Unit PlatformQEMUVPB

From Ultibo.org
Revision as of 02:55, 14 December 2016 by Ultibo (Talk | contribs)

Jump to: navigation, search

Return to Unit Reference


Description


To be documented

Constants



QEMUVPB specific constants QEMUVPB_*
QEMUVPB_STARTUP_ADDRESS = $00010000; Address of StartupHandler on Reset


QEMUVPB page table constants QEMUVPB_PAGE_TABLE_*
QEMUVPB_PAGE_TABLE_BASE = $00004000; Place the first level Page Table after the interrupt vectors at 0x00001000 and before the code start at 0x00010000
QEMUVPB_PAGE_TABLE_SIZE = SIZE_16K; ARMv7 first level Page Table is exactly 16KB in size (4096 32 bit (4 byte) entries)


QEMUVPB vector table constants QEMUVPB_VECTOR_TABLE_*
QEMUVPB_VECTOR_TABLE_BASE = $00001000; Place the Interrupt Vector Table at 0x00001000 before the code start at 0x00010000
QEMUVPB_VECTOR_TABLE_SIZE = SIZE_64; The Interrupt Vector Table is exactly 64 bytes (16 32 bit (4 byte) entries)
QEMUVPB_VECTOR_TABLE_COUNT = 8; The Interrupt Vector Table contains 8 entries on an ARMv7 device


QEMUVPB CPU count constants QEMUVPB_CPU_*
QEMUVPB_CPU_COUNT = VERSATILEPB_CPU_COUNT;  
QEMUVPB_CPU_BOOT = CPU_ID_0;  
QEMUVPB_CPU_MASK = CPU_AFFINITY_0;  


QEMUVPB SWI constants QEMUVPB_SWI_*
QEMUVPB_SWI_COUNT = 256; Number of available SWI entries


QEMUVPB kernel name constants QEMUVPB_KERNEL_*
QEMUVPB_KERNEL_NAME = 'kernel.bin';  
QEMUVPB_KERNEL_NAME = 'kernel64.bin';  
QEMUVPB_KERNEL_CONFIG = ; Not available as a file
QEMUVPB_KERNEL_COMMAND = ; Not available as a file


Type definitions


To be documented

Public variables


To be documented

Function declarations



Initialization functions

procedure QEMUVPBInit;
Description: To be documented
Note None documented


QEMUVPB platform functions

procedure QEMUVPBBoardInit;
Description: To be documented
Note None documented


procedure QEMUVPBMemoryInit;
Description: To be documented
Note None documented


procedure QEMUVPBClockInit;
Description: To be documented
Note None documented


procedure QEMUVPBPowerInit;
Description: To be documented
Note None documented


procedure QEMUVPBInterruptInit;
Description: To be documented
Note None documented


procedure QEMUVPBPeripheralInit;
Description: To be documented
Note None documented


procedure QEMUVPBFramebufferInit;
Description: To be documented
Note None documented


procedure QEMUVPBPageTableInit;
Description: Initialize the Hardware Page Tables before enabling the MMU
Note See ??????


function QEMUVPBRequestExIRQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;
Description: Request registration of the supplied handler to the specified IRQ number
CPUID CPU to route IRQ to
Number IRQ number to register
Handler Interrupt handler function to register
HandlerEx Extended Interrupt handler function to register
Note Only one of Handler or HandlerEx can be specified


function QEMUVPBReleaseExIRQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;
Description: Request deregistration of the supplied handler from the specified IRQ number
CPUID CPU to route IRQ to
Number IRQ number to deregister
Handler Interrupt handler function to deregister
HandlerEx Extended Interrupt handler function to deregister
Note Only one of Handler or HandlerEx can be specified


function QEMUVPBRequestExFIQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;
Description: Request registration of the supplied handler to the specified FIQ number
CPUID CPU to route FIQ to
Number FIQ number to register
Handler Interrupt handler function to register
HandlerEx Extended Interrupt handler function to register
Note Only one of Handler or HandlerEx can be specified


function QEMUVPBReleaseExFIQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;
Description: Request deregistration of the supplied handler from the specified FIQ number
CPUID CPU to route FIQ to
Number FIQ number to deregister
Handler Interrupt handler function to deregister
HandlerEx Extended Interrupt handler function to deregister
Note Only one of Handler or HandlerEx can be specified


function QEMUVPBRegisterSystemCallEx(CPUID,Number:LongWord; Handler:TSystemCallHandler; HandlerEx:TSystemCallExHandler):LongWord;
Description: Request registration of the supplied extended handler to the specified System Call number
CPUID The CPU ID to register the System Call against (Ignored on QEMUVPB)
Number The System Call number to be registered
Handler The handler function to be registered
HandlerEx The extended handler function to be registered
Note Only one of Handler or HandlerEx can be specified


function QEMUVPBDeregisterSystemCallEx(CPUID,Number:LongWord; Handler:TSystemCallHandler; HandlerEx:TSystemCallExHandler):LongWord;
Description: Request deregistration of the supplied extended handler from the specified System Call number
CPUID The CPU ID to deregister the System Call from (Ignored on QEMUVPB)
Number The System Call number to be deregistered
Handler The handler function to be deregistered
HandlerEx The extended handler function to be deregistered
Note Only one of Handler or HandlerEx can be specified


function QEMUVPBGetInterruptEntry(Number:LongWord):TInterruptEntry;
Description: To be documented
Note Get the interrupt entry for the specified interrupt number


