Unit Touch

From Ultibo.org
Revision as of 06:14, 16 November 2022 by Ultibo (Talk | contribs)

Jump to: navigation, search

Return to Unit Reference


Description


Ultibo Touch Interface unit

Constants



Touch specific constants TOUCH_*
TOUCH_NAME_PREFIX = 'Touch'; Name prefix for Touch Devices


Touch device type TOUCH_TYPE_*
TOUCH_TYPE_NONE = 0;  
TOUCH_TYPE_RESISTIVE = 1;  
TOUCH_TYPE_CAPACITIVE = 2;  
 
TOUCH_TYPE_MAX = 2;  


Touch device state TOUCH_STATE_*
TOUCH_STATE_DISABLED = 0;  
TOUCH_STATE_ENABLED = 1;  
 
TOUCH_STATE_MAX = 1;  


Touch device flag TOUCH_FLAG_*
TOUCH_FLAG_NONE = $00000000;  
TOUCH_FLAG_NON_BLOCK = $00000001; If set device reads are non blocking (Also supported in Flags parameter of TouchDeviceRead)
TOUCH_FLAG_PEEK_BUFFER = $00000002; Peek at the buffer to see if any data is available, don't remove it (Used only in Flags parameter of TouchDeviceRead)
TOUCH_FLAG_MOUSE_DATA = $00000004; If set the device will write a mouse data event for each touch event
TOUCH_FLAG_MULTI_POINT = $00000008; If set the device supports multi point touch
TOUCH_FLAG_PRESSURE = $00000010; If set the device supports pressure value on touch points
TOUCH_FLAG_SWAP_XY = $00000020; If set swap the X and Y coordinates
TOUCH_FLAG_INVERT_X = $00000040; If set invert the X coordinate
TOUCH_FLAG_INVERT_Y = $00000080; If set invert the Y coordinate
TOUCH_FLAG_SWAP_MAX_XY = $00000100; If set swap the maximum X and Y values
 
Flags supported by TOUCH_CONTROL_GET/SET/CLEAR_FLAG
TOUCH_FLAG_MASK = TOUCH_FLAG_NON_BLOCK or TOUCH_FLAG_MOUSE_DATA or TOUCH_FLAG_MULTI_POINT or TOUCH_FLAG_PRESSURE or TOUCH_FLAG_SWAP_XY or TOUCH_FLAG_INVERT_X or TOUCH_FLAG_INVERT_Y or TOUCH_FLAG_SWAP_MAX_XY;


Touch device control code TOUCH_CONTROL_*
TOUCH_CONTROL_GET_FLAG = 1; Get Flag
TOUCH_CONTROL_SET_FLAG = 2; Set Flag
TOUCH_CONTROL_CLEAR_FLAG = 3; Clear Flag
TOUCH_CONTROL_FLUSH_BUFFER = 4; Flush Buffer
TOUCH_CONTROL_GET_WIDTH = 5; Get Screen Width
TOUCH_CONTROL_GET_HEIGHT = 6; Get Screen Height
TOUCH_CONTROL_GET_MAX_X = 7; Get Maximum X value (Only applies to Absolute X values)
TOUCH_CONTROL_GET_MAX_Y = 8; Get Maximum Y value (Only applies to Absolute Y values)
TOUCH_CONTROL_GET_MAX_Z = 9; Get Maximum Z value (Only applies to Absolute Z values)
TOUCH_CONTROL_GET_MAX_POINTS = 10; Get Maximum number of Touch Points
TOUCH_CONTROL_GET_ROTATION = 11; Get Rotation value (0, 90, 180, 270)(Only where supported by the driver)
TOUCH_CONTROL_SET_ROTATION = 12; Set Rotation value (0, 90, 180, 270)(Only where supported by the driver)
TOUCH_CONTROL_GET_CALLBACK = 13; Get the registered callback function for touch events
TOUCH_CONTROL_SET_CALLBACK = 14; Set the registered callback function for touch events


Touch buffer size TOUCH_BUFFER_*
TOUCH_BUFFER_SIZE = 1024;  


Touch data definitions TOUCH_FINGER*, TOUCH_ID_*
Values for TTouchData.Info
TOUCH_FINGER = $00000001; A finger is pressed at this touch point
Values for TTouchData.PointID
TOUCH_ID_UNKNOWN = Word(-1);  
Values for TTouchData.PositionX
TOUCH_X_UNKNOWN = -1;  
Values for TTouchData.PositionY
TOUCH_Y_UNKNOWN = -1;  
Values for TTouchData.PositionZ
TOUCH_Z_UNKNOWN = -1;  


Touch rotation TOUCH_ROTATION_*
TOUCH_ROTATION_0 = FRAMEBUFFER_ROTATION_0; No rotation
TOUCH_ROTATION_90 = FRAMEBUFFER_ROTATION_90; 90 degree rotation
TOUCH_ROTATION_180 = FRAMEBUFFER_ROTATION_180; 180 degree rotation
TOUCH_ROTATION_270 = FRAMEBUFFER_ROTATION_270; 270 degree rotation


