Difference between revisions of "Unit GlobalConst"

Revision as of 05:25, 7 October 2016

`ERROR_SUCCESS = 0;`	Success
`NO_ERROR = 0;`	Success

`ERROR_INVALID_FUNCTION = 1;`	Invalid function
`ERROR_FILE_NOT_FOUND = 2;`	The file cannot be found
`ERROR_PATH_NOT_FOUND = 3;`	The path cannot be found
`ERROR_TOO_MANY_OPEN_FILES = 4;`	Too many open files
`ERROR_ACCESS_DENIED = 5;`	Access is denied
`ERROR_INVALID_HANDLE = 6;`	Invalid handle}
`ERROR_NOT_ENOUGH_MEMORY = DWORD(8);`	Not enough storage is available to process this command

`ERROR_INVALID_ACCESS = 12;`	Invalid access
`ERROR_INVALID_DATA = 13;`	The data is invalid
`ERROR_OUTOFMEMORY = 14;`	Not enough memory is available
`ERROR_INVALID_DRIVE = 15;`	Cannot find the drive specified
`ERROR_CURRENT_DIRECTORY = 16;`	Current directory cannot be removed
`ERROR_NOT_SAME_DEVICE = 17;`	Cannot move the file to a different disk drive
`ERROR_NO_MORE_FILES = 18;`	There are no more files
`ERROR_WRITE_PROTECT = 19;`	Media is write protected
`ERROR_BAD_UNIT = 20;`	Cannot find the device specified
`ERROR_NOT_READY = 21;`	The device is not ready
`ERROR_BAD_COMMAND = 22;`	The device does not recognise the command

`ERROR_WRITE_FAULT = 29;`	The device cannot be written to
`ERROR_READ_FAULT = 30;`	The device cannot be read from
`ERROR_GEN_FAILURE = 31;`	The device has failed

`ERROR_NOT_SUPPORTED = 50;`	The request is not supported

`ERROR_DEV_NOT_EXIST = 55;`	The device does not exist

`ERROR_BAD_DEV_TYPE = 66;`	Invalid device type

`ERROR_ALREADY_ASSIGNED = 85;`	The device name is already in use
`ERROR_INVALID_PASSWORD = 86;`	Invalid pasword
`ERROR_INVALID_PARAMETER = 87;`	Invalid parameter

`ERROR_SEM_IS_SET = 102;`	The semaphore is in use and cannot be closed
`ERROR_OPEN_FAILED = 110;`	The file or device could not be opened
`ERROR_CALL_NOT_IMPLEMENTED = 120;`	The function is not currently implemented
`ERROR_INSUFFICIENT_BUFFER = 122;`	The buffer passed is too small for the requested data
`ERROR_WAIT_NO_CHILDREN = 128;`	There are no child processes to wait for

`ERROR_NOT_LOCKED = 158;`	The entry is not locked

`ERROR_LOCK_FAILED = 167;`	The lock operation failed

`ERROR_ALREADY_EXISTS = 183;`	The file or object already exists

`ERROR_ENVVAR_NOT_FOUND = 203;`	The environment variable could not be found

`ERROR_LOCKED = 212;`	The entry is already locked

`ERROR_MORE_DATA = 234;`	More data is available than the provided buffer

`ERROR_WAIT_TIMEOUT = 258;`	The operation timed out
`ERROR_NO_MORE_ITEMS = 259;`	No more items available

`ERROR_NOT_OWNER = 288;`	The current thread is not the owner

`ERROR_OPERATION_ABORTED = DWORD(995);`	The I/O operation has been aborted because of either a thread exit or an application request
`ERROR_IO_INCOMPLETE = DWORD(996);`	Overlapped I/O event is not in a signaled state
`ERROR_IO_PENDING = DWORD(997);`	Overlapped I/O operation is in progress

`ERROR_CAN_NOT_COMPLETE = 1003;`	Cannot complete the function

`ERROR_NOT_FOUND = 1168;`	The entry or device was not found

`ERROR_INVALID_ACL = DWORD(1336);`	The access control list (ACL) structure is invalid
`ERROR_INVALID_SID = DWORD(1337);`	The security ID structure is invalid
`ERROR_INVALID_SECURITY_DESCR = DWORD(1338);`	The security descriptor structure is invalid

`ERROR_TIMEOUT = 1460;`	The operation returned because the timeout expired

`ERROR_FUNCTION_FAILED = 1627;`	The function call failed

Errors below here have no compatibility equivalent
`ERROR_NOT_VALID = 1000001;`	The entry or device is not valid
`ERROR_NOT_ASSIGNED = 1000002;`	The device is not assigned
`ERROR_IN_USE = 1000003;`	The device is in use
`ERROR_OPERATION_FAILED = 1000004;`	The operation failed
`ERROR_NOT_OPEN = 1000005;`	The file or device is not open
`ERROR_ALREADY_OPEN = 1000006;`	The file or device is already open
`ERROR_WAIT_ABANDONED = 1000007;`	The operation was abandoned
`ERROR_IN_PROGRESS = 1000008;`	An operation is already in progress
`ERROR_RUNTIME_ERROR = 1000009;`	A run time occurred
`ERROR_EXCEPTION = 1000010;`	An exception occurred
`ERROR_NOT_PROCESSED = 1000011;`	The entry has not been processed
`ERROR_NOT_COMPLETED = 1000012;`	The entry or operation has not completed
`ERROR_NOT_COMPATIBLE = 1000013;`	The entry is not compatible for the operation
`ERROR_CANCELLED = 1000014;`	The entry or operation has been cancelled

`ERROR_UNKNOWN = $FFFFFFFF;`

[Expand]

Universal value constants INVALID_*

[Expand]

File position constants FILE_*

[Expand]

File open/create constants CREATE_*

[Expand]

File creation flag constants FILE_FLAG_*

[Expand]

File attribute constants FILE_ATTRIBUTE_*

[Expand]

Filesystem attribute constants FS_*

[Expand]

Timeout constants INFINITE =*

[Expand]

TLS constants TLS_*

[Expand]

Wait constants WAIT_*

[Expand]

Thread state constants STILL_*

[Expand]

TimeZone constants TIME_ZONE_*

[Expand]

Universal key code constants KEY_CODE_*

Keyboard key codes are based on the Unicode standard with each key code mapped to the code point for that character (See http://unicode.org or http://unicode-table.com)
Keyboard keymaps map the scan code value to the key code value for the specific keyboard layout and include alternate mappings for Shift and AltGr
Non character codes for keys like Home, End, Arrows, F1..F24, Shift, Caps Lock etc are mapped in the Unicode Private Use Area (E000-F8FF)
These are the values reported in the KeyCode field of the TKeyboardData structure returned by the KeyboardRead function

Control Characters (0000-001F)
`KEY_CODE_NONE = $0000;`	0
`KEY_CODE_BACKSPACE = $0008;`	8
`KEY_CODE_TAB = $0009;`	9
`KEY_CODE_ENTER = $000D;`	13
`KEY_CODE_ESCAPE = $001B;`	27
`KEY_CODE_DELETE = $007F;`	127

Basic Latin Characters (0020-007F)
Punctuation
`KEY_CODE_SPACE = $0020;`	32
`KEY_CODE_EXCLAMATION = $0021;`	33
`KEY_CODE_QUOTATION = $0022;`	34
`KEY_CODE_NUMBER = $0023;`	35 (Hash / Pound)
`KEY_CODE_DOLLAR = $0024;`	36
`KEY_CODE_PERCENT = $0025;`	37
`KEY_CODE_AMPERSAND = $0026;`	38
`KEY_CODE_APOSTROPHE = $0027;`	39
`KEY_CODE_LEFT_BRACKET = $0028;`	40
`KEY_CODE_RIGHT_BRACKET = $0029;`	41
`KEY_CODE_ASTERISK = $002A;`	42
`KEY_CODE_PLUS = $002B;`	43
`KEY_CODE_COMMA = $002C;`	44
`KEY_CODE_MINUS = $002D;`	45
`KEY_CODE_PERIOD = $002E;`	46
`KEY_CODE_SLASH = $002F;`	47

Numerals
`KEY_CODE_0 = $0030;`	48
`KEY_CODE_1 = $0031;`	49
`KEY_CODE_2 = $0032;`	50
`KEY_CODE_3 = $0033;`	51
`KEY_CODE_4 = $0034;`	52
`KEY_CODE_5 = $0035;`	53
`KEY_CODE_6 = $0036;`	54
`KEY_CODE_7 = $0037;`	55
`KEY_CODE_8 = $0038;`	56
`KEY_CODE_9 = $0039;`	57

Punctuation
`KEY_CODE_COLON = $003A;`	58
`KEY_CODE_SEMICOLON = $003B;`	59
`KEY_CODE_LESSTHAN = $003C;`	60
`KEY_CODE_EQUALS = $003D;`	61
`KEY_CODE_GREATERTHAN = $003E;`	62
`KEY_CODE_QUESTION = $003F;`	63
`KEY_CODE_AT = $0040;`	64

Capital Characters
`KEY_CODE_CAPITAL_A = $0041;`	65
`KEY_CODE_CAPITAL_B = $0042;`	66
`KEY_CODE_CAPITAL_C = $0043;`	67
`KEY_CODE_CAPITAL_D = $0044;`	68
`KEY_CODE_CAPITAL_E = $0045;`	69
`KEY_CODE_CAPITAL_F = $0046;`	70
`KEY_CODE_CAPITAL_G = $0047;`	71
`KEY_CODE_CAPITAL_H = $0048;`	72
`KEY_CODE_CAPITAL_I = $0049;`	73
`KEY_CODE_CAPITAL_J = $004A;`	74
`KEY_CODE_CAPITAL_K = $004B;`	75
`KEY_CODE_CAPITAL_L = $004C;`	76
`KEY_CODE_CAPITAL_M = $004D;`	77
`KEY_CODE_CAPITAL_N = $004E;`	78
`KEY_CODE_CAPITAL_O = $004F;`	79
`KEY_CODE_CAPITAL_P = $0050;`	80
`KEY_CODE_CAPITAL_Q = $0051;`	81
`KEY_CODE_CAPITAL_R= $0052;`	82
`KEY_CODE_CAPITAL_S = $0053;`	83
`KEY_CODE_CAPITAL_T = $0054;`	84
`KEY_CODE_CAPITAL_U = $0055;`	85
`KEY_CODE_CAPITAL_V = $0056;`	86
`KEY_CODE_CAPITAL_W = $0057;`	87
`KEY_CODE_CAPITAL_X = $0058;`	88
`KEY_CODE_CAPITAL_Y = $0059;`	89
`KEY_CODE_CAPITAL_Z = $005A;`	90

