Unit GlobalSock
Return to Unit Reference
Description
Ultibo Global Socket Definitions unit
Constants
FD_*
FD_SETSIZE = 64;
|
|
IOCPARM_MASK = $7f;
|
|
IOC_VOID = $20000000;
|
|
IOC_OUT = $40000000;
|
|
IOC_IN = $80000000;
|
|
IOC_INOUT = (IOC_IN or IOC_OUT);
|
|
FIONREAD = Cardinal( IOC_OUT or
|
get # bytes to read |
((4 and IOCPARM_MASK) shl 16) or (102 shl 8) or 127);
|
|
FIONBIO = Cardinal(IOC_IN or
|
set/clear non-blocking i/o |
((4 and IOCPARM_MASK) shl 16) or (102 shl 8) or 126);
|
|
FIOASYNC = Cardinal(IOC_IN or
|
set/clear async i/o |
((4 and IOCPARM_MASK) shl 16) or (102 shl 8) or 125);
|
|
SIOCSHIWAT = Cardinal( IOC_IN or
|
set high watermark |
((4 and IOCPARM_MASK) shl 16) or (115 shl 8) or 0);
|
|
SIOCGHIWAT = Cardinal( IOC_OUT or
|
get high watermark |
((4 and IOCPARM_MASK) shl 16) or (115 shl 8) or 1);
|
|
SIOCSLOWAT = Cardinal( IOC_IN or
|
set low watermark |
((4 and IOCPARM_MASK) shl 16) or (115 shl 8) or 2);
|
|
SIOCGLOWAT = Cardinal( IOC_OUT or
|
get low watermark |
((4 and IOCPARM_MASK) shl 16) or (115 shl 8) or 3);
|
|
SIOCATMARK = Cardinal( IOC_OUT or
|
at oob mark |
((4 and IOCPARM_MASK) shl 16) or (115 shl 8) or 7);
|
|
IMPLINK_IP = 155;
|
|
IMPLINK_LOWEXPER = 156;
|
|
IMPLINK_HIGHEXPER = 158;
|
|
TF_DISCONNECT = $01;
|
|
TF_REUSE_SOCKET = $02;
|
|
TF_WRITE_BEHIND = $04;
|
|
INVALID_SOCKET = TSocket(NOT(0));
|
This is used instead of -1, since the TSocket type is unsigned. |
SOCKET_ERROR = -1;
|
|
Level number for (get/set)sockopt() to apply to socket itself | |
SOL_SOCKET = $ffff;
|
options for socket level |
Maximum queue length specifiable by listen | |
SOMAXCONN = $7fffffff;
|
|
Define constant based on rfc883, used by gethostbyxxxx() calls | |
MAXGETHOSTSTRUCT = 1024;
|
|
Define flags to be used with the WSAAsyncSelect() call | |
FD_READ = $01;
|
|
FD_WRITE = $02;
|
|
FD_OOB = $04;
|
|
FD_ACCEPT = $08;
|
|
FD_CONNECT = $10;
|
|
FD_CLOSE = $20;
|
|
WSADESCRIPTION_LEN = 256;
|
|
WSASYS_STATUS_LEN = 128;
|
|
Global Socket constants for enhanced Winsock functions | |
MAX_NAME_SIZE = 80;
|
|
MAX_NAME_ALIASES = 5;
|
|
MAX_NAME_SERVERS = 5;
|
|
MAX_HOST_ALIASES = 16;
|
|
INET_ADDRSTR_ANY = '0.0.0.0';
|
|
INET6_ADDRSTR_INIT = '0::0';
|
|
INET_ADDRSTR_BROADCAST = '255.255.255.255';
|
|
INET_ADDRSTRLEN = 16;
|
Max size of numeric form of IPv4 address |
INET6_ADDRSTRLEN = 46;
|
Max size of numeric form of IPv6 address |
IPPROTO_*
IPPROTO_IP = 0;
|
dummy for IP |
IPPROTO_ICMP = 1;
|
control message protocol |
IPPROTO_IGMP = 2;
|
group management protocol |
IPPROTO_GGP = 3;
|
gateway^2 (deprecated) |
IPPROTO_TCP = 6;
|
tcp |
IPPROTO_EGP = 8;
|
egp |
IPPROTO_PUP =12;
|
pup |
IPPROTO_UDP =17;
|
user datagram protocol |
IPPROTO_HMP =20;
|
hmp |
IPPROTO_IDP =22;
|
xns idp |
IPPROTO_RDP =27;
|
rdp |
IPPROTO_IPV6 = 41;
|
IP6 header |
IPPROTO_ROUTING = 43;
|
IP6 routing header |
IPPROTO_FRAGMENT = 44;
|
IP6 fragmentation header |
IPPROTO_ICMPV6 = 58;
|
ICMP6 |
IPPROTO_RVD = 66;
|
rvd |
IPPROTO_ND = 77;
|
UNOFFICIAL net disk proto |
IPPROTO_RAW = 255;
|
raw IP packet |
IPPROTO_MAX = 256;
|
|
NSPROTO_IPX = 1000;
|
ipx protocol |
NSPROTO_SPX = 1256;
|
spx protocol |
NSPROTO_SPXII = 1257;
|
spxii protocol |
IPPORT_*
Port/socket numbers: network standard functions | |
IPPORT_ANY = 0;
|
|
IPPORT_ECHO = 7;
|
|
IPPORT_DISCARD = 9;
|
|
IPPORT_SYSTAT = 11;
|
|
IPPORT_DAYTIME = 13;
|
|
IPPORT_NETSTAT = 15;
|
|
IPPORT_FTP = 21;
|
|
IPPORT_TELNET = 23;
|
|
IPPORT_SMTP = 25;
|
|
IPPORT_TIMESERVER = 37;
|
|
IPPORT_NAMESERVER = 42;
|
|
IPPORT_WHOIS = 43;
|
|
IPPORT_DNS = 53;
|
|
IPPORT_MTP = 57;
|
|
IPPORT_BOOTPS = 67;
|
|
IPPORT_BOOTPC = 68;
|
|
Port/socket numbers: host specific functions | |
IPPORT_TFTP = 69;
|
|
IPPORT_RJE = 77;
|
|
IPPORT_FINGER = 79;
|
|
IPPORT_TTYLINK = 87;
|
|
IPPORT_SUPDUP = 95;
|
|
UNIX TCP sockets | |
IPPORT_EXECSERVER = 512;
|
|
IPPORT_LOGINSERVER = 513;
|
|
IPPORT_CMDSERVER = 514;
|
|
IPPORT_EFSSERVER = 520;
|
|
UNIX UDP sockets | |
IPPORT_BIFFUDP = 512;
|
|
IPPORT_WHOSERVER = 513;
|
|
IPPORT_ROUTESERVER = 520;
|
|
Ports < IPPORT_RESERVED are reserved for privileged processes (e.g. root) | |
IPPORT_RESERVED = 1024;
|
IP_*
Options for use with [gs]etsockopt at the IP level | |
IP_OPTIONS = 1;
|
|
IP_MULTICAST_IF = 2;
|
set/get IP multicast interface |
IP_MULTICAST_TTL = 3;
|
set/get IP multicast timetolive |
IP_MULTICAST_LOOP = 4;
|
set/get IP multicast loopback |
IP_ADD_MEMBERSHIP = 5;
|
add an IP group membership |
IP_DROP_MEMBERSHIP = 6;
|
drop an IP group membership |
IP_TTL = 7;
|
set/get IP Time To Live |
IP_TOS = 8;
|
set/get IP Type Of Service |
IP_DONTFRAGMENT = 9;
|
set/get IP Don't Fragment flag |
IP_HDRINCL = 10;
|
set/get IP Header include |
IP_DEFAULT_MULTICAST_TTL = 1;
|
normally limit m'casts to 1 hop |
IP_DEFAULT_MULTICAST_LOOP = 1;
|
normally hear sends if a member |
IP_MAX_MEMBERSHIPS = 20;
|
per socket; must fit in one mbuf |
SOCK_*
SOCK_UNSPEC = 0;
|
unspecified |
SOCK_STREAM = 1;
|
stream socket |
SOCK_DGRAM = 2;
|
datagram socket |
