Unit PlatformRPi3

Return to Unit Reference

Description

---

Ultibo Platform interface unit for Raspberry Pi 3

The RPi3 B has the Activity LED connected to the GPU, access is via a Virtual GPIO (Power LED appears to be unavailable).

Constants

---

[Expand]

RPi3 ARM physical to VC IO mapping RPI3_VCIO_*

RPI3_VCIO_ALIAS = BCM2837_VCIO_ALIAS;

The VCIO Alias (For ARM Physcial to VC IO translation)

[Expand]

RPi3 ARM physical to VC bus mapping RPI3_VCBUS_*

RPI3_VCBUS_ALIAS = BCM2837_VCBUS_C_ALIAS;

The currently selected VCBUS Alias (For ARM Physcial to VC Bus translation)

[Expand]

RPi3 secure world boot RPI3_SECURE_*

RPI3_SECURE_BOOT = $00000001;

If 1 then startup will attempt to switch back to secure world during boot process

[Expand]

RPi3 address of StartupHandler on reset RPI3_STARTUP_*

RPI3_STARTUP_ADDRESS = $00008000;

[Expand]

RPi3 page table address and size RPI3_PAGE_TABLE_*

RPI3_PAGE_TABLE_BASE = $00004000;	Place the first level Page Table after the interrupt vectors at 0x00001000 and before the code start at 0x00008000
RPI3_PAGE_TABLE_SIZE = SIZE_16K;	ARM Cortex A7 first level Page Table is exactly 16KB in size (4096 32 bit (4 byte) entries)

[Expand]

RPi3 vector table address and size RPI3_VECTOR_TABLE_*

RPI3_VECTOR_TABLE_BASE = $00001000;	Place the Interrupt Vector Table at 0x00001000 before the code start at 0x00008000
RPI3_VECTOR_TABLE_SIZE = SIZE_64;	The Interrupt Vector Table is exactly 64 bytes (16 32 bit (4 byte) entries)
RPI3_VECTOR_TABLE_COUNT = 8;	The Interrupt Vector Table contains 8 entries on an ARMv7 device

[Expand]

RPi3 CPU count RPI3_CPU_*

RPI3_CPU_COUNT = BCM2837_CPU_COUNT;
RPI3_CPU_BOOT = CPU_ID_0;
RPI3_CPU_MASK = CPU_AFFINITY_0 or CPU_AFFINITY_1 or CPU_AFFINITY_2 or CPU_AFFINITY_3;

[Expand]

RPi3 IRQ/FIQ start/routing RPI3_IRQ_*, RPI3_FIQ_*

RPI3_IRQ_START = 0;	System wide IRQs start at zero
RPI3_IRQ_ROUTING = CPU_ID_0;	Route system wide IRQs to CPU0
RPI3_FIQ_ROUTING = CPU_ID_0;	Route system wide FIQs to CPU0
RPI3_IRQ_LOCAL_START = BCM2837_GPU_IRQ_COUNT + BCM2837_ARM_IRQ_COUNT;	Local IRQs start after GPU and ARM IRQs

[Expand]

RPi3 SWI RPI3_SWI_*

RPI3_SWI_COUNT = 256;

Number of available SWI entries

[Expand]

RPi3 core timer prescaler RPI3_*_TIMER_*

RPI3_CORE_TIMER_PRESCALER = $06AAAAAB;	Divide the Crystal Clock by 19.2 to give a 1MHz Core Timer
RPI3_CORE_TIMER_FREQUENCY = 1000000;	The Core Timer frequency from the prescaler setting above
RPI3_GENERIC_TIMER_FREQUENCY = 1000000;	The ARM Generic Timer frequency from the prescaler setting above

[Expand]

RPi3 kernel image name RPI3_KERNEL_*

RPI3_KERNEL_NAME = 'kernel7.img';
RPI3_KERNEL_NAME = 'kernel8.img';
RPI3_KERNEL_CONFIG = 'config.txt';
RPI3_KERNEL_COMMAND = 'cmdline.txt';

[Expand]

