Unit Keyboard
From Ultibo.org
Return to Unit Reference
Description
Ultibo Keyboard Interface unit
Keyboard Devices
This unit provides the Keyboard device interface and keyboard API to be used by both drivers and applications.
The API includes functions to create, register, locate, read, write, control and configure each connected keyboard device.
The API supports a global keyboard buffer so multiple devices can feed data into a common buffer as well as a buffer per device to allow each device to be used for a specific purpose. For example an application with two separate displays may choose to have a keyboard device to control each one individually.
Constants
Keyboard specific constants
KEYBOARD_NAME_* KEYBOARD_NAME_PREFIX = 'Keyboard';
|
Name prefix for Keyboard Devices |
Keyboard device type
KEYBOARD_TYPE_* KEYBOARD_TYPE_NONE = 0;
|
|
KEYBOARD_TYPE_USB = 1;
|
|
KEYBOARD_TYPE_PS2 = 2;
|
|
KEYBOARD_TYPE_SERIAL = 3;
|
|
KEYBOARD_TYPE_MAX = 3;
|
|
Keyboard device state
KEYBOARD_STATE_* KEYBOARD_STATE_DETACHED = 0;
|
|
KEYBOARD_STATE_DETACHING = 1;
|
|
KEYBOARD_STATE_ATTACHING = 2;
|
|
KEYBOARD_STATE_ATTACHED = 3;
|
|
KEYBOARD_STATE_MAX = 3;
|
|
Keyboard device flag
KEYBOARD_FLAG_* KEYBOARD_FLAG_NON_BLOCK = $00000001;
|
If set device reads are non blocking (Also supported in Flags parameter of KeyboardReadEx) |
KEYBOARD_FLAG_DIRECT_READ = $00000002;
|
If set device writes keyboard data to its local buffer which must be read using KeyboardDeviceRead |
KEYBOARD_FLAG_PEEK_BUFFER = $00000004;
|
Peek at the buffer to see if any data is available, don't remove it (Used only in Flags parameter of KeyboardReadEx) |
KEYBOARD_FLAG_PEEK_BUFFER = $00000004;
|
|
KEYBOARD_FLAG_MASK = KEYBOARD_FLAG_NON_BLOCK or KEYBOARD_FLAG_DIRECT_READ or KEYBOARD_FLAG_PEEK_BUFFER;
| |
Keyboard device control code
KEYBOARD_CONTROL_* KEYBOARD_CONTROL_GET_FLAG = 1;
|
Get Flag |
KEYBOARD_CONTROL_SET_FLAG = 2;
|
Set Flag |
KEYBOARD_CONTROL_CLEAR_FLAG = 3;
|
Clear Flag |
KEYBOARD_CONTROL_FLUSH_BUFFER = 4;
|
Flush Buffer |
KEYBOARD_CONTROL_GET_LED = 5;
|
Get LED |
KEYBOARD_CONTROL_SET_LED = 6;
|
Set LED |
KEYBOARD_CONTROL_CLEAR_LED = 7;
|
Clear LED |
KEYBOARD_CONTROL_GET_REPEAT_RATE = 8;
|
Get Repeat Rate |
KEYBOARD_CONTROL_SET_REPEAT_RATE = 9;
|
Set Repeat Rate |
KEYBOARD_CONTROL_GET_REPEAT_DELAY = 10;
|
Get Repeat Delay |
KEYBOARD_CONTROL_SET_REPEAT_DELAY = 11;
|
Set Repeat Delay |
Keyboard device LED
KEYBOARD_LED_* KEYBOARD_LED_NONE = $00000000;
|
|
KEYBOARD_LED_NUMLOCK = $00000001;
|
|
KEYBOARD_LED_CAPSLOCK = $00000002;
|
|
KEYBOARD_LED_SCROLLLOCK = $00000004;
|
|
KEYBOARD_LED_COMPOSE = $00000008;
|
|
KEYBOARD_LED_KANA = $00000010;
|
|
KEYBOARD_LED_MASK = KEYBOARD_LED_NUMLOCK or KEYBOARD_LED_CAPSLOCK or KEYBOARD_LED_SCROLLLOCK or KEYBOARD_LED_COMPOSE or KEYBOARD_LED_KANA;
| |
Keyboard buffer size
KEYBOARD_BUFFER_* KEYBOARD_BUFFER_SIZE = 512;
|
Keyboard sampling rate
KEYBOARD_REPEAT_* KEYBOARD_REPEAT_RATE = 40;
|
40msec -> 25cps |
KEYBOARD_REPEAT_DELAY = 10;
|
10 x KEYBOARD_REPEAT_RATE = 400msec initial delay before repeat |
Keyboard data definition
KEYBOARD_* | Values for TKeyboardData.Modifiers | |
KEYBOARD_LEFT_CTRL = $00000001;
|
The Left Control key is pressed |
KEYBOARD_LEFT_SHIFT = $00000002;
|
The Left Shift key is pressed |
KEYBOARD_LEFT_ALT = $00000004;
|
The Left Alt key is pressed |
KEYBOARD_LEFT_GUI = $00000008;
|
The Left GUI (or Windows) key is pressed |
KEYBOARD_RIGHT_CTRL = $00000010;
|
The Right Control key is pressed |
