Difference between revisions of "Unit GlobalConst"
From Ultibo.org
Jump to: navigation, search
| Line 2,789: | Line 2,789: | ||
| <code>BOARD_TYPE_ODROID_C? = 17;</code> | | <code>BOARD_TYPE_ODROID_C? = 17;</code> | ||
| Odroid C1/C1+ | | Odroid C1/C1+ | ||
| + | |- | ||
| + | | <code>BOARD_TYPE_ODROID_U2 = 18;</code> | ||
| + | | Odroid U2 | ||
| + | |- | ||
| + | | <code>BOARD_TYPE_ODROID_U3 = 19;</code> | ||
| + | | Odroid U3 | ||
| + | |- | ||
| + | | <code>BOARD_TYPE_ODROID_XU3 = 20;</code> | ||
| + | | Odroid XU3 | ||
| + | |- | ||
| + | | <code>BOARD_TYPE_ODROID_XU4 = 21;</code> | ||
| + | | Odroid XU4 | ||
| + | |- | ||
| + | | <code>BOARD_TYPE_PC_X86 = 22;</code> | ||
| + | | PC x86 | ||
| + | |- | ||
| + | | <code>BOARD_TYPE_PC_X86_64 = 23;</code> | ||
| + | | PC x86 64bit | ||
| + | |- | ||
| + | | <code>BOARD_TYPE_RPI3B = 24;</code> | ||
| + | | Raspberry Pi 3 Model B | ||
|- | |- | ||
|} | |} | ||
Revision as of 03:44, 26 September 2016
Return to Unit Reference
Contents
[hide]Description
To be documented
Constants
[Expand]
Universal error constants
ERROR_* ERROR_SUCCESS = 0;
|
Success |
NO_ERROR = 0;
|
Success |
ERROR_INVALID_FUNCTION = 1;
|
Invalid function |
ERROR_FILE_NOT_FOUND = 2;
|
The file cannot be found |
ERROR_PATH_NOT_FOUND = 3;
|
The path cannot be found |
ERROR_TOO_MANY_OPEN_FILES = 4;
|
Too many open files |
ERROR_ACCESS_DENIED = 5;
|
Access is denied |
ERROR_INVALID_HANDLE = 6;
|
Invalid handle} |
ERROR_NOT_ENOUGH_MEMORY = DWORD(8);
|
Not enough storage is available to process this command |
ERROR_INVALID_ACCESS = 12;
|
Invalid access |
ERROR_INVALID_DATA = 13;
|
The data is invalid |
ERROR_OUTOFMEMORY = 14;
|
Not enough memory is available |
ERROR_INVALID_DRIVE = 15;
|
Cannot find the drive specified |
ERROR_CURRENT_DIRECTORY = 16;
|
Current directory cannot be removed |
ERROR_NOT_SAME_DEVICE = 17;
|
Cannot move the file to a different disk drive |
ERROR_NO_MORE_FILES = 18;
|
There are no more files |
ERROR_WRITE_PROTECT = 19;
|
Media is write protected |
ERROR_BAD_UNIT = 20;
|
Cannot find the device specified |
ERROR_NOT_READY = 21;
|
The device is not ready |
ERROR_BAD_COMMAND = 22;
|
The device does not recognise the command |
ERROR_WRITE_FAULT = 29;
|
The device cannot be written to |
ERROR_READ_FAULT = 30;
|
The device cannot be read from |
ERROR_GEN_FAILURE = 31;
|
The device has failed |
ERROR_NOT_SUPPORTED = 50;
|
The request is not supported |
ERROR_DEV_NOT_EXIST = 55;
|
The device does not exist |
ERROR_BAD_DEV_TYPE = 66;
|
Invalid device type |
ERROR_ALREADY_ASSIGNED = 85;
|
The device name is already in use |
ERROR_INVALID_PASSWORD = 86;
|
Invalid pasword |
ERROR_INVALID_PARAMETER = 87;
|
Invalid parameter |
ERROR_SEM_IS_SET = 102;
|
The semaphore is in use and cannot be closed |
ERROR_OPEN_FAILED = 110;
|
The file or device could not be opened |
ERROR_CALL_NOT_IMPLEMENTED = 120;
|
The function is not currently implemented |
ERROR_INSUFFICIENT_BUFFER = 122;
|
The buffer passed is too small for the requested data |
ERROR_WAIT_NO_CHILDREN = 128;
|
There are no child processes to wait for |
ERROR_NOT_LOCKED = 158;
|
The entry is not locked |
ERROR_LOCK_FAILED = 167;
|
The lock operation failed |
ERROR_ALREADY_EXISTS = 183;
|
The file or object already exists |
ERROR_ENVVAR_NOT_FOUND = 203;
|
The environment variable could not be found |
ERROR_LOCKED = 212;
|
The entry is already locked |
ERROR_MORE_DATA = 234;
|
More data is available than the provided buffer |
ERROR_WAIT_TIMEOUT = 258;
|
The operation timed out |
ERROR_NO_MORE_ITEMS = 259;
|
No more items available |
ERROR_NOT_OWNER = 288;
|
The current thread is not the owner |
ERROR_OPERATION_ABORTED = DWORD(995);
|
The I/O operation has been aborted because of either a thread exit or an application request |
ERROR_IO_INCOMPLETE = DWORD(996);
|
Overlapped I/O event is not in a signaled state |
ERROR_IO_PENDING = DWORD(997);
|
Overlapped I/O operation is in progress |
ERROR_CAN_NOT_COMPLETE = 1003;
|
Cannot complete the function |
ERROR_NOT_FOUND = 1168;
|
The entry or device was not found |
ERROR_INVALID_ACL = DWORD(1336);
|
The access control list (ACL) structure is invalid |
ERROR_INVALID_SID = DWORD(1337);
|
The security ID structure is invalid |
ERROR_INVALID_SECURITY_DESCR = DWORD(1338);
|
The security descriptor structure is invalid |
ERROR_TIMEOUT = 1460;
|
The operation returned because the timeout expired |
ERROR_FUNCTION_FAILED = 1627;
|
The function call failed |
| Errors below here have no compatibility equivalent | |
ERROR_NOT_VALID = 1000001;
|
The entry or device is not valid |
ERROR_NOT_ASSIGNED = 1000002;
|