RPi3 mailbox RPI3_MAILBOX_*

RPI3_MAILBOX_TIMEOUT = 100;	Default timeout to wait for mailbox calls to complete (Milliseconds)
RPI3_MAILBOX_TIMEOUT_EX = 1000;	Extended timeout to wait for mailbox calls to complete (Milliseconds)

[Expand]

RPi3 local mailbox RPI3_LOCAL_MAILBOX_*

RPI3_LOCAL_MAILBOX_TIMEOUT = 100;

Default timeout to wait for local mailbox calls to complete (Milliseconds)

Type definitions

---

None defined

Public variables

---

RPi3 specific Ultibo variables

RPi3Initialized:Boolean;

RPi3CNTVOFFLow:LongWord = 0;

The low 32 bits of the Virtual Counter Offset register at boot time (CPU0 only) (Set by Startup). Must be initialized to remain in .data or else rewritten to zero with .bss

RPi3CNTVOFFHigh:LongWord = 0;

The high 32 bits of the Virtual Counter Offset register at boot time (CPU0 only) (Set by Startup). Must be initialized to remain in .data or else rewritten to zero with .bss

Timer variables

TimerRegisters:PBCM2837SystemTimerRegisters;

Mailbox variables

Mailbox0Registers:PBCM2837Mailbox0Registers;

Interrupt variables

InterruptRegisters:PBCM2837InterruptRegisters;

InterruptEntries:array[0..(BCM2837_GPU_IRQ_COUNT + BCM2837_ARM_IRQ_COUNT - 1)] of TInterruptEntry;

LocalInterruptEntries:array[RPI3_IRQ_LOCAL_START..(BCM2837_IRQ_COUNT - 1),0..(RPI3_CPU_COUNT - 1)] of TInterruptEntry;

System call variables

SystemCallEntries:array[0..RPI3_SWI_COUNT - 1] of TSystemCallEntry;

IRQ/FIQ variables

IRQEnabled:array[0..2] of LongWord;

3 groups of IRQs to Enable/Disable (See: TBCM2837InterruptRegisters)

FIQEnabled:LongWord;

The single IRQ number to Enable as FIQ instead (See: TBCM2837InterruptRegisters)

IRQLocalEnabled:array[0..(RPI3_CPU_COUNT - 1)] of LongWord;

1 group of local IRQs to Enable/Disable per CPU (See: TBCM2837ARMLocalRegisters)

FIQLocalEnabled:array[0..(RPI3_CPU_COUNT - 1)] of LongWord;

1 group of local FIQs to Enable/Disable per CPU (See: TBCM2837ARMLocalRegisters)

Watchdog variables

WatchdogRegisters:PBCM2837PMWatchdogRegisters;

ARM local variables

ARMLocalRegisters:PBCM2837ARMLocalRegisters;

Virtual GPIO variables

VirtualGPIOBuffer:TBCM2837VirtualGPIOBuffer;

Function declarations

---

Initialization functions

[Expand]

procedure RPi3Init;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3SecondarySwitch; assembler; nostackframe;

Description: Secondary CPU switch from HYP mode handler

Note	None documented

[Expand]

procedure RPi3SecondarySecure; assembler; nostackframe;

Description: Secondary CPU switch to secure mode handler

Note	None documented

[Expand]

procedure RPi3SecondaryHandler; assembler; nostackframe;

Description: Secondary CPU startup handler routine

Note	None documented

RPi3 platform functions

[Expand]

procedure RPi3SMPInit;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3BoardInit;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3MemoryInit;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3ClockInit;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3PowerInit;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3MailboxInit;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3InterruptInit;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3PeripheralInit;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3FramebufferInit;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3PageTableInit;

Description: Initialize the Hardware Page Tables before enabling the MMU

Note	None documented

[Expand]

procedure RPi3PowerLEDEnable;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3PowerLEDOn;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3PowerLEDOff;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3ActivityLEDEnable;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3ActivityLEDOn;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3ActivityLEDOff;

Description: To be documented

Note	None documented

[Expand]

function RPi3MailboxReceive(Mailbox,Channel:LongWord):LongWord;