function QEMUVPBGetSystemCallEntry(Number:LongWord):TSystemCallEntry;
Description: Get the system call entry for the specified system call number
Note None documented


function QEMUVPBSystemRestart(Delay:LongWord):LongWord;
Description: To be documented
Note None documented


function QEMUVPBSystemShutdown(Delay:LongWord):LongWord;
Description: To be documented
Note None documented


function QEMUVPBClockGetCount:LongWord;
Description: Gets the current system clock count (32 least significant bits of total)
Note On the VersatilePB this comes from the 24MHz counter which will overflow every 178 seconds


function QEMUVPBClockGetTotal:Int64;
Description: Gets the total system clock count
Note On the VersatilePB this comes from the 24MHz counter which will overflow every 178 seconds and increment the rollover value. This is only accurate if either ClockGetCount or ClockGetTotal is called at least once per 178 seconds on order to increment the rollover.


QEMUVPB thread functions

procedure QEMUVPBSchedulerInit;
Description: Initialize the scheduler interrupt on the boot CPU
Note None documented


QEMUVPB IRQ functions

function QEMUVPBDispatchIRQ(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;
Description: Process any pending IRQ requests
Note Called by ARMv7/8IRQHandler in PlatformARMv7/8

A DataMemoryBarrier is executed before and after calling this function


function QEMUVPBHandleIRQ(Number,CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;
Description: Call the handler function for an IRQ that was received, or halt if it doesn't exist
Note None documented


QEMUVPB FIQ functions

function QEMUVPBDispatchFIQ(CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;
Description: Process any pending FIQ requests
Note Called by ARMv7/8FIQHandler in PlatformARMv7/8

A DataMemoryBarrier is executed before and after calling this function


function QEMUVPBHandleFIQ(Number,CPUID:LongWord; Thread:TThreadHandle):TThreadHandle;
Description: Call the handler function for an FIQ that was received, or halt if it doesn't exist
Note None documented


QEMUVPB SWI functions

function QEMUVPBDispatchSWI(CPUID:LongWord; Thread:TThreadHandle; Request:PSystemCallRequest):TThreadHandle;
Description: Process an SWI request
Note Called by ARMv7/8SoftwareInterruptHandler in PlatformARMv7/8

A DataMemoryBarrier is executed before and after calling this function


QEMUVPB clock functions

procedure QEMUVPBClockInterrupt(Parameter:Pointer);
Description: Interrupt handler function for the clock interrupt
Note This schedules another clock interrupt to occur CLOCK_CYCLES_PER_TICK in the future, then updates ClockTicks and ClockSeconds and checks for timers to trigger.


procedure QEMUVPBClockUpdate(Cycles:LongWord; var Last:LongWord);
Description: Setup a clock interrupt to trigger after the specified number of clock cycles
Cycles Number of cycles after which the timer interrupt is to be triggered
Note This refers to native clock cycles as specified by CLOCK_FREQUENCY


QEMUVPB scheduler functions

function QEMUVPBSchedulerInterrupt(CPUID:LongWord; Thread:TThreadHandle; Parameter:Pointer):TThreadHandle;
Description: Interrupt handler function for the scheduler interrupt
Note This schedules another scheduler interrupt to occur SCHEDULER_CLOCKS_PER_INTERRUPT in the future, then checks for threads to wakeup or timeout and the next thread to schedule.


procedure QEMUVPBSchedulerUpdate(Cycles:LongWord; var Last:LongWord);
Description: Setup a scheduler interrupt to trigger after the specified number of clock cycles
Cycles Number of cycles after which the scheduler interrupt is to be triggered
Note This refers to native clock cycles as specified by VERSATILEPB_TIMER_FREQUENCY


procedure QEMUVPBSchedulerSystemCall(Request:PSystemCallRequest);
Description: System Call handler for the scheduler
Note This is registered to receive requests for the SYSTEM_CALL_CONTEXT_SWITCH and will perform a context switch from within an SWI


QEMUVPB framebuffer functions

function QEMUVPBFramebufferDeviceAllocate(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;
Description: Implementation of FramebufferDeviceAllocate API for PL110 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceAllocate instead


function QEMUVPBFramebufferDeviceRelease(Framebuffer:PFramebufferDevice):LongWord;
Description: Implementation of FramebufferDeviceRelease API for PL110 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceRelease instead


function QEMUVPBFramebufferDeviceBlank(Framebuffer:PFramebufferDevice; Blank:Boolean):LongWord;
Description: Implementation of FramebufferDevicBlank API for PL110 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDevicBlank instead


function QEMUVPBFramebufferDeviceCommit(Framebuffer:PFramebufferDevice; Address,Size,Flags:LongWord):LongWord;
Description: Implementation of FramebufferDeviceCommit API for PL110 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceCommit instead


function QEMUVPBFramebufferDeviceSetProperties(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;
Description: Implementation of FramebufferDeviceSetProperties API for PL110 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceSetProperties instead


QEMUVPB helper functions

procedure QEMUVPBBootBlink; assembler; nostackframe;
Description: Output characters to UART0 without dependency on any other RTL setup
Note None documented


procedure QEMUVPBBootOutput(Value:LongWord);
Description: Output characters to UART0 without dependency on any other RTL setup
Note Based on hexstrings() function by dwelch67 (https://github.com/dwelch67)


Return to Unit Reference