Difference between revisions of "Unit Services"

From Ultibo.org
Jump to: navigation, search
Line 481: Line 481:
 
|-
 
|-
 
| <code>SERVICE_DEFAULT_LOG_LEVEL:LongWord = SERVICE_LOG_LEVEL_DEBUG;</code>
 
| <code>SERVICE_DEFAULT_LOG_LEVEL:LongWord = SERVICE_LOG_LEVEL_DEBUG;</code>
−
| style="width: 65%;"|Minimum level for Service messages. Only messages with level greater than or equal to this will be printed.
+
| style="width: 60%;"|Minimum level for Service messages. Only messages with level greater than or equal to this will be printed.
 
|-
 
|-
 
|}
 
|}
Line 487: Line 487:
 
|-
 
|-
 
| <code>SERVICE_LOG_ENABLED:Boolean;</code>
 
| <code>SERVICE_LOG_ENABLED:Boolean;</code>
−
| style="width: 65%;"|
+
| style="width: 60%;"|
 
|-
 
|-
 
|}
 
|}

Revision as of 02:35, 5 January 2017

Return to Unit Reference


Description

Ultibo Services interface unit

To be documented

Constants


NTP specific constants NTP_*
NTP_VERSION_1 = 1;  
NTP_VERSION_2 = 2;  
NTP_VERSION_3 = 3;  
NTP_VERSION_4 = 4;  
 
NTP_VERSION_MASK = $07; shl 3
 
NTP_VERSION = NTP_VERSION_4; Current NTP/SNTP version
NTP_MIN_VERSION = NTP_VERSION_2; Minimum acceptable NTP/SNTP version
NTP_MAX_VERSION = NTP_VERSION_4; Maximum acceptable NTP/SNTP version
 
NTP_PACKET_SIZE = 48; SizeOf(TNTPPacket)
 
NTP_TIMESTAMP_START = 94354848000000000; Offset between 1/1/1601 (Ultibo) and 1/1/1900 (NTP Timestamp)


NTP leap indicator constants NTP_LEAP_*
NTP_LEAP_NONE = 0;  
NTP_LEAP_LAST_61 = 1;  
NTP_LEAP_LAST_59 = 2;  
NTP_LEAP_ALARM = 3;  
 
NTP_LEAP_MASK = $03; shl 6


NTP mode constants NTP_MODE_*
NTP_MODE_RESERVED = 0; Reserved
NTP_MODE_SYMMETRIC_ACTIVE = 1; Symmetric active
NTP_MODE_SYMMETRIC_PASSIVE = 2; Symmetric passive
NTP_MODE_CLIENT = 3; Client
NTP_MODE_SERVER = 4; Server
NTP_MODE_BROADCAST = 5; Broadcast
NTP_MODE_CONTROL = 6; Reserved for NTP control message
NTP_MODE_PRIVATE = 7; Reserved for private use
 
NTP_MODE_MASK = $07; shl 0


NTP stratum constants NTP_STRATUM_*
NTP_STRATUM_INVALID = 0; unspecified or invalid
NTP_STRATUM_PRIMARY = 1; primary server (e.g., equipped with a GPS receiver)
NTP_STRATUM_SECONDARY2 = 2; secondary server (via NTP)
NTP_STRATUM_SECONDARY3 = 3; secondary server (via NTP)
NTP_STRATUM_SECONDARY4 = 4; secondary server (via NTP)
NTP_STRATUM_SECONDARY5 = 5; secondary server (via NTP)
NTP_STRATUM_SECONDARY6 = 6; secondary server (via NTP)
NTP_STRATUM_SECONDARY7 = 7; secondary server (via NTP)
NTP_STRATUM_SECONDARY8 = 8; secondary server (via NTP)
NTP_STRATUM_SECONDARY9 = 9; secondary server (via NTP)
NTP_STRATUM_SECONDARY10 = 10; secondary server (via NTP)
NTP_STRATUM_SECONDARY11 = 11; secondary server (via NTP)
NTP_STRATUM_SECONDARY12 = 12; secondary server (via NTP)
NTP_STRATUM_SECONDARY13 = 13; secondary server (via NTP)
NTP_STRATUM_SECONDARY14 = 14; secondary server (via NTP)
NTP_STRATUM_SECONDARY15 = 15; secondary server (via NTP)
NTP_STRATUM_UNSYNCRONIZED = 16; unsynchronized
NTP_STRATUM_RESERVED = 17; reserved


Telnet char constants TELNET_CHAR_*
TELNET_CHAR_NUL = #0;  
TELNET_CHAR_CR = #13;  
TELNET_CHAR_LF = #10;  
TELNET_CHAR_TAB = #9;  
TELNET_CHAR_ESC = #27;  
TELNET_CHAR_BACKSPACE = #127;  
 
