCPUStart = procedure(CPUID:LongWord);`

Primary initialization

`TPrimaryInit = procedure;`

Scheduler initialization

`TSchedulerInit = procedure;`

Scheduler start

`TSchedulerStart = procedure(CPUID:LongWord);`

Secondary initialization

`TSecondaryInit = procedure;`

Secondary boot

`TSecondaryBoot = procedure(CPUID:LongWord);`

Spin lock

`TSpinLock = function(Spin:PSpinEntry):LongWord;`

Spin unlock

`TSpinUnlock = function(Spin:PSpinEntry):LongWord;`

Spin lock IRQ

`TSpinLockIRQ = function(Spin:PSpinEntry):LongWord;`

Spin unlock IRQ

`TSpinUnlockIRQ = function(Spin:PSpinEntry):LongWord;`

Spin lock FIQ

`TSpinLockFIQ = function(Spin:PSpinEntry):LongWord;`

Spin unlock FIQ

`TSpinUnlockFIQ = function(Spin:PSpinEntry):LongWord;`

Spin lock IRQ/FIQ

`TSpinLockIRQFIQ = function(Spin:PSpinEntry):LongWord;`

Spin unlock IRQ/FIQ

`TSpinUnlockIRQFIQ = function(Spin:PSpinEntry):LongWord;`

Spin check IRQ

`TSpinCheckIRQ = function(Spin:PSpinEntry):Boolean;`

Spin check FIQ

`TSpinCheckFIQ = function(Spin:PSpinEntry):Boolean;`

Spin exchange IRQ

`TSpinExchangeIRQ = function(Spin1,Spin2:PSpinEntry):LongWord;`

Spin exchange FIQ

`TSpinExchangeFIQ = function(Spin1,Spin2:PSpinEntry):LongWord;`

Spin mask exchange

`TSpinMaskExchange = function(Spin1,Spin2:PSpinEntry):LongWord;`

Mutex lock

`TMutexLock = function(Mutex:PMutexEntry):LongWord;`

Mutex unlock

`TMutexUnlock = function(Mutex:PMutexEntry):LongWord;`

Mutex try lock

`TMutexTryLock = function(Mutex:PMutexEntry):LongWord;`

Critical section lock

`TCriticalSectionLock = function(CriticalSection:PCriticalSectionEntry):LongWord;`

Critical section lock ex

`TCriticalSectionLockEx = function(CriticalSection:PCriticalSectionEntry; Timeout:LongWord):LongWord;`

Critical section unlock

`TCriticalSectionUnlock = function(CriticalSection:PCriticalSectionEntry):LongWord;`

Critical section try lock

`TCriticalSectionTryLock = function(CriticalSection:PCriticalSectionEntry):LongWord;`

Semaphore wait

`TSemaphoreWait = function(Semaphore:PSemaphoreEntry):LongWord;`

Semaphore wait ex

`TSemaphoreWaitEx = function(Semaphore:PSemaphoreEntry; Timeout:LongWord):LongWord;`

Semaphore signal

`TSemaphoreSignal = function(Semaphore:PSemaphoreEntry):LongWord;`

Synchronizer lock

`TSynchronizerLock = function(Synchronizer:PSynchronizerEntry):LongWord;`

Synchronizer lock ex

`TSynchronizerLockEx = function(Synchronizer:PSynchronizerEntry; Timeout:LongWord):LongWord;`

Synchronizer unlock

`TSynchronizerUnlock = function(Synchronizer:PSynchronizerEntry):LongWord;`

Synchronizer convert

`TSynchronizerConvert = function(Synchronizer:PSynchronizerEntry):LongWord;`

Synchronizer convert ex

`TSynchronizerConvertEx = function(Synchronizer:PSynchronizerEntry; Timeout:LongWord):LongWord;`

Messageslot send

`TMessageslotSend = function(Messageslot:PMessageslotEntry; Message:PMessage):LongWord;`

Messageslot receive

`TMessageslotReceive = function(Messageslot:PMessageslotEntry; Message:PMessage):LongWord;`

Messageslot receive ex

`TMessageslotReceiveEx = function(Messageslot:PMessageslotEntry; Message:PMessage; Timeout:LongWord):LongWord;`

Mailslot send

`TMailslotSend = function(Mailslot:PMailslotEntry; Data:Integer):LongWord;`

Mailslot send ex

`TMailslotSendEx = function(Mailslot:PMailslotEntry; Data:Integer; Timeout:LongWord):LongWord;`

Mailslot receive

`TMailslotReceive = function(Mailslot:PMailslotEntry):Integer;`

Mailslot receive ex

`TMailslotReceiveEx = function(Mailslot:PMailslotEntry; Timeout:LongWord):Integer;`

Buffer get

`TBufferGet = function(Buffer:PBufferEntry):Pointer;`

Buffer get ex

`TBufferGetEx = function(Buffer:PBufferEntry; Timeout:LongWord):Pointer;`

Buffer free

`TBufferFree = function(Buffer:Pointer):LongWord;`

Buffer iterate

`TBufferIterate = function(Buffer:PBufferEntry; Previous:Pointer):Pointer;`

Event wait

`TEventWait = function(Event:PEventEntry):LongWord;`

Event wait ex

`TEventWaitEx = function(Event:PEventEntry; Timeout:LongWord):LongWord;`

Event set

`TEventSet = function(Event:PEventEntry):LongWord;`

Event reset

`TEventReset = function(Event:PEventEntry):LongWord;`

Event pulse

`TEventPulse = function(Event:PEventEntry):LongWord;`

Timer enable

`TTimerEnable = function(Timer:PTimerEntry):LongWord;`

Timer enable ex

`TTimerEnableEx = function(Timer:PTimerEntry; Interval:LongWord; Event:TTimerEvent; Data:Pointer):LongWord;`

Timer disable

`TTimerDisable = function(Timer:PTimerEntry):LongWord;`

Timer check

`TTimerCheck = function:LongWord;`

Timer trigger

`TTimerTrigger = function:LongWord;`

Tasker check

`TTaskerCheck = function:LongWord;`

Tasker trigger

`TTaskerTrigger = function:LongWord;`

Thread get current

`TThreadGetCurrent = function:TThreadHandle;`

Thread set current

`TThreadSetCurrent = function(Thread:TThreadHandle):LongWord;`

Thread start

`TThreadStart = function(Parameter:Pointer):PtrInt;`

Thread end

`TThreadEnd = procedure(ExitCode:LongWord);`

Scheduler check

`TSchedulerCheck = function(CPUID:LongWord):LongWord;`

Scheduler wakeup

`TSchedulerWakeup = function(CPUID:LongWord):LongWord;`

Scheduler expire

`TSchedulerExpire = function(CPUID:LongWord):LongWord;`

Scheduler switch

`TSchedulerSwitch = function(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;`

Scheduler select

`TSchedulerSelect = function(CPUID:LongWord; Thread:TThreadHandle; Yield:Boolean):TThreadHandle;`

Scheduler reschedule

`TSchedulerReschedule = function (Yield:Boolean):LongWord;`

Scheduler migration enable

`TSchedulerMigrationEnable = function:LongWord;`

Scheduler migration disable

`TSchedulerMigrationDisable = function:LongWord;`

Scheduler preempt enable

`TSchedulerPreemptEnable = function(CPUID:LongWord):LongWord;`

Scheduler preempt disable

`TSchedulerPreemptDisable = function(CPUID:LongWord):LongWord;`

Scheduler allocation enable

`TSchedulerAllocationEnable = function(CPUID:LongWord):LongWord;`

Scheduler allocation disable

`TSchedulerAllocationDisable = function(CPUID:LongWord):LongWord;`

Thread setup stack

`TThreadSetupStack = function(StackBase:Pointer; StartProc:TThreadStart; ReturnProc:TThreadEnd; Parameter:Pointer):Pointer;`

Public variables

Thread logging

`THREAD_DEFAULT_LOG_LEVEL:LongWord = THREAD_LOG_LEVEL_DEBUG;`	Minimum level for Thread messages. Only messages with level greater than or equal to this will be printed.

`THREAD_LOG_ENABLED:Boolean;`

Scheduler variables

`SchedulerThreadNext:LongWord;`	The CPU to assign the next created thread to, round robin incremented on each create (Protected by ThreadTableLock)

`SchedulerThreadMigration:LongWord;`	Enable or Disable thread migration (SCHEDULER_MIGRATION_DISABLED or SCHEDULER_MIGRATION_ENABLED

`SchedulerMigrationQuantum:LongWord;`	Quantum for thread migration checks (CPU 0 only)

`SchedulerThreadCount:array of LongWord;`	Current number of ready threads per CPU (One per CPU, allocated by scheduler initialization) (Protected by InterlockedIncrement/Decrement)

`SchedulerThreadQuantum:array of LongWord;`	Quantum of current thread per CPU (One per CPU, allocated by scheduler initialization)

`SchedulerThreadPreempt:array of LongWord;`	Current state of thread preemption per CPU (eg SCHEDULER_PREEMPT_DISABLED) (One per CPU, allocated by scheduler initialization)

`SchedulerThreadAllocation:array of LongWord;`	Current state of thread allocation per CPU (eg SCHEDULER_ALLOCATION_DISABLED) (One per CPU, allocated by scheduler initialization)

`SchedulerPriorityMask:array of LongWord;`	Mask of ready threads at each priority level (One per CPU, allocated by scheduler initialization) (Protected by InterlockedOr/And)

`SchedulerYieldCurrent:array of LongBool;`	Scheduler yield to current priority level status (One per CPU, allocated by scheduler initialization)

`SchedulerStarvationNext:array of LongWord;`	Scheduler starvation priority round robin (One per CPU, allocated by scheduler initialization)

`SchedulerStarvationQuantum:array of LongWord;`	Quantum for thread starvation checks per CPU (One per CPU, allocated by scheduler initialization)

`SchedulerNoneQueue:array of TQueueHandle;`	Queue of threads that are ready to run at priority level none (One per CPU, allocated by scheduler initialization)

`SchedulerIdleQueue:array of TQueueHandle;`	Queue of threads that are ready to run at priority level idle (One per CPU, allocated by scheduler initialization)

`SchedulerLowestQueue:array of TQueueHandle;`	Queue of threads that are ready to run at priority level lowest (One per CPU, allocated by scheduler initialization)

`SchedulerLowerQueue:array of TQueueHandle;`	Queue of threads that are ready to run at priority level lower (One per CPU, allocated by scheduler initialization)

`SchedulerNormalQueue:array of TQueueHandle;`	Queue of threads that are ready to run at priority level normal (One per CPU, allocated by scheduler initialization)

`SchedulerHigherQueue:array of TQueueHandle;`	Queue of threads that are ready to run at priority level higher (One per CPU, allocated by scheduler initialization)

`SchedulerHighestQueue:array of TQueueHandle;`	Queue of threads that are ready to run at priority level highest (One per CPU, allocated by scheduler initialization)

`SchedulerCriticalQueue:array of TQueueHandle;`	Queue of threads that are ready to run at priority level critical (One per CPU, allocated by scheduler initialization)

`SchedulerSleepQueue:array of TQueueHandle;`	Queue of threads that are currently sleeping (One per CPU, allocated by scheduler initialization)

`SchedulerTimeoutQueue:array of TQueueHandle;`	Queue of threads that are currently waiting with a timeout (One per CPU, allocated by scheduler initialization)

`SchedulerTerminationQueue:array of TQueueHandle;`	Queue of threads that have been terminated (One per CPU, allocated by scheduler initialization)

`SchedulerLast:array of LongWord;`	The timer value of the last scheduler interrupt (One per CPU, allocated by scheduler initialization)

