|
|
| Line 85: |
Line 85: |
| | |- | | |- |
| | | <code>PL011_UART_DR_DATA = ($FF shl 0);</code> | | | <code>PL011_UART_DR_DATA = ($FF shl 0);</code> |
| − | | Receive / Transmit data | + | | Receive/Transmit data |
| | |- | | |- |
| | |colspan="2"|<code>PL011_UART_DR_ERROR = PL011_UART_DR_OE or PL011_UART_DR_BE or PL011_UART_DR_PE or PL011_UART_DR_FE;</code> | | |colspan="2"|<code>PL011_UART_DR_ERROR = PL011_UART_DR_OE or PL011_UART_DR_BE or PL011_UART_DR_PE or PL011_UART_DR_FE;</code> |
| Line 219: |
Line 219: |
| | |- | | |- |
| | | <code>PL011_UART_LCRH_EPS = (1 shl 2);</code> | | | <code>PL011_UART_LCRH_EPS = (1 shl 2);</code> |
| − | | Even parity select (0 = odd parity / 1 = even parity) | + | | Even parity select (0 = odd parity/1 = even parity) |
| | |- | | |- |
| | | <code>PL011_UART_LCRH_PEN = (1 shl 1);</code> | | | <code>PL011_UART_LCRH_PEN = (1 shl 1);</code> |
| Line 588: |
Line 588: |
| | |- | | |- |
| | | <code>RSRECR:LongWord;</code> | | | <code>RSRECR:LongWord;</code> |
| − | | Receive Status Register / Error Clear Register | + | | Receive Status Register/Error Clear Register |
| | |- | | |- |
| | | <code>Reserved01:LongWord;</code> | | | <code>Reserved01:LongWord;</code> |
Revision as of 04:18, 13 April 2017
Return to Unit Reference
Description
ARM PrimeCell PL011 UART Driver unit
To be documented
Constants
[Expand]
PL011 specific constants PL011_*
PL011_UART_DESCRIPTION = 'ARM PrimeCell PL011 UART';
|
Description of PL011 device
|
|
|
PL011_UART_MIN_BAUD = 300;
|
Default minimum of 300 baud
|
PL011_UART_MAX_BAUD = 1500000;
|
Default maximum based on 24MHz clock
|
|
|
PL011_UART_MIN_DATABITS = SERIAL_DATA_5BIT;
|
|
PL011_UART_MAX_DATABITS = SERIAL_DATA_8BIT;
|
|
|
|
PL011_UART_MIN_STOPBITS = SERIAL_STOP_1BIT;
|
|
PL011_UART_MAX_STOPBITS = SERIAL_STOP_2BIT;
|
|
|
|
PL011_UART_MAX_PARITY = SERIAL_PARITY_EVEN;
|
|
|
|
PL011_UART_MAX_FLOW = SERIAL_FLOW_RTS_CTS;
|
|
|
|
PL011_UART_CLOCK_RATE = 24000000;
|
|
[Expand]
PL011 UART data PL011_UART_DR_*
| See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html
|
|
|
PL011_UART_DR_OE = (1 shl 11);
|
Overrun error
|
PL011_UART_DR_BE = (1 shl 10);
|
Break error
|
PL011_UART_DR_PE = (1 shl 9);
|
Parity error
|
PL011_UART_DR_FE = (1 shl 8);
|
Framing error
|
PL011_UART_DR_DATA = ($FF shl 0);
|
Receive/Transmit data
|
PL011_UART_DR_ERROR = PL011_UART_DR_OE or PL011_UART_DR_BE or PL011_UART_DR_PE or PL011_UART_DR_FE;
|
[Expand]
PL011 UART receive status/error clear PL011_UART_RSRECR_*