KEYBOARD_RIGHT_SHIFT = $00000020;
|
The Right Shift key is pressed |
KEYBOARD_RIGHT_ALT = $00000040;
|
The Right Alt key is pressed |
KEYBOARD_RIGHT_GUI = $00000080;
|
The Right GUI (or Windows) key is pressed |
KEYBOARD_NUM_LOCK = $00000100;
|
Num Lock is currently on |
KEYBOARD_CAPS_LOCK = $00000200;
|
Caps Lock is currently on |
KEYBOARD_SCROLL_LOCK = $00000400;
|
Scroll Lock is currently on |
KEYBOARD_COMPOSE = $00000800;
|
Compose is currently on |
KEYBOARD_KANA = $00001000;
|
Kana is currently on |
KEYBOARD_KEYUP = $00002000;
|
The key state changed to up |
KEYBOARD_KEYDOWN = $00004000;
|
The key state changed to down |
KEYBOARD_KEYREPEAT = $00008000;
|
The key is being repeated |
KEYBOARD_DEADKEY = $00010000;
|
The key is a being handled as a deadkey} |
KEYBOARD_ALTGR = $00020000;
|
The AltGr key is pressed (Normally also Right Alt but may be Ctrl-Alt) |
Keyboard logging
KEYBOARD_LOG_* KEYBOARD_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG;
|
Keyboard debugging messages |
KEYBOARD_LOG_LEVEL_INFO = LOG_LEVEL_INFO;
|
Keyboard informational messages, such as a device being attached or detached |
KEYBOARD_LOG_LEVEL_WARN = LOG_LEVEL_WARN;
|
Keyboard warning messages |
KEYBOARD_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR;
|
Keyboard error messages |
KEYBOARD_LOG_LEVEL_NONE = LOG_LEVEL_NONE;
|
No Keyboard messages |
USB keyboard specific constants
USBKEYBOARD_* | Note: The following constants are duplicated with the USBKeyboard unit for backwards compatibility |
USB HID interface subclass
USB_HID_SUBCLASS_* | See USB HID v1.11 specification | |
USB_HID_SUBCLASS_NONE = 0;
|
Section 4.2 |
USB_HID_SUBCLASS_BOOT = 1;
|
Section 4.2 |
USB HID interface protocol
USB_HID_BOOT_PROTOCOL_* | See USB HID v1.11 specification | |
USB_HID_BOOT_PROTOCOL_NONE = 0;
|
Section 4.3 |
USB_HID_BOOT_PROTOCOL_KEYBOARD = 1;
|
Section 4.3 |
USB_HID_BOOT_PROTOCOL_MOUSE = 2;
|
Section 4.3 |
USB HID class descriptor
USB_HID_DESCRIPTOR_* | See USB HID v1.11 specification | |
USB_HID_DESCRIPTOR_TYPE_HID = $21;
|
Section 7.1 |
USB_HID_DESCRIPTOR_TYPE_REPORT = $22;
|
Section 7.1 |
USB_HID_DESCRIPTOR_TYPE_PHYSICAL_DESCRIPTOR = $23;
|
Section 7.1 |
USB HID request
USB_HID_REQUEST_* | See USB HID v1.11 specification | |
USB_HID_REQUEST_GET_REPORT = $01;
|
Section 7.2 |
USB_HID_REQUEST_GET_IDLE = $02;
|
Section 7.2 |
USB_HID_REQUEST_GET_PROTOCOL = $03;
|
Section 7.2 |
USB_HID_REQUEST_SET_REPORT = $09;
|
Section 7.2 |
USB_HID_REQUEST_SET_IDLE = $0A;
|
Section 7.2 |
USB_HID_REQUEST_SET_PROTOCOL = $0B;
|
Section 7.2 |
USB HID protocol
USB_HID_PROTOCOL_* | See USB HID v1.11 specification | |
USB_HID_PROTOCOL_BOOT = 0;
|
Section 7.2.5 |
USB_HID_PROTOCOL_REPORT = 1;
|
Section 7.2.5 |
USB HID report
USB_HID_REPORT_* | See USB HID v1.11 specification | |
USB_HID_REPORT_INPUT = 1;
|
Section 7.2.1 |
USB_HID_REPORT_OUTPUT = 2;
|
Section 7.2.1 |
USB_HID_REPORT_FEATURE = 3;
|
Section 7.2.1 |
USB HID report Ids
USB_HID_REPORTID_* | See USB HID v1.11 specification | |
USB_HID_REPORTID_NONE = 0;
|
Section 7.2.1 |
USB HID boot protocol
USB_HID_BOOT_LEFT_*, USB_HID_BOOT_RIGHT_* USB_HID_BOOT_LEFT_CTRL = (1 shl 0);
|
|
USB_HID_BOOT_LEFT_SHIFT = (1 shl 1);
|
|
USB_HID_BOOT_LEFT_ALT = (1 shl 2);
|
|
USB_HID_BOOT_LEFT_GUI = (1 shl 3);
|
|
USB_HID_BOOT_RIGHT_CTRL = (1 shl 4);
|
|
USB_HID_BOOT_RIGHT_SHIFT = (1 shl 5);
|
|
USB_HID_BOOT_RIGHT_ALT = (1 shl 6);
|
|
USB_HID_BOOT_RIGHT_GUI = (1 shl 7);
|
USB HID boot protocol report data