Punctuation
`KEY_CODE_LEFT_SQUARE = $005B;`	91
`KEY_CODE_BACKSLASH = $005C;`	92
`KEY_CODE_RIGHT_SQUARE = $005D;`	93
`KEY_CODE_CARET = $005E;`	94 (Circumflex)
`KEY_CODE_UNDERSCORE = $005F;`	95
`KEY_CODE_GRAVE = $0060;`	96

Lowercase Characters
`KEY_CODE_A = $0061;`	97
`KEY_CODE_B = $0062;`	98
`KEY_CODE_C = $0063;`	99
`KEY_CODE_D = $0064;`	100
`KEY_CODE_E = $0065;`	101
`KEY_CODE_F = $0066;`	102
`KEY_CODE_G = $0067;`	103
`KEY_CODE_H = $0068;`	104
`KEY_CODE_I = $0069;`	105
`KEY_CODE_J = $006A;`	106
`KEY_CODE_K = $006B;`	107
`KEY_CODE_L = $006C;`	108
`KEY_CODE_M = $006D;`	109
`KEY_CODE_N = $006E;`	110
`KEY_CODE_O = $006F;`	111
`KEY_CODE_P = $0070;`	112
`KEY_CODE_Q = $0071;`	113
`KEY_CODE_R = $0072;`	114
`KEY_CODE_S = $0073;`	115
`KEY_CODE_T = $0074;`	116
`KEY_CODE_U = $0075;`	117
`KEY_CODE_V = $0076;`	118
`KEY_CODE_W = $0077;`	119
`KEY_CODE_X = $0078;`	120
`KEY_CODE_Y = $0079;`	121
`KEY_CODE_Z = $007A;`	122

Punctuation
`KEY_CODE_LEFT_BRACE = $007B;`	123 (Curly Bracket)
`KEY_CODE_PIPE = $007C;`	124 (Vertical Bar)
`KEY_CODE_RIGHT_BRACE = $007D;`	125 (Curly Bracket)
`KEY_CODE_TILDE = $007E;`	126
`KEY_CODE_DELETE`	(See above)

Latin-1 Supplement Characters (0080-00FF)
`KEY_CODE_INVERTED_EXCLAMATION = $00A1;`
`KEY_CODE_CENT = $00A2;`
`KEY_CODE_POUND = $00A3;`
`KEY_CODE_CURRENCY = $00A4;`
`KEY_CODE_YEN = $00A5;`
`KEY_CODE_BROKEN_BAR = $00A6;`
`KEY_CODE_SECTION = $00A7;`
`KEY_CODE_DIAERESIS = $00A8;`
`KEY_CODE_COPYRIGHT = $00A9;`
`KEY_CODE_FEMININE = $00AA;`
`KEY_CODE_LEFT_DOUBLE_ANGLE = $00AB;`
`KEY_CODE_NOT = $00AC;`
`KEY_CODE_REGISTERED = $00AE;`
`KEY_CODE_MACRON = $00AF;`
`KEY_CODE_DEGREE = $00B0;`
`KEY_CODE_PLUS_MINUS = $00B1;`
`KEY_CODE_SUPERSCRIPT_2 = $00B2;`
`KEY_CODE_SUPERSCRIPT_3 = $00B3;`
`KEY_CODE_ACUTE = $00B4;`
`KEY_CODE_MICRO = $00B5;`
`KEY_CODE_PILCROW = $00B6;`
`KEY_CODE_MIDDLE_DOT = $00B7;`
`KEY_CODE_CEDILLA = $00B8;`
`KEY_CODE_SUPERSCRIPT_1 = $00B9;`
`KEY_CODE_MASCULINE = $00BA;`
`KEY_CODE_RIGHT_DOUBLE_ANGLE = $00BB;`
`KEY_CODE_ONE_QUARTER = $00BC;`
`KEY_CODE_ONE_HALF = $00BD;`
`KEY_CODE_THREE_QUARTER = $00BE;`
`KEY_CODE_INVERTED_QUESTION = $00BF;`
`KEY_CODE_CAPITAL_GRAVE_A = $00C0;`
`KEY_CODE_CAPITAL_ACUTE_A = $00C1;`
`KEY_CODE_CAPITAL_CIRCUMFLEX_A = $00C2;`
`KEY_CODE_CAPITAL_TILDE_A = $00C3;`
`KEY_CODE_CAPITAL_DIAERESIS_A = $00C4;`
`KEY_CODE_CAPITAL_RING_A = $00C5;`
`KEY_CODE_CAPITAL_AE = $00C6;`
`KEY_CODE_CAPITAL_CEDILLA_C = $00C7;`
`KEY_CODE_CAPITAL_GRAVE_E = $00C8;`
`KEY_CODE_CAPITAL_ACUTE_E = $00C9;`
`KEY_CODE_CAPITAL_CIRCUMFLEX_E = $00CA;`
`KEY_CODE_CAPITAL_DIAERESIS_E = $00CB;`
`KEY_CODE_CAPITAL_GRAVE_I = $00CC;`
`KEY_CODE_CAPITAL_ACUTE_I = $00CD;`
`KEY_CODE_CAPITAL_CIRCUMFLEX_I = $00CE;`
`KEY_CODE_CAPITAL_DIAERESIS_I = $00CF;`
`KEY_CODE_CAPITAL_ETH = $00D0;`
`KEY_CODE_CAPITAL_TILDE_N = $00D1;`
`KEY_CODE_CAPITAL_GRAVE_O = $00D2;`
`KEY_CODE_CAPITAL_ACUTE_O = $00D3;`
`KEY_CODE_CAPITAL_CIRCUMFLEX_O = $00D4;`
`KEY_CODE_CAPITAL_TILDE_O = $00D5;`
`KEY_CODE_CAPITAL_DIAERESIS_O = $00D6;`
`KEY_CODE_MULTIPLY = $00D7;`
`KEY_CODE_CAPITAL_STROKE_O = $00D8;`
`KEY_CODE_CAPITAL_GRAVE_U = $00D9;`
`KEY_CODE_CAPITAL_ACUTE_U = $00DA;`
`KEY_CODE_CAPITAL_CIRCUMFLEX_U = $00DB;`
`KEY_CODE_CAPITAL_DIAERESIS_U = $00DC;`
`KEY_CODE_CAPITAL_ACUTE_Y = $00DD;`
`KEY_CODE_CAPITAL_THORN = $00DE;`
`KEY_CODE_SHARP_S = $00DF;`
`KEY_CODE_GRAVE_A = $00E0;`
`KEY_CODE_ACUTE_A = $00E1;`
`KEY_CODE_CIRCUMFLEX_A = $00E2;`
`KEY_CODE_TILDE_A = $00E3;`
`KEY_CODE_DIAERESIS_A = $00E4;`
`KEY_CODE_RING_A = $00E5;`
`KEY_CODE_AE = $00E6;`
`KEY_CODE_CEDILLA_C = $00E7;`
`KEY_CODE_GRAVE_E = $00E8;`
`KEY_CODE_ACUTE_E = $00E9;`
`KEY_CODE_CIRCUMFLEX_E = $00EA;`
`KEY_CODE_DIAERESIS_E = $00EB;`
`KEY_CODE_GRAVE_I = $00EC;`
`KEY_CODE_ACUTE_I = $00ED;`
`KEY_CODE_CIRCUMFLEX_I = $00EE;`
`KEY_CODE_DIAERESIS_I = $00EF;`
`KEY_CODE_ETH = $00F0;`
`KEY_CODE_TILDE_N = $00F1;`
`KEY_CODE_GRAVE_O = $00F2;`
`KEY_CODE_ACUTE_O = $00F3;`
`KEY_CODE_CIRCUMFLEX_O = $00F4;`
`KEY_CODE_TILDE_O = $00F5;`
`KEY_CODE_DIAERESIS_O = $00F6;`
`KEY_CODE_DIVISION = $00F7;`
`KEY_CODE_STROKE_O = $00F8;`
`KEY_CODE_GRAVE_U = $00F9;`
`KEY_CODE_ACUTE_U = $00FA;`
`KEY_CODE_CIRCUMFLEX_U = $00FB;`
`KEY_CODE_DIAERESIS_U = $00FC;`
`KEY_CODE_ACUTE_Y = $00FD;`
`KEY_CODE_THORN = $00FE;`
`KEY_CODE_DIAERESIS_Y = $00FF;`

General Punctuation (2000-206F)
`KEY_CODE_LEFT_QUOTE = $2018;`
`KEY_CODE_RIGHT_QUOTE = $2019;`

