Difference between revisions of "Supported Hardware"

Latest revision as of 00:02, 29 November 2022

Peripheral	Type	Status	Notes	Unit
DMA	DMA controller	Supported		BCM2708
GPIO	GPIO controller	Supported		BCM2708
SDHCI	eMMC/SD/SDIO host controller	Supported	Primary eMMC/SD controller	BCM2708
SDHOST	eMMC/SD host controller	Supported	Secondary eMMC/SD controller	BCMSDHOST
USB	DWCOTG host controller	Supported		DWCOTG
IRQ	Interrupt controller	Supported		Platform
FIQ	Interrupt controller	Supported		Platform
Timer	System timer	Planned	Used internally by Ultibo core
ARM Timer	ARM SP804 Timer	Supported		BCM2708
UART0	PL011 UART device	Supported		BCM2708
UART1	Mini (AUX) UART device	Planned
BSC0	I2C controller	Supported		BCM2708
BSC1	I2C controller	Supported		BCM2708
BSC2	I2C controller	Supported	Dedicated to the HDMI interface	BCM2708
SPI0	SPI master device	Supported		BCM2708
SPI1	AUX SPI master device	Planned
SPI2	AUX SPI master device	Planned
PCM/I2S	PCM/I2S audio controller	Planned
SPI Slave	SPI slave device	Not planned	Device is faulty
BSC Slave	I2C slave device	Supported		BCM2708
PWM	PWM controller	Supported		BCM2708
PWM Audio	PWM audio output	Planned
Random	Random Number Generator	Supported		BCM2708
Watchdog	Watchdog Timer	Supported		BCM2708
USB OTG	USB On-The-Go mode	Planned	A/A+/Zero/ZeroW/CM1 only
WiFi	BCM43438 WiFi controller	In progress	ZeroW only
Bluetooth	BCM43438 Bluetooth host	Planned	ZeroW only
LAN	SMSC LAN9512/14 network	Supported	B/B+ only	SMSC95XX
Firmware	Mailbox	Supported		Platform
	Clock (On/Off/Rate/Min/Max)	Supported		Platform
	Power (On/Off)	Supported		Platform
	Voltage (Value/Min/Max)	Supported		Platform
	Temperature	Supported		Platform
VC4 GPU	Framebuffer	Supported		BCM2708
	DispmanX	Supported
	OpenGLES	Supported
	OpenMAX	Supported
	MMAL	Supported
	OpenVG	Supported		OpenVG
	VCHIQ	Supported		VC4VCHIQ
	HDMI CEC	Supported
	GENCMD	Supported	Firmware information and diagnostics
LEDs	Power and Activity	Supported	Not available on Zero/ZeroW	Platform