USB_HID_BOOT_REPORT_* USB_HID_BOOT_REPORT_SIZE = 8;
|
Appendix B of HID Device Class Definition 1.11 |
USB HID boot protocol output
USB_HID_BOOT_*_LED USB_HID_BOOT_NUMLOCK_LED = (1 shl 0);
|
|
USB_HID_BOOT_CAPSLOCK_LED = (1 shl 1);
|
|
USB_HID_BOOT_SCROLLLOCK_LED = (1 shl 2);
|
|
USB_HID_BOOT_COMPOSE_LED = (1 shl 3);
|
|
USB_HID_BOOT_KANA_LED = (1 shl 4);
|
|
USB_HID_BOOT_LEDMASK = USB_HID_BOOT_NUMLOCK_LED or USB_HID_BOOT_CAPSLOCK_LED or USB_HID_BOOT_SCROLLLOCK_LED or USB_HID_BOOT_COMPOSE_LED or USB_HID_BOOT_KANA_LED;
|
|
USB HID boot protocol output data
USB_HID_BOOT_OUTPUT_* USB_HID_BOOT_OUTPUT_SIZE = 1;
|
Appendix B of HID Device Class Definition 1.11 |
USB_HID_BOOT_USAGE_NUMLOCK = SCAN_CODE_NUMLOCK;
|
83 |
USB_HID_BOOT_USAGE_CAPSLOCK = SCAN_CODE_CAPSLOCK;
|
57 |
USB_HID_BOOT_USAGE_SCROLLLOCK = SCAN_CODE_SCROLLLOCK;
|
71 |
Type definitions
Keyboard data
PKeyboardData = ^TKeyboardData;
TKeyboardData = record
Modifiers:LongWord;
|
Keyboard modifier flags for Shift, Alt, Control etc (eg KEYBOARD_LEFT_CTRL) |
ScanCode:Word;
|
Untranslated scan code value from keyboard (See SCAN_CODE_* constants) |
KeyCode:Word;
|
Translated key code value from keyboard (See KEY_CODE_* constants) |
CharCode:Char;
|
ANSI character representing the translated key code |
CharUnicode:WideChar;
|
Unicode character representing the translated key code |
Keyboard buffer
PKeyboardBuffer = ^TKeyboardBuffer;
TKeyboardBuffer = record
Wait:TSemaphoreHandle;
|
Data ready semaphore |
Start:LongWord;
|
Index of first buffer ready |
Count:LongWord;
|
Number of messages ready in buffer |
Buffer:array[0..(KEYBOARD_BUFFER_SIZE - 1)] of TKeyboardData;
|
Keyboard enumeration callback
TKeyboardEnumerate = function(Keyboard:PKeyboardDevice; Data:Pointer):LongWord;
|
Keyboard notification callback
TKeyboardNotification = function(Device:PDevice;Data:Pointer;Notification:LongWord):LongWord;
|
Keyboard device get
TKeyboardDeviceGet = function(Keyboard:PKeyboardDevice; var KeyCode:Word):LongWord;
|
Keyboard device read
TKeyboardDeviceRead = function(Keyboard:PKeyboardDevice; Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;
|
Keyboard device control
TKeyboardDeviceControl = function(Keyboard:PKeyboardDevice; Request:Integer; Argument1:PtrUInt; var Argument2:PtrUInt):LongWord;
|
Keyboard device
PKeyboardDevice = ^TKeyboardDevice;
TKeyboardDevice = record
| Device Properties | |
Device:TDevice;
|
The Device entry for this Keyboard |
| Keyboard Properties | |
KeyboardId:LongWord;
|
Unique Id of this Keyboard in the Keyboard table |
KeyboardState:LongWord;
|
Keyboard state (eg KEYBOARD_STATE_ATTACHED) |
KeyboardLEDs:LongWord;
|
Keyboard LEDs (eg KEYBOARD_LED_NUMLOCK) |
KeyboardRate:LongWord;
|
Keyboard repeat rate (Milliseconds) |
KeyboardDelay:LongWord;
|
Keyboard repeat delay (Number of KeyboardRate intervals before first repeat) |
DeviceGet:TKeyboardDeviceGet;
|
A Device specific DeviceGet method implementing a standard Keyboard device interface (Or nil if the default method is suitable) |
DeviceRead:TKeyboardDeviceRead;
|
A Device specific DeviceRead method implementing a standard Keyboard device interface (Or nil if the default method is suitable) |
DeviceControl:TKeyboardDeviceControl;
|
A Device specific DeviceControl method implementing a standard Keyboard device interface (Or nil if the default method is suitable) |
| Driver Properties | |
Lock:TMutexHandle;
|
Keyboard lock |
Code:Word;
|
Scan code of current deadkey (If Applicable) |