[Expand]
PL011 UART flag PL011_UART_FR_*
| See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html
|
|
|
PL011_UART_FR_RI = (1 shl 8);
|
Unsupported, write zero, read as don't care
|
PL011_UART_FR_TXFE = (1 shl 7);
|
Transmit FIFO empty
|
PL011_UART_FR_RXFF = (1 shl 6);
|
Receive FIFO full
|
PL011_UART_FR_TXFF = (1 shl 5);
|
Transmit FIFO full
|
PL011_UART_FR_RXFE = (1 shl 4);
|
Receive FIFO empty
|
PL011_UART_FR_BUSY = (1 shl 3);
|
UART busy
|
PL011_UART_FR_DCD = (1 shl 2);
|
Unsupported, write zero, read as don't care
|
PL011_UART_FR_DSR = (1 shl 1);
|
Unsupported, write zero, read as don't care
|
PL011_UART_FR_CTS = (1 shl 0);
|
Clear to send (This bit is the complement of the UART clear to send, nUARTCTS, modem status input. That is, the bit is 1 when nUARTCTS is LOW)
|
[Expand]
PL011 UART integer baud rate divisor PL011_UART_IBRD_*
[Expand]
PL011 UART fractional baud rate divisor PL011_UART_FBRD_*
[Expand]
PL011 UART line control PL011_UART_LCRH_*
| See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html
|
|
|
PL011_UART_LCRH_SPS = (1 shl 7);
|
Stick parity select
|
PL011_UART_LCRH_WLEN = (3 shl 5);
|
Word length
|
PL011_UART_LCRH_WLEN8 = (3 shl 5);
|
8 bits
|
PL011_UART_LCRH_WLEN7 = (2 shl 5);
|
7 bits
|
PL011_UART_LCRH_WLEN6 = (1 shl 5);
|
6 bits
|
PL011_UART_LCRH_WLEN5 = (0 shl 5);
|
5 bits
|
PL011_UART_LCRH_FEN = (1 shl 4);
|
Enable FIFOs
|
PL011_UART_LCRH_STP2 = (1 shl 3);
|
Two stop bits select
|
PL011_UART_LCRH_EPS = (1 shl 2);
|
Even parity select (0 = odd parity/1 = even parity)
|
PL011_UART_LCRH_PEN = (1 shl 1);
|
Parity enable
|
PL011_UART_LCRH_BRK = (1 shl 0);
|
Send break
|
[Expand]
PL011 UART control PL011_UART_CR_*
| See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html
|
|
|
PL011_UART_CR_CTSEN = (1 shl 15);
|
CTS hardware flow control enable (If this bit is set to 1 data is only transmitted when the nUARTCTS signal is asserted)
|
PL011_UART_CR_RTSEN = (1 shl 14);
|
RTS hardware flow control enable (If this bit is set to 1 data is only requested when there is space in the receive FIFO for it to be received)
|
PL011_UART_CR_OUT2 = (1 shl 13);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_CR_OUT1 = (1 shl 12);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_CR_RTS = (1 shl 11);
|
Request to send (This bit is the complement of the UART request to send, nUARTRTS, modem status output. That is, when the bit is programmed to a 1 then nUARTRTS is LOW).
