Unit DeviceTree
From Ultibo.org
Return to Unit Reference
Description
Ultibo Flattened Device Tree (DTB) interface unit
Using Device Tree Blob (DTB) files for passing configuration information to the Linux kernel is now widely accepted as the standard method of providing platform specific information without it needing to be hard coded into the kernel at build time.
With this adoption of device tree by Linux it is becoming increasingly common for the only source of information about the runtime configuration of specific hardware to be found in the blob loaded and configured during startup by the firmware and passed to the kernel at the beginning of the boot process.
While Ultibo targets a much smaller range of devices than Linux and does not need the generic kernel model it still requires detailed configuration information in order to be able to interface with the full range of available devices.
It can also benefit from the ability to adapt to the runtime environment by checking for known device tree parameters while registering and initializing hardware and devices. Use of device tree is considered optional and Ultibo will operate correctly with or without the information provided, however some devices may be forced to operate in a fall back or default mode without the complete configuration.
Constants
DTB signature
DTB_* DTB_MAGIC = $D00DFEED;
|
DTB version
DTB_VERSION_* DTB_VERSION_17 = 17;
|
|
DTB_VERSION_16 = 16;
|
|
DTB_VERSION_CURRENT = DTB_VERSION_17;
|
|
DTB_VERSION_COMPATIBLE = DTB_VERSION_16;
|
|
DTB token
DTB_*_NODE DTB_BEGIN_NODE = $00000001;
|
The FDT_BEGIN_NODE token marks the beginning of a node’s representation, followed by the node’s unit name as extra data. |
DTB_END_NODE = $00000002;
|
The FDT_END_NODE token marks the end of a node’s representation |
DTB_PROP = $00000003;
|
The FDT_PROP token marks the beginning of the representation of one property, followed by extra data describing the property. |
DTB_NOP = $00000004;
|
The FDT_NOP token will be ignored by any program parsing the device tree |
DTB_END = $00000009;
|
The FDT_END token marks the end of the structure block |
DTB offset
DTB_*_OFFSET DTB_NODE_OFFSET = 4;
|
Token |
DTB_PROPERTY_OFFSET = 12;
|
Token + Value Length + Name Offset |
DTB alignment
DTB_*_ALIGNMENT DTB_STRUCTURE_ALIGNMENT = 4;
|
|
DTB_RESERVATION_ALIGNMENT = 8;
|
DTB node
DTB_NODE_* | Standard nodes | |
DTB_NODE_ROOT = '/';
|
|
DTB_NODE_CPUS = 'cpus';
|
|
DTB_NODE_MEMORY = 'memory';
|
|
DTB_NODE_CHOSEN = 'chosen';
|
|
DTB_NODE_ALIASES = 'aliases';
|
|
| Other nodes | |
DTB_NODE_SYMBOLS = '__symbols__';
|
|
DTB_NODE_OVERRIDES = '__overrides__';
|
|
DTB path
DTB_PATH_* DTB_PATH_SEPARATOR = '/';
|
DTB type
DTB_TYPE_* DTB_TYPE_UNKNOWN = 0;
|
|
DTB_TYPE_EMPTY = 1;
|
Value is empty. Used for conveying true-false information. |
DTB_TYPE_U32 = 2;
|
A 32-bit integer in big-endian format |
DTB_TYPE_U64 = 3;
|
Represents a 64-bit integer in big-endian format |
DTB_TYPE_STRING = 4;
|
Strings are printable and null-terminated |
DTB_TYPE_ENCODED_ARRAY = 5;
|
Format is specific to the property. See the property definition. |
DTB_TYPE_PHANDLE = 6;
|
A <u32> value. A phandle value is a way to reference another node in the devicetree. |
DTB_TYPE_STRINGLIST = 7;
|
A list of <string> values concatenated together |
DTB properties
DTB_PROPERTY_* | Standard properties | |
DTB_PROPERTY_COMPATIBLE = 'compatible';
|
The compatible property value consists of one or more strings that define the specific programming model for the device (Type: <stringlist>) |
DTB_PROPERTY_MODEL = 'model';
|
The model property value specifies the manufacturer’s model number of the device (Type: <string>) |
DTB_PROPERTY_PHANDLE = 'phandle';
|
The phandle property specifies a numerical identifier for a node that is unique within the devicetree (Type: <u32>) |
