Difference between revisions of "Unit Mouse"

From Ultibo.org
Jump to: navigation, search
Line 7: Line 7:
 
'''Ultibo Mouse Interface unit'''
 
'''Ultibo Mouse Interface unit'''
  
−
This unit provides both the Mouse device interface and the generic USB HID mouse driver.
+
'''Mouse Devices'''
 +
 
 +
This unit provides both the Mouse device interface and a generic USB mouse driver.
 +
 
 +
'''USB Mouse Devices'''
 +
 
 +
The USB mouse driver in this unit uses HID Boot Protocol only and has been replaced by the HIDMouse unit which provides complete HID Report Protocol support for USB mice.
 +
 +
This driver will be moved to a separate unit and retained for backwards compatibility only.
  
 
=== Constants ===
 
=== Constants ===

Revision as of 04:41, 2 November 2022

Return to Unit Reference


Description

Ultibo Mouse Interface unit

Mouse Devices

This unit provides both the Mouse device interface and a generic USB mouse driver.

USB Mouse Devices

The USB mouse driver in this unit uses HID Boot Protocol only and has been replaced by the HIDMouse unit which provides complete HID Report Protocol support for USB mice.

This driver will be moved to a separate unit and retained for backwards compatibility only.

Constants


Mouse specific constants MOUSE_*
MOUSE_NAME_PREFIX = 'Mouse'; Name prefix for Mouse Devices


Mouse device type MOUSE_TYPE_*
MOUSE_TYPE_NONE = 0;  
MOUSE_TYPE_USB = 1;  
MOUSE_TYPE_PS2 = 2;  
MOUSE_TYPE_SERIAL = 3;  
 
MOUSE_TYPE_MAX = 3;  


Mouse device state MOUSE_STATE_*
MOUSE_STATE_DETACHED = 0;  
MOUSE_STATE_DETACHING = 1;  
MOUSE_STATE_ATTACHING = 2;  
MOUSE_STATE_ATTACHED = 3;  
 
MOUSE_STATE_MAX = 3;  


Mouse device flag MOUSE_FLAG_*
MOUSE_FLAG_NONE = $00000000;  
MOUSE_FLAG_NON_BLOCK = $00000001; If set device reads are non blocking (Also supported in Flags parameter of MouseReadEx)
MOUSE_FLAG_DIRECT_READ = $00000002; If set device writes mouse data to its local buffer which must be read using MouseDeviceRead
MOUSE_FLAG_SWAP_BUTTONS = $00000004; If set left and right mouse buttons will be swapped in mouse data
MOUSE_FLAG_PEEK_BUFFER = $00000008; Peek at the buffer to see if any data is available, don't remove it. (Used only in Flags parameter of MouseReadEx)
MOUSE_FLAG_SWAP_XY = $00000010; If set swap the X and Y coordinates
MOUSE_FLAG_INVERT_X = $00000020; If set invert the X coordinate
MOUSE_FLAG_INVERT_Y = $00000040; If set invert the Y coordinate
MOUSE_FLAG_SWAP_MAX_XY = $00000080; If set swap the maximum X and Y values
 
Flags supported by MOUSE_CONTROL_GET/SET/CLEAR_FLAG
MOUSE_FLAG_MASK = MOUSE_FLAG_NON_BLOCK or MOUSE_FLAG_DIRECT_READ or MOUSE_FLAG_SWAP_BUTTONS or MOUSE_FLAG_SWAP_XY or MOUSE_FLAG_INVERT_X or MOUSE_FLAG_INVERT_Y or MOUSE_FLAG_SWAP_MAX_XY;


Mouse device control code MOUSE_CONTROL_*
MOUSE_CONTROL_GET_FLAG = 1; Get Flag
MOUSE_CONTROL_SET_FLAG = 2; Set Flag
MOUSE_CONTROL_CLEAR_FLAG = 3; Clear Flag
MOUSE_CONTROL_FLUSH_BUFFER = 4; Flush Buffer
MOUSE_CONTROL_GET_SAMPLE_RATE = 5; Get Sample Rate
MOUSE_CONTROL_SET_SAMPLE_RATE = 6; Set Sample Rate
MOUSE_CONTROL_GET_MAX_X = 7; Get Maximum X value (Only applies to Absolute X values)
MOUSE_CONTROL_GET_MAX_Y = 8; Get Maximum Y value (Only applies to Absolute Y values)
MOUSE_CONTROL_GET_MAX_WHEEL = 9; Get Maximum Wheel value (Only applies to Absolute Wheel values)
MOUSE_CONTROL_GET_MAX_BUTTONS = 10; Get Maximum Buttons mask (eg MOUSE_LEFT_BUTTON or MOUSE_RIGHT_BUTTON etc)
MOUSE_CONTROL_GET_ROTATION = 11; Get Rotation value (0, 90, 180, 270) (Only where supported by the driver)
MOUSE_CONTROL_SET_ROTATION = 12; Set Rotation value (0, 90, 180, 270) (Only where supported by the driver)


