Difference between revisions of "Unit USBSTORAGE"

From Ultibo.org
Jump to: navigation, search
(Created page with "Return to Unit Reference === Description === ---- '''Ultibo USB Mass Storage Driver unit''' '''USB Mass Storage Devices''' The USB Mass Storage Class C...")
 
(No difference)

Latest revision as of 03:33, 29 March 2024

Return to Unit Reference


Description

Ultibo USB Mass Storage Driver unit

USB Mass Storage Devices

The USB Mass Storage Class Control/Bulk/Interrupt (CBI) Transport specification is approved for use only with full-speed floppy disk drives. CBI shall not be used in high-speed capable devices, or in devices other than floppy disk drives. CBI shall not be used in devices that implement LSDFS. Usage of CBI for any new design is discouraged.

Therefore the majority of USB Mass Storage devices use the Bulk only interface.

USB mass storage class devices normally use the SCSI command set and therefore the USB storage driver consumes the SCSI unit for the protocol and command definitions. USB mass storage devices are registered directly as Storage devices not as SCSI devices.

Constants


USB storage USB_STORAGE_*
USBSTORAGE_STORAGE_DESCRIPTION = 'USB Storage Device';  
 
USBSTORAGE_DRIVER_NAME = 'USB Mass Storage Driver'; Name of USB storage driver
 
CB/CBI (Control/Bulk/Interrupt) Requests
USB_STORAGE_REQUEST_CBI_ADSC = 0;  
 
BBB (Bulk Only) Requests
USB_STORAGE_REQUEST_BBB_RESET = $FF;  
USB_STORAGE_REQUEST_BBB_GET_MAX_LUN = $FE;  
 
Command Block Wrapper
USB_STORAGE_CBW_SIGNATUR = $43425355;  
 
USB_STORAGE_CBW_FLAGS_OUT = $00;  
USB_STORAGE_CBW_FLAGS_IN = $80;  
 
USB_STORAGE_CBW_CB_LENGTH = 16;  
 
USB_STORAGE_CBW_SIZE = 31;  
 
Command Status Wrapper
USB_STORAGE_CSW_SIGNATURE = $53425355;  
 
USB_STORAGE_CSW_STATUS_GOOD = $00;  
USB_STORAGE_CSW_STATUS_FAILED = $01;  
USB_STORAGE_CSW_STATUS_PHASE = $02;  
 
USB_STORAGE_CSW_SIZE = 13;  
 
Command Data
USB_STORAGE_COMMAND_MAX_SIZE = 16;  
 
Command Retry Counts
USB_STORAGE_READ_RETRIES = 2;  
USB_STORAGE_WRITE_RETRIES = 2;  
USB_STORAGE_STATUS_RETRIES = 2;  
USB_STORAGE_INQUIRY_RETRIES = 5;  
USB_STORAGE_READ_CAPACITY_RETRIES = 3;  
USB_STORAGE_TEST_UNIT_READY_RETRIES = 5; 10; TestingRPi
 
Peripheral Device Types
These are a subset of the SCSI Peripheral Device Types
USB_STORAGE_DEVICE_TYPE_DISK = $00; SBC Direct-access device (e.g., UHD Floppy disk)
USB_STORAGE_DEVICE_TYPE_CDROM = $05; MMC-5 CD-ROM device
USB_STORAGE_DEVICE_TYPE_OPTICAL = $07; Optical memory device (e.g., Non-CD optical disks)
USB_STORAGE_DEVICE_TYPE_RBC = $0E; RBC Direct-access device (e.g., UHD Floppy disk)
USB_STORAGE_DEVICE_TYPE_UNKNOWN = $1F; Unknown or no device type


Type definitions


USB command block

PUSBCommandBlock = ^TUSBCommandBlock;