Description: Receive from specified mailbox on specified channel

Note	Data = first 28 bits, Channel = last 4 bits

[Expand]

procedure RPi3MailboxSend(Mailbox,Channel,Data:LongWord);

Description: Send to specified mailbox on specified channel

Note	Data = first 28 bits, Channel = last 4 bits

[Expand]

function RPi3MailboxCall(Mailbox,Channel,Data:LongWord; var Response:LongWord):LongWord;

Description: Perform a transaction (Send/Receive) to specified mailbox on specified channel

Note	Data = first 28 bits, Channel = last 4 bits Data pointer must be 16 byte aligned to allow for the 4 bit channel number

[Expand]

function RPi3MailboxCallEx(Mailbox,Channel,Data:LongWord; var Response:LongWord; Timeout:LongWord):LongWord;

Description: Perform a transaction (Send/Receive) to specified mailbox on specified channel

Note	Data = first 28 bits, Channel = last 4 bits Data pointer must be 16 byte aligned to allow for the 4 bit channel number

[Expand]

function RPi3MailboxPropertyCall(Mailbox,Channel:LongWord; Data:Pointer; var Response:LongWord):LongWord;

Description: Perform a property tag transaction (Send/Receive) to specified mailbox on specified channel

Note	Data = first 28 bits, Channel = last 4 bits Data pointer must be 16 byte aligned to allow for the 4 bit channel number

[Expand]

function RPi3MailboxPropertyCallEx(Mailbox,Channel:LongWord; Data:Pointer; var Response:LongWord; Timeout:LongWord):LongWord;

Description: Perform a property tag transaction (Send/Receive) to specified mailbox on specified channel

Note	Data = first 28 bits, Channel = last 4 bits Data pointer must be 16 byte aligned to allow for the 4 bit channel number

[Expand]

function RPi3RequestExIRQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;

Description: Request registration of the supplied handler to the specified IRQ number

CPUID	CPU to route IRQ to
Number	IRQ number to register
Handler	Interrupt handler function to register
HandlerEx	Extended Interrupt handler function to register
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function RPi3ReleaseExIRQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;

Description: Request deregistration of the supplied handler from the specified IRQ number

CPUID	CPU to route IRQ to
Number	IRQ number to deregister
Handler	Interrupt handler function to deregister
HandlerEx	Extended Interrupt handler function to deregister
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function RPi3RequestExFIQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;

Description: Request registration of the supplied handler to the specified FIQ number

CPUID	CPU to route FIQ to
Number	FIQ number to register
Handler	Interrupt handler function to register
HandlerEx	Extended Interrupt handler function to register
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function RPi3ReleaseExFIQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;

Description: Request deregistration of the supplied handler from the specified FIQ number

CPUID	CPU to route FIQ to
Number	FIQ number to deregister
Handler	Interrupt handler function to deregister
HandlerEx	Extended Interrupt handler function to deregister
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function RPi3RegisterSystemCallEx(CPUID,Number:LongWord; Handler:TSystemCallHandler; HandlerEx:TSystemCallExHandler):LongWord;

Description: Request registration of the supplied extended handler to the specified System Call number

CPUID	The CPU ID to register the System Call against (or CPU_ID_ALL)
Number	The System Call number to be registered
Handler	The handler function to be registered
HandlerEx	The extended handler function to be registered
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function RPi3DeregisterSystemCallEx(CPUID,Number:LongWord; Handler:TSystemCallHandler; HandlerEx:TSystemCallExHandler):LongWord;

Description: Request deregistration of the supplied extended handler from the specified System Call number

CPUID	The CPU ID to deregister the System Call from (or CPU_ID_ALL)
Number	The System Call number to be deregistered
Handler	The handler function to be deregistered
HandlerEx	The extended handler function to be deregistered
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function RPi3GetInterruptEntry(Number:LongWord):TInterruptEntry;

Description: Get the interrupt entry for the specified interrupt number

Note	None documented

[Expand]

function RPi3GetLocalInterruptEntry(CPUID,Number:LongWord):TInterruptEntry;

