Unit PlatformQEMUVPB

Return to Unit Reference

Description

---

'Ultibo Platform interface unit for QEMU VersatilePB

To be documented

Constants

---

[Expand]

QEMUVPB specific constants QEMUVPB_*

QEMUVPB_STARTUP_ADDRESS = $00010000;

Address of StartupHandler on Reset

[Expand]

QEMUVPB page table constants QEMUVPB_PAGE_TABLE_*

QEMUVPB_PAGE_TABLE_BASE = $00004000;	Place the first level Page Table after the interrupt vectors at 0x00001000 and before the code start at 0x00010000
QEMUVPB_PAGE_TABLE_SIZE = SIZE_16K;	ARMv7 first level Page Table is exactly 16KB in size (4096 32 bit (4 byte) entries)

[Expand]

QEMUVPB vector table constants QEMUVPB_VECTOR_TABLE_*

QEMUVPB_VECTOR_TABLE_BASE = $00001000;	Place the Interrupt Vector Table at 0x00001000 before the code start at 0x00010000
QEMUVPB_VECTOR_TABLE_SIZE = SIZE_64;	The Interrupt Vector Table is exactly 64 bytes (16 32 bit (4 byte) entries)
QEMUVPB_VECTOR_TABLE_COUNT = 8;	The Interrupt Vector Table contains 8 entries on an ARMv7 device

[Expand]

QEMUVPB CPU count constants QEMUVPB_CPU_*

QEMUVPB_CPU_COUNT = VERSATILEPB_CPU_COUNT;
QEMUVPB_CPU_BOOT = CPU_ID_0;
QEMUVPB_CPU_MASK = CPU_AFFINITY_0;

[Expand]

QEMUVPB SWI constants QEMUVPB_SWI_*

QEMUVPB_SWI_COUNT = 256;

Number of available SWI entries

[Expand]

QEMUVPB kernel name constants QEMUVPB_KERNEL_*

QEMUVPB_KERNEL_NAME = 'kernel.bin';
QEMUVPB_KERNEL_NAME = 'kernel64.bin';
QEMUVPB_KERNEL_CONFIG = ;	Not available as a file
QEMUVPB_KERNEL_COMMAND = ;	Not available as a file

Type definitions

---

To be documented

Public variables

---

To be documented

Function declarations

---

Initialization functions

[Expand]

procedure QEMUVPBInit;

Description: To be documented

Note	None documented

QEMUVPB platform functions

[Expand]

procedure QEMUVPBBoardInit;

Description: To be documented

Note	None documented

[Expand]

procedure QEMUVPBMemoryInit;

Description: To be documented

Note	None documented

[Expand]

procedure QEMUVPBClockInit;

Description: To be documented

Note	None documented

[Expand]

procedure QEMUVPBPowerInit;

Description: To be documented

Note	None documented

[Expand]

procedure QEMUVPBInterruptInit;

Description: To be documented

Note	None documented

[Expand]

procedure QEMUVPBPeripheralInit;

Description: To be documented

Note	None documented

[Expand]

procedure QEMUVPBFramebufferInit;

Description: To be documented

Note	None documented

[Expand]

procedure QEMUVPBPageTableInit;

Description: Initialize the Hardware Page Tables before enabling the MMU

Note	See ??????

[Expand]

function QEMUVPBRequestExIRQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;

Description: Request registration of the supplied handler to the specified IRQ number

CPUID	CPU to route IRQ to
Number	IRQ number to register
Handler	Interrupt handler function to register
HandlerEx	Extended Interrupt handler function to register
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function QEMUVPBReleaseExIRQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;

Description: Request deregistration of the supplied handler from the specified IRQ number

CPUID	CPU to route IRQ to
Number	IRQ number to deregister
Handler	Interrupt handler function to deregister
HandlerEx	Extended Interrupt handler function to deregister
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function QEMUVPBRequestExFIQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;

Description: Request registration of the supplied handler to the specified FIQ number

CPUID	CPU to route FIQ to
Number	FIQ number to register
Handler	Interrupt handler function to register
HandlerEx	Extended Interrupt handler function to register
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function QEMUVPBReleaseExFIQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;

Description: Request deregistration of the supplied handler from the specified FIQ number

CPUID	CPU to route FIQ to
Number	FIQ number to deregister
Handler	Interrupt handler function to deregister
HandlerEx	Extended Interrupt handler function to deregister
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function QEMUVPBRegisterSystemCallEx(CPUID,Number:LongWord; Handler:TSystemCallHandler; HandlerEx:TSystemCallExHandler):LongWord;

Description: Request registration of the supplied extended handler to the specified System Call number

CPUID	The CPU ID to register the System Call against (Ignored on QEMUVPB)
Number	The System Call number to be registered
Handler	The handler function to be registered
HandlerEx	The extended handler function to be registered
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function QEMUVPBDeregisterSystemCallEx(CPUID,Number:LongWord; Handler:TSystemCallHandler; HandlerEx:TSystemCallExHandler):LongWord;

Description: Request deregistration of the supplied extended handler from the specified System Call number

CPUID	The CPU ID to deregister the System Call from (Ignored on QEMUVPB)
Number	The System Call number to be deregistered
Handler	The handler function to be deregistered
HandlerEx	The extended handler function to be deregistered
Note	Only one of Handler or HandlerEx can be specified

[Expand]

function QEMUVPBGetInterruptEntry(Number:LongWord):TInterruptEntry;

Description: To be documented

Note	Get the interrupt entry for the specified interrupt number

[Expand]

function QEMUVPBGetSystemCallEntry(Number:LongWord):TSystemCallEntry;

Description: Get the system call entry for the specified system call number

Note	None documented

[Expand]

function QEMUVPBSystemRestart(Delay:LongWord):LongWord;

Description: To be documented

Note	None documented

[Expand]

function QEMUVPBSystemShutdown(Delay:LongWord):LongWord;

Description: To be documented

Note	None documented

[Expand]

function QEMUVPBClockGetCount:LongWord;

Description: Gets the current system clock count (32 least significant bits of total)

Note	On the VersatilePB this comes from the 24MHz counter which will overflow every 178 seconds

[Expand]

function QEMUVPBClockGetTotal:Int64;

Description: Gets the total system clock count

Note	On the VersatilePB this comes from the 24MHz counter which will overflow every 178 seconds and increment the rollover value. This is only accurate if either ClockGetCount or ClockGetTotal is called at least once per 178 seconds on order to increment the rollover.