Raspberry Pi 2B/3B/CM3/3B+/3A+/CM3+/Zero2W

Peripheral	Type	Status	Notes	Unit
DMA	DMA controller	Supported		BCM2709 / BCM2710
GPIO	GPIO controller	Supported		BCM2709 / BCM2710
SDHCI	eMMC/SD/SDIO host controller	Supported	Primary eMMC/SD controller	BCM2709 / BCM2710
SDHOST	eMMC/SD host controller	Supported	Secondary eMMC/SD controller	BCMSDHOST
USB	DWCOTG host controller	Supported		DWCOTG
IRQ	Interrupt controller	Supported		Platform
FIQ	Interrupt controller	Supported		Platform
Timer	System timer	Planned	Used internally by Ultibo core
ARM Timer	ARM SP804 Timer	Supported		BCM2709 / BCM2710
Local Timer	Local peripheral timer	Planned
Local Mailbox	Inter processor mailboxes	Planned
Generic Timer	ARM generic timer	Planned	Used internally by Ultibo core
UART0	PL011 UART device	Supported		BCM2709 / BCM2710
UART1	Mini (AUX) UART device	Planned
BSC0	I2C controller	Supported		BCM2709 / BCM2710
BSC1	I2C controller	Supported		BCM2709 / BCM2710
BSC2	I2C controller	Supported	Dedicated to the HDMI interface	BCM2709 / BCM2710
SPI0	SPI master device	Supported		BCM2709 / BCM2710
SPI1	AUX SPI master device	Planned
SPI2	AUX SPI master device	Planned
PCM/I2S	PCM/I2S audio controller	Planned
SPI Slave	SPI slave device	Not planned	Device is faulty
BSC Slave	I2C slave device	Supported		BCM2709 / BCM2710
PWM	PWM controller	Supported		BCM2709 / BCM2710
PWM Audio	PWM audio output	Planned
Random	Random Number Generator	Supported		BCM2709 / BCM2710
Watchdog	Watchdog Timer	Supported		BCM2709 / BCM2710
USB OTG	USB On-The-Go mode	Planned	CM3 only
WiFi	BCM43438 WiFi controller	In progress	3B/3B+/3A+/Zero2W only
Bluetooth	BCM43438 Bluetooth host	Planned	3B/3B+/3A+/Zero2W only
LAN	SMSC LAN9514 network	Supported		SMSC95XX
	Microchip LAN78XX network	Supported	3B+ only	LAN78XX
Firmware	Mailbox	Supported		Platform
	Clock (On/Off/Rate/Min/Max)	Supported		Platform
	Power (On/Off)	Supported		Platform
	Voltage (Value/Min/Max)	Supported		Platform
	Temperature	Supported		Platform
	Virtual GPIO	Supported	3B/CM3/3B+/3A+/CM3+ only	Platform
	GPIO Expander	Supported	3B/CM3/3B+/3A+/CM3+ only	Platform / RPiGPIOExpander
VC4 GPU	Framebuffer	Supported		BCM2709 / BCM2710
	DispmanX	Supported
	OpenGLES	Supported
	OpenMAX	Supported
	MMAL	Supported
	OpenVG	Supported		OpenVG
	VCHIQ	Supported		VC4VCHIQ
	HDMI CEC	Supported
	GENCMD	Supported	Firmware information and diagnostics
LEDs	Power and Activity	Supported	Requires RPiGPIOExpander unit for 3B/3B+/3A+	Platform

Raspberry Pi 4B/400/CM4

Peripheral	Type	Status	Notes	Unit
DMA	DMA controller	Supported	Includes DMA 40-bit channel support	BCM2711
GPIO	GPIO controller	Supported		BCM2711
MMC0	eMMC/SD/SDIO host controller	Supported		BCM2711
MMC1	eMMC/SD host controller	Supported		BCMSDHOST
MMC2	eMMC/SD host controller	Supported		BCM2711
USB	DWCOTG host controller	Supported	Available on USB-C port only	DWCOTG
USB	XHCI host controller	In progress		XHCI
PCIe	PCIe host controller	In progress		BRCMSTBPCIE
IRQ	Interrupt controller	Supported		Platform
FIQ	Interrupt controller	Supported		Platform
IPI	Software interrupt	Supported		Platform
LPAE	Large Physical Address Extension	Supported		Platform
Timer	System timer	Planned	Used internally by Ultibo core
ARM Timer	ARM SP804 Timer	Supported		BCM2711
Local Timer	Local peripheral timer	Planned
Local Mailbox	Inter processor mailboxes	Planned
Generic Timer	ARM generic timer	Planned	Used internally by Ultibo core
UART0	PL011 UART device	Supported		BCM2711
UART1	Mini (AUX) UART device	Planned
UART2	PL011 UART device	Supported		BCM2711
UART3	PL011 UART device	Supported		BCM2711
UART4	PL011 UART device	Supported		BCM2711
UART5	PL011 UART device	Supported		BCM2711
I2C0	I2C controller	Supported		BCM2711
I2C1	I2C controller	Supported		BCM2711
I2C2	I2C controller	Supported	Dedicated to the HDMI interface	BCM2711
I2C3	I2C controller	Supported		BCM2711
I2C4	I2C controller	Supported		BCM2711
I2C5	I2C controller	Supported		BCM2711
I2C6	I2C controller	Supported		BCM2711
I2C7	I2C controller	Supported	Dedicated to the HDMI interface	BCM2711
SPI0	SPI master device	Supported		BCM2711
SPI1	AUX SPI master device	Planned
SPI2	AUX SPI master device	Planned
SPI3	SPI master device	Supported		BCM2711
SPI4	SPI master device	Supported		BCM2711
SPI5	SPI master device	Supported		BCM2711
SPI6	SPI master device	Supported		BCM2711
PCM/I2S	PCM/I2S audio controller	Planned
SPI Slave	SPI slave device	Planned
I2C Slave	I2C slave device	Supported		BCM2711
PWM0	PWM controller	Supported		BCM2711
PWM1	PWM controller	Supported		BCM2711
PWM Audio	PWM audio output	Planned
RTC	Real time clock	Planned	Included on CM4 IO board	PCF85063
Random	Random Number Generator	Supported		BCM2711
Watchdog	Watchdog Timer	Supported		BCM2711
USB OTG	DWCOTG USB On-The-Go mode	Planned		DWCOTG
WiFi	BCM43438 WiFi controller	In progress
Bluetooth	BCM43438 Bluetooth host	Planned
LAN	Broadcom BCM54213PE	Supported		GENET
Firmware	Mailbox	Supported		Platform
	Clock (On/Off/Rate/Min/Max)	Supported		Platform
	Power (On/Off)	Supported		Platform
	Voltage (Value/Min/Max)	Supported		Platform
	Temperature	Supported		Platform
	Virtual GPIO	Supported		Platform
	GPIO Expander	Supported		Platform / RPiGPIOExpander
VC6 GPU	Framebuffer	Supported	Includes multiple framebuffer support (HDMI/DSI/Composite)	BCM2711
	DispmanX	Supported
	OpenGLES	Planned
	OpenMAX	Planned
	MMAL	Planned
	OpenVG	Planned		OpenVG
	VCHIQ	Supported		VC4VCHIQ
	HDMI CEC	Supported
	GENCMD	Supported	Firmware information and diagnostics
LEDs	Power and Activity	Supported	Requires RPiGPIOExpander unit for 4B/400/CM4	Platform