SOCK_RAW = 3;
|
raw-protocol interface |
SOCK_RDM = 4;
|
reliably-delivered message |
SOCK_SEQPACKET = 5;
|
sequenced packet stream |
SOCK_PACKET = 10;
|
linux specific way of getting packets at the dev level. For writing rarp and other similar things on the user level. |
SO_*
Option flags per-socket | |
SO_DEBUG = $0001;
|
turn on debugging info recording |
SO_ACCEPTCONN = $0002;
|
socket has had listen() |
SO_REUSEADDR = $0004;
|
allow local address reuse |
SO_KEEPALIVE = $0008;
|
keep connections alive |
SO_DONTROUTE = $0010;
|
just use interface addresses |
SO_BROADCAST = $0020;
|
permit sending of broadcast msgs |
SO_USELOOPBACK = $0040;
|
bypass hardware when possible |
SO_LINGER = $0080;
|
linger on close if data present |
SO_OOBINLINE = $0100;
|
leave received OOB data in line |
SO_REUSEPORT = $0200;
|
allow local address & port reuse |
SO_TIMESTAMP = $0400;
|
timestamp received dgram traffic |
SO_ACCEPTFILTER = $1000;
|
there is an accept filter |
SO_DONTLINGER = not(SO_LINGER);
|
($ff7f) |
SO_EXCLUSIVEADDRUSE = not(SO_REUSEADDR);
|
disallow local address reuse ($fffb) |
SO_DONTLINGER = $ff7f;
|
|
Additional options | |
SO_SNDBUF = $1001;
|
send buffer size |
SO_RCVBUF = $1002;
|
receive buffer size |
SO_SNDLOWAT = $1003;
|
send low-water mark |
SO_RCVLOWAT = $1004;
|
receive low-water mark |
SO_SNDTIMEO = $1005;
|
send timeout |
SO_RCVTIMEO = $1006;
|
receive timeout |
SO_ERROR = $1007;
|
get error status and clear |
SO_TYPE = $1008;
|
get socket type |
SO_CONNTIMEO = $1009;
|
connection timeout |
Options for connect and disconnect data and options. Used only by non-TCP/IP transports such as DECNet, OSI TP4, etc. | |
SO_CONNDATA = $7000;
|
|
SO_CONNOPT = $7001;
|
|
SO_DISCDATA = $7002;
|
|
SO_DISCOPT = $7003;
|
|
SO_CONNDATALEN = $7004;
|
|
SO_CONNOPTLEN = $7005;
|
|
SO_DISCDATALEN = $7006;
|
|
SO_DISCOPTLEN = $7007;
|
|
Option for opening sockets for synchronous access | |
SO_OPENTYPE = $7008;
|
|
SO_SYNCHRONOUS_ALERT = $10;
|
|
SO_SYNCHRONOUS_NONALERT = $20;
|
|
Other NT-specific options | |
SO_MAXDG = $7009;
|
|
SO_MAXPATHDG = $700A;
|
|
SO_UPDATE_ACCEPT_CONTEXT = $700B;
|
|
SO_CONNECT_TIME = $700C;
|
TCP_*
TCP_NODELAY = $0001;
|
|
TCP_MAXSEG = $0002;
|
|
TCP_NOPUSH = $0004;
|
|
TCP_NOOPT = $0008;
|
|
TCP_BSDURGENT = $7000;
|
Implement BSD Urgent instead of RFC793/1122 |
TCP_WSCALE = $0010;
|
|
TCP_NOSACK = $0020;
|
UDP_*
UDP_NOCHECKSUM = $0001;
|
AF_*
AF_UNSPEC = 0;
|
unspecified |
AF_UNIX = 1;
|
local to host (pipes, portals) |
AF_INET = 2;
|
internetwork: UDP, TCP, etc. |
AF_IMPLINK = 3;
|
arpanet imp addresses |
AF_PUP = 4;
|
pup protocols: e.g. BSP |
AF_CHAOS = 5;
|
mit CHAOS protocols |
AF_IPX = 6;
|
IPX and SPX |
AF_NS = 6;
|
XEROX NS protocols |
AF_ISO = 7;
|
ISO protocols |
AF_OSI = AF_ISO;
|
OSI is ISO |
AF_ECMA = 8;
|
european computer manufacturers |
AF_DATAKIT = 9;
|
datakit protocols |
AF_CCITT = 10;
|
CCITT protocols, X.25 etc |
AF_SNA = 11;
|
IBM SNA |
AF_DECnet = 12;
|
DECnet |
AF_DLI = 13;
|
Direct data link interface |
AF_LAT = 14;
|
LAT |
AF_HYLINK = 15;
|
NSC Hyperchannel |
AF_APPLETALK = 16;
|
AppleTalk |
AF_NETBIOS = 17;
|
NetBios-style addresses |
AF_VOICEVIEW = 18;
|
VoiceView |
AF_FIREFOX = 19;
|
FireFox |
AF_UNKNOWN1 = 20;
|
Somebody is using this! |
AF_BAN = 21;
|
Banyan |
AF_ATM = 22;
|
Native ATM Services |
AF_INET6 = 23;
|
Internetwork Version 6 |
AF_CLUSTER = 24;
|
Microsoft Wolfpack |
AF_12844 = 25;
|
IEEE 1284.4 WG AF |
AF_IRDA = 26;
|
IrDA |
AF_NETDES = 28;
|
Network Designers OSI & gateway enabled |
AF_MAX = 29;
|
PF_*
PF_UNSPEC = AF_UNSPEC;
|
|
PF_UNIX = AF_UNIX;
|
|
PF_INET = AF_INET;
|
|
PF_IMPLINK = AF_IMPLINK;
|
|
PF_PUP = AF_PUP;
|
|
PF_CHAOS = AF_CHAOS;
|
|
PF_NS = AF_NS;
|
|
PF_IPX = AF_IPX;
|
|
PF_OSI = AF_OSI;
|
|
PF_ECMA = AF_ECMA;
|
|
PF_DATAKIT = AF_DATAKIT;
|
|
PF_CCITT = AF_CCITT;
|
|
PF_SNA = AF_SNA;
|
|
PF_DECnet = AF_DECnet;
|
|
PF_DLI = AF_DLI;
|
|
PF_LAT = AF_LAT;
|
|
PF_HYLINK = AF_HYLINK;
|
|
PF_APPLETALK = AF_APPLETALK;
|
|
PF_VOICEVIEW = AF_VOICEVIEW;
|
|
PF_FIREFOX = AF_FIREFOX;
|
|
PF_UNKNOWN1 = AF_UNKNOWN1;
|
|
PF_BAN = AF_BAN;
|
|
PF_ATM = AF_ATM;
|
|
PF_INET6 = AF_INET6;
|
|
PF_CLUSTER = AF_CLUSTER;
|
|
PF_12844 = AF_12844;
|
|
PF_IRDA = AF_IRDA;
|
|
PF_NETDES = AF_NETDES;
|
|
PF_MAX = AF_MAX;
|
MSG_*
MSG_OOB = $1;
|
process out-of-band data |
MSG_PEEK = $2;
|
peek at incoming message |
MSG_DONTROUTE = $4;
|
send without using routing tables |
MSG_INTERRUPT = $10;
|
send/recv in the interrupt context |
MSG_MAXIOVLEN = 16;
|
|
MSG_PARTIAL = $8000;
|
partial send or recv for message xport |
WSAE*, EAI_*
All Windows Sockets error constants are biased by WSABASEERR from the "normal" | |
WSABASEERR = 10000;
|
|
Windows Sockets definitions of regular Microsoft C error constants | |
WSAEINTR = (WSABASEERR+4);
|
|
WSAEBADF = (WSABASEERR+9);
|
|
WSAEACCES = (WSABASEERR+13);
|
|
WSAEFAULT = (WSABASEERR+14);
|
|
WSAEINVAL = (WSABASEERR+22);
|
|
WSAEMFILE = (WSABASEERR+24);
|
|
Windows Sockets definitions of regular Berkeley error constants | |
