Difference between revisions of "Unit GPIO"

Latest revision as of 04:40, 12 September 2023

Multiple GPIO devices can be accommodated, each one is registered with this unit when the driver for the device is loaded and initialized. This unit includes functions for enumerating the devices that are available and each function takes a GPIODevice parameter to allow specifying the exact device to control.

Simplified versions of many of the functions in this unit are provided in the Platform unit to allow control of the default GPIO device and in cases where there is only one device registered these functions will provide most of the capability required.

Constants

GPIO specific constants GPIO_*

`GPIO_NAME_PREFIX = 'GPIO';`	Name prefix for GPIO Devices

GPIO device type GPIO_TYPE_*

`GPIO_TYPE_NONE = 0;`
`GPIO_TYPE_MAX = 0;`
GPIO device type name
`GPIO_TYPE_NAMES:array[GPIO_TYPE_NONE..GPIO_TYPE_MAX] of String = ('GPIO_TYPE_NONE');`

GPIO device state GPIO_STATE_*

`GPIO_STATE_DISABLED = 0;`
`GPIO_STATE_ENABLED = 1;`

`GPIO_STATE_MAX = 1;`

GPIO device flag GPIO_FLAG_*

`GPIO_FLAG_NONE = $00000000;`
`GPIO_FLAG_PULL_UP = $00000001;`	Device supports Pull Up on a pin
`GPIO_FLAG_PULL_DOWN = $00000002;`	Device supports Pull Down on a pin
`GPIO_FLAG_TRIGGER_LOW = $00000004;`	Device supports Trigger on Low level on a pin
`GPIO_FLAG_TRIGGER_HIGH = $00000008;`	Device supports Trigger on High level on a pin
`GPIO_FLAG_TRIGGER_RISING = $00000010;`	Device supports Trigger on Rising edge on a pin
`GPIO_FLAG_TRIGGER_FALLING = $00000020;`	Device supports Trigger on Falling edge on a pin
`GPIO_FLAG_TRIGGER_EDGE = $00000040;`	Device supports Trigger on any edge (Rising or Falling) on a pin
`GPIO_FLAG_TRIGGER_ASYNC = $00000080;`	Device supports Trigger on Asynchronous Rising/Falling edge on a pin

GPIO event flag GPIO_EVENT_FLAG_*

`GPIO_EVENT_FLAG_NONE = $00000000;`
`GPIO_EVENT_FLAG_REPEAT = $00000001;`	Event will be repeated until cancelled
`GPIO_EVENT_FLAG_INTERRUPT = $00000002;`	Event will be dispatched by interrupt handler (If applicable) Caution: Events called by the interrupt handler must obey interrupt rules with regard to locks, memory allocation and latency

GPIO logging GPIO_LOG_*

`GPIO_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG;`	GPIO debugging messages
`GPIO_LOG_LEVEL_INFO = LOG_LEVEL_INFO;`	GPIO informational messages, such as a device being attached or detached
`GPIO_LOG_LEVEL_WARN = LOG_LEVEL_WARN;`	GPIO warning messages
`GPIO_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR;`	GPIO error messages
`GPIO_LOG_LEVEL_NONE = LOG_LEVEL_NONE;`	No GPIO messages

Type definitions

GPIO properties

PGPIOProperties = ^TGPIOProperties;

TGPIOProperties = record

`Flags:LongWord;`	Device flags (eg GPIO_FLAG_TRIGGER_HIGH)
`PinMin:LongWord;`
`PinMax:LongWord;`
`PinCount:LongWord;`
`FunctionMin:LongWord;`
`FunctionMax:LongWord;`
`FunctionCount:LongWord;`

GPIO event

PGPIOEvent = ^TGPIOEvent;

TGPIOEvent = record

`Pin:PGPIOPin;`	GPIO Pin this event belongs to
`Callback:TGPIOCallback;`	Callback function to call when trigger occurs
`Data:Pointer;`	Pointer to pass to the callback function when trigger occurs
`Timeout:LongWord;`	Timeout in milliseconds for this callback (or INFINITE for no timeout)
`Prev:PGPIOEvent;`	Previous event in the list
`Next:PGPIOEvent;`	Next event in the list

GPIO pin

PGPIOPin = ^TGPIOPin;

TGPIOPin = record

Note: Forward declared for GPIOEvent
`GPIO:PGPIODevice;`	GPIO device this pin belongs to
`Pin:LongWord;`	Pin number of this pin on the device (May be used by drivers for internal numbering)
`Flags:LongWord;`	Current flags for this pin (eg GPIO_EVENT_FLAG_REPEAT)
`Trigger:LongWord;`	Current trigger value for this pin (or GPIO_TRIGGER_NONE if no triggers current)
`Count:LongWord;`	Count of threads and events waiting for the trigger
`Event:TEventHandle;`	Event for threads waiting for the trigger
`Events:PGPIOEvent;`	List of events waiting for the trigger

GPIO enumeration callback

`TGPIOEnumerate = function(GPIO:PGPIODevice; Data:Pointer):LongWord;`

GPIO notification callback

`TGPIONotification = function(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;`

GPIO device start

`TGPIODeviceStart = function(GPIO:PGPIODevice):LongWord;`

GPIO device stop

`TGPIODeviceStop = function(GPIO:PGPIODevice):LongWord;`

GPIO device read

`TGPIODeviceRead = function(GPIO:PGPIODevice; Reg:LongWord):LongWord;`

GPIO device write

`TGPIODeviceWrite = procedure(GPIO:PGPIODevice; Reg,Value:LongWord);`

GPIO device input get

`TGPIODeviceInputGet = function(GPIO:PGPIODevice; Pin:LongWord):LongWord;`

GPIO device input wait

`TGPIODeviceInputWait = function(GPIO:PGPIODevice; Pin,Trigger,Timeout:LongWord):LongWord;`

GPIO device input event

`TGPIODeviceInputEvent = function(GPIO:PGPIODevice; Pin,Trigger,Flags,Timeout:LongWord; Callback:TGPIOCallback; Data:Pointer):LongWord;`

GPIO device input cancel

`TGPIODeviceInputCancel = function(GPIO:PGPIODevice; Pin:LongWord):LongWord;`

GPIO device output set

`TGPIODeviceOutputSet = function(GPIO:PGPIODevice; Pin,Level:LongWord):LongWord;`

GPIO device pull get

`TGPIODevicePullGet = function(GPIO:PGPIODevice; Pin:LongWord):LongWord;`

GPIO device pull select

`TGPIODevicePullSelect = function(GPIO:PGPIODevice; Pin,Mode:LongWord):LongWord;`

GPIO device function get

`TGPIODeviceFunctionGet = function(GPIO:PGPIODevice; Pin:LongWord):LongWord;`

GPIO device function select

`TGPIODeviceFunctionSelect = function(GPIO:PGPIODevice; Pin,Mode:LongWord):LongWord;`

GPIO device get properties

`TGPIODeviceGetProperties = function(GPIO:PGPIODevice; Properties:PGPIOProperties):LongWord;`

