Difference between revisions of "Unit BCM2708"

From Ultibo.org
Jump to: navigation, search
Line 2,985: Line 2,985:
 
! Note
 
! Note
 
| The Id number supplied to this function may differ from the Ultibo device id value.
 
| The Id number supplied to this function may differ from the Ultibo device id value.
 +
|-
 +
|}
 +
</div></div>
 +
<br />
 +
<div class="toccolours mw-collapsible mw-collapsed" style="border: 1; font-family: arial; padding-top: 0px; padding-bottom: 15px;">
 +
<pre style="border: 0; padding-bottom:0px;">function BCM2708I2CSlaveGetDescription(Id:LongWord):String;</pre>
 +
<div style="font-size: 14px; padding-left: 12px;">'''Description:''' Get the device description of an I2C slave device</div>
 +
<div class="mw-collapsible-content" style="text-align: left; padding-left: 5px;">
 +
{| class="wikitable" style="font-size: 14px; background: white;"
 +
|-
 +
! Id
 +
| The Id number of the I2C slave device (Always 0)
 +
|-
 +
! Return
 +
| The correct device description suitable for passing to I2CSlaveFindByDescription
 +
|-
 +
! Note
 +
| The Id number supplied to this function may differ from the Ultibo device id value
 
|-
 
|-
 
|}
 
|}

Revision as of 04:43, 23 November 2022

Return to Unit Reference


Description

Ultibo BCM2708 Interface unit

This unit provides the BCM2708 specific implementations of the following devices:

  • SPI0
  • I2C0
  • I2C1
  • I2C2
  • SPI1
  • SPI2
  • I2C Slave
  • SPI Slave
  • DMA
  • PWM0
  • PWM1
  • PCM
  • GPIO
  • UART0
  • UART1
  • SDHCI (eMMC)
  • Clock
  • ARM Timer
  • Random
  • Mailbox
  • Watchdog
  • Framebuffer
  • MIPI CSI-2 (Camera Serial Interface)
  • DSI (Display Serial Interface)

BCM2708 SPI0 Device

The BCM2708 has a single master mode SPI controller that supports 3 wire, 2 wire and LoSSI modes of operation. It also has 2 auxiliary SPI masters which do not support DMA mode (see SPI1/2 below).

The main SPI0 controller supports polled, interrupt and DMA modes and includes 3 chip selects although only CS0 and 1 are available on the 26 or 40 pin header.

By default SPI0 can appear on GPIO pins 7 to 11 (CS1, CS0, MISO, MOSI, SCLK) using alternate function 0 or on GPIO pins 35 to 39 (CS1, CS0, MISO, MOSI, SCLK) using alternate function 0, only pins 7 to 11 are available on the header.

BCM2708 I2C0/1/2 Device

The BCM2708 has 3 Broadcom Serial Controller (BSC) devices which are fast mode (400Kz) masters numbered BSC0, BSC1 and BSC2.

Device BSC2 is dedicated to the HDMI interface but can be accessed by the ARM processor for controlling some HDMI functionality. All BSC devices contain a 16 byte FIFO, support 7 bit and 10 bit addressing and have software configurable clock timing.

By default BSC0 can appear on GPIO pins 0 and 1 (Alternate function 0), 28 and 29 (Alternate function 0) or 44 and 45 (Alternate function 1). Unfortunately on all except the Revision 1 models none of these pins are available on the 26 or 40 pin header.

Note: On the Raspberry Pi A+/B+/Zero/2B/3B the ID EEPROM pins on the 40 pin header are actually connected to GPIO 0 and 1 (BSC0)

Device BSC1 can appear on GPIO pins 2 and 3 (Alternate function 0) or 44 and 45 (Alternate function 2) but only pins 2 and 3 are exposed on the 26 or 40 pin header.

BCM2708 SPI1/2 Device

The BCM2708 has 2 additional SPI universal masters available as part of the AUX device which support interrupt mode but not DMA and therefore only allow limited bandwidth transfers due to the CPU overhead required to sustain high data rates.

Both devices support 3 chip selects, by default SPI1 is available on GPIO pins 16 to 21 (CS2, CS1, CS0, MISO, MOSI, SCLK) using alternate function 4 and SPI2 is available on GPIO pins 40 to 45 (MISO, MOSI, SCLK, CS0, CS1, CS2) using alternate function 4. Only pins 16 to 21 are available on the header and only on the 40 pin header of the Raspberry Pi A+/B+/Zero/2B/3B.

BCM2708 DMA Device

The DMA controller has 16 channels in total although not all are available for software to use as some are already used by the GPU.

The firmware will pass the value dma.dmachans on the command line which will indicate which channels are available for our use.

Channels 0 to 6 are normal channels which support 2D stride and transfers up to 1GB per control block

Channels 7 to 14 are Lite channels which do not support stride and only allow transfers up to 64KB per control block

Channel 15 is not mentioned in most documentation and is shown as not available in the mask passed in dma.dmachans

Channel 0 and 15 are Bulk channels which have an additional FIFO for faster transfers (8 beat burst per read)

BCM2708 PWM0/1 Device

The BCM2708 has a single PWM controller with 2 independent output bit streams with multiple algorithms for generating the output pulse. The PWM controller supports either a single data register (independent per channel) or a 16 x 32 FIFO which also supports DMA mode transmission.

On the Raspberry Pi PWM0 and PWM1 are also connected via GPIO pins 40 and 45 (40 and 41 on the Raspberry Pi 3B) to the audio circuit and allow playback of digital audio signals via the 3 or 4 pole line jack (depending on model).

PWM0 is available on GPIO pins 12 (function 0), 18 (function 5), 40 (function 0) and 52 (function 1).

PWM1 is available on GPIO pins 13 (function 0), 19 (function 5), 41, 45 (function 0) and 53 (function 1).

On the Raspberry Pi A and B only pin 18 is exposed on the 26 pin header.

On the Raspberry Pi A+/B+/Zero/2B/3B pins 12, 18 and 19 are exposed on the 40 pin header.

BCM2708 GPIO Device

The GPIO has 54 pins available each with multiple alternate functions. All pins can be configured as input or output and all can have pull up or down applied.

Not all pins are exposed on the 26 or 40 pin header of the Raspberry Pi, for details of which pins are available see:

Raspberry Pi A and B - https://www.raspberrypi.org/documentation/usage/gpio/README.md

Raspberry Pi A+/B+/2B/3B/Zero - https://www.raspberrypi.org/documentation/usage/gpio-plus-and-raspi2/README.md

Some of the 54 pins are used for peripheral communication (such as the SD card) and are not available for general use, take care when changing function selects on pins to avoid disabling certain system peripherals.

Event detection can be enabled for both high and low levels as well as rising and falling edges, there is also an asynchronous rising or falling edge detection which can detect edges of very short duration.

BCM2708 UART0 Device

The UART0 device is an ARM PL011 UART which supports programmable baud rates, start, stop and parity bits and hardware flow control and many others. The UART0 is similar to the industry standard 16C650 but with a number of differences, the PL011 has some optional features such as IrDA, Serial InfraRed and DMA which are not supported by the Broadcom implementation. In the standard configuration the UART0 TX and RX lines are connected to GPIO pins 14 and 15 respectively (Alternate function 0) but they can be remapped via GPIO function selects to a number of other locations. On the Raspberry Pi (all models) none of these alternate pin mappings are exposed via the 26 or 40 pin header and therefore cannot be used easily. This means that UART0 and UART1 cannot be used at the same time.