TUSBCommandBlock = record

Note: SBC Command Block (Derived from TSCSICommandBlock)
SCSI Properties
Command:array[0..USB_STORAGE_COMMAND_MAX_SIZE - 1] of Byte; Command
SenseData:array[0..63] of Byte; Request Sense
Status:Byte; SCSI Status
TargetID:Byte; Target Id
TargetLUN:Byte; Target LUN
CommandLength:Byte; Command Length
DataLength:LongWord; Data Length
Data:Pointer; Pointer to Data
MessageOut:array[0..11] of Byte; Message out buffer
MessageIn:array[0..11] of Byte; Message in buffer
SenseCommandLength:Byte; Sense Command Length
SenseDataLength:LongWord; Sense Data Length
SenseCommand:array[0..5] of Byte; Sense Command
ControllerStatus:LongWord; Controller Status
TransferredBytes:LongWord; Transferred Bytes
USB Properties
Direction:Byte; USB Direction (eg USB_DIRECTION_OUT or USB_DIRECTION_IN)

USB storage device

PUSBStorageDevice = ^TUSBStorageDevice;

TUSBStorageDevice = record

Storage Properties
Storage:TStorageDevice;  
USB Properties
Subclass:Byte;  
Protocol:Byte;  
MaxLUN:Byte;  
Sequence:LongWord; For dCBWTag property
Primary:PUSBStorageDevice; Primary storage device (for multi LUN devices)
StorageInterface:PUSBInterface; USB Mass Storage device Interface
ReadWait:TSemaphoreHandle; Read completed semaphore
WriteWait:TSemaphoreHandle; Write completed semaphore
InterruptWait:TSemaphoreHandle; Interrupt completed semaphore
ReadRequest:PUSBRequest; Bulk IN Request
WriteRequest:PUSBRequest; Bulk OUT Request
InterruptRequest:PUSBRequest; Interrupt IN Request
ReadEndpoint:PUSBEndpointDescriptor; Bulk IN Endpoint
WriteEndpoint:PUSBEndpointDescriptor; Bulk OUT Endpoint
InterruptEndpoint:PUSBEndpointDescriptor; Interrupt IN Endpoint
PendingCount:LongWord; Number of USB requests pending for this storage
WaiterThread:TThreadId; Thread waiting for pending requests to complete (for storage eject)
SCSI Properties
CommandBlock:TUSBCommandBlock;  
ATAPI Properties
   
RBC Properties
   

USB command block wrapper

PUSBCommandBlockWrapper = ^TUSBCommandBlockWrapper;

TUSBCommandBlockWrapper = record

dCBWSignature:LongWord;  
dCBWTag:LongWord;  
dCBWDataTransferLength:LongWord;  
bCBWFlags:Byte;  
bCBWLUN:Byte;  
bCBWCBLength:Byte;  
CBWCB:array[0..USB_STORAGE_CBW_CB_LENGTH - 1] of Byte;  

USB command status wrapper

PUSBCommandStatusWrapper = ^TUSBCommandStatusWrapper;

TUSBCommandStatusWrapper = record

dCSWSignature:LongWord;  
dCSWTag:LongWord;  
dCSWDataResidue:LongWord;  
bCSWStatus:Byte;  


Function declarations


Initialization functions 

procedure USBStorageInit;
Description: To be documented
Note None documented


USB storage functions 

function USBStorageDeviceRead(Storage:PStorageDevice; const Start,Count:Int64; Buffer:Pointer):LongWord;
Description: To be documented
Note According to 3.4 of USB Mass Storage Bulk Only 1.0, requests must be queued one at a time to a device. 


function USBStorageDeviceWrite(Storage:PStorageDevice; const Start,Count:Int64; Buffer:Pointer):LongWord;
Description: To be documented
Note According to 3.4 of USB Mass Storage Bulk Only 1.0, requests must be queued one at a time to a device. 


function USBStorageDeviceControl(Storage:PStorageDevice; Request:Integer; Argument1:PtrUInt; var Argument2:PtrUInt):LongWord;
Description: To be documented
Note According to 3.4 of USB Mass Storage Bulk Only 1.0, requests must be queued one at a time to a device. 