GPIO device

PGPIODevice = ^TGPIODevice;

TGPIODevice = record

Note: Forward declared for GPIOPin
Device Properties
`Device:TDevice;`	The Device entry for this GPIO
GPIO Properties
`GPIOId:LongWord;`	Unique Id of this GPIO in the GPIO table
`GPIOState:LongWord;`	GPIO state (eg GPIO_STATE_ENABLED)
`DeviceStart:TGPIODeviceStart;`	A Device specific DeviceStart method implementing the standard GPIO device interface (Mandatory)
`DeviceStop:TGPIODeviceStop;`	A Device specific DeviceStop method implementing the standard GPIO device interface (Mandatory)
`DeviceRead:TGPIODeviceRead;`	A Device specific DeviceRead method implementing the standard GPIO device interface (Or nil if the default method is suitable)
`DeviceWrite:TGPIODeviceWrite;`	A Device specific DeviceWrite method implementing the standard GPIO device interface (Or nil if the default method is suitable)
`DeviceInputGet:TGPIODeviceInputGet;`	A Device specific DeviceInputGet method implementing the standard GPIO device interface (Mandatory)
`DeviceInputWait:TGPIODeviceInputWait;`	A Device specific DeviceInputWait method implementing the standard GPIO device interface (Or nil if the operation is not supported)
`DeviceInputEvent:TGPIODeviceInputEvent;`	A Device specific DeviceInputEvent method implementing the standard GPIO device interface (Or nil if the operation is not supported)
`DeviceInputCancel:TGPIODeviceInputCancel;`	A Device specific DeviceInputCancel method implementing the standard GPIO device interface (Or nil if the operation is not supported)
`DeviceOutputSet:TGPIODeviceOutputSet;`	A Device specific DeviceOutputSet method implementing the standard GPIO device interface (Mandatory)
`DevicePullGet:TGPIODevicePullGet;`	A Device specific DevicePullGet method implementing the standard GPIO device interface (Or nil if the operation is not supported)
`DevicePullSelect:TGPIODevicePullSelect;`	A Device specific DevicePullSelect method implementing the standard GPIO device interface (Or nil if the operation is not supported)
`DeviceFunctionGet:TGPIODeviceFunctionGet;`	A Device specific DeviceFunctionGet method implementing the standard GPIO device interface (Or nil if the operation is not supported)
`DeviceFunctionSelect:TGPIODeviceFunctionSelect;`	A Device specific DeviceFunctionSelect method implementing the standard GPIO device interface (Or nil if the operation is not supported)
`DeviceGetProperties:TGPIODeviceGetProperties;`	A Device specific DeviceGetProperties method implementing the standard GPIO device interface (Or nil if the default method is suitable)
Driver Properties
`Lock:TMutexHandle;`	Device lock
`Address:Pointer;`	Device register base address
`Pins:array of TGPIOPin;`	Device pins
`Properties:TGPIOProperties;`	Device properties
Statistics Properties
`GetCount:LongWord;`
`SetCount:LongWord;`
`WaitCount:LongWord;`
`EventCount:LongWord;`
Internal Properties
`Prev:PGPIODevice;`	Previous entry in GPIO table
`Next:PGPIODevice;`	Next entry in GPIO table

GPIO pin information

PGPIOInfo = ^TGPIOInfo;

TGPIOInfo = record

Note: Used by other units to pass complete details of a GPIO pin
`GPIO:PGPIODevice;`	Device for this GPIO pin
`Pin:LongWord;`	Pin number (eg GPIO_PIN_59)
`Func:LongWord;`	Function value (or GPIO_FUNCTION_UNKNOWN)
`Pull:LongWord;`	Pull Up/Down value (or GPIO_PULL_UNKNOWN)
`Trigger:LongWord;`	Trigger value (or GPIO_TRIGGER_UNKNOWN)

Public variables

GPIO logging

`GPIO_DEFAULT_LOG_LEVEL:LongWord = GPIO_LOG_LEVEL_DEBUG;`	Minimum level for GPIO messages. Only messages with level greater than or equal to this will be printed.

`GPIO_LOG_ENABLED:Boolean;`

Function declarations

Initialization functions

procedure GPIOInit;

Description: To be documented

Note	None documented

GPIO functions

function GPIODeviceStart(GPIO:PGPIODevice):LongWord;

Description: Start the specified GPIO device and enable access

GPIO	The GPIO device to start
Return	ERROR_SUCCESS if completed or another error code on failure

function GPIODeviceStop(GPIO:PGPIODevice):LongWord;

Description: Stop the specified GPIO device and disable access

GPIO	The GPIO device to stop
Return	ERROR_SUCCESS if completed or another error code on failure

function GPIODeviceRead(GPIO:PGPIODevice; Reg:LongWord):LongWord;

Description: Perform a direct read from a register of the specified GPIO device

GPIO	The GPIO device to read from
Reg	The memory register to read from
Return	The value of the memory register

procedure GPIODeviceWrite(GPIO:PGPIODevice; Reg,Value:LongWord);

Description: Perform a direct write to a register of the specified GPIO device

GPIO	The GPIO device to write to
Reg	The memory register to write to
Return	The value to write to the register

function GPIODeviceInputGet(GPIO:PGPIODevice; Pin:LongWord):LongWord;

Description: Get the current state of an input pin on the specified GPIO device

GPIO	The GPIO device to get from
Pin	The pin to get the state for (eg GPIO_PIN_1)
Return	The current state (eg GPIO_LEVEL_HIGH) or GPIO_LEVEL_UNKNOWN on failure

function GPIODeviceInputWait(GPIO:PGPIODevice; Pin,Trigger,Timeout:LongWord):LongWord;

Description: Wait for the state of a input pin to change on the specified GPIO device

GPIO	The GPIO device to wait for
Pin	The pin to wait for the state to change (eg GPIO_PIN_1)
Trigger	The trigger event to wait for (eg GPIO_TRIGGER_HIGH)
Timeout	Number of milliseconds to wait for the change (INFINITE to wait forever)
Return	The state after the change (eg GPIO_LEVEL_HIGH) or GPIO_LEVEL_UNKNOWN on failure or timeout

function GPIODeviceInputEvent(GPIO:PGPIODevice; Pin,Trigger,Flags,Timeout:LongWord; Callback:TGPIOCallback; Data:Pointer):LongWord;

Description: Schedule a function to be called when the state of a input pin changes on the specified GPIO device

GPIO	The GPIO device to schedule the callback for
Pin	The pin to schedule the state change for (eg GPIO_PIN_1)
Trigger	The trigger event which will cause the function to be called (eg GPIO_TRIGGER_HIGH)
Flags	The flags to control the event (eg GPIO_EVENT_FLAG_REPEAT)
Timeout	The number of milliseconds before the scheduled trigger expires (INFINITE to never expire)
Callback	The function to be called when the trigger occurs
Data	A pointer to be pass to the function when the trigger occurs (Optional)
Return	ERROR_SUCCESS if the trigger was scheduled successfully or another error code on failure
Note	The pin and trigger that caused the event will be passed to the callback function

function GPIODeviceInputCancel(GPIO:PGPIODevice; Pin:LongWord):LongWord;