On the Raspberry Pi 3B the UART0 can be mapped to GPIO pins 32 and 33 (Alternate function 3) to communicate with the built in Bluetooth module.

BCM2708 UART1 Device

The UART1 device is a Broadcom implementation that is part of the AUX device which also includes the SPI1 and SPI2 devices. This device is termed a Mini UART and has a smaller feature set than the PL011 UART but still supports a fairly standard communication protocol with programmable baud rate and hardware flow control.

The Mini UART is similar to the standard 16550 device but is missing some of the features, the device also has no DMA support so high speed transfers will produce a higher CPU load. In the standard configuration the UART1 TX and RX lines are connected to GPIO pins 14 and 15 respectively (Alternate function 5) but they can be remapped via GPIO function selects to a number of other locations. On the Raspberry Pi (all models) none of these alternate pin mappings are exposed via the 26 or 40 pin header and therefore cannot be used easily. This means that UART0 and UART1 cannot be used at the same time.

On the Raspberry Pi 3B the UART1 can be mapped to GPIO pins 32 and 33 (Alternate function 5) to communicate with the built in Bluetooth module.

BCM2708 SDHCI Device

The SDHCI controller on the BCM2708 is an Arasan SD Host controller.

The Card Detect pin is connected to GPIO pin 47 (on the RPi Model A/B)(Not connected on the RPi Model A+/B+)

The Write Protect pin is not connected.

The device can be routed to GPIO pins 22 to 27 (ALT3) or 48 to 53 (ALT3), it can also be routed to GPIO pins 34 to 39 (ALT3) to provide an SDIO controller for the on board WiFi.

BCM2708 SDHOST Device

The SDHOST controller on the BCM2708 is a non SDHCI-compliant device which requires a specific driver.

It can be routed to GPIO pins 22 to 27 (ALT0) or 48 to 53 (ALT0) in order to control the SD card slot when the SDHCI device is being used for the on board WiFi.

Note: The actual driver is implemented in the BCMSDHOST unit.

BCM2708 Clock (System Timer) Device

The clock device in the BCM2708 is based on the System Timer which is a 64 bit free running counter that runs at 1MHz regardless of core or CPU clock speeds. The System Timer cannot be stopped and the counter cannot be set or reset.

The System Timer includes 4 compare registers which can each generate an interrupt when the compare value is matched, however 2 of the 4 are consumed by the GPU and on the Raspberry Pi A/B/A+/B+/Zero the other 2 are used for the scheduler and clock interrupts in Ultibo.

This device simply exposes the free running counter as a clock value and does not provide access to the timer compare functionality or to interrupt based events, for those see the timer devices below.

BCM2708 Clock (ARM Timer) Device

This device represents that free running counter from the ARM Timer device (below) as a clock device. The free running counter does not appear in the original SP804 timer. The counter is 32 bits wide and has its own divider that is 8 bits wide meaning that it can be set to clock rates of between 975KHz and 250MHz (or 1.5MHz to 400MHz on the Raspberry Pi 3B).

The counter does not generate an interrupt and cannot be set or reset but it can be stopped and started.

BCM2708 ARM Timer Device

The ARM Timer device in the BCM2708 is based on the ARM SP804 timer with some modifications and additions. In the Raspberry Pi it is connected to the core clock which by default is 250MHz but was increased to 400MHz on the Raspberry Pi 3B.

The divider is 10 bits wide which means that the ARM Timer can be set to clock rates of between 250KHz and 250MHz (or 400KHz to 400MHz on the Raspberry Pi 3B). Both the counter and the load/reload value are 32 bits wide by default giving a wide range of tick intervals.

The ARM Timer features a free running counter which is not enabled or used by this driver and a down counter which operates in wrapping mode so that each time it reaches 0 it triggers an interrupt and reloads the value from a load or reload register to begin counting again.

Constants


BCM2708 SPI0 BCM2708_SPI0_*
BCM2708_SPI0_DESCRIPTION = 'BCM2835 SPI0 Master';  
 
BCM2708_SPI0_MAX_SIZE = $FFFF;  
 
BCM2708_SPI0_MIN_CLOCK = 3814; Default minimum based on the default settings from the firmware (Recalculated during open)
BCM2708_SPI0_MAX_CLOCK = 125000000; Default maximum based on the default settings from the firmware (Recalculated during open)
 
BCM2708_SPI0_MIN_DIVIDER = 2; Divider is always rounded down to an even number and a value of 0 sets the divider to 65536
BCM2708_SPI0_MAX_DIVIDER = $FFFE; Divider is always rounded down to an even number
 
BCM2708_SPI0_CORE_CLOCK = 250000000; Default core clock based on the default settings from the firmware (Requested from firmware during start)
 
BCM2708_SPI0_MODE_IRQ = 0;  
BCM2708_SPI0_MODE_DMA = 1;  
BCM2708_SPI0_MODE_PIO = 2;  


BCM2708 BSCI2C (BSC0/1/2) BCM2708_BSCI2C_*
BCM2708_BSCI2C_MAX_SIZE = $FFFF;  
 
BCM2708_BSCI2C_MIN_CLOCK = 3814; Default minimum based on the default settings from the firmware (Recalculated during open)
BCM2708_BSCI2C_MAX_CLOCK = 125000000; Default maximum based on the default settings from the firmware (Recalculated during open)
BCM2708_BSCI2C_DEFAULT_CLOCK = 100000;  
 
BCM2708_BSCI2C_MIN_DIVIDER = 2; Divider is always rounded down to an even number and a value of 0 sets the divider to 32768
BCM2708_BSCI2C_MAX_DIVIDER = $FFFE; Divider is always rounded down to an even number
 
BCM2708_BSCI2C_CORE_CLOCK = 250000000; Default core clock based on the default settings from the firmware (Requested from firmware during start)
 
BCM2708_BSCI2C_MODE_WRITE = 0;  
BCM2708_BSCI2C_MODE_READ = 1;  


BCM2708 I2C0 (BSC0) BCM2708_I2C0_*
BCM2708_I2C0_DESCRIPTION = 'BCM2835 BSC0 Master I2C';  


BCM2708 I2C1 (BSC1) BCM2708_I2C1_*
BCM2708_I2C1_DESCRIPTION = 'BCM2835 BSC1 Master I2C';  


BCM2708 I2C2 (BSC2) BCM2708_I2C2_*
BCM2708_I2C2_DESCRIPTION = 'BCM2835 BSC2 Master I2C';  


BCM2708 SPI1 BCM2708_SPI1_*
BCM2708_SPI1_DESCRIPTION = 'BCM2835 AUX SPI1 Master';  


BCM2708 SPI2 BCM2708_SPI2_*
BCM2708_SPI2_DESCRIPTION = 'BCM2835 AUX SPI2 Master';  


BCM2708 I2C slave BCM2708_I2CSLAVE_*
BCM2708_I2CSLAVE_DESCRIPTION = 'BCM2835 I2C Slave';  