`SchedulerInterrupts:array of LongWord;`	Current number of scheduler interrupts per CPU (When this reaches SCHEDULER_INTERRUPTS_PER_SECOND then UtilizationLast is updated and UtilizationCurrent is reset) (One per CPU, allocated by scheduler initialization)

Heap manager variables

`HeapLock:THeapLock;`

RTL thread manager variables

`ThreadVarBlockSize:DWORD;`

Inititalization handlers

`PrimaryInitHandler:TPrimaryInit;`

`SchedulerInitHandler:TSchedulerInit;`

`SchedulerStartHandler:TSchedulerStart;`

`SecondaryInitHandler:TSecondaryInit;`

`SecondaryBootHandler:TSecondaryBoot;`

SpinLock/Unlock handlers

`SpinLockHandler:TSpinLock;`

`SpinUnlockHandler:TSpinUnlock;`

`SpinLockIRQHandler:TSpinLockIRQ;`

`SpinUnlockIRQHandler:TSpinUnlockIRQ;`

`SpinLockFIQHandler:TSpinLockFIQ;`

`SpinUnlockFIQHandler:TSpinUnlockFIQ;`

`SpinLockIRQFIQHandler:TSpinLockIRQFIQ;`

`SpinUnlockIRQFIQHandler:TSpinUnlockIRQFIQ;`

`SpinCheckIRQHandler:TSpinCheckIRQ;`

`SpinCheckFIQHandler:TSpinCheckFIQ;`

`SpinExchangeIRQHandler:TSpinExchangeIRQ;`

`SpinExchangeFIQHandler:TSpinExchangeFIQ;`

`SpinMaskExchangeHandler:TSpinMaskExchange;`

MutexLock/Unlock handlers

`MutexLockHandler:TMutexLock;`

`MutexUnlockHandler:TMutexUnlock;`

`MutexTryLockHandler:TMutexTryLock;`

CriticalSection Lock/Unlock/TryLock handlers

`CriticalSectionLockHandler:TCriticalSectionLock;`

`CriticalSectionLockExHandler:TCriticalSectionLockEx;`

`CriticalSectionUnlockHandler:TCriticalSectionUnlock;`

`CriticalSectionTryLockHandler:TCriticalSectionTryLock;`

Semaphore Wait/Signal handlers

`SemaphoreWaitHandler:TSemaphoreWait;`

`SemaphoreWaitExHandler:TSemaphoreWaitEx;`

`SemaphoreSignalHandler:TSemaphoreSignal;`

Synchronizer Reader/WriterLock/Unlock handlers

`SynchronizerReaderLockHandler:TSynchronizerLock;`

`SynchronizerWriterLockHandler:TSynchronizerLock;`

`SynchronizerReaderLockExHandler:TSynchronizerLockEx;`

`SynchronizerWriterLockExHandler:TSynchronizerLockEx;`

`SynchronizerReaderUnlockHandler:TSynchronizerUnlock;`

`SynchronizerWriterUnlockHandler:TSynchronizerUnlock;`

`SynchronizerReaderConvertHandler:TSynchronizerConvert;`

`SynchronizerWriterConvertHandler:TSynchronizerConvert;`

`SynchronizerReaderConvertExHandler:TSynchronizerConvertEx;`

Messageslot send and receive handlers

`MessageslotSendHandler:TMessageslotSend;`

`MessageslotReceiveHandler:TMessageslotReceive;`

`MessageslotReceiveExHandler:TMessageslotReceiveEx;`

Mailslot send and receive handlers

`MailslotSendHandler:TMailslotSend;`

`MailslotSendExHandler:TMailslotSendEx;`

`MailslotReceiveHandler:TMailslotReceive;`

`MailslotReceiveExHandler:TMailslotReceiveEx;`

Buffer Get/GetEx/Free handlers

`BufferGetHandler:TBufferGet;`

`BufferGetExHandler:TBufferGetEx;`

`BufferFreeHandler:TBufferFree;`

`BufferIterateHandler:TBufferIterate;`

Event Wait/Set/Reset/Pulse handlers

`EventWaitHandler:TEventWait;`

`EventWaitExHandler:TEventWaitEx;`

`EventSetHandler:TEventSet;`

`EventResetHandler:TEventReset;`

`EventPulseHandler:TEventPulse;`

Timer Enable/Disable/Check/Trigger handlers

`TimerEnableHandler:TTimerEnable;`

`TimerEnableExHandler:TTimerEnableEx;`

`TimerDisableHandler:TTimerDisable;`

`TimerCheckHandler:TTimerCheck;`

`TimerTriggerHandler:TTimerTrigger;`

Tasker Check/Trigger handlers

`TaskerCheckHandler:TTaskerCheck;`

`TaskerTriggerHandler:TTaskerTrigger;`

Thread Get/SetCurrent handlers

`ThreadGetCurrentHandler:TThreadGetCurrent;`

`ThreadSetCurrentHandler:TThreadSetCurrent;`

Scheduler Check/Wakeup/Expire/Select/Switch handlers

`SchedulerCheckHandler:TSchedulerCheck;`

`SchedulerWakeupHandler:TSchedulerWakeup;`

`SchedulerExpireHandler:TSchedulerExpire;`

`SchedulerSwitchHandler:TSchedulerSwitch;`

`SchedulerSelectHandler:TSchedulerSelect;`

`SchedulerRescheduleHandler:TSchedulerReschedule;`

`SchedulerMigrationEnableHandler:TSchedulerMigrationEnable;`

`SchedulerMigrationDisableHandler:TSchedulerMigrationDisable;`

`SchedulerPreemptEnableHandler:TSchedulerPreemptEnable;`

`SchedulerPreemptDisableHandler:TSchedulerPreemptDisable;`

`SchedulerAllocationEnableHandler:TSchedulerAllocationEnable;`

`SchedulerAllocationDisableHandler:TSchedulerAllocationDisable;`

Thread SetupStack handlers

`ThreadSetupStackHandler:TThreadSetupStack;`

Function declarations

Initialization functions

procedure LocksInit;

Description: Initialize Locks

Note	None documented

procedure ThreadsInit;

Description: Initialize Threading

Note	None documented

procedure PrimaryInit;

Description: Initialize the primary CPU

Note	None documented

procedure SchedulerInit;

Description: Initialize the thread scheduler

Note	None documented

procedure SchedulerStart(CPUID:LongWord);

Description: Initialize the thread scheduler for secondary CPUs (Where Applicable)

Note	None documented

procedure SecondaryInit;

Description: Initialize the secondary CPUs (Where Applicable)

Note	None documented

procedure SecondaryBoot(CPUID:LongWord);

Description: Boot the specified secondary CPU (Where Applicable)

Note	None documented

procedure SecondaryStart(CPUID:LongWord);

Description: Startup procedure for secondary CPUs (Where Applicable)

Note	The Secondary Boot procedure should have already cleared L1 cache, enabled FPU, MMU, Vectors and PageTables before calling this function. The thread Id of the IRQ or FIQ should also have been loaded into the appropriate registers.

function IRQExecute(Parameter:Pointer):PtrInt;

Description: To be documented

Note	None documented

function FIQExecute(Parameter:Pointer):PtrInt;

Description: To be documented

Note	None documented

function SWIExecute(Parameter:Pointer):PtrInt;

Description: To be documented

Note	None documented

function IdleExecute(Parameter:Pointer):PtrInt;

Description: To be documented

Note	None documented

function MainExecute(Parameter:Pointer):PtrInt;

Description: To be documented

Note	None documented

function TimerExecute(Parameter:Pointer):PtrInt;

Description: To be documented

Note	None documented

function WorkerExecute(Parameter:Pointer):PtrInt;

Description: To be documented

Note	None documented

function TimerPriorityExecute(Parameter:Pointer):PtrInt;

Description: To be documented

Note	None documented

function WorkerPriorityExecute(Parameter:Pointer):PtrInt;

Description: To be documented

Note	None documented

function IdleCalibrate:LongWord;

Description: Calibrate the idle thread loop by counting the number of loops in 100ms

Note	None documented

Spin functions

function SpinCreate:TSpinHandle; {$IFDEF SPIN_INLINE}inline; {$ENDIF}

Description: Create and insert a new Spin entry

Return	Handle of new Spin entry or INVALID_HANDLE_VALUE if entry could not be created

function SpinCreateEx(InitialOwner:Boolean):TSpinHandle;

Description: Create and insert a new Spin entry

InitialOwner	If true set the state of the spin to locked and the owner to the current thread
Return	Handle of new Spin entry or INVALID_HANDLE_VALUE if entry could not be created

function SpinDestroy(Spin:TSpinHandle):LongWord;

Description: Destroy and remove an existing Spin entry

Spin	Handle of Spin entry to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function SpinOwner(Spin:TSpinHandle):TThreadHandle;

Description: Get the current owner of an existing Spin entry

Spin	Handle of Spin entry to get owner for
Return	Handle of owning thread or INVALID_HANDLE_VALUE if not currently owned

function SpinLock(Spin:TSpinHandle):LongWord; {$IFDEF SPIN_INLINE}inline; {$ENDIF}

Description: Lock an existing Spin entry

Spin	Handle of Spin entry to lock
Return	ERROR_SUCCESS if completed or another error code on failure

function SpinUnlock(Spin:TSpinHandle):LongWord; {$IFDEF SPIN_INLINE}inline; {$ENDIF}

Description: Unlock an existing Spin entry

Spin	Handle of Spin entry to unlock
Return	ERROR_SUCCESS if completed or another error code on failure

function SpinLockIRQ(Spin:TSpinHandle):LongWord; {$IFDEF SPIN_INLINE}inline; {$ENDIF}

Description: Lock an existing Spin entry, disable IRQ and save the previous IRQ state

Spin	Handle of Spin entry to lock
Return	ERROR_SUCCESS if completed or another error code on failure

function SpinUnlockIRQ(Spin:TSpinHandle):LongWord; {$IFDEF SPIN_INLINE}inline; {$ENDIF}

Description: Unlock an existing Spin entry and restore the previous IRQ state

Spin	Handle of Spin entry to unlock
Return	ERROR_SUCCESS if completed or another error code on failure

function SpinLockFIQ(Spin:TSpinHandle):LongWord; {$IFDEF SPIN_INLINE}inline; {$ENDIF}

Description: Lock an existing Spin entry, disable FIQ and save the previous FIQ state

Spin	Handle of Spin entry to lock
Return	ERROR_SUCCESS if completed or another error code on failure

function SpinUnlockFIQ(Spin:TSpinHandle):LongWord; {$IFDEF SPIN_INLINE}inline; {$ENDIF}

Description: Unlock an existing Spin entry and restore the previous FIQ state

Spin	Handle of Spin entry to unlock
Return	ERROR_SUCCESS if completed or another error code on failure

function SpinLockIRQFIQ(Spin:TSpinHandle):LongWord; {$IFDEF SPIN_INLINE}inline; {$ENDIF}

Description: Lock an existing Spin entry, disable IRQ and FIQ and save the previous IRQ and FIQ state

Spin	Handle of Spin entry to lock
Return	ERROR_SUCCESS if completed or another error code on failure

function SpinUnlockIRQFIQ(Spin:TSpinHandle):LongWord; {$IFDEF SPIN_INLINE}inline; {$ENDIF}

Description: Unlock an existing Spin entry and restore the previous IRQ and FIQ state

Spin	Handle of Spin entry to unlock
Return	ERROR_SUCCESS if completed or another error code on failure

function SpinCheckIRQ(Spin:TSpinHandle):Boolean;