Description: Cancel a previously scheduled event callback function for an input pin on the specified GPIO device

GPIO	The GPIO device to cancel the callback for
Pin	The pin to cancel the state change for (eg GPIO_PIN_1)
Return	ERROR_SUCCESS if the callback was cancelled successfully or another error code on failure

function GPIODeviceOutputSet(GPIO:PGPIODevice; Pin,Level:LongWord):LongWord;

Description: Set the state of a output pin on the specified GPIO device

GPIO	The GPIO device to set for
Pin	The pin to set the state for (eg GPIO_PIN_1)
Level	The state to set the pin to (eg GPIO_LEVEL_HIGH)
Return	ERROR_SUCCESS if completed successfully or another error code on failure

function GPIODeviceLevelGet(GPIO:PGPIODevice; Pin:LongWord):LongWord;

Description: Get the current level (state) of a pin on the specified GPIO device

GPIO	The GPIO device to get from
Pin	The pin to get the level for (eg GPIO_PIN_1)
Return	The current level (eg GPIO_LEVEL_HIGH) or GPIO_LEVEL_UNKNOWN on failure
Note	This function is a synonym for GPIODeviceInputGet as in many cases the level can be read from a pin regardless of input or output mode. This may help to make code clearer or easier to understand in some cases.

function GPIODeviceLevelSet(GPIO:PGPIODevice; Pin,Level:LongWord):LongWord;

Description: Set the level (state) of a pin on the specified GPIO device

GPIO	The GPIO device to set for
Pin	The pin to set the level for (eg GPIO_PIN_1)
Level	The level to set the pin to (eg GPIO_LEVEL_HIGH)
Return	ERROR_SUCCESS if completed successfully or another error code on failure
Note	This function is a synonym for GPIODeviceOutputSet as in many cases the level can be set for a pin regardless of input or output mode. This may help to make code clearer or easier to understand in some cases.

function GPIODevicePullGet(GPIO:PGPIODevice;Pin:LongWord):LongWord;

Description: Get the current pull state of a pin on the specified GPIO device

GPIO	The GPIO device to get from
Pin	The pin to get the pull state for (eg GPIO_PIN_1)
Return	The current pull state of the pin (eg GPIO_PULL_UP) or GPIO_PULL_UNKNOWN on failure

function GPIODevicePullSelect(GPIO:PGPIODevice; Pin,Mode:LongWord):LongWord;

Description: Change the pull state of a pin on the specified GPIO device

GPIO	The GPIO device to set for
Pin	The pin to change the pull state for (eg GPIO_PIN_1)
Mode	The pull state to set for the pin (eg GPIO_PULL_UP)
Return	ERROR_SUCCESS if completed successfully or another error code on failure

function GPIODeviceFunctionGet(GPIO:PGPIODevice; Pin:LongWord):LongWord;

Description: Get the current function of a pin on the specified GPIO device

GPIO	The GPIO device to get from
Pin	The pin to get the function for (eg GPIO_PIN_1)
Return	The current function of the pin (eg GPIO_FUNCTION_IN) or GPIO_FUNCTION_UNKNOWN on failure

function GPIODeviceFunctionSelect(GPIO:PGPIODevice; Pin,Mode:LongWord):LongWord;

Description: Change the function of a pin on the specified GPIO device

GPIO	The GPIO device to set for
Pin	The pin to change the function for (eg GPIO_PIN_1)
Mode	The function to set for the pin (eg GPIO_FUNCTION_OUT)
Return	ERROR_SUCCESS if completed successfully or another error code on failure

function GPIODeviceProperties(GPIO:PGPIODevice; Properties:PGPIOProperties):LongWord; inline;

Description: Get the properties for the specified GPIO device

GPIO	The GPIO device to get properties from
Properties	Pointer to a TGPIOProperties structure to fill in
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Replaced by GPIODeviceGetProperties for consistency

function GPIODeviceGetProperties(GPIO:PGPIODevice; Properties:PGPIOProperties):LongWord;

Description: Get the properties for the specified GPIO device

GPIO	The GPIO device to get properties from
Properties	Pointer to a TGPIOProperties structure to fill in
Return	ERROR_SUCCESS if completed or another error code on failure

function GPIODeviceCreate:PGPIODevice;

Description: Create a new GPIO entry

Return	Pointer to new GPIO entry or nil if GPIO could not be created

function GPIODeviceCreateEx(Size:LongWord):PGPIODevice;

Description: Create a new GPIO entry

Size	Size in bytes to allocate for new GPIO (Including the GPIO entry)
Return	Pointer to new GPIO entry or nil if GPIO could not be created

function GPIODeviceDestroy(GPIO:PGPIODevice):LongWord;

Description: Destroy an existing GPIO entry

GPIO	The GPIO device to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function GPIODeviceRegister(GPIO:PGPIODevice):LongWord;

Description: Register a new GPIO in the GPIO table

GPIO	The GPIO device to register
Return	ERROR_SUCCESS if completed or another error code on failure

function GPIODeviceDeregister(GPIO:PGPIODevice):LongWord;

Description: Deregister a GPIO in the GPIO table

GPIO	The GPIO device to deregister
Return	ERROR_SUCCESS if completed or another error code on failure

function GPIODeviceFind(GPIOId:LongWord):PGPIODevice;

Description: Find a GPIO device by ID in the GPIO table

GPIOId	The ID number of the GPIO device to find
Return	Pointer to GPIO device entry or nil if not found

function GPIODeviceFindByName(const Name:String):PGPIODevice; inline;

Description: Find a GPIO device by name in the GPIO table

Name	The name of the GPIO to find (eg GPIO0)
Return	Pointer to GPIO device entry or nil if not found

function GPIODeviceFindByDescription(const Description:String):PGPIODevice; inline;

Description: Find a GPIO device by description in the GPIO table

Description	The description of the GPIO to find (eg BCM2836 GPIO)
Return	Pointer to GPIO device entry or nil if not found

function GPIODeviceEnumerate(Callback:TGPIOEnumerate; Data:Pointer):LongWord;

Description: Enumerate all GPIO devices in the GPIO table

Callback	The callback function to call for each GPIO in the table
Data	A private data pointer to pass to callback for each GPIO in the table
Note	ERROR_SUCCESS if completed or another error code on failure

function GPIODeviceNotification(GPIO:PGPIODevice; Callback:TGPIONotification; Data:Pointer; Notification,Flags:LongWord):LongWord;

Description: Register a notification for GPIO device changes

GPIO	The GPIO device to notify changes for (Optional, pass nil for all GPIO devices)
Callback	The function to call when a notification event occurs
Data	A private data pointer to pass to callback when a notification event occurs
Notification	The events to register for notification of (eg DEVICE_NOTIFICATION_REGISTER)
Flags	The flags to control the notification (eg NOTIFIER_FLAG_WORKER)

RTL GPIO functions

function SysGPIOAvailable:Boolean;

