Difference between revisions of "Unit Serial"

Latest revision as of 03:35, 15 December 2022

Serial devices represent a communication device that can be both read and written and has a set of common properties and capabilities. The underlying device may be an actual UART or it may be some other form of device such as a USB to Serial converter. As long as the device can implement the common capabilities then it can be accessed as a serial device without regard to the actual implementation.

Each serial device returns a set of properties that describe the capabilities of the device and includes a set of flags that indicate what features are supported.

Reads from and writes to serial devices are buffered so that varying data transfer rates can be accommodated and both reads and writes allow for non blocking so that a caller can avoid waiting for received data to be available or the device to be ready to transmit.

This unit also implements the serial logging device which can be configured via parameters in the GlobalConfig unit or from the command line.

Constants

Serial specific constants SERIAL_*

`SERIAL_NAME_PREFIX = 'Serial';`	Name prefix for Serial Devices

`SERIAL_LOGGING_DESCRIPTION = 'Serial Logging';`

`SERIAL_RECEIVE_DEPTH_DEFAULT = SIZE_2K;`	Default receive buffer size in bytes
`SERIAL_TRANSMIT_DEPTH_DEFAULT = SIZE_2K;`	Default transmit buffer size in bytes

`SERIAL_PUSH_TIMEOUT = 50;`	Timeout (Milliseconds) for Push RX/TX (Implementation specific)

Serial device type SERIAL_TYPE_*

`SERIAL_TYPE_NONE = 0;`
`SERIAL_TYPE_UART = 1;`
`SERIAL_TYPE_USB = 2;`

`SERIAL_TYPE_MAX = 2;`

Serial device state SERIAL_STATE_*

`SERIAL_STATE_CLOSED = 0;`
`SERIAL_STATE_CLOSING = 1;`
`SERIAL_STATE_OPENING = 2;`
`SERIAL_STATE_OPEN = 3;`

`SERIAL_STATE_MAX = 3;`

Serial device flag SERIAL_FLAG_*

`SERIAL_FLAG_NONE = $00000000;`
`SERIAL_FLAG_DATA_8BIT = $00000001;`	Device supports 8 data bits
`SERIAL_FLAG_DATA_7BIT = $00000002;`	Device supports 7 data bits
`SERIAL_FLAG_DATA_6BIT = $00000004;`	Device supports 6 data bits
`SERIAL_FLAG_DATA_5BIT = $00000008;`	Device supports 5 data bits
`SERIAL_FLAG_STOP_1BIT = $00000010;`	Device supports 1 stop bit
`SERIAL_FLAG_STOP_2BIT = $00000020;`	Device supports 2 stop bits
`SERIAL_FLAG_STOP_1BIT5 = $00000040;`	Device supports 1.5 stop bits
`SERIAL_FLAG_PARITY_ODD = $00000080;`	Device supports odd parity
`SERIAL_FLAG_PARITY_EVEN = $00000100;`	Device supports even parity
`SERIAL_FLAG_PARITY_MARK = $00000200;`	Device supports mark parity
`SERIAL_FLAG_PARITY_SPACE = $00000400;`	Device supports space parity
`SERIAL_FLAG_FLOW_RTS_CTS = $00000800;`	Device supports RTS/CTS flow control
`SERIAL_FLAG_FLOW_DSR_DTR = $00001000;`	Device supports DSR/DTR flow control
`SERIAL_FLAG_PUSH_RX = $00002000;`	Device requires pushed receive (Implementation specific)
`SERIAL_FLAG_PUSH_TX = $00004000;`	Device requires pushed transmit (Implementation specific)

Serial read flag SERIAL_READ_*

`SERIAL_READ_NONE = $00000000;`
`SERIAL_READ_NON_BLOCK = $00000001;`	Do not block when reading, if the buffer is empty return immediately
`SERIAL_READ_PEEK_BUFFER = $00000002;`	Return the number of bytes available in the receive buffer without reading them

Serial write flag SERIAL_WRITE_*

`SERIAL_WRITE_NONE = $00000000;`
`SERIAL_WRITE_NON_BLOCK = $00000001;`	Do not block when writing, if the buffer is full return immediately
`SERIAL_WRITE_PEEK_BUFFER = $00000002;`	Return the number of bytes free in the transmit buffer without writing anything

Serial wait directions SERIAL_WAIT_*

`SERIAL_WAIT_NONE = 0;`
`SERIAL_WAIT_RECEIVE = 1;`	Wait for data to be available in the receive buffer
`SERIAL_WAIT_TRANSMIT = 2;`	Wait for space to be available in the transmit buffer

Serial flush flag SERIAL_FLUSH_*

`SERIAL_FLUSH_NONE = $00000000;`
`SERIAL_FLUSH_RECEIVE = $00000001;`	Flush the receive buffer
`SERIAL_FLUSH_TRANSMIT = $00000002;`	Flush the transmit buffer

Serial status flag SERIAL_STATUS_*

`SERIAL_STATUS_NONE = $00000000;`
`SERIAL_STATUS_RTS = $00000001;`	RTS (Request to Send) is set (If applicable)
`SERIAL_STATUS_CTS = $00000002;`	CTS (Clear to Send) is set (If applicable)
`SERIAL_STATUS_DSR = $00000004;`	DSR (Data Set Ready) is set (If applicable)
`SERIAL_STATUS_DTR = $00000008;`	DTR (Data Terminal Ready) is set (If applicable)
`SERIAL_STATUS_RX_FULL = $00000010;`	Receive buffer is full
`SERIAL_STATUS_RX_EMPTY = $00000020;`	Receive buffer is empty
`SERIAL_STATUS_TX_FULL = $00000040;`	Transmit buffer is full
`SERIAL_STATUS_TX_EMPTY = $00000080;`	Transmit buffer is empty
`SERIAL_STATUS_BUSY = $00000100;`	Device is busy
`SERIAL_STATUS_BREAK_ERROR = $00000200;`	Break error reported
`SERIAL_STATUS_PARITY_ERROR = $00000400;`	Parity error reported
`SERIAL_STATUS_FRAMING_ERROR = $00000800;`	Framing error reported
`SERIAL_STATUS_OVERRUN_ERROR = $00001000;`	Overrun error reported
`SERIAL_STATUS_DCD = $00002000;`	DCD (Data Carrier Detect) is set (If applicable)
`SERIAL_STATUS_RI = $00004000;`	RI (Ring Indicator) is set (If applicable)

Serial logging SERIAL_LOG_*

`SERIAL_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG;`	Serial debugging messages
`SERIAL_LOG_LEVEL_INFO = LOG_LEVEL_INFO;`	Serial informational messages, such as a device being attached or detached
`SERIAL_LOG_LEVEL_WARN = LOG_LEVEL_WARN;`	Serial warning messages
`SERIAL_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR;`	Serial error messages
`SERIAL_LOG_LEVEL_NONE = LOG_LEVEL_NONE;`	No Serial messages

`SERIAL_LOGGING_LINE_END = Chr(13) + Chr(10);`	CR LF

Type definitions

Serial properties

PSerialProperties = ^TSerialProperties;

TSerialProperties = record

`Flags:LongWord;`	Device flags (eg SERIAL_FLAG_DATA_8BIT)
`MinRate:LongWord;`	Minimum supported baud rate (0 for any rate supported)
`MaxRate:LongWord;`	Maximum supported baud rate (0 for any rate supported)
`BaudRate:LongWord;`	Current baud rate setting
`DataBits:LongWord;`	Current data bits setting
`StopBits:LongWord;`	Current stop bits setting
`Parity:LongWord;`	Current parity setting
`FlowControl:LongWord;`	Current flow control setting
`ReceiveDepth:LongWord;`	Current receive depth setting
`TransmitDepth:LongWord;`	Current transmit depth setting