Description: Check the mask that stores the previous IRQ state to determine if IRQ is enabled

Spin	Handle of Spin entry to check
Return	True if the mask would enable IRQ on restore, False if it would not
Note	The Spin entry must be locked by the current thread

function SpinCheckFIQ(Spin:TSpinHandle):Boolean;

Description: Check the mask that stores the previous FIQ state to determine if FIQ is enabled

Spin	Handle of Spin entry to check
Return	True if the mask would enable FIQ on restore, False if it would not
Note	The Spin entry must be locked by the current thread

function SpinExchangeIRQ(Spin1,Spin2:TSpinHandle):LongWord;

Description: Exchange the previous IRQ state between two Spin entries

Spin1	Handle of first Spin entry
Spin2	Handle of second Spin entry
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Both Spin entries must be locked by the current thread

function SpinExchangeFIQ(Spin1,Spin2:TSpinHandle):LongWord;

Description: Exchange the previous FIQ state between two Spin entries

Spin1	Handle of first Spin entry
Spin2	Handle of second Spin entry
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Both Spin entries must be locked by the current thread

function SpinLockDefault(SpinEntry:PSpinEntry):LongWord;

Description: Default version of SpinLock function used if no handler is registered

Note	Not intended to be called directly by applications, use SpinLock instead

function SpinUnlockDefault(SpinEntry:PSpinEntry):LongWord;

Description: Default version of SpinUnlock function used if no handler is registered

Note	Not intended to be called directly by applications, use SpinUnlock instead

function SpinLockIRQDefault(SpinEntry:PSpinEntry):LongWord;

Description: Default version of SpinLockIRQ function used if no handler is registered

Note	Not intended to be called directly by applications, use SpinLockIRQ instead

function SpinUnlockIRQDefault(SpinEntry:PSpinEntry):LongWord;

Description: Default version of SpinUnlockIRQ function used if no handler is registered

Note	Not intended to be called directly by applications, use SpinUnlockIRQ instead

function SpinLockFIQDefault(SpinEntry:PSpinEntry):LongWord;

Description: Default version of SpinLockFIQ function used if no handler is registered

Note	Not intended to be called directly by applications, use SpinLockFIQ instead

function SpinUnlockFIQDefault(SpinEntry:PSpinEntry):LongWord;

Description: Default version of SpinUnlockFIQ function used if no handler is registered

Note	Not intended to be called directly by applications, use SpinUnlockFIQ instead

function SpinLockIRQFIQDefault(SpinEntry:PSpinEntry):LongWord;

Description: Default version of SpinLockIRQFIQ function used if no handler is registered

Note	Not intended to be called directly by applications, use SpinLockIRQFIQ instead

function SpinUnlockIRQFIQDefault(SpinEntry:PSpinEntry):LongWord;

Description: Default version of SpinUnlockIRQFIQ function used if no handler is registered

Note	Not intended to be called directly by applications, use SpinUnlockIRQFIQ instead

Mutex functions

function MutexCreate:TMutexHandle; {$IFDEF MUTEX_INLINE}inline; {$ENDIF}

Description: Create and insert a new Mutex entry

Return	Handle of new Mutex entry or INVALID_HANDLE_VALUE if entry could not be created

function MutexCreateEx(InitialOwner:Boolean; SpinCount:LongWord; Flags:LongWord):TMutexHandle;

Description: Create and insert a new Mutex entry

InitialOwner	If true set the state of the mutex to locked and the owner to the current thread
SpinCount	The number of times the mutex will spin before yielding (Always 0 if CPU count equals 1)
Flags	The flags for the Mutex entry (eg MUTEX_FLAG_RECURSIVE)
Return	Handle of new Mutex entry or INVALID_HANDLE_VALUE if entry could not be created

function MutexDestroy(Mutex:TMutexHandle):LongWord;

Description: Destroy and remove an existing Mutex entry

Mutex	Handle of Mutex entry to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function MutexFlags(Mutex:TMutexHandle):LongWord;

Description: Get the current flags of an existing Mutex entry

Mutex	Handle of Mutex entry to get flags for
Return	Current flags or INVALID_HANDLE_VALUE on error

function MutexCount(Mutex:TMutexHandle):LongWord;

Description: Get the current lock count of an existing Mutex entry

Mutex	Mutex to get count for
Return	Current lock count or INVALID_HANDLE_VALUE on error
Note	Count is only valid if Flags includes MUTEX_FLAG_RECURSIVE

function MutexOwner(Mutex:TMutexHandle):TThreadHandle;

Description: Get the current owner of an existing Mutex entry

Mutex	Handle of Mutex entry to get owner for
Return	Handle of owning thread or INVALID_HANDLE_VALUE if not currently owned

function MutexLock(Mutex:TMutexHandle):LongWord; {$IFDEF MUTEX_INLINE}inline; {$ENDIF}

Description: Lock an existing Mutex entry

Mutex	Handle of Mutex entry to lock
Return	ERROR_SUCCESS if completed or another error code on failure

function MutexUnlock(Mutex:TMutexHandle):LongWord; {$IFDEF MUTEX_INLINE}inline; {$ENDIF}

Description: Unlock an existing Mutex entry

Mutex	Handle of Mutex entry to unlock
Return	ERROR_SUCCESS if completed or another error code on failure

function MutexTryLock(Mutex:TMutexHandle):LongWord; {$IFDEF MUTEX_INLINE}inline; {$ENDIF}

Description: Try to lock an existing Mutex entry. If the Mutex is not locked then lock it and mark the owner as the current thread. If the Mutex is already locked then return immediately with an error and do not wait for it to be unlocked.

Mutex	Mutex to try to lock
Return	ERROR_SUCCESS if completed, ERROR_LOCKED if already locked or another error code on failure

function MutexLockDefault(MutexEntry:PMutexEntry):LongWord;

Description: Default version of MutexLock function used if no handler is registered

Note	Not intended to be called directly by applications, use MutexLock instead

function MutexUnlockDefault(MutexEntry:PMutexEntry):LongWord;

Description: Default version of MutexUnlock function used if no handler is registered

Note	Not intended to be called directly by applications, use MutexUnlock instead

function MutexTryLockDefault(MutexEntry:PMutexEntry):LongWord;

Description: Default version of MutexTryLock function used if no handler is registered

Note	Not intended to be called directly by applications, use MutexTryLock instead

Critical section functions

function CriticalSectionCreate:TCriticalSectionHandle;

Description: Create and insert a new CriticalSection entry

Return	Handle of new CriticalSection entry or INVALID_HANDLE_VALUE if entry could not be created

function CriticalSectionCreateEx(InitialOwner:Boolean; SpinCount:LongWord):TCriticalSectionHandle;

Description: Create and insert a new CriticalSection entry

CriticalSection	If true set the state of the criticalsection to locked and the owner to the current thread
SpinCount	The number of times the criticalsection will spin before waiting (Always 0 if CPU count equals 1)
Return	Handle of new CriticalSection entry or INVALID_HANDLE_VALUE if entry could not be created

function CriticalSectionDestroy(CriticalSection:TCriticalSectionHandle):LongWord;

Description: Destroy and remove an existing CriticalSection entry

CriticalSection	Handle of CriticalSection entry to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function CriticalSectionCount(CriticalSection:TCriticalSectionHandle):LongWord;

Description: Get the current lock count of an existing CriticalSection entry

CriticalSection	CriticalSection to get count for
Return	Current lock count or INVALID_HANDLE_VALUE on error

function CriticalSectionOwner(CriticalSection:TCriticalSectionHandle):TThreadHandle;

Description: Get the current owner of an existing CriticalSection entry

CriticalSection	CriticalSection to get owner for
Return	Handle of owning thread or INVALID_HANDLE_VALUE if not currently owned

function CriticalSectionSetSpinCount(CriticalSection:TCriticalSectionHandle; SpinCount:LongWord):LongWord;

Description: Set the spin count of an existing CriticalSection entry

CriticalSection	CriticalSection to set spin count for
SpinCount	The spin count value to set
Return	Current spin count or INVALID_HANDLE_VALUE on error

function CriticalSectionLock(CriticalSection:TCriticalSectionHandle):LongWord;

Description: Lock an existing CriticalSection entry

CriticalSection	CriticalSection to lock
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the CriticalSection is not locked then lock it, set the count to one and mark the owner as the current thread. If the CriticalSection is already locked by the current thread then increment the count and return immediately. If the CriticalSection is already locked by another thread then wait until it is unlocked.

function CriticalSectionLockEx(CriticalSection:TCriticalSectionHandle; Timeout:LongWord):LongWord;

Description: Lock an existing CriticalSection entry

CriticalSection	CriticalSection to lock
Timeout	Milliseconds to wait before timeout (0 equals do not wait, INFINITE equals wait forever)
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the CriticalSection is not locked then lock it, set the count to one and mark the owner as the current thread. If the CriticalSection is already locked by the current thread then increment the count and return immediately. If the CriticalSection is already locked by another thread then wait until it is unlocked.

function CriticalSectionUnlock(CriticalSection:TCriticalSectionHandle):LongWord;

Description: Unlock an existing CriticalSection entry

CriticalSection	CriticalSection to unlock
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the CriticalSection is locked by the current thread then decrement the count. If the count is greater than zero then return immediately. If the count reaches zero then unlock the CriticalSection and release the first thread waiting for it to be unlocked. If the CriticalSection is locked by another thread then return an error. If the CriticalSection is not locked then return an error.

function CriticalSectionTryLock(CriticalSection:TCriticalSectionHandle):LongWord;

Description: Try to lock an existing CriticalSection entry

CriticalSection	CriticalSection to try to lock
Return	ERROR_SUCCESS if completed, ERROR_LOCKED if locked by another thread or another error code on failure
Note	If the CriticalSection is not locked then lock it, set the count to one and mark the owner as the current thread. If the CriticalSection is already locked by the current thread then increment the count and return immediately. If the CriticalSection is already locked by another thread then return immediately with an error and do not wait for it to be unlocked.

Semaphore functions

function SemaphoreCreate(Count:LongWord):TSemaphoreHandle;

Description: Create and insert a new Semaphore entry

Count	The initial count of the Semaphore (Must be greater than or equal to zero)
Return	Handle of new Semaphore entry or INVALID_HANDLE_VALUE if entry could not be created

function SemaphoreCreateEx(Count,Maximum:LongWord; Flags:LongWord):TSemaphoreHandle;

Description: Create and insert a new Semaphore entry

Count	The initial count of the Semaphore (Must be greater than or equal to zero)
Maximum	The maximum count of the Semaphore (Must be greater than one)
Flags	The flags for the Semaphore entry (eg SEMAPHORE_FLAG_IRQ)
Return	Handle of new Semaphore entry or INVALID_HANDLE_VALUE if entry could not be created

function SemaphoreDestroy(Semaphore:TSemaphoreHandle):LongWord;

Description: Destroy and remove an existing Semaphore entry

Semaphore	Handle of Semaphore entry to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function SemaphoreCount(Semaphore:TSemaphoreHandle):LongWord;

Description: Get the current count of an existing Semaphore entry

Semaphore	Semaphore to get count for
Return	Current count or INVALID_HANDLE_VALUE on error

function SemaphoreWait(Semaphore:TSemaphoreHandle):LongWord;

Description: Wait on an existing Semaphore entry

Semaphore	Semaphore to wait on
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Semaphore count is greater than zero it will be decremented and this function will return immediately. If the Semaphore count is zero the current thread will be put on a wait queue until the Semaphore is signalled by another thread calling SemaphoreSignal() or SemaphoreSignalEx().

function SemaphoreWaitEx(Semaphore:TSemaphoreHandle; Timeout:LongWord):LongWord;

Description: Wait on an existing Semaphore entry

Semaphore	Semaphore to wait on
Timeout	Milliseconds to wait before timeout (0 equals do not wait, INFINITE equals wait forever)
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Semaphore count is greater than zero it will be decremented and this function will return immediately. If the Semaphore count is zero the current thread will be put on a wait queue until the Semaphore is signalled by another thread calling SemaphoreSignal() or SemaphoreSignalEx().

function SemaphoreSignal(Semaphore:TSemaphoreHandle):LongWord;

Description: Signal an existing Semaphore entry

Semaphore	Semaphore to signal
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If any threads are waiting on the Semaphore then one thread will be woken up and placed on the ready queue. If no threads are wait then the Semaphore count will be incremented.

function SemaphoreSignalEx(Semaphore:TSemaphoreHandle; Count:LongWord; Previous:PLongWord):LongWord;

Description: Signal an existing Semaphore entry one or more times

Semaphore	Semaphore to signal
Count	The number is times to signal the Semaphore, must be greater than zero
Previous	A pointer to a value that receives the previous count of the Semaphore. Can be nil if the previous count is not required
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If any threads are waiting on the Semaphore then one thread will be woken up and placed on the ready queue for each interation of the count passed. If no threads are wait then the Semaphore count will be incremented once for each interation of the count passed.