Description: Check if a GPIO device is available

Note	None documented

function SysGPIOInputGet(Pin:LongWord):LongWord;

Description: Get the current state of a GPIO input pin

Pin	The pin to get the state for (eg GPIO_PIN_1)
Return	The current state (eg GPIO_LEVEL_HIGH) or GPIO_LEVEL_UNKNOWN on failure

function SysGPIOInputWait(Pin,Trigger,Timeout:LongWord):LongWord;

Description: Wait for the state of a GPIO input pin to change

Pin	The pin to wait for the state to change (eg GPIO_PIN_1)
Trigger	The trigger event to wait for (eg GPIO_TRIGGER_HIGH)
Timeout	Number of milliseconds to wait for the change (INFINITE to wait forever)
Return	The state after the change (eg GPIO_LEVEL_HIGH) or GPIO_LEVEL_UNKNOWN on failure or timeout

function SysGPIOInputEvent(Pin,Trigger,Timeout:LongWord; Callback:TGPIOCallback; Data:Pointer):LongWord;

Description: Schedule a function to be called when the state of a GPIO input pin changes

Pin	The pin to schedule the state change for (eg GPIO_PIN_1)
Trigger	The trigger event which will cause the function to be called (eg GPIO_TRIGGER_HIGH)
Timeout	The number of milliseconds before the scheduled trigger expires (INFINITE to never expire)
Callback	The function to be called when the trigger occurs
Data	A pointer to be pass to the function when the trigger occurs (Optional)
Return	ERROR_SUCCESS if the trigger was scheduled successfully or another error code on failure
Note	The pin and trigger that caused the event will be passed to the callback function

function SysGPIOOutputSet(Pin,Level:LongWord):LongWord;

Description: Set the state of a GPIO output pin

Pin	The pin to set the state for (eg GPIO_PIN_1)
Level	The state to set the pin to (eg GPIO_LEVEL_HIGH)
Return	ERROR_SUCCESS if completed successfully or another error code on failure

function SysGPIOPullGet(Pin:LongWord):LongWord;

Description: Get the current pull state of a GPIO pin

Pin	The pin to get the pull state for (eg GPIO_PIN_1)
Return	The current pull state of the pin (eg GPIO_PULL_UP) or GPIO_PULL_UNKNOWN on failure

function SysGPIOPullSelect(Pin,Mode:LongWord):LongWord;

Description: Change the pull state of a GPIO pin

Pin	The pin to change the pull state for (eg GPIO_PIN_1)
Mode	The pull state to set for the pin (eg GPIO_PULL_UP)
Return	ERROR_SUCCESS if completed successfully or another error code on failure

function SysGPIOFunctionGet(Pin:LongWord):LongWord;

Description: Get the current function of a GPIO pin

Pin	The pin to get the function for (eg GPIO_PIN_1)
Return	The current function of the pin (eg GPIO_FUNCTION_IN) or GPIO_FUNCTION_UNKNOWN on failure

function SysGPIOFunctionSelect(Pin,Mode:LongWord):LongWord;

Description: Change the function of a GPIO pin

Pin	The pin to change the function for (eg GPIO_PIN_1)
Mode	The function to set for the pin (eg GPIO_FUNCTION_OUT)
Return	ERROR_SUCCESS if completed successfully or another error code on failure

GPIO helper functions

function GPIOGetCount:LongWord;

Description: Get the current GPIO count

Note	None documented

function GPIODeviceGetDefault:PGPIODevice;

Description: Get the current default GPIO device

Note	None documented

function GPIODeviceSetDefault(GPIO:PGPIODevice):LongWord;

Description: Set the current default GPIO device

Note	None documented

function GPIODeviceCheck(GPIO:PGPIODevice):PGPIODevice;

Description: Check if the supplied GPIO is in the GPIO table

Note	None documented

function GPIOTypeToString(GPIOType:LongWord):String;

Description: Convert a GPIO type value to a string

Note	None documented

function GPIOStateToString(GPIOState:LongWord):String;

Description: Convert a GPIO state value to a string

Note	None documented

function GPIODeviceCreateEvent(GPIO:PGPIODevice; Pin:PGPIOPin; Callback:TGPIOCallback; Data:Pointer; Timeout:LongWord):PGPIOEvent;

Description: Create a new event using the supplied parameters

Note	Event must be registered by calling GPIODeviceRegisterEvent Caller must hold the GPIO device lock

function GPIODeviceDestroyEvent(GPIO:PGPIODevice; Event:PGPIOEvent):LongWord;

Description: Destroy an existing event

Note	Event must be deregistered first by calling GPIODeviceDeregisterEvent Caller must hold the GPIO device lock

function GPIODeviceRegisterEvent(GPIO:PGPIODevice; Pin:PGPIOPin; Event:PGPIOEvent):LongWord;

Description: Register an event in the event list of the supplied Pin

Note	Event must be created by calling GPIODeviceCreateEvent Caller must hold the GPIO device lock

function GPIODeviceDeregisterEvent(GPIO:PGPIODevice;Pin:PGPIOPin;Event:PGPIOEvent):LongWord;

Description: Deregister an event in the event list of the supplied Pin

Note	Event must be destroyed by calling GPIODeviceDestroyEvent Caller must hold the GPIO device lock

procedure GPIOLog(Level:LongWord; GPIO:PGPIODevice; const AText:String);

Description: To be documented

Note	None documented

procedure GPIOLogInfo(GPIO:PGPIODevice; const AText:String); inline;

Description: To be documented

Note	None documented

procedure GPIOLogWarn(GPIO:PGPIODevice; const AText:String); inline;

Description: To be documented

Note	None documented

procedure GPIOLogError(GPIO:PGPIODevice; const AText:String); inline;

Description: To be documented

Note	None documented

procedure GPIOLogDebug(GPIO:PGPIODevice; const AText:String); inline;

Description: To be documented

Note	None documented

function GPIOPinToString(Pin:LongWord):String;

Description: To be documented

Note	None documented

function GPIOLevelToString(Level:LongWord):String;

Description: To be documented

Note	None documented

function GPIOTriggerToString(Trigger:LongWord):String;

Description: To be documented

Note	None documented

function GPIOPullToString(Value:LongWord):String;

Description: To be documented

Note	None documented

function GPIOFunctionToString(Value:LongWord):String;

Description: To be documented

Note	None documented

Return to Unit Reference

Difference between revisions of "Unit GPIO"