Touch logging TOUCH_LOG_*
TOUCH_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG; Touch debugging messages
TOUCH_LOG_LEVEL_INFO = LOG_LEVEL_INFO; Touch informational messages, such as a device being attached or detached
TOUCH_LOG_LEVEL_WARN = LOG_LEVEL_WARN; Touch warning messages
TOUCH_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR; Touch error messages
TOUCH_LOG_LEVEL_NONE = LOG_LEVEL_NONE; No Touch messages


Type definitions



Touch data

PTouchData = ^TTouchData;

TTouchData = record

Info:LongWord; Bitmap of touch info values (eg TOUCH_FINGER)
PointID:Word; The touch point ID value for this touch (First ID is 1)
PositionX:SmallInt; The X position of this touch point
PositionY:SmallInt; The Y position of this touch point
The Z position of this touch point (If applicable)  
TouchWidth:Word; The Width of this touch point (If applicable)
TouchHeight:Word; The Height of this touch point (If applicable)
Parameter:Pointer; The parameter for the event callback (If applicable)

Touch buffer

PTouchBuffer = ^TTouchBuffer;

TTouchBuffer = record

Wait:TSemaphoreHandle; Buffer ready semaphore
Start:LongWord; Index of first buffer ready
Count:LongWord; Number of entries ready in buffer
Buffer:array[0..(TOUCH_BUFFER_SIZE - 1)] of TTouchData;  

Touch properties

PTouchProperties = ^TTouchProperties;

TTouchProperties = record

Flags:LongWord; Device flags (eg TOUCH_FLAG_MULTI_POINT)
Width:LongWord; Screen Width
Height:LongWord; Screen Height
Rotation:LongWord; Screen Rotation (eg TOUCH_ROTATION_180)
MaxX:LongWord; Maximum (absolute) X position for the touch device
MaxY:LongWord; Maximum (absolute) Y position for the touch device
MaxZ:LongWord; Maximum (absolute) Z position for the touch device (If applicable)
MaxWidth:LongWord; Maximum touch width value for the touch device (If applicable)
MaxHeight:LongWord; Maximum touch height value for the touch device (If applicable)
MaxPoints:LongWord; Maximum number of touch points

Touch event callback

TTouchEvent = function(Touch:PTouchDevice; Data:PTouchData):LongWord;

Touch enumeration callback

TTouchEnumerate = function(Touch:PTouchDevice; Data:Pointer):LongWord;

Touch notification callback

TTouchNotification = function(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;

Touch device start

TTouchDeviceStart = function(Touch:PTouchDevice):LongWord;

Touch device stop

TTouchDeviceStop = function(Touch:PTouchDevice):LongWord;

Touch device peek

TTouchDevicePeek = function(Touch:PTouchDevice):LongWord;

Touch device read

TTouchDeviceRead = function(Touch:PTouchDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;

Touch device write

TTouchDeviceWrite = function(Touch:PTouchDevice; Buffer:Pointer; Size,Count:LongWord):LongWord;

Touch device flush

TTouchDeviceFlush = function(Touch:PTouchDevice):LongWord;

Touch device update

TTouchDeviceUpdate = function(Touch:PTouchDevice):LongWord;

Touch device control

TTouchDeviceControl = function(Touch:PTouchDevice; Request:Integer; Argument1:PtrUInt; var Argument2:PtrUInt):LongWord;

Touch device get properties

TTouchDeviceGetProperties = function(Touch:PTouchDevice; Properties:PTouchProperties):LongWord;

Touch device

PTouchDevice = ^TTouchDevice;