Index:Word;
|
Index state for current deadkey (If Applicable) |
Modifiers:LongWord;
|
Modifier state for current deadkey (If Applicable) |
Buffer:TKeyboardBuffer;
|
Keyboard input buffer |
| Statistics Properties | |
ReceiveCount:LongWord;
|
|
ReceiveErrors:LongWord;
|
|
BufferOverruns:LongWord;
|
|
| Internal Properties | |
Prev:PKeyboardDevice;
|
Previous entry in Keyboard table |
Next:PKeyboardDevice;
|
Next entry in Keyboard table |
USB HID descriptor
PUSBHIDDescriptor = ^TUSBHIDDescriptor;
TUSBHIDDescriptor = packed record
bLength:Byte;
|
|
bDescriptorType:Byte;
|
|
bcdHID:Word;
|
|
bCountryCode:Byte;
|
|
bNumDescriptors:Byte;
|
|
bHIDDescriptorType:Byte;
|
|
wHIDDescriptorLength:Word;
|
|
| Note: Up to two optional bHIDDescriptorType/wHIDDescriptorLength pairs after the Report descriptor details | |
USB keyboard report
PUSBKeyboardReport = ^TUSBKeyboardReport;
TUSBKeyboardReport = array[0..7] of Byte;
USB keyboard device
PUSBKeyboardDevice = ^TUSBKeyboardDevice;
TUSBKeyboardDevice = record
| Keyboard Properties | |
Keyboard:TKeyboardDevice;
|
|
| USB Properties | |
HIDInterface:PUSBInterface;
|
USB HID Keyboard Interface |
ReportRequest:PUSBRequest;
|
USB request for keyboard report data |
ReportEndpoint:PUSBEndpointDescriptor;
|
USB Keyboard Interrupt IN Endpoint |
HIDDescriptor:PUSBHIDDescriptor;
|
USB HID Descriptor for keyboard |
ReportDescriptor:Pointer;
|
USB HID Report Descriptor for keyboard |
LastCode:Word;
|
The scan code of the last key pressed |
LastCount:LongWord;
|
The repeat count of the last key pressed |
LastReport:TUSBKeyboardReport;
|
The last keyboard report received |
PendingCount:LongWord;
|
Number of USB requests pending for this keyboard |
WaiterThread:TThreadId;
|
Thread waiting for pending requests to complete (for keyboard detachment) |
Public variables
Keyboard logging
KEYBOARD_DEFAULT_LOG_LEVEL:LongWord = KEYBOARD_LOG_LEVEL_DEBUG;
|
Minimum level for Keyboard messages. Only messages with level greater than or equal to this will be printed. |
KEYBOARD_LOG_ENABLED:Boolean;
|
Function declarations
Initialization functions
procedure KeyboardInit;
Description: Initialize the keyboard unit and device table
| Note | Called only during system startup |
|---|
Keyboard functions
function KeyboardGet(var KeyCode:Word):LongWord;
Description: Get the first key code from the global keyboard buffer
| KeyCode | The returned key code read from the buffer (eg KEY_CODE_A) |
|---|---|
| Return | ERROR_SUCCESS if completed or another error code on failure |
| Note | Key code is the value translated from the scan code using the current keymap it may not be a character code and it may include non printable characters
To translate a key code to a character call KeymapGetCharCode() |
function KeyboardPeek:LongWord;
Description: Peek at the global keyboard buffer to see if any data packets are ready
| Return | ERROR_SUCCESS if packets are ready, ERROR_NO_MORE_ITEMS if not or another error code on failure. |
|---|
function KeyboardRead(Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord; inline;
Description: Read keyboard data packets from the global keyboard buffer
| Buffer | Pointer to a buffer to copy the keyboard data packets to |
|---|---|
| Size | The size of the buffer in bytes (Must be at least TKeyboardData or greater) |
| Count | The number of keyboard data packets copied to the buffer |