Latest revision as of 04:40, 12 September 2023

Contents

Description

Constants

Type definitions

Public variables

Function declarations

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 5: / Line 5: @@
 ----
-'''Ultibo GPIO interface unit'''
+'''Ultibo GPIO Interface unit'''
 GPIO devices represent the external or internal pins available on most system on chip (SoC) devices to provide control and interfacing capabilities for both hardware and software.
@@ Line 11: / Line 11: @@
 This unit maintains pin numbering exactly as per the SoC documentation but abstracts other features such as alternate function selects to avoid exposing chip specific values via the API.
-Not all GPIO devices support the same feature set so the GPIODeviceProperties function returns a structure which describes the number of pins as well as minimum and maximum pin numbers along with a set of flags that indicate what functionality is supported by the device.
+Not all GPIO devices support the same feature set so the GPIODeviceGetProperties function returns a structure which describes the number of pins as well as minimum and maximum pin numbers along with a set of flags that indicate what functionality is supported by the device.
-Multiple GPIO devices can be accomodated, each one is registered with this unit when the driver for the device is loaded and initialized. This unit includes functions for enumerating the devices that are available and each function takes a GPIODevice parameter to allow specifying the exact device to control.
+Multiple GPIO devices can be accommodated, each one is registered with this unit when the driver for the device is loaded and initialized. This unit includes functions for enumerating the devices that are available and each function takes a GPIODevice parameter to allow specifying the exact device to control.
 Simplified versions of many of the functions in this unit are provided in the Platform unit to allow control of the default GPIO device and in cases where there is only one device registered these functions will provide most of the capability required.
@@ Line 33: / Line 33: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''GPIO device type constants''' <code> GPIO_TYPE_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''GPIO device type''' <code> GPIO_TYPE_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 39: / Line 39: @@
 | <code>GPIO_TYPE_NONE = 0;</code>
 | style="width: 50%;"|&nbsp;
+|-
+| <code>GPIO_TYPE_MAX = 0;</code>
+| &nbsp;
+|-
+|colspan="2"|''GPIO device type name''
+|-
+|colspan="2"|<code>GPIO_TYPE_NAMES:array[GPIO_TYPE_NONE..GPIO_TYPE_MAX] of String = ('GPIO_TYPE_NONE');</code>
 |-
 |}
@@ Line 44: / Line 51: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''GPIO device state constants''' <code> GPIO_STATE_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''GPIO device state''' <code> GPIO_STATE_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 52: / Line 59: @@
 |-
 | <code>GPIO_STATE_ENABLED = 1;</code>
+| &nbsp;
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>GPIO_STATE_MAX = 1;</code>
 | &nbsp;
 |-
@@ Line 58: / Line 70: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''GPIO device flag constants''' <code> GPIO_FLAG_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''GPIO device flag''' <code> GPIO_FLAG_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 93: / Line 105: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''GPIO event flag constants''' <code> GPIO_EVENT_FLAG_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''GPIO event flag''' <code> GPIO_EVENT_FLAG_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 111: / Line 123: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
-<div style="font-size: 14px; padding-left: 12px;">'''GPIO logging constants''' <code> GPIO_LOG_* </code></div>
+<div style="font-size: 14px; padding-left: 12px;">'''GPIO logging''' <code> GPIO_LOG_* </code></div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
@@ Line 120: / Line 132: @@
 | <code>GPIO_LOG_LEVEL_INFO = LOG_LEVEL_INFO;</code>
 | GPIO informational messages, such as a device being attached or detached
+|-
+| <code>GPIO_LOG_LEVEL_WARN = LOG_LEVEL_WARN;</code>
+| GPIO warning messages
 |-
 | <code>GPIO_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR;</code>
@@ Line 134: / Line 149: @@
 ----
-''To be documented''
+'''GPIO properties'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PGPIOProperties = ^TGPIOProperties;</code>
+<code>TGPIOProperties = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>Flags:LongWord;</code>
+| Device flags (eg GPIO_FLAG_TRIGGER_HIGH)
+|-
+| <code>PinMin:LongWord;</code>
+| &nbsp;
+|-
+| <code>PinMax:LongWord;</code>
+| &nbsp;
+|-
+| <code>PinCount:LongWord;</code>
+| &nbsp;
+|-
+| <code>FunctionMin:LongWord;</code>
+| &nbsp;
+|-
+| <code>FunctionMax:LongWord;</code>
+| &nbsp;
+|-
+| <code>FunctionCount:LongWord;</code>
+| &nbsp;
+|-
+|}
+</div></div>
+'''GPIO event'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PGPIOEvent = ^TGPIOEvent;</code>
+<code>TGPIOEvent = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>Pin:PGPIOPin;</code>
+| GPIO Pin this event belongs to
+|-
+| <code>Callback:TGPIOCallback;</code>
+| Callback function to call when trigger occurs
+|-
+| <code>Data:Pointer;</code>
+| Pointer to pass to the callback function when trigger occurs
+|-
+| <code>Timeout:LongWord;</code>
+| Timeout in milliseconds for this callback (or INFINITE for no timeout)
+|-
+| <code>Prev:PGPIOEvent;</code>
+| Previous event in the list
+|-
+| <code>Next:PGPIOEvent;</code>
+| Next event in the list
+|-
+|}
+</div></div>
+'''GPIO pin'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PGPIOPin = ^TGPIOPin;</code>
+<code>TGPIOPin = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|Note: Forward declared for GPIOEvent
+|-
+| <code>GPIO:PGPIODevice;</code>
+| GPIO device this pin belongs to
+|-
+| <code>Pin:LongWord;</code>
+| Pin number of this pin on the device (May be used by drivers for internal numbering)
+|-
+| <code>Flags:LongWord;</code>
+| Current flags for this pin (eg GPIO_EVENT_FLAG_REPEAT)
+|-
+| <code>Trigger:LongWord;</code>
+| Current trigger value for this pin (or GPIO_TRIGGER_NONE if no triggers current)
+|-
+| <code>Count:LongWord;</code>
+| Count of threads and events waiting for the trigger
+|-
+| <code>Event:TEventHandle;</code>
+| Event for threads waiting for the trigger
+|-
+| <code>Events:PGPIOEvent;</code>
+| List of events waiting for the trigger
+|-
+|}
+</div></div>
+'''GPIO enumeration callback'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIOEnumerate = function(GPIO:PGPIODevice; Data:Pointer):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO notification callback'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIONotification = function(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device start'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceStart = function(GPIO:PGPIODevice):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device stop'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceStop = function(GPIO:PGPIODevice):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device read'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceRead = function(GPIO:PGPIODevice; Reg:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device write'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceWrite = procedure(GPIO:PGPIODevice; Reg,Value:LongWord);</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device input get'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceInputGet = function(GPIO:PGPIODevice; Pin:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device input wait'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceInputWait = function(GPIO:PGPIODevice; Pin,Trigger,Timeout:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device