Currency Symbols (20A0-20CF)
`KEY_CODE_EURO = $20AC;`

Private Area (E000-F8FF)
Non Character Codes
`KEY_CODE_CAPSLOCK = $E000;`
`KEY_CODE_F1 = $E001;`
`KEY_CODE_F2 = $E002;`
`KEY_CODE_F3 = $E003;`
`KEY_CODE_F4 = $E004;`
`KEY_CODE_F5 = $E005;`
`KEY_CODE_F6 = $E006;`
`KEY_CODE_F7 = $E007;`
`KEY_CODE_F8 = $E008;`
`KEY_CODE_F9 = $E009;`
`KEY_CODE_F10 = $E00A;`
`KEY_CODE_F11 = $E00B;`
`KEY_CODE_F12 = $E00C;`
`KEY_CODE_PRINTSCREEN = $E00D;`
`KEY_CODE_SCROLLLOCK = $E00E;`
`KEY_CODE_PAUSE = $E00F;`
`KEY_CODE_INSERT = $E010;`
`KEY_CODE_HOME = $E011;`
`KEY_CODE_PAGEUP = $E012;`
`KEY_CODE_END = $E013;`
`KEY_CODE_PAGEDN = $E014;`
`KEY_CODE_RIGHT_ARROW = $E015;`
`KEY_CODE_LEFT_ARROW = $E016;`
`KEY_CODE_DOWN_ARROW = $E017;`
`KEY_CODE_UP_ARROW = $E018;`
`KEY_CODE_NUMLOCK = $E019;`
`KEY_CODE_APPLICATION = $E01A;`
`KEY_CODE_POWER = $E01B;`
`KEY_CODE_F13 = $E01C;`
`KEY_CODE_F14 = $E01D;`
`KEY_CODE_F15 = $E01E;`
`KEY_CODE_F16 = $E01F;`
`KEY_CODE_F17 = $E020;`
`KEY_CODE_F18 = $E021;`
`KEY_CODE_F19 = $E022;`
`KEY_CODE_F20 = $E023;`
`KEY_CODE_F21 = $E024;`
`KEY_CODE_F22 = $E025;`
`KEY_CODE_F23 = $E026;`
`KEY_CODE_F24 = $E027;`
`KEY_CODE_EXECUTE = $E028;`
`KEY_CODE_HELP = $E029;`
`KEY_CODE_MENU = $E02A;`
`KEY_CODE_SELECT = $E02B;`
`KEY_CODE_STOP = $E02C;`
`KEY_CODE_AGAIN = $E02D;`
`KEY_CODE_UNDO = $E02E;`
`KEY_CODE_CUT = $E02F;`
`KEY_CODE_COPY = $E030;`
`KEY_CODE_PASTE = $E031;`
`KEY_CODE_FIND = $E032;`
`KEY_CODE_MUTE = $E033;`
`KEY_CODE_VOLUMEUP = $E034;`
`KEY_CODE_VOLUMEDOWN = $E035;`
`KEY_CODE_LOCKING_CAPSLOCK = $E036;`
`KEY_CODE_LOCKING_NUMLOCK = $E037;`
`KEY_CODE_LOCKING_SCROLLLOCK = $E038;`
`KEY_CODE_INTERNATIONAL1 = $E039;`
`KEY_CODE_INTERNATIONAL2 = $E03A;`
`KEY_CODE_INTERNATIONAL3 = $E03B;`
`KEY_CODE_INTERNATIONAL4 = $E03C;`
`KEY_CODE_INTERNATIONAL5 = $E03D;`
`KEY_CODE_INTERNATIONAL6 = $E03E;`
`KEY_CODE_INTERNATIONAL7 = $E03F;`
`KEY_CODE_INTERNATIONAL8 = $E040;`
`KEY_CODE_INTERNATIONAL9 = $E041;`
`KEY_CODE_LANG1 = $E042;`
`KEY_CODE_LANG2 = $E043;`
`KEY_CODE_LANG3 = $E044;`
`KEY_CODE_LANG4 = $E045;`
`KEY_CODE_LANG5 = $E046;`
`KEY_CODE_LANG6 = $E047;`
`KEY_CODE_LANG7 = $E048;`
`KEY_CODE_LANG8 = $E049;`
`KEY_CODE_LANG9 = $E04A;`
`KEY_CODE_ALT_ERASE = $E04B;`
`KEY_CODE_SYSREQ = $E04C;`
`KEY_CODE_CANCEL = $E04D;`
`KEY_CODE_CLEAR = $E04E;`
`KEY_CODE_PRIOR = $E04F;`
`KEY_CODE_RETURN = $E050;`
`KEY_CODE_SEPARATOR = $E051;`
`KEY_CODE_OUT = $E052;`
`KEY_CODE_OPER = $E053;`
`KEY_CODE_CLEAR_AGAIN = $E054;`
`KEY_CODE_CRSEL_PROPS = $E055;`
`KEY_CODE_EXSEL = $E056;`
`KEY_CODE_00 = $E057;`
`KEY_CODE_000 = $E058;`
`KEY_CODE_THOUSANDS_SEPARATOR = $E059;`
`KEY_CODE_DECIMAL_SEPARATOR = $E05A;`
`KEY_CODE_CURRENCY_UNIT = $E05B;`
`KEY_CODE_CURRENCY_SUBUNIT = $E05C;`
`KEY_CODE_XOR = $E05D;`
`KEY_CODE_MEM_STORE = $E05E;`
`KEY_CODE_MEM_RECALL = $E05F;`
`KEY_CODE_MEM_CLEAR = $E060;`
`KEY_CODE_MEM_ADD = $E061;`
`KEY_CODE_MEM_SUBTRACT = $E062;`
`KEY_CODE_MEM_MULTIPLY = $E063;`
`KEY_CODE_MEM_DIVIDE = $E064;`
`KEY_CODE_CLEAR_ENTRY = $E065;`
`KEY_CODE_BINARY = $E066;`
`KEY_CODE_OCTAL = $E067;`
`KEY_CODE_DECIMAL = $E068;`
`KEY_CODE_HEX = $E069;`
`KEY_CODE_CTRL = $E06A;`
`KEY_CODE_SHIFT = $E06B;`
`KEY_CODE_ALT = $E06C;`
`KEY_CODE_GUI = $E06D;`
`KEY_CODE_DOUBLE_AMPERSAND = $E06E;`
`KEY_CODE_DOUBLE_PIPE = $E06F;`
`KEY_CODE_CENTER = $E070;`

`KEY_CODE_TRANSLATE_START = $0080;`	Key codes below this are direct characters in all code pages
`KEY_CODE_PRIVATE_START = $E000;`	Key codes in this range are private area mappings for non character keys
`KEY_CODE_PRIVATE_END = $F8FF;`

[Expand]

Universal scan code constants SCAN_CODE_*

Keyboard scan codes are based on the USB HID Usages (See Section 10 of the Universal Serial Bus HID Usage Tables v1.12)
These are the values reported in the ScanCode field of the TKeyboardData structure returned by the KeyboardRead function
Any keyboard driver supporting legacy keyboards (eg PC/AT or PS/2) should translate the reported codes to be compatible with this set