Serial buffer

PSerialBuffer = ^TSerialBuffer;

TSerialBuffer = record

`Wait:TEventHandle;`	Data ready/Buffer free event
`Start:LongWord;`	Index of first byte in buffer
`Count:LongWord;`	Number of bytes in buffer
`Size:LongWord;`	Size of buffer
`Data:Pointer;`	Buffered data

Serial enumeration callback

`TSerialEnumerate = function(Serial:PSerialDevice; Data:Pointer):LongWord;`

Serial notification callback

`TSerialNotification = function(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;`

Serial device open

`TSerialDeviceOpen = function(Serial:PSerialDevice; BaudRate,DataBits,StopBits,Parity,FlowControl,ReceiveDepth,TransmitDepth:LongWord):LongWord;`

Serial device close

`TSerialDeviceClose = function(Serial:PSerialDevice):LongWord;`

Serial device read

`TSerialDeviceRead = function(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;`

Serial device write

`TSerialDeviceWrite = function(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;`

Serial device wait

`TSerialDeviceWait = function(Serial:PSerialDevice; Direction,Timeout:LongWord; var Count:LongWord):LongWord;`

Serial device flush

`TSerialDeviceFlush = function(Serial:PSerialDevice;Flags:LongWord):LongWord;`

Serial device get status

`TSerialDeviceGetStatus = function(Serial:PSerialDevice):LongWord;`

Serial device set status

`TSerialDeviceSetStatus = function(Serial:PSerialDevice; Status:LongWord):LongWord;`

Serial device get properties

`TSerialDeviceGetProperties = function(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;`

Serial device set properties

`TSerialDeviceSetProperties = function(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;`

Serial device

PSerialDevice = ^TSerialDevice;

TSerialDevice = record

Device Properties
`Device:TDevice;`	The Device entry for this Serial
Serial Properties
`SerialId:LongWord;`	Unique Id of this Serial device in the Serial device table
`SerialState:LongWord;`	Serial state (eg SERIAL_STATE_OPEN)
`SerialStatus:LongWord;`	Serial status (eg SERIAL_STATUS_RX_FULL)(May not be real time status depending on the driver)
`DeviceOpen:TSerialDeviceOpen;`	A Device specific DeviceOpen method implementing the standard Serial device interface (Mandatory)
`DeviceClose:TSerialDeviceClose;`	A Device specific DeviceClose method implementing the standard Serial device interface (Mandatory)
`DeviceRead:TSerialDeviceRead;`	A Device specific DeviceRead method implementing the standard Serial device interface (Mandatory)
`DeviceWrite:TSerialDeviceWrite;`	A Device specific DeviceWrite method implementing the standard Serial device interface (Mandatory)
`DeviceWait:TSerialDeviceWait;`	A Device specific DeviceWait method implementing the standard Serial device interface (Or nil if the default method is suitable)
`DeviceFlush:TSerialDeviceFlush;`	A Device specific DeviceFlush method implementing the standard Serial device interface (Or nil if the default method is suitable)
`DeviceGetStatus:TSerialDeviceGetStatus;`	A Device specific DeviceGetStatus method implementing the standard Serial device interface (Or nil if the default method is suitable)
`DeviceSetStatus:TSerialDeviceSetStatus;`	A Device specific DeviceSetStatus method implementing the standard Serial device interface (Optional)
`DeviceGetProperties:TSerialDeviceGetProperties;`	A Device specific DeviceGetProperties method implementing the standard Serial device interface (Or nil if the default method is suitable)
`DeviceSetProperties:TSerialDeviceSetProperties;`	A Device specific DeviceSetProperties method implementing the standard Serial device interface (Or nil if the default method is suitable)
Driver Properties
`Lock:TMutexHandle;`	Device lock
`Receive:TSerialBuffer;`	Serial receive buffer
`Transmit:TSerialBuffer;`	Serial transmit buffer
`Properties:TSerialProperties;`	Device properties
Statistics Properties
`ReceiveCount:LongWord;`
`ReceiveErrors:LongWord;`
`ReceiveOverruns:LongWord;`
`TransmitCount:LongWord;`
`TransmitErrors:LongWord;`
`TransmitOverruns:LongWord;`
Internal Properties
`Prev:PSerialDevice;`	Previous entry in Serial table
`Next:PSerialDevice;`	Next entry in Serial table

Serial logging

PSerialLogging = ^TSerialLogging;

TSerialLogging = record

Logging Properties
`Logging:TLoggingDevice;`
Serial Properties
`Serial:PSerialDevice;`
`BaudRate:LongWord;`
`DataBits:LongWord;`
`StopBits:LongWord;`
`Parity:LongWord;`
`FlowControl:LongWord;`

Public variables

Serial logging

`SERIAL_DEFAULT_LOG_LEVEL:LongWord = SERIAL_LOG_LEVEL_DEBUG;`	Minimum level for Serial messages. Only messages with level greater than or equal to this will be printed.

`SERIAL_LOG_ENABLED:Boolean;`

Function declarations

Initialization functions

procedure SerialInit;

Description: Initialize the Serial unit and Serial device table

Note	None documented

Serial functions

function SerialDeviceOpen(Serial:PSerialDevice; BaudRate,DataBits,StopBits,Parity,FlowControl,ReceiveDepth,TransmitDepth:LongWord):LongWord;

Description: Open a Serial device ready for sending and receiving

Serial	The Serial device to open
BaudRate	Baud rate for the connection (eg 9600, 57600, 115200 etc)
DataBits	Size of the data (eg SERIAL_DATA_8BIT)
StopBits	Number of stop bits (eg SERIAL_STOP_1BIT)
Parity	Parity type for the data (eg SERIAL_PARITY_NONE)
FlowControl	Flow control for the connection (eg SERIAL_FLOW_NONE)
ReceiveDepth	Size of the receive buffer (0 = Default size)
TransmitDepth	Size of the transmit buffer (0 = Default size)
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceClose(Serial:PSerialDevice):LongWord;

Description: Close a Serial device and terminate sending and receiving

Serial	The Serial device to close
Note	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceRead(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;

Description: Read data from a Serial device

Serial	The Serial device to read from
Buffer	Pointer to a buffer to receive the data
Size	The size of the buffer
Flags	The flags to control reading (eg SERIAL_READ_NON_BLOCK)
Count	The number of bytes read on return
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceWrite(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;

Description: Write data to a Serial device

Serial	The Serial device to write to
Buffer	Pointer to a buffer of data to transmit
Size	The size of the buffer
Flags	The flags to control writing (eg SERIAL_WRITE_NON_BLOCK)
Count	The number of bytes written on return
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceWait(Serial:PSerialDevice; Direction,Timeout:LongWord; var Count:LongWord):LongWord;

Description: Wait for data to be available in the receive or transmit buffers of a Serial device

Serial	The Serial device to wait for
Direction	The direction of data to wait for (eg SERIAL_WAIT_RECEIVE)
Timeout	The number of milliseconds to wait for data (INFINITE to wait forever)
Count	The number of bytes available on return
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceFlush(Serial:PSerialDevice; Flags:LongWord):LongWord;

Description: Discard the contents of the receive and/or transmit buffers of a Serial device