input event'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceInputEvent = function(GPIO:PGPIODevice; Pin,Trigger,Flags,Timeout:LongWord; Callback:TGPIOCallback; Data:Pointer):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device input cancel'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceInputCancel = function(GPIO:PGPIODevice; Pin:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device output set'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceOutputSet = function(GPIO:PGPIODevice; Pin,Level:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device pull get'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODevicePullGet = function(GPIO:PGPIODevice; Pin:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device pull select'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODevicePullSelect = function(GPIO:PGPIODevice; Pin,Mode:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device function get'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceFunctionGet = function(GPIO:PGPIODevice; Pin:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device function select'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceFunctionSelect = function(GPIO:PGPIODevice; Pin,Mode:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device get properties'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TGPIODeviceGetProperties = function(GPIO:PGPIODevice; Properties:PGPIOProperties):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''GPIO device'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PGPIODevice = ^TGPIODevice;</code>
+<code>TGPIODevice = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|Note: Forward declared for GPIOPin
+|-
+|colspan="2"|''Device Properties''
+|-
+| <code>Device:TDevice;</code>
+| The Device entry for this GPIO
+|-
+|colspan="2"|''GPIO Properties''
+|-
+| <code>GPIOId:LongWord;</code>
+| Unique Id of this GPIO in the GPIO table
+|-
+| <code>GPIOState:LongWord;</code>
+| GPIO state (eg GPIO_STATE_ENABLED)
+|-
+| <code>DeviceStart:TGPIODeviceStart;</code>
+| A Device specific DeviceStart method implementing the standard GPIO device interface (Mandatory)
+|-
+| <code>DeviceStop:TGPIODeviceStop;</code>
+| A Device specific DeviceStop method implementing the standard GPIO device interface (Mandatory)
+|-
+| <code>DeviceRead:TGPIODeviceRead;</code>
+| A Device specific DeviceRead method implementing the standard GPIO device interface (Or nil if the default method is suitable)
+|-
+| <code>DeviceWrite:TGPIODeviceWrite;</code>
+| A Device specific DeviceWrite method implementing the standard GPIO device interface (Or nil if the default method is suitable)
+|-
+| <code>DeviceInputGet:TGPIODeviceInputGet;</code>
+| A Device specific DeviceInputGet method implementing the standard GPIO device interface (Mandatory)
+|-
+| <code>DeviceInputWait:TGPIODeviceInputWait;</code>
+| A Device specific DeviceInputWait method implementing the standard GPIO device interface (Or nil if the operation is not supported)
+|-
+| <code>DeviceInputEvent:TGPIODeviceInputEvent;</code>
+| A Device specific DeviceInputEvent method implementing the standard GPIO device interface (Or nil if the operation is not supported)
+|-
+| <code>DeviceInputCancel:TGPIODeviceInputCancel;</code>
+| A Device specific DeviceInputCancel method implementing the standard GPIO device interface (Or nil if the operation is not supported)
+|-
+| <code>DeviceOutputSet:TGPIODeviceOutputSet;</code>
+| A Device specific DeviceOutputSet method implementing the standard GPIO device interface (Mandatory)
+|-
+| <code>DevicePullGet:TGPIODevicePullGet;</code>
+| A Device specific DevicePullGet method implementing the standard GPIO device interface (Or nil if the operation is not supported)
+|-
+| <code>DevicePullSelect:TGPIODevicePullSelect;</code>
+| A Device specific DevicePullSelect method implementing the standard GPIO device interface (Or nil if the operation is not supported)
+|-
+| <code>DeviceFunctionGet:TGPIODeviceFunctionGet;</code>
+| A Device specific DeviceFunctionGet method implementing the standard GPIO device interface (Or nil if the operation is not supported)
+|-
+| <code>DeviceFunctionSelect:TGPIODeviceFunctionSelect;</code>
+| A Device specific DeviceFunctionSelect method implementing the standard GPIO device interface (Or nil if the operation is not supported)
+|-
+| <code>DeviceGetProperties:TGPIODeviceGetProperties;</code>
+| A Device specific DeviceGetProperties method implementing the standard GPIO device interface (Or nil if the default method is suitable)
+|-
+|colspan="2"|''Driver Properties''
+|-
+| <code>Lock:TMutexHandle;</code>
+| Device lock
+|-
+| <code>Address:Pointer;</code>
+| Device register base address
+|-
+| <code>Pins:array of TGPIOPin;</code>
+| Device pins
+|-
+| <code>Properties:TGPIOProperties;</code>
+| Device properties
+|-
+|colspan="2"|''Statistics Properties''
+|-
+| <code>GetCount:LongWord;</code>
+| &nbsp;
+|-
+| <code>SetCount:LongWord;</code>
+| &nbsp;
+|-
+| <code>WaitCount:LongWord;</code>
+| &nbsp;
+|-
+| <code>EventCount:LongWord;</code>
+| &nbsp;
+|-
+|colspan="2"|''Internal Properties''
+|-
+| <code>Prev:PGPIODevice;</code>
+| Previous entry in GPIO table
+|-
+| <code>Next:PGPIODevice;</code>
+| Next entry in GPIO table
+|-
+|}
+</div></div>
+'''GPIO pin information'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PGPIOInfo = ^TGPIOInfo;</code>
+<code>TGPIOInfo = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|Note: Used by other units to pass complete details of a GPIO pin
+|-
+| <code>GPIO:PGPIODevice;</code>
+| Device for this GPIO pin
+|-
+| <code>Pin:LongWord;</code>
+| Pin number (eg GPIO_PIN_59)
+|-
+| <code>Func:LongWord;</code>
+| Function value (or GPIO_FUNCTION_UNKNOWN)
+|-
+| <code>Pull:LongWord;</code>
+| Pull Up/Down value (or GPIO_PULL_UNKNOWN)
+|-
+| <code>Trigger:LongWord;</code>
+| Trigger value (or GPIO_TRIGGER_UNKNOWN)
+|-
+|}
+</div></div>
+<br />
 === Public variables ===
 ----
-''To be documented''
+'''GPIO logging'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>GPIO_DEFAULT_LOG_LEVEL:LongWord = GPIO_LOG_LEVEL_DEBUG;</code>
+| style="width: 40%;"|Minimum level for GPIO messages. Only messages with level greater than or equal to this will be printed.
+|-
+|}
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>GPIO_LOG_ENABLED:Boolean;</code>
+| style="width: 40%;"|
+|-
+|}
+<br />
 === Function declarations ===
 ----
@@ Line 154: / Line 559: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 169: / Line 574: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to start
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure
 |-
@@ Line 184: / Line 589: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to stop
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure
 |-
@@ Line 195: / Line 600: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function GPIODeviceRead(GPIO:PGPIODevice; Reg:LongWord):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Perform a direct read from a register of the specified GPIO device</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Return'''
+! GPIO
+| The GPIO device to read from
+|-
+! Reg
+| The memory register to read from
+|-
+! Return
 | The value of the memory register
 |-
@@ Line 211: / Line 622: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to write to
 |-
-! '''Reg'''
+! Reg
 | The memory register to write to
 |-
-! '''Return'''
+! Return
 | The value to write to the register
 |-
@@ Line 229: / Line 640: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! GPIO
+| The GPIO device to get from
+|-
+! Pin
 | The pin to get the state for (eg GPIO_PIN_1)
 |-
-! '''Return'''
+! Return
 | The current state (eg GPIO_LEVEL_HIGH) or GPIO_LEVEL_UNKNOWN on failure
 |-
@@ Line 244: / Line 658: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to wait for