WSAEWOULDBLOCK = (WSABASEERR+35);
|
|
WSAEINPROGRESS = (WSABASEERR+36);
|
|
WSAEALREADY = (WSABASEERR+37);
|
|
WSAENOTSOCK = (WSABASEERR+38);
|
|
WSAEDESTADDRREQ = (WSABASEERR+39);
|
|
WSAEMSGSIZE = (WSABASEERR+40);
|
|
WSAEPROTOTYPE = (WSABASEERR+41);
|
|
WSAENOPROTOOPT = (WSABASEERR+42);
|
|
WSAEPROTONOSUPPORT = (WSABASEERR+43);
|
|
WSAESOCKTNOSUPPORT = (WSABASEERR+44);
|
|
WSAEOPNOTSUPP = (WSABASEERR+45);
|
|
WSAEPFNOSUPPORT = (WSABASEERR+46);
|
|
WSAEAFNOSUPPORT = (WSABASEERR+47);
|
|
WSAEADDRINUSE = (WSABASEERR+48);
|
|
WSAEADDRNOTAVAIL = (WSABASEERR+49);
|
|
WSAENETDOWN = (WSABASEERR+50);
|
|
WSAENETUNREACH = (WSABASEERR+51);
|
|
WSAENETRESET = (WSABASEERR+52);
|
|
WSAECONNABORTED = (WSABASEERR+53);
|
|
WSAECONNRESET = (WSABASEERR+54);
|
|
WSAENOBUFS = (WSABASEERR+55);
|
|
WSAEISCONN = (WSABASEERR+56);
|
|
WSAENOTCONN = (WSABASEERR+57);
|
|
WSAESHUTDOWN = (WSABASEERR+58);
|
|
WSAETOOMANYREFS = (WSABASEERR+59);
|
|
WSAETIMEDOUT = (WSABASEERR+60);
|
|
WSAECONNREFUSED = (WSABASEERR+61);
|
|
WSAELOOP = (WSABASEERR+62);
|
|
WSAENAMETOOLONG = (WSABASEERR+63);
|
|
WSAEHOSTDOWN = (WSABASEERR+64);
|
|
WSAEHOSTUNREACH = (WSABASEERR+65);
|
|
WSAENOTEMPTY = (WSABASEERR+66);
|
|
WSAEPROCLIM = (WSABASEERR+67);
|
|
WSAEUSERS = (WSABASEERR+68);
|
|
WSAEDQUOT = (WSABASEERR+69);
|
|
WSAESTALE = (WSABASEERR+70);
|
|
WSAEREMOTE = (WSABASEERR+71);
|
|
WSAEDISCON = (WSABASEERR+101);
|
|
Extended Windows Sockets error constant definitions | |
WSASYSNOTREADY = (WSABASEERR+91);
|
|
WSAVERNOTSUPPORTED = (WSABASEERR+92);
|
|
WSANOTINITIALISED = (WSABASEERR+93);
|
|
WSAENOMORE = (WSABASEERR+102);
|
|
WSAECANCELLED = (WSABASEERR+103);
|
|
WSAEINVALIDPROCTABLE = (WSABASEERR+104);
|
|
WSAEINVALIDPROVIDER = (WSABASEERR+105);
|
|
WSAEPROVIDERFAILEDINIT = (WSABASEERR+106);
|
|
WSASYSCALLFAILURE = (WSABASEERR+107);
|
|
WSASERVICE_NOT_FOUND = (WSABASEERR+108);
|
|
WSATYPE_NOT_FOUND = (WSABASEERR+109);
|
|
WSA_E_NO_MORE = (WSABASEERR+110);
|
|
WSA_E_CANCELLED = (WSABASEERR+111);
|
|
WSAEREFUSED = (WSABASEERR+112);
|
|
Error return codes from gethostbyname() and gethostbyaddr() (when using the resolver). Note that these errors are retrieved via WSAGetLastError() and must therefore follow the rules for avoiding clashes with error numbers from specific implementations or language run-time systems. For this reason the codes are based at WSABASEERR+1001. Note also that [WSA]NO_ADDRESS is defined only for compatibility purposes. | |
Authoritative Answer: Host not found | |
WSAHOST_NOT_FOUND = (WSABASEERR+1001);
|
|
HOST_NOT_FOUND = WSAHOST_NOT_FOUND;
|
|
Non-Authoritative: Host not found, or SERVERFAIL | |
WSATRY_AGAIN = (WSABASEERR+1002);
|
|
TRY_AGAIN = WSATRY_AGAIN;
|
|
Non recoverable errors, FORMERR, REFUSED, NOTIMP | |
WSANO_RECOVERY = (WSABASEERR+1003)
|
|
NO_RECOVERY = WSANO_RECOVERY;
|
|
Valid name, no data record of requested type | |
WSANO_DATA = (WSABASEERR+1004);
|
|
NO_DATA = WSANO_DATA;
|
|
no address, look for MX record | |
WSANO_ADDRESS = WSANO_DATA;
|
|
NO_ADDRESS = WSANO_ADDRESS;
|
|
WinSock 2 extension -- new error codes and type definition | |
WSA_IO_PENDING = ERROR_IO_PENDING;
|
|
WSA_IO_INCOMPLETE = ERROR_IO_INCOMPLETE;
|
|
WSA_INVALID_HANDLE = ERROR_INVALID_HANDLE;
|
|
WSA_INVALID_PARAMETER = ERROR_INVALID_PARAMETER;
|
|
WSA_NOT_ENOUGH_MEMORY = ERROR_NOT_ENOUGH_MEMORY;
|
|
WSA_OPERATION_ABORTED = ERROR_OPERATION_ABORTED;
|
|
WSA_INVALID_EVENT = WSAEVENT(nil);
|
|
WSA_MAXIMUM_WAIT_EVENTS = MAXIMUM_WAIT_OBJECTS;
|
|
WSA_WAIT_FAILED = $ffffffff;
|
|
WSA_WAIT_EVENT_0 = WAIT_OBJECT_0;
|
|
WSA_WAIT_IO_COMPLETION = WAIT_IO_COMPLETION;
|
|
WSA_WAIT_TIMEOUT = WAIT_TIMEOUT;
|
|
WSA_INFINITE = INFINITE;
|
|
Windows Sockets errors redefined as regular Berkeley error constants. These are commented out in Windows NT to avoid conflicts with errno.h. Use the WSA constants instead. | |
EWOULDBLOCK = WSAEWOULDBLOCK;
|
|
EINPROGRESS = WSAEINPROGRESS;
|
|
EALREADY = WSAEALREADY;
|
|
ENOTSOCK = WSAENOTSOCK;
|
|
EDESTADDRREQ = WSAEDESTADDRREQ;
|
|
EMSGSIZE = WSAEMSGSIZE;
|
|
EPROTOTYPE = WSAEPROTOTYPE;
|
|
ENOPROTOOPT = WSAENOPROTOOPT;
|
|
EPROTONOSUPPORT = WSAEPROTONOSUPPORT;
|
|
ESOCKTNOSUPPORT = WSAESOCKTNOSUPPORT;
|
|
EOPNOTSUPP = WSAEOPNOTSUPP;
|
|
EPFNOSUPPORT = WSAEPFNOSUPPORT;
|
|
EAFNOSUPPORT = WSAEAFNOSUPPORT;
|
|
EADDRINUSE = WSAEADDRINUSE;
|
|
EADDRNOTAVAIL = WSAEADDRNOTAVAIL;
|
|
ENETDOWN = WSAENETDOWN;
|
|
ENETUNREACH = WSAENETUNREACH;
|
|
ENETRESET = WSAENETRESET;
|
|
ECONNABORTED = WSAECONNABORTED;
|
|
ECONNRESET = WSAECONNRESET;
|
|
ENOBUFS = WSAENOBUFS;
|
|
EISCONN = WSAEISCONN;
|
|
ENOTCONN = WSAENOTCONN;
|
|
ESHUTDOWN = WSAESHUTDOWN;
|
|
ETOOMANYREFS = WSAETOOMANYREFS;
|
|
ETIMEDOUT = WSAETIMEDOUT;
|
|
ECONNREFUSED = WSAECONNREFUSED;
|
|
ELOOP = WSAELOOP;
|
|
ENAMETOOLONG = WSAENAMETOOLONG;
|
|
EHOSTDOWN = WSAEHOSTDOWN;
|
|
EHOSTUNREACH = WSAEHOSTUNREACH;
|
|
ENOTEMPTY = WSAENOTEMPTY;
|
|
EPROCLIM = WSAEPROCLIM;
|
|
EUSERS = WSAEUSERS;
|
|
EDQUOT = WSAEDQUOT;
|