The device is not assigned |
ERROR_IN_USE = 1000003;
|
The device is in use |
ERROR_OPERATION_FAILED = 1000004;
|
The operation failed |
ERROR_NOT_OPEN = 1000005;
|
The file or device is not open |
ERROR_ALREADY_OPEN = 1000006;
|
The file or device is already open |
ERROR_WAIT_ABANDONED = 1000007;
|
The operation was abandoned |
ERROR_IN_PROGRESS = 1000008;
|
An operation is already in progress |
ERROR_RUNTIME_ERROR = 1000009;
|
A run time occurred |
ERROR_EXCEPTION = 1000010;
|
An exception occurred |
ERROR_NOT_PROCESSED = 1000011;
|
The entry has not been processed |
ERROR_NOT_COMPLETED = 1000012;
|
The entry or operation has not completed |
ERROR_NOT_COMPATIBLE = 1000013;
|
The entry is not compatible for the operation |
ERROR_CANCELLED = 1000014;
|
The entry or operation has been cancelled |
ERROR_UNKNOWN = $FFFFFFFF;
|
|
[Expand]
Universal value constants
INVALID_* INVALID_HANDLE_VALUE = THandle(-1);
|
DWORD(-1); |
INVALID_FILE_SIZE = DWORD($FFFFFFFF);
|
|
INVALID_SET_FILE_POINTER = DWORD(-1);
|
|
INVALID_FILE_ATTRIBUTES = DWORD(-1);
|
[Expand]
File open/create constants
CREATE_* CREATE_NEW = 1;
|
|
CREATE_ALWAYS = 2;
|
|
OPEN_EXISTING = 3;
|
|
OPEN_ALWAYS = 4;
|
|
TRUNCATE_EXISTING = 5;
|
[Expand]
File creation flag constants
FILE_FLAG_* FILE_FLAG_WRITE_THROUGH = DWORD($80000000);
|
|
FILE_FLAG_OVERLAPPED = $40000000;
|
|
FILE_FLAG_NO_BUFFERING = $20000000;
|
|
FILE_FLAG_RANDOM_ACCESS = $10000000;
|
|
FILE_FLAG_SEQUENTIAL_SCAN = $08000000;
|
|
FILE_FLAG_DELETE_ON_CLOSE = $04000000;
|
|
FILE_FLAG_BACKUP_SEMANTICS = $02000000;
|
|
FILE_FLAG_POSIX_SEMANTICS = $01000000;
|
|
FILE_FLAG_OPEN_REPARSE_POINT = $00200000;
|
|
FILE_FLAG_OPEN_NO_RECALL = $00100000;
|
|
FILE_FLAG_FIRST_PIPE_INSTANCE = $00080000;
|
[Expand]
File attribute constants
FILE_ATTRIBUTE_* FILE_ATTRIBUTE_READONLY = $00000001;
|
|
FILE_ATTRIBUTE_HIDDEN = $00000002;
|
|
FILE_ATTRIBUTE_SYSTEM = $00000004;
|
|
FILE_ATTRIBUTE_DIRECTORY = $00000010;
|
|
FILE_ATTRIBUTE_ARCHIVE = $00000020;
|
|
FILE_ATTRIBUTE_DEVICE = $00000040;
|
|
FILE_ATTRIBUTE_NORMAL = $00000080;
|
|
FILE_ATTRIBUTE_TEMPORARY = $00000100;
|
|
FILE_ATTRIBUTE_SPARSE_FILE = $00000200;
|
|
FILE_ATTRIBUTE_REPARSE_POINT = $00000400;
|
|
FILE_ATTRIBUTE_COMPRESSED = $00000800;
|
|
FILE_ATTRIBUTE_OFFLINE = $00001000;
|
|
FILE_ATTRIBUTE_NOT_CONTENT_INDEXED = $00002000;
|
|
FILE_ATTRIBUTE_ENCRYPTED = $00004000;
|
[Expand]
Filesystem attribute constants
FS_* FS_CASE_SENSITIVE_SEARCH = $00000001;
|
|
FS_CASE_PRESERVED_NAMES = $00000002;
|
|
FS_UNICODE_ON_DISK = $00000004;
|
|
FS_PERSISTENT_ACLS = $00000008;
|
|
FS_FILE_COMPRESSION = $00000010;
|
|
FS_VOLUME_QUOTAS = $00000020;
|
|
FS_SUPPORTS_SPARSE_FILES = $00000040;
|
|
FS_SUPPORTS_REPARSE_POINTS = $00000080;
|
|
FS_SUPPORTS_REMOTE_STORAGE = $00000100;
|
|
FS_VOLUME_IS_COMPRESSED = $00008000;
|
|
FS_SUPPORTS_OBJECT_IDS = $00010000;
|
|
FS_SUPPORTS_ENCRYPTION = $00020000;
|
|
FS_NAMED_STREAMS = $00040000;
|
|
FS_READ_ONLY_VOLUME = $00080000;
|
[Expand]
Wait constants
WAIT_* WAIT_OBJECT_0 = ERROR_SUCCESS + 0;
|
|
WAIT_ABANDONED = $00000080 + 0;
|
STATUS_ABANDONED_WAIT_0 |
WAIT_ABANDONED_0 = $00000080 + 0;
|
STATUS_ABANDONED_WAIT_0 |
WAIT_TIMEOUT = ERROR_WAIT_TIMEOUT;
|
|
WAIT_FAILED = DWORD($FFFFFFFF);
|
|
WAIT_IO_COMPLETION = $000000C0;
|
STATUS_USER_APC |
MAXIMUM_WAIT_OBJECTS = 64;
|
Maximum number of wait objects |
[Expand]
Universal key code constants
KEY_CODE_* | Keyboard key codes are based on the Unicode standard with each key code mapped to the code point for that character (See http://unicode.org or http://unicode-table.com) | |
| Keyboard keymaps map the scan code value to the key code value for the specific keyboard layout and include alternate mappings for Shift and AltGr | |
| Non character codes for keys like Home, End, Arrows, F1..F24, Shift, Caps Lock etc are mapped in the Unicode Private Use Area (E000-F8FF) | |
| These are the values reported in the KeyCode field of the TKeyboardData structure returned by the KeyboardRead function | |
| Control Characters (0000-001F) | |
KEY_CODE_NONE = $0000;
|
0 |
KEY_CODE_BACKSPACE = $0008;
|
8 |
KEY_CODE_TAB = $0009;
|
9 |
KEY_CODE_ENTER = $000D;
|
13 |
KEY_CODE_ESCAPE = $001B;
|
27 |
KEY_CODE_DELETE = $007F;
|
127 |
| Basic Latin Characters (0020-007F) | |
| Punctuation | |
KEY_CODE_SPACE = $0020;
|
32 |
KEY_CODE_EXCLAMATION = $0021;
|
33 |
KEY_CODE_QUOTATION = $0022;
|
34 |
KEY_CODE_NUMBER = $0023;
|
35 (Hash / Pound) |
KEY_CODE_DOLLAR = $0024;
|
36 |
KEY_CODE_PERCENT = $0025;
|
37 |
KEY_CODE_AMPERSAND = $0026;
|
38 |
KEY_CODE_APOSTROPHE = $0027;
|
39 |
KEY_CODE_LEFT_BRACKET = $0028;
|
40 |
KEY_CODE_RIGHT_BRACKET = $0029;