Synchronizer functions

function SynchronizerCreate:TSynchronizerHandle;

Description: Create and insert a new Synchronizer entry

Return	Handle of new Synchronizer entry or INVALID_HANDLE_VALUE if entry could not be created

function SynchronizerCreateEx(InitialReader,InitialWriter:Boolean):TSynchronizerHandle;

Description: Create and insert a new Synchronizer entry

InitialReader	If true set the state of the synchronizer to locked and the reader count to 1
InitialWriter	If true set the state of the synchronizer to locked and the writer owner to the current thread
Return	Handle of new Synchronizer entry or INVALID_HANDLE_VALUE if entry could not be created

function SynchronizerDestroy(Synchronizer:TSynchronizerHandle):LongWord;

Description: Destroy and remove an existing Synchronizer entry

Synchronizer	Handle of Synchronizer entry to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function SynchronizerReaderCount(Synchronizer:TSynchronizerHandle):LongWord;

Description: Get the current reader count of an existing Synchronizer entry

Synchronizer	Synchronizer to get count for
Return	Current reader count or INVALID_HANDLE_VALUE on error

function SynchronizerReaderLast(Synchronizer:TSynchronizerHandle):TThreadHandle;

Description: Get the last reader thread of an existing Synchronizer entry

Synchronizer	Synchronizer to last reader for
Return	Last reader thread or INVALID_HANDLE_VALUE on error

function SynchronizerReaderLock(Synchronizer:TSynchronizerHandle):LongWord;

Description: Lock an existing Synchronizer entry for reading

Synchronizer	Synchronizer to lock
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Synchronizer is not locked then lock it and set the reader count to one. If the Synchronizer is already locked for reading then increment the reader count and return immediately. If the Synchronizer is already locked for writing then wait until it is unlocked.

function SynchronizerReaderLockEx(Synchronizer:TSynchronizerHandle; Timeout:LongWord):LongWord;

Description: Lock an existing Synchronizer entry for reading

Synchronizer	Synchronizer to lock
Timeout	Milliseconds to wait before timeout (0 equals do not wait, INFINITE equals wait forever)
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Synchronizer is not locked then lock it and set the reader count to one. If the Synchronizer is already locked for reading then increment the reader count and return immediately. If the Synchronizer is already locked for writing then wait until it is unlocked.

function SynchronizerReaderUnlock(Synchronizer:TSynchronizerHandle):LongWord;

Description: Unlock an existing Synchronizer entry

Synchronizer	Synchronizer to unlock
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Synchronizer is locked for reading then decrement the count. If the count is greater than zero then return immediately. If the count reaches zero then unlock the Synchronizer and release the first writer thread waiting for it to be unlocked. If the Synchronizer is locked for writing then return an error. If the Synchronizer is not locked then return an error.

function SynchronizerReaderConvert(Synchronizer:TSynchronizerHandle):LongWord;

Description: Convert a reader lock on an existing Synchronizer entry to a writer lock

Synchronizer	Synchronizer to convert
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Synchronizer is locked for reading then decrement the count. If the count is greater than zero then wait to acquire the writer lock. If the count reaches zero then convert to writer lock with the current thread as the owner. If the Synchronizer is locked for writing then return an error. If the Synchronizer is not locked then return an error. Since reader locks are recursive but do not maintain reader thread ownership, caller must ensure that one and only one reader lock is held by the current thread.

function SynchronizerReaderConvertEx(Synchronizer:TSynchronizerHandle; Timeout:LongWord):LongWord;

Description: Convert a reader lock on an existing Synchronizer entry to a writer lock

Synchronizer	Synchronizer to convert
Timeout	Milliseconds to wait before timeout (0 equals do not wait, INFINITE equals wait forever)
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Synchronizer is locked for reading then decrement the count. If the count is greater than zero then wait to acquire the writer lock. If the count reaches zero then convert to writer lock with the current thread as the owner. If the Synchronizer is locked for writing then return an error. If the Synchronizer is not locked then return an error. Since reader locks are recursive but do not maintain reader thread ownership, caller must ensure that one and only one reader lock is held by the current thread.

function SynchronizerWriterCount(Synchronizer:TSynchronizerHandle):LongWord;

Description: Get the current writer count of an existing Synchronizer entry

Synchronizer	Synchronizer to get count for
Return	Current writer count or INVALID_HANDLE_VALUE on error

function SynchronizerWriterOwner(Synchronizer:TSynchronizerHandle):TThreadHandle;

Description: Get the current writer owner of an existing Synchronizer entry

Synchronizer	Synchronizer to get owner for
Return	Handle of owning thread or INVALID_HANDLE_VALUE if not currently owned

function SynchronizerWriterLock(Synchronizer:TSynchronizerHandle):LongWord;

Description: Lock an existing Synchronizer entry for writing

Synchronizer	Synchronizer to lock
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Synchronizer is not locked then lock it, set the writer count to one and mark the owner as the current thread. If the Synchronizer is already locked by the current thread then increment the writer count and return immediately. If the Synchronizer is already locked for reading then wait until it is unlocked.

function SynchronizerWriterLockEx(Synchronizer:TSynchronizerHandle; Timeout:LongWord):LongWord;

Description: Lock an existing Synchronizer entry for writing

Synchronizer	Synchronizer to lock
Timeout	Milliseconds to wait before timeout (0 equals do not wait, INFINITE equals wait forever)
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Synchronizer is not locked then lock it, set the writer count to one and mark the owner as the current thread. If the Synchronizer is already locked by the current thread then increment the writer count and return immediately. If the Synchronizer is already locked for reading then wait until it is unlocked.

function SynchronizerWriterUnlock(Synchronizer:TSynchronizerHandle):LongWord;

Description: Unlock an existing Synchronizer entry

Synchronizer	Synchronizer to unlock
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Synchronizer is locked for writing by the current thread then decrement the count. If the count is greater than zero then return immediately. If the count reaches zero then unlock the Synchronizer and release all reader threads waiting for it to be unlocked or the first writer thread waiting for it to be unlocked. If the Synchronizer is locked for reading then return an error. If the Synchronizer is locked for writing by another thread then return an error. If the Synchronizer is not locked then return an error.

function SynchronizerWriterConvert(Synchronizer:TSynchronizerHandle):LongWord;

Description: Convert a writer lock on an existing Synchronizer entry to a reader lock

Synchronizer	Synchronizer to convert
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If the Synchronizer is locked for writing by the current thread and the count is one then decrement the count. If the count is greater than one then return an error. If the count reaches zero then convert to reader lock and release all waiting reader threads. If the Synchronizer is locked for reading then return an error. If the Synchronizer is not locked then return an error. Since writer locks are recursive, caller must ensure that one and only one writer lock is held by the current thread.

List functions

function ListCreate:TListHandle; {$IFDEF LIST_INLINE}inline; {$ENDIF}

Description: Create and insert a new List entry

Return	Handle of new List entry or INVALID_HANDLE_VALUE if entry could not be created

function ListCreateEx(ListType:LongWord; Flags:LongWord):TListHandle;

Description: Create and insert a new List entry

ListType	Type of list to create (eg LIST_TYPE_WAIT_SEMAPHORE)
Flags	Flags for the new list (eg LIST_FLAG_IRQ)
Return	Handle of new List entry or INVALID_HANDLE_VALUE if entry could not be created

function ListDestroy(List:TListHandle):LongWord;

Description: Destroy and remove an existing List entry

List	Handle of List entry to destroy
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListCount(List:TListHandle):LongWord;

Description: Get the current count from the supplied list

List	Handle of List entry to get from
Return	List count on success or INVALID_HANDLE_VALUE on failure

function ListAddFirst(List:TListHandle; Element:PListElement):LongWord;

Description: Add the supplied element as the first item in the List

List	Handle of List entry to add to
Element	The list element to be added
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListAddLast(List:TListHandle; Element:PListElement):LongWord;

Description: Add the supplied element as the last item in the List

List	Handle of List entry to add to
Element	The list element to be added
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListGetThread(List:TListHandle; Thread:TThreadHandle):PListElement;

Description: Find the supplied thread in the List and return its element

List	Handle of List entry to find from
Thread	The thread handle to be found
Return	List element on success, nil on failure or list empty
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListGetFirst(List:TListHandle):PListElement;

Description: Get the first element from the List

List	Handle of List entry to get from
Return	List element on success, nil on failure or list empty
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListGetFirstEx(List:TListHandle; Remove:Boolean):PListElement;

Description: Get the first element from the List

List	Handle of List entry to get from
Remove	If true then remove the element from the list
Return	List element on success, nil on failure or list empty
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListGetLast(List:TListHandle):PListElement;

Description: Get the last element from the List

List	Handle of List entry to get from
Return	List element on success, nil on failure or list empty
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListGetLastEx(List:TListHandle; Remove:Boolean):PListElement;

Description: Get the last element from the List

List	Handle of List entry to get from
Remove	If true then remove the element from the list
Return	List element on success, nil on failure or list empty
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListInsert(List:TListHandle; Previous,Element:PListElement):LongWord;

Description: Insert a new element in the List

List	Handle of List entry to insert into
Previous	The element to insert the new element after
Element	The list element to be inserted
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListRemove(List:TListHandle; Element:PListElement):LongWord;

Description: Remove an element from the List

List	Handle of List entry to remove from
Element	The list element to be removed
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListIsEmpty(List:TListHandle):Boolean;

Description: Check if the supplied List is empty

List	Handle of List entry to check
Return	True if List is empty or does not exist, False if List is not empty
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListNotEmpty(List:TListHandle):Boolean;

Description: Check if the supplied List is empty

List	Handle of List entry to check
Return	True if List is not empty, False if List is empty or does not exist
Note	If list is part of a synchronisation object then caller must hold the lock on the object containing the list

function ListLock(List:TListHandle):LongWord;

Description: Lock the supplied List

List	Handle of List entry to lock
Return	ERROR_SUCCESS if completed or another error code on failure

function ListUnlock(List:TListHandle):LongWord;

Description: Unlock the supplied List

List	Handle of List entry to unlock
Return	ERROR_SUCCESS if completed or another error code on failure

function ListLock(List:TListHandle):LongWord; {$IFDEF LIST_INLINE}inline; {$ENDIF}