BCM2708 SPI slave BCM2708_SPISLAVE_*
BCM2708_SPISLAVE_DESCRIPTION = 'BCM2835 SPI Slave';  


BCM2708 DMA BCM2708_DMA_*
BCM2708_DMA_DESCRIPTION = 'BCM2835 DMA';  
 
BCM2708_DMA_CHANNEL_COUNT = 16; Total number of DMA channels (Not all are usable)
 
BCM2708_DMA_LITE_CHANNELS = $7F80; Mask of DMA Lite channels (7 to 14)
BCM2708_DMA_NORMAL_CHANNELS = $007E; {807F} Mask of normal channels (1 to 6)
BCM2708_DMA_BULK_CHANNELS = $8001; Mask of DMA Bulk channels (0 and 15)
 
BCM2708_DMA_SHARED_CHANNELS = $7800; Mask of channels with shared interrupt (11 to 14)
 
BCM2708_DMA_MAX_LITE_TRANSFER = 65536; Maximum transfer length for a DMA Lite channel
BCM2708_DMA_MAX_NORMAL_TRANSFER = 1073741824; Maximum transfer length for a normal channel
 
BCM2708_DMA_MAX_STRIDE = $FFFF; Maximum stride value (Increment between rows) (Note this is a signed value (Min -32768/Max 32767)
BCM2708_DMA_MAX_Y_COUNT = $3FFF; Maximum number of X length transfers in 2D stride
BCM2708_DMA_MAX_X_LENGTH = $FFFF; Maximum X transfer length in 2D stride
 
BCM2708_DMA_CB_ALIGNMENT = 32; Alignment required for DMA control blocks
 
BCM2708_DMA_LITE_BURST_LENGTH = 1; Burst length for DMA Lite channels
BCM2708_DMA_NORMAL_BURST_LENGTH = 2; Burst length for normal channels
BCM2708_DMA_BULK_BURST_LENGTH = 8; Burst length for DMA Bulk channels


BCM2708 PWM BCM2708_PWM_*
BCM2708_PWM_MIN_PERIOD = 108; Default based on 19.2MHz PWM clock (Oscillator source)
BCM2708_PWM_DEFAULT_CLOCK = 19200000; Default to the 19.2MHz oscillator clock


BCM2708 PWM0 BCM2708_PWM0_*
BCM2708_PWM0_DESCRIPTION = 'BCM2835 PWM0';  


BCM2708 PWM1 BCM2708_PWM1_*
BCM2708_PWM1_DESCRIPTION = 'BCM2835 PWM1';  


BCM2708 GPIO BCM2708_GPIO_*
BCM2708_GPIO_DESCRIPTION = 'BCM2835 GPIO';  
 
BCM2708_GPIO_MIN_PIN = GPIO_PIN_0;  
BCM2708_GPIO_MAX_PIN = GPIO_PIN_53;  
 
BCM2708_GPIO_MAX_LEVEL = GPIO_LEVEL_HIGH;  
 
BCM2708_GPIO_MAX_PULL = GPIO_PULL_DOWN;  
 
BCM2708_GPIO_MIN_FUNCTION = GPIO_FUNCTION_IN;  
BCM2708_GPIO_MAX_FUNCTION = GPIO_FUNCTION_ALT5;  
 
BCM2708_GPIO_MIN_TRIGGER = GPIO_TRIGGER_LOW;  
BCM2708_GPIO_MAX_TRIGGER = GPIO_TRIGGER_ASYNC_FALLING;  
 
GPIO pull up/down to BCM2835 pull up/down
BCM2708_GPIO_PULL_MAP:array[GPIO_PULL_NONE..GPIO_PULL_DOWN] of LongWord = (
BCM2835_GPPUD_NONE,  
BCM2835_GPPUD_UP,  
BCM2835_GPPUD_DOWN);  
 
GPIO functions to BCM2835 functions
BCM2708_GPIO_FUNCTION_MAP:array[BCM2708_GPIO_MIN_FUNCTION..BCM2708_GPIO_MAX_FUNCTION] of LongWord = (
BCM2835_GPFSEL_IN,  
BCM2835_GPFSEL_OUT,  
BCM2835_GPFSEL_ALT0,  
BCM2835_GPFSEL_ALT1,  
BCM2835_GPFSEL_ALT2,  
BCM2835_GPFSEL_ALT3,  
BCM2835_GPFSEL_ALT4,  
BCM2835_GPFSEL_ALT5);  
 
BCM2835 functions to GPIO functions
BCM2708_GPIO_FUNCTION_UNMAP:array[BCM2708_GPIO_MIN_FUNCTION..BCM2708_GPIO_MAX_FUNCTION] of LongWord = (
GPIO_FUNCTION_IN,  
GPIO_FUNCTION_OUT,  
GPIO_FUNCTION_ALT5,  
GPIO_FUNCTION_ALT4,  
GPIO_FUNCTION_ALT0,  
GPIO_FUNCTION_ALT1,  
GPIO_FUNCTION_ALT2,  
GPIO_FUNCTION_ALT3);  
 
GPIO triggers to BCM2835 event registers
BCM2708_GPIO_TRIGGER_MAP:array[BCM2708_GPIO_MIN_TRIGGER..BCM2708_GPIO_MAX_TRIGGER] of LongWord = (
GPIO_FUNCTION_IN,  
BCM2835_GPLEN0,  
BCM2835_GPHEN0,  
BCM2835_GPREN0,  
BCM2835_GPFEN0,  
BCM2835_GPAREN0,  
BCM2835_GPAFEN0);  


BCM2708 UART0 (PL011) BCM2708_UART0_*
BCM2708_UART0_DESCRIPTION = 'BCM2835 PL011 UART';  
 
BCM2708_UART0_MIN_BAUD = 300; Default minimum of 300 baud
BCM2708_UART0_MAX_BAUD = 187500; Default maximum based on the default settings from the firmware (Recalculated during open)
 
BCM2708_UART0_MIN_DATABITS = SERIAL_DATA_5BIT;  
BCM2708_UART0_MAX_DATABITS = SERIAL_DATA_8BIT;  
 
BCM2708_UART0_MIN_STOPBITS = SERIAL_STOP_1BIT;  
BCM2708_UART0_MAX_STOPBITS = SERIAL_STOP_2BIT;  
 
BCM2708_UART0_MAX_PARITY = SERIAL_PARITY_EVEN;  
 
BCM2708_UART0_MAX_FLOW = SERIAL_FLOW_RTS_CTS;  
 
BCM2708_UART0_CLOCK_RATE = 3000000; Default clock rate based on the default settings from the firmware (Requested from firmware during open)
 
BCM2708_UART0_RX_POLL_LIMIT = 256; Number of times interrupt handler may poll the read FIFO
BCM2708_UART0_RX_BUFFER_SIZE = 1024;  


BCM2708 UART1 (AUX) BCM2708_UART1_*
BCM2708_UART1_DESCRIPTION = 'BCM2835 AUX (Mini) UART';  


BCM2708 SDHCI BCM2708_EMMC_*
BCM2708_EMMC_DESCRIPTION = 'BCM2835 Arasan SD Host';  
 
BCM2708_EMMC_MIN_FREQ = 400000; Default minimum of 400KHz
BCM2708_EMMC_MAX_FREQ = 200000000; Default clock rate based on the default settings from the firmware (Requested from firmware during start)