|
41 |
KEY_CODE_ASTERISK = $002A;
|
42 |
KEY_CODE_PLUS = $002B;
|
43 |
KEY_CODE_COMMA = $002C;
|
44 |
KEY_CODE_MINUS = $002D;
|
45 |
KEY_CODE_PERIOD = $002E;
|
46 |
KEY_CODE_SLASH = $002F;
|
47 |
| Numerals | |
KEY_CODE_0 = $0030;
|
48 |
KEY_CODE_1 = $0031;
|
49 |
KEY_CODE_2 = $0032;
|
50 |
KEY_CODE_3 = $0033;
|
51 |
KEY_CODE_4 = $0034;
|
52 |
KEY_CODE_5 = $0035;
|
53 |
KEY_CODE_6 = $0036;
|
54 |
KEY_CODE_7 = $0037;
|
55 |
KEY_CODE_8 = $0038;
|
56 |
KEY_CODE_9 = $0039;
|
57 |
| Punctuation | |
KEY_CODE_COLON = $003A;
|
58 |
KEY_CODE_SEMICOLON = $003B;
|
59 |
KEY_CODE_LESSTHAN = $003C;
|
60 |
KEY_CODE_EQUALS = $003D;
|
61 |
KEY_CODE_GREATERTHAN = $003E;
|
62 |
KEY_CODE_QUESTION = $003F;
|
63 |
KEY_CODE_AT = $0040;
|
64 |
| Capital Characters | |
KEY_CODE_CAPITAL_A = $0041;
|
65 |
KEY_CODE_CAPITAL_B = $0042;
|
66 |
KEY_CODE_CAPITAL_C = $0043;
|
67 |
KEY_CODE_CAPITAL_D = $0044;
|
68 |
KEY_CODE_CAPITAL_E = $0045;
|
69 |
KEY_CODE_CAPITAL_F = $0046;
|
70 |
KEY_CODE_CAPITAL_G = $0047;
|
71 |
KEY_CODE_CAPITAL_H = $0048;
|
72 |
KEY_CODE_CAPITAL_I = $0049;
|
73 |
KEY_CODE_CAPITAL_J = $004A;
|
74 |
KEY_CODE_CAPITAL_K = $004B;
|
75 |
KEY_CODE_CAPITAL_L = $004C;
|
76 |
KEY_CODE_CAPITAL_M = $004D;
|
77 |
KEY_CODE_CAPITAL_N = $004E;
|
78 |
KEY_CODE_CAPITAL_O = $004F;
|
79 |
KEY_CODE_CAPITAL_P = $0050;
|
80 |
KEY_CODE_CAPITAL_Q = $0051;
|
81 |
KEY_CODE_CAPITAL_R= $0052;
|
82 |
KEY_CODE_CAPITAL_S = $0053;
|
83 |
KEY_CODE_CAPITAL_T = $0054;
|
84 |
KEY_CODE_CAPITAL_U = $0055;
|
85 |
KEY_CODE_CAPITAL_V = $0056;
|
86 |
KEY_CODE_CAPITAL_W = $0057;
|
87 |
KEY_CODE_CAPITAL_X = $0058;
|
88 |
KEY_CODE_CAPITAL_Y = $0059;
|
89 |
KEY_CODE_CAPITAL_Z = $005A;
|
90 |
| Punctuation | |
KEY_CODE_LEFT_SQUARE = $005B;
|
91 |
KEY_CODE_BACKSLASH = $005C;
|
92 |
KEY_CODE_RIGHT_SQUARE = $005D;
|
93 |
KEY_CODE_CARET = $005E;
|
94 (Circumflex) |
KEY_CODE_UNDERSCORE = $005F;
|
95 |
KEY_CODE_GRAVE = $0060;
|
96 |
| Lowercase Characters | |
KEY_CODE_A = $0061;
|
97 |
KEY_CODE_B = $0062;
|
98 |
KEY_CODE_C = $0063;
|
99 |
KEY_CODE_D = $0064;
|
100 |
KEY_CODE_E = $0065;
|
101 |
KEY_CODE_F = $0066;
|
102 |
KEY_CODE_G = $0067;
|
103 |
KEY_CODE_H = $0068;
|
104 |
KEY_CODE_I = $0069;
|
105 |
KEY_CODE_J = $006A;
|
106 |
KEY_CODE_K = $006B;
|
107 |
KEY_CODE_L = $006C;
|
108 |
KEY_CODE_M = $006D;
|
109 |
KEY_CODE_N = $006E;
|
110 |
KEY_CODE_O = $006F;
|
111 |
KEY_CODE_P = $0070;
|
112 |
KEY_CODE_Q = $0071;
|
113 |
KEY_CODE_R = $0072;
|
114 |
KEY_CODE_S = $0073;
|
115 |
KEY_CODE_T = $0074;
|
116 |
KEY_CODE_U = $0075;
|
117 |
KEY_CODE_V = $0076;
|
118 |
KEY_CODE_W = $0077;
|
119 |
KEY_CODE_X = $0078;
|
120 |
KEY_CODE_Y = $0079;
|
121 |
KEY_CODE_Z = $007A;
|
122 |
| Punctuation | |
KEY_CODE_LEFT_BRACE = $007B;
|
123 (Curly Bracket) |
KEY_CODE_PIPE = $007C;
|
124 (Vertical Bar) |
KEY_CODE_RIGHT_BRACE = $007D;
|
125 (Curly Bracket) |
KEY_CODE_TILDE = $007E;
|
126 |
KEY_CODE_DELETE
|
(See above) |
| Latin-1 Supplement Characters (0080-00FF) | |
KEY_CODE_INVERTED_EXCLAMATION = $00A1;
|
|
KEY_CODE_CENT = $00A2;
|
|
KEY_CODE_POUND = $00A3;
|
|
KEY_CODE_CURRENCY = $00A4;
|
|
KEY_CODE_YEN = $00A5;
|
|
KEY_CODE_BROKEN_BAR = $00A6;
|
|
KEY_CODE_SECTION = $00A7;
|
|
KEY_CODE_DIAERESIS = $00A8;
|
|
KEY_CODE_COPYRIGHT = $00A9;
|
|
KEY_CODE_FEMININE = $00AA;
|
|
KEY_CODE_LEFT_DOUBLE_ANGLE = $00AB;
|
|
KEY_CODE_NOT = $00AC;
|
|
KEY_CODE_REGISTERED = $00AE;
|
|
KEY_CODE_MACRON = $00AF;
|
|
KEY_CODE_DEGREE = $00B0;
|
|
KEY_CODE_PLUS_MINUS = $00B1;
|
|
KEY_CODE_SUPERSCRIPT_2 = $00B2;
|
|
KEY_CODE_SUPERSCRIPT_3 = $00B3;
|
|
KEY_CODE_ACUTE = $00B4;
|
|
KEY_CODE_MICRO = $00B5;
|
|
KEY_CODE_PILCROW = $00B6;
|
|
KEY_CODE_MIDDLE_DOT = $00B7;
|
|
KEY_CODE_CEDILLA = $00B8;
|
|
KEY_CODE_SUPERSCRIPT_1 = $00B9;
|
|
KEY_CODE_MASCULINE = $00BA;
|
|
KEY_CODE_RIGHT_DOUBLE_ANGLE = $00BB;
|
|
KEY_CODE_ONE_QUARTER = $00BC;
|
|
KEY_CODE_ONE_HALF = $00BD;
|
|
KEY_CODE_THREE_QUARTER = $00BE;
|
|
KEY_CODE_INVERTED_QUESTION = $00BF;
|
|
KEY_CODE_CAPITAL_GRAVE_A = $00C0;
|
|
KEY_CODE_CAPITAL_ACUTE_A = $00C1;
|
|
KEY_CODE_CAPITAL_CIRCUMFLEX_A = $00C2;
|
|
KEY_CODE_CAPITAL_TILDE_A = $00C3;
|
|
KEY_CODE_CAPITAL_DIAERESIS_A = $00C4;
|
|
KEY_CODE_CAPITAL_RING_A = $00C5;
|
|
KEY_CODE_CAPITAL_AE = $00C6;
|
|
KEY_CODE_CAPITAL_CEDILLA_C = $00C7;
|
|
KEY_CODE_CAPITAL_GRAVE_E = $00C8;
|
|
KEY_CODE_CAPITAL_ACUTE_E = $00C9;
|
|
KEY_CODE_CAPITAL_CIRCUMFLEX_E = $00CA;
|
|
KEY_CODE_CAPITAL_DIAERESIS_E = $00CB;
|
|
KEY_CODE_CAPITAL_GRAVE_I = $00CC;
|
|
KEY_CODE_CAPITAL_ACUTE_I = $00CD;
|
|
KEY_CODE_CAPITAL_CIRCUMFLEX_I = $00CE;
|
|
KEY_CODE_CAPITAL_DIAERESIS_I = $00CF;
|
|
KEY_CODE_CAPITAL_ETH = $00D0;
|
|
KEY_CODE_CAPITAL_TILDE_N = $00D1;
