Return to Unit Reference
Description
Ultibo UART interface unit
UART (Universal Asynchronous Receiver Transmitter) devices represent the industry standard serial communications devices that are available on almost every system.
This unit implements the framework for UART devices and provides a standardized API to allow driver specific implementation to be abstracted. All UART devices are also represented as a serial device and this unit handles the relationship between the two devices.
Each UART device returns a set of properties that describe the capabilities of the device and includes a set of flags that indicate what features are supported.
Reads and writes to UART devices are unbuffered and simply pass raw data to and from the caller unless the serial interface is used instead which includes buffering of transmitted and received data. Both reads and writes allow for non blocking so that a caller can avoid waiting for received data to be available or the device to be ready to transmit.
Constants
[Expand]
UART specific constants UART_*
UART_NAME_PREFIX = 'UART';
|
Name prefix for UART Devices
|
[Expand]
UART device type constants UART_TYPE_*
UART_TYPE_NONE = 0;
|
|
UART_TYPE_8250 = 1;
|
8250 UART and similar variants (Differences are handled by driver)
|
UART_TYPE_16550 = 2;
|
16550 UART and similar variants (eg 16550A) (Differences are handled by driver)
|
UART_TYPE_16650 = 3;
|
16650 UART and similar variants (eg 16C650) (Differences are handled by driver)
|
[Expand]
UART device mode constants UART_MODE_*
UART_MODE_NONE = 0;
|
|
UART_MODE_UART = 1;
|
The UART was opened as a UART device and all reads and writes are direct
|
UART_MODE_SERIAL = 2;
|
The UART was opened as a Serial device so reads and writes are being buffered
|
[Expand]
UART device state constants UART_STATE_*
UART_STATE_DISABLED = 0;
|
|
UART_STATE_ENABLED = 1;
|
|
[Expand]
UART device flag constants UART_FLAG_*
UART_FLAG_NONE = SERIAL_FLAG_NONE;
|
|
UART_FLAG_DATA_8BIT = SERIAL_FLAG_DATA_8BIT;
|
Device supports 8 data bits
|
UART_FLAG_DATA_7BIT = SERIAL_FLAG_DATA_7BIT;
|
Device supports 7 data bits
|
UART_FLAG_DATA_6BIT = SERIAL_FLAG_DATA_6BIT;
|
Device supports 6 data bits
|
UART_FLAG_DATA_5BIT = SERIAL_FLAG_DATA_5BIT;
|
Device supports 5 data bits
|
UART_FLAG_STOP_1BIT = SERIAL_FLAG_STOP_1BIT;
|
Device supports 1 stop bit
|
UART_FLAG_STOP_2BIT = SERIAL_FLAG_STOP_2BIT;
|
Device supports 2 stop bits
|
UART_FLAG_STOP_1BIT5 = SERIAL_FLAG_STOP_1BIT5;
|
Device supports 1.5 stop bits
|
UART_FLAG_PARITY_ODD = SERIAL_FLAG_PARITY_ODD;
|
Device supports odd parity
|
UART_FLAG_PARITY_EVEN = SERIAL_FLAG_PARITY_EVEN;
|
Device supports even parity
|
UART_FLAG_PARITY_MARK = SERIAL_FLAG_PARITY_MARK;
|
Device supports mark parity
|
UART_FLAG_PARITY_SPACE = SERIAL_FLAG_PARITY_SPACE;
|
Device supports space parity
|
UART_FLAG_FLOW_RTS_CTS = SERIAL_FLAG_FLOW_RTS_CTS;
|
Device supports RTS/CTS flow control
|
UART_FLAG_FLOW_DSR_DTR = SERIAL_FLAG_FLOW_DSR_DTR;
|
Device supports DSR/DTR flow control
|
[Expand]
UART read flag constants UART_READ_*
UART_READ_NONE = SERIAL_READ_NONE;
|
|
UART_READ_NON_BLOCK = SERIAL_READ_NON_BLOCK;
|
Do not block when receiving, if the FIFO is empty return immediately
|
[Expand]
UART write flag constants UART_WRITE_*
UART_WRITE_NONE = SERIAL_WRITE_NONE;
|
|
UART_WRITE_NON_BLOCK = SERIAL_WRITE_NON_BLOCK;
|
Do not block when transmitting, if the FIFO is full return immediately
|
[Expand]
UART status flag constants UART_STATUS_*
UART_STATUS_NONE = SERIAL_STATUS_NONE;
|
|
UART_STATUS_RTS = SERIAL_STATUS_RTS;
|
|
UART_STATUS_CTS = SERIAL_STATUS_CTS;
|
|
UART_STATUS_DSR = SERIAL_STATUS_DSR;
|
|
UART_STATUS_DTR = SERIAL_STATUS_DTR;
|
|
UART_STATUS_RX_FULL = SERIAL_STATUS_RX_FULL;
|
|
UART_STATUS_RX_EMPTY = SERIAL_STATUS_RX_EMPTY;
|
|
UART_STATUS_TX_FULL = SERIAL_STATUS_TX_FULL;
|
|
UART_STATUS_TX_EMPTY = SERIAL_STATUS_TX_EMPTY;
|
|
UART_STATUS_BUSY = SERIAL_STATUS_BUSY;
|
|
UART_STATUS_BREAK_ERROR = SERIAL_STATUS_BREAK_ERROR;
|
|
UART_STATUS_PARITY_ERROR = SERIAL_STATUS_PARITY_ERROR;
|
|
UART_STATUS_FRAMING_ERROR = SERIAL_STATUS_FRAMING_ERROR;
|
|
UART_STATUS_OVERRUN_ERROR = SERIAL_STATUS_OVERRUN_ERROR;
|
|
UART_STATUS_DCD = SERIAL_STATUS_DCD;
|
|
UART_STATUS_RI = SERIAL_STATUS_RI;
|
|
[Expand]
UART logging constants UART_LOG_*
UART_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG;
|
UART debugging messages
|
UART_LOG_LEVEL_INFO = LOG_LEVEL_INFO;
|
UART informational messages, such as a device being attached or detached