Serial	The Serial device to flush
Flags	The flags to indicate what to flush (eg SERIAL_FLUSH_RECEIVE)
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceStatus(Serial:PSerialDevice):LongWord; inline;

Description: Get the current line status of a Serial device

Serial	The Serial device to get the status from
Return	A set of flags containing the device status (eg SERIAL_STATUS_RTS)

function SerialDeviceGetStatus(Serial:PSerialDevice):LongWord;

Description: Get the current line status of a Serial device

Serial	The Serial device to get the status from
Return	A set of flags containing the device status (eg SERIAL_STATUS_RTS)

function SerialDeviceSetStatus(Serial:PSerialDevice; Status:LongWord):LongWord;

Description: Set the current line status of a Serial device

Serial	The Serial device to set the status for
Status	The device status flags to be set (eg SERIAL_STATUS_RTS)
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Not all SERIAL_STATUS_* flags can be set, the device may ignore invalid values. Not all serial devices support set status, returns ERROR_CALL_NOT_IMPLEMENTED if not supported.

function SerialDeviceProperties(Serial:PSerialDevice; Properties:PSerialProperties):LongWord; inline;

Description: Get the properties for the specified Serial device

Serial	The Serial device to get properties from
Properties	Pointer to a PSerialProperties structure to fill in
Return	ERROR_SUCCESS if completed or another error code on failure
Note	Replaced by SerialDeviceGetProperties for consistency

function SerialDeviceGetProperties(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;

Description: Get the properties for the specified Serial device

Serial	The Serial device to get properties from
Properties	Pointer to a PSerialProperties structure to fill in
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceSetProperties(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;

Description: Set the properties for the specified Serial device

Serial	The Serial device to set properties for
Properties	Pointer to a PSerialProperties structure to use
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceCreate:PSerialDevice;

Description: Create a new Serial entry

Return	Pointer to new Serial entry or nil if Serial could not be created

function SerialDeviceCreateEx(Size:LongWord):PSerialDevice;

Description: Create a new Serial entry

Size	Size in bytes to allocate for new Serial (Including the Serial entry)
Return	Pointer to new Serial entry or nil if Serial could not be created

function SerialDeviceDestroy(Serial:PSerialDevice):LongWord;

Description: Destroy an existing Serial entry

Serial	The serial device to destroy
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceRegister(Serial:PSerialDevice):LongWord;

Description: Register a new Serial in the Serial table

Serial	The serial device to register
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceDeregister(Serial:PSerialDevice):LongWord;

Description: Deregister a Serial from the Serial table

Serial	The serial device to deregister
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceFind(SerialId:LongWord):PSerialDevice;

Description: Find a serial device by Id in the serial table

SerialId	The Id number of the serial to find
Return	Pointer to serial device entry or nil if not found

function SerialDeviceFindByName(const Name:String):PSerialDevice; inline;

Description: Find a serial device by name in the serial table

Name	The name of the serial to find (eg Serial0)
Return	Pointer to serial device entry or nil if not found

function SerialDeviceFindByDescription(const Description:String):PSerialDevice; inline;

Description: Find a serial device by description in the serial table

Description	The description of the serial to find (eg BCM2836 PL011 UART)
Return	Pointer to serial device entry or nil if not found

function SerialDeviceEnumerate(Callback:TSerialEnumerate; Data:Pointer):LongWord;

Description: Enumerate all serial devices in the serial table

Callback	The callback function to call for each serial in the table
Data	A private data pointer to pass to callback for each serial in the table
Return	ERROR_SUCCESS if completed or another error code on failure

function SerialDeviceNotification(Serial:PSerialDevice; Callback:TSerialNotification; Data:Pointer; Notification,Flags:LongWord):LongWord;

Description: Register a notification for serial device changes

Serial	The serial device to notify changes for (Optional, pass nil for all serial devices)
Callback	The function to call when a notification event occurs
Data	A private data pointer to pass to callback when a notification event occurs
Notification	The events to register for notification of (eg DEVICE_NOTIFICATION_REGISTER)
Flags	The flags to control the notification (eg NOTIFIER_FLAG_WORKER)

Serial logging functions

function SerialLoggingStart(Logging:PLoggingDevice):LongWord;

Description: Implementation of LoggingDeviceStart API for Serial Logging

Note	Not intended to be called directly by applications, use LoggingDeviceStart instead.

function SerialLoggingStop(Logging:PLoggingDevice):LongWord;

Description: Implementation of LoggingDeviceStop API for Serial Logging

Note	Not intended to be called directly by applications, use LoggingDeviceStop instead.

function SerialLoggingOutput(Logging:PLoggingDevice; const Data:String):LongWord;

Description: Implementation of LoggingDeviceOutput API for Serial Logging

Note	Not intended to be called directly by applications, use LoggingDeviceOutput instead.

function SerialLoggingSetTarget(Logging:PLoggingDevice; const Target:String):LongWord;

Description: Implementation of LoggingDeviceSetTarget API for Serial Logging

Note	Not intended to be called directly by applications, use LoggingDeviceSetTarget instead.

RTL text IO functions

function SysTextIOReadChar(var ACh:Char; AUserData:Pointer):Boolean;

Description: Handler for platform TextIOReadChar function

Note	Not intended to be called directly by applications

function SysTextIOWriteChar(ACh:Char; AUserData:Pointer):Boolean;

Description: Handler for platform TextIOWriteChar function

Note	Not intended to be called directly by applications

function SysTextIOWriteBuffer(ABuffer:PChar; ACount:LongInt; AUserData:Pointer):LongInt;

Description: Handler for platform TextIOWriteBuffer function

Note	Not intended to be called directly by applications

RTL serial functions

function SysSerialAvailable:Boolean;

Description: Check if a Serial device is available

Note	None documented

function SysSerialOpen(BaudRate,DataBits,StopBits,Parity,FlowControl,ReceiveDepth,TransmitDepth:LongWord):LongWord;

Description: Open the default Serial device ready for sending and receiving

BaudRate	Baud rate for the connection (eg 9600, 57600, 115200 etc)
DataBits	Size of the data (eg SERIAL_DATA_8BIT)
StopBits	Number of stop bits (eg SERIAL_STOP_1BIT)
Parity	Parity type for the data (eg SERIAL_PARITY_NONE)
FlowControl	Flow control for the connection (eg SERIAL_FLOW_NONE)
ReceiveDepth	Size of the receive buffer (0 = Default size)
TransmitDepth	Size of the transmit buffer (0 = Default size)

function SysSerialClose:LongWord;

Description: Close the default Serial device and terminate sending and receiving

Note	None documented

function SysSerialRead(Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;

Description: Read data from the default Serial device

Buffer	Pointer to a buffer to receive the data
Size	The size of the buffer
Count	The number of bytes read on return

function SysSerialWrite(Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;

Description: Write data to the default Serial device

Buffer	Pointer to a buffer of data to transmit
Size	The size of the buffer
Count	The number of bytes written on return

Serial helper functions

function SerialGetCount:LongWord;

Description: Get the current Serial count

Note	None documented

function SerialDeviceGetDefault:PSerialDevice;

Description: Get the current default Serial device

Note	None documented

function SerialDeviceSetDefault(Serial:PSerialDevice):LongWord;

Description: Set the current default Serial device

Note	None documented

function SerialDeviceCheck(Serial:PSerialDevice):PSerialDevice;

Description: Check if the supplied Serial is in the Serial table

Note	None documented

function SerialTypeToString(SerialType:LongWord):String;

Description: Convert a Serial type value to a string

Note	None documented

function SerialStateToString(SerialState:LongWord):String;