Description: Get the local interrupt entry for the specified interrupt number

Note	None documented

[Expand]

function RPi3GetSystemCallEntry(Number:LongWord):TSystemCallEntry;

Description: Get the system call entry for the specified system call number

Note	None documented

[Expand]

function RPi3SystemRestart(Delay:LongWord):LongWord;

Description: To be documented

Note	None documented

[Expand]

function RPi3SystemShutdown(Delay:LongWord):LongWord;

Description: To be documented

Note	None documented

[Expand]

function RPi3SystemGetCommandLine:String;

Description: Get the Command Line from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3CPUGetMemory(var Address:PtrUInt; var Length:LongWord):LongWord;

Description: Get the CPU Memory from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3GPUGetState:LongWord;

Description: To be documented

Note	None documented

[Expand]

function RPi3GPUGetMemory(var Address:PtrUInt; var Length:LongWord):LongWord;

Description: Get the GPU Memory from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3BoardGetModel:LongWord;

Description: Get the Board Model from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3BoardGetSerial:Int64;

Description: Get the Board Serial from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3BoardGetRevision:LongWord;

Description: Get the Board Revision from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3BoardGetMACAddress:String;

Description: Get the Board MAC Address from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FirmwareGetRevision:LongWord;

Description: Get the Firmware Revision from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3PowerGetWait(PowerId:LongWord):LongWord;

Description: Get the Power Wait from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3PowerGetState(PowerId:LongWord):LongWord;

Description: Get the Power State from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3PowerSetState(PowerId,State:LongWord; Wait:Boolean):LongWord;

Description: Set the Power State in the Mailbox property tags channel

Note	Power Lock not required due to Mailbox Property Call serialization

[Expand]

function RPi3ClockGetCount:LongWord;

Description: Gets the current system clock count (32 least significant bits of total)

Note	On the Raspberry Pi this comes from the System Timer free running counter which runs at 1MHz and therefore overflows every 4295 seconds

[Expand]

function RPi3ClockGetTotal:Int64;

Description: Gets the total system clock count

Note	On the Raspberry Pi this comes from the System Timer free running counter which runs at 1MHz, the clock interrupt also uses this timer to increment the clock every second and therefore keep time.

[Expand]

function RPi3ClockGetRate(ClockId:LongWord):LongWord;

Description: Get the Clock Rate from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3ClockSetRate(ClockId,Rate:LongWord; Turbo:Boolean):LongWord;

Description: Set the Clock Rate in the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3ClockGetState(ClockId:LongWord):LongWord;

Description: Get the Clock State from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3ClockSetState(ClockId,State:LongWord):LongWord;

Description: Set the Clock State in the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3ClockGetMinRate(ClockId:LongWord):LongWord;

Description: Get the Clock Min Rate from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3ClockGetMaxRate(ClockId:LongWord):LongWord;

Description: Get the Clock Max Rate from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3TurboGetState(TurboId:LongWord):LongWord;

Description: Get the Turbo State from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3TurboSetState(TurboId,State:LongWord):LongWord;

Description: Set the Turbo State in the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3VoltageGetValue(VoltageId:LongWord):LongWord;

Description: Get the Voltage Value from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3VoltageSetValue(VoltageId,Value:LongWord):LongWord;

Description: Set the Voltage Value in the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3VoltageGetMinValue(VoltageId:LongWord):LongWord;

Description: Get the Voltage Min Value from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3VoltageGetMaxValue(VoltageId:LongWord):LongWord;

Description: Get the Voltage Max Value from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3TemperatureGetCurrent(TemperatureId:LongWord):LongWord;

Description: Get the Temperature Current from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3TemperatureGetMaximum(TemperatureId:LongWord):LongWord;

Description: Get the Temperature Maximum Model from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3GPUMemoryAllocate(Length,Alignment,Flags:LongWord):THandle;

Description: Allocate GPU Memory from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3GPUMemoryRelease(Handle:THandle):LongWord;

Description: Release GPU Memory from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3GPUMemoryLock(Handle:THandle):LongWord;