BCM2708 SDHOST BCM2708_SDHOST_*
BCM2708_SDHOST_DESCRIPTION = 'BCM2835 SDHOST';  
 
BCM2708_SDHOST_MIN_FREQ = 400000; Default minimum of 400KHz
BCM2708_SDHOST_MAX_FREQ = 250000000; Default clock rate based on the default settings from the firmware (Requested from firmware during start)
See: BCMSDHOST for the driver implementation


BCM2708 clock (system timer) BCM2708_SYS_CLOCK_*
BCM2708_SYS_CLOCK_DESCRIPTION = 'BCM2835 System Timer Clock';  


BCM2708 clock (ARM timer) BCM2708_ARM_CLOCK_*
BCM2708_ARM_CLOCK_DESCRIPTION = 'BCM2835 ARM Timer Clock';  
 
BCM2708_ARM_CLOCK_MIN_RATE = 976562; Default minimum (Divider 255) based on the default settings from the firmware (Recalculated during start)
BCM2708_ARM_CLOCK_MAX_RATE = 250000000; Default maximum (Divider 0) based on the default settings from the firmware (Recalculated during start)
BCM2708_ARM_CLOCK_DEFAULT_RATE = 3968253; Default rate (Divider 62) based on the default settings from the firmware (Recalculated during start)
 
BCM2708_ARM_CLOCK_MIN_DIVIDER = 0;  
BCM2708_ARM_CLOCK_MAX_DIVIDER = 255;  
BCM2708_ARM_CLOCK_DEFAULT_DIVIDER = 62;  
 
BCM2708_ARM_CLOCK_CORE_CLOCK = 250000000; Default core clock based on the default settings from the firmware (Requested from firmware during start)


BCM2708 ARM timer BCM2708_ARM_TIMER_*
BCM2708_ARM_TIMER_DESCRIPTION = 'BCM2835 ARM Timer';  
 
BCM2708_ARM_TIMER_MIN_RATE = 244140; Default minimum (Divider 1023) based on the default settings from the firmware (Recalculated during start)
BCM2708_ARM_TIMER_MAX_RATE = 250000000; Default maximum (Divider 0) based on the default settings from the firmware (Recalculated during start)
BCM2708_ARM_TIMER_DEFAULT_RATE = 1000000; Default rate (Divider 249) based on the default settings from the firmware (Recalculated during start)
 
BCM2708_ARM_TIMER_MIN_INTERVAL = 1;  
BCM2708_ARM_TIMER_MAX_INTERVAL = $FFFFFFFF;  
 
BCM2708_ARM_TIMER_MIN_DIVIDER = 0;  
BCM2708_ARM_TIMER_MAX_DIVIDER = 1023;  
BCM2708_ARM_TIMER_DEFAULT_DIVIDER = 249;  
 
BCM2708_ARM_TIMER_CORE_CLOCK = 250000000; Default core clock based on the default settings from the firmware (Requested from firmware during start)


BCM2708 random BCM2708_RANDOM_*
BCM2708_RANDOM_DESCRIPTION = 'BCM2835 Random Number Generator';  
 
BCM2708_RANDOM_WARMUP_COUNT = $00040000; The initial numbers generated are "less random" so will be discarded


BCM2708 mailbox BCM2708_MAILBOX_*
BCM2708_MAILBOX_DESCRIPTION = 'BCM2835 Mailbox';  


BCM2708 watchdog BCM2708_WATCHDOG_*
BCM2708_WATCHDOG_DESCRIPTION = 'BCM2835 Watchdog Timer';  


BCM2708 framebuffer BCM2708_FRAMEBUFFER_*
BCM2708_FRAMEBUFFER_DESCRIPTION = 'BCM2835 Framebuffer';  


Type definitions


BCM2708 SPI0

PBCM2708SPI0Device = ^TBCM2708SPI0Device;

TBCM2708SPI0Device = record

SPI Properties
SPI:TSPIDevice;  
BCM2708 Properties
Address:Pointer; Device register base address
CoreClock:LongWord; Core clock rate
Transfer Properties
Mode:LongWord; Mode of current transfer (BCM2708_SPI0_MODE_IRQ/BCM2708_SPI0_MODE_DMA / BCM2708_SPI0_MODE_PIO)
Source:Pointer; Pointer to the source for current transfer (nil if reading only)
Dest:Pointer; Pointer to the destination for current transfer (nil if writing only)
Count:LongWord; Count of bytes for current transfer
SourceRemain:LongWord; Source bytes remaining for current transfer
DestRemain:LongWord; Destination bytes remaining for current transfer
Statistics Properties
InterruptCount:LongWord; Number of interrupt requests received by the device

BCM2708 BSCI2C (I2C0/1/2) device

PBCM2708BSCI2CDevice = ^TBCM2708BSCI2CDevice;

TBCM2708BSCI2CDevice = record

I2C Properties
I2C:TI2CDevice;  
BCM2708 Properties
Address:Pointer; Device register base address
CoreClock:LongWord; Core clock rate
SDAPin:LongWord; GPIO pin for the SDA line
SCLPin:LongWord; GPIO pin for the SCL line
SDAFunction:LongWord; GPIO function for the SDA line
SCLFunction:LongWord; GPIO function for the SCL line
Transfer Properties
Index:LongWord; Index of this device in the IRQData array (Set during device initialization)
Mode:LongWord; Mode of current transfer (BCM2708_BSCI2C_MODE_WRITE/BCM2708_BSCI2C_MODE_READ)
Data:Pointer; Pointer to the data for current transfer
Count:LongWord; Count of bytes for current transfer
Remain:LongWord; Bytes remaining for current transfer
Error:LongBool; True if an error occurred during the transfer
Statistics Properties
InterruptCount:LongWord; Number of interrupt requests received by the device

BCM2708 BSCI2C (I2C0/1) IRQ data

PBCM2708BSCI2CIRQData = ^TBCM2708BSCI2CIRQData;

TBCM2708BSCI2CIRQData = record

Note: BSC I2C devices share a single interrupt
Count:LongWord;  
Lock:TSpinHandle;  
Devices:array[0..2] of PBCM2708BSCI2CDevice;  

BCM2708 SPI AUX (SPI1/2)

PBCM2708SPIAUXDevice = ^TBCM2708SPIAUXDevice;

TBCM2708SPIAUXDevice = record

SPI Properties
SPI:TSPIDevice;  
BCM2708 Properties
Address:Pointer; Device register base address
CoreClock:LongWord; Core clock rate

BCM2708 DMA channel

PBCM2708DMAChannel = ^TBCM2708DMAChannel;

TBCM2708DMAChannel = record

Host:PBCM2708DMAHost; DMA host this channel belongs to
Request:PDMARequest; Current DMA request pending on this channel (or nil of no request is pending)
Number:LongWord; The channel number of this channel
Interrupt:LongWord; The interrupt number of this channel
Registers:PBCM2835DMARegisters; The channel registers for configuration

BCM2708 DMA

PBCM2708DMAHost = ^TBCM2708DMAHost;