Description: Convert a Serial state value to a string

Note	None documented

function SerialDeviceRedirectInput(Serial:PSerialDevice):Boolean;

Description: Redirect standard input to the serial device specified by Serial

Serial	The serial device to redirect input to (or nil to stop redirection)
Return	True if completed successfully or False if an error occurred
Note	Redirects the input of the text file Input which also redirects the input of Read, ReadLn and the standard C library.

function SerialDeviceRedirectOutput(Serial:PSerialDevice):Boolean;

Description: Redirect standard output to the serial device specified by Serial

Serial	The serial device to redirect output to (or nil to stop redirection)
Return	True if completed successfully or False if an error occurred
Note	Redirects the output of the text files Output, ErrOutput, StdOut and StdErr which also redirects the output of Write, WriteLn and the standard C library.

function SerialBufferReadStart(Buffer:PSerialBuffer; var Available:LongWord):Pointer;

Description: Return a pointer to the next read from the buffer and the number of bytes that can be read

Note	Caller must hold the lock on the serial device which owns the buffer

function SerialBufferReadComplete(Buffer:PSerialBuffer; Removed:LongWord):Boolean;

Description: Update the buffer to reflect the number of bytes removed when reading

Note	Caller must hold the lock on the serial device which owns the buffer

function SerialBufferWriteStart(Buffer:PSerialBuffer; var Available:LongWord):Pointer;

Description: Return a pointer to the next write to the buffer and the number of bytes that can be written

Note	Caller must hold the lock on the serial device which owns the buffer

function SerialBufferWriteComplete(Buffer:PSerialBuffer; Added:LongWord):Boolean;

Description: Update the buffer to reflect the number of bytes added when writing

Note	Caller must hold the lock on the serial device which owns the buffer

procedure SerialLog(Level:LongWord; Serial:PSerialDevice; const AText:String);

Description: To be documented

Note	None documented

procedure SerialLogInfo(Serial:PSerialDevice; const AText:String); inline;

Description: To be documented

Note	None documented

procedure SerialLogWarn(Serial:PSerialDevice; const AText:String); inline;

Description: To be documented

Note	None documented

procedure SerialLogError(Serial:PSerialDevice; const AText:String); inline;

Description: To be documented

Note	None documented

procedure SerialLogDebug(Serial:PSerialDevice; const AText:String); inline;

Description: To be documented

Note	None documented

function SerialDataBitsToString(Parity:LongWord):String;

Description: To be documented

Note	None documented

function SerialStopBitsToString(Parity:LongWord):String;

Description: To be documented

Note	None documented

function SerialParityToString(Parity:LongWord):String;

Description: To be documented

Note	None documented

function SerialFlowControlToString(Flow:LongWord):String;

Description: To be documented

Note	None documented

Serial logging helper functions

function SerialLoggingDeviceAdd(Serial:PSerialDevice):LongWord;

Description: Add a new serial logging device on receipt of a device register notification

Note	None documented

function SerialLoggingDeviceRemove(Serial:PSerialDevice):LongWord;

Description: Remove a serial logging device on receipt of a device deregister notification

Note	None documented

function SerialLoggingDeviceParameters(Serial:PSerialDevice; const Parameters:String; var BaudRate,Parity,DataBits,StopBits:LongWord):LongWord;

Description: Break down the serial parameters value into component parts of baud rate, parity, data bits and stop bits

Note	The parameters must be in the form 'BaudRate,Parity,DataBits,StopBits' (eg '115200,N,8,1')

function SerialLoggingFirstWord(var Value:String;const Delimiter:String):String;

Description: To be documented

Note	None documented

function SerialLoggingDeviceEnum(Serial:PSerialDevice; Data:Pointer):LongWord;

Description: Enumeration callback for serial logging initialization

Note	Not intended to be called directly by applications

function SerialLoggingDeviceNotify(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;

Description: Notification callback for serial logging device creation or remove

Note	Not intended to be called directly by applications

Return to Unit Reference

Difference between revisions of "Unit Serial"