Mouse buffer size MOUSE_BUFFER_*
MOUSE_BUFFER_SIZE = 512;  


Mouse sampling rate MOUSE_SAMPLE_*
MOUSE_SAMPLE_RATE = 100; 100 samples/sec


Mouse data definition MOUSE_LEFT_*, MOUSE_RIGHT_*
Values for TMouseData.Buttons
 
MOUSE_LEFT_BUTTON = $0001; The Left mouse button is pressed
MOUSE_RIGHT_BUTTON = $0002; The Right mouse button is pressed
MOUSE_MIDDLE_BUTTON = $0004; The Middle mouse button is pressed
MOUSE_SIDE_BUTTON = $0008; The Side mouse button is pressed
MOUSE_EXTRA_BUTTON = $0010; The Extra mouse button is pressed
MOUSE_TOUCH_BUTTON = $0020; The Touch screen is being touched
MOUSE_ABSOLUTE_X = $0040; The OffsetX value is absolute not relative
MOUSE_ABSOLUTE_Y = $0080; The OffsetY value is absolute not relative
MOUSE_ABSOLUTE_WHEEL = $0100; The OffsetWheel value is absolute not relative


Mouse rotation MOUSE_ROTATION_*
MOUSE_ROTATION_0 = FRAMEBUFFER_ROTATION_0; No rotation
MOUSE_ROTATION_90 = FRAMEBUFFER_ROTATION_90; 90 degree rotation
MOUSE_ROTATION_180 = FRAMEBUFFER_ROTATION_180; 180 degree rotation
MOUSE_ROTATION_270 = FRAMEBUFFER_ROTATION_270; 270 degree rotation


Mouse logging MOUSE_LOG_*
MOUSE_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG; Mouse debugging messages
MOUSE_LOG_LEVEL_INFO = LOG_LEVEL_INFO; Mouse informational messages, such as a device being attached or detached
MOUSE_LOG_LEVEL_WARN = LOG_LEVEL_WARN; Mouse warning messages
MOUSE_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR; Mouse error messages
MOUSE_LOG_LEVEL_NONE = LOG_LEVEL_NONE; No Mouse messages


USB mouse specific constants USBMOUSE_*
USBMOUSE_DRIVER_NAME = 'USB Mouse Driver (HID boot protocol)'; Name of USB mouse driver
 
USBMOUSE_MOUSE_DESCRIPTION = 'USB HID Mouse'; Description of USB mouse device
 
HID Interface Subclass types (See USB HID v1.11 specification)
USB_HID_SUBCLASS_NONE = 0; Section 4.2
USB_HID_SUBCLASS_BOOT = 1; Section 4.2
 
HID Interface Protocol types (See USB HID v1.11 specification)
USB_HID_BOOT_PROTOCOL_NONE = 0; Section 4.3
USB_HID_BOOT_PROTOCOL_KEYBOARD = 1; Section 4.3
USB_HID_BOOT_PROTOCOL_MOUSE = 2; Section 4.3
 
HID Class Descriptor Types (See USB HID v1.11 specification)
USB_HID_DESCRIPTOR_TYPE_HID = $21; Section 7.1
USB_HID_DESCRIPTOR_TYPE_REPORT = $22; Section 7.1
USB_HID_DESCRIPTOR_TYPE_PHYSICAL_DESCRIPTOR = $23; Section 7.1
 
HID Request types
USB_HID_REQUEST_GET_REPORT = $01;  
USB_HID_REQUEST_GET_IDLE = $02;  
USB_HID_REQUEST_GET_PROTOCOL = $03; Section 7.2
USB_HID_REQUEST_SET_REPORT = $09;  
USB_HID_REQUEST_SET_IDLE = $0A;  
USB_HID_REQUEST_SET_PROTOCOL = $0B; Section 7.2
 
HID Protocol types
USB_HID_PROTOCOL_BOOT = 0; Section 7.2.5
USB_HID_PROTOCOL_REPORT = 1; Section 7.2.5
 