QEMU Versatile PB

Peripheral	Type	Status	Notes	Unit
DMA	ARM PL080 DMA controller	Planned
GPIO	ARM PL061 GPIO controller	Not planned
RTC	ARM PL031 Real time clock	Supported		PL031
IRQ	PL190 Interrupt controller	Supported		Platform
FIQ	PL190 Interrupt controller	Supported		Platform
Timer0	ARM SP804 Timer	Planned	Used internally by Ultibo core
Timer1	ARM SP804 Timer	Planned
Timer2	ARM SP804 Timer	Planned	Used internally by Ultibo core
Timer3	ARM SP804 Timer	Planned
UART0	ARM PL011 UART device	Supported		PL011
UART1	ARM PL011 UART device	Supported		PL011
UART2	ARM PL011 UART device	Supported		PL011
UART3	ARM PL011 UART device	Supported		PL011
MMC0	ARM PL180 MMCI controller	Supported		PL18X
MMC1	ARM PL180 MMCI controller	Supported		PL18X
Framebuffer	ARM PL110 LCD controller	Supported		PL110
Keyboard	ARM PL050 PS/2 keyboard	Supported		PL050
Mouse	ARM PL050 PS/2 mouse	Supported		PL050
Audio	ARM PL041 Audio codec	Planned
LAN	SMC LAN91C11 network	Supported		SMC91X
USB	OHCI host controller	Planned
PCI	PCI controller	Planned
SCSI	SCSI controller	Planned

USB devices

Model	Type	Status	Notes	Unit
Hub	USB Hub	Supported		USB
Storage	USB Storage	Supported		Storage
HID	USB HID	Supported		HID / USBHID
Mouse	USB Mouse	Supported	Full HID support	Mouse / HIDMouse
Keyboard	USB Keyboard	Supported	Full HID support	Keyboard / HIDKeyboard
Gamepad	USB Gamepad	Supported	Full HID support	Joystick / HIDJoystick
Joystick	USB Joystick	Supported	Full HID support	Joystick / HIDJoystick
Touchscreen	USB Touchscreen	Supported	Full HID support	Touch / HIDTouch
Audio	USB Audio	Planned
CDCACM	USB CDC Serial	Supported	Supports newer Arduino models such as Mega 2560 R3 plus Micro:bit	USBCDCACM
FTDI Serial	USB to Serial	Supported	Supports a huge number of USB to serial adapters plus many earlier Arduino models	FTDISerial
PL2303	USB to Serial	Supported		PL2303
RT2800	USB Wireless	Planned
RTL8188EU	USB Wireless	Planned
RTL8192CU	USB Wireless	Planned
u-blox 7	GPS receiver	Tested		USBCDCACM