function USBStorageDriverBind(Device:PUSBDevice; Interrface:PUSBInterface):LongWord;
Description: Bind the Storage driver to a USB device if it is suitable
Device The USB device to attempt to bind to
Interrface The USB interface to attempt to bind to (or nil for whole device)
Return USB_STATUS_SUCCESS if completed, USB_STATUS_DEVICE_UNSUPPORTED if unsupported or another error code on failure. 


function USBStorageDriverUnbind(Device:PUSBDevice; Interrface:PUSBInterface):LongWord;
Description: Unbind the Storage driver from a USB device
Device The USB device to unbind from
Interrface The USB interface to unbind from (or nil for whole device)
Return USB_STATUS_SUCCESS if completed or another error code on failure 


procedure USBStorageReadComplete(Request:PUSBRequest);
Description: Called when a USB request from a USB storage bulk IN endpoint completes
Request The USB request which has completed
Note The thread that submitted the read request will hold the storage lock 


procedure USBStorageWriteComplete(Request:PUSBRequest);
Description: Called when a USB request from a USB storage bulk OUT endpoint completes
Request The USB request which has completed
Note The thread that submitted the write request will hold the storage lock 


procedure USBStorageInterruptComplete(Request:PUSBRequest);
Description: Called when a USB request from a USB storage IN interrupt endpoint completes
Request The USB request which has completed
Note The thread that submitted the interrupt request will hold the storage lock


USB storage helper functions 

function USBStorageCheckDevice(Device:PUSBDevice):Boolean;
Description: Check if the supplied USB device is suitable for detection as a Mass Storage Device
Device The USB device to check
Return True if the device is suitable or False if it is not 


function USBStorageCheckSubclass(Subclass:Byte):Boolean;
Description: To be documented
Note None documented 


function USBStorageCheckProtocol(Protocol:Byte):Boolean;
Description: To be documented
Note None documented 


function USBStorageBlockSizeToBlockShift(BlockSize:LongWord):LongWord;
Description: To be documented
Note None documented 


function USBStoragePatchDevice(Device:PUSBDevice; var Subclass,Protocol:Byte):LongWord;
Description: A function to adjust the subclass and protocol parameters of known defective devices
Note None documented 


function USBStorageFixupDevice(Device:PUSBDevice; var Vendor,Product:String):LongWord;
Description: A function to adjust the vendor and product parameters of known defective devices
Note None documented 


function USBStorageDeviceLock(Device:PUSBDevice; Storage:PUSBStorageDevice):LongWord;
Description: Issue a Prevent Media Removal request to a storage device
Note None documented 


function USBStorageDeviceUnlock(Device:PUSBDevice; Storage:PUSBStorageDevice):LongWord;
Description: Issue a Allow Media Removal request to a storage device
Note None documented 


function USBStorageDeviceLoad(Device:PUSBDevice; Storage:PUSBStorageDevice):LongWord;
Description: Issue a Start Stop request to a storage device
Note None documented 


function USBStorageDeviceEject(Device:PUSBDevice; Storage:PUSBStorageDevice):LongWord;
Description: Issue a Start Stop request to a storage device
Note None documented


USB storage helper functions 

function USBStorageDeviceReset(Device:PUSBDevice; Storage:PUSBStorageDevice):LongWord;
Description: Issue a Storage Reset request to a storage device
Note Reset recovery (5.3.4 in USB Mass Storage Bulk Only 1.0)

For Reset Recovery the host shall issue in the following order: a) a Bulk-Only Mass Storage Reset, b) a Clear Feature HALT to the Bulk-In endpoint, c) a Clear Feature HALT to the Bulk-Out endpoint. This is done in 3 steps. If the reset doesn't succeed, the device should be port reset. 