HID Report types
USB_HID_REPORT_INPUT = 1; Section 7.2.1
USB_HID_REPORT_OUTPUT = 2; Section 7.2.1
USB_HID_REPORT_FEATURE = 3; Section 7.2.1
 
HID Report IDs
USB_HID_REPORTID_NONE = 0; Section 7.2.1
 
HID Boot Protocol Button bits
USB_HID_BOOT_LEFT_BUTTON = (1 shl 0);  
USB_HID_BOOT_RIGHT_BUTTON = (1 shl 1);  
USB_HID_BOOT_MIDDLE_BUTTON = (1 shl 2);  
USB_HID_BOOT_SIDE_BUTTON = (1 shl 3);  
USB_HID_BOOT_EXTRA_BUTTON = (1 shl 4);  
 
HID Boot Protocol Report data
USB_HID_BOOT_REPORT_SIZE = 3; Appendix B of HID Device Class Definition 1.11
USB_HID_BOOT_DATA_SIZE = 8; Allocate more than the minimum to allow for extra data


Type definitions


Mouse data

PMouseData = ^TMouseData;

TMouseData = record

Buttons:Word; The bitmap of current button values (eg MOUSE_LEFT_BUTTON or MOUSE_RIGHT_BUTTON)
OffsetX:SmallInt; The X offset of the mouse pointer (May be negative, read as absolute if Buttons includes MOUSE_ABSOLUTE_X)
OffsetY:SmallInt; The Y offset of the mouse pointer (May be negative, read as absolute if Buttons includes MOUSE_ABSOLUTE_Y)
OffsetWheel:SmallInt; The X offset of the mouse pointer (May be negative, read as absolute if Buttons includes MOUSE_ABSOLUTE_WHEEL)
MaximumX:Word; The maximum X value of the mouse (Only applicable if Buttons includes MOUSE_ABSOLUTE_X, otherwise must be 0)
MaximumY:Word; The maximum Y value of the mouse (Only applicable if Buttons includes MOUSE_ABSOLUTE_Y, otherwise must be 0)
MaximumWheel:Word; The maximum Wheel value of the mouse (Only applicable if Buttons includes MOUSE_ABSOLUTE_WHEEL, otherwise must be 0)
Reserved:Word; Reserved field (Round structure to 16 bytes)

Mouse buffer

PMouseBuffer = ^TMouseBuffer;

TMouseBuffer = record

Wait:TSemaphoreHandle; Buffer ready semaphore
Start:LongWord; Index of first buffer ready
Count:LongWord; Number of entries ready in buffer
Buffer:array[0..(MOUSE_BUFFER_SIZE - 1)] of TMouseData;  

Mouse properties

PMouseProperties = ^TMouseProperties;

TMouseProperties = record

Flags:LongWord; Device flags (eg MOUSE_FLAG_SWAP_BUTTONS)
Rotation:LongWord; Screen Rotation (eg MOUSE_ROTATION_180)
MaxX:LongWord; Maximum (absolute) X value for the mouse device
MaxY:LongWord; Maximum (absolute) Y value for the mouse device
MaxWheel:LongWord; Maximum (absolute) wheel value for the mouse device
MaxButtons:LongWord; Maximum buttons mask (eg MOUSE_LEFT_BUTTON or MOUSE_RIGHT_BUTTON etc)

Mouse enumeration callback

TMouseEnumerate = function(Mouse:PMouseDevice; Data:Pointer):LongWord;

Mouse notification callback

TMouseNotification = function(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;

Mouse device read

TMouseDeviceRead = function(Mouse:PMouseDevice; Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;

Mouse device update

TMouseDeviceUpdate = function(Mouse:PMouseDevice):LongWord; stdcall;

Mouse device control

TMouseDeviceControl = function(Mouse:PMouseDevice; Request:Integer; Argument1:LongWord; var Argument2:LongWord):LongWord;

Mouse device get properties

TMouseDeviceGetProperties = function(Mouse:PMouseDevice; Properties:PMouseProperties):LongWord; stdcall;

Mouse device types

PMouseDevice = ^TMouseDevice;