`SCAN_CODE_NONE = 0;`	Reserved (no event indicated)
`SCAN_CODE_ROLLOVER = 1;`	Keyboard ErrorRollOver
`SCAN_CODE_POSTFAIL = 2;`	Keyboard POSTFail
`SCAN_CODE_ERROR = 3;`	Keyboard ErrorUndefined
`SCAN_CODE_A = 4;`	Keyboard a or A
`SCAN_CODE_B = 5;`	Keyboard b or B
`SCAN_CODE_C = 6;`	Keyboard c or C
`SCAN_CODE_D = 7;`	Keyboard d or D
`SCAN_CODE_E = 8;`	Keyboard e or E
`SCAN_CODE_F = 9;`	Keyboard f or F
`SCAN_CODE_G = 10;`	Keyboard g or G
`SCAN_CODE_H = 11;`	Keyboard h or H
`SCAN_CODE_I = 12;`	Keyboard i or I
`SCAN_CODE_J = 13;`	Keyboard j or J
`SCAN_CODE_K = 14;`	Keyboard k or K
`SCAN_CODE_L = 15;`	Keyboard l or L
`SCAN_CODE_M = 16;`	Keyboard m or M
`SCAN_CODE_N = 17;`	Keyboard n or N
`SCAN_CODE_O = 18;`	Keyboard o or O
`SCAN_CODE_P = 19;`	Keyboard p or P
`SCAN_CODE_Q = 20;`	Keyboard q or Q
`SCAN_CODE_R = 21;`	Keyboard r or R
`SCAN_CODE_S = 22;`	Keyboard s or S
`SCAN_CODE_T = 23;`	Keyboard t or T
`SCAN_CODE_U = 24;`	Keyboard u or U
`SCAN_CODE_V = 25;`	Keyboard v or V
`SCAN_CODE_W = 26;`	Keyboard w or W
`SCAN_CODE_X = 27;`	Keyboard x or X
`SCAN_CODE_Y = 28;`	Keyboard y or Y
`SCAN_CODE_Z = 29;`	Keyboard z or Z
`SCAN_CODE_1 = 30;`	Keyboard 1 or !
`SCAN_CODE_2 = 31;`	Keyboard 2 or @
`SCAN_CODE_3 = 32;`	Keyboard 3 or #
`SCAN_CODE_4 = 33;`	Keyboard 4 or $
`SCAN_CODE_5 = 34;`	Keyboard 5 or %
`SCAN_CODE_6 = 35;`	Keyboard 6 or ^
`SCAN_CODE_7 = 36;`	Keyboard 7 or &
`SCAN_CODE_8 = 37;`	Keyboard 8 or *
`SCAN_CODE_9 = 38;`	Keyboard 9 or (
`SCAN_CODE_0 = 39;`	Keyboard 0 or )
`SCAN_CODE_ENTER = 40;`	Keyboard Enter
`SCAN_CODE_ESCAPE = 41;`	Keyboard Escape
`SCAN_CODE_BACKSPACE = 42;`	Keyboard Backspace
`SCAN_CODE_TAB = 43;`	Keyboard Tab
`SCAN_CODE_SPACE = 44;`	Keyboard Spacebar
`SCAN_CODE_MINUS = 45;`	Keyboard - or _
`SCAN_CODE_EQUALS = 46;`	Keyboard = or +
`SCAN_CODE_LEFT_SQUARE = 47;`	Keyboard [ or Left Brace
`SCAN_CODE_RIGHT_SQUARE = 48;`	Keyboard ] or Right Brace
`SCAN_CODE_BACKSLASH = 49;`
`SCAN_CODE_NONUS_NUMBER = 50;`	Keyboard Non-US # and ~
`SCAN_CODE_SEMICOLON = 51;`	Keyboard ; or :
`SCAN_CODE_APOSTROPHE = 52;`	Keyboard ' or "
`SCAN_CODE_GRAVE = 53;`	Keyboard ` or ~
`SCAN_CODE_COMMA = 54;`	Keyboard , or <
`SCAN_CODE_PERIOD = 55;`	Keyboard . or >
`SCAN_CODE_SLASH = 56;`	Keyboard / or ?
`SCAN_CODE_CAPSLOCK = 57;`	Keyboard Caps Lock
`SCAN_CODE_F1 = 58;`	Keyboard F1
`SCAN_CODE_F2 = 59;`	Keyboard F2
`SCAN_CODE_F3 = 60;`	Keyboard F3
`SCAN_CODE_F4 = 61;`	Keyboard F4
`SCAN_CODE_F5 = 62;`	Keyboard F5
`SCAN_CODE_F6 = 63;`	Keyboard F6
`SCAN_CODE_F7 = 64;`	Keyboard F7
`SCAN_CODE_F8 = 65;`	Keyboard F8
`SCAN_CODE_F9 = 66;`	Keyboard F9
`SCAN_CODE_F10 = 67;`	Keyboard F10
`SCAN_CODE_F11 = 68;`	Keyboard F11
`SCAN_CODE_F12 = 69;`	Keyboard F12
`SCAN_CODE_PRINTSCREEN = 70;`	Keyboard Print Screen
`SCAN_CODE_SCROLLLOCK = 71;`	Keyboard Scroll Lock
`SCAN_CODE_PAUSE = 72;`	Keyboard Pause
`SCAN_CODE_INSERT = 73;`	Keyboard Insert
`SCAN_CODE_HOME = 74;`	Keyboard Home
`SCAN_CODE_PAGEUP = 75;`	Keyboard PageUp
`SCAN_CODE_DELETE = 76;`	Keyboard Delete
`SCAN_CODE_END = 77;`	Keyboard End
`SCAN_CODE_PAGEDN = 78;`	Keyboard PageDn
`SCAN_CODE_RIGHT_ARROW = 79;`	Keyboard Right Arrow
`SCAN_CODE_LEFT_ARROW = 80;`	Keyboard Left Arrow
`SCAN_CODE_DOWN_ARROW = 81;`	Keyboard Down Arrow
`SCAN_CODE_UP_ARROW = 82;`	Keyboard Up Arrow
`SCAN_CODE_NUMLOCK = 83;`	Keyboard Num Lock
`SCAN_CODE_KEYPAD_SLASH = 84;`	Keypad /
`SCAN_CODE_KEYPAD_ASTERISK = 85;`	Keypad *
`SCAN_CODE_KEYPAD_MINUS = 86;`	Keypad -
`SCAN_CODE_KEYPAD_PLUS = 87;`	Keypad +
`SCAN_CODE_KEYPAD_ENTER = 88;`	Keypad Enter
`SCAN_CODE_KEYPAD_1 = 89;`	Keypad 1 and End
`SCAN_CODE_KEYPAD_2 = 90;`	Keypad 2 and Down Arrow
`SCAN_CODE_KEYPAD_3 = 91;`	Keypad 3 and PageDn
`SCAN_CODE_KEYPAD_4 = 92;`	Keypad 4 and Left Arrow
`SCAN_CODE_KEYPAD_5 = 93;`	Keypad 5 and Center
`SCAN_CODE_KEYPAD_6 = 94;`	Keypad 6 and Right Arrow
`SCAN_CODE_KEYPAD_7 = 95;`	Keypad 7 and Home
`SCAN_CODE_KEYPAD_8 = 96;`	Keypad 8 and Up Arrow
`SCAN_CODE_KEYPAD_9 = 97;`	Keypad 9 and PageUp
`SCAN_CODE_KEYPAD_0 = 98;`	Keypad 0 and Insert
`SCAN_CODE_KEYPAD_PERIOD = 99;`	Keypad . and Delete
`SCAN_CODE_NONUS_BACKSLASH = 100;`
`SCAN_CODE_APPLICATION = 101;`	Keyboard Application
`SCAN_CODE_POWER = 102;`	Keyboard Power
`SCAN_CODE_KEYPAD_EQUALS = 103;`	Keypad =
`SCAN_CODE_F13 = 104;`	Keyboard F13
`SCAN_CODE_F14 = 105;`	Keyboard F14
`SCAN_CODE_F15 = 106;`	Keyboard F15
`SCAN_CODE_F16 = 107;`	Keyboard F16
`SCAN_CODE_F17 = 108;`	Keyboard F17
`SCAN_CODE_F18 = 109;`	Keyboard F18
`SCAN_CODE_F19 = 110;`	Keyboard F19
`SCAN_CODE_F20 = 111;`	Keyboard F20
`SCAN_CODE_F2? = 112;`	Keyboard F21
`SCAN_CODE_F22 = 113;`	Keyboard F22
`SCAN_CODE_F23 = 114;`	Keyboard F23
`SCAN_CODE_F24 = 115;`	Keyboard F24
`SCAN_CODE_EXECUTE = 116;`	Keyboard Execute
`SCAN_CODE_HELP = 117;`	Keyboard Help
`SCAN_CODE_MENU = 118;`	Keyboard Menu
`SCAN_CODE_SELECT = 119;`	Keyboard Select
`SCAN_CODE_STOP = 120;`	Keyboard Stop
`SCAN_CODE_AGAIN = 121;`	Keyboard Again
`SCAN_CODE_UNDO = 122;`	Keyboard Undo
`SCAN_CODE_CUT = 123;`	Keyboard Cut
`SCAN_CODE_COPY = 124;`	Keyboard Copy
`SCAN_CODE_PASTE = 125;`	Keyboard Paste
`SCAN_CODE_FIND = 126;`	Keyboard Find
`SCAN_CODE_MUTE = 127;`	Keyboard Mute
`SCAN_CODE_VOLUMEUP = 128;`	Keyboard Volume Up
`SCAN_CODE_VOLUMEDN = 129;`	Keyboard Volume Down
`SCAN_CODE_LOCKING_CAPSLOCK = 130;`	Keyboard Locking Caps Lock
`SCAN_CODE_LOCKING_NUMLOCK = 131;`	Keyboard Locking Num Lock
`SCAN_CODE_LOCKING_SCROLLLOCK = 132;`	Keyboard Locking Scroll Lock
`SCAN_CODE_KEYPAD_COMMA = 133;`	Keypad Comma
`SCAN_CODE_KEYPAD_EQUAL_SIGN = 134;`	Keypad Equal Sign
`SCAN_CODE_INTERNATIONAL? = 135;`	Keyboard International1
`SCAN_CODE_INTERNATIONAL2 = 136;`	Keyboard International2
`SCAN_CODE_INTERNATIONAL3 = 137;`	Keyboard International3
`SCAN_CODE_INTERNATIONAL4 = 138;`	Keyboard International4
`SCAN_CODE_INTERNATIONAL5 = 139;`	Keyboard International5
`SCAN_CODE_INTERNATIONAL6 = 140;`	Keyboard International6
`SCAN_CODE_INTERNATIONAL7 = 141;`	Keyboard International7
`SCAN_CODE_INTERNATIONAL8 = 142;`	Keyboard International8
`SCAN_CODE_INTERNATIONAL9 = 143;`	Keyboard International9
`SCAN_CODE_LANG? = 144;`	Keyboard LANG1
`SCAN_CODE_LANG2 = 145;`	Keyboard LANG2
`SCAN_CODE_LANG3 = 146;`	Keyboard LANG3
`SCAN_CODE_LANG4 = 147;`	Keyboard LANG4
`SCAN_CODE_LANG5 = 148;`	Keyboard LANG5
`SCAN_CODE_LANG6 = 149;`	Keyboard LANG6
`SCAN_CODE_LANG7 = 150;`	Keyboard LANG7
`SCAN_CODE_LANG8 = 151;`	Keyboard LANG8
`SCAN_CODE_LANG9 = 152;`	Keyboard LANG9
`SCAN_CODE_ALT_ERASE = 153;`	Keyboard Alternate Erase
`SCAN_CODE_SYSREQ = 154;`	Keyboard SysReq/Attention
`SCAN_CODE_CANCEL = 155;`	Keyboard Cancel
`SCAN_CODE_CLEAR = 156;`	Keyboard Clear
`SCAN_CODE_PRIOR = 157;`	Keyboard Prior
`SCAN_CODE_RETURN = 158;`	Keyboard Return
`SCAN_CODE_SEPARATOR = 159;`	Keyboard Separator
`SCAN_CODE_OUT = 160;`	Keyboard Out
`SCAN_CODE_OPER = 161;`	Keyboard Oper
`SCAN_CODE_CLEAR_AGAIN = 162;`	Keyboard Clear/Again
`SCAN_CODE_CRSEL_PROPS = 163;`	Keyboard CrSel/Props
`SCAN_CODE_EXSEL = 164;`	Keyboard ExSel
Codes 165 to 175 Reserved
`SCAN_CODE_KEYPAD_00 = 176;`	Keypad 00
`SCAN_CODE_KEYPAD_000 = 177;`	Keypad 000
`SCAN_CODE_THOUSANDS_SEPARATOR = 178;`	Thousands Separator
`SCAN_CODE_DECIMAL_SEPARATOR = 179;`	Decimal Separator
`SCAN_CODE_CURRENCY_UNIT = 180;`	Currency Unit
`SCAN_CODE_CURRENCY_SUBUNIT = 181;`	Currenct Sub-unit
`SCAN_CODE_KEYPAD_LEFT_BRACKET = 182;`	Keypad (
`SCAN_CODE_KEYPAD_RIGHT_BRACKET = 183;`	Keypad )
`SCAN_CODE_KEYPAD_LEFT_BRACE = 184;`	Keypad Left Brace
`SCAN_CODE_KEYPAD_RIGHT_BRACE = 185;`	Keypad Right Brace
`SCAN_CODE_KEYPAD_TAB = 186;`	Keypad Tab
`SCAN_CODE_KEYPAD_BACKSPACE = 187;`	Keypad Backspace
`SCAN_CODE_KEYPAD_A = 188;`	Keypad A
`SCAN_CODE_KEYPAD_B = 189;`	Keypad B
`SCAN_CODE_KEYPAD_C = 190;`	Keypad C
`SCAN_CODE_KEYPAD_D = 191;`	Keypad D
`SCAN_CODE_KEYPAD_E = 192;`	Keypad E
`SCAN_CODE_KEYPAD_F = 193;`	Keypad F
`SCAN_CODE_KEYPAD_XOR = 194;`	Keypad XOR
`SCAN_CODE_KEYPAD_CARET = 195;`	Keypad ^
`SCAN_CODE_KEYPAD_PERCENT = 196;`	Keypad %
`SCAN_CODE_KEYPAD_LESSTHAN = 197;`	Keypad <
`SCAN_CODE_KEYPAD_GREATERTHAN = 198;`	Keypad >
`SCAN_CODE_KEYPAD_AMPERSAND = 199;`	Keypad &
`SCAN_CODE_KEYPAD_DOUBLE_AMPERSAND = 200;`	Keypad &&
`SCAN_CODE_KEYPAD_PIPE = 201;`	Keypad Pipe
`SCAN_CODE_KEYPAD_DOUBLE_PIPE = 202;`	Keypad Double Pipe
`SCAN_CODE_KEYPAD_NUMBER = 204;`	Keypad #
`SCAN_CODE_KEYPAD_SPACE = 205;`	Keypad Space
`SCAN_CODE_KEYPAD_AT = 206;`	Keypad @
`SCAN_CODE_KEYPAD_EXCLAMATION = 207;`	Keypad !
`SCAN_CODE_KEYPAD_MEM_STORE = 208;`	Keypad Memory Store
`SCAN_CODE_KEYPAD_MEM_RECALL = 209;`	Keypad Memory Recall
`SCAN_CODE_KEYPAD_MEM_CLEAR = 210;`	Keypad Memory Clear
`SCAN_CODE_KEYPAD_MEM_ADD = 211;`	Keypad Memory Add
`SCAN_CODE_KEYPAD_MEM_SUB = 212;`	Keypad Memory Subtract
`SCAN_CODE_KEYPAD_MEM_MULTIPLY = 213;`	Keypad Memory Multiply
`SCAN_CODE_KEYPAD_MEM_DIVIDE = 214;`	Keypad Memory Divide
`SCAN_CODE_KEYPAD_PLUS_MINUS = 215;`	Keypad +/-
`SCAN_CODE_KEYPAD_CLEAR = 216;`	Keypad Clear
`SCAN_CODE_KEYPAD_CLEAR_ENTRY = 217;`	Keypad Clear Entry
`SCAN_CODE_KEYPAD_BINARY = 218;`	Keypad Binary
`SCAN_CODE_KEYPAD_OCTAL = 219;`	Keypad Octal
`SCAN_CODE_KEYPAD_DECIMAL = 220;`	Keypad Decimal
`SCAN_CODE_KEYPAD_HEX = 221;`	Keypad Hexadecimal
Codes 222 to 223 Reserved
`SCAN_CODE_LEFT_CTRL = 224;`	Keyboard LeftControl
`SCAN_CODE_LEFT_SHIFT = 225;`	Keyboard LeftShift
`SCAN_CODE_LEFT_ALT = 226;`	Keyboard LeftAlt
`SCAN_CODE_LEFT_GUI = 227;`	Keyboard Left GUI
`SCAN_CODE_RIGHT_CTRL = 228;`	Keyboard RightControl
`SCAN_CODE_RIGHT_SHIFT = 229;`	Keyboard RightShift
`SCAN_CODE_RIGHT_ALT = 230;`	Keyboard RightAlt
`SCAN_CODE_RIGHT_GUI = 231;`	Keyboard Right GUI
Codes 232 to 65535 Reserved