|
|
KEY_CODE_CAPITAL_GRAVE_O = $00D2;
|
|
KEY_CODE_CAPITAL_ACUTE_O = $00D3;
|
|
KEY_CODE_CAPITAL_CIRCUMFLEX_O = $00D4;
|
|
KEY_CODE_CAPITAL_TILDE_O = $00D5;
|
|
KEY_CODE_CAPITAL_DIAERESIS_O = $00D6;
|
|
KEY_CODE_MULTIPLY = $00D7;
|
|
KEY_CODE_CAPITAL_STROKE_O = $00D8;
|
|
KEY_CODE_CAPITAL_GRAVE_U = $00D9;
|
|
KEY_CODE_CAPITAL_ACUTE_U = $00DA;
|
|
KEY_CODE_CAPITAL_CIRCUMFLEX_U = $00DB;
|
|
KEY_CODE_CAPITAL_DIAERESIS_U = $00DC;
|
|
KEY_CODE_CAPITAL_ACUTE_Y = $00DD;
|
|
KEY_CODE_CAPITAL_THORN = $00DE;
|
|
KEY_CODE_SHARP_S = $00DF;
|
|
KEY_CODE_GRAVE_A = $00E0;
|
|
KEY_CODE_ACUTE_A = $00E1;
|
|
KEY_CODE_CIRCUMFLEX_A = $00E2;
|
|
KEY_CODE_TILDE_A = $00E3;
|
|
KEY_CODE_DIAERESIS_A = $00E4;
|
|
KEY_CODE_RING_A = $00E5;
|
|
KEY_CODE_AE = $00E6;
|
|
KEY_CODE_CEDILLA_C = $00E7;
|
|
KEY_CODE_GRAVE_E = $00E8;
|
|
KEY_CODE_ACUTE_E = $00E9;
|
|
KEY_CODE_CIRCUMFLEX_E = $00EA;
|
|
KEY_CODE_DIAERESIS_E = $00EB;
|
|
KEY_CODE_GRAVE_I = $00EC;
|
|
KEY_CODE_ACUTE_I = $00ED;
|
|
KEY_CODE_CIRCUMFLEX_I = $00EE;
|
|
KEY_CODE_DIAERESIS_I = $00EF;
|
|
KEY_CODE_ETH = $00F0;
|
|
KEY_CODE_TILDE_N = $00F1;
|
|
KEY_CODE_GRAVE_O = $00F2;
|
|
KEY_CODE_ACUTE_O = $00F3;
|
|
KEY_CODE_CIRCUMFLEX_O = $00F4;
|
|
KEY_CODE_TILDE_O = $00F5;
|
|
KEY_CODE_DIAERESIS_O = $00F6;
|
|
KEY_CODE_DIVISION = $00F7;
|
|
KEY_CODE_STROKE_O = $00F8;
|
|
KEY_CODE_GRAVE_U = $00F9;
|
|
KEY_CODE_ACUTE_U = $00FA;
|
|
KEY_CODE_CIRCUMFLEX_U = $00FB;
|
|
KEY_CODE_DIAERESIS_U = $00FC;
|
|
KEY_CODE_ACUTE_Y = $00FD;
|
|
KEY_CODE_THORN = $00FE;
|
|
KEY_CODE_DIAERESIS_Y = $00FF;
|
|
| General Punctuation (2000-206F) | |
KEY_CODE_LEFT_QUOTE = $2018;
|
|
KEY_CODE_RIGHT_QUOTE = $2019;
|
|
| Currency Symbols (20A0-20CF) | |
KEY_CODE_EURO = $20AC;
|
|
| Private Area (E000-F8FF) | |
| Non Character Codes | |
KEY_CODE_CAPSLOCK = $E000;
|
|
KEY_CODE_F1 = $E001;
|
|
KEY_CODE_F2 = $E002;
|
|
KEY_CODE_F3 = $E003;
|
|
KEY_CODE_F4 = $E004;
|
|
KEY_CODE_F5 = $E005;
|
|
KEY_CODE_F6 = $E006;
|
|
KEY_CODE_F7 = $E007;
|
|
KEY_CODE_F8 = $E008;
|
|
KEY_CODE_F9 = $E009;
|
|
KEY_CODE_F10 = $E00A;
|
|
KEY_CODE_F11 = $E00B;
|
|
KEY_CODE_F12 = $E00C;
|
|
KEY_CODE_PRINTSCREEN = $E00D;
|
|
KEY_CODE_SCROLLLOCK = $E00E;
|
|
KEY_CODE_PAUSE = $E00F;
|
|
KEY_CODE_INSERT = $E010;
|
|
KEY_CODE_HOME = $E011;
|
|
KEY_CODE_PAGEUP = $E012;
|
|
KEY_CODE_END = $E013;
|
|
KEY_CODE_PAGEDN = $E014;
|
|
KEY_CODE_RIGHT_ARROW = $E015;
|
|
KEY_CODE_LEFT_ARROW = $E016;
|
|
KEY_CODE_DOWN_ARROW = $E017;
|
|
KEY_CODE_UP_ARROW = $E018;
|
|
KEY_CODE_NUMLOCK = $E019;
|
|
KEY_CODE_APPLICATION = $E01A;
|
|
KEY_CODE_POWER = $E01B;
|
|
KEY_CODE_F13 = $E01C;
|
|
KEY_CODE_F14 = $E01D;
|
|
KEY_CODE_F15 = $E01E;
|
|
KEY_CODE_F16 = $E01F;
|
|
KEY_CODE_F17 = $E020;
|
|
KEY_CODE_F18 = $E021;
|
|
KEY_CODE_F19 = $E022;
|
|
KEY_CODE_F20 = $E023;
|
|
KEY_CODE_F21 = $E024;
|
|
KEY_CODE_F22 = $E025;
|
|
KEY_CODE_F23 = $E026;
|
|
KEY_CODE_F24 = $E027;
|
|
KEY_CODE_EXECUTE = $E028;
|
|
KEY_CODE_HELP = $E029;
|
|
KEY_CODE_MENU = $E02A;
|
|
KEY_CODE_SELECT = $E02B;
|
|
KEY_CODE_STOP = $E02C;
|
|
KEY_CODE_AGAIN = $E02D;
|
|
KEY_CODE_UNDO = $E02E;
|
|
KEY_CODE_CUT = $E02F;
|
|
KEY_CODE_COPY = $E030;
|
|
KEY_CODE_PASTE = $E031;
|
|
KEY_CODE_FIND = $E032;
|
|
KEY_CODE_MUTE = $E033;
|
|
KEY_CODE_VOLUMEUP = $E034;
|
|
KEY_CODE_VOLUMEDOWN = $E035;
|
|
KEY_CODE_LOCKING_CAPSLOCK = $E036;
|
|
KEY_CODE_LOCKING_NUMLOCK = $E037;
|
|
KEY_CODE_LOCKING_SCROLLLOCK = $E038;
|
|
KEY_CODE_INTERNATIONAL1 = $E039;
|
|
KEY_CODE_INTERNATIONAL2 = $E03A;
|
|
KEY_CODE_INTERNATIONAL3 = $E03B;
|
|
KEY_CODE_INTERNATIONAL4 = $E03C;
|
|
KEY_CODE_INTERNATIONAL5 = $E03D;
|
|
KEY_CODE_INTERNATIONAL6 = $E03E;
|
|
KEY_CODE_INTERNATIONAL7 = $E03F;
|
|
KEY_CODE_INTERNATIONAL8 = $E040;
|
|
KEY_CODE_INTERNATIONAL9 = $E041;
|
|
KEY_CODE_LANG1 = $E042;
|
|
KEY_CODE_LANG2 = $E043;
|
|
KEY_CODE_LANG3 = $E044;
|
|
KEY_CODE_LANG4 = $E045;
|
|
KEY_CODE_LANG5 = $E046;
|
|
KEY_CODE_LANG6 = $E047;
|
|
KEY_CODE_LANG7 = $E048;
|
|
KEY_CODE_LANG8 = $E049;
|
|
KEY_CODE_LANG9 = $E04A;
|
|
KEY_CODE_ALT_ERASE = $E04B;
|
|
KEY_CODE_SYSREQ = $E04C;
|
|
KEY_CODE_CANCEL = $E04D;
|
|
KEY_CODE_CLEAR = $E04E;
|
|
KEY_CODE_PRIOR = $E04F;
|
|
KEY_CODE_RETURN = $E050;
|
|
KEY_CODE_SEPARATOR = $E051;
|
|
KEY_CODE_OUT = $E052;
|
|
KEY_CODE_OPER = $E053;
|
|
KEY_CODE_CLEAR_AGAIN = $E054;
|
|
KEY_CODE_CRSEL_PROPS = $E055;
|
|
KEY_CODE_EXSEL = $E056;
|
|
KEY_CODE_00 = $E057;
|
|
KEY_CODE_000 = $E058;
|
|
KEY_CODE_THOUSANDS_SEPARATOR = $E059;
|
|
KEY_CODE_DECIMAL_SEPARATOR = $E05A;
|
|
KEY_CODE_CURRENCY_UNIT = $E05B;
|
|
KEY_CODE_CURRENCY_SUBUNIT = $E05C;
|
|
KEY_CODE_XOR = $E05D;
|
|
KEY_CODE_MEM_STORE = $E05E;
|
|
KEY_CODE_MEM_RECALL = $E05F;