|
ESTALE = WSAESTALE;
|
|
EREMOTE = WSAEREMOTE;
|
|
ENOTREADY = WSASYSNOTREADY;
|
|
EVERNOTSUPPORTED = WSAVERNOTSUPPORTED;
|
|
ENOTINITIALISED = WSANOTINITIALISED;
|
|
Error codes from getaddrinfo() | |
EAI_AGAIN = WSATRY_AGAIN;
|
|
EAI_BADFLAGS = WSAEINVAL;
|
|
EAI_FAIL = WSANO_RECOVERY;
|
|
EAI_FAMILY = WSAEAFNOSUPPORT;
|
|
EAI_MEMORY = WSA_NOT_ENOUGH_MEMORY;
|
|
EAI_NODATA = WSANO_DATA;
|
|
EAI_NONAME = WSAHOST_NOT_FOUND;
|
|
EAI_SERVICE = WSATYPE_NOT_FOUND;
|
|
EAI_SOCKTYPE = WSAESOCKTNOSUPPORT;
|
|
EAI_NODATA = EAI_NONAME;
|
SD_*
SD_RECEIVE = $00;
|
|
SD_SEND = $01;
|
|
SD_BOTH = $02;
|
WSA_*
Global Socket constants for undocumented Winsock functions | |
WSA_MAX_INTERFACE_NAME_LEN = 256;
|
|
WSA_ANY_SIZE = 1;
|
|
WSA_MAX_ADAPTER_NAME = 128;
|
|
WSA_MAX_ADAPTER_DESCRIPTION_LENGTH = 128;
|
|
WSA_MAX_ADAPTER_NAME_LENGTH = 256;
|
|
WSA_MAX_ADAPTER_ADDRESS_LENGTH = 8;
|
|
WSA_MAX_HOSTNAME_LEN = 128;
|
|
WSA_MAX_DOMAIN_NAME_LEN = 128;
|
|
WSA_MAX_SCOPE_ID_LEN = 256;
|
|
WSA_MAXLEN_IFDESCR = 256;
|
|
WSA_MAXLEN_PHYSADDR = 8;
|
|
WSA_USE_CURRENT_TTL = DWORD(-1);
|
|
WSA_USE_CURRENT_FORWARDING = DWORD(-1);
|
|
WSA_IF_OPER_STATUS_NON_OPERATIONAL = 0;
|
|
WSA_IF_OPER_STATUS_UNREACHABLE = 1;
|
|
WSA_IF_OPER_STATUS_DISCONNECTED = 2;
|
|
WSA_IF_OPER_STATUS_CONNECTING = 3;
|
|
WSA_IF_OPER_STATUS_CONNECTED = 4;
|
|
WSA_IF_OPER_STATUS_OPERATIONAL = 5;
|
|
WSA_IF_TYPE_OTHER = 1;
|
Some other type of network interface |
WSA_IF_TYPE_ETHERNET_CSMACD = 6;
|
An Ethernet network interface |
WSA_IF_TYPE_ISO88025_TOKENRING = 9;
|
A token ring network interface |
WSA_IF_TYPE_FDDI = 15;
|
A Fiber Distributed Data Interface (FDDI) network interface |
WSA_IF_TYPE_PPP = 23;
|
A PPP network interface |
WSA_IF_TYPE_SOFTWARE_LOOPBACK = 24;
|
A software loopback network interface |
WSA_IF_TYPE_SLIP = 28;
|
A SLIP network interface |
WSA_IF_TYPE_ATM = 37;
|
An ATM network interface |
WSA_IF_TYPE_IEEE80211 = 71;
|
An IEEE 802.11 wireless network interface |
WSA_IF_TYPE_TUNNEL = 131;
|
A tunnel type encapsulation network interface |
WSA_IF_TYPE_IEEE1394 = 144;
|
An IEEE 1394 (Firewire) high performance serial bus network interface |
WSA_IF_TYPE_IEEE80216_WMAN = 237;
|
A mobile broadband interface for WiMax devices |
WSA_IF_TYPE_WWANPP = 243;
|
A mobile broadband interface for GSM-based devices |
WSA_IF_TYPE_WWANPP2 = 244;
|
A mobile broadband interface for CDMA-based devices |
WSA_IF_ADMIN_STATUS_UP = 1;
|
|
WSA_IF_ADMIN_STATUS_DOWN = 2;
|
|
WSA_IF_ADMIN_STATUS_TESTING = 3;
|
|
WSA_TCP_STATE_CLOSED = 1;
|
|
WSA_TCP_STATE_LISTEN = 2;
|
|
WSA_TCP_STATE_SYN_SENT = 3;
|
|
WSA_TCP_STATE_SYN_RCVD = 4;
|
|
WSA_TCP_STATE_ESTAB = 5;
|
|
WSA_TCP_STATE_FIN_WAIT1 = 6;
|
|
WSA_TCP_STATE_FIN_WAIT2 = 7;
|
|
WSA_TCP_STATE_CLOSE_WAIT = 8;
|
|
WSA_TCP_STATE_CLOSING = 9;
|
|
WSA_TCP_STATE_LAST_ACK = 10;
|
|
WSA_TCP_STATE_TIME_WAIT = 11;
|
|
WSA_TCP_STATE_DELETE_TCB = 12;
|
|
WSA_IP_FORWARDING = 1;
|
|
WSA_IP_NOT_FORWARDING = 2;
|
|
WSA_IPROUTE_TYPE_OTHER = 1;
|
|
WSA_IPROUTE_TYPE_INVALID = 2;
|
|
WSA_IPROUTE_TYPE_DIRECT = 3;
|
|
WSA_IPROUTE_TYPE_INDIRECT = 4;
|
|
WSA_IPROUTE_METRIC_UNUSED = DWORD(-1);
|
|
WSA_IPPROTO_OTHER = 1;
|
|
WSA_IPPROTO_LOCAL = 2;
|
|
WSA_IPPROTO_NETMGMT = 3;
|
|
WSA_IPPROTO_ICMP = 4;
|
|
WSA_IPPROTO_EGP = 5;
|
|
WSA_IPPROTO_GGP = 6;
|
|
WSA_IPPROTO_HELLO = 7;
|
|
WSA_IPPROTO_RIP = 8;
|
|
WSA_IPPROTO_IS_IS = 9;
|
|
WSA_IPPROTO_ES_IS = 10;
|
|
WSA_IPPROTO_CISCO = 11;
|
|
WSA_IPPROTO_BBN = 12;
|
|
WSA_IPPROTO_OSPF = 13;
|
|
WSA_IPPROTO_BGP = 14;
|
|
WSA_IPPROTO_NT_AUTOSTATIC = 10002;
|
|
WSA_IPPROTO_NT_STATIC = 10006;
|
|
WSA_IPPROTO_NT_STATIC_NON_DOD = 10007;
|
|
WSA_IPNET_TYPE_OTHER = 1;
|
|
WSA_IPNET_TYPE_INVALID = 2;
|
|
WSA_IPNET_TYPE_DYNAMIC = 3;
|
|
WSA_IPNET_TYPE_STATIC = 4;
|
|
WSA_GETNUMBEROFINTERFACES = 1;
|
|
WSA_GETIFENTRY = 2;
|
|
WSA_GETIFTABLE = 3;
|
|
WSA_GETIPADDRTABLE = 4;
|
|
WSA_GETIPNETTABLE = 5;
|
|
WSA_GETIPFORWARDTABLE = 6;
|
|
WSA_GETTCPTABLE = 7;
|
|
WSA_GETUDPTABLE = 8;
|
|
WSA_GETIPSTATISTICS = 9;
|
|
WSA_GETICMPSTATISTICS = 10;
|
|
WSA_GETTCPSTATISTICS = 11;
|
|
WSA_GETUDPSTATISTICS = 12;
|
|
WSA_SETIFENTRY = 13;
|
|
WSA_CREATEIPFORWARDENTRY = 14;
|
|
WSA_SETIPFORWARDENTRY = 15;
|
|
WSA_DELETEIPFORWARDENTRY = 16;
|
|
WSA_SETIPSTATISTICS = 17;
|
|
WSA_SETIPTTL = 18;
|
|
WSA_CREATEIPNETENTRY = 19;
|
|
WSA_SETIPNETENTRY = 20;
|
|
WSA_DELETEIPNETENTRY = 21;
|
|
WSA_FLUSHIPNETTABLE = 22;
|
|
WSA_CREATEPROXYARPENTRY = 23;
|
|
WSA_DELETEPROXTARPENTRY = 24;
|
|
WSA_SETTCPENTRY = 25;
|
|
WSA_GETINTERFACEINFO = 26;
|
|
WSA_GETUNIDIRECTIONALADAPTERINFO = 27;
|
|
WSA_GETBESTINTERFACE = 28;
|
|
WSA_GETBESTROUTE = 29;
|
|
WSA_NOTIFYADDRCHANGE = 30;
|
|
WSA_NOTIFYROUTECHANGE = 31;
|
|
WSA_GETADAPTERINDEX = 32;
|
|
WSA_ADDIPADDRESS = 33;
|
|
WSA_DELETEIPADDRESS = 34;
|
|
WSA_GETNETWORKPARAMS = 35;
|
|
WSA_GETADAPTERSINFO = 36;
|
|
WSA_GETPERADAPTERINFO = 37;
|
|
WSA_IPRELEASEADDRESS = 38;
|
|
WSA_IPRENEWADDRESS = 39;
|
|
WSA_SENDARP = 40;
|
|
WSA_GETRTTANDHOPCOUNT = 41;
|
|
WSA_GETFRIENDLYIFINDEX = 42;