TMouseDevice = record

Device Properties
Device:TDevice; The Device entry for this Mouse
Mouse Properties
MouseId:LongWord; Unique Id of this Mouse in the Mouse table
MouseState:LongWord; Mouse state (eg MOUSE_STATE_ATTACHED)
MouseRate:LongWord; Mouse sample rate (Samples per second)
DeviceRead:TMouseDeviceRead; A Device specific DeviceRead method implementing a standard Mouse device interface (Or nil if the default method is suitable)
DeviceUpdate:TMouseDeviceUpdate; A Device specific DeviceUpdate method implementing a standard Mouse device interface (Or nil if the default method is suitable)
DeviceControl:TMouseDeviceControl; A Device specific DeviceControl method implementing a standard Mouse device interface (Or nil if the default method is suitable)
DeviceGetProperties:TMouseDeviceGetProperties; A Device specific DeviceGetProperties method implementing a standard Mouse device interface (Or nil if the default method is suitable)
Driver Properties
Lock:TMutexHandle; Mouse lock
Buffer:TMouseBuffer; Mouse input buffer
Properties:TMouseProperties; Device properties
Statistics Properties
ReceiveCount:LongWord;  
ReceiveErrors:LongWord;  
BufferOverruns:LongWord;  
Internal Properties
Prev:PMouseDevice; Previous entry in Mouse table
Next:PMouseDevice; Next entry in Mouse table

USB HID descriptor

PUSBHIDDescriptor = ^TUSBHIDDescriptor;

TUSBHIDDescriptor = packed record

bLength:Byte;  
bDescriptorType:Byte;  
bcdHID:Word;  
bCountryCode:Byte;  
bNumDescriptors:Byte;  
bHIDDescriptorType:Byte;  
wHIDDescriptorLength:Word;  
Note: Up to two optional bHIDDescriptorType/wHIDDescriptorLength pairs after the Report descriptor details

USB mouse device types

PUSBMouseDevice = ^TUSBMouseDevice;

TUSBMouseDevice = record

Mouse Properties
Mouse:TMouseDevice;  
USB Properties
HIDInterface:PUSBInterface; USB HID Mouse Interface
ReportRequest:PUSBRequest; USB request for mouse report data
ReportEndpoint:PUSBEndpointDescriptor; USB Mouse Interrupt IN Endpoint
HIDDescriptor:PUSBHIDDescriptor; USB HID Descriptor for mouse
ReportDescriptor:Pointer; USB HID Report Descriptor for mouse
PendingCount:LongWord; Number of USB requests pending for this mouse
WaiterThread:TThreadId; Thread waiting for pending requests to complete (for mouse detachment)


Public variables


Mouse logging

MOUSE_DEFAULT_LOG_LEVEL:LongWord = MOUSE_LOG_LEVEL_DEBUG; Minimum level for Mouse messages. Only messages with level greater than or equal to this will be printed.
MOUSE_LOG_ENABLED:Boolean;


Function declarations


Initialization functions 

procedure MouseInit;
Description: Initialize the mouse unit, device table and USB mouse driver
Note Called only during system startup


Mouse functions 

function MousePeek:LongWord;
Description: Peek at the global mouse buffer to see if any data packets are ready
Return ERROR_SUCCESS if packets are ready, ERROR_NO_MORE_ITEMS if not or another error code on failure 


function MouseRead(Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord; inline;
Description: Read mouse data packets from the global mouse buffer
Buffer Pointer to a buffer to copy the mouse data packets to
Size The size of the buffer in bytes (Must be at least TMouseData or greater)
Count The number of mouse data packets copied to the bufferm
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseReadEx(Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: Read mouse data packets from the global mouse buffer
Buffer Pointer to a buffer to copy the mouse data packets to
Size The size of the buffer in bytes (Must be at least TMouseData or greater)
Flags The flags for the behaviour of the read (eg MOUSE_FLAG_NON_BLOCK)
Count The number of mouse data packets copied to the buffer
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseWrite(Buffer:Pointer; Size,Count:LongWord):LongWord;
Description: Write mouse data packets to the global mouse buffer
Buffer Pointer to a buffer to copy the mouse data packets from
Size The size of the buffer in bytes (Must be at least TMouseData or greater)
Count The number of mouse data packets to copy from the buffer
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseFlush:LongWord;
Description: Flush the contents of the global mouse buffer
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseDeviceRead(Mouse:PMouseDevice; Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;
Description: Read mouse data packets from the buffer of the specified mouse
Mouse The mouse device to read from
Buffer Pointer to a buffer to copy the mouse data packets to
Size The size of the buffer in bytes (Must be at least TMouseData or greater)
Count The number of mouse data packets copied to the buffer
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseDeviceUpdate(Mouse:PMouseDevice):LongWord;
Description: Request the specified mouse device to update the current configuration
Mouse The mouse device to update
Return ERROR_SUCCESS if completed or another error code on failure
Note Items updated can include rotation, maximum X, Y and wheel and flags (If supported) 