TBCM2708DMAHost = record

DMA Properties
DMA:TDMAHost;  
BCM2708 Properties
ChannelMask:LongWord; Mask of available channels (Passed from GPU firmware)
ChannelFree:LongWord; Bitmap of current free channels
ChannelLock:TMutexHandle; Lock for access to ChannelFree
ChannelWait:TSemaphoreHandle; Number of free normal channels in ChannelFree
ChannelLite:TSemaphoreHandle; Number of free DMA Lite channels in ChannelFree
ChannelBulk:TSemaphoreHandle; Number of free DMA Bulk channels in ChannelFree
Channels:array[0..BCM2708_DMA_CHANNEL_COUNT - 1] of TBCM2708DMAChannel; Channel information for each DMA channel on the host
EnableRegister:PLongWord;  
InterruptRegister:PLongWord;  
Statistics Properties
InterruptCount:LongWord; Number of interrupt requests received by the host controller

BCM2708 PWM device

PBCM2708PWMDevice = ^TBCM2708PWMDevice;

TBCM2708PWMDevice = record

PWM Properties
PWM:TPWMDevice;  
BCM2708 Properties
Address:Pointer; Device register base address
Channel:LongWord; Channel for this device
Scaler:LongWord; Scaler for Duty cycle and Period
Pair:PBCM2708PWMDevice; The paired PWM device for the other channel
Audio Properties
Audio:PBCM2708PWMAudio; The associated PWM Audio device

BCM2708 PWM audio

PBCM2708PWMAudio = ^TBCM2708PWMAudio;

TBCM2708PWMAudio = record

Audio Properties
Audio:TAudioDevice;  
PWM Properties
PWM0:PBCM2708PWMDevice; The PWM device for channel 0
PWM1:PBCM2708PWMDevice; The PWM device for channel 1

BCM2708 GPIO

PBCM2708GPIOBank = ^TBCM2708GPIOBank;

TBCM2708GPIOBank = record

GPIO:PGPIODevice;  
Bank:LongWord;  
Address:PtrUInt;  
PinStart:LongWord;  

BCM2708 GPIO device

PBCM2708GPIODevice = ^TBCM2708GPIODevice;

TBCM2708GPIODevice = record

GPIO Properties
GPIO:TGPIODevice;  
BCM2708 Properties
Lock:TSpinHandle; Device lock (Differs from lock in Device portion) (Spin lock due to use by interrupt handler)
Banks:array[0..BCM2835_GPIO_BANK_COUNT - 1] of TBCM2708GPIOBank;  
Statistics Properties
InterruptCount:LongWord; Number of interrupt requests received by the device

BCM2708 UART0

PBCM2708UART0Device = ^TBCM2708UART0Device;

TBCM2708UART0Device = record

UART Properties
UART:TUARTDevice;  
BCM2708 Properties
Address:Pointer; Device register base address
ClockRate:LongWord; Device clock rate
 
Start:LongWord; Index of first available buffer entry
Count:LongWord; Number of available entries in the buffer
Buffer:array[0..(BCM2708_UART0_RX_BUFFER_SIZE - 1)] of Word; Buffer for received data (Includes data and status)
Statistics Properties
InterruptCount:LongWord; Number of interrupt requests received by the device

BCM2708 SDHCI

PBCM2708SDHCIHost = ^TBCM2708SDHCIHost;

TBCM2708SDHCIHost = record

SDHCI Properties
SDHCI:TSDHCIHost;  
BCM2708 Properties
SDIO:LongBool;  
WriteDelay:LongWord;  
DelayClock:LongWord;  
ShadowRegister:LongWord;  

BCM2708 system clock

PBCM2708SystemClock = ^TBCM2708SystemClock;

TBCM2708SystemClock = record

Clock Properties
Clock:TClockDevice;  

BCM2708 ARM clock

PBCM2708ARMClock = ^TBCM2708ARMClock;

TBCM2708ARMClock = record

Clock Properties
Clock:TClockDevice;  
BCM2708 Properties
CoreClock:LongWord; Core clock rate

BCM2708 ARM timer

PBCM2708ARMTimer = ^TBCM2708ARMTimer;

TBCM2708ARMTimer = record

Timer Properties
Timer:TTimerDevice;  
BCM2708 Properties
CoreClock:LongWord; Core clock rate
Statistics Properties
InterruptCount:LongWord; Number of interrupt requests received by the device

BCM2708 random

PBCM2708Random = ^TBCM2708Random;

TBCM2708Random = record

Random Properties
Random:TRandomDevice;  

BCM2708 mailbox

PBCM2708Mailbox = ^TBCM2708Mailbox;

TBCM2708Mailbox = record

Mailbox Properties
Mailbox:TMailboxDevice;  

BCM2708 watchdog

PBCM2708Watchdog = ^TBCM2708Watchdog;

TBCM2708Watchdog = record

Watchdog Properties
Watchdog:TWatchdogDevice;  

BCM2708 framebuffer

PBCM2708Framebuffer = ^TBCM2708Framebuffer;

TBCM2708Framebuffer = record

Framebuffer Properties
Framebuffer:TFramebufferDevice;  
BCM2708 Properties
MultiDisplay:LongBool;  
DisplayNum:LongWord;  
DisplaySettings:TDisplaySettings;  


Public variables

None defined

Function declarations


Initialization functions 

procedure BCM2708Init;
Description: To be documented
Note None documented


BCM2708 SPI0 functions 

function BCM2708SPI0Start(SPI:PSPIDevice; Mode,ClockRate,ClockPhase,ClockPolarity:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708SPI0Stop(SPI:PSPIDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708SPI0WriteRead(SPI:PSPIDevice; ChipSelect:Word; Source,Dest:Pointer; Size,Flags: LongWord; var Count:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708SPI0SetMode(SPI:PSPIDevice; Mode:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708SPI0SetClockRate(SPI:PSPIDevice; ChipSelect:Word; ClockRate:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708SPI0SetClockPhase(SPI:PSPIDevice; ClockPhase:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708SPI0SetClockPolarity(SPI:PSPIDevice; ClockPolarity:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708SPI0SetSelectPolarity(SPI:PSPIDevice; ChipSelect:Word; SelectPolarity:LongWord):LongWord;
Description: To be documented
Note None documented 


procedure BCM2708SPI0ReadFIFO(SPI:PBCM2708SPI0Device);
Description: Caller will hold the SPI device lock
Note Called from within the interrupt handler 


procedure BCM2708SPI0WriteFIFO(SPI:PBCM2708SPI0Device);
Description: Caller will hold the SPI device lock
Note Called from within the interrupt handler 


procedure BCM2708SPI0InterruptHandler(SPI:PBCM2708SPI0Device);
Description: To be documented
Note None documented 


procedure BCM2708SPI0DMARequestCompleted(Request:PDMARequest);
Description: DMA Request completion callback for SPI0
Note None documented