|
|
KEY_CODE_MEM_CLEAR = $E060;
|
|
KEY_CODE_MEM_ADD = $E061;
|
|
KEY_CODE_MEM_SUBTRACT = $E062;
|
|
KEY_CODE_MEM_MULTIPLY = $E063;
|
|
KEY_CODE_MEM_DIVIDE = $E064;
|
|
KEY_CODE_CLEAR_ENTRY = $E065;
|
|
KEY_CODE_BINARY = $E066;
|
|
KEY_CODE_OCTAL = $E067;
|
|
KEY_CODE_DECIMAL = $E068;
|
|
KEY_CODE_HEX = $E069;
|
|
KEY_CODE_CTRL = $E06A;
|
|
KEY_CODE_SHIFT = $E06B;
|
|
KEY_CODE_ALT = $E06C;
|
|
KEY_CODE_GUI = $E06D;
|
|
KEY_CODE_DOUBLE_AMPERSAND = $E06E;
|
|
KEY_CODE_DOUBLE_PIPE = $E06F;
|
|
KEY_CODE_CENTER = $E070;
|
|
KEY_CODE_TRANSLATE_START = $0080;
|
Key codes below this are direct characters in all code pages |
KEY_CODE_PRIVATE_START = $E000;
|
Key codes in this range are private area mappings for non character keys |
KEY_CODE_PRIVATE_END = $F8FF;
|
|
[Expand]
Universal scan code constants
SCAN_CODE_* | Keyboard scan codes are based on the USB HID Usages (See Section 10 of the Universal Serial Bus HID Usage Tables v1.12) | |
| These are the values reported in the ScanCode field of the TKeyboardData structure returned by the KeyboardRead function | |
| Any keyboard driver supporting legacy keyboards (eg PC/AT or PS/2) should translate the reported codes to be compatible with this set | |
SCAN_CODE_NONE = 0;
|
Reserved (no event indicated) |
SCAN_CODE_ROLLOVER = 1;
|
Keyboard ErrorRollOver |
SCAN_CODE_POSTFAIL = 2;
|
Keyboard POSTFail |
SCAN_CODE_ERROR = 3;
|
Keyboard ErrorUndefined |
SCAN_CODE_A = 4;
|
Keyboard a or A |
SCAN_CODE_B = 5;
|
Keyboard b or B |
SCAN_CODE_C = 6;
|
Keyboard c or C |
SCAN_CODE_D = 7;
|
Keyboard d or D |
SCAN_CODE_E = 8;
|
Keyboard e or E |
SCAN_CODE_F = 9;
|
Keyboard f or F |
SCAN_CODE_G = 10;
|
Keyboard g or G |
SCAN_CODE_H = 11;
|
Keyboard h or H |
SCAN_CODE_I = 12;
|
Keyboard i or I |
SCAN_CODE_J = 13;
|
Keyboard j or J |
SCAN_CODE_K = 14;
|
Keyboard k or K |
SCAN_CODE_L = 15;
|
Keyboard l or L |
SCAN_CODE_M = 16;
|
Keyboard m or M |
SCAN_CODE_N = 17;
|
Keyboard n or N |
SCAN_CODE_O = 18;
|
Keyboard o or O |
SCAN_CODE_P = 19;
|
Keyboard p or P |
SCAN_CODE_Q = 20;
|
Keyboard q or Q |
SCAN_CODE_R = 21;
|
Keyboard r or R |
SCAN_CODE_S = 22;
|
Keyboard s or S |
SCAN_CODE_T = 23;
|
Keyboard t or T |
SCAN_CODE_U = 24;
|
Keyboard u or U |
SCAN_CODE_V = 25;
|
Keyboard v or V |
SCAN_CODE_W = 26;
|
Keyboard w or W |
SCAN_CODE_X = 27;
|
Keyboard x or X |
SCAN_CODE_Y = 28;
|
Keyboard y or Y |
SCAN_CODE_Z = 29;
|
Keyboard z or Z |
SCAN_CODE_1 = 30;
|
Keyboard 1 or ! |
SCAN_CODE_2 = 31;
|
Keyboard 2 or @ |
SCAN_CODE_3 = 32;
|
Keyboard 3 or # |
SCAN_CODE_4 = 33;
|
Keyboard 4 or $ |
SCAN_CODE_5 = 34;
|
Keyboard 5 or % |
SCAN_CODE_6 = 35;
|
Keyboard 6 or ^ |
SCAN_CODE_7 = 36;
|
Keyboard 7 or & |
SCAN_CODE_8 = 37;
|
Keyboard 8 or * |
SCAN_CODE_9 = 38;
|
Keyboard 9 or ( |
SCAN_CODE_0 = 39;
|
Keyboard 0 or ) |
SCAN_CODE_ENTER = 40;
|
Keyboard Enter |
SCAN_CODE_ESCAPE = 41;
|
Keyboard Escape |
SCAN_CODE_BACKSPACE = 42;
|
Keyboard Backspace |
SCAN_CODE_TAB = 43;
|
Keyboard Tab |
SCAN_CODE_SPACE = 44;
|
Keyboard Spacebar |
SCAN_CODE_MINUS = 45;
|
Keyboard - or _ |
SCAN_CODE_EQUALS = 46;
|
Keyboard = or + |
SCAN_CODE_LEFT_SQUARE = 47;
|
Keyboard [ or Left Brace |
SCAN_CODE_RIGHT_SQUARE = 48;
|
Keyboard ] or Right Brace |
SCAN_CODE_BACKSLASH = 49;
|
|
SCAN_CODE_NONUS_NUMBER = 50;
|
Keyboard Non-US # and ~ |
SCAN_CODE_SEMICOLON = 51;
|
Keyboard ; or : |
SCAN_CODE_APOSTROPHE = 52;
|
Keyboard ' or " |
SCAN_CODE_GRAVE = 53;
|
Keyboard ` or ~ |
SCAN_CODE_COMMA = 54;
|
Keyboard , or < |
SCAN_CODE_PERIOD = 55;
|
Keyboard . or > |
SCAN_CODE_SLASH = 56;
|
Keyboard / or ? |
SCAN_CODE_CAPSLOCK = 57;
|
Keyboard Caps Lock |
SCAN_CODE_F1 = 58;
|
Keyboard F1 |
SCAN_CODE_F2 = 59;
|
Keyboard F2 |
SCAN_CODE_F3 = 60;
|
Keyboard F3 |
SCAN_CODE_F4 = 61;
|
Keyboard F4 |
SCAN_CODE_F5 = 62;
|
Keyboard F5 |
SCAN_CODE_F6 = 63;
|
Keyboard F6 |
SCAN_CODE_F7 = 64;
|
Keyboard F7 |
SCAN_CODE_F8 = 65;
|
Keyboard F8 |
SCAN_CODE_F9 = 66;
|
Keyboard F9 |
SCAN_CODE_F10 = 67;
|
Keyboard F10 |
SCAN_CODE_F11 = 68;
|
Keyboard F11 |
SCAN_CODE_F12 = 69;
|
Keyboard F12 |
SCAN_CODE_PRINTSCREEN = 70;
|
Keyboard Print Screen |
SCAN_CODE_SCROLLLOCK = 71;
|
Keyboard Scroll Lock |
SCAN_CODE_PAUSE = 72;
|
Keyboard Pause |
SCAN_CODE_INSERT = 73;
|
Keyboard Insert |
SCAN_CODE_HOME = 74;
|
Keyboard Home |
SCAN_CODE_PAGEUP = 75;
|
Keyboard PageUp |
SCAN_CODE_DELETE = 76;
|
Keyboard Delete |
SCAN_CODE_END = 77;
|
Keyboard End |
SCAN_CODE_PAGEDN = 78;
|
Keyboard PageDn |
SCAN_CODE_RIGHT_ARROW = 79;
|
Keyboard Right Arrow |
SCAN_CODE_LEFT_ARROW = 80;
|
Keyboard Left Arrow |
SCAN_CODE_DOWN_ARROW = 81;
|
Keyboard Down Arrow |
SCAN_CODE_UP_ARROW = 82;
|