QEMUVPB thread functions

[Expand]

procedure QEMUVPBSchedulerInit;

Description: Initialize the scheduler interrupt on the boot CPU

Note	None documented

QEMUVPB IRQ functions

[Expand]

function QEMUVPBDispatchIRQ(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

Description: Process any pending IRQ requests

Note	Called by ARMv7/8IRQHandler in PlatformARMv7/8 A DataMemoryBarrier is executed before and after calling this function

[Expand]

function QEMUVPBHandleIRQ(Number,CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

Description: Call the handler function for an IRQ that was received, or halt if it doesn't exist

Note	None documented

QEMUVPB FIQ functions

[Expand]

function QEMUVPBDispatchFIQ(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

Description: Process any pending FIQ requests

Note	Called by ARMv7/8FIQHandler in PlatformARMv7/8 A DataMemoryBarrier is executed before and after calling this function

[Expand]

function QEMUVPBHandleFIQ(Number,CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;

Description: Call the handler function for an FIQ that was received, or halt if it doesn't exist

Note	None documented

QEMUVPB SWI functions

[Expand]

function QEMUVPBDispatchSWI(CPUID:LongWord; Thread:TThreadHandle; Request:PSystemCallRequest):TThreadHandle;

Description: Process an SWI request

Note	Called by ARMv7/8SoftwareInterruptHandler in PlatformARMv7/8 A DataMemoryBarrier is executed before and after calling this function

QEMUVPB clock functions

[Expand]

procedure QEMUVPBClockInterrupt(Parameter:Pointer);

Description: Interrupt handler function for the clock interrupt

Note	This schedules another clock interrupt to occur CLOCK_CYCLES_PER_TICK in the future, then updates ClockTicks and ClockSeconds and checks for timers to trigger.

[Expand]

procedure QEMUVPBClockUpdate(Cycles:LongWord; var Last:LongWord);

Description: Setup a clock interrupt to trigger after the specified number of clock cycles

Cycles	Number of cycles after which the timer interrupt is to be triggered
Note	This refers to native clock cycles as specified by CLOCK_FREQUENCY

QEMUVPB scheduler functions

[Expand]

function QEMUVPBSchedulerInterrupt(CPUID:LongWord; Thread:TThreadHandle; Parameter:Pointer):TThreadHandle;

Description: Interrupt handler function for the scheduler interrupt

Note	This schedules another scheduler interrupt to occur SCHEDULER_CLOCKS_PER_INTERRUPT in the future, then checks for threads to wakeup or timeout and the next thread to schedule.

[Expand]

procedure QEMUVPBSchedulerUpdate(Cycles:LongWord; var Last:LongWord);

Description: Setup a scheduler interrupt to trigger after the specified number of clock cycles

Cycles	Number of cycles after which the scheduler interrupt is to be triggered
Note	This refers to native clock cycles as specified by VERSATILEPB_TIMER_FREQUENCY

[Expand]

procedure QEMUVPBSchedulerSystemCall(Request:PSystemCallRequest);

Description: System Call handler for the scheduler

Note	This is registered to receive requests for the SYSTEM_CALL_CONTEXT_SWITCH and will perform a context switch from within an SWI

QEMUVPB framebuffer functions

[Expand]

function QEMUVPBFramebufferDeviceAllocate(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;

Description: Implementation of FramebufferDeviceAllocate API for PL110 Framebuffer

Note	Not intended to be called directly by applications, use FramebufferDeviceAllocate instead

[Expand]

function QEMUVPBFramebufferDeviceRelease(Framebuffer:PFramebufferDevice):LongWord;

Description: Implementation of FramebufferDeviceRelease API for PL110 Framebuffer

Note	Not intended to be called directly by applications, use FramebufferDeviceRelease instead

[Expand]

function QEMUVPBFramebufferDeviceBlank(Framebuffer:PFramebufferDevice; Blank:Boolean):LongWord;

Description: Implementation of FramebufferDevicBlank API for PL110 Framebuffer

Note	Not intended to be called directly by applications, use FramebufferDevicBlank instead

[Expand]

function QEMUVPBFramebufferDeviceCommit(Framebuffer:PFramebufferDevice; Address,Size,Flags:LongWord):LongWord;

Description: Implementation of FramebufferDeviceCommit API for PL110 Framebuffer

Note	Not intended to be called directly by applications, use FramebufferDeviceCommit instead

[Expand]

function QEMUVPBFramebufferDeviceSetProperties(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;

Description: Implementation of FramebufferDeviceSetProperties API for PL110 Framebuffer

Note	Not intended to be called directly by applications, use FramebufferDeviceSetProperties instead

QEMUVPB helper functions

[Expand]

procedure QEMUVPBBootBlink; assembler; nostackframe;

Description: Output characters to UART0 without dependency on any other RTL setup

Note	None documented

[Expand]

procedure QEMUVPBBootOutput(Value:LongWord);

Description: Output characters to UART0 without dependency on any other RTL setup

Note	Based on hexstrings() function by dwelch67 (https://github.com/dwelch67)

Return to Unit Reference