BCM2708 BSCI2C (I2C0/1/2) functions 

function BCM2708BSCI2CStart(I2C:PI2CDevice; Rate:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708BSCI2CStop(I2C:PI2CDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708BSCI2CRead(I2C:PI2CDevice; Address:Word; Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708BSCI2CWrite(I2C:PI2CDevice; Address:Word; Buffer:Pointer; Size:LongWord; var Count:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708BSCI2CWriteRead(I2C:PI2CDevice; Address:Word; Initial:Pointer; Len:LongWord; Data:Pointer; Size:LongWord; var Count:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708BSCI2CWriteWrite(I2C:PI2CDevice; Address:Word; Initial:Pointer; Len:LongWord; Data:Pointer; Size:LongWord; var Count:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708BSCI2CSetRate(I2C:PI2CDevice; Rate:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708BSCI2CSetAddress(I2C:PI2CDevice; Address:Word):LongWord;
Description: To be documented
Note None documented 


procedure BCM2708BSCI2CFillFIFO(I2C:PBCM2708BSCI2CDevice);
Description: Caller will hold the I2C device lock
Note Called from within the interrupt handler 


procedure BCM2708BSCI2CDrainFIFO(I2C:PBCM2708BSCI2CDevice);
Description: Caller will hold the I2C device lock
Note Called from within the interrupt handler 


procedure BCM2708BSCI2CInterruptHandler(IRQData:PBCM2708BSCI2CIRQData);
Description: To be documented
Note Thread submitting the current request will hold the I2C device lock


BCM2708 DMA functions 

function BCM2708DMAHostStart(DMA:PDMAHost):LongWord;
Description: To be documented
Note None documented 


function BCM2708DMAHostStop(DMA:PDMAHost):LongWord;
Description: To be documented
Note None documented 


function BCM2708DMAHostSubmit(DMA:PDMAHost; Request:PDMARequest):LongWord;
Description: To be documented
Note None documented 


function BCM2708DMAHostCancel(DMA:PDMAHost; Request:PDMARequest):LongWord;
Description: To be documented
Note None documented 


procedure BCM2708DMAInterruptHandler(Channel:PBCM2708DMAChannel);
Description: DMA Channels 0 to 10 each have a dedicated interrupt, this handler simply clears the interrupt and sends a completion on the associated channel
Note None documented 


procedure BCM2708DMASharedInterruptHandler(DMA:PBCM2708DMAHost);
Description: DMA Channels 11 to 14 share a common interrupt, this alternate handler determines which ones triggered the current interrupt and sends a completion on that channel
Note None documented 


procedure BCM2708DMARequestComplete(Channel:PBCM2708DMAChannel);
Description: To be documented
Note None documented 


function BCM2708DMAPeripheralToDREQ(Peripheral:LongWord):LongWord;
Description: To be documented
Note None documented 


procedure BCM2708DMADataToControlBlock(Request:PDMARequest; Data:PDMAData; Block:PBCM2835DMAControlBlock; Bulk,Lite:Boolean);
Description: To be documented
Note None documented


BCM2708 PWM0/1 functions 

function BCM2708PWMStart(PWM:PPWMDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMStop(PWM:PPWMDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMWrite(PWM:PPWMDevice; Value:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMSetGPIO(PWM:PPWMDevice; GPIO:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMResetGPIO(PWM:PPWMDevice; GPIO:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMSetMode(PWM:PPWMDevice; Mode:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMSetRange(PWM:PPWMDevice; Range:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMSetFrequency(PWM:PPWMDevice; Frequency:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMSetPolarity(PWM:PPWMDevice; Polarity:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMConfigure(PWM:PPWMDevice; DutyNS,PeriodNS:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMClockStart(PWM:PPWMDevice; Frequency:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMClockStop(PWM:PPWMDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708PWMClockEnabled(PWM:PPWMDevice):Boolean;
Description: To be documented
Note None documented


BCM2708 GPIO functions 

function BCM2708GPIOStart(GPIO:PGPIODevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708GPIOStop(GPIO:PGPIODevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708GPIORead(GPIO:PGPIODevice;Reg:LongWord):LongWord;
Description: To be documented
Note None documented 


procedure BCM2708GPIOWrite(GPIO:PGPIODevice; Reg,Value:LongWord);
Description: To be documented
Note None documented 


function BCM2708GPIOInputGet(GPIO:PGPIODevice; Pin:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708GPIOInputWait(GPIO:PGPIODevice; Pin,Trigger,Timeout:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708GPIOInputEvent(GPIO:PGPIODevice; Pin,Trigger,Flags,Timeout:LongWord; Callback:TGPIOCallback; Data:Pointer):LongWord;
Description: To be documented
Note None documented 


function BCM2708GPIOInputCancel(GPIO:PGPIODevice; Pin:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708GPIOOutputSet(GPIO:PGPIODevice; Pin,Level:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708GPIOPullSelect(GPIO:PGPIODevice; Pin,Mode:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708GPIOFunctionGet(GPIO:PGPIODevice; Pin:LongWord):LongWord;
Description: To be documented
Note None documented 


function BCM2708GPIOFunctionSelect(GPIO:PGPIODevice; Pin,Mode:LongWord):LongWord;
Description: To be documented
Note None documented 


procedure BCM2708GPIOInterruptHandler(Bank:PBCM2708GPIOBank);
Description: To be documented
Note None documented 


procedure BCM2708GPIOEventTrigger(Pin:PGPIOPin);
Description: To be documented
Note None documented 


procedure BCM2708GPIOEventTimeout(Event:PGPIOEvent);
Description: To be documented
Note None documented


BCM2708 UART0 functions 

function BCM2708UART0Open(UART:PUARTDevice; BaudRate,DataBits,StopBits,Parity,FlowControl:LongWord):LongWord;
Description: Implementation of UARTDeviceOpen API for BCM2708 UART0
Note Not intended to be called directly by applications, use UARTDeviceOpen instead. 


function BCM2708UART0Close(UART:PUARTDevice):LongWord;
Description: Implementation of UARTDeviceClose API for BCM2708 UART0
Note Not intended to be called directly by applications, use UARTDeviceClose instead. 


function BCM2708UART0Read(UART:PUARTDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: Implementation of UARTDeviceRead API for BCM2708 UART0
Note Not intended to be called directly by applications, use UARTDeviceRead instead. 


function BCM2708UART0PushRX(UART:PUARTDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708UART0Write(UART:PUARTDevice; Buffer:Pointer; Size,Flags:LongWord; var Count:LongWord):LongWord;
Description: Implementation of UARTDeviceWrite API for BCM2708 UART0
Note Not intended to be called directly by applications, use UARTDeviceWrite instead. 


function BCM2708UART0GetStatus(UART:PUARTDevice):LongWord;
Description: Implementation of UARTDeviceGetStatus API for BCM2708 UART0
Note Not intended to be called directly by applications, use UARTDeviceGetStatus instead. 


function BCM2708UART0SetStatus(UART:PUARTDevice; Status:LongWord):LongWord;
Description: Implementation of UARTDeviceSetStatus API for BCM2708 UART0
Note Not intended to be called directly by applications, use UARTDeviceSetStatus instead. 


procedure BCM2708UART0InterruptHandler(UART:PUARTDevice);
Description: Interrupt handler for the BCM2708 UART0 device
Note Not intended to be called directly by applications 


procedure BCM2708UART0Receive(UART:PUARTDevice);
Description: Receive handler for the BCM2708 UART0 device
Note Not intended to be called directly by applications 


procedure BCM2708UART0Transmit(UART:PUARTDevice);
Description: Transmit handler for the BCM2708 UART0 device
Note Not intended to be called directly by applications 


procedure BCM2708UART0EnableInterrupt(UART:PBCM2708UART0Device; Interrupt:LongWord);
Description: Enable the specified interrupt in the interrupt mask register of a BCM2708 UART0 device
UART The BCM2708 UART0 device to enable the interrupt for
Interrupt The interrupt to enable
Note Caller must hold the UART lock 


procedure BCM2708UART0DisableInterrupt(UART:PBCM2708UART0Device; Interrupt:LongWord);
Description: Disable the specified interrupt in the interrupt mask register of a BCM2708 UART0 device
UART The BCM2708 UART0 device to disable the interrupt for
Interrupt The interrupt to disable
Note Caller must hold the UART lock