 |-
-! '''Pin'''
+! Pin
 | The pin to wait for the state to change (eg GPIO_PIN_1)
 |-
-! '''Trigger'''
+! Trigger
 | The trigger event to wait for (eg GPIO_TRIGGER_HIGH)
 |-
-! '''Timeout'''
+! Timeout
 | Number of milliseconds to wait for the change (INFINITE to wait forever)
 |-
-! '''Return'''
+! Return
 | The state after the change (eg GPIO_LEVEL_HIGH) or GPIO_LEVEL_UNKNOWN on failure or timeout
 |-
@@ Line 268: / Line 682: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to schedule the callback for
 |-
-! '''Pin'''
+! Pin
 | The pin to schedule the state change for (eg GPIO_PIN_1)
 |-
-! '''Trigger'''
+! Trigger
 | The trigger event which will cause the function to be called (eg GPIO_TRIGGER_HIGH)
 |-
-! '''Timeout'''
+! Flags
+| The flags to control the event (eg GPIO_EVENT_FLAG_REPEAT)
+|-
+! Timeout
 | The number of milliseconds before the scheduled trigger expires (INFINITE to never expire)
 |-
-! '''Callback'''
+! Callback
 | The function to be called when the trigger occurs
 |-
-! '''Data'''
+! Data
 | A pointer to be pass to the function when the trigger occurs (Optional)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if the trigger was scheduled successfully or another error code on failure
 |-
-! '''Note'''
+! Note
 | The pin and trigger that caused the event will be passed to the callback function
 |-
@@ Line 301: / Line 718: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to cancel the callback for
 |-
-! '''Pin'''
+! Pin
 | The pin to cancel the state change for (eg GPIO_PIN_1)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if the callback was cancelled successfully or another error code on failure
 |-
@@ Line 319: / Line 736: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to set for
 |-
-! '''Pin'''
+! Pin
 | The pin to set the state for (eg GPIO_PIN_1)
 |-
-! '''Level'''
+! Level
 | The state to set the pin to (eg GPIO_LEVEL_HIGH)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed successfully or another error code on failure
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function GPIODeviceLevelGet(GPIO:PGPIODevice; Pin:LongWord):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the current level (state) of a pin on the specified GPIO device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! GPIO
+| The GPIO device to get from
+|-
+! Pin
+| The pin to get the level for (eg GPIO_PIN_1)
+|-
+! Return
+| The current level (eg GPIO_LEVEL_HIGH) or GPIO_LEVEL_UNKNOWN on failure
+|-
+! Note
+| This function is a synonym for GPIODeviceInputGet as in many cases the level can be read from a pin regardless of input or output mode. This may help to make code clearer or easier to understand in some cases.
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function GPIODeviceLevelSet(GPIO:PGPIODevice; Pin,Level:LongWord):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Set the level (state) of a pin on the specified GPIO device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! GPIO
+| The GPIO device to set for
+|-
+! Pin
+| The pin to set the level for (eg GPIO_PIN_1)
+|-
+! Level
+| The level to set the pin to (eg GPIO_LEVEL_HIGH)
+|-
+! Return
+| ERROR_SUCCESS if completed successfully or another error code on failure
+|-
+! Note
+| This function is a synonym for GPIODeviceOutputSet as in many cases the level can be set for a pin regardless of input or output mode. This may help to make code clearer or easier to understand in some cases.
 |-
 |}
@@ Line 340: / Line 802: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! GPIO
+| The GPIO device to get from
+|-
+! Pin
 | The pin to get the pull state for (eg GPIO_PIN_1)
 |-
-! '''Return'''
+! Return
 | The current pull state of the pin (eg GPIO_PULL_UP) or GPIO_PULL_UNKNOWN on failure
 |-
@@ Line 355: / Line 820: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to set for
 |-
-! '''Pin'''
+! Pin
 | The pin to change the pull state for (eg GPIO_PIN_1)
 |-
-! '''Mode'''
+! Mode
 | The pull state to set for the pin (eg GPIO_PULL_UP)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed successfully or another error code on failure
 |-
@@ Line 376: / Line 841: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! GPIO
+| The GPIO device to get from
+|-
+! Pin
 | The pin to get the function for (eg GPIO_PIN_1)
 |-
-! '''Return'''
+! Return
 | The current function of the pin (eg GPIO_FUNCTION_IN) or GPIO_FUNCTION_UNKNOWN on failure
 |-
+|}
 </div></div>
 <br />
@@ Line 390: / Line 859: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to set for
 |-
-! '''Pin'''
+! Pin
 | The pin to change the function for (eg GPIO_PIN_1)
 |-
-! '''Mode'''
+! Mode
 | The function to set for the pin (eg GPIO_FUNCTION_OUT)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed successfully or another error code on failure
 |-
@@ Line 406: / Line 875: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">function GPIODeviceProperties(GPIO:PGPIODevice; Properties:PGPIOProperties):LongWord;</pre>
+<pre style="border: 0; padding-bottom:0px;">function GPIODeviceProperties(GPIO:PGPIODevice; Properties:PGPIOProperties):LongWord; inline;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the properties for the specified GPIO device</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Properties'''
+! GPIO
+| The GPIO device to get properties from
+|-
+! Properties
+| Pointer to a TGPIOProperties structure to fill in
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
+|-
+! Note
+| Replaced by GPIODeviceGetProperties for consistency
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function GPIODeviceGetProperties(GPIO:PGPIODevice; Properties:PGPIOProperties):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the properties for the specified GPIO device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! GPIO
+| The GPIO device to get properties from
+|-
+! Properties
 | Pointer to a TGPIOProperties structure to fill in
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure
 |-
@@ Line 426: / Line 919: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Return'''
+! Return
 | Pointer to new GPIO entry or nil if GPIO could not be created
 |-
@@ Line 438: / Line 931: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Size'''
+! Size
 | Size in bytes to allocate for new GPIO (Including the GPIO entry)
 |-
-! '''Return'''
+! Return
 | Pointer to new GPIO entry or nil if GPIO could not be created
 |-
@@ Line 453: / Line 946: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to destroy
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure
 |-
@@ Line 468: / Line 961: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to register
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed or another error code on failure
 |-
@@ Line 483: / Line 976: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Return'''
+! GPIO
+| The GPIO device to deregister
+|-
+! Return
 | ERROR_SUCCESS if completed or another error code on failure
 |-
@@ Line 495: / Line 991: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIOId'''
+! GPIOId
 | The ID number of the GPIO device to find
 |-
-! '''Return'''
+! Return
 | Pointer to GPIO device entry or nil if not found
 |-
@@ Line 510: / Line 1,006: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Name'''
+! Name
 | The name of the GPIO to find (eg GPIO0)
 |-
-! '''Return'''
+! Return
 | Pointer to GPIO device entry or nil if not found
 |-
@@ Line 525: / Line 1,021: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Description'''
+! Description
 | The description of the GPIO to find (eg BCM2836 GPIO)
 |-
-! '''Return'''
+! Return
 | Pointer to GPIO device entry or nil if not found
 |-
@@ Line 540: / Line 1,036: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Callback'''
+! Callback
 | The callback function to call for each GPIO in the table
 |-