Latest revision as of 03:35, 15 December 2022

Contents

Description

Constants

Type definitions

Public variables

Function declarations

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 5: / Line 5: @@
 ----
-Serial devices represent a communication device that can be both read and written and has a set of common properties and capabilities. The underlying device may be an actual UART or it may be
+'''Ultibo Serial Interface unit'''
-some other form of device such as a USB to Serial converter. As long as the device can implement the common capabilities then it can be accessed as a serial device without regard to the actual
+Serial devices represent a communication device that can be both read and written and has a set of common properties and capabilities. The underlying device may be an actual UART or it may be some other form of device such as a USB to Serial converter. As long as the device can implement the common capabilities then it can be accessed as a serial device without regard to the actual
 implementation.
 Each serial device returns a set of properties that describe the capabilities of the device and includes a set of flags that indicate what features are supported.
-Reads from and writes to serial devices are buffered so that varying data transfer rates can be accomodated and both reads and writes allow for non blocking so that a caller can avoid waiting
+Reads from and writes to serial devices are buffered so that varying data transfer rates can be accommodated and both reads and writes allow for non blocking so that a caller can avoid waiting for received data to be available or the device to be ready to transmit.
-for received data to be available or the device to be ready to transmit.
 This unit also implements the serial logging device which can be configured via parameters in the GlobalConfig unit or from the command line.
@@ Line 19: / Line 19: @@
 ----
-''To be documented''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''Serial specific constants''' <code> SERIAL_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>SERIAL_NAME_PREFIX = 'Serial';</code>
+| Name prefix for Serial Devices
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>SERIAL_LOGGING_DESCRIPTION = 'Serial Logging';</code>
+| &nbsp;
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>SERIAL_RECEIVE_DEPTH_DEFAULT = SIZE_2K;</code>
+| Default receive buffer size in bytes
+|-
+| <code>SERIAL_TRANSMIT_DEPTH_DEFAULT = SIZE_2K;</code>
+| Default transmit buffer size in bytes
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>SERIAL_PUSH_TIMEOUT = 50;</code>
+| Timeout (Milliseconds) for Push RX/TX (Implementation specific)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''Serial device type''' <code> SERIAL_TYPE_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>SERIAL_TYPE_NONE = 0;</code>
+| style="width: 50%;"|&nbsp;
+|-
+| <code>SERIAL_TYPE_UART = 1;</code>
+| &nbsp;
+|-
+| <code>SERIAL_TYPE_USB = 2;</code>
+| &nbsp;
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>SERIAL_TYPE_MAX = 2;</code>
+| &nbsp;
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''Serial device state''' <code> SERIAL_STATE_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>SERIAL_STATE_CLOSED = 0;</code>
+| style="width: 50%;"|&nbsp;
+|-
+| <code>SERIAL_STATE_CLOSING = 1;</code>
+| &nbsp;
+|-
+| <code>SERIAL_STATE_OPENING = 2;</code>
+| &nbsp;
+|-
+| <code>SERIAL_STATE_OPEN = 3;</code>
+| &nbsp;
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>SERIAL_STATE_MAX = 3;</code>
+| &nbsp;
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''Serial device flag''' <code> SERIAL_FLAG_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>SERIAL_FLAG_NONE = $00000000;</code>
+| &nbsp;
+|-
+| <code>SERIAL_FLAG_DATA_8BIT = $00000001;</code>
+| Device supports 8 data bits
+|-
+| <code>SERIAL_FLAG_DATA_7BIT = $00000002;</code>
+| Device supports 7 data bits
+|-
+| <code>SERIAL_FLAG_DATA_6BIT = $00000004;</code>
+| Device supports 6 data bits
+|-
+| <code>SERIAL_FLAG_DATA_5BIT = $00000008;</code>
+| Device supports 5 data bits
+|-
+| <code>SERIAL_FLAG_STOP_1BIT = $00000010;</code>
+| Device supports 1 stop bit
+|-
+| <code>SERIAL_FLAG_STOP_2BIT = $00000020;</code>
+| Device supports 2 stop bits
+|-
+| <code>SERIAL_FLAG_STOP_1BIT5 = $00000040;</code>
+| Device supports 1.5 stop bits
+|-
+| <code>SERIAL_FLAG_PARITY_ODD = $00000080;</code>
+| Device supports odd parity
+|-
+| <code>SERIAL_FLAG_PARITY_EVEN = $00000100;</code>
+| Device supports even parity
+|-
+| <code>SERIAL_FLAG_PARITY_MARK = $00000200;</code>
+| Device supports mark parity
+|-
+| <code>SERIAL_FLAG_PARITY_SPACE = $00000400;</code>
+| Device supports space parity
+|-
+| <code>SERIAL_FLAG_FLOW_RTS_CTS = $00000800;</code>
+| Device supports RTS/CTS flow control
+|-
+| <code>SERIAL_FLAG_FLOW_DSR_DTR = $00001000;</code>
+| Device supports DSR/DTR flow control
+|-
+| <code>SERIAL_FLAG_PUSH_RX = $00002000;</code>
+| Device requires pushed receive (Implementation specific)
+|-
+| <code>SERIAL_FLAG_PUSH_TX = $00004000;</code>
+| Device requires pushed transmit (Implementation specific)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''Serial read flag''' <code> SERIAL_READ_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>SERIAL_READ_NONE = $00000000;</code>
+| &nbsp;
+|-
+| <code>SERIAL_READ_NON_BLOCK = $00000001;</code>
+| Do not block when reading, if the buffer is empty return immediately
+|-
+| <code>SERIAL_READ_PEEK_BUFFER = $00000002;</code>
+| Return the number of bytes available in the receive buffer without reading them
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''Serial write flag''' <code> SERIAL_WRITE_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>SERIAL_WRITE_NONE = $00000000;</code>
+| &nbsp;
+|-
+| <code>SERIAL_WRITE_NON_BLOCK = $00000001;</code>
+| Do not block when writing, if the buffer is full return immediately
+|-
+| <code>SERIAL_WRITE_PEEK_BUFFER = $00000002;</code>
+| Return the number of bytes free in the transmit buffer without writing anything
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''Serial wait directions''' <code> SERIAL_WAIT_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>SERIAL_WAIT_NONE = 0;</code>
+| &nbsp;
+|-
+| <code>SERIAL_WAIT_RECEIVE = 1;</code>
+| Wait for data to be available in the receive buffer
+|-
+| <code>SERIAL_WAIT_TRANSMIT = 2;</code>
+| Wait for space to be available in the transmit buffer
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''Serial flush flag''' <code> SERIAL_FLUSH_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>SERIAL_FLUSH_NONE = $00000000;</code>
+| &nbsp;
+|-
+| <code>SERIAL_FLUSH_RECEIVE  = $00000001;</code>
+| Flush the receive buffer
+|-
+| <code>SERIAL_FLUSH_TRANSMIT = $00000002;</code>
+| Flush the transmit buffer
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''Serial status flag''' <code> SERIAL_STATUS_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>SERIAL_STATUS_NONE = $00000000;</code>
+| &nbsp;
+|-
+| <code>SERIAL_STATUS_RTS = $00000001;</code>
+| RTS (Request to Send) is set (If applicable)
+|-
+| <code>SERIAL_STATUS_CTS = $00000002;</code>
+| CTS (Clear to Send) is set (If applicable)
+|-
+| <code>SERIAL_STATUS_DSR = $00000004;</code>
+| DSR (Data Set Ready) is set (If applicable)
+|-
+| <code>SERIAL_STATUS_DTR = $00000008;</code>
+| DTR (Data Terminal Ready) is set (If applicable)
+|-
+| <code>SERIAL_STATUS_RX_FULL = $00000010;</code>
+| Receive buffer is full
+|-
+| <code>SERIAL_STATUS_RX_EMPTY = $00000020;</code>
+| Receive buffer is empty
+|-
+| <code>SERIAL_STATUS_TX_FULL = $00000040;</code>
+| Transmit buffer is full
+|-
+| <code>SERIAL_STATUS_TX_EMPTY = $00000080;</code>
+| Transmit buffer is empty
+|-
+| <code>SERIAL_STATUS_BUSY = $00000100;</code>
+| Device is busy
+|-
+| <code>SERIAL_STATUS_BREAK_ERROR = $00000200;</code>
+| Break error reported
+|-
+| <code>SERIAL_STATUS_PARITY_ERROR = $00000400;</code>
+| Parity error reported
+|-
+| <code>SERIAL_STATUS_FRAMING_ERROR = $00000800;</code>
+| Framing error reported
+|-
+| <code>SERIAL_STATUS_OVERRUN_ERROR = $00001000;</code>
+| Overrun error reported
+|-
+| <code>SERIAL_STATUS_DCD = $00002000;</code>
+| DCD (Data Carrier Detect) is set (If applicable)
+|-
+| <code>SERIAL_STATUS_RI = $00004000;</code>
+| RI (Ring Indicator) is set (If applicable)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 20px; padding-bottom: 15px;">
+<div style="font-size: 14px; padding-left: 12px;">'''Serial logging''' <code> SERIAL_LOG_* </code></div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>SERIAL_LOG_LEVEL_DEBUG = LOG_LEVEL_DEBUG;</code>
+| Serial debugging messages
+|-
+| <code>SERIAL_LOG_LEVEL_INFO = LOG_LEVEL_INFO;</code>
+| Serial informational messages, such as a device being attached or detached
+|-
+| <code>SERIAL_LOG_LEVEL_WARN = LOG_LEVEL_WARN;</code>
+| Serial warning messages
+|-
+| <code>SERIAL_LOG_LEVEL_ERROR = LOG_LEVEL_ERROR;</code>
+| Serial error messages
+|-
+| <code>SERIAL_LOG_LEVEL_NONE = LOG_LEVEL_NONE;</code>
+| No Serial messages
+|-
+|colspan="2"|&nbsp;
+|-
+| <code>SERIAL_LOGGING_LINE_END = Chr(13) + Chr(10);</code>
+| CR LF
+|-
+|}
+</div></div>
+<br />
 === Type definitions ===
 ----
-''To be documented''
+'''Serial properties'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PSerialProperties = ^TSerialProperties;</code>
+<code>TSerialProperties = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>Flags:LongWord;</code>
+| Device flags (eg SERIAL_FLAG_DATA_8BIT)
+|-
+| <code>MinRate:LongWord;</code>
+| Minimum supported baud rate (0 for any rate supported)
+|-
+| <code>MaxRate:LongWord;</code>
+| Maximum supported baud rate (0 for any rate supported)
+|-
+| <code>BaudRate:LongWord;</code>
+| Current baud rate setting
+|-
+| <code>DataBits:LongWord;</code>
+| Current data bits setting
+|-
+| <code>StopBits:LongWord;</code>
+| Current stop bits setting
+|-
+| <code>Parity:LongWord;</code>
+| Current parity setting