I2C devices

Model	Type	Status	Notes	Unit
DS1307	Real time clock	Supported	Includes 1307/1337/1338/1339/1340/1388/3231	DS1307
MCP23008/MCP23017	I/O expander	Supported		MCP230XX
STMPE	I/O expander	Supported	Includes 610/801/811/1601/1801/2401	STMPE
STMPE	Touch controller	Supported	Includes 610/811	STMPE
PCF8574	I/O expander	Supported		PCF857X
PCF85063	Real time clock	Planned	Includes PCF85063A/PCF85063TP	PCF85063
FT5x06	Touch controller	Supported	Includes FT5206/FT5306/FT5406/FT5506/FT6236	FT5x06Touch
GT9xx	Touch controller	Supported	Includes GT911/GT912/GT927/GT928/GT967/GT1151...	GoodixTouch

SPI devices

Model	Type	Status	Notes	Unit
ILI9340	TFT display	Supported		ILI9340
HX8357D	TFT display	Supported		HX8357D
PCD8544	LCD controller	Tested	Example provided by Ronald Daleske
STMPE	I/O expander	Supported	Includes 610/801/811/1601/1801/2401	STMPE
STMPE	Touch controller	Supported	Includes 610/811	STMPE
dsPIC	Microcontroller	Tested	Tested by Jim Kueneman

Other devices

Model	Type	Status	Notes	Unit
HD44780	LCD controller	Supported	Use with GPIO or I/O expander	HD44780
RPiFT5406	Touch controller	Supported		RPIFT5406

Add-on boards

Model	Type	Status	Notes	Unit
Adafuit PiTFT28	TFT display	Supported	Uses ILI9340 / STMPE / FT5x06	PiTFT28
Adafuit PiTFT35	TFT display	Supported	Uses HX8357D / STMPE	PiTFT35
Adafruit 16x2 LCD	LCD display	Supported	Uses HD44780 / MCP23008	AF16x2LCD
Generic I2C LCD	LCD display	Supported	Uses HD44780 / PCF8574	I2CLCD
Pimoroni HyperPixel	TFT display	Supported	Square, Round and Rectangular displays supported including touch.	HyperPixel

Accessories

Model	Type	Status	Notes	Unit
Raspberry Pi Camera Module v1 & v2	Add-on board	Supported
Raspberry Pi Camera Module v1 & v2 (NoIR)	Add-on board	Supported
Raspberry Pi Sense HAT	Add-on board	In progress	LED matrix and joystick supported, Sensors in progress	RPISENSEHAT
Raspberry Pi 7″ Touchscreen Display	Touchscreen	Supported	Uses framebuffer driver from BCM2708/9/10	RPIFT5406

Legend

Status	Meaning
Supported	Implemented and fully tested.
In progress	Support for this device is in progress.
Planned	Support for this device is planned for a future release.
Not planned	There are no current plans to support this device.
Tested	Confirmed to work with existing drivers.

Difference between revisions of "Supported Hardware"