DTB_PROPERTY_STATUS = 'status';
|
The status property indicates the operational status of a device (Type: <string>) |
DTB_PROPERTY_ADDRESS_CELLS = '#address-cells';
|
Specifies the number of <u32> cells to represent the address in the reg property (Type: <u32>) |
DTB_PROPERTY_SIZE_CELLS = '#size-cells';
|
Specifies the number of <u32> cells to represent the size in the reg property (Type: <u32>) |
DTB_PROPERTY_REG = 'reg';
|
The reg property describes the address of the device’s resources within the address space defined by its parent bus (Type: <prop-encoded-array>) |
DTB_PROPERTY_VIRTUAL_REG = 'virtual-reg';
|
The virtual-reg property specifies an effective address that maps to the first physical address specified in the reg property of the device node (Type: <u32>) |
DTB_PROPERTY_RANGES = 'ranges';
|
The ranges property provides a means of defining a mapping or translation between address spaces (Type: <empty> or <prop-encoded-array>) |
DTB_PROPERTY_DMA_RANGES = 'dma-ranges';
|
The dma-ranges property is used to describe the direct memory access (DMA) structure of a memory-mapped bus (Type: <empty> or <prop-encoded-array>) |
DTB_PROPERTY_NAME = 'name';
|
The name property is a string specifying the name of the node (Type: <string>) |
DTB_PROPERTY_DEVICE_TYPE = 'device_type';
|
The device_type property was used in IEEE 1275 to describe the device (Type: <string>) |
| Additional properties for Interrupt Generating Devices | |
DTB_PROPERTY_INTERRUPTS = 'interrupts';
|
The interrupts property defines the interrupt or interrupts that are generated by the device (Type: <prop-encoded-array>) |
DTB_PROPERTY_INTERRUPT_PARENT = 'interrupt-parent';
|
The interrupt-parent property provides an explicit definition of an interrupt parent (Type: <phandle>) |
DTB_PROPERTY_INTERRUPTS_EXTENDED = 'interrupts-extended';
|
The interrupts-extended property lists the interrupt(s) generated by a device (Type: <phandle> <prop-encoded-array>) |
| Additional properties for Interrupt Controllers | |
DTB_PROPERTY_INTERRUPT_CELLS = '#interrupt-cells';
|
The #interrupt-cells property defines the number of cells required to encode an interrupt specifier for an interrupt domain (Type: <u32>) |
DTB_PROPERTY_INTERRUPT_CONTROLLER = 'interrupt-controller';
|
The presence of an interrupt-controller property defines a node as an interrupt controller node (Type: <empty>) |
| Additional Interrupt Nexus properties | |
DTB_PROPERTY_INTERRUPT_MAP = 'interrupt-map';
|
An interrupt-map is a property on a nexus node that bridges an interrupt domain to a parent domain (Type: <prop-encoded-array>) |
DTB_PROPERTY_INTERRUPT_MAP_MASK = 'interrupt-map-mask';
|
An interrupt-map-mask property is specified for a nexus node in the interrupt tree (Type: <prop-encoded-array>) |
| Additional Memory Node properties | |
DTB_PROPERTY_INITIAL_MAPPED_AREA = 'initial-mapped-area';
|
Specifies the address and size of the Initial Mapped Area (Type: <prop-encoded-array>) |
| Additional Chosen Node properties | |
DTB_PROPERTY_BOOTARGS = 'bootargs';
|
A string that specifies the boot arguments for the client program (Type: <string>>) |
DTB_PROPERTY_STDOUT_PATH = 'stdout-path';
|
A string that specifies the full path to the node representing the device to be used for boot console output (Type: <string>>) |
DTB_PROPERTY_STDIN_PATH = 'stdin-path';
|
A string that specifies the full path to the node representing the device to be used for boot console input (Type: <string>>) |
DTB_PROPERTY_INITRD_START = 'initrd-start';
|
The starting address of the initial ram disk (Type: <u32>) |
DTB_PROPERTY_INITRD_END = 'initrd-end';
|
The ending address of the initial ram disk (Type: <u32>) |
| Additional CPUs Node properties | |
DTB_PROPERTY_CLOCK_FREQUENCY = 'clock-frequency';
|
Specifies the current clock speed of the CPU in Hertz (Type: <prop-encoded-array>) |