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardReadEx(Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: Read keyboard data packets from the global keyboard buffer
| Buffer | Pointer to a buffer to copy the keyboard data packets to |
|---|---|
| Size | TThe size of the buffer in bytes (Must be at least TKeyboardData or greater) |
| Flags | The flags to use for the read (eg KEYBOARD_FLAG_NON_BLOCK) |
| Count | The number of keyboard data packets copied to the buffer |
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardPut(ScanCode,KeyCode:Word; Modifiers:LongWord):LongWord;
Description: Put a scan code and key code in the global keyboard buffer
| ScanCode | The scan code to write to the buffer (eg SCAN_CODE_A) |
|---|---|
| KeyCode | The key code to write to the buffer (eg KEY_CODE_A) |
| Modifiers | The modifier keys to write to the buffer (eg KEYBOARD_LEFT_CTRL) |
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardWrite(Buffer:Pointer; Size,Count:LongWord):LongWord;
Description: Write keyboard data packets to the global keyboard buffer
| Buffer | Pointer to a buffer to copy the keyboard data packets from |
|---|---|
| Size | The size of the buffer in bytes (Must be at least TKeyboardData or greater) |
| Count | The number of keyboard data packets to copy from the buffer |
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardFlush:LongWord;
Description: Flush the contents of the global keyboard buffer
| Return | ERROR_SUCCESS if completed or another error code on failure |
|---|
function KeyboardDeviceGet(Keyboard:PKeyboardDevice; var KeyCode:Word):LongWord;
Description: Get the first key code from the buffer of the specified keyboard
| Keyboard | The keyboard device to get from |
|---|---|
| Keycode | The returned key code read from the buffer (eg KEY_CODE_A) |
| Return | ERROR_SUCCESS if completed or another error code on failure |
| Note | Key code is the value translated from the scan code using the current keymap it may not be a character code and it may include non printable characters
To translate a key code to a character call KeymapGetCharCode() |
function KeyboardDeviceRead(Keyboard:PKeyboardDevice; Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;
Description: Read keyboard data packets from the buffer of the specified keyboard
| Keyboard | The keyboard device to read from |
|---|---|
| Buffer | Pointer to a buffer to copy the keyboard data packets to |
| Size | The size of the buffer in bytes (Must be at least TKeyboardData or greater) |
| Count | The number of keyboard data packets copied to the buffer |
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardDeviceControl(Keyboard:PKeyboardDevice; Request:Integer; Argument1:PtrUInt; var Argument2:PtrUInt):LongWord;
Description: Perform a control request on the specified keyboard device
| Keyboard | The keyboard device to control |
|---|---|
| Request | The request code for the operation (eg KEYBOARD_CONTROL_GET_FLAG) |
| Argument1 | The first argument for the operation (Dependent on request code) |
| Argument2 | The second argument for the operation (Dependent on request code) |
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardDeviceSetState(Keyboard:PKeyboardDevice; State:LongWord):LongWord;
Description: Set the state of the specified keyboard and send a notification
| Keyboard | The keyboard to set the state for |
|---|---|
| State | The new state to set and notify |
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardDeviceCreate:PKeyboardDevice;