TTouchDevice = record

Device Properties
Device:TDevice; The Device entry for this Touch device
Touch Properties
TouchId:LongWord; Unique Id of this Touch device in the Touch device table
TouchState:LongWord; Touch device state (eg TOUCH_STATE_ENABLED)
DeviceStart:TTouchDeviceStart; A Device specific DeviceStart method implementing the standard Touch device interface (Mandatory)
DeviceStop:TTouchDeviceStop; A Device specific DeviceStop method implementing the standard Touch device interface (Mandatory)
DevicePeek:TTouchDevicePeek; A Device specific DevicePeek method implementing a standard Touch device interface (Or nil if the default method is suitable)
DeviceRead:TTouchDeviceRead; A Device specific DeviceRead method implementing a standard Touch device interface (Or nil if the default method is suitable)
DeviceWrite:TTouchDeviceWrite; A Device specific DeviceWrite method implementing a standard Touch device interface (Or nil if the default method is suitable)
DeviceFlush:TTouchDeviceFlush; A Device specific DeviceFlush method implementing a standard Touch device interface (Or nil if the default method is suitable)
DeviceUpdate:TTouchDeviceUpdate; A Device specific DeviceUpdate method implementing a standard Touch device interface (Or nil if the default method is suitable)
DeviceControl:TTouchDeviceControl; A Device specific DeviceControl method implementing a standard Touch device interface (Or nil if the default method is suitable)
DeviceGetProperties:TTouchDeviceGetProperties; A Device specific DeviceGetProperties method implementing a standard Touch device interface (Or nil if the default method is suitable)
Driver Properties
Lock:TMutexHandle; Device lock
Event:TTouchEvent; Event callback function (If assigned)
Parameter:Pointer; Parameter for the event callback (or nil)
Buffer:TTouchBuffer; Touch input buffer
Properties:TTouchProperties; Device properties
Statistics Properties
ReceiveCount:LongWord;  
ReceiveErrors:LongWord;  
BufferOverruns:LongWord;  
Internal Properties
Prev:PTouchDevice; Previous entry in Touch device table
Next:PTouchDevice; Next entry in Touch device table


Public variables



Touch logging

TOUCH_DEFAULT_LOG_LEVEL:LongWord = TOUCH_LOG_LEVEL_DEBUG; Minimum level for Touch messages. Only messages with level greater than or equal to this will be printed.
TOUCH_LOG_ENABLED:Boolean;


Function declarations



Initialization functions

procedure TouchInit;
Description: Initialize the Touch unit and Touch device table
Note Called only during system startup


Touch functions

function TouchDeviceStart(Touch:PTouchDevice):LongWord;
Description: Start the specified Touch device ready for receiving events
Touch The Touch device to start
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceStop(Touch:PTouchDevice):LongWord;
Description: Stop the specified Touch device and terminate receiving events
Touch The Touch device to stop
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDevicePeek(Touch:PTouchDevice):LongWord;
Description: Peek at the buffer of the specified touch device to see if any data packets are ready
Touch The Touch device to peek at
Return ERROR_SUCCESS if packets are ready, ERROR_NO_MORE_ITEMS if not or another error code on failure.


function TouchDeviceRead(Touch:PTouchDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: Read touch data packets from the buffer of the specified touch device
Touch The Touch device to read from
Buffer Pointer to a buffer to copy the touch data packets to
Size The size of the buffer in bytes (Must be at least TTouchData or greater)
Flags The flags for the behaviour of the read (eg TOUCH_FLAG_NON_BLOCK)
Count The number of touch data packets copied to the buffer
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceWrite(Touch:PTouchDevice; Buffer:Pointer; Size,Count:LongWord):LongWord;
Description: Write touch data packets to the buffer of the specified touch device
Touch The Touch device to write to
Buffer Pointer to a buffer to copy the touch data packets from
Size The size of the buffer in bytes (Must be at least TTouchData or greater)
Count The number of touch data packets to copy from the buffer
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceFlush(Touch:PTouchDevice):LongWord;
Description: Flush the contents of the buffer of the specified touch device
Touch The Touch device to flush
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceUpdate(Touch:PTouchDevice):LongWord;
Description: Request the specified touch device to update the current configuration
Touch The Touch device to update
Return ERROR_SUCCESS if completed or another error code on failure
Note Items updated can include rotation, maximum X and Y and flags (If supported)


function TouchDeviceControl(Touch:PTouchDevice; Request:Integer; Argument1:PtrUInt; var Argument2:PtrUInt):LongWord;
Description: Perform a control request on the specified touch device
Touch The Touch device to control
Request The request code for the operation (eg TOUCH_CONTROL_GET_FLAG)
Argument1 The first argument for the operation (Dependent on request code)
Argument2 The second argument for the operation (Dependent on request code)
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceProperties(Touch:PTouchDevice; Properties:PTouchProperties):LongWord; inline;
Description: Get the properties for the specified Touch device
Touch The Touch device to get properties from
Properties Pointer to a TTouchProperties structure to fill in
Return ERROR_SUCCESS if completed or another error code on failure
Note Replaced by TouchDeviceGetProperties for consistency


function TouchDeviceGetProperties(Touch:PTouchDevice;Properties:PTouchProperties):LongWord;
Description: Get the properties for the specified Touch device
Touch The Touch device to get properties from
Properties Pointer to a TTouchProperties structure to fill in
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceCreate:PTouchDevice;
Description: Create a new Touch device entry
Return Pointer to new Touch device entry or nil if Touch device could not be created


function TouchDeviceCreateEx(Size:LongWord):PTouchDevice;
Description: Create a new Touch device entry
Size Size in bytes to allocate for new Touch device (Including the Touch device entry)
Return Pointer to new Touch device entry or nil if Touch device could not be created