Description: Lock GPU Memory from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3GPUMemoryUnlock(Handle:THandle):LongWord;

Description: Unlock GPU Memory from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3GPUExecuteCode(Address:Pointer; R0,R1,R2,R3,R4,R5:LongWord):LongWord;

Description: Execute GPU Code from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3DispmanxHandleGet(Resource:THandle):THandle;

Description: Get Dispmanx Memory Handle from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3EDIDBlockGet(Block:LongWord; Buffer:Pointer; Length:LongWord):LongWord;

Description: Get EDID Block from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferAllocate(Alignment:LongWord; var Address,Length:LongWord):LongWord;

Description: Allocate Framebuffer from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferRelease:LongWord;

Description: Release Framebuffer from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetState(State:LongWord):LongWord;

Description: Set Framebuffer State (Blank Screen) from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferGetDimensions(var Width,Height,Top,Bottom,Left,Right:LongWord):LongWord;

Description: Get Framebuffer Dimensions from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferGetPhysical(var Width,Height:LongWord):LongWord;

Description: Get Framebuffer Physical size from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetPhysical(var Width,Height:LongWord):LongWord;

Description: Set Framebuffer Physical size from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferTestPhysical(var Width,Height:LongWord):LongWord;

Description: Test Framebuffer Physical size from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferGetVirtual(var Width,Height:LongWord):LongWord;

Description: Get Framebuffer Virtual size from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetVirtual(var Width,Height:LongWord):LongWord;

Description: Set Framebuffer Virtual size from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferTestVirtual(var Width,Height:LongWord):LongWord;

Description: Test Framebuffer Virtual size from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferGetDepth(var Depth:LongWord):LongWord;

Description: Get Framebuffer Depth (Bits per pixel) from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetDepth(var Depth:LongWord):LongWord;

Description: Set Framebuffer Depth (Bits per pixel) from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferTestDepth(var Depth:LongWord):LongWord;

Description: Test Framebuffer Depth (Bits per pixel) from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferGetPixelOrder(var Order:LongWord):LongWord;

Description: Get Framebuffer Pixel Order (RGB) from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetPixelOrder(var Order:LongWord):LongWord;

Description: Set Framebuffer Pixel Order (RGB) from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferTestPixelOrder(var Order:LongWord):LongWord;

Description: Test Framebuffer Pixel Order (RGB) from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferGetAlphaMode(var Mode:LongWord):LongWord;

Description: Get Framebuffer Alpha Mode from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetAlphaMode(var Mode:LongWord):LongWord;

Description: Set Framebuffer Alpha Mode from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferTestAlphaMode(var Mode:LongWord):LongWord;

Description: Test Framebuffer Alpha Mode from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferGetPitch:LongWord;

Description: Get Framebuffer Pitch (Bytes per line) from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferGetOffset(var X,Y:LongWord):LongWord;

Description: Get Framebuffer Virtual Offset from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetOffset(var X,Y:LongWord):LongWord;

Description: Set Framebuffer Virtual Offset from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferTestOffset(var X,Y:LongWord):LongWord;

Description: Test Framebuffer Virtual Offset from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferGetOverscan(var Top,Bottom,Left,Right:LongWord):LongWord;

Description: Get Framebuffer Overscan from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetOverscan(var Top,Bottom,Left,Right:LongWord):LongWord;

Description: Set Framebuffer Overscan from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferTestOverscan(var Top,Bottom,Left,Right:LongWord):LongWord;

Description: Test Framebuffer Overscan from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferGetPalette(Buffer:Pointer; Length:LongWord):LongWord;

Description: Get Framebuffer Palette from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetPalette(Start,Count:LongWord; Buffer:Pointer; Length:LongWord):LongWord;

Description: Set Framebuffer Palette from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferTestPalette(Start,Count:LongWord; Buffer:Pointer; Length:LongWord):LongWord;

Description: Test Framebuffer Palette from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferTestVsync:LongWord;