DTB_PROPERTY_TIMEBASE_FREQUENCY = 'timebase-frequency';
|
Specifies the current frequency at which the timebase and decrementer registers are updated (Type: <propencoded-array>) |
DTB_PROPERTY_ENABLE_METHOD = 'enable-method';
|
Describes the method by which a CPU in a disabled state is enabled (Type: <stringlist>) |
DTB_PROPERTY_CPU_RELEASE_ADDR = 'cpu-release-addr';
|
The cpu-release-addr property is required for cpu nodes that have an enable-method property value of "spin-table" (Type: <u64>) |
DTB_PROPERTY_POWER_ISA_VERSION = 'power-isa-version';
|
A string that specifies the numerical portion of the Power ISA version string (Type: <string>) |
DTB_PROPERTY_CACHE_OP_BLOCK_SIZE = 'cache-op-block-size';
|
The block size in bytes upon which cache block instructions operate (Type: <u32>) |
DTB_PROPERTY_RESERVATION_GRANULE_SIZE = 'reservation-granule-size';
|
The reservation granule size supported by this processor in bytes (Type: <u32>) |
DTB_PROPERTY_MMU_TYPE = 'mmu-type';
|
Specifies the CPU’s MMU type (Type: <string>) |
DTB_PROPERTY_TLB_SPLIT = 'tlb-split';
|
Specifies that the TLB has a split configuration (Type: <empty>) |
DTB_PROPERTY_TLB_SIZE = 'tlb-size';
|
Specifies the number of entries in the TLB (Type: <u32>) |
DTB_PROPERTY_TLB_SETS = 'tlb-sets';
|
Specifies the number of associativity sets inthe TLB (Type: <u32>) |
DTB_PROPERTY_D_TLB_SIZE = 'd-tlb-size';
|
Specifies the number of entries in the data TLB (Type: <u32>) |
DTB_PROPERTY_D_TLB_SETS = 'd-tlb-sets';
|
Specifies the number of associativity sets in the data TLB (Type: <u32>) |
DTB_PROPERTY_I_TLB_SIZE = 'i-tlb-size';
|
Specifies the number of entries in the instruction TLB (Type: <u32>) |
DTB_PROPERTY_I_TLB_SETS = 'i-tlb-sets';
|
Specifies the number of associativity sets in the instruction TLB (Type: <u32>) |
DTB_PROPERTY_CACHE_UNIFIED = 'cache-unified';
|
Specifies the cache has a unified organization (Type: <empty>) |
DTB_PROPERTY_CACHE_SIZE = 'cache-size';
|
Specifies the size in bytes of a unified cache (Type: <u32>) |
DTB_PROPERTY_CACHE_SETS = 'cache-sets';
|
Specifies the number of associativity sets in a unified cache (Type: <u32>) |
DTB_PROPERTY_CACHE_BLOCK_SIZE = 'cache-block-size';
|
Specifies the block size in bytes of a unified cache (Type: <u32>) |
DTB_PROPERTY_CACHE_LINE_SIZE = 'cache-line-size';
|
Specifies the line size in bytes of a unified cache (Type: <u32>) |
DTB_PROPERTY_I_CACHE_SIZE = 'i-cache-size';
|
Specifies the size in bytes of the instruction cache (Type: <u32>) |
DTB_PROPERTY_I_CACHE_SETS = 'i-cache-sets';
|
Specifies the number of associativity sets in the instruction cache (Type: <u32>) |
DTB_PROPERTY_I_CACHE_BLOCK_SIZE = 'i-cache-block-size';
|
Specifies the block size in bytes of the instruction cache (Type: <u32>) |
DTB_PROPERTY_I_CACHE_LINE_SIZE = 'i-cache-line-size';
|
Specifies the line size in bytes of the instruction cache (Type: <u32>) |
DTB_PROPERTY_D_CACHE_SIZE = 'd-cache-size';
|
Specifies the size in bytes of the data cache (Type: <u32>) |
DTB_PROPERTY_D_CACHE_SETS = 'd-cache-sets';
|
Specifies the number of associativity sets in the data cache (Type: <u32>) |
DTB_PROPERTY_D_CACHE_BLOCK_SIZE = 'd-cache-block-size';
|
Specifies the block size in bytes of the data cache (Type: <u32>) |
DTB_PROPERTY_D_CACHE_LINE_SIZE = 'd-cache-line-size';
|
Specifies the line size in bytes of the data cache (Type: <u32>) |
DTB_PROPERTY_NEXT_LEVEL_CACHE = 'next-level-cache';
|
If present, indicates that another level of cache exists. (Type: <phandle>) |
DTB_PROPERTY_CACHE_LEVEL = 'cache-level';
|
Specifies the level in the cache hierarchy (Type: <u32>) |
| Other Additional properties | |
DTB_PROPERTY_SERIAL_NUMBER = 'serial-number';
|
Serial Number (Type: <string>) |
DTB_PROPERTY_ALLOC_RANGES = 'alloc-ranges';
|
Allocated Ranges (Type: <prop-encoded-array>) |