-! '''Data'''
+! Data
 | A private data pointer to pass to callback for each GPIO in the table
 |-
-! '''Note'''
+! Note
 | ERROR_SUCCESS if completed or another error code on failure
 |-
@@ Line 558: / Line 1,054: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''GPIO'''
+! GPIO
 | The GPIO device to notify changes for (Optional, pass nil for all GPIO devices)
 |-
-! '''Callback'''
+! Callback
 | The function to call when a notification event occurs
 |-
-! '''Data'''
+! Data
 | A private data pointer to pass to callback when a notification event occurs
 |-
-! '''Notification'''
+! Notification
 | The events to register for notification of (eg DEVICE_NOTIFICATION_REGISTER)
 |-
-! '''Flags'''
+! Flags
 | The flags to control the notification (eg NOTIFIER_FLAG_WORKER)
 |-
@@ Line 585: / Line 1,081: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 597: / Line 1,093: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! Pin
 | The pin to get the state for (eg GPIO_PIN_1)
 |-
-! '''Return'''
+! Return
 | The current state (eg GPIO_LEVEL_HIGH) or GPIO_LEVEL_UNKNOWN on failure
 |-
@@ Line 612: / Line 1,108: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! Pin
 | The pin to wait for the state to change (eg GPIO_PIN_1)
 |-
-! '''Trigger'''
+! Trigger
 | The trigger event to wait for (eg GPIO_TRIGGER_HIGH)
 |-
-! '''Timeout'''
+! Timeout
 | Number of milliseconds to wait for the change (INFINITE to wait forever)
 |-
-! '''Return'''
+! Return
 | The state after the change (eg GPIO_LEVEL_HIGH) or GPIO_LEVEL_UNKNOWN on failure or timeout
 |-
@@ Line 633: / Line 1,129: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! Pin
 | The pin to schedule the state change for (eg GPIO_PIN_1)
 |-
-! '''Trigger'''
+! Trigger
 | The trigger event which will cause the function to be called (eg GPIO_TRIGGER_HIGH)
 |-
-! '''Timeout'''
+! Timeout
 | The number of milliseconds before the scheduled trigger expires (INFINITE to never expire)
 |-
-! '''Callback'''
+! Callback
 | The function to be called when the trigger occurs
 |-
-! '''Data'''
+! Data
 | A pointer to be pass to the function when the trigger occurs (Optional)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if the trigger was scheduled successfully or another error code on failure
 |-
-! '''Note'''
+! Note
 | The pin and trigger that caused the event will be passed to the callback function
 |-
@@ Line 663: / Line 1,159: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! Pin
 | The pin to set the state for (eg GPIO_PIN_1)
 |-
-! '''Level'''
+! Level
 | The state to set the pin to (eg GPIO_LEVEL_HIGH)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed successfully or another error code on failure
 |-
@@ Line 681: / Line 1,177: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! Pin
 | The pin to get the pull state for (eg GPIO_PIN_1)
 |-
-! '''Return'''
+! Return
 | The current pull state of the pin (eg GPIO_PULL_UP) or GPIO_PULL_UNKNOWN on failure
 |-
@@ Line 696: / Line 1,192: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! Pin
 | The pin to change the pull state for (eg GPIO_PIN_1)
 |-
-! '''Mode'''
+! Mode
 | The pull state to set for the pin (eg GPIO_PULL_UP)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed successfully or another error code on failure
 |-
@@ Line 714: / Line 1,210: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! Pin
 | The pin to get the function for (eg GPIO_PIN_1)
 |-
-! '''Return'''
+! Return
 | The current function of the pin (eg GPIO_FUNCTION_IN) or GPIO_FUNCTION_UNKNOWN on failure
 |-
@@ Line 729: / Line 1,225: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Pin'''
+! Pin
 | The pin to change the function for (eg GPIO_PIN_1)
 |-
-! '''Mode'''
+! Mode
 | The function to set for the pin (eg GPIO_FUNCTION_OUT)
 |-
-! '''Return'''
+! Return
 | ERROR_SUCCESS if completed successfully or another error code on failure
 |-
@@ Line 745: / Line 1,241: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">function GPIOGetCount:LongWord; inline;</pre>
+<pre style="border: 0; padding-bottom:0px;">function GPIOGetCount:LongWord;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the current GPIO count</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 757: / Line 1,253: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">function GPIODeviceGetDefault:PGPIODevice; inline;</pre>
+<pre style="border: 0; padding-bottom:0px;">function GPIODeviceGetDefault:PGPIODevice;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the current default GPIO device</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 774: / Line 1,270: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 786: / Line 1,282: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function GPIOTypeToString(GPIOType:LongWord):String;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Convert a GPIO type value to a string</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function GPIOStateToString(GPIOState:LongWord):String;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Convert a GPIO state value to a string</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
 | None documented
 |-
@@ Line 798: / Line 1,318: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| Event must be registered by calling GPIODeviceRegisterEvent. Caller must hold the GPIO device lock.
+| Event must be registered by calling GPIODeviceRegisterEvent
+Caller must hold the GPIO device lock
 |-
 |}
@@ Line 810: / Line 1,331: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| Event must be deregistered first by calling GPIODeviceDeregisterEvent. Caller must hold the GPIO device lock.
+| Event must be deregistered first by calling GPIODeviceDeregisterEvent
+Caller must hold the GPIO device lock
 |-
 |}
@@ Line 822: / Line 1,344: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| Event must be created by calling GPIODeviceCreateEvent. Caller must hold the GPIO device lock.
+| Event must be created by calling GPIODeviceCreateEvent
+Caller must hold the GPIO device lock
 |-
 |}
@@ Line 834: / Line 1,357: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| Event must be destroyed by calling GPIODeviceDestroyEvent. Caller must hold the GPIO device lock.
+| Event must be destroyed by calling GPIODeviceDestroyEvent
+Caller must hold the GPIO device lock
 |-
 |}
@@ Line 846: / Line 1,370: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure GPIOLogInfo(GPIO:PGPIODevice; const AText:String); inline;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
 | None documented
 |-
@@ Line 853: / Line 1,389: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">procedure GPIOLogInfo(GPIO:PGPIODevice; const AText:String);</pre>
+<pre style="border: 0; padding-bottom:0px;">procedure GPIOLogWarn(GPIO:PGPIODevice; const AText:String); inline;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 865: / Line 1,401: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">procedure GPIOLogError(GPIO:PGPIODevice; const AText:String);</pre>
+<pre style="border: 0; padding-bottom:0px;">procedure GPIOLogError(GPIO:PGPIODevice; const AText:String); inline;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 877: / Line 1,413: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">procedure GPIOLogDebug(GPIO:PGPIODevice; const AText:String);</pre>
+<pre style="border: 0; padding-bottom:0px;">procedure GPIOLogDebug(GPIO:PGPIODevice; const AText:String); inline;</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 894: / Line 1,430: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 906: / Line 1,442: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 918: / Line 1,454: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 930: / Line 1,466: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-
@@ Line 942: / Line 1,478: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
 | None documented
 |-