|
PL011_UART_CR_DTR = (1 shl 10);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_CR_RXE = (1 shl 9);
|
Receive enable
|
PL011_UART_CR_TXE = (1 shl 8);
|
Transmit enable
|
PL011_UART_CR_LBE = (1 shl 7);
|
Loopback enable
|
| Bits 6:3 Reserved - Write as 0, read as don't care
|
PL011_UART_CR_SIRLP = (1 shl 2);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_CR_SIREN = (1 shl 1);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_CR_UARTEN = (1 shl 0);
|
UART enable
|
[Expand]
PL011 UART interrupt FIFO level select PL011_UART_IFLS_*
| See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html
|
|
|
PL011_UART_IFLS_RXIFPSEL = (7 shl 9);
|
Unsupported, write zero, read as don't care
|
PL011_UART_IFLS_TXIFPSEL = (7 shl 6);
|
Unsupported, write zero, read as don't care
|
PL011_UART_IFLS_RXIFLSEL = (7 shl 3);
|
Receive interrupt FIFO level select
|
PL011_UART_IFLS_RXIFLSEL1_8 = (0 shl 3);
|
b000 = Receive FIFO becomes 1/8 full
|
PL011_UART_IFLS_RXIFLSEL1_4 = (1 shl 3);
|
b001 = Receive FIFO becomes 1/4 full
|
PL011_UART_IFLS_RXIFLSEL1_2 = (2 shl 3);
|
b010 = Receive FIFO becomes 1/2 full
|
PL011_UART_IFLS_RXIFLSEL3_4 = (3 shl 3);
|
b011 = Receive FIFO becomes 3/4 full
|
PL011_UART_IFLS_RXIFLSEL7_8 = (4 shl 3);
|
b100 = Receive FIFO becomes 7/8 full
|
PL011_UART_IFLS_TXIFLSEL = (7 shl 0);
|
Transmit interrupt FIFO level select
|
PL011_UART_IFLS_TXIFLSEL1_8 = (0 shl 0);
|
b000 = Transmit FIFO becomes 1/8 full
|
PL011_UART_IFLS_TXIFLSEL1_4 = (1 shl 0);
|
b001 = Transmit FIFO becomes 1/4 full
|
PL011_UART_IFLS_TXIFLSEL1_2 = (2 shl 0);
|
b010 = Transmit FIFO becomes 1/2 full
|
PL011_UART_IFLS_TXIFLSEL3_4 = (3 shl 0);
|
b011 = Transmit FIFO becomes 3/4 full
|
PL011_UART_IFLS_TXIFLSEL7_8 = (4 shl 0);
|
b100 = Transmit FIFO becomes 7/8 full
|
[Expand]
PL011 UART interrupt mask set/clear PL011_UART_IMSC_*
| See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html
|
|
|
PL011_UART_IMSC_OEIM = (1 shl 10);
|
Overrun error interrupt mask
|
PL011_UART_IMSC_BEIM = (1 shl 9);
|
Break error interrupt mask
|
PL011_UART_IMSC_PEIM = (1 shl 8);
|
Parity error interrupt mask
|
PL011_UART_IMSC_FEIM = (1 shl 7);
|
Framing error interrupt mask
|
PL011_UART_IMSC_RTIM = (1 shl 6);
|
Receive timeout interrupt mask
|
PL011_UART_IMSC_TXIM = (1 shl 5);
|
Transmit interrupt mask
|
PL011_UART_IMSC_RXIM = (1 shl 4);
|
Receive interrupt mask
|
PL011_UART_IMSC_DSRMIM = (1 shl 3);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_IMSC_DCDMIM = (1 shl 2);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_IMSC_CTSMIM = (1 shl 1);
|
nUARTCTS modem interrupt mask
|
PL011_UART_IMSC_RIMIM = (1 shl 0);
|
Unsupported, write zero, read as don't care.
|
[Expand]
PL011 UART raw interrupt status PL011_UART_RIS_*
| See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html
|
|
|
PL011_UART_RIS_OERIS = (1 shl 10);
|
Overrun error interrupt status
|
PL011_UART_RIS_BERIS = (1 shl 9);
|
Break error interrupt status
|
PL011_UART_RIS_PERIS = (1 shl 8);
|
Parity error interrupt status
|
PL011_UART_RIS_FERIS = (1 shl 7);
|
Framing error interrupt status
|
PL011_UART_RIS_RTRIS = (1 shl 6);
|
Receive timeout interrupt status
|
PL011_UART_RIS_TXRIS = (1 shl 5);
|
Transmit interrupt status
|
PL011_UART_RIS_RXRIS = (1 shl 4);
|
Receive interrupt status
|
PL011_UART_RIS_DSRMRIS = (1 shl 3);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_RIS_DCDMRIS = (1 shl 2);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_RIS_CTSMRIS = (1 shl 1);
|
nUARTCTS modem interrupt status
|
PL011_UART_RIS_RIMRIS = (1 shl 0);
|
Unsupported, write zero, read as don't care.