Alternate names for above
`SCAN_CODE_EXCLAMATION = 30;}`	Keyboard 1 or !
`SCAN_CODE_AT = 31;`	Keyboard 2 or @
`SCAN_CODE_NUMBER = 32;`	Keyboard 3 or #
`SCAN_CODE_CURRENCY = 33;`	Keyboard 4 or $
`SCAN_CODE_PERCENT = 34;`	Keyboard 5 or %
`SCAN_CODE_CARET = 35;`	Keyboard 6 or ^
`SCAN_CODE_AMPERSAND = 36;`	Keyboard 7 or &
`SCAN_CODE_ASTERISK = 37;`	Keyboard 8 or *
`SCAN_CODE_LEFT_BRACKET = 38;`	Keyboard 9 or (
`SCAN_CODE_RIGHT_BRACKET = 39;`	Keyboard 0 or )

`SCAN_CODE_DASH = 45;`	Keyboard - or _
`SCAN_CODE_UNDERSCORE = 45;`	Keyboard - or _
`SCAN_CODE_PLUS = 46;`	Keyboard = or +
`SCAN_CODE_LEFT_BRACE = 47;`	Keyboard [ or Left Brace
`SCAN_CODE_RIGHT_BRACE = 48;`	Keyboard ] or Right Brace
`SCAN_CODE_PIPE = 49;`
`SCAN_CODE_NONUS_TILDE = 50;`	Keyboard Non-US # and ~
`SCAN_CODE_COLON = 51;`	Keyboard ; or :
`SCAN_CODE_QUOTATION = 52;`	Keyboard ' or "
`SCAN_CODE_TILDE = 53;`	Keyboard ` or ~
`SCAN_CODE_LESSTHAN = 54;`	Keyboard , or <
`SCAN_CODE_GREATERTHAN = 55;`	Keyboard . or >
`SCAN_CODE_QUESTION = 56;`	Keyboard / or ?

`SCAN_CODE_ALTGR = SCAN_CODE_RIGHT_ALT;`	Keyboard RightAlt

`SCAN_CODE_KEYPAD_FIRST = SCAN_CODE_NUMLOCK;`
`SCAN_CODE_KEYPAD_LAST = SCAN_CODE_KEYPAD_PERIOD;`

[Expand]

Universal color constants COLOR_*

[Expand]

Universal size constants SIZE_*

[Expand]

Universal time constants MILLISECONDS_*

[Expand]

Ultibo time constants TIME_TICKS_*

[Expand]

Unix/Linux time constants UNIX_TIME_*

[Expand]

FreePascal time constants PASCAL_*

[Expand]

System Call constants SYSTEM_CALL_*

[Expand]

Machine Type constants MACHINE_TYPE_*

[Expand]

Board Type constants BOARD_TYPE_*

[Expand]

CPU Arch constants CPU_ARCH_*

[Expand]

CPU Type constants CPU_TYPE_*

[Expand]

CPU Model constants CPU_MODEL_*

[Expand]

CPU Description constants CPU_DESCRIPTION_*

[Expand]

CPU State constants CPU_STATE_*

[Expand]

CPU ID constants CPU_ID_*

[Expand]

CPU Affinity constants CPU_AFFINITY_*

[Expand]

FPU Type constants FPU_TYPE_*

[Expand]

FPU State constants FPU_STATE_*

[Expand]

GPU Type constants GPU_TYPE_*

[Expand]

GPU State constants GPU_STATE_*

[Expand]

Cache Type constants CACHE_TYPE_*

[Expand]

DMA Direction constants DMA_DIR_*

[Expand]

DMA DREQ ID constants DMA_DREQ_ID_*

[Expand]

GPIO Pin constants GPIO_PIN_*

[Expand]

GPIO Function constants GPIO_FUNCTION_*

[Expand]

GPIO Level constants GPIO_LEVEL_*

[Expand]

GPIO Pull constants GPIO_PULL_*

[Expand]

GPIO Trigger constants GPIO_TRIGGER_*

[Expand]

Virtual GPIO Pin constants VIRTUAL_GPIO_PIN_*

[Expand]

Virtual GPIO Function constants VIRTUAL_GPIO_FUNCTION_*

[Expand]

Serial Baud Rate constants SERIAL_BAUD_RATE_*

[Expand]

Serial Data bit constants SERIAL_DATA_*

[Expand]

Serial Stop bit constants SERIAL_STOP_*

[Expand]

Serial Parity constants SERIAL_PARITY_*

[Expand]

Serial Flow Control constants SERIAL_FLOW_*

[Expand]

I2C Address constants I2C_ADDRESS_*

[Expand]

SPI Mode constants SPI_MODE_*

[Expand]

SPI Chip Select constants SPI_CS_*

[Expand]

SPI Clock Phase (CPHA) constants SPI_CLOCK_PHASE_*

[Expand]

SPI Clock Polarity (CPOL) constants SPI_CLOCK_POLARITY_*

[Expand]

SPI Chip Select Polarity (CSPOL) constants SPI_CS_POLARITY_*

[Expand]

Power ID constants POWER_ID_*

[Expand]

Power State constants POWER_STATE_*

[Expand]

Clock ID constants CLOCK_ID_*

[Expand]

Clock State constants CLOCK_STATE_*

[Expand]

Turbo ID constants TURBO_ID_*

[Expand]

Voltage ID constants VOLTAGE_ID_*

[Expand]

Temperature ID constants TEMPERATURE_ID_*

[Expand]

Console Direction constants CONSOLE_DIRECTION_*

[Expand]

Console Position constants CONSOLE_POSITION_*

[Expand]

Framebuffer Depth constants FRAMEBUFFER_DEPTH_*

[Expand]

Framebuffer Pixel Order constants FRAMEBUFFER_ORDER_*

[Expand]

Framebuffer Alpha Mode constants FRAMEBUFFER_MODE_*

[Expand]

Framebuffer Rotation constants FRAMEBUFFER_ROTATION_*

[Expand]

Log Level constants LOG_LEVEL_*

[Expand]

Logging Protocol constants LOGGING_PROTOCOL_*

[Expand]

Logging Facility constants LOGGING_FACILITY_*

`LOGGING_FACILITY_KERNEL = 0;`	Core "kernel" log messages
`LOGGING_FACILITY_PLATFORM = 1;`	Platform log messages
`LOGGING_FACILITY_THREADS = 2;`	Thread log messages
`LOGGING_FACILITY_DEVICES = 3;`	Device log messages
`LOGGING_FACILITY_NETWORK = 4;`	Network log messages
`LOGGING_FACILITY_STORAGE = 5;`	Storage log messages
`LOGGING_FACILITY_FILESYSTEM = 6;`	Filesystem log messages
`LOGGING_FACILITY_KEYBOARD = 7;`	Keyboard log messages
`LOGGING_FACILITY_MOUSE = 8;`	Mouse log messages
`LOGGING_FACILITY_SCSI = 9;`	SCSI log messages
`LOGGING_FACILITY_DMA = 10;`	DMA log messages
`LOGGING_FACILITY_GPIO = 11;`	GPIO log messages
`LOGGING_FACILITY_MMC = 12;`	MMC/SD log messages
`LOGGING_FACILITY_USB = 13;`	USB log messages
`LOGGING_FACILITY_SERVICES = 14;`	Services log messages
`LOGGING_FACILITY_HTTP = 15;`	HTTP log messages
`LOGGING_FACILITY_IMAP = 16;`	IMAP4 log messages
`LOGGING_FACILITY_POP = 17;`	POP3 log messages
`LOGGING_FACILITY_SMTP = 18;`	SMTP log messages
`LOGGING_FACILITY_TELNET = 19;`	Telnet log messages
`LOGGING_FACILITY_SSH = 20;`	SSH log messages
`LOGGING_FACILITY_SHELL = 21;`	Shell log messages
`LOGGING_FACILITY_NTP = 22;`	NTP log messages
`LOGGING_FACILITY_FTP = 23;`	FTP log messages
`LOGGING_FACILITY_RTC = 24;`	RTC log messages
`LOGGING_FACILITY_I2C = 25;`	I2C log messages
`LOGGING_FACILITY_I2S = 26;`	I2S log messages
`LOGGING_FACILITY_PWM = 27;`	PWM log messages
`LOGGING_FACILITY_SERIAL = 28;`	Serial log messages
`LOGGING_FACILITY_SPI = 29;`	SPI log messages
`LOGGING_FACILITY_UART = 30;`	UART log messages
`LOGGING_FACILITY_AUDIO = 31;`	Audio log messages
`LOGGING_FACILITY_1WIRE = 32;`	1-Wire log messages
`LOGGING_FACILITY_TOUCH = 33;`	Touch log messages
`LOGGING_FACILITY_VIDEO = 34;`	Video log messages
`LOGGING_FACILITY_CODEC = 35;`	Codec log messages