Description: Test Framebuffer Vertical Sync from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetVsync:LongWord;

Description: Set Framebuffer Vertical Sync from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3FramebufferSetBacklight(Brightness:LongWord):LongWord;

Description: Set Framebuffer Backlight Brightness from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3TouchGetBuffer(var Address:LongWord):LongWord;

Description: Get the Touchscreen buffer from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3VirtualGPIOGetBuffer(var Address:LongWord):LongWord;

Description: Get the Virtual GPIO buffer from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3CursorSetDefault:LongWord;

Description: Set Cursor Default (Pixels) from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3CursorSetInfo(Width,Height,HotspotX,HotspotY:LongWord; Pixels:Pointer; Length:LongWord):LongWord;

Description: Set Cursor Info (Pixels) from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3CursorSetState(Enabled:Boolean; X,Y:LongWord; Relative:Boolean):LongWord;

Description: Set Cursor State (Enable, X, Y) from the Mailbox property tags channel

Relative	X, Y is relative to Display (Virtual) not Framebuffer (Physical)

[Expand]

function RPi3DMAGetChannels:LongWord;

Description: Get the available DMA Channels from the Mailbox property tags channel

Note	None documented

[Expand]

function RPi3VirtualGPIOInputGet(Pin:LongWord):LongWord;

Description: To be documented

Note	None documented

[Expand]

function RPi3VirtualGPIOOutputSet(Pin,Level:LongWord):LongWord;

Description: To be documented

Note	None documented

[Expand]

function RPi3VirtualGPIOFunctionSelect(Pin,Mode:LongWord):LongWord;

Description: To be documented

Note	None documented

RPi3 thread functions

[Expand]

procedure RPi3SchedulerInit;

Description: Initialize the scheduler interrupt on the boot CPU

Note	None documented

[Expand]

procedure RPi3SchedulerStart(CPUID:LongWord);

Description: Initialize the scheduler interrupt on the specified secondary CPU

Note	None documented

[Expand]

procedure RPi3SecondaryBoot(CPUID:LongWord);

Description: To be documented

Note	None documented

RPi3 IRQ functions

[Expand]

function RPi3DispatchIRQ(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

Description: Process any pending IRQ requests

Note	Called by ARMv8IRQHandler in PlatformARMv8 A DataMemoryBarrier is executed before and after calling this function

[Expand]

function RPi3HandleIRQ(Number,CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

Description: Call the handler function for an IRQ that was received, or halt if it doesn't exist

Note	None documented

RPi3 FIQ functions

[Expand]

function RPi3DispatchFIQ(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

Description: Process any pending FIQ requests

Note	Called by ARMv8FIQHandler in PlatformARMv8 A DataMemoryBarrier is executed before and after calling this function

[Expand]

function RPi3HandleFIQ(Number,CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

Description: Call the handler function for an FIQ that was received, or halt if it doesn't exist

Note	None documented

RPi3 SWI functions

[Expand]

function RPi3DispatchSWI(CPUID:LongWord; Thread:TThreadHandle; Request:PSystemCallRequest):TThreadHandle;

Description: Process an SWI request

Note	Called by ARMv8SoftwareInterruptHandler in PlatformARMv8 A DataMemoryBarrier is executed before and after calling this function

RPi3 clock functions

[Expand]

procedure RPi3ClockInterrupt(Parameter:Pointer);

Description: Interrupt handler function for the clock interrupt

Note	This schedules another clock interrupt to occur CLOCK_CYCLES_PER_TICK in the future, then updates ClockTicks and ClockSeconds and checks for timers to trigger.

[Expand]

procedure RPi3ClockUpdate(Cycles:LongWord; var Last:LongWord);

Description: Setup a clock interrupt to trigger after the specified number of clock cycles

Cycles	Number of cycles after which the timer interrupt is to be triggered
Note	This refers to native clock cycles as specified by CLOCK_FREQUENCY

RPi3 ccheduler functions

[Expand]

function RPi3SchedulerInterrupt(CPUID:LongWord; Thread:TThreadHandle; Parameter:Pointer):TThreadHandle;

Description: Interrupt handler function for the scheduler interrupt

Note	This schedules another scheduler interrupt to occur SCHEDULER_CLOCKS_PER_INTERRUPT in the future, then checks for threads to wakeup or timeout and the next thread to schedule.