|
[Expand]
PL011 UART masked interrupt status PL011_UART_MIS_*
| See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html
|
|
|
PL011_UART_MIS_OEMIS = (1 shl 10);
|
Overrun error masked interrupt status
|
PL011_UART_MIS_BEMIS = (1 shl 9);
|
Break error masked interrupt status
|
PL011_UART_MIS_PEMIS = (1 shl 8);
|
Parity error masked interrupt status
|
PL011_UART_MIS_FEMIS = (1 shl 7);
|
Framing error masked interrupt status
|
PL011_UART_MIS_RTMIS = (1 shl 6);
|
Receive timeout masked interrupt status
|
PL011_UART_MIS_TXMIS = (1 shl 5);
|
Transmit masked interrupt status
|
PL011_UART_MIS_RXMIS = (1 shl 4);
|
Receive masked interrupt status
|
PL011_UART_MIS_DSRMMIS = (1 shl 3);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_MIS_DCDMMIS = (1 shl 2);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_MIS_CTSMMIS = (1 shl 1);
|
nUARTCTS modem masked interrupt status
|
PL011_UART_MIS_RIMMIS = (1 shl 0);
|
Unsupported, write zero, read as don't care.
|
[Expand]
PL011 UART interrupt clear PL011_UART_ICR_*
| See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html
|
|
|
PL011_UART_ICR_OEIC = (1 shl 10);
|
Overrun error interrupt clear
|
PL011_UART_ICR_BEIC = (1 shl 9);
|
Break error interrupt clear
|
PL011_UART_ICR_PEIC = (1 shl 8);
|
Parity error interrupt clear
|
PL011_UART_ICR_FEIC = (1 shl 7);
|
Framing error interrupt clear
|
PL011_UART_ICR_RTIC = (1 shl 6);
|
Receive timeout interrupt clear
|
PL011_UART_ICR_TXIC = (1 shl 5);
|
Transmit interrupt clear
|
PL011_UART_ICR_RXIC = (1 shl 4);
|
Receive interrupt clear
|
PL011_UART_ICR_DSRMIC = (1 shl 3);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_ICR_DCDMIC = (1 shl 2);
|
Unsupported, write zero, read as don't care.
|
PL011_UART_ICR_CTSMIC = (1 shl 1);
|
nUARTCTS modem interrupt clear
|
PL011_UART_ICR_RIMIC = (1 shl 0);
|
Unsupported, write zero, read as don't care.
|
[Expand]
PL011 UART DMA Control
[Expand]
PL011 UART test control
[Expand]
PL011 UART integration test input
[Expand]
PL011 UART integration test output
Type definitions
PL011 UART registers
[Expand]
PPL011UARTRegisters = ^TPL011UARTRegisters;
TPL011UARTRegisters = record
| Note: Layout of the PL011 registers (See: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0183g/index.html)
|
DR:LongWord;
|
Data Register
|
RSRECR:LongWord;
|
Receive Status Register/Error Clear Register
|
Reserved01:LongWord;
|
|
Reserved02:LongWord;
|
|
Reserved03:LongWord;
|
|
Reserved04:LongWord;
|
|
FR:LongWord;
|
Flag register
|
Reserved05:LongWord;
|
|
ILPR:LongWord;
|
IrDA Low-Power Counter Register
|
IBRD:LongWord;
|
Integer Baud rate divisor
|
FBRD:LongWord;
|
Fractional Baud rate divisor
|
LCRH:LongWord;
|
Line Control register
|
CR:LongWord;
|
Control register
|
IFLS:LongWord;
|
Interrupt FIFO Level Select Register
|
IMSC:LongWord;
|
Interrupt Mask Set Clear Register
|
RIS:LongWord;
|
Raw Interrupt Status Register
|
MIS:LongWord;
|
Masked Interrupt Status Register
|
ICR:LongWord;
|
Interrupt Clear Register
|
DMACR:LongWord;
|
DMA Control Register
|
Reserved11:LongWord;
|
|
Reserved12:LongWord;
|
|
Reserved13:LongWord;
|
|
Reserved14:LongWord;
|
|