`LOGGING_FACILITY_USER = 1000;`	User log messages

`LOGGING_FACILITY_INVALID = $FFFFFFFF;`

[Expand]

Logging Severity constants LOGGING_SEVERITY_*

[Expand]

Handle Type constants HANDLE_TYPE_*

[Expand]

Filesystem Cache Mode constants FILESYS_CACHE_MODE_*

Type definitions

None defined

Public variables

None defined

Function declarations

None defined

Return to Unit Reference

@@ Line 273: / Line 273: @@
 </div></div>
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
 <div style="font-size: 14px; padding-left: 12px;">'''Universal value constants''' <code> INVALID_* </code></div>
@@ Line 294: / Line 293: @@
 </div></div>
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
 <div style="font-size: 14px; padding-left: 12px;">'''File position constants''' <code> FILE_* </code></div>
@@ Line 312: / Line 310: @@
 </div></div>
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
 <div style="font-size: 14px; padding-left: 12px;">'''File open/create constants''' <code> CREATE_* </code></div>
@@ Line 336: / Line 333: @@
 </div></div>
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
 <div style="font-size: 14px; padding-left: 12px;">'''File creation flag constants''' <code> FILE_FLAG_* </code></div>
@@ Line 378: / Line 374: @@
 </div></div>
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
 <div style="font-size: 14px; padding-left: 12px;">'''File attribute constants''' <code> FILE_ATTRIBUTE_* </code></div>
@@ Line 429: / Line 424: @@
 </div></div>
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
 <div style="font-size: 14px; padding-left: 12px;">'''Filesystem attribute constants''' <code> FS_* </code></div>
@@ Line 480: / Line 474: @@
 </div></div>
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
 <div style="font-size: 14px; padding-left: 12px;">'''Timeout constants''' <code> INFINITE =* </code></div>

`INVALID_HANDLE_VALUE = THandle(-1);`	DWORD(-1);
`INVALID_FILE_SIZE = DWORD($FFFFFFFF);`
`INVALID_SET_FILE_POINTER = DWORD(-1);`
`INVALID_FILE_ATTRIBUTES = DWORD(-1);`

`CREATE_NEW = 1;`
`CREATE_ALWAYS = 2;`
`OPEN_EXISTING = 3;`
`OPEN_ALWAYS = 4;`
`TRUNCATE_EXISTING = 5;`

`FILE_FLAG_WRITE_THROUGH = DWORD($80000000);`
`FILE_FLAG_OVERLAPPED = $40000000;`
`FILE_FLAG_NO_BUFFERING = $20000000;`
`FILE_FLAG_RANDOM_ACCESS = $10000000;`
`FILE_FLAG_SEQUENTIAL_SCAN = $08000000;`
`FILE_FLAG_DELETE_ON_CLOSE = $04000000;`
`FILE_FLAG_BACKUP_SEMANTICS = $02000000;`
`FILE_FLAG_POSIX_SEMANTICS = $01000000;`
`FILE_FLAG_OPEN_REPARSE_POINT = $00200000;`
`FILE_FLAG_OPEN_NO_RECALL = $00100000;`
`FILE_FLAG_FIRST_PIPE_INSTANCE = $00080000;`

`FILE_ATTRIBUTE_READONLY = $00000001;`
`FILE_ATTRIBUTE_HIDDEN = $00000002;`
`FILE_ATTRIBUTE_SYSTEM = $00000004;`
`FILE_ATTRIBUTE_DIRECTORY = $00000010;`
`FILE_ATTRIBUTE_ARCHIVE = $00000020;`
`FILE_ATTRIBUTE_DEVICE = $00000040;`
`FILE_ATTRIBUTE_NORMAL = $00000080;`
`FILE_ATTRIBUTE_TEMPORARY = $00000100;`
`FILE_ATTRIBUTE_SPARSE_FILE = $00000200;`
`FILE_ATTRIBUTE_REPARSE_POINT = $00000400;`
`FILE_ATTRIBUTE_COMPRESSED = $00000800;`
`FILE_ATTRIBUTE_OFFLINE = $00001000;`
`FILE_ATTRIBUTE_NOT_CONTENT_INDEXED = $00002000;`
`FILE_ATTRIBUTE_ENCRYPTED = $00004000;`

Difference between revisions of "Unit GlobalConst"

Revision as of 05:25, 7 October 2016

Contents

Description

Constants

Type definitions

Public variables

Function declarations

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

`FS_CASE_SENSITIVE_SEARCH = $00000001;`
`FS_CASE_PRESERVED_NAMES = $00000002;`
`FS_UNICODE_ON_DISK = $00000004;`
`FS_PERSISTENT_ACLS = $00000008;`
`FS_FILE_COMPRESSION = $00000010;`
`FS_VOLUME_QUOTAS = $00000020;`
`FS_SUPPORTS_SPARSE_FILES = $00000040;`
`FS_SUPPORTS_REPARSE_POINTS = $00000080;`
`FS_SUPPORTS_REMOTE_STORAGE = $00000100;`
`FS_VOLUME_IS_COMPRESSED = $00008000;`
`FS_SUPPORTS_OBJECT_IDS = $00010000;`
`FS_SUPPORTS_ENCRYPTION = $00020000;`
`FS_NAMED_STREAMS = $00040000;`
`FS_READ_ONLY_VOLUME = $00080000;`

`WAIT_OBJECT_0 = ERROR_SUCCESS + 0;`
`WAIT_ABANDONED = $00000080 + 0;`	STATUS_ABANDONED_WAIT_0
`WAIT_ABANDONED_0 = $00000080 + 0;`	STATUS_ABANDONED_WAIT_0
`WAIT_TIMEOUT = ERROR_WAIT_TIMEOUT;`
`WAIT_FAILED = DWORD($FFFFFFFF);`

`WAIT_IO_COMPLETION = $000000C0;`	STATUS_USER_APC

`MAXIMUM_WAIT_OBJECTS = 64;`	Maximum number of wait objects

Basic 32 bit RGB colors (8 bit Transparency, 8 bit Red, 8 bit Green, 8 bit Blue)

`COLOR_NONE = $00000000;`
`COLOR_BLACK = $FF000000;`
`COLOR_RED = $FFFF0000;`
`COLOR_ORANGE = $FFFF8500;`
`COLOR_LEAFGREEN = $FF009900;`
`COLOR_GREEN = $FF00FF00;`
`COLOR_YELLOW = $FFFFFF00;`
`COLOR_DARKGREEN = $FF254117;`
`COLOR_DARKGRAY = $FF595959;`
`COLOR_BROWN = $FF6F4E37;`
`COLOR_INDIGO = $FF2E0854;`
`COLOR_RASPBERRY = $FFE30B5C;`
`COLOR_GRAY = $FF808080;`
`COLOR_PURPLE = $FF4B0082;`
`COLOR_PINK = $FFFF0090;`
`COLOR_DARKBLUE = $FF0000A0;`
`COLOR_SILVER = $FFC0C0C0;`
`COLOR_BLUEIVY = $FF3090C7;`
`COLOR_MIDGRAY = $FFE0E0E0;`
`COLOR_LIGHTGRAY = $FFF7F7F7;`
`COLOR_BLUE = $FF0000FF;`
`COLOR_MAGENTA = $FFFF00FF;`
`COLOR_CYAN = $FF00FFFF;`
`COLOR_WHITE = $FFFFFFFF;`

Color format constants
`COLOR_FORMAT_ARGB32 = 0;`	32 bits per pixel Alpha/Red/Green/Blue (ARGB8888)
`COLOR_FORMAT_ABGR32 = 1;`	32 bits per pixel Alpha/Blue/Green/Red (ABGR8888)
`COLOR_FORMAT_RGBA32 = 2;`	32 bits per pixel Red/Green/Blue/Alpha (RGBA8888)
`COLOR_FORMAT_BGRA32 = 3;`	32 bits per pixel Blue/Green/Red/Alpha (BGRA8888)
`COLOR_FORMAT_RGB24 = 4;`	24 bits per pixel Red/Green/Blue (RGB888)
`COLOR_FORMAT_BGR24 = 5;`	24 bits per pixel Blue/Green/Red (BGR888)
`COLOR_FORMAT_RGB18 = 6;`	18 bits per pixel Red/Green/Blue (RGB666)
`COLOR_FORMAT_RGB16 = 7;`	16 bits per pixel Red/Green/Blue (RGB565)
`COLOR_FORMAT_RGB15 = 8;`	15 bits per pixel Red/Green/Blue (RGB555)
`COLOR_FORMAT_RGB8 = 9;`	8 bits per pixel Red/Green/Blue (RGB332)

`COLOR_FORMAT_UNKNOWN = LongWord(-1);`

From /include/linux/sizes.h

`SIZE_0 = $00000000;`
`SIZE_1 = $00000001;`
`SIZE_2 = $00000002;`
`SIZE_4 = $00000004;`
`SIZE_8 = $00000008;`
`SIZE_16 = $00000010;`
`SIZE_32 = $00000020;`
`SIZE_64 = $00000040;`
`SIZE_128 = $00000080;`
`SIZE_256 = $00000100;`
`SIZE_512 = $00000200;`

`SIZE_1K = $00000400;`
`SIZE_2K = $00000800;`
`SIZE_4K = $00001000;`
`SIZE_8K = $00002000;`
`SIZE_16K = $00004000;`
`SIZE_32K = $00008000;`
`SIZE_64K = $00010000;`
`SIZE_128K = $00020000;`
`SIZE_256K = $00040000;`
`SIZE_512K = $00080000;`