function TouchDeviceDestroy(Touch:PTouchDevice):LongWord;
Description: Destroy an existing Touch device entry
Touch The Touch device to destroy
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceRegister(Touch:PTouchDevice):LongWord;
Description: Register a new Touch device in the Touch device table
Touch The Touch device to register
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceDeregister(Touch:PTouchDevice):LongWord;
Description: Deregister an Touch device from the Touch device table
Touch The Touch device to dregister
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceFind(TouchId:LongWord):PTouchDevice;
Description: Find a Touch device by ID in the Touch device table
TouchId The ID number of the Touch device to find
Return Pointer to Touch device entry or nil if not found


function TouchDeviceFindByName(const Name:String):PTouchDevice; inline;
Description: Find a Touch device by name in the device table
Name The name of the Touch device to find (eg Touch0)
Return Pointer to Touch device entry or nil if not found


function TouchDeviceFindByDescription(const Description:String):PTouchDevice; inline;
Description: Find a Touch device by description in the device table
Description The description of the Touch to find (eg USB Touchscreen)
Return Pointer to Touch device entry or nil if not found


function TouchDeviceEnumerate(Callback:TTouchEnumerate; Data:Pointer):LongWord;
Description: Enumerate all Touch devices in the Touch device table
Callback The callback function to call for each Touch device in the table
Data A private data pointer to pass to callback for each Touch device in the table
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceNotification(Touch:PTouchDevice; Callback:TTouchNotification; Data:Pointer; Notification,Flags:LongWord):LongWord;
Description: Register a notification for Touch device changes
Touch The Touch device to notify changes for (Optional, pass nil for all Touch devices)
Callback The function to call when a notification event occurs
Data A private data pointer to pass to callback when a notification event occurs
Notification The events to register for notification of (eg DEVICE_NOTIFICATION_REGISTER)
Flags The flags to control the notification (eg NOTIFIER_FLAG_WORKER)
Return ERROR_SUCCESS if completed or another error code on failure


Touch helper functions

function TouchGetCount:LongWord; inline;
Description: Get the current Touch device count
Return The number of Touch devices


function TouchDeviceGetDefault:PTouchDevice; inline;
Description: Get the current default Touch device
Return Pointer to default Touch device entry


function TouchDeviceSetDefault(Touch:PTouchDevice):LongWord;
Description: Set the current default Touch device
Touch The Touch device to set as default
Return ERROR_SUCCESS if completed or another error code on failure


function TouchDeviceCheck(Touch:PTouchDevice):PTouchDevice;
Description: Check if the supplied Touch device is in the Touch device table
Touch The Touch device to check
Return Pointer to Touch device entry or nil if not found


function TouchDeviceTypeToString(TouchType:LongWord):String;
Description: Return a string describing the Touch device type (eg TOUCH_TYPE_CAPACITIVE)
Note None documented


function TouchDeviceStateToString(TouchState:LongWord):String;
Description: Return a string describing the Touch device state (eg TOUCH_STATE_ENABLED)
Note None documented


function TouchDeviceRotationToString(Rotation:LongWord):String;
Description: Return a string describing the supplied touch rotation value
Note None documented


function TouchDeviceResolveRotation(ARotation:LongWord):LongWord;
Description: Resolve a value of 0, 90, 180 or 270 to a touch rotation constant (eg TOUCH_ROTATION_180)
Note Also accepts passing the touch rotation constant values directly


function TouchDeviceSetCallback(Touch:PTouchDevice; Event:TTouchEvent; Parameter:Pointer):LongWord;
Description: Set the event callback function for the specified touch device
Touch The touch device to set the event callback for
Event The event callback function to be called when touch data is received
Parameter A pointer to private data to be passed to the callback with each event
Return ERROR_SUCCESS if completed or another error code on failure
Note This function also clears the TOUCH_FLAG_MOUSE_DATA flag because the event callback is not compatible with receiving touch events as mouse data


function TouchInsertData(Touch:PTouchDevice; Data:PTouchData; Signal:Boolean):LongWord;
Description: Insert a TTouchData entry into the touch device buffer
Touch The touch device to insert data for
Data The TTouchData entry to insert
Signal If True then signal that new data is available in the buffer
Return ERROR_SUCCESS if completed or another error code on failure
Note Caller must hold the touch device lock


procedure TouchLog(Level:LongWord; Touch:PTouchDevice; const AText:String);
Description: To be documented
Note None documented


procedure TouchLogInfo(Touch:PTouchDevice; const AText:String); inline;
Description: To be documented
Note None documented


procedure TouchLogWarn(Touch:PTouchDevice; const AText:String); inline;
Description: To be documented
Note None documented


procedure TouchLogError(Touch:PTouchDevice; const AText:String); inline;
Description: To be documented
Note None documented


procedure TouchLogDebug(Touch:PTouchDevice; const AText:String); inline;
Description: To be documented
Note None documented


Return to Unit Reference