Description: Create a new Keyboard device entry
| Return | Pointer to new Keyboard device entry or nil if keyboard could not be created |
|---|
function KeyboardDeviceCreateEx(Size:LongWord):PKeyboardDevice;
Description: Create a new Keyboard device entry
| Size | Size in bytes to allocate for new keyboard (Including the keyboard device entry) |
|---|---|
| Return | Pointer to new Keyboard device entry or nil if keyboard could not be created |
function KeyboardDeviceDestroy(Keyboard:PKeyboardDevice):LongWord;
Description: Destroy an existing Keyboard device entry
| Keyboard | The keyboard device to destroy |
|---|---|
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardDeviceRegister(Keyboard:PKeyboardDevice):LongWord;
Description: Register a new Keyboard device in the Keyboard table
| Keyboard | The keyboard device to register |
|---|---|
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardDeviceDeregister(Keyboard:PKeyboardDevice):LongWord;
Description: Deregister a Keyboard device from the Keyboard table
| Keyboard | The keyboard device to deregister |
|---|---|
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardDeviceFind(KeyboardId:LongWord):PKeyboardDevice;
Description: Find a keyboard device by ID in the keyboard table
| KeyboardId | The ID number of the keyboard to find |
|---|---|
| Return | Pointer to keyboard device entry or nil if not found |
function KeyboardDeviceFindByName(const Name:String):PKeyboardDevice; inline;
Description: Find a keyboard device by name in the keyboard table
| Name | The name of the keyboard to find (eg Keyboard0) |
|---|---|
| Return | Pointer to keyboard device entry or nil if not found |
function KeyboardDeviceFindByDescription(const Description:String):PKeyboardDevice; inline;
Description: Find a keyboard device by description in the keyboard table
| Description | The description of the keyboard to find (eg USB HID Keyboard) |
|---|---|
| Return | Pointer to keyboard device entry or nil if not found |
function KeyboardDeviceEnumerate(Callback:TKeyboardEnumerate; Data:Pointer):LongWord;
Description: Enumerate all keyboard devices in the keyboard table
| Callback | The callback function to call for each keyboard in the table |
|---|---|
| Data | A private data pointer to pass to callback for each keyboard in the table |
| Return | ERROR_SUCCESS if completed or another error code on failure |
function KeyboardDeviceNotification(Keyboard:PKeyboardDevice; Callback:TKeyboardNotification; Data:Pointer; Notification,Flags:LongWord):LongWord;
Description: Register a notification for keyboard device changes
| Keyboard | The keyboard device to notify changes for (Optional, pass nil for all keyboards) |
|---|---|
| Callback | The function to call when a notification event occurs |
| Data | A private data pointer to pass to callback when a notification event occurs |
| Notification | The events to register for notification of (eg DEVICE_NOTIFICATION_REGISTER) |
| Flags | The flags to control the notification (eg NOTIFIER_FLAG_WORKER) |
RTL console functions
function SysConsoleGetKey(var ACh:Char; AUserData:Pointer):Boolean;
Description: Handler for Platform ConsoleGetKey function
| Note | None documented |
|---|
function SysConsolePeekKey(var ACh:Char; AUserData:Pointer):Boolean;
Description: Handler for Platform ConsolePeekKey function
| Note | None documented |
|---|
function SysConsoleReadChar(var ACh:Char; AUserData:Pointer):Boolean;