Keyboard Up Arrow |
SCAN_CODE_NUMLOCK = 83;
|
Keyboard Num Lock |
SCAN_CODE_KEYPAD_SLASH = 84;
|
Keypad / |
SCAN_CODE_KEYPAD_ASTERISK = 85;
|
Keypad * |
SCAN_CODE_KEYPAD_MINUS = 86;
|
Keypad - |
SCAN_CODE_KEYPAD_PLUS = 87;
|
Keypad + |
SCAN_CODE_KEYPAD_ENTER = 88;
|
Keypad Enter |
SCAN_CODE_KEYPAD_1 = 89;
|
Keypad 1 and End |
SCAN_CODE_KEYPAD_2 = 90;
|
Keypad 2 and Down Arrow |
SCAN_CODE_KEYPAD_3 = 91;
|
Keypad 3 and PageDn |
SCAN_CODE_KEYPAD_4 = 92;
|
Keypad 4 and Left Arrow |
SCAN_CODE_KEYPAD_5 = 93;
|
Keypad 5 and Center |
SCAN_CODE_KEYPAD_6 = 94;
|
Keypad 6 and Right Arrow |
SCAN_CODE_KEYPAD_7 = 95;
|
Keypad 7 and Home |
SCAN_CODE_KEYPAD_8 = 96;
|
Keypad 8 and Up Arrow |
SCAN_CODE_KEYPAD_9 = 97;
|
Keypad 9 and PageUp |
SCAN_CODE_KEYPAD_0 = 98;
|
Keypad 0 and Insert |
SCAN_CODE_KEYPAD_PERIOD = 99;
|
Keypad . and Delete |
SCAN_CODE_NONUS_BACKSLASH = 100;
|
|
SCAN_CODE_APPLICATION = 101;
|
Keyboard Application |
SCAN_CODE_POWER = 102;
|
Keyboard Power |
SCAN_CODE_KEYPAD_EQUALS = 103;
|
Keypad = |
SCAN_CODE_F13 = 104;
|
Keyboard F13 |
SCAN_CODE_F14 = 105;
|
Keyboard F14 |
SCAN_CODE_F15 = 106;
|
Keyboard F15 |
SCAN_CODE_F16 = 107;
|
Keyboard F16 |
SCAN_CODE_F17 = 108;
|
Keyboard F17 |
SCAN_CODE_F18 = 109;
|
Keyboard F18 |
SCAN_CODE_F19 = 110;
|
Keyboard F19 |
SCAN_CODE_F20 = 111;
|
Keyboard F20 |
SCAN_CODE_F2? = 112;
|
Keyboard F21 |
SCAN_CODE_F22 = 113;
|
Keyboard F22 |
SCAN_CODE_F23 = 114;
|
Keyboard F23 |
SCAN_CODE_F24 = 115;
|
Keyboard F24 |
SCAN_CODE_EXECUTE = 116;
|
Keyboard Execute |
SCAN_CODE_HELP = 117;
|
Keyboard Help |
SCAN_CODE_MENU = 118;
|
Keyboard Menu |
SCAN_CODE_SELECT = 119;
|
Keyboard Select |
SCAN_CODE_STOP = 120;
|
Keyboard Stop |
SCAN_CODE_AGAIN = 121;
|
Keyboard Again |
SCAN_CODE_UNDO = 122;
|
Keyboard Undo |
SCAN_CODE_CUT = 123;
|
Keyboard Cut |
SCAN_CODE_COPY = 124;
|
Keyboard Copy |
SCAN_CODE_PASTE = 125;
|
Keyboard Paste |
SCAN_CODE_FIND = 126;
|
Keyboard Find |
SCAN_CODE_MUTE = 127;
|
Keyboard Mute |
SCAN_CODE_VOLUMEUP = 128;
|
Keyboard Volume Up |
SCAN_CODE_VOLUMEDN = 129;
|
Keyboard Volume Down |
SCAN_CODE_LOCKING_CAPSLOCK = 130;
|
Keyboard Locking Caps Lock |
SCAN_CODE_LOCKING_NUMLOCK = 131;
|
Keyboard Locking Num Lock |
SCAN_CODE_LOCKING_SCROLLLOCK = 132;
|
Keyboard Locking Scroll Lock |
SCAN_CODE_KEYPAD_COMMA = 133;
|
Keypad Comma |
SCAN_CODE_KEYPAD_EQUAL_SIGN = 134;
|
Keypad Equal Sign |
SCAN_CODE_INTERNATIONAL? = 135;
|
Keyboard International1 |
SCAN_CODE_INTERNATIONAL2 = 136;
|
Keyboard International2 |
SCAN_CODE_INTERNATIONAL3 = 137;
|
Keyboard International3 |
SCAN_CODE_INTERNATIONAL4 = 138;
|
Keyboard International4 |
SCAN_CODE_INTERNATIONAL5 = 139;
|
Keyboard International5 |
SCAN_CODE_INTERNATIONAL6 = 140;
|
Keyboard International6 |
SCAN_CODE_INTERNATIONAL7 = 141;
|
Keyboard International7 |
SCAN_CODE_INTERNATIONAL8 = 142;
|
Keyboard International8 |
SCAN_CODE_INTERNATIONAL9 = 143;
|
Keyboard International9 |
SCAN_CODE_LANG? = 144;
|
Keyboard LANG1 |
SCAN_CODE_LANG2 = 145;
|
Keyboard LANG2 |
SCAN_CODE_LANG3 = 146;
|
Keyboard LANG3 |
SCAN_CODE_LANG4 = 147;
|
Keyboard LANG4 |
SCAN_CODE_LANG5 = 148;
|
Keyboard LANG5 |
SCAN_CODE_LANG6 = 149;
|
Keyboard LANG6 |
SCAN_CODE_LANG7 = 150;
|
Keyboard LANG7 |
SCAN_CODE_LANG8 = 151;
|
Keyboard LANG8 |
SCAN_CODE_LANG9 = 152;
|
Keyboard LANG9 |
SCAN_CODE_ALT_ERASE = 153;
|
Keyboard Alternate Erase |
SCAN_CODE_SYSREQ = 154;
|
Keyboard SysReq/Attention |
SCAN_CODE_CANCEL = 155;
|
Keyboard Cancel |
SCAN_CODE_CLEAR = 156;
|
Keyboard Clear |
SCAN_CODE_PRIOR = 157;
|
Keyboard Prior |
SCAN_CODE_RETURN = 158;
|
Keyboard Return |
SCAN_CODE_SEPARATOR = 159;
|
Keyboard Separator |
SCAN_CODE_OUT = 160;
|
Keyboard Out |
SCAN_CODE_OPER = 161;
|
Keyboard Oper |
SCAN_CODE_CLEAR_AGAIN = 162;
|
Keyboard Clear/Again |
SCAN_CODE_CRSEL_PROPS = 163;
|
Keyboard CrSel/Props |
SCAN_CODE_EXSEL = 164;
|
Keyboard ExSel |
| Codes 165 to 175 Reserved | |
SCAN_CODE_KEYPAD_00 = 176;
|
Keypad 00 |
SCAN_CODE_KEYPAD_000 = 177;
|
Keypad 000 |
SCAN_CODE_THOUSANDS_SEPARATOR = 178;
|
Thousands Separator |
SCAN_CODE_DECIMAL_SEPARATOR = 179;
|
Decimal Separator |
SCAN_CODE_CURRENCY_UNIT = 180;
|
Currency Unit |
SCAN_CODE_CURRENCY_SUBUNIT = 181;
|
Currenct Sub-unit |
SCAN_CODE_KEYPAD_LEFT_BRACKET = 182;
|
Keypad ( |
SCAN_CODE_KEYPAD_RIGHT_BRACKET = 183;
|
Keypad ) |
SCAN_CODE_KEYPAD_LEFT_BRACE = 184;
|
Keypad Left Brace |
SCAN_CODE_KEYPAD_RIGHT_BRACE = 185;
|
Keypad Right Brace |
SCAN_CODE_KEYPAD_TAB = 186;
|
Keypad Tab |
SCAN_CODE_KEYPAD_BACKSPACE = 187;
|
Keypad Backspace |
SCAN_CODE_KEYPAD_A = 188;
|
Keypad A |
SCAN_CODE_KEYPAD_B = 189;
|
Keypad B |
SCAN_CODE_KEYPAD_C = 190;
|
Keypad C |