|
UART_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR;
|
UART error messages
|
UART_LOG_LEVEL_NONE = LOG_LEVEL_NONE;
|
No UART messages
|
Type definitions
To be documented
Public variables
To be documented
Function declarations
Initialization functions
[Expand]
procedure UARTInit;
Description: Initialize the UART unit and UART device table
| Note
|
Called only during system startup
|
UART functions
[Expand]
function UARTDeviceOpen(UART:PUARTDevice; BaudRate,DataBits,StopBits,Parity,FlowControl:LongWord):LongWord;
Description: To be documented
[Expand]
function UARTDeviceClose(UART:PUARTDevice):LongWord;
Description: To be documented
[Expand]
function UARTDeviceRead(UART:PUARTDevice; Buffer:Pointer; Size,Flags:LongWord;var Count:LongWord):LongWord;
Description: To be documented
[Expand]
function UARTDeviceWrite(UART:PUARTDevice; Buffer:Pointer; Size,Flags:LongWord;var Count:LongWord):LongWord;
Description: To be documented
[Expand]
function UARTDeviceStatus(UART:PUARTDevice):LongWord;
Description: To be documented
[Expand]
function UARTDeviceProperties(UART:PUARTDevice; Properties:PUARTProperties):LongWord;
Description: To be documented
[Expand]
function UARTDeviceCreate:PUARTDevice;
Description: Create a new UART entry
| Return
|
Pointer to new UART entry or nil if UART could not be created
|
[Expand]
function UARTDeviceCreateEx(Size:LongWord):PUARTDevice;
Description: Create a new UART entry
| Size
|
Size in bytes to allocate for new UART (Including the UART entry)
|
| Return
|
Pointer to new UART entry or nil if UART could not be created
|
[Expand]
function UARTDeviceDestroy(UART:PUARTDevice):LongWord;
Description: Destroy an existing UART entry
[Expand]
function UARTDeviceRegister(UART:PUARTDevice):LongWord;
Description: Register a new UART in the UART table
[Expand]
function UARTDeviceDeregister(UART:PUARTDevice):LongWord;
Description: Deregister a UART from the UART table
[Expand]
function UARTDeviceFind(UARTId:LongWord):PUARTDevice;
Description: To be documented
[Expand]
function UARTDeviceFindByName(const Name:String):PUARTDevice; inline;
Description: To be documented
[Expand]
function UARTDeviceFindByDescription(const Description:String):PUARTDevice; inline;
Description: To be documented
[Expand]
function UARTDeviceEnumerate(Callback:TUARTEnumerate; Data:Pointer):LongWord;
Description: To be documented
[Expand]
function UARTDeviceNotification(UART:PUARTDevice; Callback:TUARTNotification; Data:Pointer; Notification,Flags:LongWord):LongWord;
Description: To be documented
UART serial functions
[Expand]
function UARTSerialDeviceOpen(Serial:PSerialDevice; BaudRate,DataBits,StopBits,Parity,FlowControl,ReceiveDepth,TransmitDepth:LongWord):LongWord;
Description: To be documented
[Expand]
function UARTSerialDeviceClose(Serial:PSerialDevice):LongWord;
Description: To be documented
[Expand]
function UARTSerialDeviceRead(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: To be documented
[Expand]
function UARTSerialDeviceWrite(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: To be documented
[Expand]
function UARTSerialDeviceStatus(Serial:PSerialDevice):LongWord;
Description: To be documented
[Expand]
function UARTSerialDeviceProperties(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;
Description: To be documented
UART helper functions
[Expand]
function UARTGetCount:LongWord; inline;
Description: Get the current UART count
[Expand]
function UARTDeviceGetDefault:PUARTDevice; inline;
Description: Get the current default UART device
[Expand]
function UARTDeviceSetDefault(UART:PUARTDevice):LongWord;
Description: Set the current default UART device
[Expand]
function UARTDeviceCheck(UART:PUARTDevice):PUARTDevice;
Description: Check if the supplied UART is in the UART table
[Expand]
procedure UARTLog(Level:LongWord;UART:PUARTDevice; const AText:String);
Description: To be documented
[Expand]
procedure UARTLogInfo(UART:PUARTDevice; const AText:String); inline;
Description: To be documented
[Expand]
procedure UARTLogError(UART:PUARTDevice; const AText:String); inline;
Description: To be documented
[Expand]
procedure UARTLogDebug(UART:PUARTDevice; const AText:String); inline;
Description: To be documented
UART serial helper functions
[Expand]
function UARTSerialDeviceReceive(UART:PUARTDevice):LongWord;
Description: To be documented
[Expand]
function UARTSerialDeviceTransmit(UART:PUARTDevice):LongWord;
Description: To be documented
Return to Unit Reference