TELNET_BUFFER_SIZE = SIZE_2K;  


Telnet state constants TELNET_STATE_*
TELNET_STATE_NONE = $00000000;  
TELNET_STATE_TRANSMIT_BINARY = $00000001;  
TELNET_STATE_ECHO = $00000002;  
TELNET_STATE_SUPPRESS_GA = $00000004;  
TELNET_STATE_TERMINAL_TYPE = $00000008;  
TELNET_STATE_WINDOW_SIZE = $00000010;  
TELNET_STATE_TERMINAL_SPEED = $00000020;  
TELNET_STATE_NEW_ENVIRONMENT = $00000040;  


Telnet command constants TELNET_COMMAND_*
TELNET_COMMAND_EOR = 239; 0xEF end of record command
TELNET_COMMAND_SE = 240; 0xF0 end of subnegotiations command
TELNET_COMMAND_NOP = 241; 0xF1 no operation command
TELNET_COMMAND_DM = 242; 0xF2 data mark command
TELNET_COMMAND_BRK = 243; 0xF3 break NVT charater
TELNET_COMMAND_IP = 244; 0xF4 interupt process command
TELNET_COMMAND_AO = 245; 0xF5 abort output command
TELNET_COMMAND_AYT = 246; 0xF6 are you there command
TELNET_COMMAND_EC = 247; 0xF7 erase character command
TELNET_COMMAND_EL = 248; 0xF8 erase line command
TELNET_COMMAND_GA = 249; 0xF9 go ahead command
TELNET_COMMAND_SB = 250; 0xFA begin option subnegotiations command
TELNET_COMMAND_WILL = 251; 0xFB will enable option
TELNET_COMMAND_WONT = 252; 0xFC won't enable option
TELNET_COMMAND_DO = 253; 0xFD request other party enables option
TELNET_COMMAND_DONT = 254; 0xFE request other party doesn't enable option
TELNET_COMMAND_IAC = 255; 0xFF interpret as command


Telnet option constants TELNET_OPTION_*
TELNET_OPTION_TRANSMIT_BINARY = 0; 0x00 transmit binary option
TELNET_OPTION_ECHO = 1; 0x01 echo option
TELNET_OPTION_SUPPRESS_GA = 3; 0x03 suppress go ahead option
TELNET_OPTION_TERMINAL_TYPE = 24; 0x18 terminal type
TELNET_OPTION_WINDOW_SIZE = 31; 0x1F negotiate window size
TELNET_OPTION_TERMINAL_SPEED = 32; 0x20 terminal speed
TELNET_OPTION_NEW_ENVIRONMENT = 39; 0x27 new environment


SysLog facility code constants SYSLOG_FACILITY_*
SYSLOG_FACILITY_KERNEL = 0; kernel messages
SYSLOG_FACILITY_USER = 1; user-level messages
SYSLOG_FACILITY_MAIL = 2; mail system
SYSLOG_FACILITY_SYSTEM = 3; system daemons
SYSLOG_FACILITY_SECURITY = 4; security/authorization messages (note 1)
SYSLOG_FACILITY_SYSLOG = 5; messages generated internally by syslogd
SYSLOG_FACILITY_PRINTER = 6; line printer subsystem
SYSLOG_FACILITY_NEWS = 7; network news subsystem
SYSLOG_FACILITY_UUCP = 8; UUCP subsystem
SYSLOG_FACILITY_CLOCK = 9; clock daemon (note 2)
SYSLOG_FACILITY_AUTH = 10; security/authorization messages (note 1)
SYSLOG_FACILITY_FTP = 11; FTP daemon
SYSLOG_FACILITY_NTP = 12; NTP subsystem
SYSLOG_FACILITY_AUDIT = 13; log audit (note 1)
SYSLOG_FACILITY_ALERT = 14; log alert (note 1)
SYSLOG_FACILITY_CLOCK2 = 15; clock daemon (note 2)
SYSLOG_FACILITY_LOCAL0 = 16; local use 0 (local0)
SYSLOG_FACILITY_LOCAL1 = 17; local use 1 (local1)
SYSLOG_FACILITY_LOCAL2 = 18; local use 2 (local2)
SYSLOG_FACILITY_LOCAL3 = 19; local use 3 (local3)
SYSLOG_FACILITY_LOCAL4 = 20; local use 4 (local4)
SYSLOG_FACILITY_LOCAL5 = 21; local use 5 (local5)
SYSLOG_FACILITY_LOCAL6 = 22; local use 6 (local6)
SYSLOG_FACILITY_LOCAL7 = 23; local use 7 (local7)