DTB_PROPERTY_RESETS = 'resets';
|
Resets (Type: <prop-encoded-array>) |
DTB_PROPERTY_CLOCK_CELLS = '#clock-cells';
|
Number of clock cells (Type: <u32>) |
DTB_PROPERTY_LINUX_INITRD_START = 'linux,initrd-start';
|
The starting address of the initial ram disk (Type: <u32>) |
DTB_PROPERTY_LINUX_INITRD_END = 'linux,initrd-end';
|
The ending address of the initial ram disk (Type: <u32>) |
DTB property type
DTB_*_PROPERTY_TYPE* DTB_MAX_PROPERTY_TYPE = 60;
|
Type definitions
DTB header
PDTBHeader = ^TDTBHeader;
TDTBHeader = packed record
Magic:LongWord;
|
The value 0xd00dfeed (big-endian) |
TotalSize:LongWord;
|
The total size in bytes of the devicetree data structure (big-endian) |
StructureOffset:LongWord;
|
The offset in bytes of the structure block from the beginning of the header (big-endian) |
StringsOffset:LongWord;
|
The offset in bytes of the strings block from the beginning of the header (big-endian) |
ReservationOffset:LongWord;
|
The offset in bytes of the memory reservation block from the beginning of the header (big-endian) |
Version:LongWord;
|
The version of the devicetree data structure (big-endian) |
CompatibleVersion:LongWord;
|
The lowest version of the devicetree data structure with which the version used is backwards compatible (big-endian) |
BootCPUID:LongWord;
|
The physical ID of the system’s boot CPU (big-endian) |
StringsSize:LongWord;
|
The length in bytes of the strings block section of the devicetree blob (big-endian) |
StructureSize:LongWord;
|
The length in bytes of the structure block section of the devicetree blob (big-endian) |
DTB reservation
PDTBReservation = ^TDTBReservation;
TDTBReservation = packed record
Address:UInt64;
|
Physical address of a reserved memory region |
Size:UInt64;
|
Size in bytes of a reserved memory region |
DTB node
PDTBNode = ^TDTBNode;
TDTBNode = packed record
Token:LongWord;
|
Token (big-endian) |
Name:array[0..0] of Char;
|
The name stored as a null-terminated string, shall include the unit address if any. |
DTB property
PDTBProperty = ^TDTBProperty;
TDTBProperty = packed record
Token:LongWord;
|
Token (big-endian) |
ValueLength:LongWord;
|
The length of the property value in bytes |
NameOffset:LongWord;
|
The offset into the strings block of the property name stored as a null-terminated string |
Value:array[0..0] of Byte;
|
The property value as an array of bytes of value length |
DTB property char
PDTBPropertyChar = ^TDTBPropertyChar;
TDTBPropertyChar = packed record
Token:LongWord;
|
Token (big-endian) |
ValueLength:LongWord;
|
The length of the property value in bytes |
NameOffset:LongWord;
|
The offset into the strings block of the property name stored as a null-terminated string |
Value:array[0..0] of Char;
|
The property value as a string of value length |
DTB property longWord
PDTBPropertyLongWord = ^TDTBPropertyLongWord;
TDTBPropertyLongWord = packed record
Token:LongWord;
|
Token (big-endian) |
ValueLength:LongWord;
|
The length of the property value in bytes |
NameOffset:LongWord;
|
The offset into the strings block of the property name stored as a null-terminated string |
Value:array[0..0] of LongWord;
|
The property value as an array of longwords of value length (big-endian) |
DTB property quadWord
PDTBPropertyQuadWord = ^TDTBPropertyQuadWord;
TDTBPropertyQuadWord = packed record
Token:LongWord;
|
Token (big-endian) |
ValueLength:LongWord;
|
The length of the property value in bytes |
NameOffset:LongWord;
|
The offset into the strings block of the property name stored as a null-terminated string |
Value:array[0..0] of UInt64;
|
The property value as an array of quadwords of value length (big-endian) |
DTB property type
TDTBPropertyType = record
Name:String;
|
|
Encoding:LongWord;
|
DTB logoutput
TDTBLogOutput = procedure(const AText:String; Data:Pointer);
|
DTB code value