|
|
WSA_ENABLEROUTER = 43;
|
|
WSA_UNENABLEROUTER = 44;
|
AI_*
Flags used in "hints" argument to getaddrinfo() | |
Note: Under Linux these values may be different | |
AI_PASSIVE = $00000001;
|
Socket address will be used in bind() call |
AI_CANONNAME = $00000002;
|
Return canonical name from DNS in the first ai_canonname (Cannot be used with AI_FQDN) |
AI_NUMERICHOST = $00000004;
|
Nodename must be a numeric address string |
AI_NUMERICSERV = $00000008;
|
Servicename must be a numeric port string |
AI_ALL = $00000100;
|
Return both IPv6 and IPv4 addresses |
AI_ADDRCONFIG = $00000400;
|
Only return addresses if a global address is configured (IPv4 or IPv6), loopback addresses do not count as global. |
AI_V4MAPPED = $00000800;
|
Map returned IPv4 addresses to IPv6 address format |
AI_NON_AUTHORITATIVE = $00004000;
|
Allow both autoritive and non authoritive return addresses (NS_EMAIL only) |
AI_SECURE = $00008000;
|
Obtain result using enhanced security only (NS_EMAIL only) |
AI_RETURN_PREFERRED_NAMES = $00010000;
|
Return preferred names (NS_EMAIL only) |
AI_FQDN = $00020000;
|
Return the FQDN for the single name specified on NodeName (Cannot be used with AI_CANONNAME) |
AI_FILESERVER = $00040000;
|
The requested name is being used for file sharing (Hint Only) |
NI_*
Flags for getnameinfo() | |
NI_NOFQDN = $01;
|
Only return nodename portion for local hosts |
NI_NUMERICHOST = $02;
|
Return numeric form of the host's address |
NI_NAMEREQD = $04;
|
Error if the host's name not in DNS |
NI_NUMERICSERV = $08;
|
Return numeric form of the service (port #) |
NI_DGRAM = $10;
|
Service is a datagram service |
NI_MAXHOST = 1025;
|
Max size of a fully-qualified domain name |
NI_MAXSERV = 32;
|
Max size of a service name |
Type definitions
Integer types
tOS_INT = LongInt;
|
|
tOS_UINT = DWORD;
|
|
ptOS_INT = ^tOS_INT;
|
|
ptOS_UINT = ^tOS_UINT;
|
|
u_int = tOS_UINT;
|
|
pu_int = ^u_int;
|
Character types
u_char = Char;
|
|
pu_char = ^u_char;
|
Numeric types
u_short = Word;
|
|
pu_short = ^u_short;
|
|
u_long = DWORD;
|
|
pu_long = ^u_long;
|
Socket types
TSocket = GlobalTypes.TSocket;
|
WSA event
WSAEVENT = GlobalTypes.WSAEVENT;
|
|
PWSAEVENT = ^WSAEVENT;
|
|
LPWSAEVENT = PWSAEVENT;
|
MB character
PMBChar = PChar;
|
FD set
TFDSet = fdset;
PFDSet = ^TFDSet;
fdset = record
fd_count: u_int;
|
|
fd_array: array[0..FD_SETSIZE-1] of TSocket;
|
Time value
TTimeVal = timeval;
PTimeVal = ^TTimeVal;
timeval = record
tv_sec: LongInt;
|
|
tv_usec: LongInt;
|
Host entry
THostEnt = hostent;
PHostEnt = ^THostEnt;
hostent = record
h_name: PChar;
|
|
h_aliases: ^PChar;
|
|
h_addrtype: Smallint;
|
|
h_length: Smallint;
|
|
case Byte of
|
|
0: (h_addr_list: ^PChar);
|
|
1: (h_addr: ^PChar)
|
Network entry
TNetEnt = netent;
PNetEnt = ^TNetEnt;
netent = record
n_name: PChar;
|
|
n_aliases: ^PChar;
|
|
n_addrtype: Smallint;
|
|
n_net: u_long;
|
Service entry
TServEnt = servent;
PServEnt = ^TServEnt;
servent = record
s_name: PChar;
|
|
s_aliases: ^PChar;
|
|
s_port: Smallint;
|
|
s_proto: PChar;
|
Protocol entry
TProtoEnt = protoent;
PProtoEnt = ^TProtoEnt;
protoent = record
p_name: PChar;
|
|
p_aliases: ^Pchar;
|
|
p_proto: Smallint;
|
Address types
SunB = packed record
s_b1, s_b2, s_b3, s_b4: u_char;
|
SunW = packed record
s_w1, s_w2: u_short;
|
IPv4 address
TInAddr = in_addr;
PInAddr = ^TInAddr;
in_addr = record
case integer of
|
|
0: (S_un_b: SunB);
|
|
1: (S_un_w: SunW);
|
|
2: (S_addr: u_long);
|
|
3: (S_bytes: packed array[1..4] of Byte);
|
IPv6 address
TIn6Addr = in6_addr;
PIn6Addr = ^TIn6Addr;
in6_addr = record
Note: IPv6 version of above | |
case byte of
|
|
0: (u6_addr8 : array[0..15] of byte);
|
|
1: (u6_addr16 : array[0..7] of Word);
|
|
2: (u6_addr32 : array[0..3] of Cardinal);
|
|
3: (s6_addr8 : array[0..15] of shortint);
|
|
4: (s6_addr : array[0..15] of shortint);
|
|
5: (s6_addr16 : array[0..7] of smallint);
|
|
6: (s6_addr32 : array[0..3] of LongInt);
|
|
case integer of
|
|
0: (S6_u8: array[0..15] of u_char);
|
|
1: (S6_u32: array[0..3] of u_int);
|
|
2: (S6_u64: array[0..1] of Int64);
|
|
S6_addr: array [0..15] of Byte;
|
IPX address
TIpxAddr = ipx_addr;
PIpxAddr = ^TIpxAddr;
ipx_addr = record
Note: IPX version of above | |
S_net: array [0..3] of Byte;
|
|
S_node: array [0..5] of Byte;
|
|
S_socket: Word;
|
Socket address IPv4
TSockAddrIn = sockaddr_in;
PSockAddrIn = ^TSockAddrIn;
sockaddr_in = record
case Integer of
|
|
0: (sin_family: u_short;
|
|
sin_port: u_short;
|
|
sin_addr: TInAddr;
|
|
sin_zero: array[0..7] of Char);
|
|
1: (sa_family: u_short;
|
|
sa_data: array[0..13] of Char)
|
Socket address IPv6
TSockAddr6 = sockaddr_in6;
PSOCKADDR6 = ^TSockAddr6;
TSockAddrIn6 = sockaddr_in6;
PSockAddrIn6 = ^TSockAddrIn6;
sockaddr_in6 = record
Note: IPv6 version of above | |
sin6_family: u_short;
|
AF_INET6 |
sin6_port: u_short;
|
transport layer port # |
sin6_flowinfo: u_int;
|
IPv6 flow information |
sin6_addr: in6_addr;
|
IPv6 address |
sin6_scope_id: u_int;
|
set of interfaces for a scope |