SCAN_CODE_KEYPAD_D = 191;
|
Keypad D |
SCAN_CODE_KEYPAD_E = 192;
|
Keypad E |
SCAN_CODE_KEYPAD_F = 193;
|
Keypad F |
SCAN_CODE_KEYPAD_XOR = 194;
|
Keypad XOR |
SCAN_CODE_KEYPAD_CARET = 195;
|
Keypad ^ |
SCAN_CODE_KEYPAD_PERCENT = 196;
|
Keypad % |
SCAN_CODE_KEYPAD_LESSTHAN = 197;
|
Keypad < |
SCAN_CODE_KEYPAD_GREATERTHAN = 198;
|
Keypad > |
SCAN_CODE_KEYPAD_AMPERSAND = 199;
|
Keypad & |
SCAN_CODE_KEYPAD_DOUBLE_AMPERSAND = 200;
|
Keypad && |
SCAN_CODE_KEYPAD_PIPE = 201;
|
Keypad Pipe |
SCAN_CODE_KEYPAD_DOUBLE_PIPE = 202;
|
Keypad Double Pipe |
SCAN_CODE_KEYPAD_NUMBER = 204;
|
Keypad # |
SCAN_CODE_KEYPAD_SPACE = 205;
|
Keypad Space |
SCAN_CODE_KEYPAD_AT = 206;
|
Keypad @ |
SCAN_CODE_KEYPAD_EXCLAMATION = 207;
|
Keypad ! |
SCAN_CODE_KEYPAD_MEM_STORE = 208;
|
Keypad Memory Store |
SCAN_CODE_KEYPAD_MEM_RECALL = 209;
|
Keypad Memory Recall |
SCAN_CODE_KEYPAD_MEM_CLEAR = 210;
|
Keypad Memory Clear |
SCAN_CODE_KEYPAD_MEM_ADD = 211;
|
Keypad Memory Add |
SCAN_CODE_KEYPAD_MEM_SUB = 212;
|
Keypad Memory Subtract |
SCAN_CODE_KEYPAD_MEM_MULTIPLY = 213;
|
Keypad Memory Multiply |
SCAN_CODE_KEYPAD_MEM_DIVIDE = 214;
|
Keypad Memory Divide |
SCAN_CODE_KEYPAD_PLUS_MINUS = 215;
|
Keypad +/- |
SCAN_CODE_KEYPAD_CLEAR = 216;
|
Keypad Clear |
SCAN_CODE_KEYPAD_CLEAR_ENTRY = 217;
|
Keypad Clear Entry |
SCAN_CODE_KEYPAD_BINARY = 218;
|
Keypad Binary |
SCAN_CODE_KEYPAD_OCTAL = 219;
|
Keypad Octal |
SCAN_CODE_KEYPAD_DECIMAL = 220;
|
Keypad Decimal |
SCAN_CODE_KEYPAD_HEX = 221;
|
Keypad Hexadecimal |
| Codes 222 to 223 Reserved | |
SCAN_CODE_LEFT_CTRL = 224;
|
Keyboard LeftControl |
SCAN_CODE_LEFT_SHIFT = 225;
|
Keyboard LeftShift |
SCAN_CODE_LEFT_ALT = 226;
|
Keyboard LeftAlt |
SCAN_CODE_LEFT_GUI = 227;
|
Keyboard Left GUI |
SCAN_CODE_RIGHT_CTRL = 228;
|
Keyboard RightControl |
SCAN_CODE_RIGHT_SHIFT = 229;
|
Keyboard RightShift |
SCAN_CODE_RIGHT_ALT = 230;
|
Keyboard RightAlt |
SCAN_CODE_RIGHT_GUI = 231;
|
Keyboard Right GUI |
| Codes 232 to 65535 Reserved | |
| Alternate names for above | |
SCAN_CODE_EXCLAMATION = 30;}
|
Keyboard 1 or ! |
SCAN_CODE_AT = 31;
|
Keyboard 2 or @ |
SCAN_CODE_NUMBER = 32;
|
Keyboard 3 or # |
SCAN_CODE_CURRENCY = 33;
|
Keyboard 4 or $ |
SCAN_CODE_PERCENT = 34;
|
Keyboard 5 or % |
SCAN_CODE_CARET = 35;
|
Keyboard 6 or ^ |
SCAN_CODE_AMPERSAND = 36;
|
Keyboard 7 or & |
SCAN_CODE_ASTERISK = 37;
|
Keyboard 8 or * |
SCAN_CODE_LEFT_BRACKET = 38;
|
Keyboard 9 or ( |
SCAN_CODE_RIGHT_BRACKET = 39;
|
Keyboard 0 or ) |
SCAN_CODE_DASH = 45;
|
Keyboard - or _ |
SCAN_CODE_UNDERSCORE = 45;
|
Keyboard - or _ |
SCAN_CODE_PLUS = 46;
|
Keyboard = or + |
SCAN_CODE_LEFT_BRACE = 47;
|
Keyboard [ or Left Brace |
SCAN_CODE_RIGHT_BRACE = 48;
|
Keyboard ] or Right Brace |
SCAN_CODE_PIPE = 49;
|
|
SCAN_CODE_NONUS_TILDE = 50;
|
Keyboard Non-US # and ~ |
SCAN_CODE_COLON = 51;
|
Keyboard ; or : |
SCAN_CODE_QUOTATION = 52;
|
Keyboard ' or " |
SCAN_CODE_TILDE = 53;
|
Keyboard ` or ~ |
SCAN_CODE_LESSTHAN = 54;
|
Keyboard , or < |
SCAN_CODE_GREATERTHAN = 55;
|
Keyboard . or > |
SCAN_CODE_QUESTION = 56;
|
Keyboard / or ? |
SCAN_CODE_ALTGR = SCAN_CODE_RIGHT_ALT;
|
Keyboard RightAlt |
SCAN_CODE_KEYPAD_FIRST = SCAN_CODE_NUMLOCK;
|
|
SCAN_CODE_KEYPAD_LAST = SCAN_CODE_KEYPAD_PERIOD;
|
|
[Expand]
Universal color constants
COLOR_* | Basic 32 bit RGB colors (8 bit Transparency, 8 bit Red, 8 bit Green, 8 bit Blue) | |
COLOR_NONE = $00000000;
|
|
COLOR_BLACK = $FF000000;
|
|
COLOR_RED = $FFFF0000;
|
|
COLOR_ORANGE = $FFFF8500;
|
|
COLOR_LEAFGREEN = $FF009900;
|
|
COLOR_GREEN = $FF00FF00;
|
|
COLOR_YELLOW = $FFFFFF00;
|
|
COLOR_DARKGREEN = $FF254117;
|
|
COLOR_DARKGRAY = $FF595959;
|
|
COLOR_BROWN = $FF6F4E37;
|
|
COLOR_INDIGO = $FF2E0854;
|
|
COLOR_RASPBERRY = $FFE30B5C;
|
|
COLOR_GRAY = $FF808080;
|
|
COLOR_PURPLE = $FF4B0082;
|
|
COLOR_PINK = $FFFF0090;
|
|
COLOR_DARKBLUE = $FF0000A0;
|
|
COLOR_SILVER = $FFC0C0C0;
|
|
COLOR_BLUEIVY = $FF3090C7;
|
|
COLOR_MIDGRAY = $FFE0E0E0;
|
|
COLOR_LIGHTGRAY = $FFF7F7F7;
|
|
COLOR_BLUE = $FF0000FF;
|
|
COLOR_MAGENTA = $FFFF00FF;
|
|
COLOR_CYAN = $FF00FFFF;
|
|
COLOR_WHITE = $FFFFFFFF;
|
|
| Color format constants | |
COLOR_FORMAT_ARGB32 = 0;
|
32 bits per pixel Alpha/Red/Green/Blue (ARGB8888) |
COLOR_FORMAT_ABGR32 = 1;
|
32 bits per pixel Alpha/Blue/Green/Red (ABGR8888) |
COLOR_FORMAT_RGBA32 = 2;
|
32 bits per pixel Red/Green/Blue/Alpha (RGBA8888) |
COLOR_FORMAT_BGRA32 = 3;
|
32 bits per pixel Blue/Green/Red/Alpha (BGRA8888) |
COLOR_FORMAT_RGB24 = 4;
|
24 bits per pixel Red/Green/Blue (RGB888) |
COLOR_FORMAT_BGR24 = 5;
|
24 bits per pixel Blue/Green/Red (BGR888) |
COLOR_FORMAT_RGB18 = 6;
|
18 bits per pixel Red/Green/Blue (RGB666) |