TDTBDecodeValue = function(Node,Handle:THandle; Value:Pointer; Size:LongWord; Data:Pointer):String;
|
Public variables
None defined
Function declarations
Initialization functions
procedure DeviceTreeInit;
Description: Initialize the Device Tree unit
| Note | Called only during system startup |
|---|
Device tree functions
function DeviceTreeValidate(Address:PtrUInt; var Size:LongWord):Boolean;
Description: Check the data at the supplied address to determine if it is a valid Device Tree Blob
| Address | The address to be validated |
|---|---|
| Size | On return contains the total size of the Device Tree Blob if valid |
| Return | True if the address points to a valid Device Tree Blob, False if not. |
| Note | Does not overwrite passed Size unless the DTB is valid |
function DeviceTreeNextNode(Parent,Previous:THandle):THandle;
Description: Find the next DTB node within the Device Tree
| Parent | Handle of the parent node to search in, INVALID_HANDLE_VALUE to search the entire tree |
|---|---|
| Previous | Handle of the node to start from, INVALID_HANDLE_VALUE to start from the root node |
| Return | The handle of the next node in the tree or INVALID_HANDLE_VALUE if no node was found |
function DeviceTreeNextProperty(Node,Previous:THandle):THandle;
Description: Find the next DTB property within the specified node of the Device Tree
| Node | Handle of the node to search in |
|---|---|
| Previous | Handle of the property to start from, INVALID_HANDLE_VALUE to start from the first property |
| Return | The handle of the next property in the node or INVALID_HANDLE_VALUE if no property was found |
function DeviceTreeGetNode(const Path:String; Parent:THandle):THandle;
Description: Get the handle of the node matching the specified path, optionally within a specified parent
| Path | The path of the node to find, relative to parent node or fully qualified if parent not specified (eg /chosen or /cpus/cpu0). |
|---|---|
| Parent | Handle of the parent node to search in, INVALID_HANDLE_VALUE to search the entire tree. |
| Return | The handle of the node which matches the path or INVALID_HANDLE_VALUE if no node was found |
function DeviceTreeGetProperty(Node:THandle; const Name:String):THandle;
Description: Get the handle of the property matching the specified name
| Node | Handle of the node to search in |
|---|---|
| Name | The name of the node to find (eg compatible) |
| Return | The handle of the property which matches the name or INVALID_HANDLE_VALUE if no property was found |
function DeviceTreeGetNodeName(Handle:THandle):String;
Description: Get the name of the specified node
| Handle | The handle of the node to get the name of |
|---|---|
| Return | The name of the specified node or an empty string if the node was not valid |
procedure DeviceTreeSplitNodeName(Handle:THandle; var NodeName,UnitAddress:String);
Description: Split the name of a node into node name and unit address
| Handle | The handle of the node to split the name of |
|---|---|
| NodeName | The node name on return or an empty string if the node was not valid |
| UnitAddress | The unit address on return (If applicable) |
function DeviceTreeGetNodeParent(Handle:THandle):THandle;
Description: Get the parent node of the specified node
| Handle | The handle of the node to get the parent of |
|---|---|
| Return | The handle of the parent node or INVALID_HANDLE_VALUE if the node was not valid |
function DeviceTreeGetNodeRegCells(Handle:THandle; var Address,Size:LongWord):Boolean;
Description: Get the #address-cells and #size-cells values that apply to reg properties of the specified node
| Handle | The handle of the node to get the cell sizes for |
|---|---|
| Address | The #address-cells value on return (or the default value if not found) |
| Size | The #size-cells value on return (or the default value if not found) |