Socket address IPX
TSockAddrIpx = sockaddr_ipx;
PSockAddrIpx = ^TSockAddrIpx;
sockaddr_ipx = record
Note: IPX version of above | |
sipx_family: u_short;
|
AF_IPX |
sipx_addr: ipx_addr;
|
IPX address |
Socket address
PSOCKADDR = ^TSockAddr;
|
|
TSockAddr = sockaddr_in;
|
Socket protocol
TSockProto = sockproto;
PSockProto = ^TSockProto;
sockproto = record
Note: Structure used by kernel to pass protocol information in raw sockets | |
sp_family: u_short;
|
|
sp_protocol: u_short;
|
Linger
TLinger = linger;
PLinger = ^TLinger;
linger = record
Note: Structure used for manipulating linger option | |
l_onoff: u_short;
|
|
l_linger: u_short;
|
WSA data
TWSAData = WSAData;
PWSAData = ^TWSAData;
WSAData = record
Note: Also WSDATA | |
wVersion: Word;
|
|
wHighVersion: Word;
|
|
szDescription: array[0..WSADESCRIPTION_LEN] of Char;
|
|
szSystemStatus: array[0..WSASYS_STATUS_LEN] of Char;
|
|
iMaxSockets: Word;
|
|
iMaxUdpDg: Word;
|
|
lpVendorInfo: PChar;
|
Transmit file buffers
TTransmitFileBuffers = _TRANSMIT_FILE_BUFFERS;
TRANSMIT_FILE_BUFFERS = _TRANSMIT_FILE_BUFFERS;
PTransmitFileBuffers = ^TTransmitFileBuffers;
_TRANSMIT_FILE_BUFFERS = record
Head: Pointer;
|
|
HeadLength: DWORD;
|
|
Tail: Pointer;
|
|
TailLength: DWORD;
|
Multicast request
TMulticastRequest = ip_mreq;
PMulticastRequest = ^TMulticastRequest;
ip_mreq = record
Note: Argument structure for IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP | |
IMRMultiAddr : TInAddr;
|
IP multicast address of group |
IMRInterface : TInAddr;
|
local IP address of interface |
WSA interface row
TWSAIfRow = WSA_IFROW;
PWSAIfRow = PWSA_IFROW;
PWSA_IFROW = ^WSA_IFROW;
WSA_IFROW = record
Note: Structures for WsControlEx (Note: Must be same as IP Helper) | |
wszName: array [0..WSA_MAX_INTERFACE_NAME_LEN - 1] of WideChar;
|
|
dwIndex: DWORD;
|
|
dwType: DWORD;
|
|
dwMtu: DWORD;
|
|
dwSpeed: DWORD;
|
|
dwPhysAddrLen: DWORD;
|
|
bPhysAddr: array [0..WSA_MAXLEN_PHYSADDR - 1] of Byte;
|
|
dwAdminStatus: DWORD;
|
|
dwOperStatus: DWORD;
|
|
dwLastChange: DWORD;
|
|
dwInOctets: DWORD;
|
|
dwInUcastPkts: DWORD;
|
|
dwInNUcastPkts: DWORD;
|
|
dwInDiscards: DWORD;
|
|
dwInErrors: DWORD;
|
|
dwInUnknownProtos: DWORD;
|
|
dwOutOctets: DWORD;
|
|
dwOutUcastPkts: DWORD;
|
|
dwOutNUcastPkts: DWORD;
|
|
dwOutDiscards: DWORD;
|
|
dwOutErrors: DWORD;
|
|
dwOutQLen: DWORD;
|
|
dwDescrLen: DWORD;
|
|
bDescr: array[0..WSA_MAXLEN_IFDESCR - 1] of Byte;
|
WSA interface table
TWSAIftable = WSA_IFTABLE;
PWSAIftable = PWSA_IFTABLE;
PWSA_IFTABLE = ^WSA_IFTABLE;
WSA_IFTABLE = record
dwNumEntries: DWORD;
|
|
table: array [0..WSA_ANY_SIZE - 1] of WSA_IFROW;
|
WSA ICMP statistics
TWSAIcmpStats = WSAICMPSTATS;
PWSAIcmpStats = ^TWSAIcmpStats;
WSAICMPSTATS = record
dwMsgs: DWORD;
|
|
dwErrors: DWORD;
|
|
dwDestUnreachs: DWORD;
|
|
dwTimeExcds: DWORD;
|
|
dwParmProbs: DWORD;
|
|
dwSrcQuenchs: DWORD;
|
|
dwRedirects: DWORD;
|
|
dwEchos: DWORD;
|
|
dwEchoReps: DWORD;
|
|
dwTimestamps: DWORD;
|
|
dwTimestampReps: DWORD;
|
|
dwAddrMasks: DWORD;
|
|
dwAddrMaskReps: DWORD;
|
WSA ICMP information
TWSAIcmpInfo = WSAICMPINFO;
PWSAIcmpInfo = ^TWSAIcmpInfo;
WSAICMPINFO = record
icmpInStats: WSAICMPSTATS;
|
|
icmpOutStats: WSAICMPSTATS;
|
WSA ICMP
TWSAIcmp = WSA_ICMP;
PWSAIcmp = PWSA_ICMP;
PWSA_ICMP = ^WSA_ICMP;
WSA_ICMP = record
stats: WSAICMPINFO;
|
WSA UDP statistics
TWSAUdpStats = WSA_UDPSTATS;
PWSAUdpStats = PWSA_UDPSTATS;
PWSA_UDPSTATS = ^WSA_UDPSTATS;
WSA_UDPSTATS = record
dwInDatagrams: DWORD;
|
|
dwNoPorts: DWORD;
|
|
dwInErrors: DWORD;
|
|
dwOutDatagrams: DWORD;
|
|
dwNumAddrs: DWORD;
|
WSA UDP row
TWSAUdpRow = WSA_UDPROW;
PWSAUdpRow = PWSA_UDPROW;
PWSA_UDPROW = ^WSA_UDPROW;
WSA_UDPROW = record
dwLocalAddr: DWORD;
|
|
dwLocalPort: DWORD;
|
WSA UDP table
TWSAUdpTable = WSA_UDPTABLE;
PWSAUdpTable = PWSA_UDPTABLE;
PWSA_UDPTABLE = ^WSA_UDPTABLE;
WSA_UDPTABLE = record
dwNumEntries: DWORD;
|
|
table: array [0..WSA_ANY_SIZE - 1] of WSA_UDPROW;
|
WSA TCP statistics
TWSATcpStats = WSA_TCPSTATS;
PWSATcpStats = PWSA_TCPSTATS;
PWSA_TCPSTATS = ^WSA_TCPSTATS;
WSA_TCPSTATS = record
dwRtoAlgorithm: DWORD;
|
|
dwRtoMin: DWORD;
|
|
dwRtoMax: DWORD;
|
|
dwMaxConn: DWORD;
|
|
dwActiveOpens: DWORD;
|
|
dwPassiveOpens: DWORD;
|
|
dwAttemptFails: DWORD;
|
|
dwEstabResets: DWORD;
|
|
dwCurrEstab: DWORD;
|
|
dwInSegs: DWORD;
|
|
dwOutSegs: DWORD;
|
|
dwRetransSegs: DWORD;
|
|
dwInErrs: DWORD;
|
|
dwOutRsts: DWORD;
|
|
dwNumConns: DWORD;
|
WSA TCP row
TWSATcpRow = WSA_TCPROW;
PWSATcpRow = PWSA_TCPROW;
PWSA_TCPROW = ^WSA_TCPROW;
WSA_TCPROW = record
dwState: DWORD;
|
|
dwLocalAddr: DWORD;
|
|
dwLocalPort: DWORD;
|
|
dwRemoteAddr: DWORD;
|
|
dwRemotePort: DWORD;
|
WSA TCP table
TWSATcpTable = WSA_TCPTABLE;
PWSATcpTable = PWSA_TCPTABLE;
PWSA_TCPTABLE = ^WSA_TCPTABLE;
WSA_TCPTABLE = record
dwNumEntries: DWORD;
|
|
table: array [0..WSA_ANY_SIZE - 1] of WSA_TCPROW;
|
WSA IP statistics
TWSAIpStats = WSA_IPSTATS;
PWSAIpStats = PWSA_IPSTATS;
PWSA_IPSTATS = ^WSA_IPSTATS;
WSA_IPSTATS = record
dwForwarding: DWORD;