BCM2708 SDHCI functions 

function BCM2708SDHCIHostStart(SDHCI:PSDHCIHost):LongWord;
Description: Implementation of SDHCIHostStart API for BCM2708 SDHCI
Note Not intended to be called directly by applications, use SDHCIHostStart instead. 


function BCM2708SDHCIHostStop(SDHCI:PSDHCIHost):LongWord;
Description: Implementation of SDHCIHostStop API for BCM2708 SDHCI
Note Not intended to be called directly by applications, use SDHCIHostStop instead. 


function BCM2708SDHCIHostLock(SDHCI:PSDHCIHost):LongWord;
Description: Implementation of SDHCIHostLock API for BCM2708 SDHCI
Note Not intended to be called directly by applications, use SDHCIHostLock instead. 


function BCM2708SDHCIHostUnlock(SDHCI:PSDHCIHost):LongWord;
Description: Implementation of SDHCIHostUnlock API for BCM2708 SDHCI
Note Not intended to be called directly by applications, use SDHCIHostUnlock instead. 


function BCM2708SDHCIHostReadByte(SDHCI:PSDHCIHost; Reg:LongWord):Byte;
Description: Implementation of SDHCIHostReadByte API for BCM2708 SDHCI
Note Not intended to be called directly by applications, use SDHCIHostReadByte instead.
Note The Broadcom document BCM2835-ARM-Peripherals page 66 states the following: Contrary to Arasans documentation the EMMC module registers can only be accessed as 32 bit registers, i.e. the two LSBs of the address are always zero. For this reason this code must simulate Byte and Word reads using LongWord reads. 


function BCM2708SDHCIHostReadWord(SDHCI:PSDHCIHost; Reg:LongWord):Word;
Description: Implementation of SDHCIHostReadWord API for BCM2708 SDHCI
Note Not intended to be called directly by applications, use SDHCIHostReadWord instead.
Note The Broadcom document BCM2835-ARM-Peripherals page 66 states the following: Contrary to Arasans documentation the EMMC module registers can only be accessed as 32 bit registers, i.e. the two LSBs of the address are always zero. For this reason this code must simulate Byte and Word reads using LongWord reads. 


function BCM2708SDHCIHostReadLong(SDHCI:PSDHCIHost; Reg:LongWord):LongWord;
Description: Implementation of SDHCIHostReadLong API for BCM2708 SDHCI
Note Not intended to be called directly by applications, use SDHCIHostReadLong instead. 


procedure BCM2708SDHCIHostWriteByte(SDHCI:PSDHCIHost; Reg:LongWord; Value:Byte);
Description: Implementation of SDHCIHostWriteByte API for BCM2708 SDHCI
Note Not intended to be called directly by applications, use SDHCIHostWriteByte instead.
Note The Broadcom document BCM2835-ARM-Peripherals page 66 states the following: Contrary to Arasans documentation the EMMC module registers can only be accessed as 32 bit registers, i.e. the two LSBs of the address are always zero. For this reason this code must simulate Byte and Word writes using LongWord writes. 


procedure BCM2708SDHCIHostWriteWord(SDHCI:PSDHCIHost; Reg:LongWord; Value:Word);
Description: Implementation of SDHCIHostWriteWord API for BCM2708 SDHCI
Note Not intended to be called directly by applications, use SDHCIHostWriteWord instead.
Note The Broadcom document BCM2835-ARM-Peripherals page 66 states the following: Contrary to Arasans documentation the EMMC module registers can only be accessed as 32 bit registers, i.e. the two LSBs of the address are always zero. For this reason this code must simulate Byte and Word writes using LongWord writes. 


procedure BCM2708SDHCIHostWriteLong(SDHCI:PSDHCIHost; Reg:LongWord; Value:LongWord);
Description: Implementation of SDHCIHostWriteLong API for BCM2708 SDHCI
Note Not intended to be called directly by applications, use SDHCIHostWriteLong instead.
Note The source code of U-Boot and Linux kernel drivers have this comment The Arasan has a bugette whereby it may lose the content of successive writes to registers that are within two SD-card clock cycles of each other (a clock domain crossing problem). It seems, however, that the data register does not have this problem. (Which is just as well - otherwise we'd have to nobble the DMA engine too) For this reason this code must delay after each write to the registers. 


procedure BCM2708SDHCIInterruptHandler(SDHCI:PSDHCIHost);
Description: Interrupt handler for the BCM2708 SDHCI host controller
Note Not intended to be called directly by applications 


function BCM2708SDHCISetupInterrupts(SDHCI:PSDHCIHost):LongWord;
Description: Configure and enable interrupt handling for the BCM2708 SDHCI
Note Not intended to be called directly by applications 


function BCM2708MMCDeviceGetCardDetect(MMC:PMMCDevice):LongWord;
Description: Implementation of MMC GetCardDetect for the BCM2708 which does not update the bits in the SDHCI_PRESENT_STATE register to reflect card insertion or removal
Note Not intended to be called directly by applications, use MMCDeviceGetCardDetect instead.


BCM2708 system clock functions 

function BCM2708SystemClockRead(Clock:PClockDevice):LongWord;
Description: Implementation of ClockDeviceRead API for System Clock
Note Not intended to be called directly by applications, use ClockDeviceRead instead. 


function BCM2708SystemClockRead64(Clock:PClockDevice):Int64;
Description: Implementation of ClockDeviceRead64 API for System Clock
Note Not intended to be called directly by applications, use ClockDeviceRead64 instead.


BCM2708 ARM clock functions 

function BCM2708ARMClockStart(Clock:PClockDevice):LongWord;
Description: Implementation of ClockDeviceStart API for ARM Clock
Note Not intended to be called directly by applications, use ClockDeviceStart instead. 


function BCM2708ARMClockStop(Clock:PClockDevice):LongWord;
Description: Implementation of ClockDeviceStop API for ARM Clock
Note Not intended to be called directly by applications, use ClockDeviceStop instead. 


function BCM2708ARMClockRead(Clock:PClockDevice):LongWord;
Description: Implementation of ClockDeviceRead API for ARM Clock
Note Not intended to be called directly by applications, use ClockDeviceRead instead. 


function BCM2708ARMClockRead64(Clock:PClockDevice):Int64;
Description: Implementation of ClockDeviceRead64 API for ARM Clock
Note Not intended to be called directly by applications, use ClockDeviceRead64 instead. 


function BCM2708ARMClockSetRate(Clock:PClockDevice; Rate:LongWord):LongWord;
Description: Implementation of ClockDeviceSetRate API for ARM Clock
Note Not intended to be called directly by applications, use ClockDeviceSetRate instead.