Description: Lock the supplied List

List	Handle of List entry to lock
Return	ERROR_SUCCESS if completed or another error code on failure

function ListUnlock(List:TListHandle):LongWord; {$IFDEF LIST_INLINE}inline; {$ENDIF}

Description: Unlock the supplied List

List	Handle of List entry to unlock
Return	ERROR_SUCCESS if completed or another error code on failure

Queue functions

function QueueCreate:TQueueHandle; {$IFDEF QUEUE_INLINE}inline; {$ENDIF}

Description: Create and insert a new Queue entry

Return	Handle of new Queue entry or INVALID_HANDLE_VALUE if entry could not be created

function QueueCreateEx(QueueType:LongWord; Flags:LongWord):TQueueHandle;

Description: Create and insert a new Queue entry}

'Queue'Type	Type of queue to create (eg QUEUE_TYPE_SCHEDULE_SLEEP)
Flags	Flags for the new queue (eg QUEUE_FLAG_DESCENDING)
Return	Handle of new Queue entry or INVALID_HANDLE_VALUE if entry could not be created

function QueueDestroy(Queue:TQueueHandle):LongWord;

Description: Destroy and remove an existing Queue entry

Queue	Handle of Queue entry to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function QueueCount(Queue:TQueueHandle):LongWord;

Description: Get the current count from the supplied queue

List	Handle of Queue entry to get from
Return	Queue count on success or INVALID_HANDLE_VALUE on failure

function QueueEnqueue(Queue:TQueueHandle; Thread:TThreadHandle):LongWord;

Description: Add the supplied thread as the last item in the Queue

Queue	Handle of Queue entry to add to
Thread	Handle of the Thread to enqueue
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If queue is a scheduler queue then caller must hold the lock on the thread

function QueueDequeue(Queue:TQueueHandle):TThreadHandle;

Description: Get and remove the first thread from the Queue

Queue	Handle of Queue entry to get from
Return	Handle of dequeued Thread or INVALID_HANDLE_VALUE on failure

function QueueFirstKey(Queue:TQueueHandle):Integer;

Description: Get the first Key value from the Queue

Queue	Handle of Queue entry to get from
Return	First Key value from queue or QUEUE_KEY_NONE on failure

function QueueLastKey(Queue:TQueueHandle):Integer;

Description: Get the last Key value from the Queue

Queue	Handle of Queue entry to get from
Return	Last Key value from queue or QUEUE_KEY_NONE on failure

function QueueInsertKey(Queue:TQueueHandle; Thread:TThreadHandle; Key:Integer):LongWord;

Description: Insert the supplied thread in the Queue ordered based on Key and the flags of the Queue

Queue	Handle of Queue entry to insert into
Thread	Handle of thread to be inserted
Key	The key to order the insertion on
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If queue is a scheduler queue then caller must hold the lock on the thread}

function QueueDeleteKey(Queue:TQueueHandle; Thread:TThreadHandle):LongWord;

Description: Delete the supplied thread from the Queue based on the flags of the Queue

Queue	Handle of Queue entry to delete from
Thread	Handle of thread to be deleted
Return	ERROR_SUCCESS if completed or another error code on failure
Note	If queue is a scheduler queue then caller must hold the lock on the thread

function QueueIncrementKey(Queue:TQueueHandle):Integer;

Description: Increment the first Key value in the Queue

Queue	Handle of Queue entry to increment in
Return	First Key value in queue after increment or QUEUE_KEY_NONE on failure

function QueueDecrementKey(Queue:TQueueHandle):Integer;

Description: Decrement the first Key value in the Queue

Queue	Handle of Queue entry to decrement in
Return	First Key value in queue after decrement or QUEUE_KEY_NONE on failure

function QueueIsEmpty(Queue:TQueueHandle):Boolean;

Description: Check if the supplied Queue is empty

Queue	Handle of Queue entry to check
Return	True if Queue is empty or does not exist, False if Queue is not empty

function QueueNotEmpty(Queue:TQueueHandle):Boolean;

Description: Check if the supplied Queue is not empty

Queue	Handle of Queue entry to check
Return	True if Queue is not empty, False if Queue is empty or does not exist

function QueueLock(Queue:TQueueHandle):LongWord; {$IFDEF QUEUE_INLINE}inline; {$ENDIF}

Description: Lock the supplied Queue

Queue	Handle of Queue entry to lock
Return	ERROR_SUCCESS if completed or another error code on failure

function QueueUnlock(Queue:TQueueHandle):LongWord; {$IFDEF QUEUE_INLINE}inline; {$ENDIF}

Description: Unlock the supplied Queue

Queue	Handle of Queue entry to unlock
Return	ERROR_SUCCESS if completed or another error code on failure

Thread functions

function ThreadCreate(StartProc:TThreadStart; StackSize,Priority:LongWord; Name:PChar; Parameter:Pointer):TThreadHandle;

Description: Create and insert a new Thread entry

StartProc	Procedure address where the thread will start running
StackSize	Stack size in bytes
Priority	Thread priority (eg THREAD_PRIORITY_NORMAL)
Name	To be documented
Parameter	Parameter passed to StartProc of new thread
Return	Handle of new thread or INVALID_HANDLE_VALUE if a new thread could not be created
Note	The new thread will be created suspended so it will not start running until it is scheduled with either ThreadReady or ThreadResume. Calls ThreadCreateEx with: Affinity = SCHEDULER_CPU_MASK (Run on any available CPU) CPU = SchedulerThreadNext (Assign to next CPU in round robin).
Warning	ThreadCreate and ThreadCreateEx are only used internally by SysBeginThread and SysBeginThreadEx. These functions do not handle setting up certain RTL functionality such as thread variables, exceptions and standard input/output handles. If you need to create a standard thread use either BeginThread (or BeginThreadEx) or use the TThread class and its descendants. Only use ThreadCreate and ThreadCreateEx if you need to modify the thread creation behaviour and understand that you also need to handle the additional RTL setup.

function ThreadCreateEx(StartProc:TThreadStart; StackSize,Priority,Affinity,CPU:LongWord; Name:PChar; Parameter:Pointer):TThreadHandle;

Description: Create and insert a new Thread entry

StartProc	Procedure address where the thread will start running
StackSize	Stack size in bytes
Priority	Thread priority (eg THREAD_PRIORITY_NORMAL)
Affinity	Thread affinity (eg CPU_AFFINITY_ALL)
CPU	The CPU to assign new thread to (eg )
Name	Name of the thread
Parameter	Parameter passed to StartProc of new thread
Return	Handle of new thread or INVALID_HANDLE_VALUE if a new thread could not be created
Note	The new thread will be created suspended so it will not start running until it is scheduled with either ThreadReady or ThreadResume.
Warning	ThreadCreate and ThreadCreateEx are only used internally by SysBeginThread and SysBeginThreadEx. These functions do not handle setting up certain RTL functionality such as thread variables, exceptions and standard input/output handles. If you need to create a standard thread use either BeginThread (or BeginThreadEx) or use the TThread class or its descendants. Only use ThreadCreate and ThreadCreateEx if you need to modify the thread creation behaviour and understand that you also need to handle the additional RTL setup

function ThreadDestroy(Thread:TThreadHandle):LongWord;

Description: Destroy and remove an existing Thread entry

Thread	Handle of thread to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadGetCurrent:TThreadHandle; inline;

Description: Get the Handle of currently executing thread

Return	Thread handle of the currently running thread

function ThreadSetCurrent(Thread:TThreadHandle):LongWord; inline;

Description: Set the Handle of currently executing thread

Return	ERROR_SUCCESS if completed or another error code on failure
Note	Must not be called except during initialization

function ThreadGetName(Thread:TThreadHandle):String;

Description: Get the name of a Thread}

Thread	Handle of thread to get
Return	Name of thread or empty string on failure

function ThreadSetName(Thread:TThreadHandle; const Name:String):LongWord;

Description: Set the name of a Thread

Thread	Handle of thread to set
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadGetCPU(Thread:TThreadHandle):LongWord;

Description: Get the current CPU of a thread (eg CPU_ID_0)

Thread	Handle of thread to get
Return	CPU of the thread or INVALID_HANDLE_VALUE on failure

function ThreadSetCPU(Thread:TThreadHandle; CPU:LongWord):LongWord;

Description: Set the current CPU of a thread (eg CPU_ID_0)

Thread	Handle of thread to set
CPU	New thread CPU (eg CPU_ID_0)
Return	Previous CPU of thread or INVALID_HANDLE_VALUE on failure
Note	The new CPU will not take affect until the thread is next rescheduled

function ThreadGetState(Thread:TThreadHandle):LongWord;

Description: Get the current state of a thread (eg THREAD_STATE_SUSPENDED)

Thread	Handle of thread to get
Return	State of the thread or INVALID_HANDLE_VALUE on failure

function ThreadGetLocale(Thread:TThreadHandle):LCID;

Description: Get the current locale of a thread

Thread	Handle of thread to get
Return	Locale of the thread or INVALID_HANDLE_VALUE on failure

function ThreadSetLocale(Thread:TThreadHandle; Locale:LCID):LongWord;

Description: Set the locale of a thread

Thread	Handle of thread to set
Locale	Locale Id to set
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadGetTimes(Thread:TThreadHandle; var CreateTime,ExitTime,KernelTime:Int64):LongWord;

Description: Get the current times of a thread

Thread	Handle of thread to get
CreateTime	Buffer to receive the CreateTime value
ExitTime	Buffer to receive the ExitTime value
KernelTime	Buffer to receive the KernelTime value
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadGetSwitchCount(Thread:TThreadHandle; var SwitchCount:Int64):LongWord;

Description: Get the current context switch count of a thread (How many times the thread has been scheduled)

Thread	Handle of thread to get
SwitchCount	Buffer to receive the SwitchCount value
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadGetStackFree:LongWord;

Description: Get the free stack size of the current thread

Return	Free stack size of the current thread or 0 on error
Note	No lock required as only ever called by the thread itself

function ThreadGetStackSize(Thread:TThreadHandle):LongWord;

Description: Get the current stack size of a thread

Thread	Handle of thread to get
Return	Stack size of the thread or INVALID_HANDLE_VALUE on failure

function ThreadGetStackBase(Thread:TThreadHandle):PtrUInt;

Description: Get the current stack base of a thread

Thread	Handle of thread to get
Return	Stack base of the thread or INVALID_HANDLE_VALUE on failure

function ThreadSetStackBase(Thread:TThreadHandle; StackBase:PtrUInt):LongWord;

Description: Set the current stack base of a thread

Thread	Handle of thread to set
StackBase	Stack base to set
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Must not be called except during initialization

function ThreadGetStackPointer(Thread:TThreadHandle):PtrUInt;

Description: Get the current stack pointer of a thread

Thread	Handle of thread to get
Return	Stack pointer of the thread or INVALID_HANDLE_VALUE on failure

function ThreadGetExitCode(Thread:TThreadHandle):LongWord;

Description: Get the exit code of a Thread

Thread	Handle of thread to get
Return	Exit code of thread, STILL_ACTIVE if the thread has not terminated or INVALID_HANDLE_VALUE on failure

function ThreadGetAffinity(Thread:TThreadHandle):LongWord;

Description: Get the scheduling affinity of a Thread

Thread	Handle of thread to get
Return	Affinity of thread or INVALID_HANDLE_VALUE on failure

function ThreadSetAffinity(Thread:TThreadHandle; Affinity:LongWord):LongWord;