Latest revision as of 00:02, 29 November 2022

Contents

Single board computers

Raspberry Pi A/B/A+/B+/Zero/ZeroW/CM1

Raspberry Pi 2B/3B/CM3/3B+/3A+/CM3+/Zero2W

Raspberry Pi 4B/400/CM4

QEMU Versatile PB

USB devices

I2C devices

SPI devices

Other devices

Add-on boards

Accessories

Legend

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 36: / Line 36: @@
 | SDHOST
 | eMMC/SD host controller
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: green; color: #ffffff;"|Supported
 | Secondary eMMC/SD controller
-|
+| [[Unit_BCMSDHOST|BCMSDHOST]]
 |-
@@ Line 101: / Line 101: @@
 | style="background-color: green; color: #ffffff;"|Supported
 |
+| [[Unit_BCM2708|BCM2708]]
+|-
+| BSC2
+| I2C controller
+| style="background-color: green; color: #ffffff;"|Supported
+| Dedicated to the HDMI interface
 | [[Unit_BCM2708|BCM2708]]
@@ Line 134: / Line 141: @@
 | SPI Slave
 | SPI slave device
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: red; color: #ffffff;"|Not planned
-|
+| Device is faulty
 |
@@ Line 141: / Line 148: @@
 | BSC Slave
 | I2C slave device
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: green; color: #ffffff;"|Supported
-|
 |
+| [[Unit_BCM2708|BCM2708]]
 |-
@@ Line 183: / Line 190: @@
 | WiFi
 | BCM43438 WiFi controller
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: magenta; color: #ffffff;"|In progress
 | ZeroW only
 |
@@ Line 308: / Line 315: @@
 |}
-==== Raspberry Pi 2B/3B/CM3/3B+/3A+ ====
+==== Raspberry Pi 2B/3B/CM3/3B+/3A+/CM3+/Zero2W ====
 {| class="wikitable"
@@ Line 341: / Line 348: @@
 | SDHOST
 | eMMC/SD host controller
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: green; color: #ffffff;"|Supported
 | Secondary eMMC/SD controller
-|
+| [[Unit_BCMSDHOST|BCMSDHOST]]
 |-
@@ Line 427: / Line 434: @@
 | style="background-color: green; color: #ffffff;"|Supported
 |
+| [[Unit_BCM2709|BCM2709]] / [[Unit_BCM2710|BCM2710]]
+|-
+| BSC2
+| I2C controller
+| style="background-color: green; color: #ffffff;"|Supported
+| Dedicated to the HDMI interface
 | [[Unit_BCM2709|BCM2709]] / [[Unit_BCM2710|BCM2710]]
@@ Line 460: / Line 474: @@
 | SPI Slave
 | SPI slave device
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: red; color: #ffffff;"|Not planned
-|
+| Device is faulty
 |
@@ Line 467: / Line 481: @@
 | BSC Slave
 | I2C slave device
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: green; color: #ffffff;"|Supported
-|
 |
+| [[Unit_BCM2709|BCM2709]] / [[Unit_BCM2710|BCM2710]]
 |-
@@ Line 509: / Line 523: @@
 | WiFi
 | BCM43438 WiFi controller
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: magenta; color: #ffffff;"|In progress
-| 3B/CM3/3B+/3A+ only
+| 3B/3B+/3A+/Zero2W only
 |
@@ Line 517: / Line 531: @@
 | BCM43438 Bluetooth host
 | style="background-color: orange; color: #ffffff;"|Planned
-| 3B/CM3/3B+/3A+ only
+| 3B/3B+/3A+/Zero2W only
 |
@@ Line 573: / Line 587: @@
 | Virtual GPIO
 | style="background-color: green; color: #ffffff;"|Supported
-| 3B/CM3/3B+/3A+ only
+| 3B/CM3/3B+/3A+/CM3+ only
 | [[Unit_Platform|Platform]]
@@ Line 580: / Line 594: @@
 | GPIO Expander
 | style="background-color: green; color: #ffffff;"|Supported
-| 3B/CM3/3B+/3A+ only
+| 3B/CM3/3B+/3A+/CM3+ only
-| [[Unit_Platform|Platform]] / [[Unit_RPIGPIOEXPANDER|RPIGPIOEXPANDER]]
+| [[Unit_Platform|Platform]] / [[Unit_RPIGPIOEXPANDER|RPiGPIOExpander]]
 |-
@@ Line 688: / Line 702: @@
 | MMC1
 | eMMC/SD host controller
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: green; color: #ffffff;"|Supported
 |
-|
+| [[Unit_BCMSDHOST|BCMSDHOST]]
 |-
@@ Line 698: / Line 712: @@
 |
 | [[Unit_BCM2711|BCM2711]]
+|-
+| USB
+| DWCOTG host controller
+| style="background-color: green; color: #ffffff;"|Supported
+| Available on USB-C port only
+| [[Unit_DWCOTG|DWCOTG]]
 |-
 | USB
 | XHCI host controller
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: magenta; color: #ffffff;"|In progress
