Unit BootQEMUVPB
Return to Unit Reference
Description
QEMU VersatilePB
SoC: ARM926EJ-S (Emulated)
CPU: Cortex A8 (ARMv7) (1 @ ???MHz)
or Cortex A53 (ARMv8) (1 @ ???MHz)
Cache: L1 16KB / L2 0KB
or L1 ??KB / L2 ??KB
FPU: VFPV3
or VFP
GPU: (None)
RAM: 256MB
USB: PCI OHCI USB controller
LAN: SMC 91c111 Ethernet adapter
SD/MMC: PL181 MultiMedia Card Interface with SD card
WiFi: (None)
Bluetooth: (None)
Other:
PL190 Vectored Interrupt Controller
Four PL011 UARTs
PL110 LCD controller
PL050 KMI with PS/2 keyboard and mouse
PCI host bridge
PCI OHCI USB controller
LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM devices
GPIO / I2C / Watchdog / SP804 Timer
Boot QEMUVPB
The QMEU system emulator (qemu-system-arm) will load this code at address 0x00010000 onwards and set the following registers before jumping to this code.
R0 - Zero
R1 - Machine Type (Versatile_PB = 0x0183)
R2 - Address of the ARM Tags structure (Normally 0x0100)
On entry to this code the processor will be in the following state:
World - Secure
Mode - Supervisor (ARM_MODE_SVC)
MMU - Disabled
FPU - Disabled
L1 Data Cache - Disabled
L1 Instruction Cache - Disabled
Branch Predication - Disabled
Unaligned Data Access - Disabled
Ultibo switches the processor to System mode for all operations and remains in the Secure world.
The initialization process enables the MMU, FPU, L1 Cache and other performance optimizations.
Constants
To be documented
Type definitions
To be documented
Public variables
To be documented
Function declarations
To be documented
Return to Unit Reference