Reserved15:LongWord;
|
|
Reserved16:LongWord;
|
|
Reserved17:LongWord;
|
|
Reserved18:LongWord;
|
|
Reserved19:LongWord;
|
|
Reserved1A:LongWord;
|
|
Reserved1B:LongWord;
|
|
Reserved1C:LongWord;
|
|
Reserved1D:LongWord;
|
|
ITCR:LongWord;
|
Test Control Register
|
ITIP:LongWord;
|
Integration Test Input Register
|
ITOP:LongWord;
|
Integration Test Output Register
|
TDR:LongWord;
|
Test Data Register
|
PL011 UART properties
[Expand]
PPL011UART = ^TPL011UART;
TPL011UART = record
| UART Properties
|
UART:TUARTDevice;
|
|
| PL011 Properties
|
IRQ:LongWord;
|
|
ClockRate:LongWord;
|
Device clock rate
|
Registers:PPL011UARTRegisters;
|
Device registers
|
| Statistics Properties
|
InterruptCount:LongWord;
|
Number of interrupt requests received by the device
|
Public variables
None defined
Function declarations
PL011 functions
[Expand]
function PL011UARTCreate(Address:LongWord; const Name:String; IRQ,ClockRate:LongWord):PUARTDevice;
Description: Create and register a new PL011 UART device which can be accessed using the UART API
| Address
|
The address of the PL011 registers
|
| Name
|
The text description of this device which will show in the device list (Optional)
|
| IRQ
|
The interrupt number for the PL011
|
| ClockRate
|
The clock source frequency for the PL011
|
| Return
|
Pointer to the new UART device or nil if the UART device could not be created
|
[Expand]
function PL011UARTDestroy(UART:PUARTDevice):LongWord;
Description: Close, deregister and destroy a PL011 UART device created by this driver
| UART
|
The UART device to destroy
|
| Return
|
ERROR_SUCCESS if completed or another error code on failure
|
PL011 UART functions
[Expand]
function PL011UARTOpen(UART:PUARTDevice; BaudRate,DataBits,StopBits,Parity,FlowControl:LongWord):LongWord;
Description: Implementation of UARTDeviceOpen API for PL011 UART
| Note
|
Not intended to be called directly by applications, use UARTDeviceOpen instead
|
[Expand]
function PL011UARTClose(UART:PUARTDevice):LongWord;
Description: Implementation of UARTDeviceClose API for PL011 UART
| Note
|
Not intended to be called directly by applications, use UARTDeviceClose instead
|
[Expand]
function PL011UARTRead(UART:PUARTDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: Implementation of UARTDeviceRead API for PL011 UART
| Note
|
Not intended to be called directly by applications, use UARTDeviceRead instead
|
[Expand]
function PL011UARTWrite(UART:PUARTDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: Implementation of UARTDeviceWrite API for PL011 UART
| Note
|
Not intended to be called directly by applications, use UARTDeviceWrite instead
|
[Expand]
function PL011UARTStatus(UART:PUARTDevice):LongWord;
Description: Implementation of UARTDeviceStatus API for PL011 UART
| Note
|
Not intended to be called directly by applications, use UARTDeviceStatus instead
|
[Expand]
procedure PL011UARTInterruptHandler(UART:PUARTDevice);
Description: To be documented
[Expand]
procedure PL011UARTReceive(UART:PUARTDevice);
Description: To be documented
[Expand]
procedure PL011UARTTransmit(UART:PUARTDevice);
Description: To be documented
Return to Unit Reference