function USBStorageDeviceGetInfo(Device:PUSBDevice; Storage:PUSBStorageDevice):LongWord;
Description: Obtain basic information about a storage device (Type, Size, State, Product etc)
Note None documented 


function USBStorageDeviceGetStatus(Device:PUSBDevice; Storage:PUSBStorageDevice):LongWord;
Description: Supported by Subclass SCSI/UFI/SFF8070
Note None documented 


function USBStorageDeviceGetMaxLUN(Device:PUSBDevice; Storage:PUSBStorageDevice; var MaxLUN:Byte):LongWord;
Description: Issue a Get Max LUN request to a storage device
Note None documented 


function USBStorageDeviceClearStall(Device:PUSBDevice; Storage:PUSBStorageDevice; Endpoint:PUSBEndpointDescriptor):LongWord;
Description: Issue a USB Clear Feature (HALT) to the supplied endpoint on a storage device
Note None documented 


function USBStorageDeviceInquiry(Device:PUSBDevice; Storage:PUSBStorageDevice; var DeviceType,DeviceFlags:LongWord; var Vendor,Product,Revision:PChar):LongWord;
Description: Issue a SCSI Inquiry command to a LUN on a storage device
Note Supported by Subclass SCSI/UFI/SFF8070 


function USBStorageDeviceRequestSense(Device:PUSBDevice; Storage:PUSBStorageDevice; var SenseKey,ASC,ASCQ:Byte):LongWord;
Description: Issue a SCSI Request Sense command to a LUN on a storage device
Note Supported by Subclass SCSI/UFI/SFF8070 


function USBStorageDeviceReadCapacity(Device:PUSBDevice; Storage:PUSBStorageDevice; var BlockSize,BlockShift:LongWord; var BlockCount:Int64):LongWord;
Description: Issue a SCSI Read Capacity command to a LUN on a storage device
Note Supported by Subclass SCSI/UFI/SFF8070 


function USBStorageDeviceTestUnitReady(Device:PUSBDevice; Storage:PUSBStorageDevice; var DeviceFlags:LongWord):LongWord;
Description: Issue a SCSI Test Unit Ready command to a LUN on a storage device
Note Supported by Subclass SCSI/UFI/SFF8070 


function USBStorageDeviceRead10(Device:PUSBDevice; Storage:PUSBStorageDevice; Start:LongWord; Count:Word;Buffer:Pointer):LongWord;
Description: Issue a SCSI Read10 command to a LUN on a storage device
Note Supported by Subclass SCSI/UFI/SFF8070

Caller must hold the storage lock 


function USBStorageDeviceWrite10(Device:PUSBDevice; Storage:PUSBStorageDevice; Start:LongWord;Count:Word; Buffer:Pointer):LongWord;
Description: Issue a SCSI Write10 command to a LUN on a storage device
Note Supported by Subclass SCSI/UFI/SFF8070

Caller must hold the storage lock 


function USBStorageDeviceRead16(Device:PUSBDevice; Storage:PUSBStorageDevice; const Start,Count:Int64; Buffer:Pointer):LongWord;
Description: Issue a SCSI Read16 command to a LUN on a storage device
Note Supported by Subclass SCSI only (Only on devices > 2TB)

Caller must hold the storage lock 


function USBStorageDeviceWrite16(Device:PUSBDevice; Storage:PUSBStorageDevice; const Start,Count:Int64; Buffer:Pointer):LongWord;
Description: Issue a SCSI Write16 command to a LUN on a storage device
Note Supported by Subclass SCSI only (Only on devices > 2TB)

Caller must hold the storage lock 


function USBStorageDeviceTransport(Device:PUSBDevice; Storage:PUSBStorageDevice; Command:PUSBCommandBlock):LongWord;
Description: Perform the appropriate transport sequence for the device based on subclass and protocol
Note Handles Command / Data / Status phases plus endpoint stall, reset and retry as per the specification. Supported by Subclass SCSI/UFI/SFF8070

Caller must hold the storage lock


Return to Unit Reference

Retrieved from "https://ultibo.org/mediawiki_ultibo_org/index.php?title=Unit_USBSTORAGE&oldid=5861"