Description: Set the scheduling affinity of a Thread

Thread	Handle of thread to set
Affinity	New thread affinity (eg CPU_AFFINITY_0)
Return	Previous affinity of thread or INVALID_HANDLE_VALUE on failure
Note	The new affinity will not take affect until the thread is next rescheduled

function ThreadGetPriority(Thread:TThreadHandle):LongWord;

Description: Get the scheduling priority of a Thread

Thread	Handle of thread to get
Return	Priority of thread or INVALID_HANDLE_VALUE on failure

function ThreadSetPriority(Thread:TThreadHandle; Priority:LongWord):LongWord;

Description: Set the scheduling priority of a Thread

Thread	Handle of thread to set
Priority	New thread priority (eg THREAD_PRIORITY_NORMAL)
Return	Previous priority of thread or INVALID_HANDLE_VALUE on failure
Note	The new priority will not take affect until the thread is next rescheduled

function ThreadGetLastError:LongWord;

Description: Get the last error value for the current Thread

Return	Last Error of thread or ERROR_SUCCESS if no error
Note	No lock required as only ever called by the thread itself

function ThreadSetLastError(LastError:LongWord):LongWord;

Description: Set the last error value for the current Thread

Return	ERROR_SUCCESS if completed or another error code on failure
Note	No lock required as only ever called by the thread itself

function ThreadGetWaitResult:LongWord;

Description: Get the result of the last wait timeout for the current Thread

Return	Result of last wait timeout or ERROR_SUCCESS if no error
Note	No lock required as only ever called by the thread itself

function ThreadGetReceiveResult:LongWord;

Description: Get the result of the last receive timeout for the current Thread

Return	Result of last receive timeout or ERROR_SUCCESS if no error
Note	No lock required as only ever called by the thread itself

function ThreadGetTlsIndex(TlsIndex:LongWord):LongWord;

Description: Get the current status of a TLS index in the TLS index table

TlsIndex	The TLS index to get the status for
Return	THREAD_TLS_FREE if unused, THREAD_TLS_USED if in use or THREAD_TLS_INVALID on error
Note	No lock required as only ever reads from the table

function ThreadAllocTlsIndex:LongWord;

Description: Allocate a TLS index in the TLS index table

Return	Allocated TLS index or TLS_OUT_OF_INDEXES on failure

function ThreadAllocTlsIndexEx(Flags:LongWord):LongWord;

Description: Allocate a TLS index in the TLS index table

Flags	The flags to apply to the TLS index entries (eg THREAD_TLS_FLAG_FREE)
Return	Allocated TLS index or TLS_OUT_OF_INDEXES on failure

function ThreadReleaseTlsIndex(TlsIndex:LongWord):LongWord;

Description: Deallocate a TLS index from the TLS index table

TlsIndex	The TLS index to deallocate
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadGetTlsValue(TlsIndex:LongWord):Pointer;

Description: Get the pointer associated with the TLS index for the current thread

Return	Pointer for the specified TLS index or nil if not set or on error
Note	No lock required as only ever called by the thread itself

function ThreadSetTlsValue(TlsIndex:LongWord; TlsValue:Pointer):LongWord;

Description: Set the pointer associated with the TLS index for the current thread

TlsIndex	The TLS index to get the pointer for
Return	ERROR_SUCCESS if completed or another error code on failure
Note	No lock required as only ever called by the thread itself

function ThreadGetTlsPointer(Thread:TThreadHandle):Pointer;

Description: Get the RTL TLS (Thread Local Storage) pointer of a Thread

Thread	Handle of thread to get
Return	Pointer to the RTL TLS of thread or nil on failure

function ThreadSetTlsPointer(Thread:TThreadHandle; TlsPointer:Pointer):LongWord;

Description: Set the RTL TLS (Thread Local Storage) pointer of a Thread

Thread	Handle of thread to set
TlsPointer	Pointer value to set (Can be nil to clear the pointer)
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadReady(Thread:TThreadHandle; Reschedule:Boolean):LongWord;

Description: Place the supplied Thread on the ready queue

Thread	Handle of thread to make ready
Reschedule	If True then call SchedulerReschedule
Return	ERROR_SUCCESS if completed or another error code on failure
Note	When called by the scheduler, thread has already been removed from the sleep queue

function ThreadTimeout(Thread:TThreadHandle):LongWord;

Description: Place the supplied Thread on the ready queue after a timeout waiting on a resource

Thread	Handle of thread to make ready
Return	ERROR_SUCCESS if completed or another error code on failure
Note	When called by the scheduler, thread has already been removed from the timeout queue

function ThreadWake(Thread:TThreadHandle):LongWord;

Description: Remove a thread prematurely from the sleep or timeout queues

Thread	Handle of thread to remove
Return	ERROR_SUCCESS if completed or another error code on failure
Note	A thread that was sleeping will simply return early. A thread that was waiting or receiving with a timeout will return with the error WAIT_TIMEOUT. A thread that was waiting or receiving with INFINITE timeout will return with the error WAIT_ABANDONED.

function ThreadMigrate(Thread:TThreadHandle; CPU:LongWord):LongWord;

Description: Migrate a thread to a new CPU

Thread	Handle of thread to migrate
CPU	New CPU for the thread
Return	Previous CPU of thread or INVALID_HANDLE_VALUE on failure

procedure ThreadEnd(ExitCode:LongWord);

Description: Terminate the current Thread

ExitCode	The return code of the thread

function ThreadHalt(ExitCode:LongWord):LongWord;

Description: Halt the current thread so it will never be rescheduled

ExitCode	The return code of the thread
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Normally only called due to an unhandled exception etc so that the thread is put to sleep permanently without being terminated

function ThreadTerminate(Thread:TThreadHandle; ExitCode:LongWord):LongWord;

Description: Terminate but do not destroy the supplied Thread

Thread	Handle of thread to terminate
ExitCode	The return code of the thread
Return	ERROR_SUCCESS if completed or another error code on failure
Note	The terminated thread is placed on the termination queue until any threads waiting on it have been released

function ThreadYield:LongWord;

Description: Make the current thread yield the processor (Same as ThreadSleep(0))

Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadSleep(Milliseconds:LongWord):LongWord;

Description: Place the current thread on the sleep queue for a specified number of milliseconds

Return	ERROR_SUCCESS if completed or another error code on failure
Note	Milliseconds: Number of milliseconds to sleep

function ThreadWait(List:TListHandle; Lock:TSpinHandle; Flags:LongWord):LongWord;

Description: Put the current thread into a wait state on the supplied list

List	Handle of List entry to put thread into
Lock	Handle of Lock to release before going into wait state
Flags	Flag to indicate which unlock method to use
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Caller must hold the lock on the synchronisation object containing the list

function ThreadWaitEx(List:TListHandle; Lock:TSpinHandle; Flags,Timeout:LongWord):LongWord;

Description: Put the current thread into a wait state with timeout on the supplied list

List	Handle of List entry to put thread into
Lock	Handle of Lock to release before going into wait state
Flags	Flag to indicate which unlock method to use
Timeout	Milliseconds to wait before timeout (INFINITE equals wait forever)
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Caller must hold the lock on the synchronisation object containing the list

function ThreadRelease(List:TListHandle):LongWord;

Description: Release the first thread waiting on the supplied list

List	Handle of List entry to release thread from
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Caller must hold the lock on the synchronisation object containing the list

function ThreadAbandon(List:TListHandle):LongWord;

Description: Release the first thread waiting on the supplied list and return with WAIT_ABANDONED

List	Handle of List entry to release thread from
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Caller must hold the lock on the synchronisation object containing the list

function ThreadWaitTerminate(Thread:TThreadHandle; Timeout:LongWord):LongWord;

Description: Make the current thread wait until the specified thread has terminated

Thread	Handle of the thread to wait on
Timeout	Milliseconds to wait before timeout (0 equals do not wait, INFINITE equals wait forever)
Return	ERROR_SUCCESS if completed or another error code on failure
Note	The wait can be abandoned by calling ThreadWake with the handle of the waiting thread

function ThreadSuspend(Thread:TThreadHandle):LongWord;

Description: Suspend a thread, placing it in hibernation

Thread	Handle of thread to suspend
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Suspending a thread from another thread is not safe unless specific precautions are taken to prevent deadlocks. It is normally safe for a thread to suspend itself as long as it releases any locks it is holding that may be required by other threads before suspending.

function ThreadResume(Thread:TThreadHandle):LongWord;

Description: Resume a suspended thread, making it ready

Thread	Handle of thread to resume
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadWaitMessage:LongWord;

Description: Make the current thread wait until a message is received (indefinately)

Return	ERROR_SUCCESS if completed or another error code on failure
Note	The received message is not removed from the message list

function ThreadSendMessage(Thread:TThreadHandle; const Message:TMessage):LongWord;

Description: Send a message to another thread

Thread	Handle of thread to send to
Message	Contents of message to send
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadReceiveMessage(var Message:TMessage):LongWord;

Description: Make the current thread wait to receive a message (indefinately)

Message	The received message if successful, undefined on error
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadReceiveMessageEx(var Message:TMessage; Timeout:LongWord; Remove:Boolean):LongWord;

Description: Make the current thread wait to receive a message

Message	The received message if successful, undefined on error
Timeout	Milliseconds to wait before timeout (0 equals do not wait, INFINITE equals wait forever)
Remove	If true then remove the received message from the message list
Return	ERROR_SUCCESS if completed or another error code on failure

function ThreadAbandonMessage(Thread:TThreadHandle):LongWord;

Description: Tell another thread to abandon waiting for a message

Thread	Handle of thread to abandon waiting
Return	ERROR_SUCCESS if completed or another error code on failure
Note	The waiting thread will return with ERROR_WAIT_ABANDONED or ERROR_WAIT_TIMEOUT

function ThreadLock(Thread:TThreadHandle):LongWord;

Description: Lock a thread allowing access to internal structures such as the thread stack

Thread	Handle of thread to lock
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Locking a thread will also disable IRQ or FIQ depending on scheduler settings. The lock should only be held for the briefest time possible.

function ThreadUnlock(Thread:TThreadHandle):LongWord;

Description: Unlock a thread that was locked by ThreadLock

Thread	Handle of thread to unlock
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Locking a thread will also disable IRQ or FIQ depending on scheduler settings. The lock should only be held for the briefest time possible.

Scheduler functions

function SchedulerCheck(CPUID:LongWord):LongWord;

Description: Check if the sleep queue is empty, if not then decrement the first key. Note: Then check if the timeout queue is empty, if not then decrement the first key. If either key reaches zero, return success to indicate there are threads to be woken or threads whose timeout has expired. Finally check if the termination queue is empty, if not then decrement the first key. Items will be removed from the termination queue by SchedulerReschedule.

CPUID	The ID of the current CPU
Return	ERROR_SUCCESS if either first key is zero, ERROR_NO_MORE_ITEMS if both queues are empty or another error code on failure
Note	Called by scheduler interrupt with IRQ or FIQ disabled and running on the IRQ or FIQ thread

function SchedulerWakeup(CPUID:LongWord):LongWord;

Description: Remove all threads from the sleep queue that have no more time to sleep. Note: Threads will be placed back on the ready queue for rescheduling.

CPUID	The ID of the current CPU
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Called by scheduler interrupt with IRQ or FIQ disabled and running on the IRQ or FIQ thread

function SchedulerExpire(CPUID:LongWord):LongWord;

Description: Remove all threads from the timeout queue that have no more time to wait. Note: Threads will be placed back on the ready queue for rescheduling but will return with an error indicating the timeout expired.