| Return | True if the cell sizes were found or False if the node was not valid |
| Note | The address and size values applicable to a given node will be those from a parent node, not those found in the node itself (if present).
Used by early stage boot stage processing which must limit the use of strings and other memory allocations. This function uses a memory compare for names. |
function DeviceTreeGetNodeRangeCells(Handle:THandle; var ParentAddress,NodeAddress,NodeSize:LongWord):Boolean;
Description: Get the #address-cells and #size-cells values that apply to range properties of the specified node
| Handle | The handle of the node to get the cell sizes for |
|---|---|
| ParentAddress | The #address-cells value from the parent on return (or the default value if not found) |
| NodeAddress | The #address-cells value from this node on return (or the default value if not found) |
| NodeSize | The #size-cells value from this node on return (or the default value if not found) |
| Return | True if the cell sizes were found or False if the node was not valid |
| Note | Range properties use the address value from the parent node and the address and size values from the node itself to determine the size of each range.
Used by early stage boot stage processing which must limit the use of strings and other memory allocations. This function uses a memory compare for names. |
function DeviceTreeGetPropertyName(Handle:THandle):String;
Description: Get the name of the specified property
| Handle | The handle of the property to get the name of |
|---|---|
| Return | The name of the specified property or an empty string if the property was not valid |
procedure DeviceTreeSplitPropertyName(Handle:THandle; var UniquePrefix,PropertyName:String);
Description: Split the name of a property into property name and unique prefix
| Handle | The handle of the property to split the name of |
|---|---|
| UniquePrefix | The unique prefix on return (If applicable) |
| PropertyName | The property name on return or an empty string if the property was not valid |
function DeviceTreeGetPropertyValue(Handle:THandle):Pointer;
Description: Get a pointer to the raw value of the specified property
| Handle | The handle of the property to get the value of |
|---|---|
| Return | A pointer to the specified property value or nil if the property was not valid |
| Note | The returned value points to the memory block where device tree is stored and should not be modified or freed |
function DeviceTreeGetPropertyLength(Handle:THandle):LongWord;
Description: Get the length of the raw value of the specified property
| Handle | The handle of the property to get the value lenth of |
|---|---|
| Return | The length of the specified property value in bytes or -1 if the property was not valid |
function DeviceTreeGetPropertyString(Handle:THandle):String;
Description: Get the value of the specified property as a string
| Handle | The handle of the property to get the value of |
|---|---|
| Return | A string representation of the value or an empty string if the property was not valid |
function DeviceTreeGetPropertyLongWord(Handle:THandle):LongWord;
Description: Get the value of the specified property as a longword
| Handle | The handle of the property to get the value of |
|---|---|
| Return | A longword representation of the value or 0 if the property was not valid |
function DeviceTreeGetPropertyQuadWord(Handle:THandle):UInt64;
Description: Get the value of the specified property as a quadword
| Handle | The handle of the property to get the value of |
|---|---|
| Return | A quadword representation of the value or 0 if the property was not valid |
RTL Device tree functions
function SysDeviceTreeRead(const Path,Name:String; Buffer:Pointer; var Size:LongWord):LongWord;
Description: Implementation of DeviceTreeRead API