+|-
+| <code>FlowControl:LongWord;</code>
+| Current flow control setting
+|-
+| <code>ReceiveDepth:LongWord;</code>
+| Current receive depth setting
+|-
+| <code>TransmitDepth:LongWord;</code>
+| Current transmit depth setting
+|-
+|}
+</div></div>
+'''Serial buffer'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PSerialBuffer = ^TSerialBuffer;</code>
+<code>TSerialBuffer = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+| <code>Wait:TEventHandle;</code>
+| Data ready/Buffer free event
+|-
+| <code>Start:LongWord;</code>
+| Index of first byte in buffer
+|-
+| <code>Count:LongWord;</code>
+| Number of bytes in buffer
+|-
+| <code>Size:LongWord;</code>
+| Size of buffer
+|-
+| <code>Data:Pointer;</code>
+| Buffered data
+|-
+|}
+</div></div>
+'''Serial enumeration callback'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialEnumerate = function(Serial:PSerialDevice; Data:Pointer):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial notification callback'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialNotification = function(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device open'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialDeviceOpen = function(Serial:PSerialDevice; BaudRate,DataBits,StopBits,Parity,FlowControl,ReceiveDepth,TransmitDepth:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device close'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialDeviceClose = function(Serial:PSerialDevice):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device read'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialDeviceRead = function(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device write'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialDeviceWrite = function(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device wait'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialDeviceWait = function(Serial:PSerialDevice; Direction,Timeout:LongWord; var Count:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device flush'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialDeviceFlush = function(Serial:PSerialDevice;Flags:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device get status'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialDeviceGetStatus = function(Serial:PSerialDevice):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device set status'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialDeviceSetStatus = function(Serial:PSerialDevice; Status:LongWord):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device get properties'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialDeviceGetProperties = function(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device set properties'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>TSerialDeviceSetProperties = function(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;</code>
+| style="width: 40%;"|
+|-
+|}
+'''Serial device'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PSerialDevice = ^TSerialDevice;</code>
+<code>TSerialDevice = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|''Device Properties''
+|-
+| <code>Device:TDevice;</code>
+| The Device entry for this Serial
+|-
+|colspan="2"|''Serial Properties''
+|-
+| <code>SerialId:LongWord;</code>
+| Unique Id of this Serial device in the Serial device table
+|-
+| <code>SerialState:LongWord;</code>
+| Serial state (eg SERIAL_STATE_OPEN)
+|-
+| <code>SerialStatus:LongWord;</code>
+| Serial status (eg SERIAL_STATUS_RX_FULL)(May not be real time status depending on the driver)
+|-
+| <code>DeviceOpen:TSerialDeviceOpen;</code>
+| A Device specific DeviceOpen method implementing the standard Serial device interface (Mandatory)
+|-
+| <code>DeviceClose:TSerialDeviceClose;</code>
+| A Device specific DeviceClose method implementing the standard Serial device interface (Mandatory)
+|-
+| <code>DeviceRead:TSerialDeviceRead;</code>
+| A Device specific DeviceRead method implementing the standard Serial device interface (Mandatory)
+|-
+| <code>DeviceWrite:TSerialDeviceWrite;</code>
+| A Device specific DeviceWrite method implementing the standard Serial device interface (Mandatory)
+|-
+| <code>DeviceWait:TSerialDeviceWait;</code>
+| A Device specific DeviceWait method implementing the standard Serial device interface (Or nil if the default method is suitable)
+|-
+| <code>DeviceFlush:TSerialDeviceFlush;</code>
+| A Device specific DeviceFlush method implementing the standard Serial device interface (Or nil if the default method is suitable)
+|-
+| <code>DeviceGetStatus:TSerialDeviceGetStatus;</code>
+| A Device specific DeviceGetStatus method implementing the standard Serial device interface (Or nil if the default method is suitable)
+|-
+| <code>DeviceSetStatus:TSerialDeviceSetStatus;</code>
+| A Device specific DeviceSetStatus method implementing the standard Serial device interface (Optional)
+|-
+| <code>DeviceGetProperties:TSerialDeviceGetProperties;</code>
+| A Device specific DeviceGetProperties method implementing the standard Serial device interface (Or nil if the default method is suitable)
+|-
+| <code>DeviceSetProperties:TSerialDeviceSetProperties;</code>
+| A Device specific DeviceSetProperties method implementing the standard Serial device interface (Or nil if the default method is suitable)
+|-
+|colspan="2"|''Driver Properties''
+|-
+| <code>Lock:TMutexHandle;</code>
+| Device lock
+|-
+| <code>Receive:TSerialBuffer;</code>
+| Serial receive buffer
+|-
+| <code>Transmit:TSerialBuffer;</code>
+| Serial transmit buffer
+|-
+| <code>Properties:TSerialProperties;</code>
+| Device properties
+|-
+|colspan="2"|''Statistics Properties''
+|-
+| <code>ReceiveCount:LongWord;</code>
+| &nbsp;
+|-
+| <code>ReceiveErrors:LongWord;</code>
+| &nbsp;
+|-
+| <code>ReceiveOverruns:LongWord;</code>
+| &nbsp;
+|-
+| <code>TransmitCount:LongWord;</code>
+| &nbsp;
+|-
+| <code>TransmitErrors:LongWord;</code>
+| &nbsp;
+|-
+| <code>TransmitOverruns:LongWord;</code>
+| &nbsp;
+|-
+|colspan="2"|''Internal Properties''
+|-
+| <code>Prev:PSerialDevice;</code>
+| Previous entry in Serial table
+|-
+| <code>Next:PSerialDevice;</code>
+| Next entry in Serial table
+|-
+|}
+</div></div>
+'''Serial logging'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial;">
+<code>PSerialLogging = ^TSerialLogging;</code>
+<code>TSerialLogging = record</code>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+|colspan="2"|''Logging Properties''
+|-
+| <code>Logging:TLoggingDevice;</code>
+| style="width: 50%;"|&nbsp;
+|-
+|colspan="2"|''Serial Properties''
+|-
+| <code>Serial:PSerialDevice;</code>
+| &nbsp;
+|-
+| <code>BaudRate:LongWord;</code>
+| &nbsp;
+|-
+| <code>DataBits:LongWord;</code>
+| &nbsp;
+|-
+| <code>StopBits:LongWord;</code>
+| &nbsp;
+|-
+| <code>Parity:LongWord;</code>
+| &nbsp;
+|-
+| <code>FlowControl:LongWord;</code>
+| &nbsp;
+|-
+|}
+</div></div>
+<br />
 === Public variables ===
 ----
-''To be documented''
+'''Serial logging'''
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>SERIAL_DEFAULT_LOG_LEVEL:LongWord = SERIAL_LOG_LEVEL_DEBUG;</code>
+| style="width: 40%;"|Minimum level for Serial messages. Only messages with level greater than or equal to this will be printed.
+|-
+|}
+{| class="wikitable" style="font-size: 14px; text-align: left; width: 100%; height: 50px;"
+|-
+| <code>SERIAL_LOG_ENABLED:Boolean;</code>
+| style="width: 40%;"|
+|-
+|}
+<br />
 === Function declarations ===
@@ Line 43: / Line 656: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| To be documented
+| None documented
 |-
 |}
@@ Line 54: / Line 667: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialDeviceOpen(Serial:PSerialDevice; BaudRate,DataBits,StopBits,Parity,FlowControl,ReceiveDepth,TransmitDepth:LongWord):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Open a Serial device ready for sending and receiving</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Serial
-| To be documented
+| The Serial device to open
+|-
+! BaudRate
+| Baud rate for the connection (eg 9600, 57600, 115200 etc)
+|-
+! DataBits
+| Size of the data (eg SERIAL_DATA_8BIT)
+|-
+! StopBits
+| Number of stop bits (eg SERIAL_STOP_1BIT)
+|-
+! Parity
+| Parity type for the data (eg SERIAL_PARITY_NONE)
+|-
+! FlowControl
+| Flow control for the connection (eg SERIAL_FLOW_NONE)
+|-
+! ReceiveDepth
+| Size of the receive buffer (0 = Default size)
+|-
+! TransmitDepth
+| Size of the transmit buffer (0 = Default size)
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
 |-
 |}
@@ Line 66: / Line 703: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialDeviceClose(Serial:PSerialDevice):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Close a Serial device and terminate sending and receiving</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Serial
-| To be documented
+| The Serial device to close
+|-
+! Note
+| ERROR_SUCCESS if completed or another error code on failure
 |-
 |}
@@ Line 78: / Line 718: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialDeviceRead(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Read data from a Serial device</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Serial
-| To be documented
+| The Serial device to read from
+|-
+! Buffer
+| Pointer to a buffer to receive the data
+|-
+! Size
+| The size of the buffer
+|-
+! Flags
+| The flags to control reading (eg SERIAL_READ_NON_BLOCK)
+|-
+! Count
+| The number of bytes read on return
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
 |-
 |}
@@ Line 90: / Line 745: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialDeviceWrite(Serial:PSerialDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Write data to a Serial device</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Serial
-| To be documented
+| The Serial device to write to
+|-
+! Buffer
+| Pointer to a buffer of data to transmit
+|-
+! Size
+| The size of the buffer
+|-
+! Flags
+| The flags to control writing (eg SERIAL_WRITE_NON_BLOCK)