|
|
dwDefaultTTL: DWORD;
|
|
dwInReceives: DWORD;
|
|
dwInHdrErrors: DWORD;
|
|
dwInAddrErrors: DWORD;
|
|
dwForwDatagrams: DWORD;
|
|
dwInUnknownProtos: DWORD;
|
|
dwInDiscards: DWORD;
|
|
dwInDelivers: DWORD;
|
|
dwOutRequests: DWORD;
|
|
dwRoutingDiscards: DWORD;
|
|
dwOutDiscards: DWORD;
|
|
dwOutNoRoutes: DWORD;
|
|
dwReasmTimeout: DWORD;
|
|
dwReasmReqds: DWORD;
|
|
dwReasmOks: DWORD;
|
|
dwReasmFails: DWORD;
|
|
dwFragOks: DWORD;
|
|
dwFragFails: DWORD;
|
|
dwFragCreates: DWORD;
|
|
dwNumIf: DWORD;
|
|
dwNumAddr: DWORD;
|
|
dwNumRoutes: DWORD;
|
WSA IP address row
TWSAIpAddrRow = WSA_IPADDRROW;
PWSAIpAddrRow = PWSA_IPADDRROW;
PWSA_IPADDRROW = ^WSA_IPADDRROW;
WSA_IPADDRROW = record
dwAddr: DWORD;
|
|
dwIndex: DWORD;
|
|
dwMask: DWORD;
|
|
dwBCastAddr: DWORD;
|
|
dwReasmSize: DWORD;
|
|
unused1: Word;
|
|
unused2: Word;
|
WSA IP address table
TWSAIpAddrTable = WSA_IPADDRTABLE;
PWSAIpAddrTable = PWSA_IPADDRTABLE;
PWSA_IPADDRTABLE = ^WSA_IPADDRTABLE;
WSA_IPADDRTABLE = record
dwNumEntries: DWORD;
|
|
table: array [0..WSA_ANY_SIZE - 1] of WSA_IPADDRROW;
|
WSA IP forward number
TWSAIpForwardNumber = WSA_IPFORWARDNUMBER;
PWSAIpForwardNumber = PWSA_IPFORWARDNUMBER;
PWSA_IPFORWARDNUMBER = ^WSA_IPFORWARDNUMBER;
WSA_IPFORWARDNUMBER = record
dwValue: DWORD;
|
WSA IP forward row
TWSAIpForwardRow = WSA_IPFORWARDROW;
PWSAIpForwardRow = PWSA_IPFORWARDROW;
PWSA_IPFORWARDROW = ^WSA_IPFORWARDROW;
WSA_IPFORWARDROW = record
dwForwardDest: DWORD;
|
|
dwForwardMask: DWORD;
|
|
dwForwardPolicy: DWORD;
|
|
dwForwardNextHop: DWORD;
|
|
dwForwardIfIndex: DWORD;
|
|
dwForwardType: DWORD;
|
|
dwForwardProto: DWORD;
|
|
dwForwardAge: DWORD;
|
|
dwForwardNextHopAS: DWORD;
|
|
dwForwardMetric1: DWORD;
|
|
dwForwardMetric2: DWORD;
|
|
dwForwardMetric3: DWORD;
|
|
dwForwardMetric4: DWORD;
|
|
dwForwardMetric5: DWORD;
|
WSA IP forward table
TWSAIpForwardTable = WSA_IPFORWARDTABLE;
PWSAIpForwardTable = PWSA_IPFORWARDTABLE;
PWSA_IPFORWARDTABLE = ^WSA_IPFORWARDTABLE;
WSA_IPFORWARDTABLE = record
dwNumEntries: DWORD;
|
|
table: array [0..WSA_ANY_SIZE - 1] of WSA_IPFORWARDROW;
|
WSA IP net row
TWSAIpNetRow = WSA_IPNETROW;
PWSAIpNetRow = PWSA_IPNETROW;
PWSA_IPNETROW = ^WSA_IPNETROW;
WSA_IPNETROW = record
dwIndex: DWORD;
|
|
dwPhysAddrLen: DWORD;
|
|
bPhysAddr: array [0..WSA_MAXLEN_PHYSADDR - 1] of BYTE;
|
|
dwAddr: DWORD;
|
|
dwType: DWORD;
|
WSA IP net table
TWSAIpNetTable = WSA_IPNETTABLE;
PWSAIpNetTable = PWSA_IPNETTABLE;
PWSA_IPNETTABLE = ^WSA_IPNETTABLE;
WSA_IPNETTABLE = record
dwNumEntries: DWORD;
|
|
table: array [0..WSA_ANY_SIZE - 1] of WSA_IPNETROW;
|
WSA IP adapter index map
TWSAIpAdapterIndexMap = WSA_IP_ADAPTER_INDEX_MAP;
PWSAIpAdapterIndexMap = PWSA_IP_ADAPTER_INDEX_MAP;
PWSA_IP_ADAPTER_INDEX_MAP = ^WSA_IP_ADAPTER_INDEX_MAP;
WSA_IP_ADAPTER_INDEX_MAP = record
Index: ULONG;
|
|
Name: array [0..WSA_MAX_ADAPTER_NAME - 1] of WideChar;
|
WSA IP interface information
TWSAIpInterfaceInfo = WSA_IP_INTERFACE_INFO;
PWSAIpInterfaceInfo = PWSA_IP_INTERFACE_INFO;
PWSA_IP_INTERFACE_INFO = ^WSA_IP_INTERFACE_INFO;
WSA_IP_INTERFACE_INFO = record
NumAdapters: DWORD;
|
LongInt |
Adapter: array [0..0] of WSA_IP_ADAPTER_INDEX_MAP;
|
WSA IP address string
PWSA_IP_ADDRESS_STRING = ^WSA_IP_ADDRESS_STRING;
WSA_IP_MASK_STRING = WSA_IP_ADDRESS_STRING;
TWSAIpAddressString = WSA_IP_ADDRESS_STRING;
PWSAIpAddressString = PWSA_IP_MASK_STRING;
PWSA_IP_MASK_STRING = ^WSA_IP_MASK_STRING;
WSA_IP_ADDRESS_STRING = record
S: array [0..15] of Char;
|
WSA IP address string
TWSAIpAddrString = WSA_IP_ADDR_STRING;
PWSAIpAddrString = PWSA_IP_ADDR_STRING;
PWSA_IP_ADDR_STRING = ^WSA_IP_ADDR_STRING;
WSA_IP_ADDR_STRING = record
Next: PWSA_IP_ADDR_STRING;
|
|
IpAddress: WSA_IP_ADDRESS_STRING;
|
|
IpMask: WSA_IP_MASK_STRING;
|
|
Context: DWORD;
|
WSA IP adapter information
TWSAIpAdapterInfo = WSA_IP_ADAPTER_INFO;
PWSAIpAdapterInfo = PWSA_IP_ADAPTER_INFO;
PWSA_IP_ADAPTER_INFO = ^WSA_IP_ADAPTER_INFO;
WSA_IP_ADAPTER_INFO = record
Next: PWSA_IP_ADAPTER_INFO;
|
|
ComboIndex: DWORD;
|
|
AdapterName: array [0..WSA_MAX_ADAPTER_NAME_LENGTH + 3] of Char;
|
|
Description: array [0..WSA_MAX_ADAPTER_DESCRIPTION_LENGTH + 3] of Char;
|
|
AddressLength: UINT;
|
|
Address: array [0..WSA_MAX_ADAPTER_ADDRESS_LENGTH - 1] of BYTE;
|
|
Index: DWORD;
|
|
Type_: UINT;
|
|
DhcpEnabled: UINT;
|
|
CurrentIpAddress: PWSA_IP_ADDR_STRING;
|
|
IpAddressList: WSA_IP_ADDR_STRING;
|
|
GatewayList: WSA_IP_ADDR_STRING;
|
|
DhcpServer: WSA_IP_ADDR_STRING;
|
|
HaveWins: BOOL;
|
|
PrimaryWinsServer: WSA_IP_ADDR_STRING;
|
|
SecondaryWinsServer: WSA_IP_ADDR_STRING;
|
|
LeaseObtained: time_t;
|
|
LeaseExpires: time_t;
|
WSA fixed information
TWSAFixedInfo = WSA_FIXED_INFO;
PWSAFixedInfo = PWSA_FIXED_INFO;
PWSA_FIXED_INFO = ^WSA_FIXED_INFO;
WSA_FIXED_INFO = record
HostName: array [0..WSA_MAX_HOSTNAME_LEN + 3] of Char;
|
|
DomainName: array[0..WSA_MAX_DOMAIN_NAME_LEN + 3] of Char;
|
|
CurrentDnsServer: PWSA_IP_ADDR_STRING;
|
|
DnsServerList: WSA_IP_ADDR_STRING;
|
|
NodeType: UINT;
|
|