function MouseDeviceControl(Mouse:PMouseDevice; Request:Integer; Argument1:LongWord; var Argument2:LongWord):LongWord;
Description: Perform a control request on the specified mouse device
Mouse The mouse device to control
Request The request code for the operation (eg MOUSE_CONTROL_GET_FLAG)
Argument1 The first argument for the operation (Dependent on request code)
Argument2 The second argument for the operation (Dependent on request code)
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseDeviceGetProperties(Mouse:PMouseDevice; Properties:PMouseProperties):LongWord;
Description: Get the properties for the specified mouse device
Mouse The mouse device to get properties from
Properties Pointer to a TMouseProperties structure to fill in
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseDeviceSetState(Mouse:PMouseDevice; State:LongWord):LongWord;
Description: Set the state of the specified mouse and send a notification
Mouse The mouse to set the state for
State The new state to set and notify
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseDeviceCreate:PMouseDevice;
Description: Create a new Mouse device entry
Return Pointer to new Mouse device entry or nil if mouse could not be created 


function MouseDeviceCreateEx(Size:LongWord):PMouseDevice;
Description: Create a new Mouse device entry
Size Size in bytes to allocate for new mouse (Including the mouse device entry)
Return Pointer to new Mouse device entry or nil if mouse could not be created 


function MouseDeviceDestroy(Mouse:PMouseDevice):LongWord;
Description: Destroy an existing Mouse device entry
Mouse The mouse device to destroy
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseDeviceRegister(Mouse:PMouseDevice):LongWord;
Description: Register a new Mouse device in the Mouse table
Mouse The mouse device to register
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseDeviceDeregister(Mouse:PMouseDevice):LongWord;
Description: Deregister a Mouse device from the Mouse table
Mouse The mouse device to deregister
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseDeviceFind(MouseId:LongWord):PMouseDevice;
Description: Find a mouse device by ID in the mouse table
MouseId The ID number of the mouse to find
Return Pointer to mouse device entry or nil if not found 


function MouseDeviceFindByName(const Name:String):PMouseDevice; inline;
Description: Find a mouse device by name in the mouse table
Name The name of the mouse to find (eg Mouse0)
Return Pointer to mouse device entry or nil if not found 


function MouseDeviceFindByDescription(const Description:String):PMouseDevice; inline;
Description: Find a mouse device by description in the mouse table
Description The description of the mouse to find (eg USB HID Mouse)
Return Pointer to mouse device entry or nil if not found 


function MouseDeviceEnumerate(Callback:TMouseEnumerate; Data:Pointer):LongWord;
Description: Enumerate all mouse devices in the mouse table
Callback The callback function to call for each mouse in the table
Data A private data pointer to pass to callback for each mouse in the table
Return ERROR_SUCCESS if completed or another error code on failure 


function MouseDeviceNotification(Mouse:PMouseDevice; Callback:TMouseNotification; Data:Pointer; Notification,Flags:LongWord):LongWord;
Description: Register a notification for mouse device changes
Mouse The mouse device to notify changes for (Optional, pass nil for all mice)
Callback The function to call when a notification event occurs
Data A private data pointer to pass to callback when a notification event occurs
Notification The events to register for notification of (eg DEVICE_NOTIFICATION_REGISTER)
Flags The flags to control the notification (eg NOTIFIER_FLAG_WORKER)


RTL console functions 

function SysConsoleHideMouse(AUserData:Pointer):Boolean;
Description: Handler for Platform ConsoleHideMouse function
Note None documented 


function SysConsoleShowMouse(X,Y:LongWord; AUserData:Pointer):Boolean;
Description: Handler for Platform ConsoleShowMouse function
Note None documented 


function SysConsoleReadMouse(var X,Y,Buttons:LongWord; AUserData:Pointer):Boolean;
Description: Handler for Platform ConsoleReadMouse function
Note None documented


USB mouse functions 

function USBMouseDriverBind(Device:PUSBDevice; Interrface:PUSBInterface):LongWord;
Description: Bind the Mouse driver to a USB device if it is suitable
Device The USB device to attempt to bind to
Interrface The USB interface to attempt to bind to (or nil for whole device)
Return USB_STATUS_SUCCESS if completed, USB_STATUS_DEVICE_UNSUPPORTED if unsupported or another error code on failure. 