+|-
+! Count
+| The number of bytes written on return
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
 |-
 |}
@@ Line 101: / Line 771: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">function SerialDeviceStatus(Serial:PSerialDevice):LongWord;</pre>
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceWait(Serial:PSerialDevice; Direction,Timeout:LongWord; var Count:LongWord):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Wait for data to be available in the receive or transmit buffers of a Serial device</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Serial
-| To be documented
+| The Serial device to wait for
+|-
+! Direction
+| The direction of data to wait for (eg SERIAL_WAIT_RECEIVE)
+|-
+! Timeout
+| The number of milliseconds to wait for data (INFINITE to wait forever)
+|-
+! Count
+| The number of bytes available on return
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
 |-
 |}
@@ Line 113: / Line 795: @@
 <br />
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
-<pre style="border: 0; padding-bottom:0px;">function SerialDeviceProperties(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;</pre>
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceFlush(Serial:PSerialDevice; Flags:LongWord):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Discard the contents of the receive and/or transmit buffers of a Serial device</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Serial
-| To be documented
+| The Serial device to flush
+|-
+! Flags
+| The flags to indicate what to flush (eg SERIAL_FLUSH_RECEIVE)
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceStatus(Serial:PSerialDevice):LongWord; inline;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the current line status of a Serial device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Serial
+| The Serial device to get the status from
+|-
+! Return
+| A set of flags containing the device status (eg SERIAL_STATUS_RTS)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceGetStatus(Serial:PSerialDevice):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the current line status of a Serial device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Serial
+| The Serial device to get the status from
+|-
+! Return
+| A set of flags containing the device status (eg SERIAL_STATUS_RTS)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceSetStatus(Serial:PSerialDevice; Status:LongWord):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Set the current line status of a Serial device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Serial
+| The Serial device to set the status for
+|-
+! Status
+| The device status flags to be set (eg SERIAL_STATUS_RTS)
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
+|-
+! Note
+| Not all SERIAL_STATUS_* flags can be set, the device may ignore invalid values.
+Not all serial devices support set status, returns ERROR_CALL_NOT_IMPLEMENTED if not supported.
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceProperties(Serial:PSerialDevice; Properties:PSerialProperties):LongWord; inline;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the properties for the specified Serial device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Serial
+| The Serial device to get properties from
+|-
+! Properties
+| Pointer to a PSerialProperties structure to fill in
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
+|-
+! Note
+| Replaced by SerialDeviceGetProperties for consistency
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceGetProperties(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the properties for the specified Serial device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Serial
+| The Serial device to get properties from
+|-
+! Properties
+| Pointer to a PSerialProperties structure to fill in
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceSetProperties(Serial:PSerialDevice; Properties:PSerialProperties):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Set the properties for the specified Serial device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Serial
+| The Serial device to set properties for
+|-
+! Properties
+| Pointer to a PSerialProperties structure to use
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
 |-
 |}
@@ Line 130: / Line 927: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Return'''
+! Return
 | Pointer to new Serial entry or nil if Serial could not be created
 |-
@@ Line 142: / Line 939: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Size'''
+! Size
 | Size in bytes to allocate for new Serial (Including the Serial entry)
 |-
-! '''Return'''
+! Return
 | Pointer to new Serial entry or nil if Serial could not be created
 |-
@@ Line 157: / Line 954: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Serial
-| To be documented
+| The serial device to destroy
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
 |-
 |}
@@ Line 169: / Line 969: @@
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Serial
-| To be documented
+| The serial device to register
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceDeregister(Serial:PSerialDevice):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Deregister a Serial from the Serial table</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Serial
+| The serial device to deregister
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
 |-
 |}
@@ Line 177: / Line 995: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialDeviceFind(SerialId:LongWord):PSerialDevice;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Find a serial device by Id in the serial table</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! SerialId
-| To be documented
+| The Id number of the serial to find
+|-
+! Return
+| Pointer to serial device entry or nil if not found
 |-
 |}
@@ Line 189: / Line 1,010: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialDeviceFindByName(const Name:String):PSerialDevice; inline;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Find a serial device by name in the serial table</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Name
-| To be documented
+| The name of the serial to find (eg Serial0)
+|-
+! Return
+| Pointer to serial device entry or nil if not found
 |-
 |}
@@ Line 201: / Line 1,025: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialDeviceFindByDescription(const Description:String):PSerialDevice; inline;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Find a serial device by description in the serial table</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Description
-| To be documented
+| The description of the serial to find (eg BCM2836 PL011 UART)
+|-
+! Return
+| Pointer to serial device entry or nil if not found
 |-
 |}
@@ Line 213: / Line 1,040: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialDeviceEnumerate(Callback:TSerialEnumerate; Data:Pointer):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Enumerate all serial devices in the serial table</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Callback
-| To be documented
+| The callback function to call for each serial in the table
+|-
+! Data
+| A private data pointer to pass to callback for each serial in the table
+|-
+! Return
+| ERROR_SUCCESS if completed or another error code on failure
 |-
 |}
@@ Line 225: / Line 1,058: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialDeviceNotification(Serial:PSerialDevice; Callback:TSerialNotification; Data:Pointer; Notification,Flags:LongWord):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Register a notification for serial device changes</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Serial
-| To be documented
+| The serial device to notify changes for (Optional, pass nil for all serial devices)
+|-
+! Callback
+| The function to call when a notification event occurs
+|-
+! Data
+| A private data pointer to pass to callback when a notification event occurs
+|-
+! Notification
+| The events to register for notification of (eg DEVICE_NOTIFICATION_REGISTER)
+|-
+! Flags
+| The flags to control the notification (eg NOTIFIER_FLAG_WORKER)
 |-
 |}
@@ Line 240: / Line 1,085: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialLoggingStart(Logging:PLoggingDevice):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Implementation of LoggingDeviceStart API for Serial Logging</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| To be documented
+| Not intended to be called directly by applications, use LoggingDeviceStart instead.
 |-
 |}
@@ Line 252: / Line 1,097: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialLoggingStop(Logging:PLoggingDevice):LongWord;</pre>
-<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Implementation of LoggingDeviceStop API for Serial Logging</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| To be documented
+| Not intended to be called directly by applications, use LoggingDeviceStop instead.
 |-
 |}
@@ Line 264: / Line 1,109: @@
 <div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 <pre style="border: 0; padding-bottom:0px;">function SerialLoggingOutput(Logging:PLoggingDevice; const Data:String):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Implementation of LoggingDeviceOutput API for Serial Logging</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Not intended to be called directly by applications, use LoggingDeviceOutput instead.
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialLoggingSetTarget(Logging:PLoggingDevice; const Target:String):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Implementation of LoggingDeviceSetTarget API for Serial Logging</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Not intended to be called directly by applications, use LoggingDeviceSetTarget instead.
+|-
+|}
+</div></div>
+<br />