 |
 | [[Unit_XHCI|XHCI]]
@@ Line 709: / Line 730: @@
 | PCIe
 | PCIe host controller
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: magenta; color: #ffffff;"|In progress
 |
 | [[Unit_BRCMSTBPCIE|BRCMSTBPCIE]]
@@ Line 830: / Line 851: @@
 | style="background-color: green; color: #ffffff;"|Supported
 |
+| [[Unit_BCM2711|BCM2711]]
+|-
+| I2C2
+| I2C controller
+| style="background-color: green; color: #ffffff;"|Supported
+| Dedicated to the HDMI interface
 | [[Unit_BCM2711|BCM2711]]
@@ Line 858: / Line 886: @@
 | style="background-color: green; color: #ffffff;"|Supported
 |
+| [[Unit_BCM2711|BCM2711]]
+|-
+| I2C7
+| I2C controller
+| style="background-color: green; color: #ffffff;"|Supported
+| Dedicated to the HDMI interface
 | [[Unit_BCM2711|BCM2711]]
@@ Line 926: / Line 961: @@
 | I2C Slave
 | I2C slave device
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: green; color: #ffffff;"|Supported
-|
 |
+| [[Unit_BCM2711|BCM2711]]
 |-
@@ Line 950: / Line 985: @@
 |
 |
+|-
+| RTC
+| Real time clock
+| style="background-color: orange; color: #ffffff;"|Planned
+| Included on CM4 IO board
+| [[Unit_PCF85063|PCF85063]]
 |-
@@ Line 975: / Line 1,017: @@
 | WiFi
 | BCM43438 WiFi controller
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: magenta; color: #ffffff;"|In progress
 |
 |
@@ Line 1,040: / Line 1,082: @@
 | style="background-color: green; color: #ffffff;"|Supported
 |
-| [[Unit_Platform|Platform]] / [[Unit_RPIGPIOEXPANDER|RPIGPIOEXPANDER]]
+| [[Unit_Platform|Platform]] / [[Unit_RPIGPIOEXPANDER|RPiGPIOExpander]]
 |-
@@ Line 1,309: / Line 1,351: @@
 |
 | [[Unit_Storage|Storage]]
+|-
+| HID
+| USB HID
+| style="background-color: green; color: #ffffff;"|Supported
+|
+| [[Unit_HID|HID]] / [[Unit_USBHID|USBHID]]
 |-
@@ Line 1,314: / Line 1,363: @@
 | USB Mouse
 | style="background-color: green; color: #ffffff;"|Supported
-| Boot mode only
+| Full HID support
-| [[Unit_Mouse|Mouse]]
+| [[Unit_Mouse|Mouse]] / [[Unit_HIDMOUSE|HIDMouse]]
 |-
@@ Line 1,321: / Line 1,370: @@
 | USB Keyboard
 | style="background-color: green; color: #ffffff;"|Supported
-| Boot mode only
+| Full HID support
-| [[Unit_Keyboard|Keyboard]]
+| [[Unit_Keyboard|Keyboard]] / [[Unit_HIDKEYBOARD|HIDKeyboard]]
 |-
 | Gamepad
 | USB Gamepad
-| style="background-color: orange; color: #ffffff;"|Planned
+| style="background-color: green; color: #ffffff;"|Supported
-|
+| Full HID support
-|
+| [[Unit_Joystick|Joystick]] / [[Unit_HIDJOYSTICK|HIDJoystick]]
 |-
 | Joystick
 | USB Joystick
+| style="background-color: green; color: #ffffff;"|Supported
+| Full HID support
+| [[Unit_Joystick|Joystick]] / [[Unit_HIDJOYSTICK|HIDJoystick]]
+|-
+| Touchscreen
+| USB Touchscreen
+| style="background-color: green; color: #ffffff;"|Supported
+| Full HID support
+| [[Unit_Touch|Touch]] / [[Unit_HIDTOUCH|HIDTouch]]
+|-
+| Audio
+| USB Audio
 | style="background-color: orange; color: #ffffff;"|Planned
 |
@@ Line 1,440: / Line 1,503: @@
 | Includes PCF85063A/PCF85063TP
 | [[Unit_PCF85063|PCF85063]]
+|-
+| FT5x06
+| Touch controller
+| style="background-color: green; color: #ffffff;"|Supported
+| Includes FT5206/FT5306/FT5406/FT5506/FT6236
+| [[Unit_FT5x06Touch|FT5x06Touch]]
+|-
+| GT9xx
+| Touch controller
+| style="background-color: green; color: #ffffff;"|Supported
+| Includes GT911/GT912/GT927/GT928/GT967/GT1151...
+| [[Unit_GoodixTouch|GoodixTouch]]
 |}
@@ Line 1,537: / Line 1,614: @@
 | TFT display
 | style="background-color: green; color: #ffffff;"|Supported
-| Uses ILI9340 / STMPE
+| Uses ILI9340 / STMPE / FT5x06
 | [[Unit_PiTFT28|PiTFT28]]
@@ Line 1,560: / Line 1,637: @@
 | Uses HD44780 / PCF8574
 | [[Unit_I2CLCD|I2CLCD]]
+|-
+| Pimoroni HyperPixel
+| TFT display
+| style="background-color: green; color: #ffffff;"|Supported
+| Square, Round and Rectangular displays supported including touch.
+| [[Unit_HyperPixel|HyperPixel]]
 |}