ScopeId: array [0..WSA_MAX_SCOPE_ID_LEN + 3] of Char;
|
|
EnableRouting: UINT;
|
|
EnableProxy: UINT;
|
|
EnableDns: UINT;
|
Net to address
PNetToAddr = ^TNetToAddr;
|
|
TNetToAddr = array[0..MAX_NAME_SIZE - 1] of Char;
|
WSA binding
TWSABinding = WSABinding;
PWSABinding = ^TWSABinding;
WSABinding = record
Note: A network Binding (Address) | |
Version: Word;
|
|
ConfigType: Word;
|
|
ConfigServer: TInAddr;
|
|
BindingAddress: TInAddr;
|
|
BindingNetmask: TInAddr;
|
|
BindingGateway: TInAddr;
|
|
NextBinding: PWSABinding;
|
WSA provider
TWSAProvider = WSAProvider;
PWSAProvider = ^TWSAProvider;
WSAProvider = record
Note: A network Provider (Transport) | |
Version: Word;
|
|
TransportFamily: Word;
|
|
TransportType: Word;
|
|
TransportHandle: Pointer;
|
|
ConfigType: Word;
|
|
ConfigServer: TInAddr;
|
|
ProviderAddress: TInAddr;
|
|
ProviderNetmask: TInAddr;
|
|
ProviderGateway: TInAddr;
|
|
ProviderName: array[0..MAX_NAME_SIZE] of Char;
|
|
NextProvider: PWSAProvider;
|
WSA interface
TWSAInterface = WSAInterface;
PWSAInterface = ^TWSAInterface;
WSAInterface = record
Note: A network Interface (Adapter) | |
Version: Word;
|
|
AdapterType: Word;
|
|
AdapterInt: Word;
|
|
AdapterPort: Word;
|
|
AdapterName: array[0..MAX_NAME_SIZE] of Char;
|
|
AdapterHandle: Pointer;
|
|
FirstProvider: PWSAProvider;
|
|
NextInterface: PWSAInterface;
|
WSA configuration
TWSAConfig = WSAConfig;
PWSAConfig = ^TWSAConfig;
WSAConfig = record
Note: General Network Configuration | |
Version: Word;
|
|
Hostname: array[0..MAX_NAME_SIZE - 1] of Char;
|
|
Namesuffix: array[0..MAX_NAME_SIZE - 1] of Char;
|
|
Nameservers: array[0..MAX_NAME_SERVERS - 1] of TInAddr;
|
|
FirstInterface: PWSAInterface;
|
WSA network binding
TWSAExtendedBinding = WSAExtendedBinding;
PWSAExtendedBinding = ^TWSAExtendedBinding;
WSAExtendedBinding = record
Note: A network Binding (Address) | |
Size: LongWord;
|
|
Version: Word;
|
|
ConfigType: Word;
|
|
ConfigServer: TInAddr;
|
|
ConfigServer6: TIn6Addr;
|
|
ConfigInitDelay: LongWord;
|
|
ConfigRetryCount: LongWord;
|
|
ConfigRetryTimeout: LongWord;
|
|
BindingAddress: TInAddr;
|
|
BindingNetmask: TInAddr;
|
|
BindingGateway: TInAddr;
|
|
BindingAddress6: TIn6Addr;
|
|
BindingNetmask6: TIn6Addr;
|
|
BindingGateway6: TIn6Addr;
|
|
Namesuffix: array[0..MAX_NAME_SIZE - 1] of Char;
|
|
Nameservers: array[0..MAX_NAME_SERVERS - 1] of TInAddr;
|
|
Nameservers6: array[0..MAX_NAME_SERVERS - 1] of TIn6Addr;
|
|
NextBinding: PWSAExtendedBinding;
|
WSA network provider
TWSAExtendedProvider = WSAExtendedProvider;
PWSAExtendedProvider = ^TWSAExtendedProvider;
WSAExtendedProvider = record
Note: A network Provider (Transport) | |
Size: LongWord;
|
|
Version: Word;
|
|
TransportFamily: Word;
|
|
TransportType: Word;
|
|
TransportHandle: Pointer;
|
|
ProviderName: array[0..MAX_NAME_SIZE] of Char;
|
|
FirstBinding: PWSAExtendedBinding;
|
|
NextProvider: PWSAExtendedProvider;
|
WSA network interface
TWSAExtendedInterface = WSAExtendedInterface;
PWSAExtendedInterface = ^TWSAExtendedInterface;
WSAExtendedInterface = record
Note: A network Interface (Adapter) | |
Size: LongWord;
|
|
Version: Word;
|
|
AdapterType: Word;
|
|
AdapterInt: Word;
|
|
AdapterPort: Word;
|
|
AdapterName: array[0..MAX_NAME_SIZE] of Char;
|
|
AdapterHandle: Pointer;
|
|
FirstProvider: PWSAExtendedProvider;
|
|
NextInterface: PWSAExtendedInterface;
|
WSA network configuration
TWSAExtendedConfig = WSAExtendedConfig;
PWSAExtendedConfig = ^TWSAExtendedConfig;
WSAExtendedConfig = record
Note: General Network Configuration | |
Size: LongWord;
|
|
Version: Word;
|
|
Hostname: array[0..MAX_NAME_SIZE - 1] of Char;
|
|
FirstInterface: PWSAExtendedInterface;
|
Address information
PAddrInfo = ^TAddrInfo;
TAddrInfo = record
Note: Structure used in getaddrinfo() call | |
ai_flags:LongInt;
|
AI_PASSIVE, AI_CANONNAME, AI_NUMERICHOST |
ai_family:LongInt;
|
PF_xxx |
ai_socktype:LongInt;
|
SOCK_xxx |
ai_protocol:LongInt;
|
0 or IPPROTO_xxx for IPv4 and IPv6 |
ai_addrlen:size_t;
|
Length of ai_addr |
ai_canonname:PChar;
|
Canonical name for nodename |
ai_addr:PSockAddr;
|
Binary address |
ai_next:PAddrInfo;
|
Next structure in linked list |
Public variables
None defined
Function declarations
Global socket functions
procedure FD_CLR(Socket: TSocket; var FDSet: TFDSet);
Note | None documented |
---|
function FD_ISSET(Socket: TSocket; var FDSet: TFDSet): Boolean;
Note | None documented |
---|
procedure FD_SET(Socket: TSocket; var FDSet: TFDSet);
Note | None documented |
---|
procedure FD_ZERO(var FDSet: TFDSet);
Note | None documented |
---|
function SequenceLT(A,B:LongInt):Boolean; inline;
Note | None documented |
---|
function SequenceLEQ(A,B:LongInt):Boolean; inline;
Note | None documented |
---|
function SequenceGT(A,B:LongInt):Boolean; inline;
Note | None documented |
---|
function SequenceGEQ(A,B:LongInt):Boolean; inline;
Note | None documented |
---|
function ProtocolToString(Protocol:Word):String;
Note | None documented |
---|
Return to Unit Reference