| Note | Not intended to be called directly by applications, use DeviceTreeRead instead. |
|---|
function SysDeviceTreeRead32(const Path,Name:String; var Value:LongWord):LongWord;
Description: Implementation of DeviceTreeRead32 API
| Note | Not intended to be called directly by applications, use DeviceTreeRead32 instead. |
|---|
function SysDeviceTreeRead64(const Path,Name:String; var Value:UInt64):LongWord;
Description: Implementation of DeviceTreeRead64 API
| Note | Not intended to be called directly by applications, use DeviceTreeRead64 instead. |
|---|
function SysDeviceTreeReadString(const Path,Name:String; var Value:String):LongWord;
Description: Implementation of DeviceTreeReadString API
| Note | Not intended to be called directly by applications, use DeviceTreeReadString instead. |
|---|
Device tree helper functions
function DeviceTreeGetBootArgs:PChar;
Description: Return a character pointer to the location of the command line in the device tree blob
| Note | Intended primarily for use by early boot stage processing which must limit the use of strings and other memory allocations
For normal use see DeviceTreeGetNode and DeviceTreeGetProperty |
|---|
function DeviceTreeGetRamdisk(var Address:PtrUInt; var Size:UInt64):Boolean;
Description: Return the address and size of the initial ram disk specified in the device tree blob
| Address | Used to return the address value |
|---|---|
| Size | Used to return the size value |
| Return | True if an initial ram disk was specified in the device tree, False if not. |
| Note | Intended primarily for use by early boot stage processing which must limit the use of strings and other memory allocations
For normal use see DeviceTreeGetNode and DeviceTreeGetProperty |
function DeviceTreeGetMemory(Index:LongWord; var Range:LongWord; var Address:PtrUInt; var Size:UInt64):Boolean;
Description: Return the address and size of a memory block specified in the device tree blob
| Index | The index of the memory block to return (The first block is 0) |
|---|---|
| Range | Used to return the page range value (If applicable) |
| Address | Used to return the address value |
| Size | Used to return the size value |
| Return | True if the memory block requested was found in the device tree, False if not. |
| Note | Intended primarily for use by early boot stage processing which must limit the use of strings and other memory allocations
For normal use see DeviceTreeGetNode and DeviceTreeGetProperty |
function DeviceTreeGetReservation(Index:LongWord; var Address:PtrUInt; var Size:UInt64):Boolean;
Description: Return the address and size of a memory reservation specified in the device tree blob
| Index | The index of the memory reservation to return (The first reservation is 0) |
|---|---|
| Address | Used to return the address value |
| Size | Used to return the size value |
| Return | True if the memory reservation requested was found in the device tree, False if not. |
function DeviceTreeLogTree:LongWord;
Description: Print information about all nodes and properties in the device tree
| Return | ERROR_SUCCESS if completed or another error code on failure |
|---|
function DeviceTreeLogTreeEx(Node:THandle; Output:TDTBLogOutput; Decode:TDTBDecodeValue; Data:Pointer):LongWord;
Description: Print information about one or all nodes and properties in the device tree with custom value decode callback
| Node | The node to print information about (INVALID_HANDLE_VALUE for all nodes) |
|---|---|
| Output | The log output callback to print information to (nil to use the default output) |
| Decode | The callback to decode a value into a string (nil to use the default decode) |
| Data | A pointer to call specific data which should be passed to the callbacks (Optional) |
| Return | ERROR_SUCCESS if completed or another error code on failure |
Return to Unit Reference
