Search found 2217 matches

by Ultibo
Sun Jun 16, 2019 10:03 am
Forum: General
Topic: cmdline.txt
Replies: 1
Views: 12

Re: cmdline.txt

I can get neither file logging nor current time zone set correctly. What am I doing wrong, or have I left out? (Filesystem unit is included). TIMEZONE_DEFAULT_NAME=Australian_Eastern_Standard_Time Hi, This one is simple enough, from the Timezone unit it looks like you need to use: TIMEZONE_DEFAULT_...
by Ultibo
Sat Jun 15, 2019 12:12 am
Forum: General
Topic: how can i want Static IP Address Change?
Replies: 1
Views: 20

Re: how can i want Static IP Address Change?

i want to change ip address = 192.168.60.33, netmask = 255.255.255.0, gateway = 192.168.60.1. how can i want Static IP Address Change? i know. no use cmdline.txt that change another IP Address. but i must use comdline.txt. Hello johan, I realise that English may not be your native language so I apo...
by Ultibo
Thu Jun 13, 2019 12:01 am
Forum: General
Topic: Booting from secondary SD card in Pi Zero?
Replies: 3
Views: 47

Re: Booting from secondary SD card in Pi Zero?

Would it be possible to boot from a second sd card board wired to a Pi zero through the GPIO pins? Booting from the secondary SD card is a function of the firmware that is burned into the SoC during manufacture. According to the documentation here it is supported by the SoC but not enabled in the c...
by Ultibo
Sun Jun 02, 2019 11:25 pm
Forum: Bug reports
Topic: {Request IRQ/FIQ}
Replies: 3
Views: 177

Re: {Request IRQ/FIQ}

rvanspaa wrote:Thanks for the explanation, and sorry to have troubled you. :oops:

No trouble at all, we really do want everyone to understand how Ultibo works so we're always happy to answer questions.
by Ultibo
Sun Jun 02, 2019 10:24 am
Forum: Bug reports
Topic: {Request IRQ/FIQ}
Replies: 3
Views: 177

Re: {Request IRQ/FIQ}

Perhaps I'm just too sleepy, but it looks to me as though when BCM2708GPIO_FIQ_ENABLED is enabled, and BCM2708GPIO_FIQ_BANK_NO = 1, two interrupts get set, one normal interrupt for BANK_NO = 0 (in the else branch), and the expected interrupt in the THEN branch of BANK_NO = 1. Am I missing something...
by Ultibo
Thu May 30, 2019 9:57 am
Forum: General
Topic: Official TouchScreen - Drawing Graphics
Replies: 6
Views: 295

Re: Official TouchScreen - Drawing Graphics

what unit contains the "GraphicsWindowDrawCircle" as I cant find it...... Hey Jeremy, Check out the GraphicsConsole unit which supports (simple) circles, lines, rectangles etc. A really quick and easy way to find things in the Ultibo source is to search on the Wiki or in the GitHub repo. ...
by Ultibo
Tue May 28, 2019 11:14 pm
Forum: General
Topic: SD Card Access Issue
Replies: 18
Views: 548

Re: SD Card Access Issue

As you explained, the problem was wrong bus condition in H/W We made lines shorter and same length for both DP and DM. we can see USB disk at D:\. i have tested several times and compared with SD card access. there is no problem and 2~4 times faster than SD card. That's a fantastic result SJ, thank...
by Ultibo
Mon May 27, 2019 10:31 am
Forum: General
Topic: Official TouchScreen - Drawing Graphics
Replies: 6
Views: 295

Re: Official TouchScreen - Drawing Graphics

Now, since I have an actual project to work on, I was wondering, can I still draw, say, a circle (or more than 1) on the screen? Also, is there a away to use larger fonts? Hi jscoulter, welcome to Ultibo! Because the Official touchscreen is driven by the GPU pretty much everything is available when...
by Ultibo
Thu May 23, 2019 11:53 pm
Forum: General
Topic: SD Card Access Issue
Replies: 18
Views: 548

Re: SD Card Access Issue

=> i have tested 3 usb disks. all usb disks show high-speed on the Rpi3, but all usb disks show full-speed on my target Board. That seems quite definitive, while it would be interesting to see what other devices show it would also be interesting to see what the LAN9514 and Hub device are detected a...
by Ultibo
Wed May 22, 2019 10:08 am
Forum: General
Topic: SD Card Access Issue
Replies: 18
Views: 548

Re: SD Card Access Issue

Finally, i have successed to get a syslog messages from target board with CM3L. ( USB Plug in after system initialized. ) Hello SJ, That's exactly what we need to see. I was in the process of creating a small example to show how to hook up logging to your Debug Console function but since you have i...

Go to advanced search