+'''RTL text IO functions'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SysTextIOReadChar(var ACh:Char; AUserData:Pointer):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Handler for platform TextIOReadChar function</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Not intended to be called directly by applications
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SysTextIOWriteChar(ACh:Char; AUserData:Pointer):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Handler for platform TextIOWriteChar function</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Not intended to be called directly by applications
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SysTextIOWriteBuffer(ABuffer:PChar; ACount:LongInt; AUserData:Pointer):LongInt;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Handler for platform TextIOWriteBuffer function</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Not intended to be called directly by applications
+|-
+|}
+</div></div>
+<br />
+'''RTL serial functions'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SysSerialAvailable:Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Check if a Serial device is available</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SysSerialOpen(BaudRate,DataBits,StopBits,Parity,FlowControl,ReceiveDepth,TransmitDepth:LongWord):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Open the default Serial device ready for sending and receiving</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! BaudRate
+| Baud rate for the connection (eg 9600, 57600, 115200 etc)
+|-
+! DataBits
+| Size of the data (eg SERIAL_DATA_8BIT)
+|-
+! StopBits
+| Number of stop bits (eg SERIAL_STOP_1BIT)
+|-
+! Parity
+| Parity type for the data (eg SERIAL_PARITY_NONE)
+|-
+! FlowControl
+| Flow control for the connection (eg SERIAL_FLOW_NONE)
+|-
+! ReceiveDepth
+| Size of the receive buffer (0 = Default size)
+|-
+! TransmitDepth
+| Size of the transmit buffer (0 = Default size)
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SysSerialClose:LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Close the default Serial device and terminate sending and receiving</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SysSerialRead(Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Read data from the default Serial device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Buffer
+| Pointer to a buffer to receive the data
+|-
+! Size
+| The size of the buffer
+|-
+! Count
+| The number of bytes read on return
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SysSerialWrite(Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Write data to the default Serial device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Buffer
+| Pointer to a buffer of data to transmit
+|-
+! Size
+| The size of the buffer
+|-
+! Count
+| The number of bytes written on return
+|-
+|}
+</div></div>
+<br />
+'''Serial helper functions'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialGetCount:LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the current Serial count</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceGetDefault:PSerialDevice;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the current default Serial device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceSetDefault(Serial:PSerialDevice):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Set the current default Serial device</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceCheck(Serial:PSerialDevice):PSerialDevice;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Check if the supplied Serial is in the Serial table</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialTypeToString(SerialType:LongWord):String;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Convert a Serial type value to a string</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialStateToString(SerialState:LongWord):String;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Convert a Serial state value to a string</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceRedirectInput(Serial:PSerialDevice):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Redirect standard input to the serial device specified by Serial</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Serial
+| The serial device to redirect input to (or nil to stop redirection)
+|-
+! Return
+| True if completed successfully or False if an error occurred
+|-
+! Note
+| Redirects the input of the text file Input which also redirects the input of Read, ReadLn and the standard C library.
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDeviceRedirectOutput(Serial:PSerialDevice):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Redirect standard output to the serial device specified by Serial</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Serial
+| The serial device to redirect output to (or nil to stop redirection)
+|-
+! Return
+| True if completed successfully or False if an error occurred
+|-
+! Note
+| Redirects the output of the text files Output, ErrOutput, StdOut and StdErr which also redirects the output of Write, WriteLn and the standard C library.
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialBufferReadStart(Buffer:PSerialBuffer; var Available:LongWord):Pointer;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Return a pointer to the next read from the buffer and the number of bytes that can be read</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Caller must hold the lock on the serial device which owns the buffer
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialBufferReadComplete(Buffer:PSerialBuffer; Removed:LongWord):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Update the buffer to reflect the number of bytes removed when reading</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Caller must hold the lock on the serial device which owns the buffer
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialBufferWriteStart(Buffer:PSerialBuffer; var Available:LongWord):Pointer;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Return a pointer to the next write to the buffer and the number of bytes that can be written</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Caller must hold the lock on the serial device which owns the buffer
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialBufferWriteComplete(Buffer:PSerialBuffer; Added:LongWord):Boolean;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Update the buffer to reflect the number of bytes added when writing</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Caller must hold the lock on the serial device which owns the buffer
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure SerialLog(Level:LongWord; Serial:PSerialDevice; const AText:String);</pre>
 <div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
 <div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 {| class="wikitable" style="font-size: 14px; background: white;"
 |-
-! '''Note'''
+! Note
-| To be documented
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure SerialLogInfo(Serial:PSerialDevice; const AText:String); inline;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure SerialLogWarn(Serial:PSerialDevice; const AText:String); inline;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure SerialLogError(Serial:PSerialDevice; const AText:String); inline;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">procedure SerialLogDebug(Serial:PSerialDevice; const AText:String); inline;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialDataBitsToString(Parity:LongWord):String;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialStopBitsToString(Parity:LongWord):String;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialParityToString(Parity:LongWord):String;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialFlowControlToString(Flow:LongWord):String;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+'''Serial logging helper functions'''
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialLoggingDeviceAdd(Serial:PSerialDevice):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Add a new serial logging device on receipt of a device register notification</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialLoggingDeviceRemove(Serial:PSerialDevice):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Remove a serial logging device on receipt of a device deregister notification</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialLoggingDeviceParameters(Serial:PSerialDevice; const Parameters:String; var BaudRate,Parity,DataBits,StopBits:LongWord):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Break down the serial parameters value into component parts of baud rate, parity, data bits and stop bits</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| The parameters must be in the form 'BaudRate,Parity,DataBits,StopBits' (eg '115200,N,8,1')
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialLoggingFirstWord(var Value:String;const Delimiter:String):String;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' To be documented</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| None documented
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialLoggingDeviceEnum(Serial:PSerialDevice; Data:Pointer):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Enumeration callback for serial logging initialization</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Not intended to be called directly by applications
+|-
+|}
+</div></div>
+<br />
+<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
+<pre style="border: 0; padding-bottom:0px;">function SerialLoggingDeviceNotify(Device:PDevice; Data:Pointer; Notification:LongWord):LongWord;</pre>
+<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Notification callback for serial logging device creation or remove</div>
+<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
+{| class="wikitable" style="font-size: 14px; background: white;"
+|-
+! Note
+| Not intended to be called directly by applications
 |-
 |}