`SIZE_1M = $00100000;`
`SIZE_2M = $00200000;`
`SIZE_4M = $00400000;`
`SIZE_8M = $00800000;`
`SIZE_16M = $01000000;`
`SIZE_32M = $02000000;`
`SIZE_64M = $04000000;`
`SIZE_128M = $08000000;`
`SIZE_256M = $10000000;`
`SIZE_512M = $20000000;`

`SIZE_1G = $40000000;`
`SIZE_2G = $80000000;`

`MILLISECONDS_PER_SECOND = 1000;`
`MICROSECONDS_PER_SECOND = 1000000;`
`NANOSECONDS_PER_SECOND = 1000000000;`

100 nanosecond ticks since 1/1/1601
Note: Nanoseconds is 10^9 so 100 nanosecond ticks is 10^7

`TIME_TICKS_PER_MICROSECOND = 10;`	10^7 / 10^6
`TIME_TICKS_PER_MILLISECOND = 10000;`	10^7 / 10^3
`TIME_TICKS_PER_SECOND = 10000000;`	10^7
`TIME_TICKS_PER_MINUTE = 600000000;`	60 * 10^7
`TIME_TICKS_PER_HOUR = 36000000000;`	60 * 60 * 10^7
`TIME_TICKS_PER_DAY = 864000000000;`	24 * 60 * 60 * 10^7

`TIME_TICKS_TO_1899 = 94353120000000000;`	Offset between 1/1/1601 (Ultibo) and 30/12/1899 (FreePascal)
`TIME_TICKS_TO_1970 = 116444736000000000;`	Offset between 1/1/1601 (Ultibo) and 1/1/1970 (Unix/Linux)
`TIME_TICKS_TO_1980 = 119600064000000000;`	Offset between 1/1/1601 (Ultibo) and 1/1/1980 (DOS)
`TIME_TICKS_TO_200? = 126227808000000000;`	Offset between 1/1/1601 (Ultibo) and 1/1/2001 (Clock is assumed not set if time is less than this)

`TIME_TICKS_PER_10MILLISECONDS = 100000;`	10^7 / 10^2

Seconds since 1/1/1970

`UNIX_TIME_SECONDS_PER_DAY = 86400;`	606024;
`UNIX_TIME_DAYS_TO_1970 = 25569.0;`	Offset between 1899 (FreePascal) and 1970 (Unix/Linux)

TDateTime starts at 30/12/1899

`PASCAL_TIME_MILLISECONDS_PER_DAY = 86400000;`	606024*1000;
`PASCAL_TIME_SECONDS_PER_DAY = 86400;`	606024;
`PASCAL_TIME_DOS_TIME_START = 2162688;`	DOS date time value for start of DOS time (1/1/1980)

`PASCAL_DAY_OFFSET = 1.0;`	TDateTime value 1 day
`PASCAL_MINUTE_OFFSET = 0.000694444444444444;`	TDateTime value of 1 minute

`SYSTEM_CALL_UNDEFINED = $00000000;`
`SYSTEM_CALL_CONTEXT_SWITCH = $00000001;`

`MACHINE_TYPE_UNKNOWN = 0;`
`MACHINE_TYPE_BCM2708 = 1;`	Broadcom BCM2708 (Raspberry Pi)
`MACHINE_TYPE_BCM2709 = 2;`	Broadcom BCM2709 (Raspberry Pi 2)
`MACHINE_TYPE_BCM2710 = 3;`	Broadcom BCM2710 (Raspberry Pi 3)

`FILE_BEGIN = 0;`
`FILE_CURRENT = 1;`
`FILE_END = 2;`

`BOARD_TYPE_UNKNOWN = 0;`
`BOARD_TYPE_RPIA = 1;`	Raspberry Pi Model A
`BOARD_TYPE_RPIB = 2;`	Raspberry Pi Model B
`BOARD_TYPE_RPI_COMPUTE = 3;`	Raspberry Pi Compute Module
`BOARD_TYPE_RPIA_PLUS = 4;`	Raspberry Pi Model A+
`BOARD_TYPE_RPIB_PLUS = 5;`	Raspberry Pi Model B+
`BOARD_TYPE_RPI2B = 6;`	Raspberry Pi 2 Model B
`BOARD_TYPE_RPI_ZERO = 7;`	Raspberry Pi Model Zero
`BOARD_TYPE_BPI = 8;`	Banana Pi
`BOARD_TYPE_BPRO = 9;`	Banana Pro
`BOARD_TYPE_BBB_REVC = 10;`	Beagle Bone Black (Revision C)
`BOARD_TYPE_CUBOX_I = 11;`	Cubox i1/i2/i2ex/i4pro/i4x4
`BOARD_TYPE_HUMMINGBOARD = 12;`	Hummingboard
`BOARD_TYPE_CREATOR_CI20 = 13;`	MIPS Creator CI20
`BOARD_TYPE_PCDUINO? = 14;`	pcDuino V1
`BOARD_TYPE_PCDUINO2 = 15;`	pcDuino V2
`BOARD_TYPE_PCDUINO3 = 16;`	pcDuino V3
`BOARD_TYPE_ODROID_C? = 17;`	Odroid C1/C1+
`BOARD_TYPE_ODROID_U2 = 18;`	Odroid U2
`BOARD_TYPE_ODROID_U3 = 19;`	Odroid U3
`BOARD_TYPE_ODROID_XU3 = 20;`	Odroid XU3
`BOARD_TYPE_ODROID_XU4 = 21;`	Odroid XU4
`BOARD_TYPE_PC_X86 = 22;`	PC x86
`BOARD_TYPE_PC_X86_64 = 23;`	PC x86 64bit
`BOARD_TYPE_RPI3B = 24;`	Raspberry Pi 3 Model B

`CPU_ARCH_UNKNOWN = 0;`
`CPU_ARCH_ARM32 = 1;`	ARM Arch 32 (ARMv6/ARMv7)(ARMv8 in 32bit mode)
`CPU_ARCH_ARM64 = 2;`	ARM Arch 64 (ARMv8)

`CPU_TYPE_UNKNOWN = 0;`
`CPU_TYPE_ARMV6 = 1;`	ARMv6 (ARM1176 etc)
`CPU_TYPE_ARMV7 = 2;`	ARMv7 (Cortex A5/A7/A8/A9/A15/A17 etc)
`CPU_TYPE_ARMV8 = 3;`	ARMv8 (Cortex A53/A57/A72 etc)

`CPU_MODEL_UNKNOWN = 0;`
`CPU_MODEL_ARM1176JZFS = 1;`	ARM1176JZF-S
`CPU_MODEL_CORTEX_A5 = 2;`	ARM Cortex-A5
`CPU_MODEL_CORTEX_A7 = 3;`	ARM Cortex-A7
`CPU_MODEL_CORTEX_A8 = 4;`	ARM Cortex-A8
`CPU_MODEL_CORTEX_A9 = 5;}`	ARM Cortex-A9
`CPU_MODEL_CORTEX_A15 = 6;`	ARM Cortex-A15
`CPU_MODEL_CORTEX_A17 = 7;`	ARM Cortex-A17
`CPU_MODEL_CORTEX_A53 = 8;`	ARM Cortex-A53
`CPU_MODEL_CORTEX_A57 = 9;`	ARM Cortex-A57
`CPU_MODEL_CORTEX_A72 = 10;`	ARM Cortex-A72

`CPU_DESCRIPTION_UNKNOWN = 'Unknown';`
`CPU_DESCRIPTION_ARM1176JZFS = 'ARM1176JZF-S';`
`CPU_DESCRIPTION_CORTEX_A5 = 'ARM Cortex-A5';`
`CPU_DESCRIPTION_CORTEX_A5_MP = 'ARM Cortex-A5 MPCore';`
`CPU_DESCRIPTION_CORTEX_A7 = 'ARM Cortex-A7 MPCore';`
`CPU_DESCRIPTION_CORTEX_A8 = 'ARM Cortex-A8';`
`CPU_DESCRIPTION_CORTEX_A9 = 'ARM Cortex-A9';`
`CPU_DESCRIPTION_CORTEX_A9_MP = 'ARM Cortex-A9 MPCore';`
`CPU_DESCRIPTION_CORTEX_A15 = 'ARM Cortex-A15 MPCore';`
`CPU_DESCRIPTION_CORTEX_A17 = 'ARM Cortex-A17 MPCore';`
`CPU_DESCRIPTION_CORTEX_A53 = 'ARM Cortex-A53 MPCore';`
`CPU_DESCRIPTION_CORTEX_A57 = 'ARM Cortex-A57 MPCore';`
`CPU_DESCRIPTION_CORTEX_A72 = 'ARM Cortex-A72 MPCore';`

`CPU_STATE_NONE = (0 shl 0);`
`CPU_STATE_MMU_ENABLED = (1 shl 0);`
`CPU_STATE_DATA_CACHE_ENABLED = (1 shl 1);`
`CPU_STATE_INSTRUCTION_CACHE_ENABLED = (1 shl 2);`
`CPU_STATE_BRANCH_PREDICTION_ENABLED = (1 shl 3);`

`CPU_ID_0 = 0;`
`CPU_ID_? = 1;`
`CPU_ID_2 = 2;`
`CPU_ID_3 = 3;`
`CPU_ID_4 = 4;`
`CPU_ID_5 = 5;`
`CPU_ID_6 = 6;`
`CPU_ID_7 = 7;`
`CPU_ID_8 = 8;`
`CPU_ID_9 = 9;`
`CPU_ID_10 = 10;`
`CPU_ID_1? = 11;`
`CPU_ID_12 = 12;`
`CPU_ID_13 = 13;`
`CPU_ID_14 = 14;`
`CPU_ID_15 = 15;`
`CPU_ID_16 = 16;`
`CPU_ID_17 = 17;`
`CPU_ID_18 = 18;`
`CPU_ID_19 = 19;`
`CPU_ID_20 = 20;`
`CPU_ID_21 = 21;`
`CPU_ID_22 = 22;`
`CPU_ID_23 = 23;`
`CPU_ID_24 = 24;`
`CPU_ID_25 = 25;`
`CPU_ID_26 = 26;`
`CPU_ID_27 = 27;`
`CPU_ID_28 = 28;`
`CPU_ID_29 = 29;`
`CPU_ID_30 = 30;`
`CPU_ID_31 = 31;`