COLOR_FORMAT_RGB16 = 7;
|
16 bits per pixel Red/Green/Blue (RGB565) |
COLOR_FORMAT_RGB15 = 8;
|
15 bits per pixel Red/Green/Blue (RGB555) |
COLOR_FORMAT_RGB8 = 9;
|
8 bits per pixel Red/Green/Blue (RGB332) |
COLOR_FORMAT_UNKNOWN = LongWord(-1);
|
|
[Expand]
Universal size constants
SIZE_* | From /include/linux/sizes.h | |
SIZE_0 = $00000000;
|
|
SIZE_1 = $00000001;
|
|
SIZE_2 = $00000002;
|
|
SIZE_4 = $00000004;
|
|
SIZE_8 = $00000008;
|
|
SIZE_16 = $00000010;
|
|
SIZE_32 = $00000020;
|
|
SIZE_64 = $00000040;
|
|
SIZE_128 = $00000080;
|
|
SIZE_256 = $00000100;
|
|
SIZE_512 = $00000200;
|
|
SIZE_1K = $00000400;
|
|
SIZE_2K = $00000800;
|
|
SIZE_4K = $00001000;
|
|
SIZE_8K = $00002000;
|
|
SIZE_16K = $00004000;
|
|
SIZE_32K = $00008000;
|
|
SIZE_64K = $00010000;
|
|
SIZE_128K = $00020000;
|
|
SIZE_256K = $00040000;
|
|
SIZE_512K = $00080000;
|
|
SIZE_1M = $00100000;
|
|
SIZE_2M = $00200000;
|
|
SIZE_4M = $00400000;
|
|
SIZE_8M = $00800000;
|
|
SIZE_16M = $01000000;
|
|
SIZE_32M = $02000000;
|
|
SIZE_64M = $04000000;
|
|
SIZE_128M = $08000000;
|
|
SIZE_256M = $10000000;
|
|
SIZE_512M = $20000000;
|
|
SIZE_1G = $40000000;
|
|
SIZE_2G = $80000000;
|
|
[Expand]
Universal time constants
MILLISECONDS_* MILLISECONDS_PER_SECOND = 1000;
|
|
MICROSECONDS_PER_SECOND = 1000000;
|
|
NANOSECONDS_PER_SECOND = 1000000000;
|
[Expand]
Ultibo time constants
TIME_TICKS_* | 100 nanosecond ticks since 1/1/1601 | |
| Note: Nanoseconds is 10^9 so 100 nanosecond ticks is 10^7 | |
TIME_TICKS_PER_MICROSECOND = 10;
|
10^7 / 10^6 |
TIME_TICKS_PER_MILLISECOND = 10000;
|
10^7 / 10^3 |
TIME_TICKS_PER_SECOND = 10000000;
|
10^7 |
TIME_TICKS_PER_MINUTE = 600000000;
|
60 * 10^7 |
TIME_TICKS_PER_HOUR = 36000000000;
|
60 * 60 * 10^7 |
TIME_TICKS_PER_DAY = 864000000000;
|
24 * 60 * 60 * 10^7 |
TIME_TICKS_TO_1899 = 94353120000000000;
|
Offset between 1/1/1601 (Ultibo) and 30/12/1899 (FreePascal) |
TIME_TICKS_TO_1970 = 116444736000000000;
|
Offset between 1/1/1601 (Ultibo) and 1/1/1970 (Unix/Linux) |
TIME_TICKS_TO_1980 = 119600064000000000;
|
Offset between 1/1/1601 (Ultibo) and 1/1/1980 (DOS) |
TIME_TICKS_TO_200? = 126227808000000000;
|
Offset between 1/1/1601 (Ultibo) and 1/1/2001 (Clock is assumed not set if time is less than this) |
TIME_TICKS_PER_10MILLISECONDS = 100000;
|
10^7 / 10^2 |
[Expand]
Unix/Linux time constants
UNIX_TIME_* | Seconds since 1/1/1970 | |
UNIX_TIME_SECONDS_PER_DAY = 86400;
|
60*60*24; |
UNIX_TIME_DAYS_TO_1970 = 25569.0;
|
Offset between 1899 (FreePascal) and 1970 (Unix/Linux) |
[Expand]
FreePascal time constants
PASCAL_* | TDateTime starts at 30/12/1899 | |
PASCAL_TIME_MILLISECONDS_PER_DAY = 86400000;
|
60*60*24*1000; |
PASCAL_TIME_SECONDS_PER_DAY = 86400;
|
60*60*24; |
PASCAL_TIME_DOS_TIME_START = 2162688;
|
DOS date time value for start of DOS time (1/1/1980) |
PASCAL_DAY_OFFSET = 1.0;
|
TDateTime value 1 day |
PASCAL_MINUTE_OFFSET = 0.000694444444444444;
|
TDateTime value of 1 minute |
[Expand]
System Call constants
SYSTEM_CALL_* SYSTEM_CALL_UNDEFINED = $00000000;
|
|
SYSTEM_CALL_CONTEXT_SWITCH = $00000001;
|
[Expand]
Machine Type constants
MACHINE_TYPE_* MACHINE_TYPE_UNKNOWN = 0;
|
|
MACHINE_TYPE_BCM2708 = 1;
|
Broadcom BCM2708 (Raspberry Pi) |
MACHINE_TYPE_BCM2709 = 2;
|
Broadcom BCM2709 (Raspberry Pi 2) |
MACHINE_TYPE_BCM2710 = 3;
|
Broadcom BCM2710 (Raspberry Pi 3) |
[Expand]
Board Type constants
BOARD_TYPE_* BOARD_TYPE_UNKNOWN = 0;
|
|
BOARD_TYPE_RPIA = 1;
|
Raspberry Pi Model A |
BOARD_TYPE_RPIB = 2;
|
Raspberry Pi Model B |
BOARD_TYPE_RPI_COMPUTE = 3;
|
Raspberry Pi Compute Module |
BOARD_TYPE_RPIA_PLUS = 4;
|
Raspberry Pi Model A+ |
BOARD_TYPE_RPIB_PLUS = 5;
|
Raspberry Pi Model B+ |
BOARD_TYPE_RPI2B = 6;
|
Raspberry Pi 2 Model B |
BOARD_TYPE_RPI_ZERO = 7;
|
Raspberry Pi Model Zero |
BOARD_TYPE_BPI = 8;
|
Banana Pi |
BOARD_TYPE_BPRO = 9;
|
Banana Pro |
BOARD_TYPE_BBB_REVC = 10;
|
Beagle Bone Black (Revision C) |
BOARD_TYPE_CUBOX_I = 11;
|
Cubox i1/i2/i2ex/i4pro/i4x4 |
BOARD_TYPE_HUMMINGBOARD = 12;
|
Hummingboard |
BOARD_TYPE_CREATOR_CI20 = 13;
|
MIPS Creator CI20 |
BOARD_TYPE_PCDUINO? = 14;
|
pcDuino V1 |
BOARD_TYPE_PCDUINO2 = 15;
|
pcDuino V2 |
BOARD_TYPE_PCDUINO3 = 16;
|
pcDuino V3 |
BOARD_TYPE_ODROID_C? = 17;
|
Odroid C1/C1+ |
BOARD_TYPE_ODROID_U2 = 18;
|
Odroid U2 |
BOARD_TYPE_ODROID_U3 = 19;
|
Odroid U3 |
BOARD_TYPE_ODROID_XU3 = 20;
|
Odroid XU3 |
BOARD_TYPE_ODROID_XU4 = 21;
|
Odroid XU4 |
BOARD_TYPE_PC_X86 = 22;
|
PC x86 |
BOARD_TYPE_PC_X86_64 = 23;
|
PC x86 64bit |
BOARD_TYPE_RPI3B = 24;
|
Raspberry Pi 3 Model B |
Type definitions
None defined
Public variables
None defined
Function declarations
None defined
Return to Unit Reference