[Expand]

procedure RPi3SchedulerUpdate(Cycles:LongWord; var Last:LongWord);

Description: Setup a scheduler interrupt to trigger after the specified number of clock cycles

Cycles	Number of cycles after which the scheduler interrupt is to be triggered
Note	This refers to native clock cycles as specified by RPI3_GENERIC_TIMER_FREQUENCY

[Expand]

procedure RPi3SchedulerSystemCall(Request:PSystemCallRequest);

Description: System Call handler for the scheduler

Note	This is registered to receive requests for the SYSTEM_CALL_CONTEXT_SWITCH and will perform a context switch from within an SWI

RPi3 framebuffer functions

[Expand]

function RPi3FramebufferDeviceAllocate(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;

Description: Allocate a framebuffer using the Mailbox Property Tags

Note	None documented

[Expand]

function RPi3FramebufferDeviceAllocateAlt(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;

Description: Allocate a framebuffer using a simple Mailbox Call

Note	None documented

[Expand]

function RPi3FramebufferDeviceRelease(Framebuffer:PFramebufferDevice):LongWord;

Description: To be documented

Note	None documented

[Expand]

function RPi3FramebufferDeviceBlank(Framebuffer:PFramebufferDevice; Blank:Boolean):LongWord;

Description: To be documented

Note	None documented

[Expand]

function RPi3FramebufferDeviceCommit(Framebuffer:PFramebufferDevice; Address,Size,Flags:LongWord):LongWord;

Description: To be documented

Note	None documented

[Expand]

function RPi3FramebufferDeviceSetBacklight(Framebuffer:PFramebufferDevice; Brightness:LongWord):LongWord;

Description: To be documented

Note	None documented

[Expand]

function RPi3FramebufferDeviceSetProperties(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;

Description: To be documented

Note	None documented

RPi3 helper functions

[Expand]

procedure RPi3Wait; assembler; nostackframe;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3LongWait; assembler; nostackframe;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3ShortWait; assembler; nostackframe;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3SlowBlink; assembler; nostackframe;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3FastBlink; assembler; nostackframe;

Description: To be documented

Note	None documented

[Expand]

procedure RPi3BootBlink; assembler; nostackframe;

Description: Blink the Activity LED without dependency on any other RTL setup

Note	None documented

[Expand]

function RPi3ConvertPowerIdRequest(PowerId:LongWord):LongWord;

Description: Convert Ultibo Power Id to BCM2837 Power Id

Note	None documented

[Expand]

function RPi3ConvertPowerStateRequest(PowerState:LongWord):LongWord;

Description: Convert Ultibo Power State to BCM2837 Power State

Note	None documented

[Expand]

function RPi3ConvertPowerStateResponse(PowerState:LongWord):LongWord;

Description: Convert BCM2837 Power State to Ultibo Power State

Note	None documented

[Expand]

function RPi3ConvertClockIdRequest(ClockId:LongWord):LongWord;

Description: Convert Ultibo Clock Id to BCM2837 Clock Id

Note	None documented

[Expand]

function RPi3ConvertClockStateRequest(ClockState:LongWord):LongWord;

Description: Convert Ultibo Clock State to BCM2837 Clock State

Note	None documented

[Expand]

function RPi3ConvertClockStateResponse(ClockState:LongWord):LongWord;

Description: Convert BCM2837 Clock State to Ultibo Clock State

Note	None documented

[Expand]

function RPi3ConvertVoltageIdRequest(VoltageId:LongWord):LongWord;

Description: Convert Ultibo Voltage Id to BCM2837 Voltage Id

Note	None documented

[Expand]

function RPi3ConvertTemperatureIdRequest(TemperatureId:LongWord):LongWord;

Description: Convert Ultibo Temperature Id to BCM2837 Temperature Id

Note	None documented

Return to Unit Reference