`CPU_ID_ALL = $FFFFFFFF;`

`CPU_AFFINITY_0 = (1 shl CPU_ID_0);`
`CPU_AFFINITY_1 = (1 shl CPU_ID_1);`
`CPU_AFFINITY_2 = (1 shl CPU_ID_2);`
`CPU_AFFINITY_3 = (1 shl CPU_ID_3);`
`CPU_AFFINITY_4 = (1 shl CPU_ID_4);`
`CPU_AFFINITY_5 = (1 shl CPU_ID_5);`
`CPU_AFFINITY_6 = (1 shl CPU_ID_6);`
`CPU_AFFINITY_7 = (1 shl CPU_ID_7);`
`CPU_AFFINITY_8 = (1 shl CPU_ID_8);`
`CPU_AFFINITY_9 = (1 shl CPU_ID_9);`
`CPU_AFFINITY_10 = (1 shl CPU_ID_10);`
`CPU_AFFINITY_11 = (1 shl CPU_ID_11);`
`CPU_AFFINITY_12 = (1 shl CPU_ID_12);`
`CPU_AFFINITY_13 = (1 shl CPU_ID_13);`
`CPU_AFFINITY_14 = (1 shl CPU_ID_14);`
`CPU_AFFINITY_15 = (1 shl CPU_ID_15);`
`CPU_AFFINITY_16 = (1 shl CPU_ID_16);`
`CPU_AFFINITY_17 = (1 shl CPU_ID_17);`
`CPU_AFFINITY_18 = (1 shl CPU_ID_18);`
`CPU_AFFINITY_19 = (1 shl CPU_ID_19);`
`CPU_AFFINITY_20 = (1 shl CPU_ID_20);`
`CPU_AFFINITY_21 = (1 shl CPU_ID_21);`
`CPU_AFFINITY_22 = (1 shl CPU_ID_22);`
`CPU_AFFINITY_23 = (1 shl CPU_ID_23);`
`CPU_AFFINITY_24 = (1 shl CPU_ID_24);`
`CPU_AFFINITY_25 = (1 shl CPU_ID_25);`
`CPU_AFFINITY_26 = (1 shl CPU_ID_26);`
`CPU_AFFINITY_27 = (1 shl CPU_ID_27);`
`CPU_AFFINITY_28 = (1 shl CPU_ID_28);`
`CPU_AFFINITY_29 = (1 shl CPU_ID_29);`
`CPU_AFFINITY_30 = (1 shl CPU_ID_30);`
`CPU_AFFINITY_31 = (1 shl CPU_ID_31);`

`CPU_AFFINITY_NONE = $00000000;`
`CPU_AFFINITY_ALL = $FFFFFFFF;`

`FPU_TYPE_UNKNOWN = 0;`
`FPU_TYPE_SOFT = 1;`
`FPU_TYPE_VFPV2 = 2;`
`FPU_TYPE_VFPV3 = 3;`
`FPU_TYPE_VFPV4 = 4;`

`FPU_STATE_NONE = (0 shl 0);`
`FPU_STATE_ENABLED = (1 shl 0);`

`GPU_TYPE_UNKNOWN = 0;`
`GPU_TYPE_VC4 = 1;`	Broadcom VideoCore IV
`GPU_TYPE_MALI400 = 2;`	ARM Mali 400
`GPU_TYPE_MALI450 = 3;`	ARM Mali 450
`GPU_TYPE_GC880 = 4;`	Vivante GC880
`GPU_TYPE_GC2000 = 5;`	Vivante GC2000

`GPU_STATE_NONE = (0 shl 0);`
`GPU_STATE_ENABLED = (1 shl 0);`

`CACHE_TYPE_NONE = 0;`	No Cache
`CACHE_TYPE_DATA = 1;`	Data Cache Only
`CACHE_TYPE_INSTRUCTION = 2;`	Instruction Cache Only
`CACHE_TYPE_SEPARATE = 3;`	Separate Data and Instruction Caches
`CACHE_TYPE_UNIFIED = 4;`	Unified Data and Instruction Cache

`DMA_DIR_NONE = 0;`	No direction (No special handling by controller)
`DMA_DIR_MEM_TO_MEM = 1;`
`DMA_DIR_MEM_TO_DEV = 2;`
`DMA_DIR_DEV_TO_MEM = 3;`
`DMA_DIR_DEV_TO_DEV = 4;`

`DMA_DREQ_ID_NONE = 0;`	No peripheral gating (memory to memory transfer)
`DMA_DREQ_ID_UART_TX = 1;`
`DMA_DREQ_ID_UART_RX = 2;`
`DMA_DREQ_ID_SPI_TX = 3;`
`DMA_DREQ_ID_SPI_RX = 4;`
`DMA_DREQ_ID_SPI_SLAVE_TX = 5;`
`DMA_DREQ_ID_SPI_SLAVE_RX = 6;`
`DMA_DREQ_ID_PCM_TX = 7;`
`DMA_DREQ_ID_PCM_RX = 8;`
`DMA_DREQ_ID_PWM = 9;`
`DMA_DREQ_ID_MMC = 10;`
`DMA_DREQ_ID_SDHOST = 11;`

`GPIO_PIN_0 = 0;`
`GPIO_PIN_? = 1;`
`GPIO_PIN_2 = 2;`
`GPIO_PIN_3 = 3;`
`GPIO_PIN_4 = 4;`
`GPIO_PIN_5 = 5;`
`GPIO_PIN_6 = 6;`
`GPIO_PIN_7 = 7;`
`GPIO_PIN_8 = 8;`
`GPIO_PIN_9 = 9;`
`GPIO_PIN_10 = 10;`
`GPIO_PIN_1? = 11;`
`GPIO_PIN_12 = 12;`
`GPIO_PIN_13 = 13;`
`GPIO_PIN_14 = 14;`
`GPIO_PIN_15 = 15;`
`GPIO_PIN_16 = 16;`
`GPIO_PIN_17 = 17;`
`GPIO_PIN_18 = 18;`
`GPIO_PIN_19 = 19;`
`GPIO_PIN_20 = 20;`
`GPIO_PIN_21 = 21;`
`GPIO_PIN_22 = 22;`
`GPIO_PIN_23 = 23;`
`GPIO_PIN_24 = 24;`
`GPIO_PIN_25 = 25;`
`GPIO_PIN_26 = 26;`
`GPIO_PIN_27 = 27;`
`GPIO_PIN_28 = 28;`
`GPIO_PIN_29 = 29;`
`GPIO_PIN_30 = 30;`
`GPIO_PIN_31 = 31;`
`GPIO_PIN_32 = 32;`
`GPIO_PIN_33 = 33;`
`GPIO_PIN_34 = 34;`
`GPIO_PIN_35 = 35;`
`GPIO_PIN_36 = 36;`
`GPIO_PIN_37 = 37;`
`GPIO_PIN_38 = 38;`
`GPIO_PIN_39 = 39;`
`GPIO_PIN_40 = 40;`
`GPIO_PIN_41 = 41;`
`GPIO_PIN_42 = 42;`
`GPIO_PIN_43 = 43;`
`GPIO_PIN_44 = 44;`
`GPIO_PIN_45 = 45;`
`GPIO_PIN_46 = 46;`
`GPIO_PIN_47 = 47;`
`GPIO_PIN_48 = 48;`
`GPIO_PIN_49 = 49;`
`GPIO_PIN_50 = 50;`
`GPIO_PIN_51 = 51;`
`GPIO_PIN_52 = 52;`
`GPIO_PIN_53 = 53;`
`GPIO_PIN_54 = 54;`
`GPIO_PIN_55 = 55;`
`GPIO_PIN_56 = 56;`
`GPIO_PIN_57 = 57;`
`GPIO_PIN_58 = 58;`
`GPIO_PIN_59 = 59;`
`GPIO_PIN_60 = 60;`

`GPIO_PIN_MAX = 60;`

`GPIO_PIN_UNKNOWN = LongWord(-1);`

`GPIO_FUNCTION_IN = 0;`
`GPIO_FUNCTION_OUT = 1;`
`GPIO_FUNCTION_ALT0 = 2;`
`GPIO_FUNCTION_ALT1 = 3;`
`GPIO_FUNCTION_ALT2 = 4;`
`GPIO_FUNCTION_ALT3 = 5;`
`GPIO_FUNCTION_ALT4 = 6;`
`GPIO_FUNCTION_ALT5 = 7;`

`GPIO_FUNCTION_UNKNOWN = LongWord(-1);`	Returned by GPIOFunctionGet on error (eg device does not support reading the function state)

`GPIO_LEVEL_LOW = 0;`
`GPIO_LEVEL_HIGH = 1;`

`GPIO_LEVEL_UNKNOWN = LongWord(-1);`	Returned by GPIOInputGet/Wait on error (eg device does not exist)

`GPIO_PULL_NONE = 0;`
`GPIO_PULL_UP = 1;`
`GPIO_PULL_DOWN = 2;`

`GPIO_PULL_UNKNOWN = LongWord(-1);`	Returned by GPIOPullGet on error (eg device does not support reading the PullUp/Down state)

`GPIO_TRIGGER_NONE = 0;`
`GPIO_TRIGGER_LOW = 1;`
`GPIO_TRIGGER_HIGH = 2;`
`GPIO_TRIGGER_RISING = 3;`
`GPIO_TRIGGER_FALLING = 4;`
`GPIO_TRIGGER_ASYNC_RISING = 5;`
`GPIO_TRIGGER_ASYNC_FALLING = 6;`
`GPIO_TRIGGER_EDGE = 7;`

`GPIO_TRIGGER_UNKNOWN = LongWord(-1);`	Passed to GPIO callback event when device does not support determining the trigger source

`VIRTUAL_GPIO_FUNCTION_IN = 0;`
`VIRTUAL_GPIO_FUNCTION_OUT = 1;`

`SERIAL_BAUD_RATE_DEFAULT = 0;`

`SERIAL_BAUD_RATE_STANDARD = 115200;`	If SERIAL_BAUD_RATE_DEFAULT is passed to SerialOpen then this is the baud rate to use
`SERIAL_BAUD_RATE_FALLBACK = 9600;`	The fallback baud rate if SERIAL_BAUD_RATE_STANDARD is not supported by the device

`SERIAL_DATA_8BIT = 8;`
`SERIAL_DATA_7BIT = 7;`
`SERIAL_DATA_6BIT = 6;`
`SERIAL_DATA_5BIT = 5;`