Description: Handler for Platform ConsoleReadChar function
| Note | None documented |
|---|
function SysConsoleReadWideChar(var ACh:WideChar; AUserData:Pointer):Boolean;
Description: Handler for Platform ConsoleReadWideChar function
| Note | None documented |
|---|
Keyboard helper functions
function KeyboardGetCount:LongWord;
Description: Get the current keyboard count
| Note | None documented |
|---|
function KeyboardDeviceCheck(Keyboard:PKeyboardDevice):PKeyboardDevice;
Description: Check if the supplied Keyboard is in the keyboard table
| Note | None documented |
|---|
function KeyboardDeviceTypeToString(KeyboardType:LongWord):String;
Description: To be documented
| Note | None documented |
|---|
function KeyboardDeviceStateToString(KeyboardState:LongWord):String;
Description: To be documented
| Note | None documented |
|---|
function KeyboardDeviceStateToNotification(State:LongWord):LongWord;
Description: Convert a Keyboard state value into the notification code for device notifications
| Note | None documented |
|---|
function KeyboardRemapCtrlCode(KeyCode,CharCode:Word):Word;
Description: Remap Ctrl-<Key> combinations to ASCII control codes
| Note | Caller must check for Left-Ctrl or Right-Ctrl modifiers |
|---|
function KeyboardRemapKeyCode(ScanCode,KeyCode:Word; var CharCode:Byte; Modifiers:LongWord):Boolean;
Description: Remap the SCAN_CODE_* and KEY_CODE_* values to DOS compatible scan codes
| Return | Returns True if the key was remapped, False if it was not. |
|---|---|
| See | http://www.freepascal.org/docs-html/rtl/keyboard/kbdscancode.html
See also: \source\packages\rtl-console\src\inc\keyscan.inc |
| Note | See below for a version that uses SCAN_CODE_* values instead of translated KEY_CODE_* values |
function KeyboardRemapScanCode(ScanCode,KeyCode:Word; var CharCode:Byte; Modifiers:LongWord):Boolean;
Description: Remap the SCAN_CODE_* and KEY_CODE_* values to DOS compatible scan codes
| Return | Returns True if the key was remapped, False if it was not |
|---|---|
| See | http://www.freepascal.org/docs-html/rtl/keyboard/kbdscancode.html
See also: \source\packages\rtl-console\src\inc\keyscan.inc |
| Note | Same as above except using SCAN_CODE_* values instead of translated KEY_CODE_* values |
function KeyboardInsertData(Keyboard:PKeyboardDevice; Data:PKeyboardData; Signal:Boolean):LongWord;
Description: Insert a TKeyboardData entry into the keyboard buffer (Direct or Global)
| Keyboard | The keyboard device to insert data for |
|---|---|
| Data | The TKeyboardData entry to insert |
| Signal | If True then signal that new data is availale in the buffer |
| Return | ERROR_SUCCESS if completed or another error code on failure |
| Note | Caller must hold the keyboard lock |
procedure KeyboardLog(Level:LongWord; Keyboard:PKeyboardDevice; const AText:String);
Description: To be documented
| Note | None documented |
|---|
procedure KeyboardLogInfo(Keyboard:PKeyboardDevice; const AText:String); inline;
Description: To be documented
| Note | None documented |
|---|
procedure KeyboardLogWarn(Keyboard:PKeyboardDevice; const AText:String); inline;
Description: To be documented
| Note | None documented |
|---|
procedure KeyboardLogError(Keyboard:PKeyboardDevice; const AText:String); inline;
Description: To be documented
| Note | None documented |
|---|
procedure KeyboardLogDebug(Keyboard:PKeyboardDevice; const AText:String); inline;
Description: To be documented
| Note | None documented |
|---|
Return to Unit Reference