BCM2708 ARM timer functions 

function BCM2708ARMTimerStart(Timer:PTimerDevice):LongWord;
Description: Implementation of TimerDeviceStart API for ARM Timer
Note Not intended to be called directly by applications, use TimerDeviceStart instead. 


function BCM2708ARMTimerStop(Timer:PTimerDevice):LongWord;
Description: Implementation of TimerDeviceStop API for ARM Timer
Note Not intended to be called directly by applications, use TimerDeviceStop instead. 


function BCM2708ARMTimerRead64(Timer:PTimerDevice):Int64;
Description: Implementation of TimerDeviceRead64 API for ARM Timer
Note Not intended to be called directly by applications, use TimerDeviceRead64 instead. 


function BCM2708ARMTimerWait(Timer:PTimerDevice):LongWord;
Description: Implementation of TimerDeviceWait API for ARM Timer
Note Not intended to be called directly by applications, use TimerDeviceWait instead. 


function BCM2708ARMTimerEvent(Timer:PTimerDevice; Flags:LongWord; Callback:TTimerCallback; Data:Pointer):LongWord;
Description: Implementation of TimerDeviceEvent API for ARM Timer
Note Not intended to be called directly by applications, use TimerDeviceEvent instead. 


function BCM2708ARMTimerCancel(Timer:PTimerDevice):LongWord;
Description: Implementation of TimerDeviceCancel API for ARM Timer
Note Not intended to be called directly by applications, use TimerDeviceCancel instead. 


function BCM2708ARMTimerSetRate(Timer:PTimerDevice; Rate:LongWord):LongWord;
Description: Implementation of TimerDeviceSetRate API for ARM Timer
Note Not intended to be called directly by applications, use TimerDeviceSetRate instead. 


function BCM2708ARMTimerSetInterval(Timer:PTimerDevice; Interval:LongWord):LongWord;
Description: Implementation of TimerDeviceSetInterval API for ARM Timer
Note Not intended to be called directly by applications, use TimerDeviceSetInterval instead. 


procedure BCM2708ARMTimerInterruptHandler(Timer:PTimerDevice);
Description: Interrupt handler for ARM Timer
Note Not intended to be called directly by applications 


procedure BCM2708ARMTimerEventTrigger(Timer:PTimerDevice);
Description: Event handler for ARM Timer
Note Not intended to be called directly by applications


BCM2708 random functions 

function BCM2708RandomStart(Random:PRandomDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708RandomStop(Random:PRandomDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708RandomReadLongWord(Random:PRandomDevice):LongWord;
Description: To be documented
Note None documented


BCM2708 watchdog functions 

function BCM2708WatchdogStart(Watchdog:PWatchdogDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708WatchdogStop(Watchdog:PWatchdogDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708WatchdogRefresh(Watchdog:PWatchdogDevice):LongWord;
Description: To be documented
Note None documented 


function BCM2708WatchdogGetRemain(Watchdog:PWatchdogDevice):LongWord;
Description: To be documented
Note None documented


BCM2708 framebuffer functions 

function BCM2708FramebufferAllocate(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;
Description: Implementation of FramebufferDeviceAllocate API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceAllocate instead. 


function BCM2708FramebufferRelease(Framebuffer:PFramebufferDevice):LongWord;
Description: Implementation of FramebufferDeviceRelease API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceRelease instead. 


function BCM2708FramebufferBlank(Framebuffer:PFramebufferDevice; Blank:Boolean):LongWord;
Description: Implementation of FramebufferDeviceBlank API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceBlank instead. 


function BCM2708FramebufferCommit(Framebuffer:PFramebufferDevice;Address:PtrUInt;Size,Flags:LongWord):LongWord;
Description: Implementation of FramebufferDeviceCommit API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceCommit instead. 


function BCM2708FramebufferWaitSync(Framebuffer:PFramebufferDevice):LongWord;
Description: Implementation of FramebufferDeviceWaitSync API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceWaitSync instead. 


function BCM2708FramebufferSetOffset(Framebuffer:PFramebufferDevice; X,Y:LongWord; Pan:Boolean):LongWord;
Description: Implementation of FramebufferDeviceSetOffset API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceSetOffset instead. 


function BCM2708FramebufferGetPalette(Framebuffer:PFramebufferDevice; Palette:PFramebufferPalette):LongWord;
Description: Implementation of FramebufferDeviceGetPalette API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceGetPalette instead. 


function BCM2708FramebufferSetPalette(Framebuffer:PFramebufferDevice; Palette:PFramebufferPalette):LongWord;
Description: Implementation of FramebufferDeviceSetPalette API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceSetPalette instead. 


function BCM2708FramebufferSetBacklight(Framebuffer:PFramebufferDevice; Brightness:LongWord):LongWord;
Description: Implementation of FramebufferDeviceSetBacklight API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceSetBacklight instead. 


function BCM2708FramebufferSetCursor(Framebuffer:PFramebufferDevice; Width,Height,HotspotX,HotspotY:LongWord; Image:Pointer; Len:LongWord):LongWord;
Description: Implementation of FramebufferDeviceSetCursor API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceSetCursor instead. 


function BCM2708FramebufferUpdateCursor(Framebuffer:PFramebufferDevice; Enabled:Boolean; X,Y:LongInt; Relative:Boolean):LongWord;
Description: Implementation of FramebufferDeviceUpdateCursor API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceUpdateCursor instead. 


function BCM2708FramebufferSetProperties(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;
Description: Implementation of FramebufferDeviceSetProperties API for BCM2708 Framebuffer
Note Not intended to be called directly by applications, use FramebufferDeviceSetProperties instead.


BCM2708 helper functions 

function BCM2708SPIGetDescription(Id:LongWord):String;
Description: Get the device description of an SPI device
Id The Id number of the SPI device (0 to 2)
Return The correct device description suitable for passing to SPIDeviceFindByDescription
Note The Id number supplied to this function may differ from the Ultibo device id value. 


function BCM2708I2CGetDescription(Id:LongWord):String;
Description: Get the device description of an I2C device
Id The Id number of the I2C device (0 to 2)
Return The correct device description suitable for passing to I2CDeviceFindByDescription
Note The Id number supplied to this function may differ from the Ultibo device id value. 


function BCM2708I2CSlaveGetDescription(Id:LongWord):String;
Description: Get the device description of an I2C slave device
Id The Id number of the I2C slave device (Always 0)
Return The correct device description suitable for passing to I2CSlaveFindByDescription
Note The Id number supplied to this function may differ from the Ultibo device id value 


function BCM2708PWMGetDescription(Id,Channel:LongWord):String;
Description: Get the device description of a PWM device
Id The Id number of the PWM device (0 or 1)
Channel The channel number of the PWM device (0 or 1)
Return The correct device description suitable for passing to PWMDeviceFindByDescription
Note The Id number supplied to this function may differ from the Ultibo device id value. 


function BCM2708UARTGetDescription(Id:LongWord):String;
Description: Get the device description of a UART device
Id The Id number of the UART device (0 or 1)
Return The correct device description suitable for passing to UARTDeviceFindByDescription
Note The Id number supplied to this function may differ from the Ultibo device id value.


Return to Unit Reference

Retrieved from "https://ultibo.org/mediawiki_ultibo_org/index.php?title=Unit_BCM2708&oldid=5637"