CPUID	The ID of the current CPU
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Called by scheduler interrupt with IRQ or FIQ disabled and running on the IRQ or FIQ thread

function SchedulerSwitch(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

Description: Perform a preemptive thread switch operation under an interrupt handler. Note: The next thread to run will be selected based on remaining quantum of the current thread, ready threads at higher priority levels and scheduler priority quantum for fair scheduling of lower priority threads.

CPUID	The ID of the current CPU
Thread	The handle of the currently running thread (Before IRQ or FIQ occurred)
Return	The handle of the current thread which may be the old thread or a new thread
Note	Called by scheduler interrupt with IRQ or FIQ disabled and running on the IRQ or FIQ thread

function SchedulerSelect(CPUID:LongWord; Thread:TThreadHandle; Yield:Boolean):TThreadHandle;

Description: Select the next thread to be run based on state, yield, quantum and priority

CPUID	The ID of the current CPU
Thread	The handle of the currently running thread (Before IRQ or FIQ occurred or when Reschedule was called)
Yield	True if the current thread is giving up its remaining time slice
Return	The handle of the next thread to run or INVALID_HANDLE_VALUE on no selection or error
Note	Called either by scheduler interrupt with IRQ or FIQ disabled and running on the IRQ or FIQ thread. Or by scheduler reschedule with IRQ or FIQ disabled and running on the current thread. Caller must either hold a lock on the current thread or have disabled IRQ or FIQ.

function SchedulerReschedule(Yield:Boolean):LongWord;

Description: Perform a thread switch operation when a thread yields, sleeps or waits. Note: The next thread to run will be selected based on whether the current thread is yielding or no longer ready, remaining quantum of the current thread, ready threads at higher priority levels and scheduler priority quantum for fair scheduling of lower priority threads.

Yield	True if the current thread is giving up its remaining time slice
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Called by the currently running thread to force a reschedule before sleeping, waiting etc

function SchedulerMigrationEnable:LongWord;

Description: Enable scheduler thread migration

Return	ERROR_SUCCESS if completed or another error code on failure

function SchedulerMigrationDisable:LongWord;

Description: Disable scheduler thread migration

Return	ERROR_SUCCESS if completed or another error code on failure

function SchedulerPreemptEnable(CPUID:LongWord):LongWord;

Description: Enable thread preemption for the specified CPU

CPUID	The ID of the CPU to enable for
Return	ERROR_SUCCESS if completed or another error code on failure

function SchedulerPreemptDisable(CPUID:LongWord):LongWord;

Description: Disable thread preemption for the specified CPU

CPUID	The ID of the CPU to disable for
Return	ERROR_SUCCESS if completed or another error code on failure

function SchedulerAllocationEnable(CPUID:LongWord):LongWord;

Description: Enable thread allocation for the specified CPU

CPUID	The ID of the CPU to enable for
Return	ERROR_SUCCESS if completed or another error code on failure

function SchedulerAllocationDisable(CPUID:LongWord):LongWord;

Description: Disable thread allocation for the specified CPU

CPUID	The ID of the CPU to disable for
Return	ERROR_SUCCESS if completed or another error code on failure

Messageslot functions

function MessageslotCreate:TMessageslotHandle;

Description: Create and insert a new Messageslot entry

Return	Handle of new Messageslot entry or INVALID_HANDLE_VALUE if entry could not be created

function MessageslotCreateEx(Maximum:LongWord; Flags:LongWord):TMessageslotHandle;

Description: Create and insert a new Messageslot entry

Maximum	Maximum number of messages allowed for the Messageslot (Must be greater than zero)
Flags	The flags for the Messageslot entry (eg MESSAGESLOT_FLAG_IRQ)
Return	Handle of new Messageslot entry or INVALID_HANDLE_VALUE if entry could not be created

function MessageslotDestroy(Messageslot:TMessageslotHandle):LongWord;

Description: Destroy and remove an existing Messageslot entry

Messageslot	Handle of Messageslot entry to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function MessageslotCount(Messageslot:TMessageslotHandle):LongWord;

Description: Get the number of available messages in a Messageslot entry

Messageslot	Messageslot to get from
Return	Number of messages or INVALID_HANDLE_VALUE on error

function MessageslotSend(Messageslot:TMessageslotHandle; const Message:TMessage):LongWord;

Description: Send a message to a Messageslot

Messageslot	Messageslot to send to
Message	Contents of message to send
Return	ERROR_SUCCESS if completed or another error code on failure

function MessageslotReceive(Messageslot:TMessageslotHandle; var Message:TMessage):LongWord;

Description: Receive a message from a Messageslot

Messageslot	Messageslot to receive from
Message	The received message if successful, undefined on error
Return	ERROR_SUCCESS if completed or another error code on failure

function MessageslotReceiveEx(Messageslot:TMessageslotHandle; var Message:TMessage; Timeout:LongWord):LongWord;

Description: Receive a message from a Messageslot

Messageslot	Messageslot to receive from
Message	The received message if successful, undefined on error
Timeout	Milliseconds to wait before timeout (0 equals do not wait, INFINITE equals wait forever)
Return	ERROR_SUCCESS if completed or another error code on failure

Mailslot functions

function MailslotCreate(Maximum:LongWord):TMailslotHandle;

Description: Create and insert a new Mailslot entry

Maximum	Maximum number of messages allowed for the Mailslot (Must be greater than zero)
Return	Handle of new Mailslot entry or INVALID_HANDLE_VALUE if entry could not be created

function MailslotDestroy(Mailslot:TMailslotHandle):LongWord;

Description: Destroy and remove an existing Mailslot entry

Mailslot	Handle of Mailslot entry to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function MailslotCount(Mailslot:TMailslotHandle):LongWord;

Description: Get the number of available messages in a Mailslot entry

Mailslot	Mailslot to get from
Return	Number of messages or INVALID_HANDLE_VALUE on error

function MailslotSend(Mailslot:TMailslotHandle; Data:Integer):LongWord;

Description: Send a message to a Mailslot

Mailslot	Mailslot to send to
Data	Message to send to mailslot
Return	ERROR_SUCCESS if completed or another error code on failure

function MailslotSendEx(Mailslot:TMailslotHandle; Data:Integer; Timeout:LongWord):LongWord;

Description: Send a message to a Mailslot

Mailslot	Mailslot to send to
Data	Message to send to mailslot
Timeout	Milliseconds to wait before timeout (0 equals do not wait, INFINITE equals wait forever)
Return	ERROR_SUCCESS if completed or another error code on failure

function MailslotReceive(Mailslot:TMailslotHandle):Integer;

Description: Receive a message from a Mailslot

Mailslot	Mailslot to receive from
Return	Received message or INVALID_HANDLE_VALUE on error

function MailslotReceiveEx(Mailslot:TMailslotHandle; Timeout:LongWord):Integer;

Description: Receive a message from a Mailslot

Timeout	Timeout = 0 then No Wait, Timeout = INFINITE then Wait forever

Buffer functions

function BufferCreate(Size,Count:LongWord):TBufferHandle;

Description: To be documented

Note	None documented

function BufferCreateEx(Size,Count,Flags:LongWord):TBufferHandle;

Description: To be documented

Note	None documented

function BufferDestroy(Buffer:TBufferHandle):LongWord;

Description: To be documented

Note	None documented

function BufferCount(Buffer:TBufferHandle):LongWord;

Description: To be documented

Note	None documented

function BufferAvailable(Buffer:TBufferHandle):LongWord;

Description: To be documented

Note	None documented

function BufferGet(Buffer:TBufferHandle):Pointer;

Description: To be documented

Note	None documented

function BufferGetEx(Buffer:TBufferHandle; Timeout:LongWord):Pointer;

Description: To be documented

Timeout	Timeout = 0 then No Wait, Timeout = INFINITE then Wait forever

function BufferFree(Buffer:Pointer):LongWord;

Description: To be documented

Note	None documented

function BufferIterate(Buffer:TBufferHandle; Previous:Pointer):Pointer;

Description: To be documented

Note	None documented

Event functions

function EventCreate(ManualReset,InitialState:Boolean):TEventHandle;

Description: To be documented

Note	None documented

function EventCreateEx(Flags:LongWord):TEventHandle;

Description: To be documented

Note	None documented

function EventDestroy(Event:TEventHandle):LongWord;

Description: To be documented

Note	None documented

function EventState(Event:TEventHandle):LongWord;

Description: To be documented

Note	None documented

function EventWait(Event:TEventHandle):LongWord;

Description: To be documented

Note	None documented

function EventWaitEx(Event:TEventHandle; Timeout:LongWord):LongWord;

Description: To be documented

Timeout	Timeout = 0 then no Wait, Timeout = INFINITE then Wait forever

function EventSet(Event:TEventHandle):LongWord;

Description: To be documented

Note	None documented

function EventReset(Event:TEventHandle):LongWord;

Description: To be documented

Note	None documented

function EventPulse(Event:TEventHandle):LongWord;

Description: To be documented

Note	None documented

Timer functions

function TimerCreate(Interval:LongWord; Enabled,Reschedule:Boolean; Event:TTimerEvent; Data:Pointer):TTimerHandle;

Description: To be documented

Note	None documented

function TimerCreateEx(Interval,State,Flags:LongWord; Event:TTimerEvent; Data:Pointer):TTimerHandle;

Description: To be documented

Note	None documented

function TimerDestroy(Timer:TTimerHandle):LongWord;

Description: To be documented

Note	None documented

function TimerEnable(Timer:TTimerHandle):LongWord;

Description: To be documented

Note	None documented

function TimerEnableEx(Timer:TTimerHandle; Interval:LongWord; Event:TTimerEvent; Data:Pointer):LongWord;

Description: To be documented

Note	None documented

function TimerDisable(Timer:TTimerHandle):LongWord;

Description: To be documented

Note	None documented

function TimerDequeue:TTimerHandle;

Description: To be documented

Note	None documented

function TimerFirstKey:Integer;

Description: To be documented

Note	None documented

function TimerInsertKey(Timer:TTimerHandle; Key:Integer):LongWord;

Description: To be documented

Note	None documented

function TimerDeleteKey(Timer:TTimerHandle):LongWord;

Description: To be documented

Note	None documented

function TimerDecrementKey:Integer;

Description: To be documented

Note	None documented

function TimerIsEmpty:Boolean;

Description: To be documented

Note	None documented

function TimerNotEmpty:Boolean;

Description: To be documented

Note	None documented

function TimerCheck:LongWord;

Description: To be documented

Note	None documented

function TimerTrigger:LongWord;

Description: To be documented

Note	None documented

Worker functions

function WorkerSchedule(Interval:LongWord; Task:TWorkerTask; Data:Pointer; Callback:TWorkerCallback):LongWord;

Description: To be documented

Note	None documented

function WorkerScheduleEx(Interval,Flags:LongWord; Task:TWorkerTask; Data:Pointer; Callback:TWorkerCallback):TWorkerHandle;

Description: To be documented

Note	None documented

function WorkerCancel(Worker:TWorkerHandle):LongWord;

Description: To be documented

Note	None documented

function WorkerScheduleIRQ(Affinity:LongWord; Task:TWorkerTask; Data:Pointer; Callback:TWorkerCallback):LongWord;

Description: To be documented

Note	None documented

function WorkerScheduleIRQEx(Affinity,Flags:LongWord; Task:TWorkerTask; Data:Pointer; Callback:TWorkerCallback):LongWord;

Description: To be documented

Note	None documented

function WorkerScheduleFIQ(Affinity:LongWord; Task:TWorkerTask; Data:Pointer; Callback:TWorkerCallback):LongWord;

Description: To be documented

Note	None documented

function WorkerScheduleFIQEx(Affinity,Flags:LongWord; Task:TWorkerTask; Data:Pointer; Callback:TWorkerCallback):LongWord;