function USBMouseDriverUnbind(Device:PUSBDevice; Interrface:PUSBInterface):LongWord;
Description: Unbind the Mouse driver from a USB device
Device The USB device to unbind from
Interrface The USB interface to unbind from (or nil for whole device)
Return USB_STATUS_SUCCESS if completed or another error code on failure 


procedure USBMouseReportWorker(Request:PUSBRequest);
Description: Called (by a Worker thread) to process a completed USB request from a USB mouse IN interrupt endpoint
Request The USB request which has completed 


procedure USBMouseReportComplete(Request:PUSBRequest);
Description: Called when a USB request from a USB mouse IN interrupt endpoint completes
Request The USB request which has completed
Note Request is passed to worker thread for processing to prevent blocking the USB completion


Mouse helper functions 

function MouseGetCount:LongWord; inline;
Description: Get the current mouse count
Note None documented 


function MouseDeviceCheck(Mouse:PMouseDevice):PMouseDevice;
Description: Check if the supplied Mouse is in the mouse table
Note None documented 


function MouseDeviceTypeToString(MouseType:LongWord):String;
Description: To be documented
Note None documented 


function MouseDeviceStateToString(MouseState:LongWord):String;
Description: To be documented
Note None documented 


function MouseDeviceRotationToString(Rotation:LongWord):String;
Description: Return a string describing the supplied mouse rotation value
Note None documented 


function MouseDeviceStateToNotification(State:LongWord):LongWord;
Description: Convert a Mouse state value into the notification code for device notifications
Note None documented 


function MouseDeviceResolveRotation(ARotation:LongWord):LongWord;
Description: Resolve a value of 0, 90, 180 or 270 to a mouse rotation constant (eg MOUSE_ROTATION_180)
Note Also accepts passing the mouse rotation constant values directly 


function MouseInsertData(Mouse:PMouseDevice; Data:PMouseData; Signal:Boolean):LongWord;
Description: Insert a TMouseData entry into the mouse buffer (Direct or Global)
Mouse The mouse device to insert data for
Data The TMouseData entry to insert
Signal If True then signal that new data is available in the buffer
Return ERROR_SUCCESS if completed or another error code on failure
Note Caller must hold the mouse lock 


procedure MouseLog(Level:LongWord; Mouse:PMouseDevice; const AText:String);
Description: To be documented
Note None documented 


procedure MouseLogInfo(Mouse:PMouseDevice; const AText:String); inline;
Description: To be documented
Note None documented 


procedure MouseLogWarn(Mouse:PMouseDevice; const AText:String); inline;
Description: To be documented
Note None documented 


procedure MouseLogError(Mouse:PMouseDevice; const AText:String); inline;
Description: To be documented
Note None documented 


procedure MouseLogDebug(Mouse:PMouseDevice;const AText:String); inline;
Description: To be documented
Note None documented


USB mouse helper functions 

function USBMouseCheckDevice(Device:PUSBDevice):Boolean;
Description: Check if the supplied USB device is suitable for detection as a HID Mouse Device
Device The USB device to check
Return True if the device is suitable or False if it is not 


function USBMouseDeviceSetProtocol(Mouse:PUSBMouseDevice; Protocol:Byte):LongWord;
Description: Set the report protocol for a USB mouse device
Mouse The USB mouse device to set the report protocol for
Protocol The report protocol to set (eg USB_HID_PROTOCOL_BOOT)
Return USB_STATUS_SUCCESS if completed or another USB error code on failure 


function USBMouseDeviceGetHIDDescriptor(Mouse:PUSBMouseDevice; Descriptor:PUSBHIDDescriptor):LongWord;
Description: Get the HID Descriptor for a USB mouse device
Mouse The USB mouse device to get the descriptor for
Descriptor Pointer to a USB HID Descriptor structure for the returned data
Return USB_STATUS_SUCCESS if completed or another USB error code on failure 


function USBMouseDeviceGetReportDescriptor(Mouse:PUSBMouseDevice; Descriptor:Pointer; Size:LongWord):LongWord;
Description: Get the Report Descriptor for a USB mouse device
Mouse The USB mouse device to get the descriptor for
Descriptor Pointer to a buffer to return the USB Report Descriptor
Size The size in bytes of the buffer pointed to by Descriptor
Return USB_STATUS_SUCCESS if completed or another USB error code on failure


Return to Unit Reference

Retrieved from "https://ultibo.org/mediawiki_ultibo_org/index.php?title=Unit_Mouse&oldid=5560"