SysLog severity code constants SYSLOG_SEVERITY_*
SYSLOG_SEVERITY_EMERGENCY = 0; Emergency: system is unusable
SYSLOG_SEVERITY_ALERT = 1; Alert: action must be taken immediately
SYSLOG_SEVERITY_CRITICAL = 2; Critical: critical conditions
SYSLOG_SEVERITY_ERROR = 3; Error: error conditions
SYSLOG_SEVERITY_WARNING = 4; Warning: warning conditions
SYSLOG_SEVERITY_NOTICE = 5; Notice: normal but significant condition
SYSLOG_SEVERITY_INFORMATION = 6; Informational: informational messages
SYSLOG_SEVERITY_DEBUG = 7; Debug: debug-level messages


Service logging constants SERVICE_LOG_*
SERVICE_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG; Service debugging messages
SERVICE_LOG_LEVEL_INFO = LOG_LEVEL_INFO; Service informational messages, such as a service being created or destroyed
SERVICE_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR; Service error messages
SERVICE_LOG_LEVEL_NONE = LOG_LEVEL_NONE; No Service messages


Type definitions

To be documented

Public variables


Service logging

SERVICE_DEFAULT_LOG_LEVEL:LongWord = SERVICE_LOG_LEVEL_DEBUG; Minimum level for Service messages. Only messages with level greater than or equal to this will be printed.
SERVICE_LOG_ENABLED:Boolean;


Function declarations


Initialization functions 

procedure ServicesInit;
Description: To be documented
Note None documented


NTP functions 

procedure NTPUpdateTime(Client:TNTPClient);
Description: To be documented
Note None documented


SysLog functions 

function SysLogLoggingStart(Logging:PLoggingDevice):LongWord;
Description: To be documented
Note None documented 


function SysLogLoggingStop(Logging:PLoggingDevice):LongWord;
Description: To be documented
Note None documented 


function SysLogLoggingOutput(Logging:PLoggingDevice; const Data:String):LongWord;
Description: To be documented
Note None documented 


function SysLogLoggingOutputEx(Logging:PLoggingDevice; Facility,Severity:LongWord; const Tag,Content:String):LongWord;
Description: To be documented
Note None documented 


function SysLogLoggingGetTarget(Logging:PLoggingDevice):String;
Description: To be documented
Note None documented 


function SysLogLoggingSetTarget(Logging:PLoggingDevice; const Target:String):LongWord;
Description: To be documented
Note None documented


Service helper functions 

procedure ServiceLog(Level:LongWord;const AText:String);
Description: To be documented
Note None documented 


procedure ServiceLogInfo(const AText:String);
Description: To be documented
Note None documented 


procedure ServiceLogError(const AText:String);
Description: To be documented
Note None documented 


procedure ServiceLogDebug(const AText:String);
Description: To be documented
Note None documented


NTP helper functions 

function NTPTimestampToHost(const Timestamp:TNTPTimestamp):TNTPTimestamp;
Description: Convert an NTP Timestamp to Host order
Note None documented 


function NTPTimestampToNetwork(const Timestamp:TNTPTimestamp):TNTPTimestamp;
Description: Convert an NTP Timestamp to Network order
Note None documented 


function NTPTimestampAdd(const Timestamp1,Timestamp2:TNTPTimestamp):TNTPTimestamp;
Description: To be documented
Note Expects Timestamp to be in Host order 


function NTPTimestampSubtract(const Timestamp1,Timestamp2:TNTPTimestamp):TNTPTimestamp;
Description: To be documented
Note Expects Timestamp to be in Host order 


function ClockTimeToNTPTimestamp(const Time:Int64):TNTPTimestamp;
Description: To be documented
Note Returns Timestamp in Host order 


function NTPTimestampToClockTime(const Timestamp:TNTPTimestamp):Int64;
Description: To be documented
Note Expects Timestamp to be in Host order


Telnet helper functions 

function TelnetCommandToString(Command:Byte):String;
Description: To be documented
Note None documented 


function TelnetCommandHasOption(Command:Byte):Boolean;
Description: To be documented
Note None documented 


function TelnetOptionToString(Option:Byte):String;
Description: To be documented
Note None documented


SysLog helper functions 

function FileTimeToSysLogDateTime(const AFileTime:TFileTime):String;
Description: To be documented
Note None documented 


function LoggingFacilityToSysLogFacility(Facility:LongWord):LongWord;
Description: To be documented
Note None documented 


function LoggingSeverityToSysLogSeverity(Severity:LongWord):LongWord;
Description: To be documented
Note None documented


Return to Unit Reference

Retrieved from "https://ultibo.org/mediawiki_ultibo_org/index.php?title=Unit_Services&oldid=2347"