Description: To be documented

Note	None documented

function WorkerIncrease(Count:LongWord):LongWord; inline;

Description: To be documented

Note	None documented

function WorkerIncreaseEx(Count:LongWord; Priority:Boolean):LongWord;

Description: To be documented

Note	None documented

function WorkerDecrease(Count:LongWord):LongWord; inline;

Description: To be documented

Note	None documented

function WorkerDecreaseEx(Count:LongWord; Priority:Boolean):LongWord;

Description: To be documented

Note	None documented

procedure WorkerTimer(WorkerRequest:PWorkerRequest);

Description: To be documented

Note	None documented

Tasker functions

function TaskerThreadSendMessage(Thread:TThreadHandle; const Message:TMessage):LongWord;

Description: Perform a ThreadSendMessage() function call using the tasker list

Note	None documented

function TaskerMessageslotSend(Messageslot:TMessageslotHandle; const Message:TMessage):LongWord;

Description: Perform a MessageslotSend() function call using the tasker list

Note	None documented

function TaskerSemaphoreSignal(Semaphore:TSemaphoreHandle; Count:LongWord):LongWord;

Description: Perform a SemaphoreSignal() function call using the tasker list

Note	None documented

function TaskerEnqueue(Task:PTaskerTask):LongWord;

Description: Add the supplied task to the end of the Tasker list

Return	ERROR_SUCCESS if completed or another error code on failure

function TaskerDequeue:PTaskerTask;

Description: Get and remove the first task from the Tasker list

Return	Dequeued Task or nil on failure (or list empty)

function TaskerCheck:LongWord;

Description: Check if the tasker list is empty or contains tasks

Return	ERROR_SUCCESS if the list contains tasks, ERROR_NO_MORE_ITEMS if list is empty or another error code on failure
Note	Called by clock interrupt with IRQ or FIQ disabled and running on the IRQ or FIQ thread

function TaskerTrigger:LongWord;

Description: Dequeue all tasks in the tasker list and perform the requested task for each

Return	ERROR_SUCCESS if completed or another error code on failure
Note	Called by clock interrupt with IRQ or FIQ disabled and running on the IRQ or FIQ thread

function TaskerGetCount:LongWord; inline;

Description: Get the current tasker count

Note	None documented

RTL initialize and exit functions

procedure SysInitProc;

Description: To be documented

Note	None documented

procedure SysExitProc;

Description: To be documented

Note	None documented

function SysInitCompleted:Boolean;

Description: To be documented

Note	None documented

RTL process functions

function SysGetProcessID:SizeUInt;

Description: To be documented

Note	None documented

RTL thread manager functions

function ThreadMain(Parameter:Pointer):PtrInt;

Description: To be documented

Note	None documented

function SysBeginThread(SignalAction:Pointer; StackSize:PtrUInt; ThreadFunction:TThreadFunc; ThreadParameter:Pointer; CreationFlags:DWORD; var ThreadId:TThreadID):TThreadID;

Description: To be documented

Note	None documented

function SysBeginThreadEx(SignalAction:Pointer; StackSize:PtrUInt; ThreadFunction:TThreadFunc; ThreadParameter:Pointer; CreationFlags:DWORD; Priority,Affinity,CPU:LongWord; Name:PChar; var ThreadId:TThreadID):TThreadID;

Description: To be documented

Note	None documented

procedure SysEndThread(ExitCode:DWORD);

Description: To be documented

Note	None documented

function SysSuspendThread(ThreadHandle:TThreadID):DWORD;

Description: To be documented

Note	None documented

function SysResumeThread(ThreadHandle:TThreadID):DWORD;

Description: To be documented

Note	None documented

function SysKillThread(ThreadHandle:TThreadID):DWORD;

Description: To be documented

Note	None documented

function SysCloseThread(ThreadHandle:TThreadID):DWORD;

Description: To be documented

Note	None documented

procedure SysThreadSwitch;

Description: To be documented

Note	None documented

function SysWaitForThreadTerminate(ThreadHandle:TThreadID; TimeoutMs:LongInt):DWORD;

Description: To be documented

Timeout	0=No Timeout

function SysThreadSetPriority(ThreadHandle:TThreadID; Priority:LongInt):Boolean;

Description: To be documented

Note	-15..+15, 0=Normal

function SysThreadGetPriority(ThreadHandle:TThreadID):LongInt;

Description: To be documented

Note	None documented

function SysGetCurrentThreadId:TThreadID;

Description: To be documented

Note	None documented

procedure SysInitCriticalSection(var CriticalSection);

Description: To be documented

Note	None documented

procedure SysDoneCriticalSection(var CriticalSection);

Description: To be documented

Note	None documented

procedure SysEnterCriticalSection(var CriticalSection);

Description: To be documented

Note	None documented

function SysTryEnterCriticalSection(var CriticalSection):LongInt;

Description: To be documented

Note	None documented

procedure SysLeaveCriticalSection(var CriticalSection);

Description: To be documented

Note	None documented

procedure SysInitThreadVar(var Offset:DWORD; Size:DWORD);

Description: To be documented

Note	None documented

function SysRelocateThreadVar(Offset:DWORD):Pointer;

Description: To be documented

Note	None documented

procedure SysAllocateThreadVars;

Description: To be documented

Note	None documented

procedure SysReleaseThreadVars;

Description: To be documented

Note	None documented

function SysBasicEventCreate(EventAttributes:Pointer; AManualReset,InitialState:Boolean; const Name:AnsiString):PEventState;

Description: To be documented

Note	None documented

procedure SysBasicEventDestroy(State:PEventState);

Description: To be documented

Note	None documented

procedure SysBasicEventResetEvent(State:PEventState);

Description: To be documented

Note	None documented

procedure SysBasicEventSetEvent(State:PEventState);

Description: To be documented

Note	None documented

function SysBasicEventWaitFor(Timeout:Cardinal; State:PEventState):LongInt;

Description: To be documented

Timeout	0=No Timeout

function SysRTLEventCreate:PRTLEvent;

Description: To be documented

Note	None documented

procedure SysRTLEventDestroy(AEvent:PRTLEvent);

Description: To be documented

Note	None documented

procedure SysRTLEventSetEvent(AEvent:PRTLEvent);

Description: To be documented

Note	None documented

procedure SysRTLEventResetEvent(AEvent:PRTLEvent);

Description: To be documented

Note	None documented

procedure SysRTLEventWaitFor(AEvent:PRTLEvent);

Description: To be documented

Note	None documented

procedure SysRTLEventWaitForTimeout(AEvent:PRTLEvent; Timeout:LongInt);

Description: To be documented

Timeout	0=No Timeout

function SysSemaphoreInit:Pointer;

Description: To be documented

Note	None documented

procedure SysSemaphoreDestroy(const Semaphore:Pointer);

Description: To be documented

Note	None documented

procedure SysSemaphorePost(const Semaphore:Pointer);

Description: To be documented

Note	None documented

procedure SysSemaphoreWait(const Semaphore:Pointer);

Description: To be documented

Note	None documented

Thread helper functions

function SpinGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function MutexGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function CriticalSectionGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function SemaphoreGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function SynchronizerGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function ListGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function QueueGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function ThreadGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function ThreadTlsGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function ThreadAllocateStack(StackSize:LongWord):Pointer;

Description: To be documented

Note	None documented

procedure ThreadReleaseStack(StackBase:Pointer; StackSize:LongWord);

Description: To be documented

Note	None documented

function ThreadSetupStack(StackBase:Pointer; StartProc:TThreadStart; ReturnProc:TThreadEnd; Parameter:Pointer):Pointer;

Description: To be documented

Note	None documented

function ThreadSnapshotCreate:PThreadSnapshot;

Description: To be documented

Note	None documented

function ThreadSnapshotDestroy(ASnapshot:PThreadSnapshot):LongWord;

Description: To be documented

Note	None documented

function MessageslotGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function MailslotGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function BufferGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function EventGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function TimerGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function WorkerGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function WorkerGetPriorityCount:LongWord; inline;

Description: To be documented

Note	None documented

function TaskerGetCount:LongWord; inline;

Description: To be documented

Note	None documented

function ListTypeToString(ListType:LongWord):String;

Description: To be documented

Note	None documented

function QueueTypeToString(QueueType:LongWord):String;

Description: To be documented

Note	None documented

function ThreadTypeToString(ThreadType:LongWord):String;

Description: To be documented

Note	None documented

function ThreadStateToString(ThreadState:LongWord):String;

Description: To be documented

Note	None documented

function ThreadPriorityToString(ThreadPriority:LongWord):String;

Description: To be documented

Note	None documented

procedure ThreadLog(Level:LongWord; const AText:String);

Description: To be documented

Note	None documented

procedure ThreadLogInfo(const AText:String);

Description: To be documented

Note	None documented

procedure ThreadLogError(const AText:String);

Description: To be documented

Note	None documented

procedure ThreadLogDebug(const AText:String);

Description: To be documented

Note	None documented

Scheduler helper functions

function SchedulerGetListFlags(ListType:LongWord):LongWord;

Description: To be documented

Note	None documented

function SchedulerGetQueueFlags(QueueType:LongWord):LongWord;

Description: To be documented

Note	None documented

function SchedulerGetQueueHandle(CPUID:LongWord; QueueType:LongWord):TQueueHandle;

Description: To be documented

Note	None documented

function SchedulerGetQueueHandleEx(CPUID:LongWord; Priority:LongWord):TQueueHandle;

Description: To be documented

Note	None documented

function SchedulerGetThreadCount(CPUID:LongWord):LongWord;

Description: To be documented

Note	None documented

function SchedulerGetThreadQuantum(CPUID:LongWord):LongWord;

Description: To be documented

Note	None documented

function SchedulerGetThreadHandle(CPUID:LongWord; ThreadType:LongWord):TThreadHandle;

Description: To be documented

Note	None documented

function SchedulerGetPriorityMask(CPUID:LongWord):LongWord;

Description: To be documented

Note	None documented

function SchedulerGetPriorityQuantum(Priority:LongWord):LongWord;

Description: To be documented

Note	None documented

function SchedulerSetPriorityQuantum(Priority,Quantum:LongWord):LongWord;

Description: To be documented

Note	None documented

function SchedulerGetMigrationQuantum:LongWord;

Description: To be documented

Note	None documented

function SchedulerGetStarvationQuantum(CPUID:LongWord):LongWord;

Description: To be documented

Note	None documented

function SchedulerGetThreadNext:LongWord;

Description: To be documented

Note	None documented

function SchedulerGetThreadMigration:LongWord;

Description: To be documented

Note	None documented

function SchedulerGetThreadPreempt(CPUID:LongWord):LongWord;

Description: To be documented

Note	None documented

function SchedulerGetThreadAllocation(CPUID:LongWord):LongWord;

Description: To be documented

Note	None documented

function SchedulerMigrationToString(Migration:LongWord):String;

Description: To be documented

Note	None documented

function SchedulerPreemptToString(Preempt:LongWord):String;

Description: To be documented

Note	None documented

function SchedulerAllocationToString(Allocation:LongWord):String;

Description: To be documented

Note	None documented

Timer helper functions

function TimerGetListFlags:LongWord;

Description: To be documented

Note	None documented

function TimerGetMessageslotFlags:LongWord;

Description: To be documented

Note	None documented

Worker helper functions

function WorkerGetMessageslotFlags:LongWord;

Description: To be documented

Note	None documented

Return to Unit Reference

Unit Threads

Contents

Description

Constants

Type definitions

Public variables

Function declarations

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools